 extremePowerSupplyFail
| .1.3.6.1.4.1.1916.0.10 | One or more sources of power to this agent has failed.
Presumably a redundant power-supply has taken over. |
extremePowerSupplyGood
| .1.3.6.1.4.1.1916.0.11 | One or more previously bad sources of power to this agent
has come back to life without causing an agent restart. |
extremeRpsAlarm
| .1.3.6.1.4.1.1916.0.12 | Attached Redundant Power Supply device is indicating
an alarm condition. |
extremeRpsNoAlarm
| .1.3.6.1.4.1.1916.0.13 | Attached Redundant Power Supply device is no longer
indicating an alarm condition. |
extremeSmartTrap
| .1.3.6.1.4.1.1916.0.14 | Signifies that the value of one of the object identifiers
(or the value of an object below that in the MIB tree)
defined in the extremeSmartTrapRulesTable has changed,
and hence a new entry has been created in the
extremeSmartTrapInstanceTable. Such a trap is sent
at most once every thirty seconds if one or more entry
was created in the last thirty seconds. |
extremeModuleStateChanged
| .1.3.6.1.4.1.1916.0.15 | Signifies that the value of the extremeSlotModuleState for
the specified extremeSlotNumber has changed. |
extremeEsrpStateChange
| .1.3.6.1.4.1.1916.0.17 | Signifies Esrp state change |
| extremeSlbUnitAdded | .1.3.6.1.4.1.1916.0.18 | The server load balancer has activated a group of virtual
servers that it normally would not activate. This may be
due to the failure of another server load balancer. |
| extremeSlbUnitRemoved | .1.3.6.1.4.1.1916.0.19 | The server load balancer has deactivated a group of virtual
servers that it normally has active. This indicates that
something is wrong in the server load balancer; for example,
its ping check may be failing. |
extremeEdpNeighborAdded
| .1.3.6.1.4.1.1916.0.20 | This node discovers a new neighbor through Extreme Discovery
Protocol. |
extremeEdpNeighborRemoved
| .1.3.6.1.4.1.1916.0.21 | No EDP updates are received from this neighbor within
the configured timeout period and this neighbor entry is aged
out by the device. |
extremeCpuHealthCheckFailed
| .1.3.6.1.4.1.1916.0.22 | Cpu HealthCheck has failed.
This trap is supported only in ExtremeWare. |
extremeOverheat
| .1.3.6.1.4.1.1916.0.6 | A overheat trap indicates that the on board
tempature sensor has reported a overheat
condition. System will shutdown until unit has
suficiently cooled such that operation may begin
again. A cold start trap will be issued when
the unit has come back on line. |
extremeFanfailed
| .1.3.6.1.4.1.1916.0.7 | A fan failed trap indicates one or more of the
cooling fans inside the device has failed. A
fanOK trap will be sent once the fan has attained
normal operation. |
extremeFanOK
| .1.3.6.1.4.1.1916.0.8 | A fan has transitioned out of a failure state and
is now operating correctly. |
extremeInvalidLoginAttempt
| .1.3.6.1.4.1.1916.0.9 | A user attempted to login to console or by telnet but was
refused access due to incorrect username or password |
extremenetworks 