ENTERASYS-OSPF-EXT-MIB Table View

This table provides additional information pertaining to
OSPF Areas for Enterasys OSPF systems.

etsysOspfExtAreaEntry row .1.3.6.1.4.1.5624.1.2.65.1.2.1.1

An entry (conceptual row) in the etsysOspfExtAreaTable.

Indexes

No indexes recorded

Column	Syntax	OID
etsysOspfExtAreaAdminStatus The desired administrative state of this OSPF area. When the status of this object is set to 'disabled', no flooding will occur for routes in this area and all routes for this area are removed from the RI…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.1
etsysOspfExtAreaOperStatus The current operational state of this OSPF area.	EtsysOspfOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.2
etsysOspfExtAreaTransitCapability This parameter indicates whether the area can carry data traffic that neither originates nor terminates in the area itself. This parameter is calculated when the area's shortest-path tree is built.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.3
etsysOspfExtAreaLsaRfshIntvl Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs in this area, and is defaulted to the …	secondsUnsigned32r/w Constraints: range: 1-3599	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.4
etsysOspfExtAreaRtrLsaCount The number of LSAs with LS type-1 in this area's Link State Database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.5
etsysOspfExtAreaRtrLsaCksumSum The 32 bit sum of LS checksums of all LSAs with LS type-1 in this area's Link State Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.6
etsysOspfExtAreaNetLsaCount The number of LSAs with LS type-2 in this area's Link State Database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.7
etsysOspfExtAreaNetLsaCksumSum The 32 bit sum of LS checksums of all LSAs with LS type-2 in this area's Link State Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.8
etsysOspfExtAreaSummLsaCount The number of LSAs with LS type-3 in this area's Link State Database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.9
etsysOspfExtAreaSummLsaCksumSum The 32 bit sum of LS checksums of all LSAs with LS type-3 in this area's Link State Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.10
etsysOspfExtAreaSummAsLsaCount The number of LSAs with LS type-4 in this area's Link State Database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.11
etsysOspfExtAreaSummAsLsaCksumSum The 32 bit sum of LS checksums of all LSAs with LS type-4 in this area's Link State Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.12
etsysOspfExtAreaNssaLsaCount The number of LSAs with LS type-7 in this area's Link State Database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.13
etsysOspfExtAreaNssaLsaCksumSum The 32 bit sum of LS checksums of all LSAs with LS type-7 in this area's Link State Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.14
etsysOspfExtAreaOpLsaCount The number of LSAs with LS type-10 in this area's Link State Database.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.15
etsysOspfExtAreaOpLsaCksumSum The 32 bit sum of LS checksums of all LSAs with LS type-10 in this area's Link State Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.1.1.16

This table provides additional information pertaining to
OSPF Interfaces for Enterasys OSPF systems.

etsysOspfExtIfEntry row .1.3.6.1.4.1.5624.1.2.65.1.2.2.1

An entry (conceptual row) in the etsysOspfExtIfTable.

Indexes

No indexes recorded

Column	Syntax	OID
etsysOspfExtIfOperStatus The current operational state of OSPF on this interface.	EtsysOspfOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.1
etsysOspfExtIfNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.2
etsysOspfExtIfTransmitTimerDelay The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic. This is configurable on a per-interface basis.	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.3
etsysOspfExtIfIPMaxPacketSize Maximum transfer unit (MTU) for the network interface. This is the maximum packet size in bytes for packets sent over the network interface. This size excludes link layer headers but includes IP headers …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.4
etsysOspfExtIfPassive Indicates whether this interface is a passive interface. If set to 'true', we suppress HELLO packets sent on and received from this interface. We will therefore advertise this interface in our LSAs but not run the OSP…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.5
etsysOspfExtIfLsaRefreshIntvl Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs that are only flooded over this interf…	secondsUnsigned32r/w Constraints: range: 1-3599	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.6
etsysOspfExtIfHelperModePolicy Indicates whether OSPF will help a neighbor undergoing hitless restart on this interface for the specified reason. This field contains a bit flag for each of OspfHitlessRestartReasons. If a bit flag for a specific resta…	Bitsr/w Enumerated Values: 0 reasonUnknown 1 reasonSoftwareRestart 2 reasonSoftwareReload 3 reasonSwitchToBackup	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.7
etsysOspfExtIfMaxHitlessGracePeriod If configured to help neighbors undergoing hitless restart on this interface, this field indicates the maximum grace period that will be allowed for a neighboring router undergoing hitless restart. If a type-9 grace LS…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.8
etsysOspfExtIfAuthUserData Authentication user data for interface level authentication. This data is passed opaquely to the authentication process, where it can be used to assist with authentication decisions. When r…	OctetStringr/w Constraints: range: 0-4	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.9
etsysOspfExtIfFastHelloMultiplier The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached to a common network, but it is advisable. Fast Hellos are…	Unsigned32r/w Constraints: range: 3-20	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.10
etsysOspfExtIfAutoDeleteNbr Whether dynamically created entries in the ospfNbrTable should be kept when the adjacency goes down. If this object is set to 'false', then a dynamically created entry in the ospfNbrTable will remain with…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.11
etsysOspfExtIfMtuIgnore This object controls whether OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming int…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.65.1.2.2.1.12

This table provides additional information pertaining to
OSPF Virtual Interfaces for Enterasys OSPF systems.

etsysOspfExtVirtIfEntry row .1.3.6.1.4.1.5624.1.2.65.1.2.3.1

An entry (conceptual row) in the etsysOspfExtVirtIfTable.

Indexes

No indexes recorded

Column	Syntax	OID
etsysOspfExtVirtIfAdminStatus The desired administrative state of this virtual interface. When the status of this object is set to 'disabled', the virtual link is torn down and no routing information is exchanged with its peer. …	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.1
etsysOspfExtVirtIfOperStatus The current operational state of OSPF on this virtual interface.	EtsysOspfOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.2
etsysOspfExtVirtIfTransmitTimerDelay The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic. This is configurable on a per-interface basis.	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.3
etsysOspfExtVirtIfIPMaxPacketSize Maximum transfer unit (MTU) for the network interface. This is the maximum packet size in bytes for packets sent over the network interface. This size excludes link layer headers but includes IP headers …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.4
etsysOspfExtVirtIfPassive Indicates whether this interface is a passive interface. If set to 'true', we suppress HELLO packets sent on and received from this interface. We will therefore advertise this interface in our LSAs but not run the OSP…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.5
etsysOspfExtVirtIfLsaRefreshIntvl Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs that are only flooded over this interf…	secondsUnsigned32r/w Constraints: range: 1-3599	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.6
etsysOspfExtVirtIfHelperModePolicy Indicates whether OSPF will help a neighbor undergoing hitless restart on this interface for the specified reason. This field contains a bit flag for each of OspfHitlessRestartReasons. If a bit flag for a specific resta…	Bitsr/w Enumerated Values: 0 reasonUnknown 1 reasonSoftwareRestart 2 reasonSoftwareReload 3 reasonSwitchToBackup	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.7
etsysOspfExtVirtIfMaxHtlssGracePeriod If configured to help neighbors undergoing hitless restart on this interface, this field indicates the maximum grace period that will be allowed for a neighboring router undergoing hitless restart. If a type-9 grace L…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.8
etsysOspfExtVirtIfFastHelloMultiplier The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached to a common network, but it is advisable. Fast Hellos are…	Unsigned32r/w Constraints: range: 3-20	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.9
etsysOspfExtVirtIfMtuIgnore This object controls whether OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming int…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.65.1.2.3.1.10

This table provides additional information pertaining to
OSPF Neighbors for Enterasys OSPF systems.

etsysOspfExtNbrEntry row .1.3.6.1.4.1.5624.1.2.65.1.2.4.1

An entry (conceptual row) in the etsysOspfExtNbrTable.

Indexes

No indexes recorded

Column	Syntax	OID
etsysOspfExtNbrAdminStatus The desired administrative state of this neighbor. When the status of this object is set to 'disabled', the connection to the neighbor is torn down and the routes learned from this neighbor are removed fr…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.5624.1.2.65.1.2.4.1.1
etsysOspfExtNbrOperStatus The current operational state of this neighbor.	EtsysOspfOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed	.1.3.6.1.4.1.5624.1.2.65.1.2.4.1.2
etsysOspfExtNbrNumRequests The number of LSAs requested from this neighbor for which we are awaiting for a response. This field is incremented when an LSA is requested by sending a LS request packet and is decremented when the LSA arrives in a L…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.4.1.3
etsysOspfExtNbrIfIpAddr The IP address of the interface used for this neighbor. If this value is set to zero OSPF will choose a suitable interface to use. If this value is non-zero this neighbor will only be associated with an exactly matchi…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5624.1.2.65.1.2.4.1.4
etsysOspfExtNbrDeadTime The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1. If the etsysOspfExtNbrOperSta…	secondsUnsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5624.1.2.65.1.2.4.1.5
etsysOspfExtNbrAreaId The area to which the neighbor belongs. If the etsysOspfExtNbrOperStatus is down, then this value is set to zero and the field is not valid.	OSPF-MIBAreaID	.1.3.6.1.4.1.5624.1.2.65.1.2.4.1.6

This table provides additional information pertaining to
OSPF Virtual Neighbors for Enterasys OSPF systems.

etsysOspfExtVirtNbrEntry row .1.3.6.1.4.1.5624.1.2.65.1.2.5.1

An entry (conceptual row) in the etsysOspfExtVirtNbrTable.

Indexes

No indexes recorded

Column	Syntax	OID
etsysOspfExtVirtNbrNumRequests The number of LSAs requested from this neighbor for which we are awaiting for a response. This field is incremented when an LSA is requested by sending a LS request packet and is decremented when the LSA arrives in an …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.65.1.2.5.1.1
etsysOspfExtVirtNbrDeadTime The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.5624.1.2.65.1.2.5.1.2

This table provides additional information pertaining to
OSPF Local LS Database for Enterasys OSPF systems.

etsysOspfExtLocalLsdbEntry row .1.3.6.1.4.1.5624.1.2.65.1.2.6.1

An entry (conceptual row) in the etsysOspfExtLocalLsdbTable.

Indexes

No indexes recorded

Column	Syntax	OID
etsysOspfExtLocalLsdbAreaId The OSPF area in which the link belongs.	OSPF-MIBAreaID	.1.3.6.1.4.1.5624.1.2.65.1.2.6.1.1