ENTERASYS-POLICY-PROFILE-MIB Table View

A table containing policy profiles.  A policy is a group
of classification rules which may be applied on a per
user basis, to ports or to stations.

etsysPolicyProfileEntry row .1.3.6.1.4.1.5624.1.2.6.1.5.1

Conceptually defines a particular entry within the
etsysPolicyProfileTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across
entity resets.

Indexes

etsysPolicyProfileIndex

Column	Syntax	OID
etsysPolicyProfileIndex A unique arbitrary identifier for this Policy. Since a policy will be applied to a user regardless of his or her location in the network fabric policy names SHOULD be unique within the entire network fab…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.5624.1.2.6.1.5.1.1
etsysPolicyProfileName Administratively assigned textual description of this Policy. This object MUST NOT be modifiable while this entry's RowStatus is active(1).	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.5624.1.2.6.1.5.1.2
etsysPolicyProfileRowStatus This object allows for the dynamic creation and deletion of entries within the etsysPolicyProfileTable as well as the activation and deactivation of these entries. When this object's value is active(1) th…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5624.1.2.6.1.5.1.3
etsysPolicyProfilePortVidStatus This object defines whether a PVID override should be applied to ports which have this profile active. enabled(1) means that any port with this policy active will have this row's etsysPolicyProfilePortV…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.1.5.1.4
etsysPolicyProfilePortVid This object defines the PVID of this profile. If a port has an active policy and the policy's etsysPolicyProfilePortVidStatus is set to enabled(1), the etsysPolicyProfilePortVid will be applied to all u…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.5624.1.2.6.1.5.1.5
etsysPolicyProfilePriorityStatus This object defines whether a Class of Service should be applied to ports which have this profile active. enabled(1) means that any port with this policy active will have etsysPolicyProfilePriority appl…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.1.5.1.6
etsysPolicyProfilePriority This object defines the default ingress Class of Service of this profile. If a port has an active policy and the policy's etsysPolicyProfilePriorityStatus is set to enabled(1), the etsysPolicyProfilePri…	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.5624.1.2.6.1.5.1.7
etsysPolicyProfileEgressVlans The set of VLANs which are assigned by this policy to egress on ports for which this policy is active. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the releva…	VlanListr/w Type Constraints: range: 512	.1.3.6.1.4.1.5624.1.2.6.1.5.1.8
etsysPolicyProfileForbiddenVlans The set of VLANs which are prohibited by this policy to egress on ports for which this policy is active. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar contro…	VlanListr/w Type Constraints: range: 512	.1.3.6.1.4.1.5624.1.2.6.1.5.1.9
etsysPolicyProfileUntaggedVlans The set of VLANs which should transmit egress packets as untagged on ports for which this policy is active. This object is superseded on a per-port per-VLAN basis by any 'set' bits in dot1qVlanStaticUntaggedPorts.	VlanListr/w Type Constraints: range: 512	.1.3.6.1.4.1.5624.1.2.6.1.5.1.10
etsysPolicyProfileOverwriteTCI If set, the information contained within the TCI field of inbound, tagged packets will not be used by the device after the ingress classification stage of packet relay. The net effect will be that the TCI information…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.1.5.1.11
etsysPolicyProfileRulePrecedence Each octet will contain a single value representing the rule type to be matched against, defined by the PolicyClassificationRuleType textual convention. When read, will return the currently operating rule matching p…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.5624.1.2.6.1.5.1.12
etsysPolicyProfileVlanRFC3580Mappings The set of VLANs which are currently being mapped onto this policy profile by the etsysPolicyRFC3580MapTable. This only refers to the mapping of vlan-tunnel-attributes returned from RADIUS in an RFC3580 context.	VlanList Type Constraints: range: 512	.1.3.6.1.4.1.5624.1.2.6.1.5.1.13
etsysPolicyProfileMirrorIndex A reference to a packet mirror destination (defined elsewhere). A value of (-1) indicates no mirror is specified, but a mirror is not explicitly prohibited. A value of (0) indicates that …	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.5624.1.2.6.1.5.1.14
etsysPolicyProfileAuditSyslogEnable Enables the sending of a syslog message if no rule bound to this profile has prohibited it.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.1.5.1.15
etsysPolicyProfileAuditTrapEnable Enables the sending of a SNMP NOTIFICATION if no rule bound to this profile has prohibited it.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.1.5.1.16
etsysPolicyProfileDisablePort Will set the ifOperStatus of the port, on which the frame which used this profile was received, to disable, if if no rule bound to this profile has prohibited it.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.1.5.1.17
etsysPolicyProfileUsageList When read, a set bit indicates that this profile was used to send a syslog or trap message for corresponding port. When set, the native PortList will be bit-wise AND'ed with the set PortList, allowing the agent to cle…	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.5624.1.2.6.1.5.1.18
etsysPolicyProfileFstIndex A reference to a Flow Setup Throttling (FST) class as defined by the etsysFlowLimitingClassType object. A value of (0) indicates no FST class is specified.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5624.1.2.6.1.5.1.19
etsysPolicyProfileHttpRedirectIndex A reference to a HTTP Redirect server group as specified by the etsysPolicyHttpRedirectGroupIndex object. A value of (0) indicates no HTTP Redirect group is specified for this profile.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.5624.1.2.6.1.5.1.20
etsysPolicyProfilePortAuthOverride If a port has an active policy and that policy's etsysPolicyProfilePortAuthOverride is set to enabled(1), all frames arriving on the port will have that policy applied. In addition, any pre-existing entries with matchin…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.1.5.1.21
etsysPolicyProfileNSI This object defines the NSI (Network Service Identifier) of this profile. If a port has an active policy and the policy's etsysPolicyProfileNSI is set, the NSI is associated with this rows etsysPolicyProfilePortVid. …	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.5624.1.2.6.1.5.1.22
etsysPolicyProfileACL Administratively assigned textual description of the ACL rule list to apply.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.5624.1.2.6.1.5.1.23

This table provides aggregate port information on a per 
policy, per port type basis.

etsysPortPolicyProfileSummaryEntry row .1.3.6.1.4.1.5624.1.2.6.3.3.1

Conceptually defines a particular entry within the
etsysPortPolicyProfileSummaryTable.

Indexes

etsysPolicyProfileIndex etsysPortPolicyProfileSummaryIndexType

Column	Syntax	OID
etsysPortPolicyProfileSummaryIndexType This object defines the specific type of port this entry represents.	PortPolicyProfileIndexTypeTC Type Values: 1 ifIndex 2 dot1dBasePort	.1.3.6.1.4.1.5624.1.2.6.3.3.1.1
etsysPortPolicyProfileSummaryAdminID An aggregate list of all Ports currently supporting rules which assign this profileIndex through administrative means. Rules of this type have a valid etsysPolicyRuleResult2 action and a profileIndex of 0.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.5624.1.2.6.3.3.1.2
etsysPortPolicyProfileSummaryOperID An aggregate list of all Ports currently supporting rules which assign this profileIndex through either an administrative or dynamic means. The profileId which will be assigned operationally, as frames are handled ar…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.5624.1.2.6.3.3.1.3
etsysPortPolicyProfileSummaryDynamicID An aggregate list of all Ports currently supporting rules which assign this profileIndex through a dynamic means. For example the profileIndex returned via a successful 802.1X supplicant authentication.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.5624.1.2.6.3.3.1.4

This table allows for a one to one mapping between a 
station's identifying address and a Policy Profile.

etsysStationPolicyProfileEntry row .1.3.6.1.4.1.5624.1.2.6.5.4.1

Describes a particular entry within the
etsysStationPolicyProfileTable. Entries within this
table MUST be considered non-volatile and MUST be
maintained across entity resets.

Indexes

etsysStationPolicyProfileIndex

Column	Syntax	OID
etsysStationPolicyProfileIndex An index value which represents a unique station entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5624.1.2.6.5.4.1.2
etsysStationIdentifierType Indicates the type of station identifying address contained in etsysStationIdentifier.	ENTERASYS-UPN-TC-MIBStationAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 mac 16 dns	.1.3.6.1.4.1.5624.1.2.6.5.4.1.3
etsysStationIdentifier A value which represents a unique MAC Address, IP Address, or other identifying address for a station, or other logical and authenticatable sub-entity within a station, connected to a port.	ENTERASYS-UPN-TC-MIBStationAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.5624.1.2.6.5.4.1.4
etsysStationPolicyProfileOperID This object is the current policy which is being applied to this entry's MAC Address. A value of zero(0) indicates there is no policy being applied to this MAC Address. The value of this object reflects …	PolicyProfileIDTC Type Constraints: range: 0..65535	.1.3.6.1.4.1.5624.1.2.6.5.4.1.5
etsysStationPolicyProfilePortType A textual convention that defines the specific type of port designator the corresponding entry represents.	PortPolicyProfileIndexTypeTC Type Values: 1 ifIndex 2 dot1dBasePort	.1.3.6.1.4.1.5624.1.2.6.5.4.1.6
etsysStationPolicyProfilePortID A value which represents the physical port, of the type defined by this entry's etsysStationPolicyProfilePortType, on which the associated station entity is connected. This object is for convenience in cross referencin…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5624.1.2.6.5.4.1.7

This table allows for the configuration of policy profile 
assignment methods, per port, including the ability to disable
policy profile assignment, per port.  In addition, a ports 
capabilities, with respect to policy profile assignment are 
reported.

etsysPolicyEnabledTableEntry row .1.3.6.1.4.1.5624.1.2.6.9.12.1

Describes a particular entry within the
etsysPolicyEnabledTable.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
etsysPolicyEnabledSupportedRuleTypes The list of rule types which the devices supports for the purpose of assigning policy profiles to network traffic ingressing this dot1dBasePort.	PolicyRulesSupported Type Values: 1 macSource 2 macDestination 3 ipxSource 4 ipxDestination 5 ipxSourcePort 6 ipxDestinationPort 7 ipxCos 8 ipxType 9 ip6Source 10 ip6Destination 11 ip6FlowLabel 12 ip4Source 13 ip4Destination 14 ipFragment 15 udpSourcePort 16 udpDestinationPort 17 tcpSourcePort 18 tcpDestinationPort 19 icmpTypeCode 20 ipTtl 21 ipTos 22 ipType 23 icmpTypeCodeV6 25 etherType 26 llcDsapSsap 27 vlanId 28 ieee8021dTci 29 application 30 acl 31 bridgePort 32 ip4SourceRange 33 ip4DestinationRange 34 udpSourcePortRange 35 udpDestinationPortRange 36 tcpSourcePortRange 37 tcpDestinationPortRange	.1.3.6.1.4.1.5624.1.2.6.9.12.1.1
etsysPolicyEnabledEnabledRuleTypes The list of rule types from which the device will assign policy profiles to network traffic ingressing this dot1dBasePort. Rules which have a type not enumerated here must not be used to assign policy profiles, but mu…	PolicyRulesSupportedr/w Type Values: 1 macSource 2 macDestination 3 ipxSource 4 ipxDestination 5 ipxSourcePort 6 ipxDestinationPort 7 ipxCos 8 ipxType 9 ip6Source 10 ip6Destination 11 ip6FlowLabel 12 ip4Source 13 ip4Destination 14 ipFragment 15 udpSourcePort 16 udpDestinationPort 17 tcpSourcePort 18 tcpDestinationPort 19 icmpTypeCode 20 ipTtl 21 ipTos 22 ipType 23 icmpTypeCodeV6 25 etherType 26 llcDsapSsap 27 vlanId 28 ieee8021dTci 29 application 30 acl 31 bridgePort 32 ip4SourceRange 33 ip4DestinationRange 34 udpSourcePortRange 35 udpDestinationPortRange 36 tcpSourcePortRange 37 tcpDestinationPortRange	.1.3.6.1.4.1.5624.1.2.6.9.12.1.2
etsysPolicyEnabledEgressEnabled Controls the enabling and disabling the application of policy as packets egress the switching process on the dot1dBasePort specified in the indexing.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.9.12.1.3

This table details each supported rule type attribute
for rule data length in bytes, rule data length in bits, 
and the maximum number of rules that may use that type.

etsysPolicyRuleAttributeTableEntry row .1.3.6.1.4.1.5624.1.2.6.9.13.1

Describes a particular entry within the
etsysPolicyRuleAttributeTable.

Indexes

etsysPolicyRuleType

Column	Syntax	OID
etsysPolicyRuleAttributeByteLength This rule type's maximum length, in bytes of the etsysPolicyRuleData. Devices supporting this object MUST allow sets for this rule data of any valid length up to and including the length value represented by this ob…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5624.1.2.6.9.13.1.1
etsysPolicyRuleAttributeBitLength This rule type's maximum bit length for traffic data. This value also represents the maximum mask that may be used for rule data. The mask MUST NOT exceed the rule data size. Masks that exceed the data size shall be co…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5624.1.2.6.9.13.1.2
etsysPolicyRuleAttributeMaxCreatable If this value is non-zero, the value indicates the maximum number of rules of this type the agent can support.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5624.1.2.6.9.13.1.3

This has been obsoleted.

etsysPolicyMapEntry row .1.3.6.1.4.1.5624.1.2.6.10.6.1

This has been obsoleted.

Indexes

etsysPolicyMapIndex

Column	Syntax	OID
etsysPolicyMapIndexobsolete This has been obsoleted.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.5624.1.2.6.10.6.1.1
etsysPolicyMapRowStatusobsolete This has been obsoleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5624.1.2.6.10.6.1.2
etsysPolicyMapStartVidobsolete This has been obsoleted.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5624.1.2.6.10.6.1.3
etsysPolicyMapEndVidobsolete This has been obsoleted.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5624.1.2.6.10.6.1.4
etsysPolicyMapPolicyIndexobsolete This has been obsoleted.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5624.1.2.6.10.6.1.5

A table containing rules bound to individual policies.  A
Rule is comprised of three components, a unique description
of the network traffic, an associated list of actions, and
an associated list of accounting and auditing controls and 
information.
          
The unique description of the network traffic, defined by a
PolicyClassificationRuleType together with a length, 
matching data and a relevant bits field, port type,
and port number (port number zero is reserved to mean any
port), and scoped by a etsysPolicyProfileIndex, is used 
as the table index.

etsysPolicyRuleEntry row .1.3.6.1.4.1.5624.1.2.6.11.6.1

Describes a particular entry within the
etsysPolicyRuleTable. Entries within this table
MUST be considered non-volatile and MUST be maintained
across entity resets.

Indexes

etsysPolicyRuleProfileIndex etsysPolicyRuleType etsysPolicyRuleData etsysPolicyRulePrefixBits etsysPolicyRulePortType etsysPolicyRulePort

Column	Syntax	OID
etsysPolicyRuleProfileIndex The etsysPolicyProfileIndex for which the rule is defined. A value of zero(0) has special meaning in that it scopes rules which are used to determine the Policy Profile to which the frame belongs. See th…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.5624.1.2.6.11.6.1.1
etsysPolicyRuleType The type of network traffic reference by the etsysPolicyRuleData.	PolicyClassificationRuleType Type Values: 1 macSource 2 macDestination 3 ipxSource 4 ipxDestination 5 ipxSourcePort 6 ipxDestinationPort 7 ipxCos 8 ipxType 9 ip6Source 10 ip6Destination 11 ip6FlowLabel 12 ip4Source 13 ip4Destination 14 ipFragment 15 udpSourcePort 16 udpDestinationPort 17 tcpSourcePort 18 tcpDestinationPort 19 icmpTypeCode 20 ipTtl 21 ipTos 22 ipType 23 icmpTypeCodeV6 25 etherType 26 llcDsapSsap 27 vlanId 28 ieee8021dTci 29 application 30 acl 31 bridgePort 32 ip4SourceRange 33 ip4DestinationRange 34 udpSourcePortRange 35 udpDestinationPortRange 36 tcpSourcePortRange 37 tcpDestinationPortRange	.1.3.6.1.4.1.5624.1.2.6.11.6.1.2
etsysPolicyRuleData The data pattern to match against, as defined by the etsysPolicyRuleType, encoded in network-byte order.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.5624.1.2.6.11.6.1.3
etsysPolicyRulePrefixBits The relevant number of bits defined by the etsysPolicyRuleData, to be used when matching against a frame, relevant bits are specified in longest-prefix-first style (left to right). A value of zero carries the special…	Integer32 Constraints: range: 0-2048	.1.3.6.1.4.1.5624.1.2.6.11.6.1.4
etsysPolicyRulePortType The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all ports.	PortPolicyProfileIndexTypeTC Type Values: 1 ifIndex 2 dot1dBasePort	.1.3.6.1.4.1.5624.1.2.6.11.6.1.5
etsysPolicyRulePort The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all ports.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.5624.1.2.6.11.6.1.6
etsysPolicyRuleRowStatus The status of this row. When set to active(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, becomes one of its associated policy's set of rules. When this entry'…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5624.1.2.6.11.6.1.7
etsysPolicyRuleStorageType The storage type of this row. When set to volatile(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, will be removed (if present) from non-volatile storage. Rows created dynamic…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.5624.1.2.6.11.6.1.8
etsysPolicyRuleUsageList When read, a set bit indicates that this rule was used to classify traffic on the corresponding port. When set, the native PortList will be bit-wise AND'ed with the set PortList, allowing the agent to clear the usage …	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.5624.1.2.6.11.6.1.9
etsysPolicyRuleResult1 If the etsysPolicyRuleProfileIndex is 0 then this field is read-only and defines the profile ID which will be assigned to frames matching this rule. This is the dynamically assigned value and may differ from the admin…	Integer32r/w Constraints: range: -1-4095	.1.3.6.1.4.1.5624.1.2.6.11.6.1.10
etsysPolicyRuleResult2 If the etsysPolicyRuleProfileIndex is 0 then this field is read-create and defines the profile ID which the managing entity desires assigned to frames matching this rule. This is the administrative value and may differ…	Integer32r/w Constraints: range: -1-4095	.1.3.6.1.4.1.5624.1.2.6.11.6.1.11
etsysPolicyRuleAuditSyslogEnable Controls the sending of a syslog message when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1.	TriStateStatusr/w Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.6.1.12
etsysPolicyRuleAuditTrapEnable Controls the sending of an SNMP NOTIFICATION when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1.	TriStateStatusr/w Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.6.1.13
etsysPolicyRuleDisablePort Controls the disabling of a port (ifOperStatus of the corresponding ifIndex will be down) when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1. When set to enabled, the corresponding ifIndex will be disa…	TriStateStatusr/w Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.6.1.14
etsysPolicyRuleOperPid If the etsysPolicyRuleProfileIndex is 0 then this field contains the currently applied profile ID for frames matching this rule. This may be either the administratively applied value or the dynamically applied value. …	Integer32 Constraints: range: -1-4095	.1.3.6.1.4.1.5624.1.2.6.11.6.1.15
etsysPolicyRuleOverwriteTCI If set, the information contained within the TCI field of inbound, tagged packets will not be used by the device after the ingress classification stage of packet relay. The net effect will be that the TCI information…	TriStateStatusr/w Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.6.1.16
etsysPolicyRuleMirrorIndex A reference to a packet mirror destination (defined elsewhere). A value of (-1) indicates no mirror is specified, but a mirror is not explicitly prohibited. A value of (0) indicates that …	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.5624.1.2.6.11.6.1.17
etsysPolicyRuleQuarantineProfileIndex If the etsysPolicyRuleProfileIndex is not 0 this field defines the profile ID which will be used as the quarantine provisioning agents mux response for the mac address and port whose frames matched this rule. …	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.5624.1.2.6.11.6.1.18
etsysPolicyRuleHttpRedirectIndex A reference to a HTTP Redirect server group as specified by the etsysPolicyHttpRedirectGroupIndex object. A value of (-1) indicates no HTTP Redirect is specified, but HTTP redirection is not explicitly p…	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.5624.1.2.6.11.6.1.19

The purpose of this table is to provide an agent the
ability to easily determine which rules have been used
on a given bridge port.  A row will only be present when
the rule which the instancing describes has been used.
The agent may remove a row (and clear the used status)
by setting the etsysPolicyRulePortHit leaf to False.
PolicyClassificationRuleType together with a length,
matching data and a relevant bits field, port type,
and port number (port number zero is reserved to mean any
port), scoped by a etsysPolicyRuleProfileIndex, and preceded by
a dot1dBasePort is used as the table index.

etsysPolicyRulePortEntry row .1.3.6.1.4.1.5624.1.2.6.11.7.1

.

Indexes

BRIDGE-MIBdot1dBasePort etsysPolicyRuleProfileIndex etsysPolicyRuleType etsysPolicyRuleData etsysPolicyRulePrefixBits etsysPolicyRulePortType etsysPolicyRulePort

Column	Syntax	OID
etsysPolicyRulePortHit Every row will report a value of True, indicating that the Rule described by the instancing was used on the given port. An agent may be set this leaf to False to clear remove the row and clear the Rule Use bit for the…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.6.11.7.1.1

A table containing rules bound to individual policies.  The 
rules here contained are representations of the non-volatile
rules contained in the etsysPolicyRuleTable defined in this MIB.
          
A Rule is comprised of three components, a unique description
of the network traffic, an associated list of actions, and
an associated list of accounting and auditing controls and 
information.
          
The unique description of the network traffic, defined by a
PolicyClassificationRuleType together with a length, 
matching data and a relevant bits field, port type,
and port number (port number zero is reserved to mean any
port), and scoped by a etsysPolicyProfileIndex, is used 
as the table index.

etsysPolicyNonVolatileRuleEntry row .1.3.6.1.4.1.5624.1.2.6.11.20.1

Describes a particular entry within the
etsysPolicyNonVolatileRuleTable. Entries within this table
are representations of the non-volatile entries found
in the etsysPolicyRuleTable.

Indexes

etsysPolicyRuleProfileIndex etsysPolicyRuleType etsysPolicyRuleData etsysPolicyRulePrefixBits etsysPolicyRulePortType etsysPolicyRulePort

Column	Syntax	OID
etsysPolicyNonVolatileRuleRowStatus The status of this row. When active(1) this entry's classification rule, is one of its associated policy's set of rules. When this entry's associated policy, as defined by etsysPolicyRule…	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.5624.1.2.6.11.20.1.7
etsysPolicyNonVolatileRuleStorageType The storage type of this row. For all entries in the table this is set to nonVolatile(1), and as such, this entry's classification rule will be added to non-volatile storage.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.5624.1.2.6.11.20.1.8
etsysPolicyNonVolatileRuleUsageList When read, a set bit indicates that this rule was used to classify traffic on the corresponding port.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.5624.1.2.6.11.20.1.9
etsysPolicyNonVolatileRuleResult1 If the etsysPolicyRuleProfileIndex is 0 this field defines the profile ID which will be assigned to frames matching this rule. This is the dynamically assigned value and may differ from the administratively configur…	Integer32 Constraints: range: -1-4095	.1.3.6.1.4.1.5624.1.2.6.11.20.1.10
etsysPolicyNonVolatileRuleResult2 If the etsysPolicyRuleProfileIndex is 0 this field defines the profile ID which the managing entity desires assigned to frames matching this rule. This is the administrative value and may differ from the dynamically …	Integer32 Constraints: range: -1-4095	.1.3.6.1.4.1.5624.1.2.6.11.20.1.11
etsysPolicyNonVolatileRuleAuditSyslogEnable If enabled, a syslog message is sent when a bit in the etsysPolicyNonVolatileRuleUsageList transitions from 0 to 1.	TriStateStatus Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.20.1.12
etsysPolicyNonVolatileRuleAuditTrapEnable If enabled, an SNMP NOTIFICATION is sent when a bit in the etsysPolicyNonVolatileRuleUsageList transitions from 0 to 1.	TriStateStatus Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.20.1.13
etsysPolicyNonVolatileRuleDisablePort If enabled, a port is disabled (ifOperStatus of the corresponding ifIndex will be down) when a bit in the etsysPolicyNonVolatileRuleUsageList transitions from 0 to 1.	TriStateStatus Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.20.1.14
etsysPolicyNonVolatileRuleOperPid If the etsysPolicyRuleProfileIndex is 0 then this field contains the currently applied profile ID for frames matching this rule. This may be either the administratively applied value or the dynamically applied value. …	Integer32 Constraints: range: -1-4095	.1.3.6.1.4.1.5624.1.2.6.11.20.1.15
etsysPolicyNonVolatileRuleOverwriteTCI If set, the information contained within the TCI field of inbound, tagged packets will not be used by the device after the ingress classification stage of packet relay. The net effect will be that the TCI information…	TriStateStatus Type Values: 1 enabled 2 disabled 3 prohibited	.1.3.6.1.4.1.5624.1.2.6.11.20.1.16
etsysPolicyNonVolatileRuleMirrorIndex A reference to a packet mirror destination (defined elsewhere). A value of (-1) indicates no mirror is specified, but a mirror is not explicitly prohibited. A value of (0) indicates that …	Integer32 Constraints: range: -1-255	.1.3.6.1.4.1.5624.1.2.6.11.20.1.17
etsysPolicyNonVolatileRuleQuarantineProfileIndex If the etsysPolicyRuleProfileIndex is not 0 this field defines the profile ID which will be used as the quarantine provisioning agents mux response for the mac address and port whose frames matched this rule. …	Integer32 Constraints: range: -1-65535	.1.3.6.1.4.1.5624.1.2.6.11.20.1.18

A table containing VLAN ID to policy mappings. A policy is
a group of classification rules which may be applied on a 
per user basis, to ports or to stations.

etsysPolicyRFC3580MapEntry row .1.3.6.1.4.1.5624.1.2.6.12.4.1

Conceptually defines a particular entry within the
etsysPolicyRFC3580MapTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across
entity resets.

Indexes

etsysPolicyRFC3580MapVlanId

Column	Syntax	OID
etsysPolicyRFC3580MapVlanId The VlanIndex which will map to the policy profile specified by the etsysPolicyRFC3580MapPolicyIndex of this row. This will be used to map the VLAN returned by value from the Tunnel- Private-Group-ID RADIUS attribute.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.5624.1.2.6.12.4.1.1
etsysPolicyRFC3580MapPolicyIndex The index of a Policy Profle as defined in the etsysPolicyProfileTable. A value of 0 indicates that the row is functionally non- operational (no mapping exists). Devices which support the ENTERASYS-V…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5624.1.2.6.12.4.1.2

A table containing TCP sockets the device will listen on
for HTTP traffic to redirect.  Entries within
this table MUST be considered non-volatile and MUST be 
maintained across entity resets.

etsysPolicyHttpRedirectSocketEntry row .1.3.6.1.4.1.5624.1.2.6.13.4.1

Conceptually specifies a TCP socket the device will listen on
for HTTP traffic to redirect.

Indexes

etsysPolicyHttpRedirectSocketIndex

Column	Syntax	OID
etsysPolicyHttpRedirectSocketIndex An arbitrary index from 1 to etsysPolicyHttpRedirectMaxNumSockets.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.5624.1.2.6.13.4.1.1
etsysPolicyHttpRedirectListenSocket TCP port number (1-65535) that the device will listen on for HTTP traffic suitable for redirection. A value of 0 indicates that this entry does not specify a TCP socket to listen on.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.5624.1.2.6.13.4.1.2

A table containing HTTP redirect server group entries.

etsysPolicyHttpRedirectServerEntry row .1.3.6.1.4.1.5624.1.2.6.13.5.1

Conceptually defines a HTTP redirect server group. Within each
group, one or more redirect servers may be defined. HTTP
redirects will be sent to different servers within a group
using a round-robin algorithm. Entrie…

Indexes

etsysPolicyHttpRedirectGroupIndex etsysPolicyHttpRedirectServerIndex

Column	Syntax	OID
etsysPolicyHttpRedirectGroupIndex The index referenced by etsysPolicyProfileHttpRedirectIndex to identify a particular HTTP redirect server group. The maximum value of this index is specified by the etsysPolicyHttpRedirectNumServerGroups object.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.5624.1.2.6.13.5.1.1
etsysPolicyHttpRedirectServerIndex The index for a particular server within the redirect group. The maximum value of this index is specified by the etsysPolicyHttpRedirectMaxNumServer object.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.5624.1.2.6.13.5.1.2
etsysPolicyHttpRedirectServerUri The absolute URI on the redirect server to redirect the user to. This object MUST specify the scheme, authority and path. The URI may optionally include a query and/or fragment portions as well.	URI-TC-MIBUrir/w	.1.3.6.1.4.1.5624.1.2.6.13.5.1.3
etsysPolicyHttpRedirectServerStatus A value of enabled(1) causes the entry to be made ready for use in redirecting HTTP traffic. A set of enabled(1) will only succeed if the the other entries with STATUS of read-write in table have been set to appropri…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.6.13.5.1.4