EXTREME-EAPS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
47
extremeEapsTable
table.1.3.6.1.4.1.1916.1.18.1
·
1 row entry
·
17 columns
Uses the extreme variant from
Command help
/opt/observium/mibs/extreme.
Walk extremeEapsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EXTREME-EAPS-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EXTREME-EAPS-MIB::extremeEapsTable'
This table contains EAPS information about all EAPS domains on this device.
An individual entry of this table contains EAPS
information related to that EAPS domain.
information related to that EAPS domain.
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| extremeEapsNameThe EAPS domain name. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.1916.1.18.1.1.1 | ||||||||||||||||||
| extremeEapsModeThis indicates the mode of the EAPS domain. | EapsDomainModer/w Type Values:
| .1.3.6.1.4.1.1916.1.18.1.1.2 | ||||||||||||||||||
| extremeEapsStateThis indicates the current EAPS state of this EAPS domain. | EapsDomainState Type Values:
| .1.3.6.1.4.1.1916.1.18.1.1.3 | ||||||||||||||||||
| extremeEapsFailedFlagThis indicates the status of the failed flag. If the failed timer expires while its expiry action is configured to sendAlert, this failed flag is set. It is then cleared when the failed timer stops expiring, or the exp… | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.1916.1.18.1.1.4 | ||||||||||||||||||
| extremeEapsEnabledThis indicated if this domain has been enabled or not. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.1916.1.18.1.1.5 | ||||||||||||||||||
| extremeEapsPrimaryPortThis indicates the EAPS domain's primary ring-port. Value of 0 indicates the primary port is still not configured | EapsRingPortr/w Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.1916.1.18.1.1.6 | ||||||||||||||||||
| extremeEapsSecondaryPortThis indicates the EAPS domain's secondary ring-port. Value of 0 indicates the secondary port is still not configured | EapsRingPortr/w Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.1916.1.18.1.1.7 | ||||||||||||||||||
| extremeEapsHelloTimerThis indicates the EAPS domain's hello timer's value in seconds. | Integer32r/w Constraints: range: 0-15 | .1.3.6.1.4.1.1916.1.18.1.1.8 | ||||||||||||||||||
| extremeEapsFailedTimerThis indicates the EAPS domain's failed timer's value in seconds. | Integer32r/w Constraints: range: 2-300 | .1.3.6.1.4.1.1916.1.18.1.1.9 | ||||||||||||||||||
| extremeEapsFailedTimerExpiryActionThis indicates the action taken by the domain when the fail timer expires. If the action is to sendAlert, then a SNMP trap - extremeEapsFailTimerExpFlagSet - will be sent, and the secondary port will continue to remain… | EapsFailTimerExpiryActionr/w Type Values:
| .1.3.6.1.4.1.1916.1.18.1.1.10 | ||||||||||||||||||
| extremeEapsUnconfigRingPortThis specifies which EAPS domain port is being unconfigured. Value of 1, indicates unconfigure the primary port. Value of 2, indicates unconfigure secondary port. | EapsPortTyper/w Type Values:
| .1.3.6.1.4.1.1916.1.18.1.1.11 | ||||||||||||||||||
| extremeEapsPrimaryStatusThis indicates the status of the EAPS domain's primary ring-port. | EapsDomainPortStatus Type Values:
| .1.3.6.1.4.1.1916.1.18.1.1.12 | ||||||||||||||||||
| extremeEapsSecondaryStatusThis indicates the status of the EAPS domain's secondary ring-port. | EapsDomainPortStatus Type Values:
| .1.3.6.1.4.1.1916.1.18.1.1.13 | ||||||||||||||||||
| extremeEapsProtectedVlansCountThis gives the count of the number of vlans that are being protected by this EAPS domain. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.1916.1.18.1.1.14 | ||||||||||||||||||
| extremeEapsRowStatusThe status of this entry as per standard RowStatus conventions. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.1916.1.18.1.1.15 | ||||||||||||||||||
| extremeEapsHelloTimerMsThis indicates the milliseconds portion of the EAPS domain's hello timer value in milliseconds. | Integer32 Constraints: range: 100-900 | .1.3.6.1.4.1.1916.1.18.1.1.16 | ||||||||||||||||||
| extremeEapsPriorityThis gives the priority of the domain. Used along with spatial re-use to prioritize handling of domains during a topology change. | EapsDomainPriorityr/w Type Values:
| .1.3.6.1.4.1.1916.1.18.1.1.17 |
extremeEapsMbrVlanTable
table.1.3.6.1.4.1.1916.1.18.4
·
1 row entry
·
4 columns
Uses the extreme variant from
Command help
/opt/observium/mibs/extreme.
Walk extremeEapsMbrVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EXTREME-EAPS-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EXTREME-EAPS-MIB::extremeEapsMbrVlanTable'
This table contains the control and all protected vlans added to each EAPS domain on this device. There can be only 1 control vlan, while many protected vlans added to a EAPS domain.
An individual entry of this table correlates a EAPS
domain with a VLAN added to it and its type whether it is
control or protected.
domain with a VLAN added to it and its type whether it is
control or protected.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| extremeEapsMbrVlanNameThe member VLAN's name. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.1916.1.18.4.1.1 | ||||||||||||
| extremeEapsMbrVlanTypeThe member VLAN's type whether it is control or protected. | EapsMbrVlanType Type Values:
| .1.3.6.1.4.1.1916.1.18.4.1.2 | ||||||||||||
| extremeEapsMbrVlanTagThe member VLAN's Vlan Id tag. | Integer32 Constraints: range: 1-4095 | .1.3.6.1.4.1.1916.1.18.4.1.3 | ||||||||||||
| extremeEapsMbrVlanRowStatusThe status of this entry as per standard RowStatus conventions. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.1916.1.18.4.1.4 |