ENTERASYS-MAC-AUTHENTICATION-MIB
This MIB module defines a portion of the SNMP enterprise
MIBs under Enterasys Networks' enterprise OID pertaining to
MAC-Authentication.
This MIB was designed to be used for authentication using
source MAC addresses received in traffic on ports under
control of MAC-authentication.
The security afforded by this approach is neither the primary
concern nor intent of this MIB. Rather, this MIB provides
a convenient method of associating policy with MAC
addresses and applying that policy when the MAC address
appears on a pre-approved port in the network.
The term MAC-Authentication is used because an authentication
backend mechanism is used to allow the MAC onto the network,
as well as provide authorization information to the switch.
- Source file
ENTERASYS-MAC-AUTHENTICATION-MIB- Last revised
- Identity
etsysMACAuthenticationMIB- Base OID
1.3.6.1.4.1.5624.1.2.25
Imported Objects
| ENTERASYS-MIB-NAMES | etsysModules |
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
Net-SNMP examples using the enterasys MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ENTERASYS-MAC-AUTHENTICATION-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ENTERASYS-MAC-AUTHENTICATION-MIB::etsysMACAuthenticationMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENTERASYS-MAC-AUTHENTICATION-MIB' -M '/opt/observium/mibs/enterasys:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENTERASYS-MAC-AUTHENTICATION-MIB::etsysMACAuthenticationMIB'
Objects (51)
Showing 51 of 51 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.5624.1.2.25 |
||
.1.3.6.1.4.1.5624.1.2.25.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.1.1 |
||
|
|
.1.3.6.1.4.1.5624.1.2.25.1.1.2 |
|
|
|
Integer32
|
.1.3.6.1.4.1.5624.1.2.25.1.1.3 |
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.25.1.1.4 |
|
.1.3.6.1.4.1.5624.1.2.25.1.1.5 |
||
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.25.1.1.6 |
|
|
Enumeration
|
.1.3.6.1.4.1.5624.1.2.25.1.1.7 |
|
.1.3.6.1.4.1.5624.1.2.25.1.2 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.10 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.3 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.4 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.5 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.6 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.7 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.8 |
||
.1.3.6.1.4.1.5624.1.2.25.1.2.1.1.9 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1.1.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1.1.3 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1.1.4 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1.1.5 |
||
.1.3.6.1.4.1.5624.1.2.25.1.3.1.1.6 |
||
.1.3.6.1.4.1.5624.1.2.25.1.4 |
||
.1.3.6.1.4.1.5624.1.2.25.1.4.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.4.1.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.4.1.1.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.4.1.1.2 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5.2 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5.3 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5.3.1 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5.3.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.5624.1.2.25.1.5.3.1.2 |
|
|
OctetString
|
.1.3.6.1.4.1.5624.1.2.25.1.5.3.1.3 |
|
.1.3.6.1.4.1.5624.1.2.25.1.5.3.1.4 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5.3.1.5 |
||
.1.3.6.1.4.1.5624.1.2.25.1.5.3.1.6 |
||
.1.3.6.1.4.1.5624.1.2.25.2 |
||
.1.3.6.1.4.1.5624.1.2.25.2.1 |
||
.1.3.6.1.4.1.5624.1.2.25.2.2 |
Dependencies (18) 8 direct · 10 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- ENTERASYS-MIB-NAMESenterasys
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- P-BRIDGE-MIBrfc
- RMON-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- RFC1271-MIBrfc
- TOKEN-RING-RMON-MIBrfc
- RMON2-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- Q-BRIDGE-MIBrfc
- ENTERASYS-MAC-AUTHENTICATION-MIBenterasysselected
Conformance Groups (8)
Compliance Statements (5)
OID
.1.3.6.1.4.1.5624.1.2.25.2.2.1The compliance statement for devices that support MAC-Authentication.
Required groups
| mandatory | etsysMACAuthenticationSystemGroup | |
| mandatory | etsysMACAuthenticationPortConfigGroup | |
| mandatory | etsysMACAuthenticationMACConfigGroup | |
| optional | etsysMACAuthenticationMACSessionGroup |
Implementation of the etsysMACAuthenticationMACSessionGroup is optional for all agents. If the agent impelments session functionality, then this table should be supported. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMACAuthenticationSystemEnable | readonly | Write access is not required. If read-only is selected, then the default value must be enabled(1). |
|
| etsysMACAuthenticationPortUserNameSignificantBits | readonly |
Integer32
|
Write access is not required. If read-only is selected, then the default value must be 48. If this object is read-write, then the agent performs a two stage authentication where the it attempts to authenticate the masked MAC address if the full MAC address fails to authenticate. |
OID
.1.3.6.1.4.1.5624.1.2.25.2.2.2The compliance statement for devices that support
MAC-Authentication.
MAC-Authentication.
Required groups
| mandatory | etsysMACAuthenticationSystemGroup2 | |
| mandatory | etsysMACAuthenticationPortConfigGroup | |
| mandatory | etsysMACAuthenticationMACConfigGroup | |
| optional | etsysMACAuthenticationMACSessionGroup |
Implementation of the etsysMACAuthenticationMACSessionGroup is optional for all agents. If the agent impelments session functionality, then this table should be supported. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMACAuthenticationSystemEnable | readonly | Write access is not required. If read-only is selected, then the default value must be enabled(1). |
|
| etsysMACAuthenticationPortUserNameSignificantBits | readonly |
Integer32
|
Write access is not required. If read-only is selected, then the default value must be 48. If this object is read-write, then the agent performs a two stage authentication where the it attempts to authenticate the masked MAC address if the full MAC address fails to authenticate. |
OID
.1.3.6.1.4.1.5624.1.2.25.2.2.3The compliance statement for devices that support
MAC-Authentication.
MAC-Authentication.
Required groups
| mandatory | etsysMACAuthenticationSystemGroup3 | |
| mandatory | etsysMACAuthenticationPortConfigGroup | |
| mandatory | etsysMACAuthenticationMACConfigGroup | |
| optional | etsysMACAuthenticationMACSessionGroup |
Implementation of the etsysMACAuthenticationMACSessionGroup is optional for all agents. If the agent impelments session functionality, then this table should be supported. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMACAuthenticationSystemEnable | readonly | Write access is not required. If read-only is selected, then the default value must be enabled(1). |
|
| etsysMACAuthenticationPortUserNameSignificantBits | readonly |
Integer32
|
Write access is not required. If read-only is selected, then the default value must be 48. If this object is read-write, then the agent performs a two stage authentication where the it attempts to authenticate the masked MAC address if the full MAC address fails to authenticate. |
| etsysMACAuthenticationSystemUserNameFormat | readonly |
Enumeration
hyphen(1), none(2)
|
Write access is not required. |
OID
.1.3.6.1.4.1.5624.1.2.25.2.2.4The compliance statement for devices that support
MAC-Authentication.
MAC-Authentication.
Required groups
| mandatory | etsysMACAuthenticationSystemGroup3 | |
| mandatory | etsysMACAuthenticationPortConfigGroup | |
| mandatory | etsysMACAuthenticationMACConfigGroup | |
| optional | etsysMACAuthenticationMACSessionGroup |
Implementation of the etsysMACAuthenticationMACSessionGroup is optional for all agents. If the agent implements session functionality, then this table should be supported. Implementation of the etysMACAuthenticationMACListGroup is optional for all agents. If the agent implements MAC-List functionality, then this table should be supported. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMACAuthenticationSystemEnable | readonly | Write access is not required. If read-only is selected, then the default value must be enabled(1). |
|
| etsysMACAuthenticationPortUserNameSignificantBits | readonly |
Integer32
|
Write access is not required. If read-only is selected, then the default value must be 48. If this object is read-write, then the agent performs a two stage authentication where the it attempts to authenticate the masked MAC address if the full MAC address fails to authenticate. |
| etsysMACAuthenticationSystemUserNameFormat | readonly |
Enumeration
hyphen(1), none(2)
|
Write access is not required. |
| etsysMACAuthenticationMode | readonly |
Enumeration
password(1), radiusUsername(2), macList(3)
|
Write access is not required. |
| etsysMACAuthenticationMACListRowStatus | The states createAndWait, notInService and notReady are not supported for writing. |
OID
.1.3.6.1.4.1.5624.1.2.25.2.2.5The compliance statement for devices that support
MAC-Authentication.
MAC-Authentication.
Required groups
| mandatory | etsysMACAuthenticationSystemGroup4 | |
| mandatory | etsysMACAuthenticationPortConfigGroup | |
| mandatory | etsysMACAuthenticationMACConfigGroup | |
| optional | etsysMACAuthenticationMACSessionGroup |
Implementation of the etsysMACAuthenticationMACSessionGroup is optional for all agents. If the agent implements session functionality, then this table should be supported. |
| optional | etsysMACAuthenticationMACListGroup |
Implementation of the etysMACAuthenticationMACListGroup is optional for all agents. If the agent implements MAC-List functionality, then this table should be supported. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| etsysMACAuthenticationSystemEnable | readonly | Write access is not required. If read-only is selected, then the default value must be enabled(1). |
|
| etsysMACAuthenticationMode | readonly |
Enumeration
password(1), radiusUsername(2), macList(3)
|
Write access is not required. |
| etsysMACAuthenticationSystemUserNameFormat | readonly |
Enumeration
hyphen(1), none(2), colon(3)
|
Write access is not required. |
| etsysMACAuthenticationSystemUserNameCase | readonly |
Enumeration
lower(1), upper(2)
|
Write access is not required. |
| etsysMACAuthenticationMACListRowStatus | The states createAndWait, notInService and notReady are not supported for writing. |