ES3528-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
143
Rows
143
Columns
683
switchInfoTable
table.1.3.6.1.4.1.259.8.2.1.1.1.3
·
1 row entry
·
16 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::switchInfoTable'
Table of descriptive and status information about the switch units in this system.
Table providing descriptions and status information for
switch units.
switch units.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swUnitIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.1 | ||||||||||||||||||||||||||||||||||||||
| swHardwareVerHardware version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.2 | ||||||||||||||||||||||||||||||||||||||
| swMicrocodeVerMicrocode version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.3 | ||||||||||||||||||||||||||||||||||||||
| swLoaderVerLoader version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.4 | ||||||||||||||||||||||||||||||||||||||
| swBootRomVerBoot ROM code version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.5 | ||||||||||||||||||||||||||||||||||||||
| swOpCodeVerOperation code version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.6 | ||||||||||||||||||||||||||||||||||||||
| swPortNumberThe number of ports on this switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.7 | ||||||||||||||||||||||||||||||||||||||
| swPowerStatusIndicates the switch using internalPower(1), redundantPower(2) or both(3) | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.3.1.8 | ||||||||||||||||||||||||||||||||||||||
| swRoleInSystemIndicates the switch is master(1), backupMaster(2) or slave(3) in this system. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.3.1.9 | ||||||||||||||||||||||||||||||||||||||
| swSerialNumberSerial number of the switch. | OctetString Constraints: range: 0-80 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.10 | ||||||||||||||||||||||||||||||||||||||
| swExpansionSlot1Type of expansion module in this switch slot 1. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.3.1.11 | ||||||||||||||||||||||||||||||||||||||
| swExpansionSlot2Type of expansion module in this switch slot 2. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.3.1.12 | ||||||||||||||||||||||||||||||||||||||
| swServiceTagService tag serial-number of the switch. | OctetString Constraints: range: 0-80 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.13 | ||||||||||||||||||||||||||||||||||||||
| swModelNumberModel number of the switch. | OctetString Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.14 | ||||||||||||||||||||||||||||||||||||||
| swEpldVerThe EPLD version of the switch. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.15 | ||||||||||||||||||||||||||||||||||||||
| swExpectedModuleOpCodeVerThe module opcode version reside in the switch, note that this variable represent the desired version of the module which might plug in. For version validation, only the swExpectedModuleOpCodeVer of the master is used… | OctetString Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.1.3.1.16 |
switchIndivPowerTable
table.1.3.6.1.4.1.259.8.2.1.1.1.6
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchIndivPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::switchIndivPowerTable'
Table about the status of individual powers.
Table about the status of individual power.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swIndivPowerUnitIndexThis is defined as swUnitIndex. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.6.1.1 | ||||||||||||||
| swIndivPowerIndex1 means internal power, 2 means external power. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.6.1.2 | ||||||||||||||
| swIndivPowerStatusnotPresent(1) means not present, green(2) means up, red(3) means down. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.6.1.3 | ||||||||||||||
| swIndivPowerTypeThese parameters indicate the power type used by the module. The value dc-n48(1) means that the power module uses DC-N48 as power input. The value dc-p27(2) means that the power module uses DC-P27 as power input. The va… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.6.1.4 |
switchFanTable
table.1.3.6.1.4.1.259.8.2.1.1.1.9
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::switchFanTable'
The fan status table.
A conceptual row of the switchFanTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| switchUnitIndexThe unit of the switch for the stackable device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.9.1.1 | ||||
| switchFanIndexThe unit number of the fan. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.9.1.2 | ||||
| switchFanStatusIndicating the status of the fan, 1:ok; 2:failure. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.9.1.3 | ||||
| switchFanAdminSpeedThe speed of the fan, measured in rpm (rotations per minute). Set this object to 0 to enter auto mode, set to other values to enter manual mode. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.9.1.4 | ||||
| switchFanFailureCountThe total failure count of the fan since the switch has reboot. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.9.1.5 | ||||
| switchFanOperSpeedThe operational value of the fan speed, measured in rpm (rotations per minute). | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.9.1.6 |
switchThermalTempTable
table.1.3.6.1.4.1.259.8.2.1.1.1.11
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchThermalTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::switchThermalTempTable'
The table which collects temperature infomration of the switch.
A conceptual row of the switchThermalTempTable.
| Column | Syntax | OID |
|---|---|---|
| switchThermalTempUnitIndexThe unit of the switch for stackable device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.11.1.1 |
| switchThermalTempThermalIndexThe thermal index of the switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.11.1.2 |
| switchThermalTempValueThe temperature value in the device in grade Celsius. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.11.1.3 |
switchThermalActionTable
table.1.3.6.1.4.1.259.8.2.1.1.1.12
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchThermalActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::switchThermalActionTable'
The table for configuring the thermal action.
A conceptual row of the switchThermalActionTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| switchThermalActionUnitIndexThe unit of the switch for stackable device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.12.1.1 | ||||
| switchThermalActionThermalIndexThe thermal index of the switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.12.1.2 | ||||
| switchThermalActionIndexThe action index of the switchTheramlActionTable. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.12.1.3 | ||||
| switchThermalActionRisingThresholdThe rising threshold of the switch temperature. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.12.1.4 | ||||
| switchThermalActionFallingThresholdThe falling threshold of the switch temperature. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.12.1.5 | ||||
| switchThermalActionActionThe action that will be taken when the temperature exceeds the rising threshold or falls below the falling threshold. | Bitsr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.12.1.6 | ||||
| switchThermalActionStatusSet valid(1) to create an entry, Set Invalid(2) to delete an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.12.1.7 |
switchModuleInfoTable
table.1.3.6.1.4.1.259.8.2.1.1.1.13
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchModuleInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::switchModuleInfoTable'
Table of descriptive and status information about the switch modules in this system.
Table providing descriptions and status information for
switch modules.
switch modules.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swModuleUnitIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.1 | ||||||||||||||||||||||||||||||||||||||
| swModuleModuleIndexThis object identifies the module within the switch for which this entry contains information. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.2 | ||||||||||||||||||||||||||||||||||||||
| swModuleHardwareVerHardware version of the module board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.3 | ||||||||||||||||||||||||||||||||||||||
| swModuleMicrocodeVerMicrocode version of the module board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.4 | ||||||||||||||||||||||||||||||||||||||
| swModuleLoaderVerLoader version of the module board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.5 | ||||||||||||||||||||||||||||||||||||||
| swModuleBootRomVerBoot ROM code version of the module board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.6 | ||||||||||||||||||||||||||||||||||||||
| swModuleOpCodeVerOperation code version of the module board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.7 | ||||||||||||||||||||||||||||||||||||||
| swModulePortNumberThe number of ports of this module. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.8 | ||||||||||||||||||||||||||||||||||||||
| swModuleSerialNumberSerial number of the module. | OctetString Constraints: range: 0-80 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.9 | ||||||||||||||||||||||||||||||||||||||
| swModuleTypeType of module. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.1.13.1.10 | ||||||||||||||||||||||||||||||||||||||
| swModuleModelNumberModel number of the module. | OctetString Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.11 | ||||||||||||||||||||||||||||||||||||||
| swModuleEpldVerThe EPLD version of the module. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.12 | ||||||||||||||||||||||||||||||||||||||
| swModuleDescrA textual description of the entity to describe the module. | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.259.8.2.1.1.1.13.1.13 |
portTable
table.1.3.6.1.4.1.259.8.2.1.1.2.1
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::portTable'
Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk.
An entry in the table, describing the configuration of
one switch port or trunk.
one switch port or trunk.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| portIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.2.1.1.1 | ||||||||||||||||||||||||||||||||
| portNameThe name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.8.2.1.1.2.1.1.2 | ||||||||||||||||||||||||||||||||
| portTypeIndicates the port type of the configuration of the switch. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.3 | ||||||||||||||||||||||||||||||||
| portSpeedDpxCfgConfigures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and hal… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.4 | ||||||||||||||||||||||||||||||||
| portFlowCtrlCfg(1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.5 | ||||||||||||||||||||||||||||||||
| portCapabilitiesPort or trunk capabilities. | Bitsr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.6 | ||||||||||||||||||||||||||||||||
| portAutonegotiationWhether auto-negotiation is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.7 | ||||||||||||||||||||||||||||||||
| portSpeedDpxStatusThe operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case t… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.8 | ||||||||||||||||||||||||||||||||
| portFlowCtrlStatus(2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently conf… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.9 | ||||||||||||||||||||||||||||||||
| portTrunkIndexThe trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding tru… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.2.1.1.10 | ||||||||||||||||||||||||||||||||
| portComboForcedModeThis determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.12 | ||||||||||||||||||||||||||||||||
| portMdixModeThis parameter can be configured to auto(1), which means the connection mode will be auto detected; straight(2), which means the connection is used the straight-through twisted pair cabling; and crossover(3), which mean… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.1.1.14 |
portPacketFilterTable
table.1.3.6.1.4.1.259.8.2.1.1.2.5
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portPacketFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::portPacketFilterTable'
Configure to filter some special packets.
Configure to filter some special packets.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| portPacketFilterIfIndexThe port interface of the portPacketFilterTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.2.5.1.1 | ||||
| portPacketFilterCdpStatusWhether CDP paket filtering is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.5.1.2 | ||||
| portPacketFilterPvstStatusWhether PVST paket filtering is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.5.1.3 |
portVlanTrunkingTable
table.1.3.6.1.4.1.259.8.2.1.1.2.7
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portVlanTrunkingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::portVlanTrunkingTable'
Configures vlan trunking feature.
Configures vlan trunking feature.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| portVlanTrunkingIfIndexThe port and trunk interface of the portVlanTrunkingTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.2.7.1.1 | ||||
| portVlanTrunkingStatusWhether vlan trunking is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.2.7.1.2 |
trunkTable
table.1.3.6.1.4.1.259.8.2.1.1.3.3
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk trunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::trunkTable'
Table describing the configuration and status of each trunk.
An entry describing the configuration and status of a
particular trunk.
particular trunk.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| trunkIndexIdentifies the trunk within the switch that is described by the table entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.3.3.1.1 | ||||
| trunkPortsThe complete set of ports currently associated with this trunk. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.8.2.1.1.3.3.1.2 | ||||
| trunkCreationA value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.3.3.1.3 | ||||
| trunkStatusWriting this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.3.3.1.4 |
lacpPortTable
table.1.3.6.1.4.1.259.8.2.1.1.4.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk lacpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::lacpPortTable'
Table for LACP port configuration.
Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| lacpPortIndexThe port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.4.1.1.1 | ||||
| lacpPortStatusWhether 802.3ad LACP is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.4.1.1.2 |
staPortTable
table.1.3.6.1.4.1.259.8.2.1.1.5.2
·
1 row entry
·
15 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk staPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::staPortTable'
The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType.
The conceptual entry of staPortTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| staPortFastForwardWhether fast forwarding is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.2 | ||||||
| staPortProtocolMigrationWhen operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.5.2.1.3 | ||||||
| staPortAdminEdgePortThe administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.5.2.1.4 | ||||||
| staPortOperEdgePortThe operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.5.2.1.5 | ||||||
| staPortAdminPointToPointThe administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.6 | ||||||
| staPortOperPointToPointThe operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-de… | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.5.2.1.7 | ||||||
| staPortSystemStatusPer-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.9 | ||||||
| staPortLongAdminPathCostThe admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This obje… | Integer32r/w Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.8.2.1.1.5.2.1.10 | ||||||
| staPortLongOperPathCostThe oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This objec… | Integer32 Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.8.2.1.1.5.2.1.11 | ||||||
| staPortBpduFloodingThis parameter is used to configure the capability of BPDUs flooding. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.12 | ||||||
| staPortRootGuardAdminStatusSpecifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.13 | ||||||
| staPortRootGuardOperStatusThe current operational status of the root guard which provides a way to enforce the root bridge placement in the network. | P-BRIDGE-MIBEnabledStatus Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.14 | ||||||
| staPortBpduGuardA value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.15 | ||||||
| staPortAdminEdgePortWithAutoThe administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) indicates that this port should be assumed as a non-edge-port a… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.16 | ||||||
| staPortBpduFilterThe administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indicates that this port will not avoid trans… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.2.1.17 |
xstInstanceCfgTable
table.1.3.6.1.4.1.259.8.2.1.1.5.6.4
·
1 row entry
·
16 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk xstInstanceCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::xstInstanceCfgTable'
This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use, the mstInstanceEditIndex is always 0.
A conceptual row containing the property of the RST or MST instance.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| xstInstanceCfgIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.1 | ||||
| xstInstanceCfgPriorityThe priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. | Integer32r/w Constraints: range: 0-61440 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.2 | ||||
| xstInstanceCfgTimeSinceTopologyChangeThe time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.3 | ||||
| xstInstanceCfgTopChangesThe total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.4 | ||||
| xstInstanceCfgDesignatedRootThe bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the root iden… | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.5 | ||||
| xstInstanceCfgRootCostThe cost of the path to the root as seen from this bridge of the RST or MST. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.6 | ||||
| xstInstanceCfgRootPortThe number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.7 | ||||
| xstInstanceCfgMaxAgeThe maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it is discarded, in units of hundredths of a second. This is… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.8 | ||||
| xstInstanceCfgHelloTimeThe amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.9 | ||||
| xstInstanceCfgHoldTimeThis time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.10 | ||||
| xstInstanceCfgForwardDelayFor RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the p… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.11 | ||||
| xstInstanceCfgBridgeMaxAgeFor RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the … | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.12 | ||||
| xstInstanceCfgBridgeHelloTimeFor RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.13 | ||||
| xstInstanceCfgBridgeForwardDelayFor RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.14 | ||||
| xstInstanceCfgTxHoldCountFor RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.15 | ||||
| xstInstanceCfgPathCostMethodFor RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value o… | StaPathCostMode Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.6.4.1.16 |
xstInstancePortTable
table.1.3.6.1.4.1.259.8.2.1.1.5.6.5
·
1 row entry
·
11 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk xstInstancePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::xstInstancePortTable'
The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration.
The conceptual row for xstInstancePortTable.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| xstInstancePortPriorityDefines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active li… | Integer32r/w Constraints: range: 0-240 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.3 | ||||||||||||
| xstInstancePortStateThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1): Port receives configuration messages, … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.4 | ||||||||||||
| xstInstancePortEnableThe enabled/disabled status of the port. | P-BRIDGE-MIBEnabledStatus Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.5 | ||||||||||||
| xstInstancePortDesignatedRootThe unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the port is attached. | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.7 | ||||||||||||
| xstInstancePortDesignatedCostThe path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.8 | ||||||||||||
| xstInstancePortDesignatedBridgeThe bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.9 | ||||||||||||
| xstInstancePortDesignatedPortThe port identifier of the port on the designated bridge for this port's segment. | OctetString Constraints: range: 2-2 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.10 | ||||||||||||
| xstInstancePortForwardTransitionsThe number of times this port has transitioned from the learning state to the forwarding state. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.11 | ||||||||||||
| xstInstancePortPortRoleThe role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the bridge to the root bridge (i.e., root port) (3) The port … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.12 | ||||||||||||
| xstInstancePortAdminPathCostThe admin value of the MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster me… | Integer32r/w Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.13 | ||||||||||||
| xstInstancePortOperPathCostThe oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attac… | Integer32 Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.8.2.1.1.5.6.5.1.14 |
mstInstanceEditTable
table.1.3.6.1.4.1.259.8.2.1.1.5.6.6
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mstInstanceEditTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mstInstanceEditTable'
The instance table for the Multiple Spanning Tree region
A conceptual row containing the status of the MSTP instance.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mstInstanceEditIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.1 |
| mstInstanceEditVlansMapA string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.2 |
| mstInstanceEditVlansMap2kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.3 |
| mstInstanceEditVlansMap3kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.4 |
| mstInstanceEditVlansMap4kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.5 |
| mstInstanceEditRemainingHopsThe remaining hop count for this MST instance. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.5.6.6.1.6 |
mstInstanceOperTable
table.1.3.6.1.4.1.259.8.2.1.1.5.6.7
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mstInstanceOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mstInstanceOperTable'
The Multiple Spanning Tree region instance vlan mapped table.
A conceptual row containing the status of the MSTP instance.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mstInstanceOperIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.1 |
| mstInstanceOperVlansMapA string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.2 |
| mstInstanceOperVlansMap2kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.3 |
| mstInstanceOperVlansMap3kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.4 |
| mstInstanceOperVlansMap4kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.8.2.1.1.5.6.7.1.5 |
.1.3.6.1.4.1.259.8.2.1.1.5.7
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk staLoopbackDetectionPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::staLoopbackDetectionPortTable'
A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk
A conceptual row of staLoopbackDetectionPortTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| staLoopbackDetectionPortIfIndexThe port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.5.7.1.1 | ||||
| staLoopbackDetectionPortStatusStatus of the port on whether spanning tree loopback detection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.7.1.2 | ||||
| staLoopbackDetectionPortTrapStatusThe parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.7.1.3 | ||||
| staLoopbackDetectionPortReleaseModeSetting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicates that this port can be released from discarding state manu… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.7.1.4 | ||||
| staLoopbackDetectionPortReleaseSet this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.5.7.1.5 |
mirrorTable
table.1.3.6.1.4.1.259.8.2.1.1.8.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mirrorTable'
Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be used as either source or destination ports.
The conceptual row of mirrorTable.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| mirrorDestinationPortThe destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.8.1.1.1 | ||||||
| mirrorSourcePortThe source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.8.1.1.2 | ||||||
| mirrorTypeIf this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.8.1.1.3 | ||||||
| mirrorStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.8.1.1.4 |
.1.3.6.1.4.1.259.8.2.1.1.9.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopRouterCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopRouterCurrentTable'
Table for current router ports.
Entry for current router ports.
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopRouterCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopR… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.8.1.1 |
| igmpSnoopRouterCurrentPortsThe set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.8.2.1.1.9.8.1.2 |
| igmpSnoopRouterCurrentStatusThe set of ports which are static router ports. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.8.2.1.1.9.8.1.3 |
.1.3.6.1.4.1.259.8.2.1.1.9.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopRouterStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopRouterStaticTable'
Table for static router ports.
Entry for static router ports.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopRouterStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopR… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.9.1.1 | ||||
| igmpSnoopRouterStaticPortsThe set of ports which are static router ports. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.8.2.1.1.9.9.1.2 | ||||
| igmpSnoopRouterStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.9.1.3 |
.1.3.6.1.4.1.259.8.2.1.1.9.10
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopMulticastCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopMulticastCurrentTable'
Table for current multicast addresses.
Entry for current multicast addresses.
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopMulticastCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopM… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.10.1.1 |
| igmpSnoopMulticastCurrentIpAddressIP address of multicast group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.9.10.1.2 |
| igmpSnoopMulticastCurrentPortsThe set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.8.2.1.1.9.10.1.3 |
| igmpSnoopMulticastCurrentStatusThe set of ports which are static members. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.8.2.1.1.9.10.1.4 |
.1.3.6.1.4.1.259.8.2.1.1.9.11
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopMulticastStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopMulticastStaticTable'
Table for static multicast addresses.
Entry for static multicast addresses.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopMulticastStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopM… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.11.1.1 | ||||
| igmpSnoopMulticastStaticIpAddressIP address of multicast group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.9.11.1.2 | ||||
| igmpSnoopMulticastStaticPortsThe set of ports which are members. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.8.2.1.1.9.11.1.3 | ||||
| igmpSnoopMulticastStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.11.1.4 |
.1.3.6.1.4.1.259.8.2.1.1.9.14
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopCurrentVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopCurrentVlanTable'
Table for enabling or disabling IGMP snooping per VLAN.
Entry for enabling or disabling IGMP snooping.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopCurrentVlanIndexSame is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.14.1.1 | ||||
| igmpSnoopCurrentVlanImmediateLeaveThe parameter to enable or disable the Immediate-Leave feature on this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.14.1.3 |
igmpSnoopProfileTable
table.1.3.6.1.4.1.259.8.2.1.1.9.18
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopProfileTable'
The table for configuring the IGMP snooping profile.
The entry for configuring the IGMP snooping profile.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopProfileIdThe ID of the IGMP snooping profile. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.18.1.1 | ||||
| igmpSnoopProfileActionThe access mode of the IGMP snooping profile. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.18.1.2 | ||||
| igmpSnoopProfileStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.18.1.3 |
.1.3.6.1.4.1.259.8.2.1.1.9.20
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopProfileRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopProfileRangeTable'
The table for configuring the range of the IGMP snooping profile.
The entry for configuring the range of the IGMP snooping profile.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| igmpSnoopProfileRangeProfileIdThis is defined as igmpSnoopProfileId. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.20.1.1 | ||||||||||||||
| igmpSnoopProfileRangeInetAddressTypeThe address type is associated with this agent. Only ipv4(1) type is supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.20.1.2 | ||||||||||||||
| igmpSnoopProfileRangeStartInetAddressThe specified addresses in the start of the controlled IP multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.8.2.1.1.9.20.1.3 | ||||||||||||||
| igmpSnoopProfileRangeEndInetAddressThe specified addresses in the end of the controlled IP multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.8.2.1.1.9.20.1.4 | ||||||||||||||
| igmpSnoopProfileRangeActionThe access mode of the IGMP snooping profile. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.20.1.5 |
igmpSnoopFilterPortTable
table.1.3.6.1.4.1.259.8.2.1.1.9.21
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopFilterPortTable'
Table for port configuration in IGMP filtering.
Entry for port configuration in IGMP filtering.
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopFilterPortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.21.1.1 |
| igmpSnoopFilterPortProfileIdThe igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.9.21.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.9.22
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopThrottlePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::igmpSnoopThrottlePortTable'
Table for port configuration in IGMP throttling.
Entry for port configuration in IGMP throttling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopThrottlePortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.9.22.1.1 | ||||
| igmpSnoopThrottlePortRunningStatusDescribes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) indicates the IGMP throttling mechanism is inactive. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.9.22.1.2 | ||||
| igmpSnoopThrottlePortActionThe action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and the number of current joined multicast groups is equal to t… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.9.22.1.3 | ||||
| igmpSnoopThrottlePortMaxGroupsThe maximum number of IGMP groups that the interface can join. | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.8.2.1.1.9.22.1.4 | ||||
| igmpSnoopThrottlePortCurrentGroupsThe current number of IGMP groups that the interface has joined. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.9.22.1.5 |
netConfigTable
table.1.3.6.1.4.1.259.8.2.1.1.10.1
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk netConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::netConfigTable'
A table of netConfigEntry.
A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresp…
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresp…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| netConfigIfIndexThe VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.10.1.1.1 | ||||||||||||
| netConfigIPAddressThe IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.10.1.1.2 | ||||||||||||
| netConfigSubnetMaskThe subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure o… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.10.1.1.3 | ||||||||||||
| netConfigPrimaryInterfaceWhether this is a primary interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.10.1.1.4 | ||||||||||||
| netConfigUnnumberedWhether this is an unnumbered interface. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.10.1.1.5 | ||||||||||||
| netConfigStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.10.1.1.6 |
vlanTable
table.1.3.6.1.4.1.259.8.2.1.1.12.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::vlanTable'
Table for VLAN configuration.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| vlanIndexBased on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.12.1.1.1 | ||||||
| vlanAddressMethodMethod to get the IP address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.12.1.1.2 |
vlanPortTable
table.1.3.6.1.4.1.259.8.2.1.1.12.2
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::vlanPortTable'
Table for port configuration in VLAN.
Entry for port configuration in VLAN.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| vlanPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRID… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.12.2.1.1 | ||||||
| vlanPortModeThis variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to dot1q-tunnel(4) sets a 802.1Q tunnel link. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.12.2.1.2 | ||||||
| vlanPortDot1qEtherTypetpid for 802.1Q encapsulation. Used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. | Unsigned32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.12.2.1.4 | ||||||
| vlanPortDot1qAddressMonitorModeWhether address monitor for SBC mamnagment VLANs is enabled for this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.12.2.1.5 |
.1.3.6.1.4.1.259.8.2.1.1.12.16
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanL2ProtocolTunnelPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::vlanL2ProtocolTunnelPortTable'
Table for port configuration in Layer 2 Protocol Tunneling.
Entry for port configuration in Layer 2 Protocol
Tunneling.
Tunneling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanL2ptPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.12.16.1.1 | ||||
| vlanL2ptPortStaSet enabled(1) to enable Layer 2 protocol tunneling for spanning-tree protocol. Set disabled(2) to disable Layer 2 protocol tunneling for spanning-tree protocol. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.12.16.1.2 | ||||
| vlanL2ptPortCdpSet enabled(1) to enable Layer 2 protocol tunneling for Cisco Discovery Protocol. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco Discovery Protocol. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.12.16.1.4 | ||||
| vlanL2ptPortVtpSet enabled(1) to enable Layer 2 protocol tunneling for Cisco VTP. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco VTP. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.12.16.1.5 | ||||
| vlanL2ptPortPvstSet enabled(1) to enable Layer 2 protocol tunneling for Cisco PVST+. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco PVST+. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.12.16.1.6 |
prioIpPrecTable
table.1.3.6.1.4.1.259.8.2.1.1.13.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioIpPrecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::prioIpPrecTable'
Table for IP precedence priority mapping.
Entry for IP precedence priority mapping.
Indexes
| Column | Syntax | OID |
|---|---|---|
| prioIpPrecPortThe port or the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.13.2.1.2 |
| prioIpPrecValueValue of IP ToS Precedence as specified in the packet header. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.13.2.1.3 |
| prioIpPrecCosClass of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this CoS. This CoS is then further mapped to the hardware queue a… | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.13.2.1.4 |
prioIpDscpTable
table.1.3.6.1.4.1.259.8.2.1.1.13.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioIpDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::prioIpDscpTable'
Table for IP DSCP priority mapping.
Entry for IP DSCP priority mapping.
Indexes
| Column | Syntax | OID |
|---|---|---|
| prioIpDscpPortThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.13.4.1.1 |
| prioIpDscpValueValue of IP DSCP as specified in the packet header. | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.259.8.2.1.1.13.4.1.2 |
| prioIpDscpCosClass of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hard… | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.13.4.1.3 |
prioIpPortTable
table.1.3.6.1.4.1.259.8.2.1.1.13.7
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioIpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::prioIpPortTable'
Table for IP port priority mapping.
Entry for IP port priority mapping.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| prioIpPortPhysPortThe port or the trunk (excluding trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.13.7.1.1 | ||||
| prioIpPortValueIP port for this value. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.259.8.2.1.1.13.7.1.2 | ||||
| prioIpPortCosClass of service for this entry. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.13.7.1.3 | ||||
| prioIpPortStatusWriting this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.13.7.1.4 |
prioWrrPortTable
table.1.3.6.1.4.1.259.8.2.1.1.13.12
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioWrrPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::prioWrrPortTable'
Table for per port weighted round robin (WRR).
Entry for per port weighted round robin (WRR).
| Column | Syntax | OID |
|---|---|---|
| prioWrrPortIfIndexThe port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.13.12.1.1 |
| prioWrrPortTrafficClassTraffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.13.12.1.2 |
| prioWrrPortWeightWeight for this entry. | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.8.2.1.1.13.12.1.3 |
trapDestTable
table.1.3.6.1.4.1.259.8.2.1.1.14.1
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk trapDestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::trapDestTable'
A list of trap destination entries.
A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.
the community string, and SNMP version to use when sending
a trap.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| trapDestAddressThe address to send traps. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.14.1.1.1 | ||||
| trapDestCommunityA community to which this destination address belongs. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.259.8.2.1.1.14.1.1.2 | ||||
| trapDestStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.14.1.1.3 | ||||
| trapDestVersionDetermines the version of the trap that is to be sent to the trap receiver. If the value is 1, then an SNMP version 1 trap is sent and if the value is 2, an SNMP version 2 trap is sent. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.14.1.1.4 | ||||
| trapDestUdpPortDetermines the UDP port number that the trap will be sent to. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.8.2.1.1.14.1.1.5 |
rateLimitPortTable
table.1.3.6.1.4.1.259.8.2.1.1.16.1.2
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk rateLimitPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::rateLimitPortTable'
Table for rate limit of each port.
Entry for rate limit of each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| rlPortIndexThe port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.1 | ||||
| rlPortInputStatusWhether input rate limit is enabled for this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.6 | ||||
| rlPortOutputStatusWhether output rate limit is enabled for this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.7 | ||||
| rlPortInputLimitInKiloValue of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. For a 10 Gbps port, the range is 64 to 10000000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.10 | ||||
| rlPortOutputLimitInKiloValue of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. For a 10 Gbps port, the range is 64 to 10000000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.16.1.2.1.11 |
rateLimitCosPrioTable
table.1.3.6.1.4.1.259.8.2.1.1.16.1.5
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk rateLimitCosPrioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::rateLimitCosPrioTable'
Table for the rate limit, per port, per Class of Service priority.
Entry for the rate limit, per port, per Class of Service priority.
| Column | Syntax | OID |
|---|---|---|
| rateLimitCosPrioIfIndexThe port that the rate limit function is performed. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.1 |
| rateLimitCosPrioValueThe Class of Service priority value. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.2 |
| rateLimitCosPrioRateLimitValueThe rate limit value of the Class of Service priority. If the value equals 0, it means that the rate limit function is disabled. | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.16.1.5.1.3 |
markerTable
table.1.3.6.1.4.1.259.8.2.1.1.16.2.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk markerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::markerTable'
The marker table.
Entry for marker table.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| markerIfIndexThe interface index of the marker table. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.1 | ||||||||||||
| markerAclNameThe name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.2 | ||||||||||||
| markerActionBitListThe marker action bit list, in right to left order. for example: 0x3(11 in binary) means dscp(0) and precedence(1) 0x4(100 in binary) means priority(2). | Bitsr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.3 | ||||||||||||
| markerDscpThe DSCP value of the marker entry. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.4 | ||||||||||||
| markerPrecedenceThe precedence value of the marker entry. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.5 | ||||||||||||
| markerPriorityThe priority value of the marker entry. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.6 | ||||||||||||
| markerStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.16.2.1.1.7 |
prioAclToCosMappingTable
table.1.3.6.1.4.1.259.8.2.1.1.16.3.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioAclToCosMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::prioAclToCosMappingTable'
Table for ACL to CoS Mapping.
Entry for ACL to CoS Mapping.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| prioAclToCosMappingIfIndexThe port interface of the prioAclToCosMappingEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.1 | ||||||||||||
| prioAclToCosMappingAclNameThe name of an IP ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.2 | ||||||||||||
| prioAclToCosMappingCosValueCoS value of the prioAclToCosMappingTable. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.3 | ||||||||||||
| prioAclToCosMappingStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.16.3.1.1.4 |
diffServClfrExtTable
table.1.3.6.1.4.1.259.8.2.1.1.16.4.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServClfrExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::diffServClfrExtTable'
The conceptual table of diffServClfrExtEntry.
The conceptual row for diffServClfrExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| diffServClfrExtNameThe policy-map name. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.8.2.1.1.16.4.1.1.1 |
| diffServClfrExtDescThe description of policy-map. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.8.2.1.1.16.4.1.1.2 |
diffServClassMapTable
table.1.3.6.1.4.1.259.8.2.1.1.16.4.3
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServClassMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::diffServClassMapTable'
The conceptual table of diffServClassMapEntry.
The conceptual row for diffServClassMapTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServClassMapIdAn index that enumerates the Class Map entries. Managers obtain new values for row creation in this table by reading diffServClassMapNextFree. | DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.1 | ||||||||||||
| diffServClassMapNameThe class-map name. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.2 | ||||||||||||
| diffServClassMapDescThe description of class-map. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.3 | ||||||||||||
| diffServClassMapTypeThe class-map type. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.4 | ||||||||||||
| diffServCalssMapStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.16.4.3.1.5 |
.1.3.6.1.4.1.259.8.2.1.1.16.4.5
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServClassMapElementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::diffServClassMapElementTable'
The conceptual table of diffServClassMapElementEntry.
The conceptual row for diffServClassMapElementTable.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServClassMapElementIdAn index that enumerates the Class Map Element entries. Managers obtain new values for row creation in this table by reading diffServClfrElementNextFree. | DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.1 | ||||||||||||
| diffServClassMapElementSpecificA pointer to a valid entry in another table, filter table, that describes the applicable classification parameters. This RowPointer should point to an instance of one of: diffServMultiFieldClfrEntry, dif… | SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable… | .1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.2 | ||||||||||||
| diffServClassMapElementStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.16.4.5.1.3 |
.1.3.6.1.4.1.259.8.2.1.1.16.4.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServMultiFieldClfrExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::diffServMultiFieldClfrExtTable'
The conceptual table of diffServMultiFieldClfrExtEntry.
The conceptual row for diffServMultiFieldClfrExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| diffServMultiFieldClfrExtTypeIndicates the current type of the multi filed entry. This is a bit-map of possible conditions. The various bit positions are: 0: dscp. 1: ipPrecedence. 2: vid | Bitsr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.1 | ||||||
| diffServMultiFieldClfrExtVidThe VLAN ID to match against the packet's VLAN ID. | Q-BRIDGE-MIBVlanIndexr/w | .1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.2 | ||||||
| diffServMultiFieldClfrExtIpPrecedenceThe IP precedence value to match against the packet's IP precedence value. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.16.4.6.1.3 |
diffServToSMarkActTable
table.1.3.6.1.4.1.259.8.2.1.1.16.4.7
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServToSMarkActTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::diffServToSMarkActTable'
The conceptual table of diffServToSMarkActEntry.
The conceptual row for diffServToSMarkActTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| diffServToSMarkActToSThe ToS value referenced by a diffServActionSpecific attribute. | Integer32 Constraints: range: 0-32 | .1.3.6.1.4.1.259.8.2.1.1.16.4.7.1.1 |
.1.3.6.1.4.1.259.8.2.1.1.16.4.8
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServDot1pMarkActTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::diffServDot1pMarkActTable'
The conceptual table of diffServDot1pMarkActEntry.
The conceptual row for diffServDot1pMarkActTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| diffServDot1pMarkActDot1pThe Dot1p value referenced by a diffServActionSpecific attribute. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.16.4.8.1.1 |
vlanBasedPrioTable
table.1.3.6.1.4.1.259.8.2.1.1.16.5.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanBasedPrioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::vlanBasedPrioTable'
Table for vlan based priority.
Entry for vlan based priority.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanBasedPrioIfindexThe specified port or trunk for vlan based priority. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.1 | ||||
| vlanBasedPrioVlanIndexThe vlan which this port joins in. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.2 | ||||
| vlanBasedPrioPriorityThe priority of the specified vlan traffic. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.3 | ||||
| vlanBasedPrioStatusThe status of the vlan based entry. Valid(1) means the entry is existent. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.16.5.1.1.4 |
portSecPortTable
table.1.3.6.1.4.1.259.8.2.1.1.17.2.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portSecPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::portSecPortTable'
The port security(MAC binding) Table.
The entry of portSecPortTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| portSecPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.1 | ||||||||
| portSecPortStatusSet enabled(1) to enable port security and set disabled(2) to disable port security. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.2 | ||||||||
| portSecActionThe corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will b… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.3 | ||||||||
| portSecMaxMacCountThe maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the n… | Integer32r/w Constraints: range: 0-1024 | .1.3.6.1.4.1.259.8.2.1.1.17.2.1.1.4 |
radiusServerTable
table.1.3.6.1.4.1.259.8.2.1.1.17.4.7
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk radiusServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::radiusServerTable'
The table for RADIUS server.
The conceptual row for radiusServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| radiusServerIndexThe RADIUS server index in the table. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.1 | ||||
| radiusServerAddressIP address of a RADIUS server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.2 | ||||
| radiusServerAuthPortNumberAuthentication port number of RADIUS server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.3 | ||||
| radiusServerAcctPortNumberAccounting port number of RADIUS server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.4 | ||||
| radiusServerKeyKey for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. | OctetStringr/w Constraints: range: 0-48 | .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.5 | ||||
| radiusServerRetransmitTimeout for RADIUS. | Integer32r/w Constraints: range: 1-30 | .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.6 | ||||
| radiusServerTimeoutTimeout for RADIUS. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.7 | ||||
| radiusServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.4.7.1.8 |
tacacsPlusServerTable
table.1.3.6.1.4.1.259.8.2.1.1.17.5.4
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk tacacsPlusServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::tacacsPlusServerTable'
The table for TACACS+ server.
The conceptual row for tacacsPlusServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| tacacsPlusServerIndexTACACS+ server index. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.1 | ||||
| tacacsPlusServerAddressIP address of a TACACS+ server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.2 | ||||
| tacacsPlusServerPortNumberTCP port number of a TACACS+ server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.3 | ||||
| tacacsPlusServerKeyThe encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string. | OctetStringr/w Constraints: range: 0-48 | .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.4 | ||||
| tacacsPlusServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.8 | ||||
| tacacsPlusServerRetransmitThe maximum number of retransmissions for TACACS+. | Integer32r/w Constraints: range: 1-30 | .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.9 | ||||
| tacacsPlusServerTimeoutTimeout for TACACS+. | secondsInteger32r/w Constraints: range: 1-540 | .1.3.6.1.4.1.259.8.2.1.1.17.5.4.1.10 |
sshConnInfoTable
table.1.3.6.1.4.1.259.8.2.1.1.17.6.6
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sshConnInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::sshConnInfoTable'
The table for Secure Shell Connection.
The conceptual row for sshConnInfoTable.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| sshConnIDThe connection ID of the Secure Shell Connection. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.1 | ||||||
| sshConnMajorVersionThe SSH major version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.2 | ||||||
| sshConnMinorVersionThe SSH minor version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.3 | ||||||
| sshConnStatusThe SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start Sta… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.5 | ||||||
| sshConnUserNameThe user name of the connection. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.6 | ||||||
| sshDisconnectSet the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.7 | ||||||
| sshConnEncryptionTypeStrThe encryption type of the SSH. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.259.8.2.1.1.17.6.6.1.8 |
sshUserTable
table.1.3.6.1.4.1.259.8.2.1.1.17.6.29
·
1 row entry
·
18 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sshUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::sshUserTable'
The conceptual table of all of sshUserEntry.
The conceptual row for sshUserTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| sshUserNameUser Name. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.1 | ||||||||
| sshUserRsaKey1The RSA user key segment 1. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.2 | ||||||||
| sshUserRsaKey2The RSA user key segment 2. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.3 | ||||||||
| sshUserRsaKey3The RSA user key segment 3. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.4 | ||||||||
| sshUserRsaKey4The RSA user key segment 4. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.5 | ||||||||
| sshUserRsaKey5The RSA user key segment 5. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.6 | ||||||||
| sshUserRsaKey6The RSA user key segment 6. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.7 | ||||||||
| sshUserRsaKey7The RSA user key segment 7. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.8 | ||||||||
| sshUserRsaKey8The RSA user key segment 8. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.9 | ||||||||
| sshUserDsaKey1The DSA user key segment 1. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.10 | ||||||||
| sshUserDsaKey2The DSA user key segment 2. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.11 | ||||||||
| sshUserDsaKey3The DSA user key segment 3. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.12 | ||||||||
| sshUserDsaKey4The DSA user key segment 4. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.13 | ||||||||
| sshUserDsaKey5The DSA user key segment 5. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.14 | ||||||||
| sshUserDsaKey6The DSA user key segment 6. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.15 | ||||||||
| sshUserDsaKey7The DSA user key segment 7. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.16 | ||||||||
| sshUserDsaKey8The DSA user key segment 8. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.17 | ||||||||
| sshUserKeyDelActionTo delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA an… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.6.29.1.18 |
aclIpAceTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.1
·
1 row entry
·
23 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclIpAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclIpAceTable'
The conceptual table of all of aclIpAceEntry.
The conceptual row for aclIpAceTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| aclIpAceNameThe name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.1 | ||||||||||||
| aclIpAceIndexThe unique index of an ACE within an ACL. | Integer32 Constraints: range: 1-32 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.2 | ||||||||||||
| aclIpAcePrecedenceSpecifies the IP precedence value to be matched against. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1). | Integer32 Constraints: range: 0-32 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.3 | ||||||||||||
| aclIpAceActionIndicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, aclIpAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.4 | ||||||||||||
| aclIpAceSourceIpAddrThe specified source IP address. The packet's source address is AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be conf… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.5 | ||||||||||||
| aclIpAceSourceIpAddrBitmaskThe specified source IP address mask. The packet's destination address is AND-ed with the value of aclIpAceSourceIpAddr and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.6 | ||||||||||||
| aclIpAceDestIpAddrThe specified destination IP address. The packet's destination address is AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.7 | ||||||||||||
| aclIpAceDestIpAddrBitmaskThe specified destination IP address mask. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.8 | ||||||||||||
| aclIpAceProtocolThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. The object=256, means 'any' For exa… | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.9 | ||||||||||||
| aclIpAcePrecSpecifies the IP precedence value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value of this object is ignored whenever the value of aclIpAceP… | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.10 | ||||||||||||
| aclIpAceTosSpecifies the IP ToS facility value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value of this object is ignored whenever the value of aclIpAc… | Integer32r/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.11 | ||||||||||||
| aclIpAceDscpSpecifies the DSCP value to be matched against. This object cannot be configured when the status of the entry, aclIpAceStatus, is active(1). The value of this object is ignored whenever the value of aclIpAcePrec obje… | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.12 | ||||||||||||
| aclIpAceSourcePortOpIndicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.13 | ||||||||||||
| aclIpAceMinSourcePortIf the aclIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.14 | ||||||||||||
| aclIpAceMaxSourcePortIf the aclIpAceSourcePortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.15 | ||||||||||||
| aclIpAceSourcePortBitmaskIf the aclIpAceSourcePortOp is equal(2), this indicates the bitmask of the aclIpAceMinSourcePort. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.16 | ||||||||||||
| aclIpAceDestPortOpIndicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.17 | ||||||||||||
| aclIpAceMinDestPortIf the aclIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.18 | ||||||||||||
| aclIpAceMaxDestPortIf the aclIpAceDestPortOp is range(3), this indicates the upper bound of the TCP/UDP port number value range. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.19 | ||||||||||||
| aclIpAceDestPortBitmaskIf the aclIpAceDestPortOp is equal(2), this indicates the bitmask of the aclIpAceMinDestPort. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.20 | ||||||||||||
| aclIpAceControlCodeIndicates how the control flags of TCP packets are to be compared. aceIpControlCode is AND-ed with aceIpControlCodeBitmask. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.21 | ||||||||||||
| aclIpAceControlCodeBitmaskIndicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.22 | ||||||||||||
| aclIpAceStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.17.7.1.1.23 |
aclMacAceTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.2
·
1 row entry
·
16 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclMacAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclMacAceTable'
The conceptual table of all of aclMacAceEntry.
The conceptual row for aclMacAceTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| aclMacAceNameThe name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.1 | ||||||||||||
| aclMacAceIndexThe unique index of an ACE within an ACL. | Integer32 Constraints: range: 1-32 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.2 | ||||||||||||
| aclMacAcePrecedenceSpecifies the entry's precedence. | Integer32 Constraints: range: 0-32 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.3 | ||||||||||||
| aclMacAceActionIndicates the action to be taken if a packet matches this ACE. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.4 | ||||||||||||
| aclMacAcePktformatUsed to check the packet format of the packets. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.5 | ||||||||||||
| aclMacAceSourceMacAddrIndicates the 48-bit destination MAC address. The specified source MAC of the packet The packet's source MAC address is AND-ed with the value of aceMacSourceMacAddrBitmask and then compared against the value of this … | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.6 | ||||||||||||
| aclMacAceSourceMacAddrBitmaskThe specified source MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.7 | ||||||||||||
| aclMacAceDestMacAddrIndicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of aceMacDestMacAddrBitmask and then compared against the value … | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.8 | ||||||||||||
| aclMacAceDestMacAddrBitmaskThe specified destination MAC address mask. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.9 | ||||||||||||
| aclMacAceVidOpIndicates how a packet's vid is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.10 | ||||||||||||
| aclMacAceMinVidIndicates the lower bound of the vid value range if the aclMacAceVidOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | Integer32r/w Constraints: range: 1-4093 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.11 | ||||||||||||
| aclMacAceVidBitmaskThe bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff. | Integer32r/w Constraints: range: 0-4095 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.12 | ||||||||||||
| aclMacAceEtherTypeOpIndicates how a packet's ethertype is to be compared. This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.14 | ||||||||||||
| aclMacAceEtherTypeBitmaskThe bitmask of vid if the aclMacAceVidOp is equal(2) , default value is 0xFFFF. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.15 | ||||||||||||
| aclMacAceMinEtherTypeIndicates the lower bound of the vid value range if the aclMacAceEtherTypeOp is range(3). This object cannot be configured when the status of the entry, aclMacAceStatus, is active(1). | Integer32r/w Constraints: range: 1536-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.16 | ||||||||||||
| aclMacAceStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.17.7.2.1.18 |
aclAclGroupTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.3
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclAclGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclAclGroupTable'
The conceptual table of aclAclGroupEntry.
The conceptual row for aclAclGroupTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| aclAclGroupIfIndexThe interface number specifying the ACL binding to. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.1 |
| aclAclGroupIngressIpAclSpecifies the ingress IP ACL(standard or extended) binding to the interface. | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.2 |
| aclAclGroupEgressIpAclSpecifies the egress IP ACL(standard or extended) binding to the interface. | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.3 |
| aclAclGroupIngressMacAclSpecifies the ingress MAC ACL binding to the interface. | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.4 |
| aclAclGroupEgressMacAclSpecifies the egress MAC ACL binding to the interface. | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.17.7.3.1.5 |
aclIngressIpMaskTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.4
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclIngressIpMaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclIngressIpMaskTable'
The conceptual table of aclIngressIpMaskEntry.
The conceptual row for aclIngressIpMaskTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| aclIngressIpMaskIndexIndicates the bitmask of the source IP address. The relative bitmask must be created before the ACE binds to the interface. This object cannot be configured when the status of the entry, aclIngressIpMaskStatus, is act… | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.1 | ||||||||||||
| aclIngressIpMaskPrecedenceIndicates whether to check the IP precedence against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured … | Integer32 Constraints: range: 0-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.2 | ||||||||||||
| aclIngressIpMaskIsEnableTosIndicates whether to check the IP ToS facility against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of t… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.3 | ||||||||||||
| aclIngressIpMaskIsEnableDscpIndicates whether to check the IP DSCP against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the ent… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.4 | ||||||||||||
| aclIngressIpMaskIsEnablePrecedenceIndicates whether to check the IP precednce against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of th… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.5 | ||||||||||||
| aclIngressIpMaskIsEnableProtocolIndicates whether to check the IP protocol against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.6 | ||||||||||||
| aclIngressIpMaskSourceIpAddrBitmaskIndicates the source IP bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of th… | Unsigned32r/w Constraints: range: 0-4294967295 | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.7 | ||||||||||||
| aclIngressIpMaskDestIpAddrBitmaskIndicates the destination IP bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of… | Unsigned32r/w Constraints: range: 0-4294967295 | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.8 | ||||||||||||
| aclIngressIpMaskSourcePortBitmaskIndicates the source port bitmask to check against the TCP/UDP packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.9 | ||||||||||||
| aclIngressIpMaskDestPortBitmaskIndicates the destination port bitmask to check against the TCP/UDP packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the s… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.10 | ||||||||||||
| aclIngressIpMaskControlCodeBitmaskIndicates the control code bitmask to check against the TCP packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.11 | ||||||||||||
| aclIngressIpMaskStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.17.7.4.1.12 |
aclEgressIpMaskTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.5
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclEgressIpMaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclEgressIpMaskTable'
The conceptual table of aclEgressIpMaskEntry.
The conceptual row for aclEgressIpMaskTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| aclEgressIpMaskIndexThe index of a mask entry within a mask table. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.1 | ||||||||||||
| aclEgressIpMaskPrecedenceThe created precedence of an mask entry within the mask table. | Integer32 Constraints: range: 0-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.2 | ||||||||||||
| aclEgressIpMaskIsEnableTosIndicates whether to check the IP ToS facility against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status of th… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.3 | ||||||||||||
| aclEgressIpMaskIsEnableDscpIndicates whether to check the IP DSCP against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status of the entr… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.4 | ||||||||||||
| aclEgressIpMaskIsEnablePrecedenceIndicates whether to check the IP precedence against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status of the … | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.5 | ||||||||||||
| aclEgressIpMaskIsEnableProtocolIndicates whether to check the IP protocol against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status of the e… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.6 | ||||||||||||
| aclEgressIpMaskSourceIpAddrBitmaskIndicates the source IP bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status of the ent… | Unsigned32r/w Constraints: range: 0-4294967295 | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.7 | ||||||||||||
| aclEgressIpMaskDestIpAddrBitmaskIndicates the destination IP bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status of th… | Unsigned32r/w Constraints: range: 0-4294967295 | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.8 | ||||||||||||
| aclEgressIpMaskSourcePortBitmaskIndicates the source port bitmask to check against the TCP/UDP packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status … | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.9 | ||||||||||||
| aclEgressIpMaskDestPortBitmaskIndicates the destination port bitmask to check against the TCP/UDP packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the s… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.10 | ||||||||||||
| aclEgressIpMaskControlCodeBitmaskIndicates the control code bitmask to check against the TCP packets. The relative bitmask must be created before the ACE binds to the interface in egress direction. This object cannot be configured when the status of … | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.11 | ||||||||||||
| aclEgressIpMaskStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.17.7.5.1.12 |
aclIngressMacMaskTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.6
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclIngressMacMaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclIngressMacMaskTable'
The conceptual table of aclIngressMacMaskEntry.
The conceptual row for aclIngressMacMaskTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| aclIngressMacMaskIndexThe index of an mask entry within an ingress mask table. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.1 | ||||||||||||
| aclIngressMacMaskPrecedenceThe created order of an mask entry within an ingress mask table. | Integer32 Constraints: range: 0-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.2 | ||||||||||||
| aclIngressMacMaskSourceMacAddrBitmaskIndicates the source MAC bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.3 | ||||||||||||
| aclIngressMacMaskDestMacAddrBitmaskIndicates the destination MAC bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.4 | ||||||||||||
| aclIngressMacMaskVidBitmaskIndicates the vid bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the entry,… | Integer32r/w Constraints: range: 0-4095 | .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.5 | ||||||||||||
| aclIngressMacMaskEtherTypeBitmaskIndicates the ethertype bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the … | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.6 | ||||||||||||
| aclIngressMacMaskIsEnablePktformatIndicates whether to check the packet format against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of t… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.7 | ||||||||||||
| aclIngressMacMaskStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.17.7.6.1.8 |
aclEgressMacMaskTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.7
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclEgressMacMaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclEgressMacMaskTable'
The conceptual table of aclEgressMacMaskEntry.
The conceptual row for aclEgressMacMaskTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| aclEgressMacMaskIndexThe index of a mask entry within an egress mask table. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.1 | ||||||||||||
| aclEgressMacMaskPrecedenceThe created precedence of a mask entry within an egress mask table. | Integer32 Constraints: range: 0-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.2 | ||||||||||||
| aclEgressMacMaskSourceMacAddrBitmaskIndicates the source MAC bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the … | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.3 | ||||||||||||
| aclEgressMacMaskDestMacAddrBitmaskIndicates the destination MAC bitmask to check against the packets, The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of … | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.4 | ||||||||||||
| aclEgressMacMaskVidBitmaskIndicates the vid bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the entry,… | Integer32r/w Constraints: range: 0-4095 | .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.5 | ||||||||||||
| aclEgressMacMaskEtherTypeBitmaskIndicates the ethertype bitmask to check against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of the e… | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.6 | ||||||||||||
| aclEgressMacMaskIsEnablePktformatIndicates whether to check the packet format against the packets. The relative bitmask must be created before the ACE binds to the interface in ingress direction. This object cannot be configured when the status of t… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.7 | ||||||||||||
| aclEgressMacMaskStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.17.7.7.1.8 |
aclIpTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.8
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclIpTable'
The conceptual table of all of aclIpEntry.
The conceptual row for aclIpTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| aclIpAclNameThe name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.8.1.1 |
aclMacTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.9
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclMacTable'
The conceptual table of all of aclMacEntry.
The conceptual row for aclMacTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| aclMacAclNameThe name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.9.1.1 |
aclArpAceTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.10
·
1 row entry
·
15 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclArpAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclArpAceTable'
The conceptual table of all of aclArpAceEntry.
The conceptual row for aclArpAceTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| aclArpAceNameThe name of an ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.1 | ||||||||||||
| aclArpAceIndexThe unique index of an ACE within an ACL. | Integer32 Constraints: range: 1-32 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.2 | ||||||||||||
| aclArpAcePrecedenceSpecifies the ARP precedence value to be matched. This object cannot not be configured when the status of the entry, aclArpAceStatus, is active(1). | Integer32 Constraints: range: 0-32 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.3 | ||||||||||||
| aclArpAceActionIndicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, aclArpAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.4 | ||||||||||||
| aclArpAcePktTypeIndicates the packet type to be taken if a packet matches this ACE. This object can not be configured when the status of the entry, aclArpAceStatus, is active(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.5 | ||||||||||||
| aclArpAceSourceIpAddrThe specified source ARP address. The packet's source address is AND'ed with the value of aclArpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be configured when the status… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.6 | ||||||||||||
| aclArpAceSourceIpAddrBitmaskThe specified source ARP address mask. The packet's destination address is AND'ed with the value of aclArpAceSourceIpAddr and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.7 | ||||||||||||
| aclArpAceDestIpAddrThe specified destination IP address. The packet's destination address is AND'ed with the value of aclArpAceDestIpAddrBitmask and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.8 | ||||||||||||
| aclArpAceDestIpAddrBitmaskThe specified destination IP address mask. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.9 | ||||||||||||
| aclArpAceSourceMacAddrIndicates the 48-bit destination MAC address. The specified source MAC of the packet. The packet's source MAC address is AND'ed with the value of aceArpSourceMacAddrBitmask and then compared against the value of this ob… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.10 | ||||||||||||
| aclArpAceSourceMacAddrBitmaskThe specified source MAC address mask. This object cannot be configured when the status of the entry, aclArpAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.11 | ||||||||||||
| aclArpAceDestMacAddrIndicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND'ed with the value of aceArpDestMacAddrBitmask and then compared against the value of… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.12 | ||||||||||||
| aclArpAceDestMacAddrBitmaskThe specified destination MAC address mask. This object cannot be configured when the status of the entry, aclArpAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.13 | ||||||||||||
| aclArpAceLogStatusIndicates whether to log messages against the packets. This object cannot be configured when the status of the entry, aclArpAceStatus, is active(1). | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.14 | ||||||||||||
| aclArpAceStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.17.7.10.1.15 |
aclArpTable
table.1.3.6.1.4.1.259.8.2.1.1.17.7.11
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aclArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aclArpTable'
The conceptual table of all of aclArpEntry.
The conceptual row for aclArpTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| aclArpAclNameThe name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.17.7.11.1.1 |
ipFilterSnmpTable
table.1.3.6.1.4.1.259.8.2.1.1.17.9.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterSnmpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::ipFilterSnmpTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through SNMP.
will allow to connect to this device through SNMP.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ipFilterSnmpStartAddressThe start IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.1 | ||||
| ipFilterSnmpEndAddressThe end IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.2 | ||||
| ipFilterSnmpStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.9.1.1.3 |
ipFilterHTTPTable
table.1.3.6.1.4.1.259.8.2.1.1.17.9.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterHTTPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::ipFilterHTTPTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through HTTP.
will allow to connect to this device through HTTP.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ipFilterHTTPStartAddressThe start IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.1 | ||||
| ipFilterHTTPEndAddressThe end IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.2 | ||||
| ipFilterHTTPStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.9.2.1.3 |
ipFilterTelnetTable
table.1.3.6.1.4.1.259.8.2.1.1.17.9.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterTelnetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::ipFilterTelnetTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow them to connect to this device through Telnet.
will allow them to connect to this device through Telnet.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ipFilterTelnetStartAddressThe start IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.1 | ||||
| ipFilterTelnetEndAddressThe end IP address. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.2 | ||||
| ipFilterTelnetStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.9.3.1.3 |
dot1xAuthConfigExtTable
table.1.3.6.1.4.1.259.8.2.1.1.17.11.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dot1xAuthConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dot1xAuthConfigExtTable'
The extension table of dot1xAuthConfigTable.
The entry of dot1xAuthConfigExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| dot1xAuthConfigExtOperModeThe operation mode of dot1x port which allows host connection to 802.1x-authorized ports. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.11.1.1.1 | ||||||
| dot1xAuthConfigExtMultiHostMaxCntThe maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. | Integer32r/w Constraints: range: 1-1024 | .1.3.6.1.4.1.259.8.2.1.1.17.11.1.1.2 |
aaaMethodTable
table.1.3.6.1.4.1.259.8.2.1.1.17.12.1
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaMethodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aaaMethodTable'
Contains the settings needed for accounting.
A conceptual row in the aaaMethodTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaMethodIndexSpecifies the index for the entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.1 | ||||
| aaaMethodNameName for the method. | OctetStringr/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.2 | ||||
| aaaMethodGroupNameName for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. | OctetStringr/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.3 | ||||
| aaaMethodModestart-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting record is sent in the background. The requested user process b… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.4 | ||||
| aaaMethodStatusSet to 1 to initiate the aaaMethodTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.5 | ||||
| aaaMethodClientTypedot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console; commands(3): Provides accounting service for command privileges. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.12.1.1.6 |
aaaRadiusGroupTable
table.1.3.6.1.4.1.259.8.2.1.1.17.12.2
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaRadiusGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aaaRadiusGroupTable'
Uses a subset of RADIUS servers for accounting as defined by the server group
A conceptual row of aaaRadiusGroupEntry.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaRadiusGroupIndexSpecifies the index for the entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.1 | ||||
| aaaRadiusGroupServerBitMapIdentifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.2 | ||||
| aaaRadiusGroupNameUses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.3 | ||||
| aaaRadiusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.12.2.1.4 |
aaaTacacsPlusGroupTable
table.1.3.6.1.4.1.259.8.2.1.1.17.12.3
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaTacacsPlusGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aaaTacacsPlusGroupTable'
Uses a subset of TACACS+ servers for accounting as defined by the server group
A conceptual row of aaaTacacsPlusGroupEntry.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaTacacsPlusGroupIndexSpecifies the index for the entry. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.1 | ||||
| aaaTacacsPlusGroupServerBitMapIdentifies which TACACS+ sever to use. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.2 | ||||
| aaaTacacsPlusGroupNameUses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.3 | ||||
| aaaTacacsPlusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.12.3.1.4 |
aaaAccountTable
table.1.3.6.1.4.1.259.8.2.1.1.17.12.5
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaAccountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aaaAccountTable'
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
A conceptual row of aaaAccountTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaAccountIfIndexDefined as the ifIndex | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.1 | ||||
| aaaAccountMethodNameSpecifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.2 | ||||
| aaaAccountProtocolGet the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.3 | ||||
| aaaAccountStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.12.5.1.4 |
aaaAccExecTable
table.1.3.6.1.4.1.259.8.2.1.1.17.12.9
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaAccExecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::aaaAccExecTable'
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
A conceptual row of aaaAccExecTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaAccExecIndexThe method of accessing CLI management. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.17.12.9.1.1 | ||||
| aaaAccExecMethodNameSpecifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.8.2.1.1.17.12.9.1.2 |
remoteLogServerTable
table.1.3.6.1.4.1.259.8.2.1.1.19.6.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteLogServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteLogServerTable'
A Table for storing the remote log Server list.
A conceptually row for remoteLogServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteLogServerIpThe IP address of the remote log Server. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.19.6.4.1.1 | ||||
| remoteLogServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.19.6.4.1.2 |
smtpServerIpTable
table.1.3.6.1.4.1.259.8.2.1.1.19.7.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk smtpServerIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::smtpServerIpTable'
The SMTP server IP table. The maximum servers to be added is 3.
A conceptual row of the smtpServerIpTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| smtpServerIpSMTP mail server's IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.19.7.4.1.1 | ||||
| smtpServerIpStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.19.7.4.1.2 |
smtpDestEMailTable
table.1.3.6.1.4.1.259.8.2.1.1.19.7.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk smtpDestEMailTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::smtpDestEMailTable'
The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5.
A conceptual row of the smtpDestEMailTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| smtpDestEMailSMTP destination e-mail address. | OctetString Constraints: range: 0-41 | .1.3.6.1.4.1.259.8.2.1.1.19.7.5.1.1 | ||||
| smtpDestEMailStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.19.7.5.1.2 |
sntpServerTable
table.1.3.6.1.4.1.259.8.2.1.1.23.1.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sntpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::sntpServerTable'
Table for SNTP servers
Entry for SNTP servers.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sntpServerIndexThe index of a server. This table has fixed size. | Integer32 Constraints: range: 1-3 | .1.3.6.1.4.1.259.8.2.1.1.23.1.4.1.1 |
| sntpServerIpAddressThe IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index are 0. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.23.1.4.1.2 |
ntpServerTable
table.1.3.6.1.4.1.259.8.2.1.1.23.5.5
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ntpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::ntpServerTable'
Table for NTP servers
Entry for NTP servers.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| ntpServerIpAddressThe IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.1 | ||||||
| ntpServerVersionNTP version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.2 | ||||||
| ntpServerKeyIdKey for a NTP server. This variable can only be written. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.3 | ||||||
| ntpServerStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates tha… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.23.5.5.1.4 |
ntpAuthKeyTable
table.1.3.6.1.4.1.259.8.2.1.1.23.5.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ntpAuthKeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::ntpAuthKeyTable'
Table for NTP Authentication keys
Entry for NTP Authentication keys.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| ntpAuthKeyIdThe index of a Authentication key. This table has fixed size. | Integer32 Constraints: range: 1-65536 | .1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.1 | ||||||
| ntpAuthKeyWordThe Authentication key word is used to created a key by the MD5 And the max length is 32. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.2 | ||||||
| ntpAuthKeyStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates tha… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.23.5.6.1.3 |
fileCopyOamResultTable
table.1.3.6.1.4.1.259.8.2.1.1.24.1.15.2
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk fileCopyOamResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::fileCopyOamResultTable'
Table for OAM remote firmware upgrade result.
A result entry for OAM remote firmware upgrade.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| fileCopyOamLocalIfIndexThe ifIndex value of the port excluding trunk. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1.1 | ||||||||||||||||||||||||
| fileCopyOamResultThe status of the last firmware upgrade procedure. This object will have a value of oamStatusUnknown(2) if no firmware upgrade operation has been performed. The oamSuccess(1) indicates that the remote fir… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.24.1.15.2.1.2 |
fileInfoTable
table.1.3.6.1.4.1.259.8.2.1.1.24.2.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk fileInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::fileInfoTable'
This table contain the information of the file system; we can also perform the delete, set startup file operation.
A conceptually row for fileInfoTable.
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| fileInfoUnitIDThe switch unit in a stacking system, in a non-stacking system, this value is always 1. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.1 | ||||||||||||||||||
| fileInfoFileNameThe file Name of the file System in the device. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.2 | ||||||||||||||||||
| fileInfoFileTypeThe file type of the file System in the device. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.3 | ||||||||||||||||||
| fileInfoIsStartUpThis flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.4 | ||||||||||||||||||
| fileInfoFileSizeThe sizes( in bytes) of the file. | bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.5 | ||||||||||||||||||
| fileInfoCreationTimeThe creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A singl… | OctetString Constraints: range: 20-20 | .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.6 | ||||||||||||||||||
| fileInfoDeleteWrite this object to delete(2) to delete a file, when read, this always return noDelete(1). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.24.2.1.1.7 |
.1.3.6.1.4.1.259.8.2.1.1.24.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk fileAutoDownloadResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::fileAutoDownloadResultTable'
This table contains file auto download result information.
A conceptual row for fileAutoDownloadResultTable.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| fileAutoDownloadResultUnitIDThe switch unit in a stacking system, in a non-stacking system, this value is always 1. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.24.3.1.1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| fileAutoDownloadResultActionThe status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be obtained if no auto download action is currently processing. … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.24.3.1.2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| fileAutoDownloadResultStatusThe last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. | FileCopyStatus Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.24.3.1.3 |
dnsHostTable
table.1.3.6.1.4.1.259.8.2.1.1.26.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dnsHostTable'
This table is used to define static host name-to-address mapping.
A conceptual row for the dnsHostTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| dnsHostNameThe DNS Host name. | OctetString Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.26.3.1.1 |
| dnsHostIndexThe secondary index of this dnsHostTable, representing the sequence of the dnsHostIp. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.8.2.1.1.26.3.1.2 |
| dnsHostIpThe DNS Host IP. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.26.3.1.3 |
dnsAliasTable
table.1.3.6.1.4.1.259.8.2.1.1.26.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsAliasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dnsAliasTable'
This table displays the alias of the host name.
A conceptual row for the dnsAliasTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| dnsAliasNameHost name. | OctetString Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.26.4.1.1 |
| dnaAliasAliasAlias. | OctetString Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.26.4.1.2 |
dnsDomainListTable
table.1.3.6.1.4.1.259.8.2.1.1.26.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsDomainListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dnsDomainListTable'
This table defines a list of default domain names to complete unqualified host names.
A conceptual row for the dnsDomainListTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dnsDomainListNameDomain name. | OctetString Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.26.5.1.1 | ||||
| dnsDomainListStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.26.5.1.2 |
dnsNameServerTable
table.1.3.6.1.4.1.259.8.2.1.1.26.6
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsNameServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dnsNameServerTable'
To specify the address of one or more name servers to use for name and address resolution. This table has fixed size, will get 0.0.0.0 dnsNameServerIp if this entry is not existed.
A conceptual row for dnsNameServerTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| dnsNameServerIndexIndex of this dnsNameServerTable, representing the sequence of the dnsNameServerIp. | Integer32 Constraints: range: 1-6 | .1.3.6.1.4.1.259.8.2.1.1.26.6.1.1 |
| dnsNameServerIpIP address of name server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.26.6.1.2 |
dnsCacheTable
table.1.3.6.1.4.1.259.8.2.1.1.26.7
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dnsCacheTable'
To display the RRs in DNS cache.
A conceptual row for the dnsCacheTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dnsCacheIndexThe entry sequence number. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.26.7.1.1 | ||||
| dnsCacheFlagAlways get 4, means this record is unreliable. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.26.7.1.2 | ||||
| dnsCacheTypeCache Type: address(1); cname(2). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.26.7.1.3 | ||||
| dnsCacheIpThe DNS cache IP. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.26.7.1.4 | ||||
| dnsCacheTtlThe DNS cache TTL. | Integer32 Constraints: range: 0-876000 | .1.3.6.1.4.1.259.8.2.1.1.26.7.1.5 | ||||
| dnsCacheDomainThe DNS cache domain. | OctetString Constraints: range: 1-64 | .1.3.6.1.4.1.259.8.2.1.1.26.7.1.6 |
mcastStormTable
table.1.3.6.1.4.1.259.8.2.1.1.33.1.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mcastStormTable'
Table to manage the control of multicast storms for ports.
The conceptual row of multiStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mcastStormIfIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.1 | ||||
| mcastStormStatusWhether multicast storm protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.2 | ||||
| mcastStormPktRateMulticast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.1.1.1.4 |
bcastStormTable
table.1.3.6.1.4.1.259.8.2.1.1.33.3.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk bcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::bcastStormTable'
Table to manage the control of broadcast storms for ports.
The conceptual row of bcastStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| bcastStormIfIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.1 | ||||
| bcastStormStatusWhether broadcast storm protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.2 | ||||
| bcastStormPktRateBroadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. For a 10 Gbps port, the range is 1042 to 262143. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.3.1.1.4 |
unknownUcastStormTable
table.1.3.6.1.4.1.259.8.2.1.1.33.4.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk unknownUcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::unknownUcastStormTable'
Table to manage the unknown unicast storm control.
The conceptual row of unknownUcastStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| unknownUcastStormIfIndexThe port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.1 | ||||
| unknownUcastStormStatusThe parameter indicates that the unknown unicast storm protection is enabled/disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.2 | ||||
| unknownUcastStormSampleTypeThe parameter indicates which storm protection mode is used. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.3 | ||||
| unknownUcastStormPktRateThe parameter indicates the packet rate of the storm protection. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.4.1.1.4 |
atcBcastStormTable
table.1.3.6.1.4.1.259.8.2.1.1.33.5.3
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk atcBcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::atcBcastStormTable'
The table contains the Auto Traffic Control configuration and the status for broadcast traffic.
The conceptual row of the table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| atcBcastStormIfIndexThe specified port on which the ATC is applied. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.1 | ||||
| atcBcastStormEnableThe parameter indicates whether the ATC of the broadcast traffic is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.2 | ||||
| atcBcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature of ATC is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.3 | ||||
| atcBcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.4 | ||||
| atcBcastStormCurrentTrafficRateThe parameter indicates the current broadcast traffic rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.5 | ||||
| atcBcastStormAlarmFireThresholdThe parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. The unit of the parameter is 1K and the value must be greater than or equal to the at… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.6 | ||||
| atcBcastStormAlarmClearThresholdThe parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. The unit of the parameter is 1K and the value must be less than or equal to th… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.7 | ||||
| atcBcastStormTcActionThe parameter indicates the protecting action which ATC will applied to the specified port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.8 | ||||
| atcBcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has to be sent when the broadcast storm has been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.9 | ||||
| atcBcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.10 | ||||
| atcBcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is activated. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.11 | ||||
| atcBcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is released. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.3.1.12 |
atcMcastStormTable
table.1.3.6.1.4.1.259.8.2.1.1.33.5.6
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk atcMcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::atcMcastStormTable'
The table contains the Auto Traffic Control configuration and the status for mulicast traffic.
The conceptual row of the table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| atcMcastStormIfIndexThe specified port on which the ATC is applied. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.1 | ||||
| atcMcastStormEnableThe parameter indicates whether the ATC of the mulicast traffic is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.2 | ||||
| atcMcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature of ATC is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.3 | ||||
| atcMcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.4 | ||||
| atcMcastStormCurrentTrafficRateThe parameter indicates the current mulicast traffic rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.5 | ||||
| atcMcastStormAlarmFireThresholdThe parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. The unit of the parameter is 1K and the value must be greater than or equal to the atcM… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.6 | ||||
| atcMcastStormAlarmClearThresholdThe parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. The unit of the parameter is 1K and the value must be less than or equal to the … | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.7 | ||||
| atcMcastStormTcActionThe parameter indicates the protecting action which ATC will applied to the specified port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.8 | ||||
| atcMcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has to be sent when the mulicast storm has been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.9 | ||||
| atcMcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.10 | ||||
| atcMcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is activated. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.11 | ||||
| atcMcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is released. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.33.5.6.1.12 |
mvrGroupTable
table.1.3.6.1.4.1.259.8.2.1.1.44.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mvrGroupTable'
The table for configuring the MVR group.
The entry for configuring the MVR group.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrGroupIdThe multicast address of the MVR group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.44.6.1.1 | ||||
| mvrGroutActiveTo indicate if the group has a member or not. If there are no members, the status is inactive(2); otherwise the status is active(1). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.44.6.1.2 | ||||
| mvrGroupStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.44.6.1.3 |
mvrGroupStaticTable
table.1.3.6.1.4.1.259.8.2.1.1.44.7
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrGroupStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mvrGroupStaticTable'
The table for configuring the static members of the MVR group.
The entry for configuring the static members of the
MVR group.
MVR group.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrGroupStaticAddressThe multicast address of the MVR group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.44.7.1.1 | ||||
| mvrGroupStaticPortsThe set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.8.2.1.1.44.7.1.2 | ||||
| mvrGroupStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.44.7.1.3 |
mvrGroupCurrentTable
table.1.3.6.1.4.1.259.8.2.1.1.44.8
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrGroupCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mvrGroupCurrentTable'
The table for the current members of the MVR group.
The entry for the current members of the MVR group.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvrGroupCurrentAddressThe multicast address of the MVR group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.44.8.1.1 |
| mvrGroupCurrentPortsThe complete set of ports currently associated with this MVR group. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.8.2.1.1.44.8.1.2 |
mvrPortTable
table.1.3.6.1.4.1.259.8.2.1.1.44.9
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::mvrPortTable'
The table for configuring the MVR port.
The entry for configuring the MVR port.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| mvrIfIndexThe port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.44.9.1.1 | ||||||
| mvrPortTypeFor configuring the MVR port type. To disable the MVR port type, use the none(0). | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.44.9.1.2 | ||||||
| mvrPortImmediateLeaveTo enable immediate leave on MVR port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.44.9.1.3 | ||||||
| mvrPortActiveTo indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.44.9.1.4 |
.1.3.6.1.4.1.259.8.2.1.1.45.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk egressPacketBlockUnknownMcastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::egressPacketBlockUnknownMcastTable'
Table to manage the control of unknown multicast egress packet block for ports.
The conceptual row of egressPacketBlockUnknownMcastTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| egressPacketBlockUnknownMcastIfIndexThe port and the trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.45.1.1.1 | ||||
| egressPacketBlockUnknownMcastStatusWhether unknown multicast egress packet block protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.45.1.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.45.2
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk egressPacketBlockUnknownUcastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::egressPacketBlockUnknownUcastTable'
Table to manage the control of unknown unicast egress packet block for ports.
The conceptual row of unknownUcastTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| egressPacketBlockUnknownUcastIfIndexThe port and the trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.45.2.1.1 | ||||
| egressPacketBlockUnknownUcastStatusWhether unknown unicast egress packet block protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.45.2.1.2 |
dhcpSnoopVlanConfigTable
table.1.3.6.1.4.1.259.8.2.1.1.46.2.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dhcpSnoopVlanConfigTable'
A table contains DHCP Snooping configurations of existing VLANs.
An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.
or disable DHCP Snooping at each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpSnoopVlanIndexThis object indicates the VLAN ID on which DHCP Snooping feature is configured. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.8.2.1.1.46.2.1.1.1 | ||||
| dhcpSnoopVlanEnableThis object indicates whether DHCP Snooping is enabled in this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.46.2.1.1.2 |
dhcpSnoopPortConfigTable
table.1.3.6.1.4.1.259.8.2.1.1.46.3.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dhcpSnoopPortConfigTable'
A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose.
An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose.
trust state of each port or trunk for DHCP Snooping purpose.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpSnoopPortIfIndexThe ifIndex value of the port or trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.46.3.1.1.1 | ||||
| dhcpSnoopPortTrustEnableThis object indicates whether the port or trunk is trusted for DHCP Snooping purpose. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.46.3.1.1.2 |
dhcpSnoopBindingsTable
table.1.3.6.1.4.1.259.8.2.1.1.46.4.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopBindingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::dhcpSnoopBindingsTable'
A table contains the DHCP bindings information learnt by the device.
An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.
IP address, VLAN number, interface number, leased time and
status.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpSnoopBindingsVlanIndexThis object indicates the VLAN which a DHCP client host belongs to. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.1 | ||||||||||||||
| dhcpSnoopBindingsMacAddressThis object indicates the MAC address of a DHCP client host. | TOKEN-RING-RMON-MIBMacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.2 | ||||||||||||||
| dhcpSnoopBindingsAddrTypeThis object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.3 | ||||||||||||||
| dhcpSnoopBindingsEntryTypeThis object indicates that this binding is obtained from dynamically learning or is a static configuraion. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.4 | ||||||||||||||
| dhcpSnoopBindingsIpAddressThis object indicates the allocated IP address of a DHCP client host. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.5 | ||||||||||||||
| dhcpSnoopBindingsPortIfIndexThis object indicates the port or trunk where a DHCP client host connects to. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.6 | ||||||||||||||
| dhcpSnoopBindingsLeaseTimeThis object indicates the leased time of this DHCP bindings. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.46.4.1.1.7 |
clusterCandidateTable
table.1.3.6.1.4.1.259.8.2.1.1.47.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk clusterCandidateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::clusterCandidateTable'
A table listing cluster candidates.
A conceptual row containing the information of the candidate.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| clusterCandidateMacAddrThe MAC address of the candidate. | TOKEN-RING-RMON-MIBMacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.259.8.2.1.1.47.9.1.1 | ||||||
| clusterCandidateDescThe description of the candidate. | OctetString Constraints: range: 0-42 | .1.3.6.1.4.1.259.8.2.1.1.47.9.1.3 | ||||||
| clusterCandidateRoleThe role of the candidate. candidate(2) : The switch is discovered by the commander, but it has not been manually configured for access from the commander. activeMember(3) : Th… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.47.9.1.4 |
clusterMemberTable
table.1.3.6.1.4.1.259.8.2.1.1.47.10
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk clusterMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::clusterMemberTable'
A table listing clustering members.
A conceptual row containing the information of the member.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| clusterMemberIdThe ID of the member. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.47.10.1.1 | ||||
| clusterMemberMacAddrThe MAC address of the member. | TOKEN-RING-RMON-MIBMacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.259.8.2.1.1.47.10.1.2 | ||||
| clusterMemberDescThe description of the member. | OctetString Constraints: range: 0-42 | .1.3.6.1.4.1.259.8.2.1.1.47.10.1.3 | ||||
| clusterMemberActiveThe active status of the member. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMember(4): The switch is… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.47.10.1.4 |
ipSrcGuardConfigTable
table.1.3.6.1.4.1.259.8.2.1.1.48.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipSrcGuardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::ipSrcGuardConfigTable'
A table contains the configurations to enable or disable IP Source Guard at each port or trunk.
An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk.
or disable IP Source Guard at each port or trunk.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| ipSrcGuardPortIfIndexThis object idents the port or trunk which is capable of IP Source Guard feature. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.48.1.1.1 | ||||||
| ipSrcGuardModeThis object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1, it means Ip Source Guard is enabled, and packets are filte… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.48.1.1.2 |
ipSrcGuardAddrTable
table.1.3.6.1.4.1.259.8.2.1.1.48.2
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipSrcGuardAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::ipSrcGuardAddrTable'
A table contains the IP Source Guard bindings information learnt by the device.
An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.
IP address, VLAN number, interface number, leased time and
status.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ipSrcGuardBindingsVlanIndexThis object indicates the VLAN which a DHCP client host belongs to. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.8.2.1.1.48.2.1.1 | ||||||||||||||
| ipSrcGuardBindingsMacAddressThis object indicates the MAC address of a DHCP client host. | TOKEN-RING-RMON-MIBMacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.259.8.2.1.1.48.2.1.2 | ||||||||||||||
| ipSrcGuardBindingsAddrTypeThis object indicates the type of IP address denoted in ipSrcGuardBindingsIpAddress type. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.48.2.1.3 | ||||||||||||||
| ipSrcGuardBindingsEntryTypeThis object indicates that this binding is obtained from dynamically learning or is a static configuraion. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.48.2.1.4 | ||||||||||||||
| ipSrcGuardBindingsIpAddressThis object indicates the allocated IP address of a DHCP client host. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.48.2.1.5 | ||||||||||||||
| ipSrcGuardBindingsPortIfIndexThis object indicates the port or trunk where a DHCP client host connects to. | IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.48.2.1.6 | ||||||||||||||
| ipSrcGuardBindingsLeaseTimeThis object indicates the leased time of this DHCP bindings. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.48.2.1.7 | ||||||||||||||
| ipSrcGuardBindingsStatusThe status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is a… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.48.2.1.8 |
oamPortStatusTable
table.1.3.6.1.4.1.259.8.2.1.1.52.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk oamPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::oamPortStatusTable'
A table contains the status of OAM at each port.
An entry contains the status of OAM at each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| oamPortIfIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.52.1.1.1 | ||||
| oamEnableStatusThis object configures the status of OAM at each port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.52.1.1.2 |
oamPortModeTable
table.1.3.6.1.4.1.259.8.2.1.1.52.2
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk oamPortModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::oamPortModeTable'
A table contains the mode of OAM at each port.
An entry contains the mode of OAM at each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| oamPortModeIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.52.2.1.1 | ||||
| oamPortModeThis object configures the mode of OAM at each port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.52.2.1.2 |
oamPortClearStatTable
table.1.3.6.1.4.1.259.8.2.1.1.52.3
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk oamPortClearStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::oamPortClearStatTable'
A table contains the information of clear OAM statistics at each port.
An entry contains the information of clear OAM statistics
at each port.
at each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| oamPortClearStatIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.52.3.1.1 | ||||
| oamClearStatisticsThis variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when reading this variable. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.52.3.1.2 |
oamLoopbackTable
table.1.3.6.1.4.1.259.8.2.1.1.52.4
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk oamLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::oamLoopbackTable'
Table for OAM remote loopback test.
Entry for OAM remote loopback test.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| oamLoopbackTestIfIndexThe ifIndex value of the port(excluding trunk). The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.52.4.1.1 | ||||
| oamLoopbackTestPacketNumberSetting the packet number when performing loopback test. | Integer32r/w Constraints: range: 1-99999999 | .1.3.6.1.4.1.259.8.2.1.1.52.4.1.2 | ||||
| oamLoopbackTestPacketSizeSetting the packet size when performing loopback test. | Integer32r/w Constraints: range: 64-1518 | .1.3.6.1.4.1.259.8.2.1.1.52.4.1.3 | ||||
| oamLoopbackTestActionSetting this object to test(2) to begin the loopback test. This object will be noTest(1) when the loopback test is canceled or the loopback test has finished. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.52.4.1.4 | ||||
| oamLoopbackTestResultTxA count of the the total number of loopback frames transmitted at last loopback test on this interface. | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.52.4.1.5 | ||||
| oamLoopbackTestResultRxA count of the the total number of loopback frames received at last loopback test on this interface. | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.52.4.1.6 |
.1.3.6.1.4.1.259.8.2.1.1.53.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteAcceptableFrameTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteAcceptableFrameTypeTable'
A table that contains the acceptable frame type configuration at the specified remote device.
An entry that contains the acceptable frame type
configuration at the specified remote device.
configuration at the specified remote device.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| remoteAcceptableFrameTypeIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.1.1.1 | ||||||
| remoteAcceptableFrameTypeThis object configures the acceptable frame types at the specified remote device. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.1.1.2 |
remoteEepromWriteTable
table.1.3.6.1.4.1.259.8.2.1.1.53.2
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteEepromWriteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteEepromWriteTable'
A table contains the information of whether EEPROM is writable at the specified remote device.
An entry that contains the information of whether EEPROM
is writable at the specified remote device.
is writable at the specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteEepromWriteIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.2.1.1 | ||||
| remoteEepromWriteEnableStatusThe object configures the status of EEPROM at the specified remote device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.2.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.53.3
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteFlowControlEnbaleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteFlowControlEnbaleTable'
A table contains the flow control configuation at the specified remote device.
An entry that contains the flow control configuration
at the specified remote device.
at the specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteFLIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.3.1.1 | ||||
| remoteFlowControlEnbaleThe object configures the status of flow control at the specified remote device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.3.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.53.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteNegotiationEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteNegotiationEnableTable'
A table contains the auto-negotiation configuration at the specified remote device.
An entry contains the auto-negotiation configuration
at the specified remote device.
at the specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteNegoIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.4.1.1 | ||||
| remoteNegotiationEnableThe object configures the status of auto negotiation at the specified remote device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.4.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.53.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteShutDownEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteShutDownEnableTable'
A table contains the information of whether shutdown process is enabled at the specified remote device.
An entry contains the information of whether shutdown
process is enabled at the specified remote device.
process is enabled at the specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteSDIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.5.1.1 | ||||
| remoteShutDownEnableEnable or disable the remote ShutDown. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.5.1.2 |
remoteInputToSwitchTable
table.1.3.6.1.4.1.259.8.2.1.1.53.6
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteInputToSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteInputToSwitchTable'
A table contains the information of whether the input is tagged or untagged at the specified remote device.
An entry contains the information of whether the input
is tagged or untagged at the specified remote device.
is tagged or untagged at the specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteInputIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.6.1.1 | ||||
| remoteInputToSwitchThe object configures the packet format of input at the specified remote device. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.6.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.53.7
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteOutputToSubscriberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteOutputToSubscriberTable'
A table contains the information of whether output to subscriber is tagged or untagged at the specified remote device.
An entry contains the information of whether output to
subscriber is tagged or untagged at the specified remote
device.
subscriber is tagged or untagged at the specified remote
device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteOutputIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.7.1.1 | ||||
| remoteOutputToSubscriberThe object configures the packet format of output to subscriber at the specified remote device. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.7.1.2 |
remoteSpeedDuplexTable
table.1.3.6.1.4.1.259.8.2.1.1.53.8
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteSpeedDuplexTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteSpeedDuplexTable'
A table contains the speed-duplex configuration at the specified remote device.
An entry contains the speed-duplex configuration at the
specified remote device.
specified remote device.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| remoteSpeedDuplexIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.8.1.1 | ||||||||||
| remoteSpeedDuplexThe object configures the speed-duplex at the specified remote device. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.8.1.2 |
remoteMdixTable
table.1.3.6.1.4.1.259.8.2.1.1.53.9
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMdixTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMdixTable'
A table contains the MDIX configuration at the specified remote device.
An entry contains the MDIX configuration at the specified
remote device.
remote device.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| remoteMdixIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.9.1.1 | ||||||
| remoteMdixThe object configures the MDIX at the specified remote device. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.9.1.2 |
remoteDefaultTable
table.1.3.6.1.4.1.259.8.2.1.1.53.10
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteDefaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteDefaultTable'
A table contains the information of default VLAN and priority at the specified remote device.
An entry contains the information of default VLAN and
priority at the specified remote device.
priority at the specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteDefaultIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.10.1.1 | ||||
| remoteDefaultVlanThe object configures the default VLAN at the specified remote device. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.10.1.2 | ||||
| remoteDefaultPriorityThe object configures the default priority at the remote specified device. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.10.1.3 | ||||
| remoteDefaultEnableThe object is to take effect default VLAN and priority at the remote specified device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.10.1.4 |
remoteProtocolVlanTable
table.1.3.6.1.4.1.259.8.2.1.1.53.11
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteProtocolVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteProtocolVlanTable'
A table contains the information of protocal VLAN at the remote specified device.
An entry contains the information of protocal VLAN at the
specified remote device.
specified remote device.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| remoteProtocolVlanIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.11.1.1 | ||||||||||||
| remoteProtocolVlanEtherTypeThe object configures the Ether type at the specified remote device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.11.1.2 | ||||||||||||
| remoteProtocolVlanVidThe vlan of each port. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.11.1.3 | ||||||||||||
| remoteProtocolVlanPrirityThe object configures the VLAN ID at the specified remote device. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.11.1.4 | ||||||||||||
| remoteProtocolVlanRowStatusThe status of this conceptual row entry. This object is issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indica… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.53.11.1.5 |
remoteQueueCosMapTable
table.1.3.6.1.4.1.259.8.2.1.1.53.12
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteQueueCosMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteQueueCosMapTable'
A table contains the information of queue number and priority of CoS map at the specified remote device.
An entry contains the information of queue number and
priority of CoS map at the specified remote device.
priority of CoS map at the specified remote device.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteQueueCosMapIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.12.1.1 | ||||
| remoteQueueCosMapPriorityThe object configures the priority at the specified remote device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.12.1.2 | ||||
| remoteQueueCosMapQueueThe object configures the queue number of CoS map at the specified remote device. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.12.1.3 | ||||
| remoteQueueCosMapEnableThe object is to take effect the queue Cos map setting at the remote device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.12.1.4 |
remoteQueueModeTable
table.1.3.6.1.4.1.259.8.2.1.1.53.13.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteQueueModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteQueueModeTable'
A table contains the information of queue mode at the specified remote device.
An entry contains the information of queue mode at the
specified remote device.
specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteQueueModeIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.13.1.1.1 | ||||
| remoteQueueModeThe object configures the queue mode at the specified remote device. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.13.1.1.2 |
remoteWrrPortTable
table.1.3.6.1.4.1.259.8.2.1.1.53.13.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteWrrPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteWrrPortTable'
A table contains the information of the weighted round robin (WRR) at the specified remote device.
An entry contains the information of the WRR at the
specified remote device.
specified remote device.
| Column | Syntax | OID |
|---|---|---|
| remoteWrrPortIfIndexThis object shows the ifIndex value of the port excluding trunk. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.1 |
| remoteWrrPortQueueIDThe object configures the queue ID of WRR at the specified remote device. | Integer32 Constraints: range: 0-3 | .1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.2 |
| remoteWrrPortWeightThe object configures the weight of WRR at the specified remote device. | Integer32r/w Constraints: range: 1-15 | .1.3.6.1.4.1.259.8.2.1.1.53.13.2.1.3 |
.1.3.6.1.4.1.259.8.2.1.1.53.14.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMapTagPriStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMapTagPriStatusTable'
A table contains the status of tag-priority map at the specified remote device.
An entry contains the status of tag-priority map at the
specified remote device.
specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteMapTagPriStatusIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.14.1.1.1 | ||||
| remoteMapTagPriStatusThe object configures the status of tap-priority map at the specified remote device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.14.1.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.53.14.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMapTagPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMapTagPriorityTable'
A table contains the information of tag-priority map at the specified remote device.
An entry contains the information of tag-priority map at
the specified remote device.
the specified remote device.
| Column | Syntax | OID |
|---|---|---|
| remoteMapTagPriorityIndexThis object shows the ifIndex value of the port excluding trunk. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.1 |
| remoteMapTagPriorityThe object shows the tap-priority map at the specified remote device. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.2 |
| remoteMapTagPriorityPriThe object configures the priority of tap-priority map at the specified remote device. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.53.14.2.1.3 |
remoteMapTosStatusTable
table.1.3.6.1.4.1.259.8.2.1.1.53.15.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMapTosStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMapTosStatusTable'
A table contains the status of ToS map at the specified remote device.
An entry contains the status of ToS map at the specified
remote device.
remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteMapTosStatusIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.15.1.1.1 | ||||
| remoteMapTosEnableStatusThe object configures the status of ToS map at the specified remote device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.15.1.1.2 |
remoteMapTosTable
table.1.3.6.1.4.1.259.8.2.1.1.53.15.2
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMapTosTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMapTosTable'
A table contains the information of ToS map at the specified remote device.
An entry contains the information of the TOS map at the
remote device.
remote device.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| remoteMapTosIndexThis object shows the ifIndex value of the port excluding trunk. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.1 | ||||||||||||
| remoteMapTosThe object shows the ToS map at the specified remote device. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.2 | ||||||||||||
| remoteMapTosPriThe object configures the the priority of ToS map at the specified remote device. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.3 | ||||||||||||
| remoteMapTosStatusThe status of this conceptual row entry. This object is isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indica… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.53.15.2.1.4 |
.1.3.6.1.4.1.259.8.2.1.1.53.16.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMapTrafficClassStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMapTrafficClassStatusTable'
A table contains the status of traffic class map at the specified remote device.
An entry contains the status of traffic class map at the
specified remote device.
specified remote device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteMapTCStatusIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.16.1.1.1 | ||||
| remoteMapTCEnableStatusThe object configures the status of traffic class map at the specified remote device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.16.1.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.53.16.2
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMapTrafficClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMapTrafficClassTable'
A table contains the information of traffic class map at the specified remote device.
An entry contains the information of traffic class map
at the specified remote device.
at the specified remote device.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| remoteMapTrafficClassIfIndexThis object shows the ifIndex value of the port excluding trunk. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.1 | ||||||||||||
| remoteMapTrafficClassThe object shows the traffic class map at the specified remote device. | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.2 | ||||||||||||
| remoteMapCosThe object configures the value of CoS at the specified remote device. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.3 | ||||||||||||
| remoteMapTrafficClassStatusThe status of this conceptual row entry. This object is issued to manage the creation and deletion of conceptual rows. For the following, check the corrections above. - 'active'… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.8.2.1.1.53.16.2.1.4 |
.1.3.6.1.4.1.259.8.2.1.1.53.17
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteFactoryDefaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteFactoryDefaultTable'
A table contains the factory default setting at the specified remote device.
An entry contains the factory default setting at the
specified remote device.
specified remote device.
Indexes
| Column | Syntax | OID | ||
|---|---|---|---|---|
| remoteFactoryDefaultIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.17.1.1 | ||
| remoteFactoryDefaultThis object is to apply the factory default setting at the specified remote device. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.17.1.2 |
.1.3.6.1.4.1.259.8.2.1.1.53.18
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteDeviceStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteDeviceStatisticTable'
A table shows the statistics for each remote device's port.
An entry shows the statistics for each remote device's
port.
port.
| Column | Syntax | OID |
|---|---|---|
| remoteStatisticPortIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.18.1.1 |
| remoteDeviceStatisticIfIndexThis object shows the ifIndex value of the remote device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.18.1.2 |
| remoteTxPausePacketThe total number of pause frames transmitted from the remote device's port. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.18.1.3 |
| remoteRxPausePacketThe total number of pause frames received from the remote device's port. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.18.1.4 |
| remoteRxErrorPacketThe total number of error frames received from the remote device's port. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.18.1.5 |
.1.3.6.1.4.1.259.8.2.1.1.53.19
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteQueuePacketStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteQueuePacketStatisticTable'
A table contains the packet statistics of each queue for the remote device's port.
An entry contains the packet statistics of each queue for
the remote device's port.
the remote device's port.
| Column | Syntax | OID |
|---|---|---|
| remoteQueuePacketStatisticPortIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.19.1.1 |
| remoteQueuePacketDeviceStatisticIfIndexThis object shows the ifIndex value of the specified remote device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.19.1.2 |
| remoteQueuePacketQueueIndexThis object shows the index of packet queue of the specified remote device. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.19.1.3 |
| remoteQueueDropPacketThe total number of packets dropped by the remote device's port. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.19.1.4 |
| remoteQueueForwardingPacketThe total number of packets forwarded by the remote device's port. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.53.19.1.5 |
remoteMacAddressTable
table.1.3.6.1.4.1.259.8.2.1.1.53.20
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteMacAddressTable'
A table contains the MAC address of the specified remote device.
An entry contains the MAC address of the specified remote
device.
device.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteMacAddressIfIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.20.1.1 | ||||
| remoteMacAddressThis object shows the MAC address of the specified remote device. | OctetStringr/w | .1.3.6.1.4.1.259.8.2.1.1.53.20.1.2 | ||||
| remoteMacAddressStatusThis object shows the information of whether the MAC address of the remote device is valided. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.20.1.3 |
remoteAccessPointTable
table.1.3.6.1.4.1.259.8.2.1.1.53.21.3
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteAccessPointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteAccessPointTable'
Contains the access point setting of CPE.
A conceptual row in the remoteAccessPoint table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteAccessPointLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.21.3.1.1 | ||||
| remoteAccessPointStatusSet this to enabled(1) to enable the Wireless Access Point function. Sets disabled(2) to disable the Wireless Access Point function. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.21.3.1.2 |
remoteDhcpServerTable
table.1.3.6.1.4.1.259.8.2.1.1.53.21.4
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteDhcpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteDhcpServerTable'
Contains the DHCP server setting of CPE.
A conceptual row in the remoteDhcpServer table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteDhcpServerLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.1 | ||||
| remoteDhcpServerStatusIf this is enabled(1), the remote device acts as a DHCP server on the LAN side. If this is disabled(2), the remote device does not act as a DHCP server. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.2 | ||||
| remoteDhcpServerIpAddressThe IP address of DHCP server at remote device. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.3 | ||||
| remoteDhcpServerSubnetMaskThe subnet mask of DHCP server at remote device. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.4 | ||||
| remoteDhcpServerGatewayThe IP Address of the default gateway at remote device. If this value is undefined or unknown, it shall have the value 0.0.0.0. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.53.21.4.1.5 |
remoteVlanTable
table.1.3.6.1.4.1.259.8.2.1.1.53.21.5
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remoteVlanTable'
Contains the VLAN settings of CPE.
A conceptual row in the remoteVlan table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remoteVlanLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.1 | ||||
| remoteVlanIdSpecifiies the VLAN ID. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.2 | ||||
| remoteVlanStatusSet valid(1) to create the VLAN. Set invalid(2) to delete the VLAN. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.21.5.1.3 |
remotePortAdminTable
table.1.3.6.1.4.1.259.8.2.1.1.53.22.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remotePortAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remotePortAdminTable'
Contains the admin status of LAN ports on CPE.
A conceptual row in the remotePortAdmin table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remotePortAdminLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.1 | ||||
| remotePortAdminRemotePortThe port interface of remote device. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.2 | ||||
| remotePortAdminStatusIf this is enabled(1), the remote port is in enabled. If this is disabled(2), the remote port is not in enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.22.1.1.3 |
remotePortPvidTable
table.1.3.6.1.4.1.259.8.2.1.1.53.22.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remotePortPvidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remotePortPvidTable'
Contains the VID of LAN ports on CPE.
A conceptual row in the remotePortPvid table.
| Column | Syntax | OID |
|---|---|---|
| remotePortPvidLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.1 |
| remotePortPvidRemotePortThe port interface of remote device. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.2 |
| remotePortPvidSets default VLAN on remote port. | Integer32r/w Constraints: range: 1-4094 | .1.3.6.1.4.1.259.8.2.1.1.53.22.2.1.3 |
remotePortPriorityTable
table.1.3.6.1.4.1.259.8.2.1.1.53.22.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remotePortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remotePortPriorityTable'
Contains the priority of LAN ports on CPE.
A conceptual row in the remotePortPriority table.
| Column | Syntax | OID |
|---|---|---|
| remotePortPriorityLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.1 |
| remotePortPriorityRemotePortThe port interface of remote device. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.2 |
| remotePortPrioritySets default priority on remote port. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.8.2.1.1.53.22.3.1.3 |
.1.3.6.1.4.1.259.8.2.1.1.53.22.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remotePortIgmpSnoopingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remotePortIgmpSnoopingTable'
Contains the IGMP snooping status of LAN ports on CPE.
A conceptual row in the remotePortIgmpSnooping table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remotePortIgmpSnoopingLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.1 | ||||
| remotePortIgmpSnoopingRemotePortThe port interface of remote device. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.2 | ||||
| remotePortIgmpSnoopingIf this is enabled(1), IGMP snooping is enabled on the remote port. If this is disabled(2), IGMP snooping is disabled on the remote port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.53.22.4.1.3 |
remotePortCountersTable
table.1.3.6.1.4.1.259.8.2.1.1.53.22.5
·
1 row entry
·
32 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remotePortCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::remotePortCountersTable'
Contains the information of LAN ports on CPE.
A conceptual row in the remotePortCounters table.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| remotePortCountersLocalPortThe port interface on the switch. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.1 | ||||
| remotePortCountersRemotePortThe port interface of remote device. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.2 | ||||
| remotePortCountersInUnicastSupportedA value of true(1) indicates that supports receiving unicast packet counts. A value of false(2) indicates that not support receiving unicast packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.3 | ||||
| remotePortCountersInUnicastThe total number of unicast packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.4 | ||||
| remotePortCountersInBroadcastSupportedA value of true(1) indicates that supports receiving broadcast packet counts. A value of false(2) indicates that not support receiving broadcast packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.5 | ||||
| remotePortCountersInBroadcastThe total number of broadcasts packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.6 | ||||
| remotePortCountersInPauseSupportedA value of true(1) indicates that supports receiving pause packet counts. A value of false(2) indicates that not support receiving pause packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.7 | ||||
| remotePortCountersInPauseThe total number of pause packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.8 | ||||
| remotePortCountersInMulticastSupportedA value of true(1) indicates that supports receiving multicast packet counts. A value of false(2) indicates that not support receiving multicast packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.9 | ||||
| remotePortCountersInMulticastThe total number of multicasts packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.10 | ||||
| remotePortCountersOutUnicastSupportedA value of true(1) indicates that supports transmitting unicast packet counts. A value of false(2) indicates that not support transmitting unicast packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.11 | ||||
| remotePortCountersOutUnicastThe total number of unicast packets transmitted from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.12 | ||||
| remotePortCountersOutBroadcastSupportedA value of true(1) indicates that supports transmitting broadcast packet counts. A value of false(2) indicates that not support transmitting broadcast packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.13 | ||||
| remotePortCountersOutBroadcastThe total number of broadcast packets transmitted from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.14 | ||||
| remotePortCountersOutMulticastSupportedA value of true(1) indicates that supports transmitting multicast packet counts. A value of false(2) indicates that not support transmitting multicast packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.15 | ||||
| remotePortCountersOutMulticastThe total number of multicast packets transmitted from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.16 | ||||
| remotePortCountersInFcsErrorsSupportedA value of true(1) indicates that supports receiving FCS error packet counts. A value of false(2) indicates that not support receiving FCS error packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.17 | ||||
| remotePortCountersInFcsErrorsThe total number of FCS error packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.18 | ||||
| remotePortCountersOutFcsErrorsSupportedA value of true(1) indicates that supports transmitting FCS error packet counts. A value of false(2) indicates that not support transmitting FCS error packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.19 | ||||
| remotePortCountersOutFcsErrorsThe total number of FCS error packets transmitted from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.20 | ||||
| remotePortCountersInGoodOctetsSupportedA value of true(1) indicates that supports receiving normal packet counts. A value of false(2) indicates that not support receiving normal packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.21 | ||||
| remotePortCountersInGoodOctetsThe total number of normal packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.22 | ||||
| remotePortCountersOutGoodOctetsSupportedA value of true(1) indicates that supports transmitting normal packet counts. A value of false(2) indicates that not support transmitting normal packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.23 | ||||
| remotePortCountersOutGoodOctetsThe total number of normal packets transmitted from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.24 | ||||
| remotePortCountersInBadOctetsSupportedA value of true(1) indicates that supports receiving bad packet counts. A value of false(2) indicates that not support receiving bad packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.25 | ||||
| remotePortCountersInBadOctetsThe total number of bad packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.26 | ||||
| remotePortCountersInDiscardsSupportedA value of true(1) indicates that supports receiving discard packet counts. A value of false(2) indicates that not support receiving discard packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.27 | ||||
| remotePortCountersInDiscardsThe total number of discard packets received from remote port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.28 | ||||
| remotePortCountersAlignmentErrorsSupportedA value of true(1) indicates that supports align error packet counts. A value of false(2) indicates that not support alignment error packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.29 | ||||
| remotePortCountersAlignmentErrorsA count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.30 | ||||
| remotePortCountersUndersizeErrorsSupportedA value of true(1) indicates that supports under error packet counts. A value of false(2) indicates that not support under error packet counts. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.31 | ||||
| remotePortCountersUndersizeErrorsThe total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.8.2.1.1.53.22.5.1.32 |
daiVlanTable
table.1.3.6.1.4.1.259.8.2.1.1.56.2.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::daiVlanTable'
A table contains dynamic ARP inspection configurations for existing VLANs.
An instance containing the configuration of dynamic ARP
inspection for each existing VLAN.
inspection for each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| daiVlanIndexThis object indicates the VLAN ID on which dynamic ARP inspection is configured. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.1 | ||||
| daiVlanStatusThis object indicates whether dynamic ARP inspection is enabled in this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.2 | ||||
| daiVlanArpAclNameSpecifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.3 | ||||
| daiVlanArpAclStatusSet to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping binding table. When daiVlanArpAclName is configured, the default v… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.259.8.2.1.1.56.2.1.1.4 |
daiPortTable
table.1.3.6.1.4.1.259.8.2.1.1.56.3.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::daiPortTable'
A table containing dynamic ARP inspection configurations for port interfaces.
An instance containing the configuration of dynamic ARP
inspection at each port interface.
inspection at each port interface.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| daiPortIfIndexThe ifIndex value of the port. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.1 | ||||
| daiPortTrustStatusThis object indicates whether the port is trusted for dynamic ARP inspection. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.2 | ||||
| daiPortRateLimitThe value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. | Unsigned32r/w Constraints: range: 0-2048range: 4294967295-4294967295 | .1.3.6.1.4.1.259.8.2.1.1.56.3.1.1.3 |
daiLogTable
table.1.3.6.1.4.1.259.8.2.1.1.56.4.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ES3528-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ES3528-MIB::daiLogTable'
A table containing dynamic ARP inspection log information.
An instance containing log information of dynamic ARP
inspection at each VLAN interface.
inspection at each VLAN interface.
Indexes
| Column | Syntax | OID |
|---|---|---|
| daiLogIndexThis object indicates the index of dynamic ARP inspection log information. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.1 |
| daiLogVlanThis object indicates the VLAN ID of dynamic ARP inspection log information. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.2 |
| daiLogPortThis object indicates the ifIndex of dynamic ARP inspection log information. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.3 |
| daiLogSrcIpAddressThe source IP address of dynamic ARP inspection log information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.4 |
| daiLogDestIpAddressThe destination IP address of dynamic ARP inspection log information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.5 |
| daiLogSrcMacAddressThe source MAC address of dynamic ARP inspection log information. | TOKEN-RING-RMON-MIBMacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.6 |
| daiLogDestMacAddressThe destination MAC address of dynamic ARP inspection log information. | TOKEN-RING-RMON-MIBMacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.259.8.2.1.1.56.4.1.1.7 |