ENTERASYS-MSTP-MIB
This mib module defines a portion of the SNMP enterprise
MIBs under Enterasys Networks' enterprise OID pertaining to
the Multiple Spanning Tree Protocol defined by IEEE 802.1s.
This MIB is used to manage devices which support MSTP.
It will be supported until a standard IEEE 802.1s MIB has
been defined by the IETF.
- Source file
ENTERASYS-MSTP-MIB- Last revised
- Identity
etsysMstpMIB- Base OID
1.3.6.1.4.1.5624.1.2.28
Imported Objects
| BRIDGE-MIB | BridgeId |
| ENTERASYS-MIB-NAMES | etsysModules |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the enterasys MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ENTERASYS-MSTP-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ENTERASYS-MSTP-MIB::etsysMstpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-MSTP-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-MSTP-MIB::etsysMstpMIB'
Objects (69)
Showing 69 of 69 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.5624.1.2.28 |
||
.1.3.6.1.4.1.5624.1.2.28.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.0 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.5624.1.2.28.1.1.10 |
|
.1.3.6.1.4.1.5624.1.2.28.1.1.11 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.3 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.4 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.4.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.4.1.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.4.1.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.5 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.5.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.5.1.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.5.1.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.6 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.6.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.6.1.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.6.1.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.1.7 |
||
|
OctetString
|
.1.3.6.1.4.1.5624.1.2.28.1.1.8 |
|
|
Unsigned32
|
.1.3.6.1.4.1.5624.1.2.28.1.1.9 |
|
.1.3.6.1.4.1.5624.1.2.28.1.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.2 |
||
|
Unsigned32
|
.1.3.6.1.4.1.5624.1.2.28.1.2.3 |
|
.1.3.6.1.4.1.5624.1.2.28.1.2.4 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1.1 |
|
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1.3 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1.4 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1.5 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1.6 |
||
.1.3.6.1.4.1.5624.1.2.28.1.2.4.1.7 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.10 |
|
|
Unsigned32
|
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.3 |
|
|
Unsigned32
|
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.4 |
|
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.5 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.6 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.7 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.8 |
||
|
OctetString
|
.1.3.6.1.4.1.5624.1.2.28.1.3.1.1.9 |
|
.1.3.6.1.4.1.5624.1.2.28.1.3.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.2.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.3.2.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.5624.1.2.28.1.3.2.1.2 |
|
.1.3.6.1.4.1.5624.1.2.28.1.3.2.1.3 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.3 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.3.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.3.1.1 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.4 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.4.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.28.1.4.4.1.1 |
|
.1.3.6.1.4.1.5624.1.2.28.1.4.4.1.2 |
||
.1.3.6.1.4.1.5624.1.2.28.1.4.4.1.3 |
||
.1.3.6.1.4.1.5624.1.2.28.2 |
||
.1.3.6.1.4.1.5624.1.2.28.2.1 |
||
.1.3.6.1.4.1.5624.1.2.28.2.2 |
Dependencies (10) 8 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- ENTERASYS-MIB-NAMESenterasys
- P-BRIDGE-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- ENTERASYS-MSTP-MIBenterasysselected
Type Definitions (1)
| OctetString |
range: 0..1024 |
Conformance Groups (10)
|
etsysMstpMaxMstId etsysMstpMaxSupportedMsts etsysMstpNumMsts etsysMstpMstiStatus etsysMstpMstIdOfFdb etsysMstpMstIdOfVlan etsysMstpFormatSelector etsysMstpConfigName etsysMstpRevisionLevel etsysMstpConfigDigest
A collection of objects providing configuration support
for the Multiple Spanning Tree Protocol. |
.1.3.6.1.4.1.5624.1.2.28.2.1.1
|
|
|
etsysMstpCistRegionalRootIdentifier etsysMstpCistPathCost etsysMstpMaxHopCount etsysMstpBridgePriority etsysMstpTimeSinceTopologyChange etsysMstpTopologyChangeCount etsysMstpTopologyChangeInProgress etsysMstpDesignatedRoot etsysMstpRootPathCost etsysMstpRootPort
A collection of objects providing bridge-level support
for the Multiple Spanning Tree Protocol. |
.1.3.6.1.4.1.5624.1.2.28.2.1.2
|
|
|
etsysMstpPortPriority etsysMstpPortState etsysMstpPortAdminPathCost etsysMstpPortOperPathCost etsysMstpPortDesignatedRoot etsysMstpPortDesignatedCost etsysMstpPortDesignatedBridge etsysMstpPortDesignatedPort etsysMstpPortRoleValue etsysMstpHelloTime etsysMstpPortHelloTime etsysMstpBoundaryPort
A collection of objects providing port-level support
for the Multiple Spanning Tree Protocol. |
.1.3.6.1.4.1.5624.1.2.28.2.1.3
|
|
|
An object for controlling Auto Edge Detection.
|
.1.3.6.1.4.1.5624.1.2.28.2.1.4
|
|
|
An object for modifying the Hello Time mode.
|
.1.3.6.1.4.1.5624.1.2.28.2.1.5
|
|
|
An object for enabling and disabling the Backup Root feature.
|
.1.3.6.1.4.1.5624.1.2.28.2.1.6
|
|
|
An object for restricting the number of configurable MSTIs.
|
.1.3.6.1.4.1.5624.1.2.28.2.1.7
|
|
|
An object that indicates the reason for an exceptional
non-forwarding condition per port/MSTI. |
.1.3.6.1.4.1.5624.1.2.28.2.1.8
|
|
|
A collection of objects providing support for the
Loop Protect feature. |
.1.3.6.1.4.1.5624.1.2.28.2.1.9
|
|
|
The Loop Protect Event Notification for MSTIs.
|
.1.3.6.1.4.1.5624.1.2.28.2.1.10
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.5624.1.2.28.2.2.1The compliance statement for devices that support the
Multiple Spanning Tree Protocol.
Multiple Spanning Tree Protocol.
Required groups
| mandatory | etsysMstpConfigGroup | |
| mandatory | etsysMstpBridgeGroup | |
| mandatory | etsysMstpPortGroup | |
| optional | etsysMstpAutoEdgeDetectGroup |
Support for this group is optional and only applies to products that support auto edge detection. |
| optional | etsysMstpBridgeHelloTimeGroup |
Support for this group is optional and only applies to products that support multiple hello time modes. |
| optional | etsysMstpBackupRootGroup |
Support for this group is optional and only applies to products that support the Backup Root feature. |
| optional | etsysMstpMaxInstancesGroup |
Support for this group is optional and only applies to products that support the ability to limit the number of configurable MSTIs. |
| optional | etsysMstpNonForwardingReasonGroup |
Support for this group is optional and only applies to products that wish to provide the reasons for exceptional non-forwarding conditions. |
| optional | etsysMstpLoopProtectGroup |
Support for this group is optional and only applies to products that support the Loop Protect feature. |
| optional | etsysMstpLoopProtectNotificationGroup |
Support for this group is optional and only applies to products that support the Loop Protect feature. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.5624.1.2.28.1.0.1 |
This notification indicates that a Loop Protect event
has occurred on a bridge port on an MSTI. |