ES3528MO-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
118
Rows
118
Columns
602
switchInfoTable
table.1.3.6.1.4.1.259.6.10.94.1.1.3
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::switchInfoTable'
Table of descriptive and status information about the switch units in this system.
Table providing descriptions and status information for
switch units.
switch units.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swUnitIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.1 | ||||||
| swHardwareVerHardware version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.2 | ||||||
| swMicrocodeVerMicrocode version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.3 | ||||||
| swLoaderVerLoader version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.4 | ||||||
| swBootRomVerBoot ROM code version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.5 | ||||||
| swOpCodeVerOperation code version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.6 | ||||||
| swPortNumberThe number of ports on this switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.7 | ||||||
| swPowerStatusIndicates the switch using internalPower(1), redundantPower(2) or both(3) | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.1.3.1.8 | ||||||
| swRoleInSystemIndicates the switch is master(1), backupMaster(2) or slave(3) in this system. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.1.3.1.9 | ||||||
| swSerialNumberSerial number of the switch. | OctetString Constraints: range: 0-80 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.10 | ||||||
| swServiceTagService tag serial-number of the switch. | OctetString Constraints: range: 0-80 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.13 | ||||||
| swModelNumberModel number of the switch. | OctetString Constraints: range: 0-15 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.14 | ||||||
| swEpldVerThe EPLD version of the switch. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.6.10.94.1.1.3.1.15 |
switchIndivPowerTable
table.1.3.6.1.4.1.259.6.10.94.1.1.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchIndivPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::switchIndivPowerTable'
Table about the status of individual powers.
Table about the status of individual power.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swIndivPowerUnitIndexThis is defined as swUnitIndex. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.1.6.1.1 | ||||||
| swIndivPowerIndex1 means internal power, 2 means external power. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.1.6.1.2 | ||||||
| swIndivPowerStatusnotPresent(1) means not present, green(2) means up, red(3) means down. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.1.6.1.3 |
portTable
table.1.3.6.1.4.1.259.6.10.94.1.2.1
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::portTable'
Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk.
An entry in the table, describing the configuration of
one switch port or trunk.
one switch port or trunk.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| portIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.1.1.1 | ||||||||||||||||||||||||||||||||
| portNameThe name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.6.10.94.1.2.1.1.2 | ||||||||||||||||||||||||||||||||
| portTypeIndicates the port type of the configuration of the switch. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.3 | ||||||||||||||||||||||||||||||||
| portSpeedDpxCfgConfigures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.4 | ||||||||||||||||||||||||||||||||
| portFlowCtrlCfg(1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.5 | ||||||||||||||||||||||||||||||||
| portCapabilitiesPort or trunk capabilities. | Bitsr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.6 | ||||||||||||||||||||||||||||||||
| portAutonegotiationWhether auto-negotiation is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.7 | ||||||||||||||||||||||||||||||||
| portSpeedDpxStatusThe operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case t… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.8 | ||||||||||||||||||||||||||||||||
| portFlowCtrlStatus(2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently confi… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.9 | ||||||||||||||||||||||||||||||||
| portTrunkIndexThe trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding tru… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.1.1.10 | ||||||||||||||||||||||||||||||||
| portComboForcedModeThis determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.12 | ||||||||||||||||||||||||||||||||
| portMasterSlaveModeCfgConfigures the PHY mode when auto negotiation is disabled and speed-duplex is 1000full for giga copper port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.1.1.15 |
cableDiagResultTable
table.1.3.6.1.4.1.259.6.10.94.1.2.3.2
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk cableDiagResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::cableDiagResultTable'
Table for cable diagnostics result.
Entry for cable diagnostics result.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| cableDiagResultIfIndexThis is defined as the ifIndex. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.1 | ||||||||||||||||||||
| cableDiagResultStatusPairAThe result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.2 | ||||||||||||||||||||
| cableDiagResultStatusPairBThe result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.3 | ||||||||||||||||||||
| cableDiagResultDistancePairADisplays the fault distance of pair A of the cable in meters. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.6 | ||||||||||||||||||||
| cableDiagResultDistancePairBDisplays the fault distance of pair B of the cable in meters. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.7 | ||||||||||||||||||||
| cableDiagResultTimeDisplays the last time of cable diagnostics. For example, 'Jan 1 02:03:04 2002'. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.6.10.94.1.2.3.2.1.11 |
portUtilTable
table.1.3.6.1.4.1.259.6.10.94.1.2.6
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portUtilTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::portUtilTable'
Dispalys port utilization during recent 300 seconds.
Dispalys port utilization during recent 300 seconds.
Indexes
| Column | Syntax | OID |
|---|---|---|
| portUtilIfIndexThe port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.6.1.1 |
| portInOctetRateThe input octet rate (kbits/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.6.10.94.1.2.6.1.2 |
| portInPacketRateThe input packet rate (pkts/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.6.10.94.1.2.6.1.3 |
| portInUtilThe input utilization of the port, in one per hundred. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.6.1.4 |
| portOutOctetRateThe output octet rate (kbits/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.6.10.94.1.2.6.1.5 |
| portOutPacketRateThe output packet rate (pkts/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.6.10.94.1.2.6.1.6 |
| portOutUtilThe output utilization of the port, in one per hundred. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.2.6.1.7 |
trunkTable
table.1.3.6.1.4.1.259.6.10.94.1.3.3
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk trunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::trunkTable'
Table describing the configuration and status of each trunk.
An entry describing the configuration and status of a
particular trunk.
particular trunk.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| trunkIndexIdentifies the trunk within the switch that is described by the table entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.3.3.1.1 | ||||
| trunkPortsThe complete set of ports currently associated with this trunk. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.6.10.94.1.3.3.1.2 | ||||
| trunkCreationA value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.3.3.1.3 | ||||
| trunkStatusWriting this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.3.3.1.4 |
lacpPortTable
table.1.3.6.1.4.1.259.6.10.94.1.4.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk lacpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::lacpPortTable'
Table for LACP port configuration.
Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| lacpPortIndexThe port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.4.1.1.1 | ||||
| lacpPortStatusWhether 802.3ad LACP is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.4.1.1.2 |
staPortTable
table.1.3.6.1.4.1.259.6.10.94.1.5.2
·
1 row entry
·
15 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk staPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::staPortTable'
The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType.
The conceptual entry of staPortTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| staPortFastForwardWhether fast forwarding is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.2 | ||||||
| staPortProtocolMigrationWhen operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.6.10.94.1.5.2.1.3 | ||||||
| staPortOperEdgePortThe operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.6.10.94.1.5.2.1.5 | ||||||
| staPortAdminPointToPointThe administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.6 | ||||||
| staPortOperPointToPointThe operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-de… | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.6.10.94.1.5.2.1.7 | ||||||
| staPortSystemStatusPer-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.9 | ||||||
| staPortLongAdminPathCostThe admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This obje… | Integer32r/w Constraints: range: 0-200000000 | .1.3.6.1.4.1.259.6.10.94.1.5.2.1.10 | ||||||
| staPortLongOperPathCostThe oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This objec… | Integer32 Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.6.10.94.1.5.2.1.11 | ||||||
| staPortRootGuardAdminStatusSpecifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.13 | ||||||
| staPortRootGuardOperStatusThe current operational status of the root guard which provides a way to enforce the root bridge placement in the network. | P-BRIDGE-MIBEnabledStatus Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.14 | ||||||
| staPortBpduGuardA value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.15 | ||||||
| staPortAdminEdgePortWithAutoThe administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) indicates that this port should be assumed as a non-edge-port a… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.17 | ||||||
| staPortBpduFilterThe administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indicates that this port will not avoid trans… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.18 | ||||||
| staPortBpduGuardAutoRecoveryA value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.2.1.19 | ||||||
| staPortBpduGuardAutoRecoveryIntervalThe interval in seconds used by BPDU guard auto recovery mechanism. | Unsigned32r/w Constraints: range: 30-86400 | .1.3.6.1.4.1.259.6.10.94.1.5.2.1.20 |
xstInstanceCfgTable
table.1.3.6.1.4.1.259.6.10.94.1.5.6.4
·
1 row entry
·
16 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk xstInstanceCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::xstInstanceCfgTable'
This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use, the mstInstanceEditIndex is always 0.
A conceptual row containing the property of the RST or MST instance.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| xstInstanceCfgIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.1 | ||||
| xstInstanceCfgPriorityThe priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. | Integer32r/w Constraints: range: 0-61440 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.2 | ||||
| xstInstanceCfgTimeSinceTopologyChangeThe time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.3 | ||||
| xstInstanceCfgTopChangesThe total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.4 | ||||
| xstInstanceCfgDesignatedRootThe bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the root identi… | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.5 | ||||
| xstInstanceCfgRootCostThe cost of the path to the root as seen from this bridge of the RST or MST. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.6 | ||||
| xstInstanceCfgRootPortThe number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.7 | ||||
| xstInstanceCfgMaxAgeThe maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it is discarded, in units of hundredths of a second. This is t… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.8 | ||||
| xstInstanceCfgHelloTimeThe amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.9 | ||||
| xstInstanceCfgHoldTimeThis time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.10 | ||||
| xstInstanceCfgForwardDelayFor RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the por… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.11 | ||||
| xstInstanceCfgBridgeMaxAgeFor RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the val… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.12 | ||||
| xstInstanceCfgBridgeHelloTimeFor RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.13 | ||||
| xstInstanceCfgBridgeForwardDelayFor RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.14 | ||||
| xstInstanceCfgTxHoldCountFor RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.15 | ||||
| xstInstanceCfgPathCostMethodFor RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value o… | StaPathCostMode Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.6.4.1.16 |
xstInstancePortTable
table.1.3.6.1.4.1.259.6.10.94.1.5.6.5
·
1 row entry
·
14 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk xstInstancePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::xstInstancePortTable'
The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration.
The conceptual row for xstInstancePortTable.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| xstInstancePortInstanceThe instance of the MSTP. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.1 | ||||||||||||
| xstInstancePortPortThe port and the trunk (excluding trunk member ports) interface of the mstInstancePortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStp… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.2 | ||||||||||||
| xstInstancePortPriorityDefines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active lin… | Integer32r/w Constraints: range: 0-240 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.3 | ||||||||||||
| xstInstancePortStateThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1): Port receives configuration messages, … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.4 | ||||||||||||
| xstInstancePortEnableThe enabled/disabled status of the port. | P-BRIDGE-MIBEnabledStatus Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.5 | ||||||||||||
| xstInstancePortPathCostThe pathcost of the RST or MST in the range 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher val… | Integer32r/w Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.6 | ||||||||||||
| xstInstancePortDesignatedRootThe unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the port is attached. | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.7 | ||||||||||||
| xstInstancePortDesignatedCostThe path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.8 | ||||||||||||
| xstInstancePortDesignatedBridgeThe bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.9 | ||||||||||||
| xstInstancePortDesignatedPortThe port identifier of the port on the designated bridge for this port's segment. | OctetString Constraints: range: 2-2 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.10 | ||||||||||||
| xstInstancePortForwardTransitionsThe number of times this port has transitioned from the learning state to the forwarding state. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.11 | ||||||||||||
| xstInstancePortPortRoleThe role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the bridge to the root bridge (i.e., root port) (3) The port … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.12 | ||||||||||||
| xstInstancePortAdminPathCostThe admin value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attach… | Integer32r/w Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.13 | ||||||||||||
| xstInstancePortOperPathCostThe oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attache… | Integer32 Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.6.10.94.1.5.6.5.1.14 |
mstInstanceEditTable
table.1.3.6.1.4.1.259.6.10.94.1.5.6.6
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mstInstanceEditTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mstInstanceEditTable'
The Multiple Spanning Tree region instance vlan configuration table. Please read the actual instance vlan mapped in the mstInstanceOperTable.
A conceptual row containing the status of the MSTP instance.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mstInstanceEditIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.1 |
| mstInstanceEditVlansMapA string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.2 |
| mstInstanceEditVlansMap2kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.3 |
| mstInstanceEditVlansMap3kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.4 |
| mstInstanceEditVlansMap4kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.5 |
| mstInstanceEditRemainingHopsThe remaining hop count for this MST instance. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.5.6.6.1.6 |
mstInstanceOperTable
table.1.3.6.1.4.1.259.6.10.94.1.5.6.7
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mstInstanceOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mstInstanceOperTable'
The Multiple Spanning Tree region instance vlan mapped table.
A conceptual row containing the status of the MSTP instance.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mstInstanceOperIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.1 |
| mstInstanceOperVlansMapA string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.2 |
| mstInstanceOperVlansMap2kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.3 |
| mstInstanceOperVlansMap3kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.4 |
| mstInstanceOperVlansMap4kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.5.6.7.1.5 |
.1.3.6.1.4.1.259.6.10.94.1.5.7
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk staLoopbackDetectionPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::staLoopbackDetectionPortTable'
A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk
A conceptual row of staLoopbackDetectionPortTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| staLoopbackDetectionPortIfIndexThe port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.5.7.1.1 | ||||
| staLoopbackDetectionPortStatusStatus of the port on whether spanning tree loopback detection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.7.1.2 | ||||
| staLoopbackDetectionPortTrapStatusThe parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.7.1.3 | ||||
| staLoopbackDetectionPortReleaseModeSetting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicates that this port can be released from discarding state manu… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.7.1.4 | ||||
| staLoopbackDetectionPortReleaseSet this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.5.7.1.5 |
mirrorTable
table.1.3.6.1.4.1.259.6.10.94.1.8.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mirrorTable'
Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be used as either source or destination ports.
The conceptual row of mirrorTable.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| mirrorDestinationPortThe destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.8.1.1.1 | ||||||
| mirrorSourcePortThe source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.8.1.1.2 | ||||||
| mirrorTypeIf this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.8.1.1.3 | ||||||
| mirrorStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.8.1.1.4 |
vlanMirrorTable
table.1.3.6.1.4.1.259.6.10.94.1.8.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::vlanMirrorTable'
Table for VLAN mirroring, enabling a VLAN to be mirrored to a port.
The conceptual row of vlanMirrorTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanMirrorDestinationPortThe destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.8.2.1.1 | ||||
| vlanMirrorSourceVlanThe source VLAN for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.8.2.1.2 | ||||
| vlanMirrorStatusSet this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.8.2.1.4 |
.1.3.6.1.4.1.259.6.10.94.1.9.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopRouterCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopRouterCurrentTable'
Table for current router ports.
Entry for current router ports.
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopRouterCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.8.1.1 |
| igmpSnoopRouterCurrentPortsThe set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.6.10.94.1.9.8.1.2 |
| igmpSnoopRouterCurrentStatusThe set of ports which are static router ports. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.6.10.94.1.9.8.1.3 |
.1.3.6.1.4.1.259.6.10.94.1.9.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopRouterStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopRouterStaticTable'
Table for static router ports.
Entry for static router ports.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopRouterStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.9.1.1 | ||||
| igmpSnoopRouterStaticPortsThe set of ports which are static router ports. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.6.10.94.1.9.9.1.2 | ||||
| igmpSnoopRouterStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.9.1.3 |
.1.3.6.1.4.1.259.6.10.94.1.9.10
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopMulticastCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopMulticastCurrentTable'
Table for current multicast addresses.
Entry for current multicast addresses.
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopMulticastCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.10.1.1 |
| igmpSnoopMulticastCurrentIpAddressIP address of multicast group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.9.10.1.2 |
| igmpSnoopMulticastCurrentPortsThe set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.6.10.94.1.9.10.1.3 |
| igmpSnoopMulticastCurrentStatusThe set of ports which are static members. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.6.10.94.1.9.10.1.4 |
.1.3.6.1.4.1.259.6.10.94.1.9.11
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopMulticastStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopMulticastStaticTable'
Table for static multicast addresses.
Entry for static multicast addresses.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopMulticastStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.11.1.1 | ||||
| igmpSnoopMulticastStaticIpAddressIP address of multicast group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.9.11.1.2 | ||||
| igmpSnoopMulticastStaticPortsThe set of ports which are members. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.6.10.94.1.9.11.1.3 | ||||
| igmpSnoopMulticastStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.11.1.4 |
.1.3.6.1.4.1.259.6.10.94.1.9.14
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopCurrentVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopCurrentVlanTable'
Table for enabling or disabling IGMP snooping per VLAN.
Entry for enabling or disabling IGMP snooping.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopCurrentVlanIndexSame is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.14.1.1 | ||||
| igmpSnoopCurrentVlanImmediateLeaveThe parameter to enable or disable the Immediate-Leave feature on this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.14.1.3 |
igmpSnoopProfileTable
table.1.3.6.1.4.1.259.6.10.94.1.9.18
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopProfileTable'
The table for configuring the IGMP snooping profile.
The entry for configuring the IGMP snooping profile.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopProfileIdThe ID of the IGMP snooping profile. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.18.1.1 | ||||
| igmpSnoopProfileActionThe access mode of the IGMP snooping profile. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.18.1.2 | ||||
| igmpSnoopProfileStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.18.1.3 |
.1.3.6.1.4.1.259.6.10.94.1.9.20
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopProfileRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopProfileRangeTable'
The table for configuring the range of the IGMP snooping profile.
The entry for configuring the range of the IGMP snooping profile.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| igmpSnoopProfileRangeProfileIdThis is defined as igmpSnoopProfileId. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.20.1.1 | ||||||||||||||
| igmpSnoopProfileRangeInetAddressTypeThe address type is associated with this agent. Only ipv4(1) type is supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.20.1.2 | ||||||||||||||
| igmpSnoopProfileRangeStartInetAddressThe specified addresses in the start of the controlled IP multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.6.10.94.1.9.20.1.3 | ||||||||||||||
| igmpSnoopProfileRangeEndInetAddressThe specified addresses in the end of the controlled IP multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.6.10.94.1.9.20.1.4 | ||||||||||||||
| igmpSnoopProfileRangeActionThe access mode of the IGMP snooping profile. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.20.1.5 |
igmpSnoopFilterPortTable
table.1.3.6.1.4.1.259.6.10.94.1.9.21
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopFilterPortTable'
Table for port configuration in IGMP filtering.
Entry for port configuration in IGMP filtering.
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopFilterPortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.21.1.1 |
| igmpSnoopFilterPortProfileIdThe igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.9.21.1.2 |
.1.3.6.1.4.1.259.6.10.94.1.9.22
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopThrottlePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopThrottlePortTable'
Table for port configuration in IGMP throttling.
Entry for port configuration in IGMP throttling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopThrottlePortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.22.1.1 | ||||
| igmpSnoopThrottlePortRunningStatusDescribes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) indicates the IGMP throttling mechanism is inactive. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.6.10.94.1.9.22.1.2 | ||||
| igmpSnoopThrottlePortActionThe action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and the number of current joined multicast groups is equal to th… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.22.1.3 | ||||
| igmpSnoopThrottlePortMaxGroupsThe maximum number of IGMP groups that the interface can join. | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.6.10.94.1.9.22.1.4 | ||||
| igmpSnoopThrottlePortCurrentGroupsThe current number of IGMP groups that the interface has joined. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.9.22.1.5 |
igmpSnoopPortTable
table.1.3.6.1.4.1.259.6.10.94.1.9.27
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopPortTable'
Table of IGMP Snooping service per port.
Entry of IGMP Snooping service per port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopPortIndexThe port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.27.1.1 | ||||
| igmpSnoopQueryDropParameter to enable or disable dropping IGMP Query packet. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.27.1.3 |
igmpSnoopPortVlanTable
table.1.3.6.1.4.1.259.6.10.94.1.9.32
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopPortVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::igmpSnoopPortVlanTable'
Table of IGMP Snooping service per port per VLAN.
Entry of IGMP Snooping service per port.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopPortVlanPortIndexThe port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.32.1.1 | ||||
| igmpSnoopPortVlanVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.9.32.1.2 | ||||
| igmpSnoopPortVlanQueryDropParameter to enable or disable dropping IGMP Query packet. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.9.32.1.3 |
netConfigTable
table.1.3.6.1.4.1.259.6.10.94.1.10.1
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk netConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::netConfigTable'
A table of netConfigEntry.
A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresp…
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresp…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| netConfigIfIndexThe VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.10.1.1.1 | ||||||||||||
| netConfigIPAddressThe IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.10.1.1.2 | ||||||||||||
| netConfigSubnetMaskThe subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure o… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.10.1.1.3 | ||||||||||||
| netConfigPrimaryInterfaceWhether this is a primary interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.10.1.1.4 | ||||||||||||
| netConfigUnnumberedWhether this is an unnumbered interface. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.10.1.1.5 | ||||||||||||
| netConfigStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.10.1.1.6 |
dhcpcInterfaceTable
table.1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpcInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dhcpcInterfaceTable'
Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN), or may have many entries(e.g. for all ports, or for all static VLANs).
Entry for DHCP client information listed by interface.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| dhcpcIfIndexThis is defined by ifIndex in the IF-MIB.(static vlan if index) | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1.1.1 | ||||||
| dhcpcIfClientIdModeWhether the Client ID is in text mode or in Hex mode. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1.1.2 | ||||||
| dhcpcIfClientIdThe value that the DHCP client sets in the client_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to uniquely identify the client. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.259.6.10.94.1.10.11.1.1.1.1.3 |
.1.3.6.1.4.1.259.6.10.94.1.10.11.4.6
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpOption82RelayServerAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dhcpOption82RelayServerAddrTable'
This table is to specify relay server IP address, the maximum number of server IP addresses user can specify is 5.
A conceptual row of dhcpOption82RelayServerAddrTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| dhcpOption82RelayServerAddrIndexThe index of the relay server IP address. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.6.10.94.1.10.11.4.6.1.1 |
| dhcpOption82RelayServerAddrServerIpThe IP address of the relay server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.10.11.4.6.1.2 |
vlanTable
table.1.3.6.1.4.1.259.6.10.94.1.12.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::vlanTable'
Table for VLAN configuration.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| vlanIndexBased on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.12.1.1.1 | ||||||
| vlanAddressMethodMethod to get the IP address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.1.1.2 |
vlanPortTable
table.1.3.6.1.4.1.259.6.10.94.1.12.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::vlanPortTable'
Table for port configuration in VLAN.
Entry for port configuration in VLAN.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| vlanPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDG… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.12.2.1.1 | ||||||||
| vlanPortModeThis variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.2.1.2 | ||||||||
| vlanPortPrivateVlanTypeThe port type defined for private VLAN. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.2.1.3 |
protocolVlanTable
table.1.3.6.1.4.1.259.6.10.94.1.12.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk protocolVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::protocolVlanTable'
The configuration table which contains the binding entry of the protocol-group and VLANs.
The binding entry of the protocol-group and VLANs.
Indexes
| Column | Syntax | OID |
|---|---|---|
| protocolVlanGroupIdThe specified protocol group of a binding entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.12.5.1.1 |
| protocolVlanGroupVidThe vlan index of the binding entry. The vid zero is used to delete the binding entry. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.12.5.1.2 |
voiceVlanOuiTable
table.1.3.6.1.4.1.259.6.10.94.1.12.6.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk voiceVlanOuiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::voiceVlanOuiTable'
A table containing the mac address which can be identified by voice vlan.
A table containing the mac address which can be identified
by voice vlan.
by voice vlan.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| voiceVlanOuiAddressMAC address can be identified by voice vlan. | .1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.1 | |||||
| voiceVlanOuiMaskThe mask of MAC address. | r/w | .1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.2 | ||||
| voiceVlanOuiDescriptionThe description of oui. | OctetStringr/w Constraints: range: 0-30 | .1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.3 | ||||
| voiceVlanOuiStatusCurrent operation status of the row. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.6.1.1.4 |
voiceVlanPortTable
table.1.3.6.1.4.1.259.6.10.94.1.12.6.7
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk voiceVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::voiceVlanPortTable'
A list of voice vlan mode entries.
An entry containing voice vlan mode information,
which is applicable to a voice vlan enabled interface.
which is applicable to a voice vlan enabled interface.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| voiceVlanPortIfIndexThe index of interface on which voice vlan function is enabled. | Integer32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.1 | ||||||
| voiceVlanPortModeVoice vlan configuration mode status. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.2 | ||||||
| voiceVlanPortSecurityIf the security is enabled, the port is only allow voice traffuc for the voice vlan. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.3 | ||||||
| voiceVlanPortPriorityThe priority of the voice vlan traffic in the port. | Integer32r/w Constraints: range: 0-6 | .1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.4 | ||||||
| voiceVlanPortRuleOuiThe address of voice device is learned from Oui table. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.5 | ||||||
| voiceVlanPortRuleLldpThe address of voice device is learned from LLDP discovery. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.6.7.1.6 |
vlanDot1qTunnelPortTable
table.1.3.6.1.4.1.259.6.10.94.1.12.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanDot1qTunnelPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::vlanDot1qTunnelPortTable'
Table for port configuration in 802.1Q Tunneling.
Entry for port configuration in 802.1Q Tunneling.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| vlanDot1qTunnelPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.12.8.1.1 | ||||||
| vlanDot1qTunnelPortModeThis variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to dot1qTunnel(2) sets as dot1q-tunnel mode port which link to customer. Setting it to dot1qTunnelUplink(3) … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.8.1.2 | ||||||
| vlanDot1qTunnelPortEtherTypeTPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. | Unsigned32r/w Constraints: range: 2048-65535 | .1.3.6.1.4.1.259.6.10.94.1.12.8.1.3 |
macVlanTable
table.1.3.6.1.4.1.259.6.10.94.1.12.11
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk macVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::macVlanTable'
A table that contains the settings for MAC-based VLAN.
A conceptual row in the macVlanTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| macVlanMacAddressThe MAC address that may specify an entry in the table which contains MAC-based VLAN information. | .1.3.6.1.4.1.259.6.10.94.1.12.11.1.1 | |||||
| macVlanIdSpecifies the VLAN ID which the MAC address associates with. | Integer32r/w Constraints: range: 1-4092 | .1.3.6.1.4.1.259.6.10.94.1.12.11.1.2 | ||||
| macVlanStatusSet this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.11.1.4 | ||||
| macVlanMacMaskThe MAC address mask that may specify an entry in the table which contains MAC-based VLAN information. | .1.3.6.1.4.1.259.6.10.94.1.12.11.1.5 |
subnetVlanTable
table.1.3.6.1.4.1.259.6.10.94.1.12.13
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk subnetVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::subnetVlanTable'
A table that contains the settings for IP subnet-based VLAN.
A conceptual row in the subnetVlanTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| subnetVlanIpAddressThe IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnet… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.12.13.1.1 | ||||
| subnetVlanMaskThe netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanI… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.12.13.1.2 | ||||
| subnetVlanIdSpecifies the VLAN ID which the subnet associates with. | Integer32r/w Constraints: range: 1-4094 | .1.3.6.1.4.1.259.6.10.94.1.12.13.1.3 | ||||
| subnetVlanPrioritySpecifies the priority whcich the subnet associates with. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.6.10.94.1.12.13.1.4 | ||||
| subnetVlanStatusSet this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.13.1.5 |
.1.3.6.1.4.1.259.6.10.94.1.12.16
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanL2ProtocolTunnelPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::vlanL2ProtocolTunnelPortTable'
Table for port configuration in Layer 2 Protocol Tunneling.
Entry for port configuration in Layer 2 Protocol
Tunneling.
Tunneling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanL2ptPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.12.16.1.1 | ||||
| vlanL2ptPortStaSet enabled(1) to enable Layer 2 protocol tunneling for spanning-tree protocol. Set disabled(2) to disable Layer 2 protocol tunneling for spanning-tree protocol. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.16.1.2 | ||||
| vlanL2ptPortLldpSet enabled(1) to enable Layer 2 protocol tunneling for LLDP. Set disabled(2) to disable Layer 2 protocol tunneling for LLDP. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.16.1.3 | ||||
| vlanL2ptPortCdpSet enabled(1) to enable Layer 2 protocol tunneling for Cisco Discovery Protocol. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco Discovery Protocol. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.16.1.4 | ||||
| vlanL2ptPortVtpSet enabled(1) to enable Layer 2 protocol tunneling for Cisco VTP. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco VTP. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.16.1.5 | ||||
| vlanL2ptPortPvstSet enabled(1) to enable Layer 2 protocol tunneling for Cisco PVST+. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco PVST+. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.12.16.1.6 |
prioIpDscpTable
table.1.3.6.1.4.1.259.6.10.94.1.13.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioIpDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::prioIpDscpTable'
Table for IP DSCP priority mapping.
Entry for IP DSCP priority mapping.
Indexes
| Column | Syntax | OID |
|---|---|---|
| prioIpDscpPortThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.13.4.1.1 |
| prioIpDscpValueValue of IP DSCP as specified in the packet header. | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.259.6.10.94.1.13.4.1.2 |
| prioIpDscpCosClass of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardwar… | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.6.10.94.1.13.4.1.3 |
prioWrrTable
table.1.3.6.1.4.1.259.6.10.94.1.13.9
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioWrrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::prioWrrTable'
Table for weighted round robin (WRR).
Entry for weighted round robin (WRR).
Indexes
| Column | Syntax | OID |
|---|---|---|
| prioWrrTrafficClassTraffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.6.10.94.1.13.9.1.1 |
| prioWrrWeightWeight for this entry. | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.6.10.94.1.13.9.1.2 |
trapDestTable
table.1.3.6.1.4.1.259.6.10.94.1.14.1
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk trapDestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::trapDestTable'
A list of trap destination entries.
A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.
the community string, and SNMP version to use when sending
a trap.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| trapDestAddressThe address to send traps. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.14.1.1.1 | ||||
| trapDestCommunityA community to which this destination address belongs. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.259.6.10.94.1.14.1.1.2 | ||||
| trapDestStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.14.1.1.3 | ||||
| trapDestVersionDetermines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SNMP version 2 trap is sent. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.14.1.1.4 | ||||
| trapDestUdpPortDetermines the UDP port number that the trap will be sent to. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.14.1.1.5 |
rateLimitPortTable
table.1.3.6.1.4.1.259.6.10.94.1.16.1.2
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk rateLimitPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::rateLimitPortTable'
Table for rate limit of each port.
Entry for rate limit of each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| rlPortIndexThe port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.1 | ||||
| rlPortInputStatusWhether input rate limit is enabled for this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.6 | ||||
| rlPortOutputStatusWhether output rate limit is enabled for this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.7 | ||||
| rlPortInputLimitInKiloValue of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.10 | ||||
| rlPortOutputLimitInKiloValue of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.1.2.1.11 |
diffServPortTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.9
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServPortTable'
Table for differentiated services on each port.
Entry for differentiated services on each port.
Indexes
| Column | Syntax | OID |
|---|---|---|
| diffServPortIfIndexThis object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.1 |
| diffServPortPolicyMapIndexSpecifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyMapInd… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.2 |
| diffServPortIngressIpAclIndexSpecifies the ingress IP ACL binding to the interface. The ingress IP ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.3 |
| diffServPortIngressMacAclIndexSpecifies the ingress MAC ACL binding to the interface. The ingress MAC ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.4 |
| diffServPortIngressIpv6AclIndexSpecifies the ingress IPv6 ACL binding to the interface. The ingress IPv6 ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclInd… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.9.1.5 |
diffServPolicyMapTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.10
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServPolicyMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServPolicyMapTable'
Table for policy map.
Entry for policy map.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServPolicyMapIndexAn index that uniquely identifies an entry in this table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.1 | ||||||||||||
| diffServPolicyMapNameThe name of this entry. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.2 | ||||||||||||
| diffServPolicyMapDescriptionThe description of this entry. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.3 | ||||||||||||
| diffServPolicyMapElementIndexListThe octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indicates the diffServPolicyMapEntrys which belong to this entry. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.4 | ||||||||||||
| diffServPolicyMapStatusThis object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'active', which indi… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.10.1.5 |
.1.3.6.1.4.1.259.6.10.94.1.16.4.12
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServPolicyMapElementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServPolicyMapElementTable'
Table for policy map element.
Entry for policy map element.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServPolicyMapElementIndexAn index that uniquely identifies an entry in this table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.1 | ||||||||||||
| diffServPolicyMapElementClassMapIndexSpecifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.2 | ||||||||||||
| diffServPolicyMapElementMeterIndexSpecifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identified by the same value of diffServMeterIndex. If this value is … | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.3 | ||||||||||||
| diffServPolicyMapElementActionIndexSpecifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identified by the same value of diffServActionIndex. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.4 | ||||||||||||
| diffServPolicyMapElementStatusThis object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'acti… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.12.1.5 |
diffServClassMapTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.13
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServClassMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServClassMapTable'
Table for class map.
Entry for class map.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServClassMapIndexAn index that uniquely identifies an entry in this table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.1 | ||||||||||||
| diffServClassMapNameThe name of this entry. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.2 | ||||||||||||
| diffServClassMapDescriptionThe description of this entry. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.3 | ||||||||||||
| diffServClassMapMatchTypeThe map match type of this entry. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.4 | ||||||||||||
| diffServClassMapElementIndexTypeListThe octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element index in network order and it maps the index of differServCla… | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.5 | ||||||||||||
| diffServClassMapElementIndexListThe octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the particular class map elements which belong to this table. The … | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.6 | ||||||||||||
| diffServClassMapStatusThis object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active'… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.13.1.7 |
diffServAclTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.15
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServAclTable'
Table for ACL.
Entry for ACL.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServAclIndexAn index that uniquely identifies an entry in the ACL table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.1 | ||||||||||||
| diffServAclNameThe name of this entry. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.2 | ||||||||||||
| diffServAclTypeThe type of this entry. When the value of ACL type is modified, then the ACEs in the diffServAclAceIndexList of this entry will be auto-removed, and this entry will be auto- unbound from the diffServPortTable and the di… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.3 | ||||||||||||
| diffServAclAceIndexListThe octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs which belong to this table. The ACE uses type to indicate th… | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.4 | ||||||||||||
| diffServAclStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: - 'active', which indicates that the conceptual row is availa… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.15.1.5 |
diffServIpAceTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.17
·
1 row entry
·
20 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServIpAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServIpAceTable'
Table for IP ACE.
Entry for IP ACE.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServIpAceIndexAn index that uniquely identifies an entry in the IP ACE table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.1 | ||||||||||||
| diffServIpAceTypeThe specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.2 | ||||||||||||
| diffServIpAceAccessIndicates the action to be taken if a packet matches this ACE. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.3 | ||||||||||||
| diffServIpAceSourceIpAddrThe specified source IP address. The packet's source address is AND-ed with the value of IpAceSourceIpAddrBitmask and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.4 | ||||||||||||
| diffServIpAceSourceIpAddrBitmaskThe specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.5 | ||||||||||||
| diffServIpAceDestIpAddrThe specified destination IP address. The packet's destination address is AND-ed with the value of diffServIpAceDestIpAddrBitmask and then compared against the value of this object. This object may not be modified if th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.6 | ||||||||||||
| diffServIpAceDestIpAddrBitmaskThe specified destination IP address mask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.7 | ||||||||||||
| diffServIpAceProtocolThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'any'. For example: 0 is IP, 1 is ICMP, 2 is IGM… | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.8 | ||||||||||||
| diffServIpAcePrecSpecifies the IP precedence value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 8. This object may not be modified if the associated diffServIpAceType object is … | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.9 | ||||||||||||
| diffServIpAceTosSpecifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 9. This object may not be modified if the associated diffServIpAceType object i… | Integer32r/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.10 | ||||||||||||
| diffServIpAceDscpSpecifies the DSCP value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 64. This object may not be modified if the associated diffServIpAceType object is equal to… | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.11 | ||||||||||||
| diffServIpAceSourcePortOpIndicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number. equal(2), which is used the diffSe… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.12 | ||||||||||||
| diffServIpAceMinSourcePortIf the diffServIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.13 | ||||||||||||
| diffServIpAceSourcePortBitmaskIf the diffServIpAceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpAceMinSourcePort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.15 | ||||||||||||
| diffServIpAceDestPortOpIndicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. equal(2), which is … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.16 | ||||||||||||
| diffServIpAceMinDestPortIf the diffServIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.17 | ||||||||||||
| diffServIpAceDestPortBitmaskIf the diffServIpAceDestPortOp is equal(2), this indicates the bitmask of the diffServIpAceMinDestPort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.19 | ||||||||||||
| diffServIpAceControlCodeIndicates how the control flags of TCP packets are to be compared. diffServIpAceControlCode is AND-ed with diffServIpAceControlCodeBitmask. This object may not be modified if the associated diffServIpAceType object is e… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.20 | ||||||||||||
| diffServIpAceControlCodeBitmaskIndicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32. This object may not… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.21 | ||||||||||||
| diffServIpAceStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.17.1.22 |
diffServMacAceTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.18
·
1 row entry
·
17 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServMacAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServMacAceTable'
Table for MAC ACE.
Entry for MAC ACE.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServMacAceIndexAn index that uniquely identifies an entry in the MAC ACE table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.1 | ||||||||||||
| diffServMacAceAccessIndicates the action to be taken if a packet matches this ACE. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.2 | ||||||||||||
| diffServMacAcePktformatUsed to check the packet format of the packets. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.3 | ||||||||||||
| diffServMacAceSourceMacAddrIndicates the 48-bit source MAC address. The specified source MAC of the packet. The packet's source MAC address is AND-ed with the value of diffServMacAceSourceMacAddrBitmask and then compared against the value of this… | r/w | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.4 | ||||||||||||
| diffServMacAceSourceMacAddrBitmaskThe specified source MAC address mask. | r/w | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.5 | ||||||||||||
| diffServMacAceDestMacAddrIndicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of diffServMacAceDestMacAddrBitmask and then compared against the … | r/w | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.6 | ||||||||||||
| diffServMacAceDestMacAddrBitmaskThe specified destination MAC address mask. | r/w | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.7 | ||||||||||||
| diffServMacAceVidOpIndicates how a packet's VID is to be compared. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.8 | ||||||||||||
| diffServMacAceMinVidIndicates the lower bound of the VID value range if the diffServMacAceVidOp is range(3). | Integer32r/w Constraints: range: 1-4094 | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.9 | ||||||||||||
| diffServMacAceVidBitmaskThe bit mask of the VID. The default value is 0. | Integer32r/w Constraints: range: 0-4095 | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.10 | ||||||||||||
| diffServMacAceEtherTypeOpIndicates how a packet's ether type is to be compared. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.12 | ||||||||||||
| diffServMacAceEtherTypeBitmaskThe bit mask of Ether type. The default value is 0. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.13 | ||||||||||||
| diffServMacAceMinEtherTypeIndicates the lower bound of the ether type value range if the diffServMacAceEtherTypeOp is range(3). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.14 | ||||||||||||
| diffServMacAceStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.16 | ||||||||||||
| diffServMacAceCosOpIndicates how a packet's CoS is compared. If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing, and diffServMacAceCosBitmask is used as the bitmask of the CoS… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.17 | ||||||||||||
| diffServMacAceCosBitmaskIndicates the bitmask of the CoS value if the object type of diffServMacAceCosOp is equal(2). The default value is 0. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.18 | ||||||||||||
| diffServMacAceMinCosIf the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing. If the object type of diffServMacAceCosOp is range(3), diffServMacAceMinCos indicates the lower bound of… | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.6.10.94.1.16.4.18.1.19 |
diffServActionTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.19
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServActionTable'
Table for action.
Entry for action.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServActionIndexAn index that uniquely identifies an entry in the action table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.1 | ||||||||||||
| diffServActionListThe bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same time on the entry. The actionRedPktNewDscp and actionRedDrop … | Bitsr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.2 | ||||||||||||
| diffServActionPktNewPriSpecifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object can not be set. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.3 | ||||||||||||
| diffServActionPktNewDscpSpecifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.5 | ||||||||||||
| diffServActionRedPktNewDscpSpecifies the new DSCP value for the red marking packet when the action is satisfied. If the actionRedPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.6 | ||||||||||||
| diffServActionRedDropThe actionRedDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. | P-BRIDGE-MIBEnabledStatus Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.7 | ||||||||||||
| diffServActionStatusThis object is used to create a new row, modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', whi… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.19.1.8 |
diffServMeterTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.20
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServMeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServMeterTable'
Table for meter.
Entry for meter.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServMeterIndexAn entry that describes a single set of token bucket parameters. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.1 | ||||||||||||
| diffServMeterModelThe Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.2 | ||||||||||||
| diffServMeterRateThe token-bucket rate, in kilobits per second (kbps). | Integer32r/w Constraints: range: 1-1000000 | .1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.3 | ||||||||||||
| diffServMeterBurstSizeThe maximum number of bytes in a single transmission burst. | Integer32r/w Constraints: range: 64-524288 | .1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.4 | ||||||||||||
| diffServMeterIntervalThe time interval used with the token bucket. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.5 | ||||||||||||
| diffServMeterStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.20.1.6 |
diffServIpv6AceTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.21
·
1 row entry
·
9 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServIpv6AceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServIpv6AceTable'
Table for IPv6 ACE.
Entry fo IPv6 ACE.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServIpv6AceIndexAn index that uniquely identifies an entry in the IPv6 table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.1 | ||||||||||||
| diffServIpv6AceTypeThe specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.2 | ||||||||||||
| diffServIpv6AceAccessIndicates the action to be taken if a packet matches this ACE. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.3 | ||||||||||||
| diffServIpv6AceSourceIpAddrSpecifies the source IPv6 address. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.4 | ||||||||||||
| diffServIpv6AceSourceIpAddrPrefixLenThe length (in bits) associated with the source IPv6 address prefix of this entry. | Integer32r/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.5 | ||||||||||||
| diffServIpv6AceDestIpAddrSpecifies the destination IPv6 address. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.6 | ||||||||||||
| diffServIpv6AceDestIpAddrPrefixLenThe length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.7 | ||||||||||||
| diffServIpv6AceDscpSpecifies the DSCP value to match against. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.9 | ||||||||||||
| diffServIpv6AceStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.21.1.11 |
diffServArpAceTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.23
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServArpAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServArpAceTable'
The conceptual table of all of diffServArpAceEntry.
The conceptual row for diffServArpAceTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServArpAceIndexThe unique index of an ACE within an ACL. | Integer32 Constraints: range: 1-32 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.1 | ||||||||||||
| diffServArpAceActionIndicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, diffServArpAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.2 | ||||||||||||
| diffServArpAcePktTypeIndicates the packet type to be taken if a packet matches this ACE. This object can not be configured when the status of the entry, diffServArpAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.3 | ||||||||||||
| diffServArpAceSourceIpAddrThe specified source ARP address. The packet's source address is AND'ed with the value of diffServArpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be configured when the s… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.4 | ||||||||||||
| diffServArpAceSourceIpAddrBitmaskThe specified source ARP address mask. The packet's destination address is AND'ed with the value of diffServArpAceSourceIpAddr and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.5 | ||||||||||||
| diffServArpAceDestIpAddrThe specified destination IP address. The packet's destination address is AND'ed with the value of diffServArpAceDestIpAddrBitmask and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.6 | ||||||||||||
| diffServArpAceDestIpAddrBitmaskThe specified destination IP address mask. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.7 | ||||||||||||
| diffServArpAceSourceMacAddrIndicates the 48-bit destination MAC address. The specified source MAC of the packet. The packet's source MAC address is AND'ed with the value of aceArpSourceMacAddrBitmask and then compared against the value of this ob… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.8 | ||||||||||||
| diffServArpAceSourceMacAddrBitmaskThe specified source MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.9 | ||||||||||||
| diffServArpAceDestMacAddrIndicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND'ed with the value of aceArpDestMacAddrBitmask and then compared against the value of… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.10 | ||||||||||||
| diffServArpAceDestMacAddrBitmaskThe specified destination MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.11 | ||||||||||||
| diffServArpAceLogStatusIndicates whether to log messages against the packets. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.12 | ||||||||||||
| diffServArpAceStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.16.4.23.1.13 |
diffServArpTable
table.1.3.6.1.4.1.259.6.10.94.1.16.4.24
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::diffServArpTable'
The conceptual table of all of diffServArpEntry.
The conceptual row for diffServArpTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| diffServArpAclNameThe name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.6.10.94.1.16.4.24.1.1 |
privateVlanVlanTable
table.1.3.6.1.4.1.259.6.10.94.1.17.1.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::privateVlanVlanTable'
A table containing private VLAN information on the VLANs which currently exist.
A conceptual row containing the private VLAN
information on the VLANs for a particular management
domain.
information on the VLANs for a particular management
domain.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| privateVlanVlanIndexThe VLAN ID of this private VLAN. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.259.6.10.94.1.17.1.4.1.1 | ||||||||
| privateVlanVlanTypeThe VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already exists, set others to modifiy it. Note that a VLAN's private V… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.1.4.1.2 | ||||||||
| privateVlanAssoicatedPrimaryVlanThe VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanVlanType has the value of primary(2), then this object has th… | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.17.1.4.1.3 |
.1.3.6.1.4.1.259.6.10.94.1.17.1.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanPrivatePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::privateVlanPrivatePortTable'
A table containing information on the configuration of secondary VLANs on the device ports.
A conceptual row containing information of the
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feat…
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feat…
Indexes
| Column | Syntax | OID |
|---|---|---|
| privateVlanPrivatePortIfIndexThis is defined as the ifIndex. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.1.5.1.1 |
| privateVlanPrivatePortSecondaryVlanThe VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress traffic of its associated primary VLAN, but blocks the egre… | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.17.1.5.1.2 |
privateVlanPromPortTable
table.1.3.6.1.4.1.259.6.10.94.1.17.1.6
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanPromPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::privateVlanPromPortTable'
A table containing secondary VLAN to primary VLAN remapping information on ports of the device.
A conceptual row containing secondary VLAN to primary
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
privat…
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
privat…
Indexes
| Column | Syntax | OID |
|---|---|---|
| privateVlanPromPortIfIndexThis is defined as ifIndex. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.1 |
| privateVlanPromPortPrimaryVlanIdThe primary VLAN ID of the promiscous port. | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.2 |
| privateVlanPromPortSecondaryRemapA string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 through 7; the second octet to VLANs 8 through 15; etc. The mos… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.3 |
| privateVlanPromPortSecondaryRemap2kA string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 t… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.4 |
| privateVlanPromPortSecondaryRemap3kA string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 t… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.5 |
| privateVlanPromPortSecondaryRemap4kA string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 3072 t… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.6.10.94.1.17.1.6.1.6 |
privateVlanSessionTable
table.1.3.6.1.4.1.259.6.10.94.1.17.1.8
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::privateVlanSessionTable'
Contains the settings for private VLAN Session.
A conceptual row in the privateVlanSession table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| privateVlanSessionIdThe session ID that may specifiy certain entry in the table which contains private VLAN session information. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.1 | ||||
| privateVlanSessionUplinkPortsThis is the list of uplink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortDownlink of the same session, and they also should not overlap with the privateVlanSessionPortUplink… | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.2 | ||||
| privateVlanSessionDownlinkPortsThis is the list of downlink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortUplink of the same session, and they also should not overlap with the privateVlanSessionPortUplink… | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.3 | ||||
| privateVlanSessionStatusSet this to valid(1) to create an entry. Sets this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.1.8.1.4 |
portSecPortTable
table.1.3.6.1.4.1.259.6.10.94.1.17.2.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portSecPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::portSecPortTable'
The port security(MAC binding) Table.
The entry of portSecPortTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| portSecPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.1 | ||||||||
| portSecPortStatusSet enabled(1) to enable port security and set disabled(2) to disable port security. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.2 | ||||||||
| portSecActionThe corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will be s… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.3 | ||||||||
| portSecMaxMacCountThe maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the num… | Integer32r/w Constraints: range: 0-1024 | .1.3.6.1.4.1.259.6.10.94.1.17.2.1.1.4 |
radiusServerTable
table.1.3.6.1.4.1.259.6.10.94.1.17.4.7
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk radiusServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::radiusServerTable'
The table for RADIUS server.
The conceptual row for radiusServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| radiusServerIndexThe RADIUS server index in the table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.1 | ||||
| radiusServerAddressIP address of a RADIUS server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.2 | ||||
| radiusServerAuthPortNumberAuthentication port number of RADIUS server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.3 | ||||
| radiusServerAcctPortNumberAccounting port number of RADIUS server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.4 | ||||
| radiusServerKeyKey for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. | OctetStringr/w Constraints: range: 0-48 | .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.5 | ||||
| radiusServerRetransmitTimeout for RADIUS. | Integer32r/w Constraints: range: 1-30 | .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.6 | ||||
| radiusServerTimeoutTimeout for RADIUS. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.7 | ||||
| radiusServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.4.7.1.8 |
tacacsPlusServerTable
table.1.3.6.1.4.1.259.6.10.94.1.17.5.4
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk tacacsPlusServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::tacacsPlusServerTable'
The table for TACACS+ server.
The conceptual row for tacacsPlusServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| tacacsPlusServerIndexTACACS+ server index. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.1 | ||||
| tacacsPlusServerAddressIP address of a TACACS+ server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.2 | ||||
| tacacsPlusServerPortNumberTCP port number of a TACACS+ server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.3 | ||||
| tacacsPlusServerKeyThe encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string. | OctetStringr/w Constraints: range: 0-48 | .1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.4 | ||||
| tacacsPlusServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.8 | ||||
| tacacsPlusServerRetransmitThe maximum number of retransmissions for TACACS+. | Integer32r/w Constraints: range: 1-30 | .1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.9 | ||||
| tacacsPlusServerTimeoutTimeout for TACACS+. | secondsInteger32r/w Constraints: range: 1-540 | .1.3.6.1.4.1.259.6.10.94.1.17.5.4.1.10 |
sshConnInfoTable
table.1.3.6.1.4.1.259.6.10.94.1.17.6.6
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sshConnInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::sshConnInfoTable'
The table for Secure Shell Connection.
The conceptual row for sshConnInfoTable.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| sshConnIDThe connection ID of the Secure Shell Connection. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.1 | ||||||
| sshConnMajorVersionThe SSH major version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.2 | ||||||
| sshConnMinorVersionThe SSH minor version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.3 | ||||||
| sshConnStatusThe SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start Sta… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.5 | ||||||
| sshConnUserNameThe user name of the connection. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.6 | ||||||
| sshDisconnectSet the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.7 | ||||||
| sshConnEncryptionTypeStrThe encryption type of the SSH. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.259.6.10.94.1.17.6.6.1.8 |
sshUserTable
table.1.3.6.1.4.1.259.6.10.94.1.17.6.29
·
1 row entry
·
18 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sshUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::sshUserTable'
The conceptual table of all of sshUserEntry.
The conceptual row for sshUserTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| sshUserNameUser Name. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.1 | ||||||||
| sshUserRsaKey1The RSA user key segment 1. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.2 | ||||||||
| sshUserRsaKey2The RSA user key segment 2. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.3 | ||||||||
| sshUserRsaKey3The RSA user key segment 3. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.4 | ||||||||
| sshUserRsaKey4The RSA user key segment 4. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.5 | ||||||||
| sshUserRsaKey5The RSA user key segment 5. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.6 | ||||||||
| sshUserRsaKey6The RSA user key segment 6. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.7 | ||||||||
| sshUserRsaKey7The RSA user key segment 7. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.8 | ||||||||
| sshUserRsaKey8The RSA user key segment 8. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.9 | ||||||||
| sshUserDsaKey1The DSA user key segment 1. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.10 | ||||||||
| sshUserDsaKey2The DSA user key segment 2. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.11 | ||||||||
| sshUserDsaKey3The DSA user key segment 3. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.12 | ||||||||
| sshUserDsaKey4The DSA user key segment 4. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.13 | ||||||||
| sshUserDsaKey5The DSA user key segment 5. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.14 | ||||||||
| sshUserDsaKey6The DSA user key segment 6. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.15 | ||||||||
| sshUserDsaKey7The DSA user key segment 7. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.16 | ||||||||
| sshUserDsaKey8The DSA user key segment 8. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.17 | ||||||||
| sshUserKeyDelActionTo delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA and DSA user key. … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.6.29.1.18 |
ipFilterSnmpTable
table.1.3.6.1.4.1.259.6.10.94.1.17.9.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterSnmpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::ipFilterSnmpTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through SNMP.
will allow to connect to this device through SNMP.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ipFilterSnmpStartAddressThe start IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.9.1.1.1 | ||||
| ipFilterSnmpEndAddressThe end IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.9.1.1.2 | ||||
| ipFilterSnmpStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.9.1.1.3 |
ipFilterHTTPTable
table.1.3.6.1.4.1.259.6.10.94.1.17.9.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterHTTPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::ipFilterHTTPTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through SNMP.
will allow to connect to this device through SNMP.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ipFilterHTTPStartAddressThe start IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.9.2.1.1 | ||||
| ipFilterHTTPEndAddressThe end IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.9.2.1.2 | ||||
| ipFilterHTTPStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.9.2.1.3 |
ipFilterTelnetTable
table.1.3.6.1.4.1.259.6.10.94.1.17.9.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterTelnetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::ipFilterTelnetTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.
will allow them to connect to this device through SNMP.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ipFilterTelnetStartAddressThe start IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.9.3.1.1 | ||||
| ipFilterTelnetEndAddressThe end IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.17.9.3.1.2 | ||||
| ipFilterTelnetStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.9.3.1.3 |
dot1xAuthConfigExtTable
table.1.3.6.1.4.1.259.6.10.94.1.17.11.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dot1xAuthConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dot1xAuthConfigExtTable'
The extension table of dot1xAuthConfigTable.
The entry of dot1xAuthConfigExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| dot1xAuthConfigExtOperModeThe operation mode of dot1x port which allows host connection to 802.1x-authorized ports. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.11.1.1.1 | ||||||
| dot1xAuthConfigExtMultiHostMaxCntThe maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. | Integer32r/w Constraints: range: 1-1024 | .1.3.6.1.4.1.259.6.10.94.1.17.11.1.1.2 | ||||||
| dot1xAuthConfigExtPortIntrusionActionResponses to intrusion when the authentication is failed; block-traffic(1) means that to block traffic when the authentication is failed and guest-vlan(2) means that to join to a guest VLAN when the authentication is fa… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.11.1.1.3 |
dot1xSuppConfigPortTable
table.1.3.6.1.4.1.259.6.10.94.1.17.11.2.3
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dot1xSuppConfigPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dot1xSuppConfigPortTable'
The table of supplicant for port.
The entry of dot1xSuppConfigPortTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dot1xSuppConfigPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.11.2.3.1.1 | ||||
| dot1xSuppConfigPortStatusSet enabled(1) to let the port act as a supplicant and will not respond to messages that are meant for an authenticator. Set disabled(2) to disable supplicant ability of the port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.11.2.3.1.2 |
aaaMethodTable
table.1.3.6.1.4.1.259.6.10.94.1.17.12.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaMethodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::aaaMethodTable'
Contains the settings needed for accounting.
A conceptual row in the aaaMethodTable.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| aaaMethodIndexSpecifies the index for the entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.1 | ||||||
| aaaMethodNameName for the method. | OctetStringr/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.2 | ||||||
| aaaMethodGroupNameName for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. | OctetStringr/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.3 | ||||||
| aaaMethodModestart-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting record is sent in the background. The requested user process b… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.4 | ||||||
| aaaMethodStatusSet to 1 to initiate the aaaMethodTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.5 | ||||||
| aaaMethodClientTypedot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console; commands(3): Provides accounting service for command privileges. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.6 | ||||||
| aaaMethodPrivilegeLevelSpecifies the privilege level for the entry. When aaaMethodClientType is in the mode of command(3), the privilege level is enabled to be accessed. | Integer32r/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.6.10.94.1.17.12.1.1.7 |
aaaRadiusGroupTable
table.1.3.6.1.4.1.259.6.10.94.1.17.12.2
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaRadiusGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::aaaRadiusGroupTable'
Uses a subset of RADIUS servers for accounting as defined by the server group
A conceptual row of aaaRadiusGroupEntry.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaRadiusGroupIndexSpecifies the index for the entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.1 | ||||
| aaaRadiusGroupServerBitMapIdentifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.2 | ||||
| aaaRadiusGroupNameUses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.3 | ||||
| aaaRadiusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.2.1.4 |
aaaTacacsPlusGroupTable
table.1.3.6.1.4.1.259.6.10.94.1.17.12.3
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaTacacsPlusGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::aaaTacacsPlusGroupTable'
Uses a subset of TACACS+ servers for accounting as defined by the server group
A conceptual row of aaaTacacsPlusGroupEntry.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaTacacsPlusGroupIndexSpecifies the index for the entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.1 | ||||
| aaaTacacsPlusGroupServerBitMapIdentifies which TACACS+ sever to use. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.2 | ||||
| aaaTacacsPlusGroupNameUses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.3 | ||||
| aaaTacacsPlusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.3.1.4 |
aaaAccountTable
table.1.3.6.1.4.1.259.6.10.94.1.17.12.5
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaAccountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::aaaAccountTable'
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
A conceptual row of aaaAccountTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaAccountIfIndexDefined as the ifIndex | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.1 | ||||
| aaaAccountMethodNameSpecifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.2 | ||||
| aaaAccountProtocolGet the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.3 | ||||
| aaaAccountStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.5.1.4 |
.1.3.6.1.4.1.259.6.10.94.1.17.12.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaCommandPrivilegesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::aaaCommandPrivilegesTable'
Contains the settings needed for command privileges.
A conceptual row in the aaaCommandPrivilegesTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaCommandPrivilegesLevelSpecifies the privilege level index for the entry. | Integer32 Constraints: range: 0-15 | .1.3.6.1.4.1.259.6.10.94.1.17.12.8.1.1 | ||||
| aaaCommandPrivilegesInterfaceIndexSpecifies the interface index for the entry. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.8.1.2 | ||||
| aaaCommandPrivilegesMethodNameSpecifies the method name in the lists under the mode of command privileges. | OctetStringr/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.6.10.94.1.17.12.8.1.3 |
aaaAccExecTable
table.1.3.6.1.4.1.259.6.10.94.1.17.12.9
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaAccExecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::aaaAccExecTable'
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
A conceptual row of aaaAccExecTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaAccExecIndexThe method of accessing CLI management. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.12.9.1.1 | ||||
| aaaAccExecMethodNameSpecifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.6.10.94.1.17.12.9.1.2 |
networkAccessPortTable
table.1.3.6.1.4.1.259.6.10.94.1.17.13.2
·
1 row entry
·
9 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk networkAccessPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::networkAccessPortTable'
A table contains the information of network access about every port.
A conceptual row in the networkAccessPort table.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| networkAccessPortPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.1 | ||||||
| networkAccessPortMaxMacCountSpecifies the maximum number of authenticated MAC address. | Integer32r/w Constraints: range: 0-1024 | .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.3 | ||||||
| networkAccessPortModeSpecifies the secure port mode. enabled(1) means that Mac address authentication is used and disabled(2) means that the authentication is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.4 | ||||||
| networkAccessPortMacFilterSpecifies the MAC filter ID, Set this variable to zero to disable MAC filter. | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.5 | ||||||
| networkAccessPortGuestVlanSpecifies the guest VLAN ID. To disable the VLAN, set the value to 0. | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.6 | ||||||
| networkAccessPortLinkDetectionStatusSet this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.7 | ||||||
| networkAccessPortLinkDetectionModeSpecifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. Set this object to linkUpDown(3) to detect both link up and l… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.8 | ||||||
| networkAccessPortLinkDetectionAcitonSpecifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDetection event is triggered. Set this object to shutDown(2) t… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.9 | ||||||
| networkAccessPortDynamicQosSet this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.2.1.10 |
.1.3.6.1.4.1.259.6.10.94.1.17.13.4
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk networkAccessMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::networkAccessMacAddressTable'
Contains the information of network access MAC addresses.
A conceptual row in the networkAccessMacAddress table.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| networkAccessMacAddressAddressSpecifies the authenticated MAC address. | .1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.1 | |||||||||||||||
| networkAccessMacAddressPortSpecifies the port of authenticated MAC address. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.2 | ||||||||||||||
| networkAccessMacAddressInetAddressTypeThis object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.3 | ||||||||||||||
| networkAccessMacAddressRadiusServerInetAddressDisplays the IP address of radius server that authenticates the specified Mac address. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.4 | ||||||||||||||
| networkAccessMacAddressTimeDisplays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is preceded by a zer… | OctetString Constraints: range: 12-12 | .1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.5 | ||||||||||||||
| networkAccessMacAddressAttributeDisplays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.4.1.6 |
.1.3.6.1.4.1.259.6.10.94.1.17.13.6
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk networkAccessMacFilterWithMaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::networkAccessMacFilterWithMaskTable'
Contains the settings for MAC filter.
A conceptual row in the networkAccessMacFilterWithMaskTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| networkAccessMacFilterWithMaskIDSpecifies the MAC filter ID. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.1 | ||||
| networkAccessMacFilterWithMaskMacAddressSpecifies the MAC address to be filtered. | .1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.2 | |||||
| networkAccessMacFilterWithMaskMacAddressMaskSpecifies the MAC mask to be filtered. | .1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.3 | |||||
| networkAccessMacFilterWithMaskStatusSet this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.13.6.1.4 |
macAuthPortTable
table.1.3.6.1.4.1.259.6.10.94.1.17.14.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk macAuthPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::macAuthPortTable'
Contains the settings for mac authentication of each port.
A conceptual row in the macAuthPort table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| macAuthPortIndexThe port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.14.2.1.1 | ||||
| macAuthPortMaxMacCountSpecifies the maximum number of authenticated MAC addresses for MAC authentication. | Integer32r/w Constraints: range: 0-1024 | .1.3.6.1.4.1.259.6.10.94.1.17.14.2.1.2 | ||||
| macAuthPortIntrusionActionResponses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthorized clients to the access network. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.14.2.1.3 |
webAuthPortConfigTable
table.1.3.6.1.4.1.259.6.10.94.1.17.15.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk webAuthPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::webAuthPortConfigTable'
Contains the settings for web authentication of each port.
A conceptual row in the webAuthPortConfigTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| webAuthPortConfigPortIndexThe port number of the port that may specify certain entry in the table which contains web authentication information. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.15.9.1.1 | ||||
| webAuthPortConfigStatusSets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.15.9.1.2 | ||||
| webAuthPortConfigAuthenticatedHostCountDisplays the authenticated host counts for each port | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.15.9.1.3 |
webAuthPortInfoTable
table.1.3.6.1.4.1.259.6.10.94.1.17.15.10
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk webAuthPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::webAuthPortInfoTable'
Contains the information for web authentication of each port.
A conceptual row in the webAuthPortTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| webAuthPortInfoPortIndexThe port number for which this entry contains web authentication information. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.1 | ||||||||||||||
| webAuthPortInfoPortAuthSuccessIndexThe authentication success number of port for which this entry contains web authentication information. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.2 | ||||||||||||||
| webAuthPortInfoInetAddressTypeThis object indicates the type of IP address denoted in webAuthPortInfoIpAddress type. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.3 | ||||||||||||||
| webAuthPortInfoInetAddressThe IP address which may specify the entry containing web authentication information. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.4 | ||||||||||||||
| webAuthPortInfoRemainingSessiontimeThe remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-authenticate again. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.5 | ||||||||||||||
| webAuthPortInfoStatusDisplays the web authentication status for each port. authenticated (1) means the user is authenticated. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.17.15.10.1.6 |
remoteLogServerTable
table.1.3.6.1.4.1.259.6.10.94.1.19.6.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteLogServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::remoteLogServerTable'
A Table for storing the remote log Server list.
A conceptually row for remoteLogServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteLogServerIpThe IP address of the remote log Server. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.19.6.4.1.1 | ||||
| remoteLogServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.19.6.4.1.2 |
smtpServerIpTable
table.1.3.6.1.4.1.259.6.10.94.1.19.7.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk smtpServerIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::smtpServerIpTable'
The SMTP server IP table. The maximum servers to be added is 3.
A conceptual row of the smtpServerIpTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| smtpServerIpSMTP mail server's IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.19.7.4.1.1 | ||||
| smtpServerIpStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.19.7.4.1.2 |
smtpDestEMailTable
table.1.3.6.1.4.1.259.6.10.94.1.19.7.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk smtpDestEMailTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::smtpDestEMailTable'
The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5.
A conceptual row of the smtpDestEMailTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| smtpDestEMailSMTP destination e-mail address. | OctetString Constraints: range: 0-41 | .1.3.6.1.4.1.259.6.10.94.1.19.7.5.1.1 | ||||
| smtpDestEMailStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.19.7.5.1.2 |
sntpServerTable
table.1.3.6.1.4.1.259.6.10.94.1.23.1.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sntpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::sntpServerTable'
Table for SNTP servers
Entry for SNTP servers.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sntpServerIndexThe index of a server. This table has fixed size. | Integer32 Constraints: range: 1-3 | .1.3.6.1.4.1.259.6.10.94.1.23.1.4.1.1 |
| sntpServerIpAddressThe IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.23.1.4.1.2 |
ntpServerTable
table.1.3.6.1.4.1.259.6.10.94.1.23.5.5
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ntpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::ntpServerTable'
Table for NTP servers
Entry for NTP servers.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| ntpServerIpAddressThe IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.1 | ||||||
| ntpServerVersionNTP version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.2 | ||||||
| ntpServerKeyIdKey for a NTP server. This variable can only be written. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.3 | ||||||
| ntpServerStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates tha… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.23.5.5.1.4 |
ntpAuthKeyTable
table.1.3.6.1.4.1.259.6.10.94.1.23.5.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ntpAuthKeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::ntpAuthKeyTable'
Table for NTP Authentication keys
Entry for NTP Authentication keys.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| ntpAuthKeyIdThe index of a Authentication key. This table has fixed size. | Integer32 Constraints: range: 1-65536 | .1.3.6.1.4.1.259.6.10.94.1.23.5.6.1.1 | ||||||
| ntpAuthKeyWordThe Authentication key word is used to created a key by the MD5 And the max length is 32. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.259.6.10.94.1.23.5.6.1.2 | ||||||
| ntpAuthKeyStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates tha… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.23.5.6.1.3 |
fileInfoTable
table.1.3.6.1.4.1.259.6.10.94.1.24.2.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk fileInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::fileInfoTable'
This table contain the information of the file system; we can also perform the delete, set startup file operation.
A conceptually row for fileInfoTable.
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| fileInfoUnitIDThe switch unit in a stacking system, in a non-stacking system, this value is always 1. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.1 | ||||||||||||||||||
| fileInfoFileNameThe file Name of the file System in the device. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.2 | ||||||||||||||||||
| fileInfoFileTypeThe file type of the file System in the device. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.3 | ||||||||||||||||||
| fileInfoIsStartUpThis flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.4 | ||||||||||||||||||
| fileInfoFileSizeThe sizes( in bytes) of the file. | bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.5 | ||||||||||||||||||
| fileInfoCreationTimeThe creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-d… | OctetString Constraints: range: 20-20 | .1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.6 | ||||||||||||||||||
| fileInfoDeleteWrite this object to delete(2) to delete a file, when read, this always return noDelete(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.24.2.1.1.7 |
.1.3.6.1.4.1.259.6.10.94.1.24.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk fileAutoDownloadResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::fileAutoDownloadResultTable'
This table contains file auto download result information.
A conceptual row for fileAutoDownloadResultTable.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| fileAutoDownloadResultUnitIDThe switch unit in a stacking system, in a non-stacking system, this value is always 1. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.24.3.1.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| fileAutoDownloadResultActionThe status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be obtained if no auto download action is currently processing. … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.24.3.1.2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| fileAutoDownloadResultStatusThe last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. | FileCopyStatus Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.24.3.1.3 |
dnsHostTable
table.1.3.6.1.4.1.259.6.10.94.1.26.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dnsHostTable'
This table is used to define static host name-to-address mapping.
A conceptual row for the dnsHostTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| dnsHostNameThe DNS Host name. | OctetString Constraints: range: 1-255 | .1.3.6.1.4.1.259.6.10.94.1.26.3.1.1 |
| dnsHostIndexThe secondary index of this dnsHostTable, representing the sequence of the dnsHostIp. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.6.10.94.1.26.3.1.2 |
| dnsHostIpThe DNS Host IP. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.26.3.1.3 |
dnsDomainListTable
table.1.3.6.1.4.1.259.6.10.94.1.26.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsDomainListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dnsDomainListTable'
This table defines a list of default domain names to complete unqualified host names.
A conceptual row for the dnsDomainListTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dnsDomainListNameDomain name. | OctetString Constraints: range: 1-255 | .1.3.6.1.4.1.259.6.10.94.1.26.5.1.1 | ||||
| dnsDomainListStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.26.5.1.2 |
dnsNameServerTable
table.1.3.6.1.4.1.259.6.10.94.1.26.6
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsNameServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dnsNameServerTable'
To specify the address of one or more name servers to use for name and address resolution. This table has fixed size, will get 0.0.0.0 dnsNameServerIp if this entry does not exist.
A conceptual row for dnsNameServerTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| dnsNameServerIndexIndex of this dnsNameServerTable, representing the sequence of the dnsNameServerIp. | Integer32 Constraints: range: 1-6 | .1.3.6.1.4.1.259.6.10.94.1.26.6.1.1 |
| dnsNameServerIpIP address of name server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.26.6.1.2 |
dnsCacheTable
table.1.3.6.1.4.1.259.6.10.94.1.26.7
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dnsCacheTable'
To display the RRs in DNS cache.
A conceptual row for the dnsCacheTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dnsCacheIndexThe entry sequence number. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.26.7.1.1 | ||||
| dnsCacheFlagAlways get 4, means this record is unreliable. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.26.7.1.2 | ||||
| dnsCacheTypeCache Type: address(1); cname(2). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.26.7.1.3 | ||||
| dnsCacheIpThe DNS cache IP. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.26.7.1.4 | ||||
| dnsCacheTtlThe DNS cache TTL. | Integer32 Constraints: range: 0-876000 | .1.3.6.1.4.1.259.6.10.94.1.26.7.1.5 | ||||
| dnsCacheDomainThe DNS cache domain. | OctetString Constraints: range: 1-255 | .1.3.6.1.4.1.259.6.10.94.1.26.7.1.6 |
mcastStormTable
table.1.3.6.1.4.1.259.6.10.94.1.33.1.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mcastStormTable'
Table to manage the control of multicast storms for ports.
The conceptual row of multiStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mcastStormIfIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.1.1.1.1 | ||||
| mcastStormStatusWhether multicast storm protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.1.1.1.2 | ||||
| mcastStormOctetRateMulticast storm threshold as octets per second. If this entry is for a trunk, this is the value for each member port. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.1.1.1.5 |
bcastStormTable
table.1.3.6.1.4.1.259.6.10.94.1.33.3.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk bcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::bcastStormTable'
Table to manage the control of broadcast storms for ports.
The conceptual row of bcastStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| bcastStormIfIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.3.1.1.1 | ||||
| bcastStormStatusWhether broadcast storm protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.3.1.1.2 | ||||
| bcastStormOctetRateBroadcast storm threshold as octets per second. If this entry is for a trunk, this is the value for each member port. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.3.1.1.5 |
unknownUcastStormTable
table.1.3.6.1.4.1.259.6.10.94.1.33.4.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk unknownUcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::unknownUcastStormTable'
Table to manage the unknown unicast storm control.
The conceptual row of unknownUcastStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| unknownUcastStormIfIndexThe port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.4.1.1.1 | ||||
| unknownUcastStormStatusThe parameter indicates that the unknown unicast storm protection is enabled/disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.4.1.1.2 | ||||
| unknownUcastStormOctetRateThe parameter indicates the byte rate of the storm protection. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.4.1.1.5 |
atcBcastStormTable
table.1.3.6.1.4.1.259.6.10.94.1.33.5.3
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk atcBcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::atcBcastStormTable'
The table contains the Auto Traffic Control configuration and the status for broadcast traffic.
The conceptual row of the table.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| atcBcastStormIfIndexThe specified port on which the ATC is applied. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.1 | ||||||
| atcBcastStormEnableThe parameter indicates whether the ATC of the broadcast traffic is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.2 | ||||||
| atcBcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature of ATC is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.3 | ||||||
| atcBcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.4 | ||||||
| atcBcastStormCurrentTrafficRateThe parameter indicates the current broadcast traffic rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.5 | ||||||
| atcBcastStormAlarmFireThresholdThe parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.6 | ||||||
| atcBcastStormAlarmClearThresholdThe parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.7 | ||||||
| atcBcastStormTcActionThe parameter indicates the protecting action which ATC will applied to the specified port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.8 | ||||||
| atcBcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has to be sent when the broadcast storm has been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.9 | ||||||
| atcBcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.10 | ||||||
| atcBcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is activated. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.11 | ||||||
| atcBcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is released. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.3.1.12 |
atcMcastStormTable
table.1.3.6.1.4.1.259.6.10.94.1.33.5.6
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk atcMcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::atcMcastStormTable'
The table contains the Auto Traffic Control configuration and the status for mulicast traffic.
The conceptual row of the table.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| atcMcastStormIfIndexThe specified port on which the ATC is applied. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.1 | ||||||
| atcMcastStormEnableThe parameter indicates whether the ATC of the mulicast traffic is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.2 | ||||||
| atcMcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature of ATC is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.3 | ||||||
| atcMcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.4 | ||||||
| atcMcastStormCurrentTrafficRateThe parameter indicates the current mulicast traffic rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.5 | ||||||
| atcMcastStormAlarmFireThresholdThe parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.6 | ||||||
| atcMcastStormAlarmClearThresholdThe parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.7 | ||||||
| atcMcastStormTcActionThe parameter indicates the protecting action which ATC will applied to the specified port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.8 | ||||||
| atcMcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has to be sent when the mulicast storm has been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.9 | ||||||
| atcMcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.10 | ||||||
| atcMcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is activated. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.11 | ||||||
| atcMcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is released. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.33.5.6.1.12 |
mvrGroupStaticTable
table.1.3.6.1.4.1.259.6.10.94.1.44.7
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrGroupStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrGroupStaticTable'
The table for configuring the static members of the MVR group.
The entry for configuring the static members of the
MVR group.
MVR group.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrGroupStaticAddressThe multicast address of the MVR group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.7.1.1 | ||||
| mvrGroupStaticPortsThe set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.6.10.94.1.44.7.1.2 | ||||
| mvrGroupStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.44.7.1.3 |
mvrGroupCurrentTable
table.1.3.6.1.4.1.259.6.10.94.1.44.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrGroupCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrGroupCurrentTable'
The table for the current members of the MVR group.
The entry for the current members of the MVR group.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvrGroupCurrentAddressThe multicast address of the MVR group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.8.1.1 |
| mvrGroupCurrentPortsThe complete set of ports currently associated with this MVR group. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.6.10.94.1.44.8.1.2 |
| mvrGroupCurrentReceiverVlanThis object indicates the receiver VLAN of the MVR group. None of receiver VLAN belong to the MVR group when the value of this object is 0. | Integer32 Constraints: range: 0-4094 | .1.3.6.1.4.1.259.6.10.94.1.44.8.1.3 |
mvrPortTable
table.1.3.6.1.4.1.259.6.10.94.1.44.9
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrPortTable'
The table for configuring the MVR port.
The entry for configuring the MVR port.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| mvrIfIndexThe port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.44.9.1.1 | ||||||
| mvrPortTypeFor configuring the MVR port type. To disable the MVR port type, use the none(0). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.44.9.1.2 | ||||||
| mvrPortImmediateLeaveTo enable immediate leave on MVR port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.44.9.1.3 | ||||||
| mvrPortActiveTo indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.44.9.1.4 |
mvrReceiverGroupTable
table.1.3.6.1.4.1.259.6.10.94.1.44.15
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrReceiverGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrReceiverGroupTable'
The table for configuring the MVR receiver group.
The entry for configuring the MVR receiver group.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrReceiverGroupIdThe multicast address of a MVR receiver group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.15.1.1 | ||||
| mvrReceiverGroupActiveIndicate whether the receiver group has a member or not. If there are no members, the status will be inactive(2); if there are members, the status will be active(1). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.44.15.1.2 |
.1.3.6.1.4.1.259.6.10.94.1.44.16
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrReceiverGroupStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrReceiverGroupStaticTable'
The table for configuring static members of the MVR receiver group.
The entry for configuring static members of the
MVR receiver group.
MVR receiver group.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvrReceiverGroupStaticAddressThe multicast address of a MVR receiver group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.16.1.1 |
| mvrReceiverGroupStaticPortsThe set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR receiver group. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.6.10.94.1.44.16.1.2 |
.1.3.6.1.4.1.259.6.10.94.1.44.17
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrReceiverGroupCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrReceiverGroupCurrentTable'
The table for the current members of a MVR receiver group.
The entry for the current members of a MVR receiver group.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvrReceiverGroupCurrentAddressThe multicast address of a MVR receiver group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.17.1.1 |
| mvrReceiverGroupCurrentPortsThe complete set of ports currently associated with a MVR receiver group. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.6.10.94.1.44.17.1.2 |
mvrGroupCtlTable
table.1.3.6.1.4.1.259.6.10.94.1.44.26
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrGroupCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrGroupCtlTable'
Configure MVR group range
The entry for configuring the MVR group range.
If configured range overlap to old one, it will be combinded with old one.
If configured range overlap to old one, it will be combinded with old one.
| Column | Syntax | OID |
|---|---|---|
| mvrGroupStartIPAddressMVR Profile range start IP address. NOTE: All mvrGroupStartIPAddress use the same buffer to temply store the mvrGroupStartIPAddress before mvrGroupCtlAction really creat the profile. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.26.1.1 |
| mvrGroupEndIPAddressMVR group range end IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.26.1.2 |
mvrRecieverGroupCtlTable
table.1.3.6.1.4.1.259.6.10.94.1.44.29
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrRecieverGroupCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::mvrRecieverGroupCtlTable'
Configure MVR receiver group
The entry for configuring the MVR receiver group.
| Column | Syntax | OID |
|---|---|---|
| mvrReceiverGroupIPAddressMVR receiver group IP address. NOTE: All mvrReceiverGroupIPAddress use the same buffer to temply store the mvrReceiverGroupIPAddress before mvrReceiverGroupCtlAction really creat the profile. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.29.1.1 |
| mvrReceiverGroupMaskMVR receiver group IP mask. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.44.29.1.2 |
dhcpSnoopVlanConfigTable
table.1.3.6.1.4.1.259.6.10.94.1.46.2.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dhcpSnoopVlanConfigTable'
A table contains DHCP Snooping configurations of existing VLANs.
An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.
or disable DHCP Snooping at each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpSnoopVlanIndexThis object indicates the VLAN ID on which DHCP Snooping feature is configured. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.6.10.94.1.46.2.1.1.1 | ||||
| dhcpSnoopVlanEnableThis object indicates whether DHCP Snooping is enabled in this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.46.2.1.1.2 |
dhcpSnoopPortConfigTable
table.1.3.6.1.4.1.259.6.10.94.1.46.3.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dhcpSnoopPortConfigTable'
A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose.
An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose.
trust state of each port or trunk for DHCP Snooping purpose.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpSnoopPortIfIndexThe ifIndex value of the port or trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.1 | ||||
| dhcpSnoopPortTrustEnableThis object indicates whether the port or trunk is trusted for DHCP Snooping purpose. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.2 | ||||
| dhcpSnoopPortCircuitIDModeProvide two mode for insertion circuit-id sub-option of option 82. If configured-string(2) has been set, dhcpSnoopPortCircuitIDString will take effect. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.3 | ||||
| dhcpSnoopPortCircuitIDStringSet string to circuit-id sub-option of option 82. It only take effect when dhcpSnoopPortCircuitIDMode is set to configured-string(2) | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.259.6.10.94.1.46.3.1.1.4 |
dhcpSnoopBindingsTable
table.1.3.6.1.4.1.259.6.10.94.1.46.4.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopBindingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::dhcpSnoopBindingsTable'
A table contains the DHCP bindings information learnt by the device.
An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.
IP address, VLAN number, interface number, leased time and
status.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpSnoopBindingsVlanIndexThis object indicates the VLAN which a DHCP client host belongs to. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.1 | ||||||||||||||
| dhcpSnoopBindingsMacAddressThis object indicates the MAC address of a DHCP client host. | .1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.2 | |||||||||||||||
| dhcpSnoopBindingsAddrTypeThis object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.3 | ||||||||||||||
| dhcpSnoopBindingsEntryTypeThis object indicates that this binding is obtained from dynamically learning or is a static configuraion. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.4 | ||||||||||||||
| dhcpSnoopBindingsIpAddressThis object indicates the allocated IP address of a DHCP client host. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.5 | ||||||||||||||
| dhcpSnoopBindingsPortIfIndexThis object indicates the port or trunk where a DHCP client host connects to. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.6 | ||||||||||||||
| dhcpSnoopBindingsLeaseTimeThis object indicates the leased time of this DHCP bindings. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.46.4.1.1.7 |
clusterCandidateTable
table.1.3.6.1.4.1.259.6.10.94.1.47.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk clusterCandidateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::clusterCandidateTable'
A table listing cluster candidates.
A conceptual row containing the information of the candidate.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| clusterCandidateMacAddrThe MAC address of the candidate. | .1.3.6.1.4.1.259.6.10.94.1.47.9.1.1 | |||||||
| clusterCandidateDescThe description of the candidate. | OctetString Constraints: range: 0-42 | .1.3.6.1.4.1.259.6.10.94.1.47.9.1.3 | ||||||
| clusterCandidateRoleThe role of the candidate. candidate(2) : The switch is discovered by the commander, but it has not been manually configured for access from the commander. activeMember(3) : Th… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.47.9.1.4 |
clusterMemberTable
table.1.3.6.1.4.1.259.6.10.94.1.47.10
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk clusterMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::clusterMemberTable'
A table listing clustering members.
A conceptual row containing the information of the member.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| clusterMemberIdThe ID of the member. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.47.10.1.1 | ||||
| clusterMemberMacAddrThe MAC address of the member. | .1.3.6.1.4.1.259.6.10.94.1.47.10.1.2 | |||||
| clusterMemberDescThe description of the member. | OctetString Constraints: range: 0-42 | .1.3.6.1.4.1.259.6.10.94.1.47.10.1.3 | ||||
| clusterMemberActiveThe active status of the member. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMember(4): The switch is… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.47.10.1.4 |
ipSrcGuardConfigTable
table.1.3.6.1.4.1.259.6.10.94.1.48.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipSrcGuardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::ipSrcGuardConfigTable'
A table contains the configurations to enable or disable IP Source Guard at each port or trunk.
An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk.
or disable IP Source Guard at each port or trunk.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| ipSrcGuardPortIfIndexThis object idents the port or trunk which is capable of IP Source Guard feature. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.48.1.1.1 | ||||||
| ipSrcGuardModeThis object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1, it means Ip Source Guard is enabled, and packets are filte… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.48.1.1.2 |
ipSrcGuardAddrTable
table.1.3.6.1.4.1.259.6.10.94.1.48.2
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipSrcGuardAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::ipSrcGuardAddrTable'
A table contains the IP Source Guard bindings information learnt by the device.
An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.
IP address, VLAN number, interface number, leased time and
status.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ipSrcGuardBindingsVlanIndexThis object indicates the VLAN which a DHCP client host belongs to. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.6.10.94.1.48.2.1.1 | ||||||||||||||
| ipSrcGuardBindingsMacAddressThis object indicates the MAC address of a DHCP client host. | .1.3.6.1.4.1.259.6.10.94.1.48.2.1.2 | |||||||||||||||
| ipSrcGuardBindingsAddrTypeThis object indicates the type of IP address denoted in ipSrcGuardBindingsIpAddress type. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.48.2.1.3 | ||||||||||||||
| ipSrcGuardBindingsEntryTypeThis object indicates that this binding is obtained from dynamically learning or is a static configuraion. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.48.2.1.4 | ||||||||||||||
| ipSrcGuardBindingsIpAddressThis object indicates the allocated IP address of a DHCP client host. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.48.2.1.5 | ||||||||||||||
| ipSrcGuardBindingsPortIfIndexThis object indicates the port or trunk where a DHCP client host connects to. | IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.48.2.1.6 | ||||||||||||||
| ipSrcGuardBindingsLeaseTimeThis object indicates the leased time of this DHCP bindings. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.6.10.94.1.48.2.1.7 | ||||||||||||||
| ipSrcGuardBindingsStatusThe status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is avail… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.48.2.1.8 |
sFlowPortTable
table.1.3.6.1.4.1.259.6.10.94.1.55.2
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sFlowPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::sFlowPortTable'
A table that contains the settings of sFlow.
The conceptual row of sFlowPortTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| sFlowPortIndexThe port number of a port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.55.2.1.1 | ||||
| sFlowPortStatusSet this to enabled(1) to enable sFlow on this port, and set this to disabled(2) to disable sFlow on this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.55.2.1.2 |
daiVlanTable
table.1.3.6.1.4.1.259.6.10.94.1.56.2.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::daiVlanTable'
A table contains dynamic ARP inspection configurations for existing VLANs.
An instance containing the configuration of dynamic ARP
inspection for each existing VLAN.
inspection for each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| daiVlanIndexThis object indicates the VLAN ID on which dynamic ARP inspection is configured. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.1 | ||||
| daiVlanStatusThis object indicates whether dynamic ARP inspection is enabled in this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.2 | ||||
| daiVlanArpAclNameSpecifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.3 | ||||
| daiVlanArpAclStatusSet to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping binding table. When daiVlanArpAclName is configured, the default v… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.56.2.1.1.4 |
daiPortTable
table.1.3.6.1.4.1.259.6.10.94.1.56.3.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::daiPortTable'
A table containing dynamic ARP inspection configurations for port interfaces.
An instance containing the configuration of dynamic ARP
inspection at each port interface.
inspection at each port interface.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| daiPortIfIndexThe ifIndex value of the port. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.56.3.1.1.1 | ||||
| daiPortTrustStatusThis object indicates whether the port is trusted for dynamic ARP inspection. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.6.10.94.1.56.3.1.1.2 | ||||
| daiPortRateLimitThe value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. | Unsigned32r/w Constraints: range: 0-2048range: 4294967295-4294967295 | .1.3.6.1.4.1.259.6.10.94.1.56.3.1.1.3 |
daiLogTable
table.1.3.6.1.4.1.259.6.10.94.1.56.4.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::daiLogTable'
A table containing dynamic ARP inspection log information.
An instance containing log information of dynamic ARP
inspection at each VLAN interface.
inspection at each VLAN interface.
Indexes
| Column | Syntax | OID |
|---|---|---|
| daiLogIndexThis object indicates the index of dynamic ARP inspection log information. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.1 |
| daiLogVlanThis object indicates the VLAN ID of dynamic ARP inspection log information. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.2 |
| daiLogPortThis object indicates the ifIndex of dynamic ARP inspection log information. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.3 |
| daiLogSrcIpAddressThe source IP address of dynamic ARP inspection log information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.4 |
| daiLogDestIpAddressThe destination IP address of dynamic ARP inspection log information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.5 |
| daiLogSrcMacAddressThe source MAC address of dynamic ARP inspection log information. | .1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.6 | |
| daiLogDestMacAddressThe destination MAC address of dynamic ARP inspection log information. | .1.3.6.1.4.1.259.6.10.94.1.56.4.1.1.7 |
erpsDomainTable
table.1.3.6.1.4.1.259.6.10.94.1.62.2
·
1 row entry
·
21 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk erpsDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::erpsDomainTable'
Table for ERPS domain configuration.
Entry for ERPS domain configuration.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| erpsDomainIndexAn index that uniquely identifies an entry in the erpsDomainTable. | Integer32 Constraints: range: 1-2 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.1 | ||||||||||||
| erpsDomainNameThe domain name that uniquely identifies an entry in the erpsDomainTable. | OctetStringr/w Constraints: range: 1-12 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.2 | ||||||||||||
| erpsDomainMegLevelConfigures the maintenance entity group (MEG) level which is used to provide a communication channel for ring automatic protection switching (R-APS) information. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.3 | ||||||||||||
| erpsDomainNodeIdConfigures the node id whcih is a MAC address unique to the ring node. | r/w | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.4 | ||||||||||||
| erpsDomainWestRingPortEach node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the west port for the specified domain. The east port and west port can not be conf… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.5 | ||||||||||||
| erpsDomainEastRingPortEach node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the east port for the specified domain. The east port and west port can not be conf… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.6 | ||||||||||||
| erpsDomainRplOwnerSet to enabled(1) to make this node act as a RPL owner. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.62.2.1.7 | ||||||||||||
| erpsDomainRplPortThis value displays the port for ring protection link which under normal conditions, i.e., without any failure or request, is blocked for traffic channel, to prevent the formation of loops. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.62.2.1.8 | ||||||||||||
| erpsDomainGuardTimerConfigures the value of the guard timer which is used to prevent ring nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms. | Integer32r/w Constraints: range: 10-2000 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.9 | ||||||||||||
| erpsDomainHoldoffTimerConfigures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer value is non-zero. The range is in 100 ms steps between 0 and… | Integer32r/w Constraints: range: 0-10000 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.10 | ||||||||||||
| erpsDomainWtrTimerConfigures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermittent failures. The range is in 1 minute steps between 5 and 12… | Integer32r/w Constraints: range: 5-12 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.11 | ||||||||||||
| erpsDomainControlVlanIDThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS domain. The control VLAN is used only to send and receive ERPS message. A control VLAN can not belong to more than one ERP… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.12 | ||||||||||||
| erpsDomainNodeStateThis value displays the node's current state. It displays one of the following states (1). init -- The node is in the init state. (The node state will stay in init state, if global status or domain status is n… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.62.2.1.13 | ||||||||||||
| erpsDomainWestRingPortStateThis value displays the west ring port's current state. It displays one of the following states (1). unknown -- The port's current state is unknown. (The port's current state will stay in unknown state if the … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.62.2.1.14 | ||||||||||||
| erpsDomainEastRingPortStateThis value displays the east ring port's current state. It displays one of the following states (1). unknown -- The port's current state is unknown. (The port's current state will stay in unknown state if the … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.62.2.1.15 | ||||||||||||
| erpsDomainRowStatusThe status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates th… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.16 | ||||||||||||
| erpsDomainMajorDomainIndexAn index that uniquely identifies an entry in the erpsDomainTable. A value of 0 means this domain has no major domain. Notes: This objest can not be configured if erpsDomainRingPortEast has a vaule other than 0. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.17 | ||||||||||||
| erpsDomainPropagateTCSet to enabled(1) to transmit topology change signal to the major domain. It will not take effect, if erpsDomainMajorDomainIndex has a value of 0. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.62.2.1.18 | ||||||||||||
| erpsDomainWestMepIdConfigures a CFM Down MEP on west ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no west MEP is not configured for this domain. | Integer32r/w Constraints: range: 0-8191 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.20 | ||||||||||||
| erpsDomainEastMepIdConfigures a CFM Down MEP on east ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0 means no east MEP is not configured for this domain. | Integer32r/w Constraints: range: 0-8191 | .1.3.6.1.4.1.259.6.10.94.1.62.2.1.21 | ||||||||||||
| erpsDomainNonErpsDevProtectSet to enabled(1) to use non-standard protection mechanism for network containing non-ERPS devices. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.62.2.1.22 |
lbdPortTable
table.1.3.6.1.4.1.259.6.10.94.1.63.2.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk lbdPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528MO-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528MO-MIB::lbdPortTable'
A table containing LBD configurations for all interfaces.
An instance containing the configuration of LBD at each
interface.
interface.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| lbdPortIfIndexThe ifIndex value of the port. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.1 | ||||||
| lbdPortAdminStateThe LBD administrative port status. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.2 | ||||||
| lbdPortOperStateThe LBD operative port status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.3 | ||||||
| lbdPortLoopedVlanThe list of VLANs on which loopback is detected. Only when oper state is looped and mode is VLAN-based, the value is nonzero. | OctetString Constraints: range: 0-512 | .1.3.6.1.4.1.259.6.10.94.1.63.2.1.1.4 |