Copyright notice
(c) E-T-A Elektrotechnische Apparate GmbH
2014-2015 Florian Pfanner, Michael Haerteis
This MIB file was created for a RCI10. Via
SNMP the slave states can be retrieved and device actions can initiated.
This notification is sent after a successful power up
systemFailure
.1.3.6.1.4.1.44086.4.1.100.1.1.2
If the system enters failure mode this Trap is sent
fuseNew
.1.3.6.1.4.1.44086.4.1.100.1.10.1
This Trap is sent if a new fuse was found
fuseGone
.1.3.6.1.4.1.44086.4.1.100.1.10.2
at a fuse which responds onto requests in the past does no longer
respond.
fuseWrong
.1.3.6.1.4.1.44086.4.1.100.1.10.3
added fuse has a different nominal current as the fuse in the same
slot had before.
fuseOutputStateChanged
.1.3.6.1.4.1.44086.4.1.100.1.10.4
Informs that the output state of a fuse had changed his status.
fuseFailure
.1.3.6.1.4.1.44086.4.1.100.1.10.5
If any status or error flag changes, this trap is sent.
eaNew
.1.3.6.1.4.1.44086.4.1.100.1.20.1
This Trap is sent if a new external alarm device was found
eaGone
.1.3.6.1.4.1.44086.4.1.100.1.20.2
at a external alarm device, which responded onto requests in the past, does no longer
respond.
eaActiveFunctionWarning
.1.3.6.1.4.1.44086.4.1.100.1.20.3
Informs that a logic- or signalling function is configured for a new plugged or pulled external alarm device.
eaInternalError
.1.3.6.1.4.1.44086.4.1.100.1.20.4
Informs that a internal error of external alarm device occured
eaMasterWasNotAvailable
.1.3.6.1.4.1.44086.4.1.100.1.20.5
Informs (one time) that a external alarm device detected, that the master device was not available for some time.
eaInputChanged
.1.3.6.1.4.1.44086.4.1.100.1.20.6
Informs that a external alarm device input has changed its state; Summary for all inputs of one external alarm device.
eaOutputChanged
.1.3.6.1.4.1.44086.4.1.100.1.20.7
Informs that a external alarm device output has changed its state; Summary for all outputs of one external alarm device.
eaSingleInputChanged
.1.3.6.1.4.1.44086.4.1.100.1.20.8
at a external alarm device input has changed its state; Is sent for every changed input.
If input changed high: 'raise'; If input changed low: 'clear'
eaSingleOutputChanged
.1.3.6.1.4.1.44086.4.1.100.1.20.9
at a external alarm device output has changed its state; Is sent for every changed output.
If output changed high: 'raise'; If output changed low: 'clear'