ENTERASYS-ETH-OAM-EXT-MIB Table View

This table contains detailed information about OAM capabilities
for each Ethernet-like interface. There is only one entry per
Ethernet-like interface allowed.

etsysEthOamExtEntry row .1.3.6.1.4.1.5624.1.2.78.1.1.1

An entry in the OAM table containing detailed information
about the OAM function. Each Ethernet-like interface is only
allowed one peer OAM entity. Entries are auotmatically created.

Indexes

IF-MIBifIndex

Column	Syntax	OID
etsysEthOamExtOperStatus This value defines the operational status for the Ethernet-like interface. If the link is operating normally, the value is operational(1). State disabled(2) is entered if an error occurs. Errors that will cause this sta…	Enumerationr/w Enumerated Values: 1 operational 2 disabled	.1.3.6.1.4.1.5624.1.2.78.1.1.1.1

A table that controls extended configuration of Ethernet
OAM Event Notification. This table contains the mechanisms
to define actions to be taken when error thresholds are
reached. There is only one entry per Ethernet-like interface
allowed.

etsysEthOamExtEventConfigEntry row .1.3.6.1.4.1.5624.1.2.78.1.2.1

An entry in the OAM Event Configuration table containing
information on actions to be taken when various link problems
arise. Each Ethernet-like interface is only allowed one entry and
is automatically created.

Indexes

IF-MIBifIndex

Column	Syntax	OID
etsysEthOamExtEventConfigErrSymPeriodActions The bitmap value used to identify which actions should be taken when a Symbol Period error is triggered.	EtsysOamExtErrActionsr/w Type Values: 0 syslog 1 disable	.1.3.6.1.4.1.5624.1.2.78.1.2.1.1
etsysEthOamExtEventConfigErrFramePeriodActions The bitmap value used to identify which actions should be taken when a Frame Period error is triggered.	EtsysOamExtErrActionsr/w Type Values: 0 syslog 1 disable	.1.3.6.1.4.1.5624.1.2.78.1.2.1.2
etsysEthOamExtEventConfigErrFrameActions The bitmap value used to identify which actions should be taken when a Frame error is triggered.	EtsysOamExtErrActionsr/w Type Values: 0 syslog 1 disable	.1.3.6.1.4.1.5624.1.2.78.1.2.1.3
etsysEthOamExtEventConfigErrFrameSecsActions The bitmap value used to identify which actions should be taken when a Frame Seconds error is triggered.	EtsysOamExtErrActionsr/w Type Values: 0 syslog 1 disable	.1.3.6.1.4.1.5624.1.2.78.1.2.1.4
etsysEthOamExtEventConfigErrNotifRetry The number of times to retry an OAM error Event Notification that has not been answered.	Unsigned32r/w Constraints: range: 0-9	.1.3.6.1.4.1.5624.1.2.78.1.2.1.5

A table of objects for Ethernet OAM Unidirectional Link
Detection (ULD) which apply to a group of ports that share
common system resources.

etsysEthOamExtUldGroupEntry row .1.3.6.1.4.1.5624.1.2.78.1.3.1.1

An entry in the OAM ULD group table containing a group index
and values to support per group limits on ULD configuration.

Indexes

etsysEthOamExtUldGroupIndex

Column	Syntax	OID
etsysEthOamExtUldGroupIndex A unique identifier for this ULD port group status.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.1.1.1
etsysEthOamExtUldGroupMaxFastPorts The maximum number of ports in the ULD port group that can be configured for ULD in the FAST mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.1.1.2
etsysEthOamExtUldGroupFastPortsInUse The current number of ports in the ULD port group that are configured for ULD in the FAST mode.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.1.1.3

A table that controls extended configuration of Ethernet
OAM Unidirectional Link Detection (ULD). This table 
contains the mechanisms to define the ULD mode and the
actions to be taken when a unidirectional link is detected

etsysEthOamExtUldPortEntry row .1.3.6.1.4.1.5624.1.2.78.1.3.2.1

An entry in the OAM ULD Port table containing ULD mode,
information on actions to be taken when a unidirectional link
is detected, and the current status of the ULD configuration.
Each Ethernet-like interface is only …

Indexes

IF-MIBifIndex

Column	Syntax	OID
etsysEthOamExtUldPortMode This value defines the mode in which OAM Unidirectional Link Detection (ULD) will operate on the port. If disabled, OAM ULD will not operate on the port. In standard mode, OAM will use the standard OAM Discovery sta…	Enumerationr/w Enumerated Values: 1 disabled 2 standard 3 fast	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.1
etsysEthOamExtUldPortAction This value defines the administrative action taken by OAM if a unidirectional link is detected. If the action is syslogOnly, OAM will generate a syslog message. If the action is disablePort, OAM will generate a syslo…	Enumerationr/w Enumerated Values: 1 syslogOnly 2 disablePort	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.2
etsysEthOamExtUldPortActiveStatus The active status of ULD on the port. The active status depends on the state of the OAM Discovery state machine. It is active when the OAM Discovery state machine is in the SEND_ANY state. The ULD action is only perf…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.3
etsysEthOamExtUldPortFastTimerConfig The time in 100 millisecond tics between transmits of Fast ULD OAMPDUs to use for the local OAM peer. This value will be advertised by the local OAM peer in the Local Fast ULD Information TLV when the Fast ULD state mac…	decisecondsUnsigned32r/w Constraints: range: 2-10	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.4
etsysEthOamExtUldPortActiveFastTimer The time in 100 millisecond tics between transmits of Fast ULD OAMPDUs that is being used by both the local and remote OAM peers when the Fast ULD state machine is in the SEND_FAST state. This time is negotiated by the…	decisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.5
etsysEthOamExtUldPortActiveFastStatus The active status of Fast ULD on the port. The active status of Fast ULD depends on the configured ULD mode, the state of the OAM Discovery state machine, and the state of the Fast ULD state machine. Fast ULD is notAc…	Enumeration Enumerated Values: 1 notActive 2 activeSlow 3 activeFast 4 faultDetected	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.6
etsysEthOamExtUldPortOperStatus The operational status of the port with respect to ULD. The status is disabled(2) only if the disablePort action is configured and a unidirectional link is detected. Otherswise, the status is operational(1). Setting t…	Enumerationr/w Enumerated Values: 1 operational 2 disabled	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.7
etsysEthOamExtUldPortFastTxCount The total number of Information OAMPDUs with Fast ULD Information TLVs transmitted by the port OAM peer since reboot. This value SHOULD NOT be maintained across reboot.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.8
etsysEthOamExtUldPortFastRxCount The total number of Information OAMPDUs with a Fast ULD Information TLVs received by this port's OAM peer since reboot. This value SHOULD NOT be maintained across reboot.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.9
etsysEthOamExtUldPortFastRxErrorCount The total number of Information OAMPDUs with an Invalid Fast ULD Information TLV received by this port's OAM peer since reboot. This value SHOULD NOT be maintained across reboot.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.10
etsysEthOamExtUldPortLastFastRxTime The value of aTimeSinceSystemReset (F.2.1) when the last Information OAMPDU with a Fast ULD Information TLV was received by this port's OAM peer. This value SHOULD NOT be maintained across reboot.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.11
etsysEthOamExtUldPortGroupIndex The ULD port group index for this port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.12
etsysEthOamExtUldPortActiveOamMode The active OAM mode for the port. When a port is configured in the passive OAM mode and ULD is enabled in the standard or fast ULD mode, the passive mode is superceeded by this value. The port will operate as though …	Enumeration Enumerated Values: 1 passive 2 active	.1.3.6.1.4.1.5624.1.2.78.1.3.2.1.13