ENTERASYS-POWER-ETHERNET-EXT-MIB Table View

Power allocation management information for all slots.

etsysPseSlotPowerAllocationEntry row .1.3.6.1.4.1.5624.1.2.50.1.2.1.1

Power allocation management information for an entPhysicalEntry
that has an entPhysicalClass of container(5) and represents a
slot in the chassis that could be occupied by a Pse module.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
etsysPseSlotPowerMaximum The maximum power that can be consumed by the module in this slot, based on the module's characteristics. For slots without Pse modules this object MUST return zero.	WattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.50.1.2.1.1.1
etsysPseSlotPowerAssigned The power that will be allocated to this slot in manual mode. In auto mode, this object has no effect. Maintaining the value of this object across agent reboots is REQUIRED.	WattsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.50.1.2.1.1.2

Status information for all of the Pse power supply modules.

etsysPsePowerSupplyStatusEntry row .1.3.6.1.4.1.5624.1.2.50.1.3.6.1

Status information for an individual Pse power supply module.

Indexes

etsysPsePowerSupplyModuleNumber

Column	Syntax	OID
etsysPsePowerSupplyModuleNumber A unique number that identifies the Pse power supply and is relative to the module's physical location.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.50.1.3.6.1.1
etsysPsePowerSupplyModuleStatus Denotes the power supply's status.	Enumeration Enumerated Values: 1 infoNotAvailable 2 notInstalled 3 installedAndOperating 4 installedAndNotOperating	.1.3.6.1.4.1.5624.1.2.50.1.3.6.1.2

This table augments the pethMainPseTable of the
PowerEthernetMIB (rfc3621).  It provides objects
that are used to budget power.

etsysPseModulePowerManagementEntry row .1.3.6.1.4.1.5624.1.2.50.1.4.1.1

A set of objects that display, control, and calculate
the power consumption of a PSE.

Indexes

No indexes recorded

Column	Syntax	OID
etsysPseModulePowerMode This object controls the power management of the PSE. It also controls how etsysPseModulePowerClassBudget, etsysPseModulePowerUsage and etsysPsePortPowerLimit are utilized. In realtime mode, the power i…	Enumerationr/w Enumerated Values: 1 realtime 2 class	.1.3.6.1.4.1.5624.1.2.50.1.4.1.1.1
etsysPseModulePowerClassBudget In class mode, this is sum of all ports power according to their class upper bound, except classes 0 & 4 for which the actual power consumption is accounted. In realtime mode, this is sum of power consumed by all ports…	WattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.50.1.4.1.1.2
etsysPseModulePowerUsage In class mode, this is ratio of etsysPseModulePowerClassBudget over pethMainPsePower, expressed in percents. In realtime mode, this is ratio of pethMainPseConsumptionPower over pethMainPsePower, expressed in percents.	%Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.5624.1.2.50.1.4.1.1.3

This table augments the pethPsePortTable of the
PowerEthernetMIB (rfc3621).  It provides objects
that are used to budget power.

etsysPsePortPowerManagementEntry row .1.3.6.1.4.1.5624.1.2.50.1.5.1.1

A set of objects that display and control the power
consumption of a PSE, at the port level.

Indexes

No indexes recorded

Column	Syntax	OID
etsysPsePortPowerLimit This object sets the maximum power allowed on this port. If the port exceeds its power limit, it will be shut down. This object has effect only when its module is in realtime mode (specified by etsysPseModulePowerMode).…	milliwattsInteger32r/w Constraints: range: 0-34000	.1.3.6.1.4.1.5624.1.2.50.1.5.1.1.1
etsysPsePortPowerUsage Actual power consumption measured in real-time.	milliwattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.50.1.5.1.1.2
etsysPsePortPDType Describes the detected PD type on this port. A value of legacy(1) - indicates that the PD is using a capacitive signature, which is pre-IEEE standard. A value of ieee8023af(2)- indicates th…	Enumeration Enumerated Values: 1 legacy 2 ieee8023af 3 other 4 ieee8023 5 ieee8023at	.1.3.6.1.4.1.5624.1.2.50.1.5.1.1.3
etsysPsePortCapability This object indicates the IEEE Power over Ethernet standard this port supports.	Bits Enumerated Values: 0 other 1 ieee8023afCapable 2 ieee8023atCapable	.1.3.6.1.4.1.5624.1.2.50.1.5.1.1.4
etsysPsePortCapabilitySelect This object sets the port's power management capabilities based on the IEEE standard. ieee8023af (1) : IEEE Std 802.3af ieee8023at (2) : IEEE Std 802.3at Attempting to set this value to a c…	Enumerationr/w Enumerated Values: 1 ieee8023af 2 ieee8023at	.1.3.6.1.4.1.5624.1.2.50.1.5.1.1.5
etsysPsePortDetectionStatus Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is i…	Enumeration Enumerated Values: 1 disabled 2 searching 3 deliveringPower 4 fault 5 test 6 otherFault 7 requestingPower	.1.3.6.1.4.1.5624.1.2.50.1.5.1.1.6