ENERGY-OBJECT-MIB

Monitored by Observium

        Copyright (c) 2015 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
        
This MIB is used to monitor power and energy in
devices.
        
The tables eoMeterCapabilitiesTable and eoPowerTable
are a sparse extension of the eoTable from the
ENERGY-OBJECT-CONTEXT-MIB.  As a requirement,
[RFC7461] SHOULD be implemented.
        
Module Compliance of ENTITY-MIB v4 with respect to
entity4CRCompliance MUST be supported which requires
implementation of 4 MIB objects: entPhysicalIndex,
entPhysicalClass, entPhysicalName and entPhysicalUUID.

Observium actively monitors this MIB

Observium uses this MIB in discovery or polling workflows on applicable devices.

Status

Explore Observium network monitoring

Source file: ENERGY-OBJECT-MIB
Last revised: 9 Feb 2015, 00:00 UTC
Identity: energyObjectMib
Base OID: 1.3.6.1.2.1.229

Imported Objects

ENTITY-MIB	entPhysicalIndex
IANAPowerStateSet-MIB	PowerStateSet
RMON-MIB	OwnerString
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	Counter32 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks Unsigned32
SNMPv2-TC	RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeInterval TimeStamp TruthValue

Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'ENERGY-OBJECT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ENERGY-OBJECT-MIB::energyObjectMib'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENERGY-OBJECT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENERGY-OBJECT-MIB::energyObjectMib'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (50)

1 directly used by Observium

energyObjectMib		`.1.3.6.1.2.1.229`
energyObjectMibNotifs		`.1.3.6.1.2.1.229.0`
eoPowerEnableStatusNotification r/w	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.229.0.1`
energyObjectMibObjects		`.1.3.6.1.2.1.229.1`
eoMeterCapabilitiesTable		`.1.3.6.1.2.1.229.1.1`
eoMeterCapabilitiesEntry	ENTITY-MIBentPhysicalIndex	`.1.3.6.1.2.1.229.1.1.1`
eoMeterCapability	Bits	`.1.3.6.1.2.1.229.1.1.1.1`
eoPowerTable		`.1.3.6.1.2.1.229.1.2`
eoPowerEntry	ENTITY-MIBentPhysicalIndex	`.1.3.6.1.2.1.229.1.2.1`
eoPower	wattsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.229.1.2.1.1`
eoPowerStateEnterReason r/w	RMON-MIBOwnerString	`.1.3.6.1.2.1.229.1.2.1.10`
eoPowerNameplate	wattsSNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.2.1.2`
eoPowerUnitMultiplier	UnitMultiplier	`.1.3.6.1.2.1.229.1.2.1.3`
eoPowerAccuracy	hundredths of percentInteger32	`.1.3.6.1.2.1.229.1.2.1.4`
eoPowerMeasurementCaliber	Enumeration	`.1.3.6.1.2.1.229.1.2.1.5`
eoPowerCurrentType	Enumeration	`.1.3.6.1.2.1.229.1.2.1.6`
eoPowerMeasurementLocal	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.229.1.2.1.7`
eoPowerAdminState r/w	IANAPowerStateSet-MIBPowerStateSet	`.1.3.6.1.2.1.229.1.2.1.8`
eoPowerOperState OBS ✓	IANAPowerStateSet-MIBPowerStateSet	`.1.3.6.1.2.1.229.1.2.1.9`
eoPowerStateTable		`.1.3.6.1.2.1.229.1.3`
eoPowerStateEntry	ENTITY-MIBentPhysicalIndexeoPowerStateIndex	`.1.3.6.1.2.1.229.1.3.1`
eoPowerStateIndex	IANAPowerStateSet-MIBPowerStateSet	`.1.3.6.1.2.1.229.1.3.1.1`
eoPowerStateMaxPower	wattsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.229.1.3.1.2`
eoPowerStatePowerUnitMultiplier	UnitMultiplier	`.1.3.6.1.2.1.229.1.3.1.3`
eoPowerStateTotalTime	SNMPv2-SMITimeTicks	`.1.3.6.1.2.1.229.1.3.1.4`
eoPowerStateEnterCount	SNMPv2-SMICounter32	`.1.3.6.1.2.1.229.1.3.1.5`
eoEnergyParametersTable		`.1.3.6.1.2.1.229.1.4`
eoEnergyParametersEntry	ENTITY-MIBentPhysicalIndexeoEnergyParametersIndex	`.1.3.6.1.2.1.229.1.4.1`
eoEnergyParametersIndex	Integer32	`.1.3.6.1.2.1.229.1.4.1.2`
eoEnergyParametersIntervalLength r/w	SNMPv2-TCTimeInterval	`.1.3.6.1.2.1.229.1.4.1.3`
eoEnergyParametersIntervalNumber r/w	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.4.1.4`
eoEnergyParametersIntervalMode r/w	Enumeration	`.1.3.6.1.2.1.229.1.4.1.5`
eoEnergyParametersIntervalWindow r/w	SNMPv2-TCTimeInterval	`.1.3.6.1.2.1.229.1.4.1.6`
eoEnergyParametersSampleRate r/w	MillisecondsSNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.4.1.7`
eoEnergyParametersStorageType r/w	SNMPv2-TCStorageType	`.1.3.6.1.2.1.229.1.4.1.8`
eoEnergyParametersStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.229.1.4.1.9`
eoEnergyTable		`.1.3.6.1.2.1.229.1.5`
eoEnergyEntry	eoEnergyParametersIndexeoEnergyCollectionStartTime	`.1.3.6.1.2.1.229.1.5.1`
eoEnergyCollectionStartTime	hundredths of a secondSNMPv2-SMITimeTicks	`.1.3.6.1.2.1.229.1.5.1.1`
eoEnergyConsumed	Watt-hoursSNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.5.1.2`
eoEnergyProvided	Watt-hoursSNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.5.1.3`
eoEnergyStored	Watt-hoursSNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.5.1.4`
eoEnergyUnitMultiplier	UnitMultiplier	`.1.3.6.1.2.1.229.1.5.1.5`
eoEnergyAccuracy	hundredths of percentInteger32	`.1.3.6.1.2.1.229.1.5.1.6`
eoEnergyMaxConsumed	Watt-hoursSNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.5.1.7`
eoEnergyMaxProduced	Watt-hoursSNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.229.1.5.1.8`
eoEnergyDiscontinuityTime	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.229.1.5.1.9`
energyObjectMibConform		`.1.3.6.1.2.1.229.2`
energyObjectMibCompliances		`.1.3.6.1.2.1.229.2.1`
energyObjectMibGroups		`.1.3.6.1.2.1.229.2.2`

Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

ENERGY-OBJECT-MIBrfcselected
- ENTITY-MIBrfc1 symbol
  - IANA-ENTITY-MIBrfc1 symbol
    - SNMPv2-SMIrfc2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMP-FRAMEWORK-MIBrfc1 symbol
    - SNMPv2-CONFrfc2 symbols
      - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared5 symbols
  - SNMPv2-TCrfcshared8 symbols
  - UUID-TC-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfcshared1 symbol
- IANAPowerStateSet-MIBrfc1 symbol
  - SNMPv2-SMIrfcshared2 symbols
  - SNMPv2-TCrfcshared1 symbol
- RMON-MIBrfc1 symbol
  - SNMPv2-CONFrfcshared3 symbols
  - SNMPv2-SMIrfcshared8 symbols
  - SNMPv2-TCrfcshared2 symbols
- SNMPv2-CONFrfcshared3 symbols
- SNMPv2-SMIrfcshared8 symbols
- SNMPv2-TCrfcshared6 symbols

Dependency-first compile order

Type Definitions (1)

UnitMultiplier	Enumeration	`yocto(-24)` `zepto(-21)` `atto(-18)` `femto(-15)` `pico(-12)` `nano(-9)` `micro(-6)` `milli(-3)` `units(0)` `kilo(3)` `mega(6)` `giga(9)` `tera(12)` `peta(15)` `exa(18)` `zetta(21)` `yotta(24)`

Conformance Groups (7)

energyObjectMibTableGroup	eoPower eoPowerNameplate eoPowerUnitMultiplier eoPowerAccuracy eoPowerMeasurementCaliber eoPowerCurrentType eoPowerMeasurementLocal eoPowerAdminState eoPowerOperState eoPowerStateEnterReason This group contains the collection of all the objects related to the Energy Object.	`.1.3.6.1.2.1.229.2.2.1`
energyObjectMibStateTableGroup	eoPowerStateMaxPower eoPowerStatePowerUnitMultiplier eoPowerStateTotalTime eoPowerStateEnterCount This group contains the collection of all the objects related to the Power State.	`.1.3.6.1.2.1.229.2.2.2`
energyObjectMibEnergyParametersTableGroup	eoEnergyParametersIntervalLength eoEnergyParametersIntervalNumber eoEnergyParametersIntervalMode eoEnergyParametersIntervalWindow eoEnergyParametersSampleRate eoEnergyParametersStorageType eoEnergyParametersStatus This group contains the collection of all the objects related to the configuration of the Energy Table.	`.1.3.6.1.2.1.229.2.2.3`
energyObjectMibEnergyTableGroup	eoEnergyConsumed eoEnergyProvided eoEnergyStored eoEnergyUnitMultiplier eoEnergyAccuracy eoEnergyMaxConsumed eoEnergyMaxProduced eoEnergyDiscontinuityTime This group contains the collection of all the objects related to the Energy Table.	`.1.3.6.1.2.1.229.2.2.4`
energyObjectMibMeterCapabilitiesTableGroup	eoMeterCapability This group contains the object indicating the capability of the Energy Object	`.1.3.6.1.2.1.229.2.2.5`
eoPowerEnableStatusNotificationGroup	eoPowerEnableStatusNotification The collection of objects that are used to enable notification.	`.1.3.6.1.2.1.229.2.2.6`
energyObjectMibNotifGroup	eoPowerStateChange This group contains the notifications for the Monitoring and Control MIB for Power and Energy.	`.1.3.6.1.2.1.229.2.2.7`

Compliance Statements (2)

OID .1.3.6.1.2.1.229.2.1.1

When this MIB is implemented with support for
read-create, then such an implementation can
claim full compliance. Such devices can then
be both monitored and configured with this MIB.

Module Compliance of RFC 6933
with respect to entity4CRCompliance MUST
be supported, which requires implementation
of four MIB objects: entPhysicalIndex, entPhysicalClass,
entPhysicalName and entPhysicalUUID.

Required groups

mandatory	energyObjectMibTableGroup
mandatory	energyObjectMibStateTableGroup
mandatory	eoPowerEnableStatusNotificationGroup
mandatory	energyObjectMibNotifGroup
optional	energyObjectMibEnergyTableGroup	A compliant implementation does not have to implement.
optional	energyObjectMibEnergyParametersTableGroup	A compliant implementation does not have to implement.
optional	energyObjectMibMeterCapabilitiesTableGroup	A compliant implementation does not have to implement.

OID .1.3.6.1.2.1.229.2.1.2

When this MIB is implemented without support for
read-create (i.e., in read-only mode), then such an
implementation can claim read-only compliance. Such a
device can then be monitored but cannot be
configured with this MIB.

Module Compliance of [RFC6933] with respect to
entity4CRCompliance MUST be supported which requires
implementation of 4 MIB objects: entPhysicalIndex,
entPhysicalClass, entPhysicalName and entPhysicalUUID.