ENTERASYS-NAT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
72

etsysNatTranslationProtocolRulesTable

table
.1.3.6.1.4.1.5624.1.2.75.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysNatTranslationProtocolRulesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-NAT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-NAT-MIB::etsysNatTranslationProtocolRulesTable' 
A table of entries defining NAT rules for non standard 
protocols.
etsysNatTranslationProtocolRulesEntry row .1.3.6.1.4.1.5624.1.2.75.2.1.1
An entry in the etsysNatTranslationProtocolRulesTable
defining the configuration values for a unique NAT
Translation Protocol entry. The Translation Protocol Rules
Table entry defines the protocol and timeout value …
Indexes
Column Syntax OID
etsysNatTranslationInetVersion
The Internet address version of the NAT Translation
Protocol Rule.
INET-ADDRESS-MIBInetVersion
Type Values:
0unknown
1ipv4
2ipv6
 .1.3.6.1.4.1.5624.1.2.75.2.1.1.1
etsysNatTranslationProtocol
The NAT Translation Internet Protocol number. A value of
any(0) indicates that any protocol is allowed. Common IP
Protocol values are ICMP(1), TCP(6) or UDP(17). All IP
Protocol values except for TCP and UDP requir…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.5624.1.2.75.2.1.1.2
etsysNatTranslationPort
The port assigned to this NAT Translation Protocol
entry. A value of '0' indicates any port is allowed for this
NAT Translation Protocol entry. An entry in
etsysNatTranslationProtocol of either TCP(6) or UDP(17)
ma…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.1.1.3
etsysNatTranslationTimeout
The timeout value for idle NAT translations using this
NAT Translation Protocol entry.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.1.1.4
etsysNatTranslationOneShot
This object enables the One Shot feature for this NAT
Translation Protocol entry. One Shot is a feature specific to
protocol bindings such as ICMP and UDP traffic such as DNS
which are generally bi-directional and usua…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.5624.1.2.75.2.1.1.5
etsysNatTranslationRowStatus
This object permits management of the table by facilitating
actions such as row creation and deletion.

The value of this object has no effect on whether other
objects in the conceptual row can be modifie…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5624.1.2.75.2.1.1.6

etsysNatPoolTable

table
.1.3.6.1.4.1.5624.1.2.75.2.2 · 1 row entry · 17 columns
Open in standard view
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysNatPoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-NAT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-NAT-MIB::etsysNatPoolTable' 
A table of entries defining the operational characteristics
of NAT Pools.
etsysNatPoolEntry row .1.3.6.1.4.1.5624.1.2.75.2.2.1
An entry in the etsysNatPoolTable containing the operational
characteristics of a NAT Pool. A NAT Pool defines a range of
public (outside) IP addresses defining this NAT pool and is
identified by etsysNatPoolName.
Indexes
Column Syntax OID
etsysNatPoolAddressType
The Internet Protocol version. The value of this property
affects the size and format of: etsysNatPoolFirstIpAddr,
etsysNatPoolLastIpAddr, and etsysNatPoolNextIpAddr.
All objects must be of the same INET Address Typ…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.1
etsysNatPoolName
This object contains the unique name of the NAT Pool.
OctetString
Constraints:
range: 1-63
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.2
etsysNatPoolFirstIpAddr
The assigned IP address represents the first IP address in
the range for this NAT Pool entry.
OctetStringr/w
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.3
etsysNatPoolLastIpAddr
The assigned IP address represents the last IP address in the
range for this NAT Pool entry.
OctetStringr/w
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.4
etsysNatPoolPrefixLen
The length of the IP network mask used to refine the range of
IP addresses defined by etsysNatPoolFirstIpAddr and
etsysNatPoolLastIpAddr in defining the range of IP addresses
for this NAT Pool entry. The values for t…
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.5
etsysNatPoolNextIpAddr
The Next NAT IP address that the pool is due to assign to a
dynamic translation binding
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.6
etsysNatPoolAddrCount
The total number of IP addresses assigned to this NAT Pool
entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.7
etsysNatPoolAddrUsed
The total number of IP addresses in use for this NAT Pool
entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.8
etsysNatPoolAddrAlloc
The total number of IP addresses allocated for this NAT Pool
entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.9
etsysNatPoolOutOfAddrs
The number of times an allocation of a Pool entry failed
because there were no available NAT IP addresses for this NAT
Pool entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.10
etsysNatPoolPortAlloc
The total number of Port Maps allocated for this Nat Pool
entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.11
etsysNatPoolOutOfPorts
The number of times an allocation of a Pool entry failed
because there were no available NAT Port Maps for this NAT
Pool entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.12
etsysNatPoolConns
The current number of active NAT connections established
using this NAT Pool entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.13
etsysNatPoolHits
The total number of hits this NAT Pool has received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.14
etsysNatPoolListRulesCount
The total number of List Rules (etsysNatListPoolName)
configured using this Nat Pool entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.15
etsysNatPoolLsnatVservers
The number of Virtual Servers
(etsysLsnatVserverSourceNatPool) using this Nat Pool.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.16
etsysNatPoolRowStatus
This object permits management of the table by facilitating
actions such as row creation and deletion.

The value of this object has no effect on whether other objects
in the conceptual row can be modified…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5624.1.2.75.2.2.1.17

etsysNatListRuleTable

table
.1.3.6.1.4.1.5624.1.2.75.2.3 · 1 row entry · 11 columns
Open in standard view
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysNatListRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-NAT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-NAT-MIB::etsysNatListRuleTable' 
A table of entries defining the operational characteristics
of NAT Lists rules.
etsysNatListRuleEntry row .1.3.6.1.4.1.5624.1.2.75.2.3.1
An entry in the etsysNatListRuleTable containing the
operational characteristics of a NAT List rule. A NAT List
rule defines the operational characteristics for the forming
of dynamic address bindings from a pre-confi…
Indexes
Column Syntax OID
etsysNatListRuleInetVersion
The Internet address version of the NAT List rule. The value
of etsysNatListRuleInetVersion must be consistent with the
value of etsysNatPoolAddressType defined by the
etsysNatPoolName associated with this etsysNatLi…
INET-ADDRESS-MIBInetVersion
Type Values:
0unknown
1ipv4
2ipv6
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.1
etsysNatListRuleDirection
This value identifies if this NAT List rule is associated with
an 'inside' or 'outside' network.
Enumeration
Enumerated Values:
1inside
2outside
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.2
etsysNatListRuleMatchType
This value identifies if this NAT List rule is associated with
a 'source' or 'destination' packet.
Enumeration
Enumerated Values:
1source
2destination
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.3
etsysNatListRuleName
This object contains the unique name of the access-list of IP
addresses to translate for the inside source address defined by
this NAT List rule.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.4
etsysNatListRuleInsideVrfName
This object contains the unique name of the Inside VRF for
cross VRF NAT for this NAT List rule.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.5
etsysNatListRulePoolName
This object contains the unique name of the NAT Pool. This
value must be set with the row status set that creates the
entry. The value may not be changed after the row is created.
OctetStringr/w
Constraints:
range: 1-63
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.6
etsysNatListRuleIfIndex
The outside NAT List rule interface index used for this NAT
List rule entry. A value of '0' indicates that this List Rule
would apply to 'any' interface. This value must be set with the
row status set that creates t…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.7
etsysNatListRuleOverloaded
This entry indicates if this NAT List rule entry will be
overloaded enabling Network Address Port Translation (NAPT).
This value must be set with the row status set that creates
the entry. The value may not be change…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.8
etsysNatListRuleConns
The current number of active NAT connections established on
this NAT List rule entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.9
etsysNatListRuleHits
The total number of hits this NAT List rule entry has
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.10
etsysNatListRuleRowStatus
This object permits management of the table by facilitating
actions such as row creation and deletion.

The value of this object has no effect on whether other objects
in the conceptual row can be modified…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5624.1.2.75.2.3.1.11

etsysNatStaticRuleTable

table
.1.3.6.1.4.1.5624.1.2.75.2.4 · 1 row entry · 14 columns
Open in standard view
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysNatStaticRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-NAT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-NAT-MIB::etsysNatStaticRuleTable' 
A table of entries defining the operational characteristics
of NAT Static rules.
etsysNatStaticRuleEntry row .1.3.6.1.4.1.5624.1.2.75.2.4.1
An entry in the etsysNatStaticRuleTable containing the
operational characteristics of a NAT Static rule. A NAT Static
rule defines a range of private (inside) IP addresses and
operational characteristics for which sp…
Indexes
Column Syntax OID
etsysNatStaticRuleAddressType
The Internet Protocol version. The value of this property
affects the size and format of: etsysNatStaticRuleLocalIpAddr,
and etsysNatStaticRuleGlobalIpAddr both objects must be of the
same INET Address Type.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.1
etsysNatStaticRuleDirection
This value identifies if this NAT Static rule is associated
with an 'inside' or 'outside' network.
Enumeration
Enumerated Values:
1inside
2outside
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.2
etsysNatStaticRuleMatchType
This value identifies if this NAT List rule is associated with
a 'source' or 'destination' packet.
Enumeration
Enumerated Values:
1source
2destination
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.3
etsysNatStaticRuleProtocol
This object contains the NAT Binding protocol type. A value
of '0' indicates that the protocol type is 'any' and requires
that etsysNatStaticRuleLocalPort and
etsysNatStaticRuleGlobalPort be set to a value of '0'. A…
Enumeration
Enumerated Values:
0any
6tcp
17udp
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.4
etsysNatStaticRuleLocalIpAddr
The NAT Static Local rule IP addresses representing the local
IP address for this NAT Static rule entry.
OctetString
Constraints:
range: 4-4
range: 16-16
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.5
etsysNatStaticRuleLocalPort
The NAT Static Local rule port representing the local port
for this NAT Static rule entry. This value is only meaningful
if the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17)
otherwise this value must be set…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.6
etsysNatStaticRuleGlobalIpAddr
The NAT Static Global rule IP addresses representing the
global IP address for this NAT Static rule entry.
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.7
etsysNatStaticRuleGlobalPort
The NAT Static Global rule port representing the global port
for this NAT Static rule entry. This value is only meaningful
if the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17)
otherwise this value must be s…
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.8
etsysNatStaticRuleInsideVrfName
This object contains the unique name of the Inside VRF for
cross VRF NAT.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.9
etsysNatStaticRuleOverloaded
This entry indicates if this NAT Static rule entry is
overloaded enabling Network Address Port Translation (NAPT).
If the etsysNatStaticRuleProtocol is set to tcp(6) or udp(17)
this value will display true(1) otherwise…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.10
etsysNatStaticRuleConns
The current number of active NAT connections established on
this NAT Static rule entry.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.11
etsysNatStaticRuleHits
The total number of hits this NAT Static rule entry has
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.12
etsysNatStaticRuleReservedBindingId
This value is a unique NAT Static rule binding identifier
reserved by NAT at the creation of this Static rule entry.
A value of '0' indicates that there is no binding
identifier currently set for this static entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.13
etsysNatStaticRuleRowStatus
This object permits management of the table by facilitating
actions such as row creation and deletion.

The value of this object has no effect on whether other objects
in the conceptual row can be modified…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.5624.1.2.75.2.4.1.14

etsysNatBindingTable

table
.1.3.6.1.4.1.5624.1.2.75.2.5 · 1 row entry · 24 columns
Open in standard view
Uses the enterasys variant from /opt/observium/mibs/enterasys.
Command help
Walk etsysNatBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-NAT-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-NAT-MIB::etsysNatBindingTable' 
A table of entries defining active NAT bindings.
etsysNatBindingEntry row .1.3.6.1.4.1.5624.1.2.75.2.5.1
An entry in the etsysNatBindingTable defining an active NAT
binding. The etsysNatBindingEntry defines the runtime
characteristics of a NAT binding.
Indexes
Column Syntax OID
etsysNatBindingId
This value is a unique NAT binding identifier assigned by
NAT during binding creation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.1
etsysNatBindingState
This object contains the state of the binding.
- `init', indicates this binding is initializing.
- `syncing', indicates this binding is syncing.
- `waitroute', indicates this binding is in a wait
route state.
- `esta…
Enumeration
Enumerated Values:
1init
2syncing
3waitroute
4established
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.2
etsysNatBindingAddressType
The Internet Protocol version. The value of this property
affects the size and format of:
etsysNatBindingForwardSrcIp, etsysNatBindingForwardDstIp,
etsysNatBindingReverseSrcIp and etsysNatBindingReverseDstIp
object…
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.3
etsysNatBindingForwardSrcIp
The forward source IP address for this NAT binding entry.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.4
etsysNatBindingForwardSrcPort
The forward source port for this NAT binding entry. This
value is only meaningful if the etsysNatBindingProtocol is set
to tcp(6) or udp(17) otherwise this object will return a value
of '0'.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.5
etsysNatBindingForwardDstIp
The forward destination IP address for this NAT binding
entry.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.6
etsysNatBindingForwardDstPort
The forward destination port for this NAT binding entry. This
value is only meaningful if the etsysNatBindingProtocol is set
to tcp(6) or udp(17) otherwise this object will return a value
of '0'.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.7
etsysNatBindingReverseSrcIp
The reverse NAT source IP address for this NAT binding entry.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.8
etsysNatBindingReverseSrcPort
The reverse NAT source port for this NAT binding entry. This
value is only meaningful if the etsysNatBindingProtocol is set
to tcp(6) or udp(17) otherwise this object will return a value
of '0'.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.9
etsysNatBindingReverseDstIp
The reverse NAT destination IP address for this NAT binding
entry.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.10
etsysNatBindingReverseDstPort
The reverse NAT destination port for this NAT binding entry.
This value is only meaningful if the etsysNatBindingProtocol
is set to tcp(6) or udp(17) otherwise this object will return
a value of '0'.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.11
etsysNatBindingRuleType
This object contains the NAT Binding Rule type.
- `static', indicates that the NAT binding is static.
- `dynamic', indicates that the NAT binding is dynamic.
- `staticReserved', indicates that the NAT binding is static …
Enumeration
Enumerated Values:
1static
2dynamic
3staticReserved
4dynamicReserved
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.12
etsysNatBindingPoolName
This object contains the name of the NAT Pool
(etsysNatPoolName) associated with this NAT binding.
OctetString
Constraints:
range: 1-63
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.13
etsysNatBindingProtocol
This object contains the NAT Binding protocol type. A value
of '0' indicates that the protocol type is 'any'. Common IP
Protocol values are TCP(6) and UDP(17).
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.14
etsysNatBindingAlgType
This object contains the NAT ALG Binding type.
- `none', indicates that this NAT binding is not an ALG
binding.
- `ftpctrl', indicates that this NAT binding is a FTP control
binding.
- `ftpdata, indicates that thi…
Enumeration
Enumerated Values:
1none
2ftpctrl
3ftpdata
4tftpctrl
5icmpecho
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.15
etsysNatBindingFtpDataChannelCount
This object contains the NAT Binding FTP Data channel. This
value is only significant if the etsysNatBindingAlgType is
ftpctrl(2), otherwise this object will return a value of '0'.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.16
etsysNatBindingIcmpFwdIdent
This object contains the NAT Binding ICMP Forward ID. This
value is only significant if the etsysNatBindingAlgType is
icmpecho(5), otherwise this object will return a value of '0'.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.17
etsysNatBindingIcmpRevIdent
This object contains the NAT Binding ICMP Reverse ID. This
value is only significant if the etsysNatBindingAlgType is
icmpecho(5), otherwise this object will return a value of '0'.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.18
etsysNatBindingHWConns
This object contains the total number of hardware connections
currently active using this NAT binding.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.19
etsysNatBindingCreationDate
The creation date / time for this NAT binding entry.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.20
etsysNatBindingExpirationDate
The expiration date / time for this NAT binding entry.
If the NAT binding expire time (etsysNatBindingExpireTime) is
'0' there is no expiration date and this object will return
the current date / time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.21
etsysNatBindingIdleTime
The consecutive number of seconds this NAT binding entry
has been idle.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.22
etsysNatBindingExpireTime
The number of idle seconds left before this NAT binding
entry will age out. A value of '0' indicates that this NAT
binding will not age out.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.23
etsysNatBindingClear
Setting this object to a value of true(1) will cause this
etsysNatBindingEntry to be deleted from the
etsysNatBindingTable if the corresponding
etsysNatBindingRuleType is 'dynamic(2)' or
'dynamicReserved(4)' otherwis…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5624.1.2.75.2.5.1.24