EMAP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
46
Rows
46
Columns
532

hwSiteActiveAlarmTable

table
.1.3.6.1.4.1.2011.6.164.1.1.2.99 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteActiveAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteActiveAlarmTable'
hwSiteActiveAlarmEntry row .1.3.6.1.4.1.2011.6.164.1.1.2.99.1
Indexes
Column Syntax OID
hwActiveAlarmIndex
Site active alarm table index. It is the unique ID of the site alarm.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.1
hwActiveAlarmText
Active alarm name. It is of the character string type, and used to specify the content of a specific alarm.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.2
hwActiveAlarmLevel
Active alarm level, which users can configure the alarm severity, is an enumeration type:
If the enumeration value is 1, it indicates a critical alarm;
If the enumeration value is 2, it indicates a major alarm;
If the e…
Enumeration
Enumerated Values:
1critical
2major
3minor
4warning
255unknown
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.3
hwActiveAlarmSigDesc
Active alarm signal description. It is used to add and describe alarm content. Users can define the description of the alarm.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.4
hwActiveAlarmTime
Active alarm time. It is of the character string type, and used to specify the content of a specific alarm.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.5
hwSMUSiteName
Site name, which users can configure, is used to specify a site. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.6
hwSMUSiteAdminAddr
Site administrant address, which users can assigned, is the unique ID of a site. It is used for device management by NMS, and value range is 0 to 65535.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.7
hwSMUNetIdentifier
NE ID. It is of the character string type. It is the unique ID of the site (an independent network element (NE)) on the network. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.8
hwSMUSiteDescription
Site description. It is of the character string type. It is used to describe the site information such as the site location, which users can configure. Otherwise, the configured character can not be any other languages…
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.9
hwEquipId
Equipment ID. Value range: 000,000 to 000,100, in which the first three digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.10
hwEquipName
Equipment name. It is of the character string type, and users can set the name of the monitor.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.11
hwActiveAlarmRowStatus
Rowstatus of active alarm table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.1.2.99.1.100

hwSiteAlarmTable

table
.1.3.6.1.4.1.2011.6.164.1.1.2.100 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteAlarmTable' 
/
hwSiteAlarmEntry row .1.3.6.1.4.1.2011.6.164.1.1.2.100.1
/
Indexes
Column Syntax OID
hwAlarmIndex
Site alarm table index. It is the unique ID of the site alarm.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.6.164.1.1.2.100.1.1
hwAlarmText
Alarm name. It is of the character string type, and used to specify the content of a specific alarm.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.1.2.100.1.2
hwAlarmLevel
Alarm level, which users can configure the alarm severity, is an enumeration type:
If the enumeration value is 1, it indicates a critical alarm;
If the enumeration value is 2, it indicates a major alarm;
If the enumerat…
Enumerationr/w
Enumerated Values:
1critical
2major
3minor
4warning
255unknown
 .1.3.6.1.4.1.2011.6.164.1.1.2.100.1.3
hwAlarmSigDesc
Alarm signal description. It is used to add and describe alarm content. Users can define the description of the alarm.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.1.2.100.1.4
hwAlarmRowStatus
RowStatus of site alarms table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.1.2.100.1.100

hwMonitorTable

table
.1.3.6.1.4.1.2011.6.164.1.2.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwMonitorTable' 
/
hwMonitorEntry row .1.3.6.1.4.1.2011.6.164.1.2.2.1.1
/
Indexes
Column Syntax OID
hwMonIndex
Table index of the site monitors (hwSiteMonitorTable) is restricted by the quantity of the site monitors (hwMonsQuantity).
Value range: 1 to 100.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.1
hwMonEquipId
Site monitor ID.
Value range: 001,001 to 001,100, in which the first three digits indicate the device type and the last three digits indicate the device SN.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.2
hwMonEquipName
Monitor name. It is of the character string type, and users can set the name of the monitor.
Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.3
hwMonEquipDescription
Monitor description. It is of the character string type. Users can set the description of the monitor.
Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.4
hwMonEquipSoftwareVersion
Monitor software version. It is of the character string type.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.5
hwMonEquipPcbVersion
Monitor printed circuit board (PCB) hardware version. It is of the character string type.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.6
hwMonEquipManufacturer
Monitor manufacture. It is of the character string type, and is an inherent attribute of the device.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.7
hwMonEquipManuDate
Monitor production date. It is of the character string type, and is an inherent attribute of the device.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.8
hwMonEquipSerialNo
Production SN of the monitor. It is the electronic tag of the products.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.9
hwMonEquipOperTotalTime
Total monitor runtime. The monitor counts the data in real time.
Value range is 0 to 65535,
The value is an integer (1),
Units:hours. (h).
It is used for performance measurement and evaluation of the monitor.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.10
hwSetMonEquipCtrlState
Monitor control status. It is an enumeration type:
If the enumeration value is 1, it indicates the background control;
If the enumeration value is 2, it indicates the automatic control.
If the enumeration value is 255, …
Enumerationr/w
Enumerated Values:
1manualMode
2autoMode
255unknown
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.11
hwCtrlMonEquipReset
Warm-reset control of the monitor. It is an enumeration type:
If the enumeration value is 1, it indicates the Warm-reset control of the monitor is normal;
If the enumeration value is 2, it indicates the Warm-reset contr…
Enumerationr/w
Enumerated Values:
1normal
2reset
255unknown
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.12
hwMonitorOperStatus
State of the site monitor module. It is an enumeration type:
If the enumeration value is 1, it indicates that the site monitor module is in the normal state;
If the enumeration value is 2, it indicates that the monitor…
Enumeration
Enumerated Values:
1normal
2commRs485Fail
3commNetFail
4fault
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.99
hwMonRowStatus
RowStatus of site monitor.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.2.2.1.1.100

hwRectConfigTable

table
.1.3.6.1.4.1.2011.6.164.1.3.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRectConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwRectConfigTable' 
Rectifier config information table. Use this table to get rectifiers equipment ID, software version, manufacturer, rated current, efficency, AC input type, and to control equipment on or off. 
This table's index is hwRectConfigIndex, clone Rectifier config information table.
hwRectConfigEntry row .1.3.6.1.4.1.2011.6.164.1.3.2.1.1
Rectifier config information table. Use this table to get rectifiers equipment ID, software version, manufacturer, rated current, efficency, AC input type, and to control equipment on or off.
This table's index is hwRe…
Indexes
Column Syntax OID
hwRectConfigIndex
Index of the device configuration list for the rectifier modules, which value range: 1 to 256(To the actual subject). Lines of the device list are restricted by the total quantity of the rectifier modules (hwRectsTotalQ…
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.1
hwRectEquipId
Rectifier module ID. Value range: 002'001 to 002'255. The first digits indicate the device type and last three digits indicate the device SN.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.2
hwRectEquipName
Device name of the rectifier module, character string type, is used to specify the rectifier module. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.3
hwRectType
Specific type of the rectifier module. It is an enumeration type:
If the enumeration value is 1, it indicates a 5A rectifier module;
If the enumeration value is 2, it indicates a 15A rectifier module;
If the enumerati…
Enumeration
Enumerated Values:
1eps5
2eps15
3eps30
4eps50
5eps100
255unknown
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.4
hwRectSoftwareVersion
Software version of the rectifier module. It indicates the software version ID of the module.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.5
hwRectManufacturer
Manufacture of the rectifier module.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.6
hwRectManuDate
Manufacture date of rectifiers is of string type.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.7
hwRectSerialNo
Rectifier module SN. It indicates the electronic tag of the product.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.8
hwRectRatedCurrent
Rated voltage of the rectifier module, is an inherent attribute.
Value range: 0 to 200, Units: A, and the value is accurate to one decimal place (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Unsigned32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.9
hwRectEfficency
Efficiency of the rectifier module, is an inherent attribute.
Value range: 0 to 100,
Units: %,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.10
hwRectInputAcType
Input AC type of the rectifier module. It is an enumeration value:
If the value of the node is 1, it indicates single-phase AC input;
If the value of the node is 2, it indicates three-phase AC input;
If the value of th…
Enumeration
Enumerated Values:
1single
2triple
3threeLivelines
4doubleLiveLines
255unknown
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.11
hwCtrlRectOnOff
Power-on or power-off of the rectifier module, is an enumeration value. Users can modify the enumeration value of this node, thus controlling of the power-on or power-off of the rectifier module:
If the NMS notifies the…
Enumerationr/w
Enumerated Values:
1on
2off
255nullOper
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.12
hwRectConfigRowStatus
RowStatus of rectifier config table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.3.2.1.1.100

hwRectOperTable

table
.1.3.6.1.4.1.2011.6.164.1.3.2.2 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwRectOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwRectOperTable' 
Rectifier runing information table. Use this table to get rectifiers output current, output voltage, totle runing time, and current run status. 
This table's index is hwRectRunIndex, clone rectifier runing information table.
hwRectOperEntry row .1.3.6.1.4.1.2011.6.164.1.3.2.2.1
Rectifier runing information table. Use this table to get rectifiers output current, output voltage, totle runing time, and current run status.
This table's index is hwRectRunIndex, clone rectifier runing information t…
Indexes
Column Syntax OID
hwRectOperIndex
Table index of the running rectifier modules,
which value range: 1 to 256(To the actual subject).
Lines of the device list are restricted by the total quantity of the rectifier modules (hwRectsTotalQuantity).
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.1
hwRectOutputCurrent
Output current of the rectifier module. It is a real-time analog parameter.
Value range: 0 to 300,
Units: A,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates …
Unsigned32
Constraints:
range: 0-3000
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.2
hwRectOutputVoltage
Output voltage of the rectifier module. It is a real-time analog parameter.
Value range: 0 to 65,
Units: V,
the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that …
Unsigned32
Constraints:
range: 0-650
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.3
hwRectTotalOperTime
Total runtime of the rectifier module.
Value units: minute (m),
and the value is an integer (1).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.4
hwRectDCOutputPower
DC output power.
Value range: 0 to 30000,
units: W,
and the value is an integer.(1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-30000
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.5
hwRectACVoltage
AC input voltage.
Value range: 0 to 600,
units: V,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-6000
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.6
hwRectRatedEfficiency
Rated Efficiency.
Value range: 0 to 100,
units: %,
and the value is an integer.(1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.7
hwRectifierTemperature
Rectifier Temperature.
Value range: -300 to 300,
units: degC,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -3000-3000
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.8
hwRectOperStatus
State of the rectifier module. It is an enumeration type:
If the enumeration value is 1, the rectifier module is in the normal state;
If the enumeration value is 2, a fault occurs on the rectifier module;
If the enume…
Enumeration
Enumerated Values:
1normal
2fault
3protect
4commFail
5switchOff
6invalid
7noConfig
8acOff
9rectLost
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.99
hwRectOperRowStatus
RowStatus of rectifier runing table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.3.2.2.1.100

hwBattsTestResultTable

table
.1.3.6.1.4.1.2011.6.164.1.4.3.100 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBattsTestResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwBattsTestResultTable' 
Battery test result record table. 
Use this table to get battery test inital time, test result, battery efficiency, battery discharge time, terminated voltage, average current, discharge AH value, test temperature and test terminated course. 
This table's index is hwBattsTestResultIndex, clone Battery test result record table.
hwBattsTestResultEntry row .1.3.6.1.4.1.2011.6.164.1.4.3.100.1
Battery test result record table.
Use this table to get battery test inital time, test result, battery efficiency, battery discharge time, terminated voltage, average current, discharge AH value, test temperature and t…
Indexes
Column Syntax OID
hwBattsTestResultIndex
Table index of the battery test results. Currently up to 10 times of the battery test results are saved by default.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.1
hwBattsTestType
Record test type of the battery test. It is an enumeration value:
If the NMS notifies the SNMP agent that this node is set to 1, it indicates a manual test;
If the NMS notifies the SNMP agent that this node is set to …
Enumeration
Enumerated Values:
1manualTest
2acOffAutoTest
3timedTest
4shortTest
255unknown
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.2
hwBattsTestStartTime
Test start time of the record in the battery test. It is of the character string type.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.3
hwBattsTestResult
Battery test result. It is an enumeration value.
If the enumeration value of the node is 1, it indicates that the battery test has no result:
If the enumeration value of the node is 2, it indicates that the battery is …
Enumeration
Enumerated Values:
1battNoResult
2battNormal
3battPreAlarm
4battAlarm
255unknown
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.4
hwBattsEfficiency
Battery efficiency test.
Value range: 0 to 100,
Units: %,
and the value is an integer (1).
If the value is -1, it indicates that the test value is inefficient.
If the value is 255, it indicates that the test valu…
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.5
hwBattsDischargeTime
Discharge time of the battery test records.
Value range: 0 to 100,
units: hour (h),
and the value is accurate to two decimal places (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inva…
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.6
hwBattsDischargeEndVoltage
Discharge termination voltage of the battery test.
Value range: 0 to 60,
units: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-600
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.7
hwBattsDischargeAvCurrent
Average discharge current of the battery test.
Value range: -1000 to 1000,
units: A,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inval…
Integer32
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.8
hwBattsDischargeAhValue
Discharge ampere per hour the battery test.
Value range: 0 to 5000,
Units: Ah,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.9
hwBattsTestTemperature
Battery temperature of the battery test termination.
Value range: -50 to +100,
Units: centigrade (degC),
and the value is an integer (1).
If the value is -1024, it indicates that no battery temperature value sensor …
Integer32
Constraints:
range: -50-100
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.10
hwBattsTestEndCourse
Termination factors of the battery test. It is an enumeration value.
If the enumeration value is 1, it indicates that the voltage value of the battery test reaches the set termination voltage;
If the enumeration value…
Enumeration
Enumerated Values:
1voltageToEnd
2timeToEnd
3acOnToEnd
4manulToEnd
5faultAlarmToEnd
6lowCapacityToEnd
7lowTempToEnd
255unknown
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.11
hwBattsTestResultRowStatus
RowStatus of battery test table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.4.3.100.1.100

hwBattStringConfigTable

table
.1.3.6.1.4.1.2011.6.164.1.4.4.1 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBattStringConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwBattStringConfigTable' 
Battery string config table. Use this table to get battery string equipment ID and equipment name, to set battery standard capacity and battery install time as well. This table's index is hwBattStringConfigIndex, clone battery string config table.
hwBattStringConfigEntry row .1.3.6.1.4.1.2011.6.164.1.4.4.1.1
Battery string config table. Use this table to get battery string equipment ID and equipment name, to set battery standard capacity and battery install time as well. This table's index is hwBattStringConfigIndex, clone …
Indexes
Column Syntax OID
hwBattStringConfigIndex
Device table index of the battery string,
value range: 1 to 100(To the actual subject).
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.1
hwBattStringEquipId
Batteries device ID, can be configured by users. Value range: 003,001 to 003,100, in which the first three digits specify the device type and the last three specify the device SN.
Unsigned32
Constraints:
range: 3001-3100
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.2
hwBattStringEquipName
Batteries device name, of the character string type, is used to specify the batteries. Users can configure it. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.3
hwSetBattsTempUpperLimit
Upper threshold of the battery temperature alarm, can be configured by users.
Value range: 25 to 80,
Units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates t…
Integer32r/w
Constraints:
range: 25-80
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.4
hwSetBattsTempLowerLimit
Lower threshold of the battery temperature alarm, can be configured by users.
Value range: -20 to 20,
Units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates …
Integer32r/w
Constraints:
range: -20-20
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.5
hwSetBattsTempMeasureUpperLimit
Upper threshold of the battery temperature measurement, can be configured by users.
Value range: 0 to 100,
Units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indic…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.6
hwSetBattsTempMeasureLowerLimit
Lower threshold of the battery temperature measurement, can be configured by users.
Value range: -50 to 0,
Units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indic…
Integer32r/w
Constraints:
range: -50-0
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.7
hwSetBattStdCapacity
Set battery standard capacity, is an inherent attribute of the device.
Value range: 5 to 10000,
units: Ah,
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invali…
Integer32r/w
Constraints:
range: 5-10000
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.8
hwSetBattInstallTime
Set battery install time, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.9
hwBattStringConfigRowStatus
RowStatus of battery string config table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.4.4.1.1.100

hwBattStringOperTable

table
.1.3.6.1.4.1.2011.6.164.1.4.4.2 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwBattStringOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwBattStringOperTable' 
Battery string runing table. Use this table to get battery string current, persent of remain capacity, battery remain capacity, battery actual capacity, as well as  battery temperature. 
This table's index is hwBattStringRunIndex, clone battery string runing table.
hwBattStringOperEntry row .1.3.6.1.4.1.2011.6.164.1.4.4.2.1
Battery string runing table. Use this table to get battery string current, persent of remain capacity, battery remain capacity, battery actual capacity, as well as battery temperature.
This table's index is hwBattStri…
Indexes
Column Syntax OID
hwBattStringOperIndex
Device table index of the battery string,
which value range: 1 to 100(To the actual subject).
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.1
hwBattStringCurrent
Batteries current. It is an analog parameter collected by the battery string in real time.
Value range: -1000 to +1000,
units: A,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7F…
Integer32
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.2
hwBattStringRemainCapacityPercent
Remaining capacity percentage of the battery string.
Value range: 0 to 100,
units: %,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inva…
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.3
hwBattStringRemainCapacity
Remaining capacity of the battery string. It is an analog parameter collected by the battery string in real time.
Value range: 0 to 1000,
units: Ah,
and the value is an integer (1).
If the value is 2147483647(0x7FF…
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.4
hwBattStringActualCapacity
Batteries actual capacity. It is an analog parameter collected by the battery string in real time.
Value range: 0 to 5000,
units: Ah,
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates…
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.5
hwBattStringTemprature
Battery temperature. It is a battery parameter collected in real time.
Value range: -300 to +200,
unit: centigrade (degC),
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), …
Integer32
Constraints:
range: -3000-2000
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.6
hwBattStringMidpointVoltage
Batteries midpoint voltage. It is an analog parameter collected by the battery string in real time.
Value range: -90 to +90,
unit: V,
and the value is accurate to one decimal place (.1).
Integer32
Constraints:
range: -900-900
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.7
hwBattStringOperStatus
State of the site battery string module. It is an enumeration type:
If the enumeration value is 1, it indicates that the site battery string is in the normal state;
If the enumeration value is 2, it indicates that the…
Enumeration
Enumerated Values:
1normal
2tempHigh
3tempLow
4loopBreak
5overCurrent
6unbalance
7discharge
8fuseBreak
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.99
hwBattStringOperRowStatus
RowStatus of battery string runing table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.4.4.2.1.100

hwAcInputTable

table
.1.3.6.1.4.1.2011.6.164.1.5.2.1 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAcInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAcInputTable' 
AC input table. Use this table to get AC distribution unit ID, AC distribution unit name, A phase or AB line voltage, B phase or BC line voltage, C phase or CA line voltage, AC input breaker status, 
as well as AC output breakers quantity, which defines hwAcOutputBreakerTable row number. This table's index is hwAcInputIndex, clone AC input table.
hwAcInputEntry row .1.3.6.1.4.1.2011.6.164.1.5.2.1.1
AC input table. Use this table to get AC distribution unit ID, AC distribution unit name, A phase or AB line voltage, B phase or BC line voltage, C phase or CA line voltage, AC input breaker status,
as well as AC outpu…
Indexes
Column Syntax OID
hwAcInputIndex
ACU device table index,
which value range: 1 to 100.
Lines of the device list are restricted by the total quantity of ACUs (hwAcsInputQuantity).
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.1
hwAcEquipId
ACU device ID, which users can configure. Value range: 004,001 to 004,100,
in which The first digits indicate the device type and the last three digits indicate the device SN.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.2
hwAcEquipName
ACU device name, of the character string type, is used to specify the alternating current unit (ACU).
Users can configure it. Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.3
hwApOrAblVoltage
ACU A-phase or AB-line voltage.
Value range: 0 to 600,
units: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-6000
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.4
hwBpOrBclVoltage
ACU B-phase or BC-line voltage.
Value range: 0 to 600,
units: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-6000
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.5
hwCpOrCalVoltage
ACU C-phase or CA-line voltage.
Value range: 0 to 600,
units: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-6000
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.6
hwAphaseCurrent
ACU A-phase current. It is an analog parameter collected by the ACU in real time.
Value range: 0 to 20000,
units: A,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it i…
Integer32
Constraints:
range: 0-200000
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.7
hwBphaseCurrent
ACU B-phase current. It is an analog parameter collected by the ACU in real time.
Value range: 0 to 20000,
units: A,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it in…
Integer32
Constraints:
range: 0-200000
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.8
hwCphaseCurrent
ACU C-phase current. It is an analog parameter collected by the ACU in real time.
Value range: 0 to 20000,
units: A,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it i…
Integer32
Constraints:
range: 0-200000
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.9
hwAcInputBreakersQuantity
Quantity of the AC air circuit breakers.
As the ACU lower-level subset, the node indicates the quantity of the output air circuit breakers contained by each ACU lower-level subset. Value range: 0 to 100.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.10
hwAcInputOperStatus
State of the site AC distribution uint. It is an enumeration type:
If the enumeration value is 1, it indicates that the site AC distribution uint is in the normal state;
If the enumeration value is 2, it indicates tha…
Enumeration
Enumerated Values:
1normal
2acOff
3acAbsent
4voltHigh
5voltLow
6freqHigh
7freqLow
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.99
hwAcRowStatus
RowStatus of ACU.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.5.2.1.1.100

hwAcInputBreakerTable

table
.1.3.6.1.4.1.2011.6.164.1.5.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAcInputBreakerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAcInputBreakerTable' 
Ac input breaker table. Use this table to get AC input breaker equipment ID, AC input breaker equipment name, and AC input breaker status. This table's index is hwAcInputBreakerIndex, which qualificated by hwAcInputBreakersQuantity in hwAcInputTable, clone Ac input breaker table.
hwAcInputBreakerEntry row .1.3.6.1.4.1.2011.6.164.1.5.2.2.1
Ac input breaker table. Use this table to get AC input breaker equipment ID, AC input breaker equipment name, and AC input breaker status. This table's index is hwAcInputBreakerIndex, which qualificated by hwAcInputBrea…
Indexes
Column Syntax OID
hwAcInputBreakerIndex
Device table index of the AC air circuit breaker.
Value range: 1 to 100.
An input air circuit breaker device can be uniquely identified through the ACU table index and device index of the AC air circuit breaker.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.5.2.2.1.1
hwAcInputBreakerEquipId
AC input air circuit breaker ID.
Value range: 005,001 to 005,100.
The first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 5001-5100
 .1.3.6.1.4.1.2011.6.164.1.5.2.2.1.2
hwAcInputBreakerEquipName
AC input air circuit breaker name, of the character string type, can configured by users. Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.5.2.2.1.3
hwAcInputBreakerOperStatus
Operation state of the site AC input breaker. It is an enumeration type:
If the enumeration value is 1, it indicates that the site AC input breaker is in the normal state;
If the enumeration value is 2, it indicates t…
Enumeration
Enumerated Values:
1normal
2disconnect
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.5.2.2.1.99
hwAcInputBreakerRowStatus
RowStatus of AC input breaker.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.5.2.2.1.100

hwDcOutputTable

table
.1.3.6.1.4.1.2011.6.164.1.6.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDcOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwDcOutputTable' 
/
hwDcOutputEntry row .1.3.6.1.4.1.2011.6.164.1.6.2.1.1
/
Indexes
Column Syntax OID
hwDcOutputIndex
Device table index of the DC units, which value range: 1 to 100. Lines of the device list are restricted by the total quantity of DC units (hwDcsQuantity).
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.1
hwDcOutputEquipId
DC unit device ID, which value range: 006,001 to 006,100. The first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 6001-6100
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.2
hwDcOutputEquipName
DC unit device name, of the character string type, can be configued by users. Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.3
hwDcOutputVoltage
DC output voltage. It is an analog parameter collected by the DC power in real time.
Value range: 0 to 100,
units: V,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it …
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.4
hwDcOutputCurrent
DC output current. It is an analog parameter collected by the DC power in real time.
Value range: -30000 to 30000,
units: A,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF…
Integer32
Constraints:
range: -300000-300000
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.5
hwDcOutputPower
DC output power. It is an analog parameter collected by the DC power in real time.
Value range: 0 to 3000000,
units: W,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the…
Unsigned32
Constraints:
range: 0-3000000
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.6
hwLoadsQuantity
Quantity of the DC load output branches,
which value range: 0 to 100.
As the DC unit lower-level subset, the node indicates the quantity of the DC load output branches contained by each DC unit lower-level subset.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.7
hwLoadUsage
The load usage of rated rectifier capacity.
Value range: 0 to 100,
units: %,
and the value is an integer (1).
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.8
hwDcOutputOperStatus
State of the site DC distribution uint. It is an enumeration type:
If the enumeration value is 1, it indicates that the site DC distribution uint is in the normal state;
If the enumeration value is 2, it indicates tha…
Enumeration
Enumerated Values:
1normal
2voltHigh
3voltLow
4dcAbsent
5overload
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.99
hwDcOutputRowStatus
RowStatus of Dc output equipments.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.6.2.1.1.100

hwLoadBranchTable

table
.1.3.6.1.4.1.2011.6.164.1.6.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLoadBranchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwLoadBranchTable' 
Loads output table. Use this table to get load branch equipment ID, load branch equipment name, load branch current, and load branch power. This table's index is hwLoadBranchIndex, which qualificated by hwloadsQuantity in hwDcOutputTable, clone loads output table.
hwLoadBranchEntry row .1.3.6.1.4.1.2011.6.164.1.6.2.2.1
Loads output table. Use this table to get load branch equipment ID, load branch equipment name, load branch current, and load branch power. This table's index is hwLoadBranchIndex, which qualificated by hwloadsQuantity …
Indexes
Column Syntax OID
hwLoadBranchIndex
Device table index of the DC load output branch,
which value range: 1 to 100.
A DC load output branch can be uniquely identified through the DC unit table index and device index of the DC load output branch.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.1
hwLoadBranchEquipId
Device ID of the DC load output branch. Value range: 007,001 to 007,100. The first digits indicate the device type and the last three digits indicate the SN of the device.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.2
hwLoadBranchEquipName
Device name of the DC load output branch, of the character string type, can be configured by users. Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.3
hwLoadBranchCurrent
DC load output branch current. It is an analog parameter collected by the load branch in real time.
Value range: 0 to 10000,
units: A,
and the value is accurate to one decimal space (.1).
If the value is 2147483647…
Integer32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.4
hwLoadBranchPower
DC load branch power. It is an analog parameter collected by the DC power in real time.
Value range: 0 to 600000,
units: W,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that…
Unsigned32
Constraints:
range: 0-600000
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.5
hwLoadBranchConsume
DC load branch power consumption,
Value range: 0 to 4294967295,
units: KWh,
and the value is accurate to one decimal space (.1).
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.6
hwLoadBranchConsumption
DC load branch power consumption,Value range: 0 to 4294967295, resolution:1 KWh.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.8
hwLoadBranchConsumptionLow32b
Low 32 bits of DC load branch power consumption,Value range: 0 to 4294967295, resolution:10Wh
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.9
hwLoadBranchConsumptionHigh32b
High 32 bits of DC load branch power consumption,Value range: 0 to 4294967295, resolution:10Wh
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.10
hwLoadBranchOperStatus
State of the site load output branch. It is an enumeration type:
If the enumeration value is 1, it indicates that the site load output branch is in the normal state;
If the enumeration value is 2, it indicates that th…
Enumeration
Enumerated Values:
1normal
2disconnect
3noresponse
4overload
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.99
hwLoadBranchRowStatus
RowStatus of loads output branch.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.6.2.2.1.100

hwLvdBranchTable

table
.1.3.6.1.4.1.2011.6.164.1.7.2.1 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLvdBranchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwLvdBranchTable' 
Power-off unit table. Use this table to get Lvd unit equipment ID and power-off unit equipment name, set power-off enable and power-off voltage, as well as control power-off unit disconnected. This table's index is hwLvdBranchIndex, which qualificated by hwLvdsQuantity, clone power-off unit table.
hwLvdBranchEntry row .1.3.6.1.4.1.2011.6.164.1.7.2.1.1
Power-off unit table. Use this table to get Lvd unit equipment ID and power-off unit equipment name, set power-off enable and power-off voltage, as well as control power-off unit disconnected. This table's index is hwLv…
Indexes
Column Syntax OID
hwLvdBranchIndex
Device table index of a power-off unit.
Value range: 1 to 100. Lines of the device list are restricted by the total quantity of the power-off units (hwLvdsTotalQuantity).
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.1
hwLvdUnitEquipId
Device ID of a power-off unit. Value range: 8001 to 8100. The first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 8001-8100
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.2
hwLvdUnitEquipName
Device name of a power-off unit, of the character string type, is used to specify the low-voltage power-off unit. Users can configure it. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.3
hwSetLvdEnable
Control power-off unit enabling. It is an enumeration value, and users actively set it.
If the enumeration value is 1, it means to enable the power-off unit;
If the enumeration value is 2, it means to disable the powe…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.4
hwSetLvdVoltage
Low-voltage power-off voltage of a power-off unit can be configured by users.
Its value range: 35 to 56,
units: V,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it ind…
Integer32r/w
Constraints:
range: 350-560
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.5
hwCtrlLvd
Control of the power-off unit. It is an enumeration value, users control it manually.
If the NMS notifies the SNMP agent that the node is set to 1, it means to power off the power-off unit;
If the NMS notifies the SNM…
Enumerationr/w
Enumerated Values:
1powerOff
2powerOn
255nullOper
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.6
hwSetLvdMode
Select the control mode of the power-off unit. It is an enumeration value, users can configure it manually.
If the NMS notifies the SNMP agent that the node is set to 1, it means to select the voltage power off mode;
…
Enumerationr/w
Enumerated Values:
1byVoltage
2byTime
3byCapacity
255unknown
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.7
hwSetLvdReconnectedVoltage
Low-voltage power-off recover of a power-off unit can be configured by users.
Its value range: 37.0 to 58.0,
unit: V,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it …
Integer32r/w
Constraints:
range: 370-580
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.8
hwSetLvdDisconnectedTime
Low-voltage power-off disconnected time, It can be configured by users,
value range defines between 5 to 1000,
unit: minutes(min) ??
and its value is an integer (1).
Here, if battery manual test is standard mode,
If …
Integer32r/w
Constraints:
range: 5-1000
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.9
hwSetLvdDisconnectedCapacity
Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue.
Value range: 0 to 100,
unit: %,
and the value is accurate to one decimal space (.1).
If the value i…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.10
hwLvdBranchOperStatus
State of the site LVD uint. It is an enumeration type:
If the enumeration value is 1, the site LVD uint is in the normal state;
If the enumeration value is 2, the power-off uint disconnect for low voltage;
If the enu…
Enumeration
Enumerated Values:
1normal
2lowVoltOff
3backgroundOff
4localManualOff
5lowTempOff
6highTempOff
7timeOff
8capacityOff
9forceOff
10maintenanceOff
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.99
hwLvdBranchRowStatus
RowStatus of lvd table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.7.2.1.1.100

hwEnvTempSensorTable

table
.1.3.6.1.4.1.2011.6.164.1.8.2.1 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEnvTempSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwEnvTempSensorTable' 
Site environment temperature table. 
Use this table to get environment temperature equipment ID, environment temperature equipment name, and environment temperature, set environment temperature upper limit, environment temperature lower limit, and environment temperature alarm enable. 
This table's index is hwEnvTempSensorIndex, which qualificated by hwEnvTempSensorsQuantity, clone site environment temperature table.
hwEnvTempSensorEntry row .1.3.6.1.4.1.2011.6.164.1.8.2.1.1
Site environment temperature table.
Use this table to get environment temperature equipment ID, environment temperature equipment name, and environment temperature, set environment temperature upper limit, environment …
Indexes
Column Syntax OID
hwEnvTempSensorIndex
Table index of the environment temperature sensors.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.1
hwEnvTempEquipId
Environment temperature sensor ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.2
hwEnvTempEquipName
Environment temperature sensor name, of the character string type, is used to specify an environment temperature sensor.
Users can configure it. Otherwise, the configured character can not be any other languages excep…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.3
hwEnvTemperature
Environment temperature. It is an environment parameter collected in real time.
Value range: -50 to +100,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647, it indicates that the…
Integer32
Constraints:
range: -50-100
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.4
hwSetEnvTempUpperLimit
Upper threshold of the environment temperature alarm, can be configured by users.
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inva…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.5
hwSetEnvTempLowerLimit
Lower threshold of the environment temperature alarm, can be configured by users.
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inv…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.6
hwSetEnvTempMeasureUpperLimit
Upper threshold of the environment temperature measurement, can be configured by users.
Value range: 0 to 100,
unit: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it in…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.7
hwSetEnvTempMeasureLowerLimit
Lower threshold of the environment temperature measurement, can be configured by users.
Value range: -50 to 0,
unit: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it in…
Integer32r/w
Constraints:
range: -50-0
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.8
hwSetEnvTempAlarmEnable
Environment temperature alarm. It is an enumeration type:
If the enumeration value is 1, enable the alarm of the environment temperature;
If the enumeration value is 2, disable the alarm of the environment temperature.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.9
hwSetEnvTempUltraHighTempThreshold
Threshold of the environment ultra high temperature measurement, can be configured by users.
unit: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.10
hwEnvTempSensorOperStatus
State of the site environment temperature sensor. It is an enumeration type:
If the enumeration value is 1, it indicates that the site environment temperature sensor is in the normal state;
If the enumeration value is…
Enumeration
Enumerated Values:
1normal
2tempHigh
3tempLow
4notInslot
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.99
hwEnvTempSensorRowStatus
RowStatus of Environment temperature table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.8.2.1.1.100

hwEnvHumiSensorTable

table
.1.3.6.1.4.1.2011.6.164.1.8.2.2 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEnvHumiSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwEnvHumiSensorTable' 
Environment humidity table. Use this table to get environment humidity equipment ID , environment humidity equipment name, and environment humidity, set environment humidity upper limit, environment humidity lower limit, and environment humidity alarm enable. 
This table's index is hwEnvHumiSensorIndex, which qualificated by hwEnvHumiSensorIndex, clone site environment humidity table.
hwEnvHumiSensorEntry row .1.3.6.1.4.1.2011.6.164.1.8.2.2.1
Environment humidity table. Use this table to get environment humidity equipment ID , environment humidity equipment name, and environment humidity, set environment humidity upper limit, environment humidity lower limit…
Indexes
Column Syntax OID
hwEnvHumiSensorIndex
Table index of the environment humility sensors.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.1
hwEnvHumiEquipId
Environment humility sensor ID
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.2
hwEnvHumiEquipName
Environment humility sensor name, of the character string type, is used to specify an environment humility sensor.
Users can configure it.Otherwise, the configured character can not be any other languages except Englis…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.3
hwEnvHumidity
Environment humility. It is an environment parameter collected in real time.
Value range: 0 to 100,
units: %RH,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the humidity…
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.4
hwSetEnvHumidityUpperLimit
Upper threshold of the environment humility alarm, can be configured by users.
Value range: 0 to 100,
units: %RH,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.5
hwSetEnvHumidityLowerLimit
Lower threshold of the environment humility alarm, can be configured by users.
Value range: 0 to 100,
units: %RH,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.6
hwSetEnvHumidityMeasureUpperLimit
Upper threshold of the environment humility measurement, can be configured by users.
Value range: 0 to 100,
units: %RH,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.7
hwSetEnvHumidityMeasureLowerLimit
Lower threshold of the environment humility measurement, can be configured by users.
Value range: 0 to 100,
units: %RH,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the v…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.8
hwSetEnvHumiAlarmEnable
Environment humility alarm. It is an enumeration type:
If the enumeration value is 1, enable the alarm of the environment humility;
If the enumeration value is 2, disable the alarm of the environment humility.
The env…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.9
hwEnvHumiSensorOperStatus
State of the site environment humidity sensor. It is an enumeration type:
If the enumeration value is 1, it indicates that the site environment humidity sensor is in the normal state;
If the enumeration value is 2, it…
Enumeration
Enumerated Values:
1normal
2humidityHigh
3humidityLow
4notInslot
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.99
hwEnvHumiSensorRowStatus
RowStatus of Environment humidity table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.8.2.2.1.100

hwSpareDigitalTable

table
.1.3.6.1.4.1.2011.6.164.1.8.2.3 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSpareDigitalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSpareDigitalTable' 
Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareDigitalIndex, which qualificated by hwSpareDigitalsTotalQuantity, clone switch input table.
hwSpareDigitalEntry row .1.3.6.1.4.1.2011.6.164.1.8.2.3.1
Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareD…
Indexes
Column Syntax OID
hwSpareDigitalIndex
Spare digital table index, which
value range: 1 to 256.
Lines of the device list are restricted by the quantity of Spare digitals (hwSpareDigitalsTotalQuantity).
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.2011.6.164.1.8.2.3.1.1
hwSpareDigitalEquipId
Spare digital device ID. Value range: 011'001 to 011'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 11001-11255
 .1.3.6.1.4.1.2011.6.164.1.8.2.3.1.2
hwSpareDigitalEquipName
Spare digital name, of the character string type, is used to specify Spare digitals. Users can configure it. Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.6.164.1.8.2.3.1.3
hwSpareDigitalAlarmTension
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a low-tension alarm;
If the value of the node is 2, it indicates a high-tension alarm.
Enumerationr/w
Enumerated Values:
0open
1close
 .1.3.6.1.4.1.2011.6.164.1.8.2.3.1.4
hwSpareDigitalAlarmEnable
Spare digital alarm enabling. It is an enumeration type:
If the enumeration value is 1, it means to enable the alarm;
If the enumeration value is 2, it means to disable the alarm.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.164.1.8.2.3.1.5
hwSpareDigitalOperStatus
State of the site Spare digital. It is an enumeration type:
If the enumeration value is 1, it indicates that the Spare digital operation state is normal;
If the enumeration value is 2, it indicates that a alarm occurs…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.8.2.3.1.99
hwSpareDigitalRowStatus
RowStatus of of the site Spare digital.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.8.2.3.1.100

hwSpareDigitalOutputTable

table
.1.3.6.1.4.1.2011.6.164.1.8.2.4 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSpareDigitalOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSpareDigitalOutputTable' 
Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareDigitalIndex, which qualificated by hwSpareDigitalsTotalQuantity, clone switch input table.
hwSpareDigitalOutputEntry row .1.3.6.1.4.1.2011.6.164.1.8.2.4.1
Spare digital table. Use this table to get Spare digital equipment ID , Spare digital equipment name, and current Spare digital alarm tension, ae well as to set Spare digital alarm enable. This table's index is hwSpareD…
Indexes
Column Syntax OID
hwSpareDigitalOutputIndex
Spare digital table index, which
value range: 1 to 256.
Lines of the device list are restricted by the quantity of Spare digitals (hwSpareDigitalsTotalQuantity).
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.2011.6.164.1.8.2.4.1.1
hwSpareDigitalOutputEquipId
Spare digital device ID. Value range: 012'001 to 012'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 12001-12255
 .1.3.6.1.4.1.2011.6.164.1.8.2.4.1.2
hwSpareDigitalOutputEquipName
Spare digital name, of the character string type, is used to specify Spare digitals. Users can configure it. Otherwise, the configured character can not be any other languages except English.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.4.1.3
hwSetSpareDigitalOutputAlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a low-tension alarm;
If the value of the node is 2, it indicates a high-tension alarm.
Enumerationr/w
Enumerated Values:
1open
2close
 .1.3.6.1.4.1.2011.6.164.1.8.2.4.1.4
hwSetSpareDigitalOutputEnable
Spare digital alarm enabling. It is an enumeration type:
If the enumeration value is 1, it means to enable the alarm;
If the enumeration value is 2, it means to disable the alarm.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.164.1.8.2.4.1.5
hwSpareDigitalOutputOperStatus
State of the site Spare digital. It is an enumeration type:
If the enumeration value is 1, it indicates that the Spare digital operation state is normal;
If the enumeration value is 2, it indicates that a alarm occurs…
Enumeration
Enumerated Values:
1open
2close
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.8.2.4.1.99
hwSpareDigitalOutputRowStatus
RowStatus of Spare digital device table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.8.2.4.1.100

hwTemp1Table

table
.1.3.6.1.4.1.2011.6.164.1.8.2.5 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTemp1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwTemp1Table' 
Temp1 Table.
hwTemp1Entry row .1.3.6.1.4.1.2011.6.164.1.8.2.5.1
Temp1 Table.
Indexes
Column Syntax OID
hwTemp1Index
Table index of the temp1 sensors. Value range: 1 to 256. Lines of the device list are restricted by the quantity of temp1 sensors (hwEnvHumiSensorsTotalQuantity).
Integer32
Constraints:
range: 3394-3394
 .1.3.6.1.4.1.2011.6.164.1.8.2.5.1.1
hwTemp1EquipId
Temp1 sensor ID, can be configured by users. Value range: 026'000 to 026'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 26000-26255
 .1.3.6.1.4.1.2011.6.164.1.8.2.5.1.2
hwTemp1EquipName
Temp1 sensor name, of the character string type, is used to specify an temp1 sensor. Users can configure it. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.5.1.3
hwTemp1Value
Temp1. It is an environment parameter collected in real time.
Value range: -40 to +80,
units: centigrade (degC),
and the value is an integer (1).
If the value is -1024, it indicates that the temperature sensor is n…
Integer32
Constraints:
range: -40-80
 .1.3.6.1.4.1.2011.6.164.1.8.2.5.1.4
hwTemp1HighLimit
Upper threshold of the temp1 alarm, can be configured by users.
Value range: 25 to 80,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value …
Integer32r/w
Constraints:
range: 25-80
 .1.3.6.1.4.1.2011.6.164.1.8.2.5.1.5
hwTemp1LowLimit
Lower threshold of the temp1 alarm, can be configured by users. Value range: -20 to 20, units: centigrade (degC), and the value is an integer (1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is …
Integer32r/w
Constraints:
range: -20-20
 .1.3.6.1.4.1.2011.6.164.1.8.2.5.1.6
hwTemp1OperStatus
State of the site temp1 sensor. It is an enumeration type:
If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state;
If the enumeration value is 2, it indicates that the temp1 sens…
Enumeration
Enumerated Values:
1normal
2tempHigh
3tempLow
4notInslot
5tempFault
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.8.2.5.1.99

hwTemp2Table

table
.1.3.6.1.4.1.2011.6.164.1.8.2.6 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTemp2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwTemp2Table' 
Temp2 Table.
hwTemp2Entry row .1.3.6.1.4.1.2011.6.164.1.8.2.6.1
Temp2 Table.
Indexes
Column Syntax OID
hwTemp2Index
Table index of the temp2 sensors.
Value range: 1 to 256.
Lines of the device list are restricted by the quantity of temp2 sensors (hwEnvHumiSensorsTotalQuantity).
Integer32
Constraints:
range: 3394-3394
 .1.3.6.1.4.1.2011.6.164.1.8.2.6.1.1
hwTemp2EquipId
Temp2 sensor ID, can be configured by users. Value range: 027'000 to 027'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 27000-27255
 .1.3.6.1.4.1.2011.6.164.1.8.2.6.1.2
hwTemp2EquipName
Temp2 sensor name, of the character string type, is used to specify an temp2 sensor. Users can configure it. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.6.1.3
hwTemp2Value
Temp2. It is an environment parameter collected in real time.
Value range: -40 to +80,
units: centigrade (degC),
and the value is an integer (1).
If the value is -1024, it indicates that the temperature sensor is n…
Integer32
Constraints:
range: -40-80
 .1.3.6.1.4.1.2011.6.164.1.8.2.6.1.4
hwTemp2HighLimit
Upper threshold of the temp2 alarm, can be configured by users.
Value range: 25 to 80,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value …
Integer32r/w
Constraints:
range: 25-80
 .1.3.6.1.4.1.2011.6.164.1.8.2.6.1.5
hwTemp2LowLimit
Lower threshold of the temp2 alarm, can be configured by users.
Value range: -20 to 20,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Integer32r/w
Constraints:
range: -20-20
 .1.3.6.1.4.1.2011.6.164.1.8.2.6.1.6
hwTemp2OperStatus
State of the site temp2 sensor. It is an enumeration type:
If the enumeration value is 1, it indicates that the site temp2 sensor is in the normal state;
If the enumeration value is 2, it indicates that the temp2 sens…
Enumeration
Enumerated Values:
1normal
2tempHigh
3tempLow
4notInslot
5tempFault
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.8.2.6.1.99

hwSmokeSensorTable

table
.1.3.6.1.4.1.2011.6.164.1.8.2.13 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSmokeSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSmokeSensorTable' 
/
hwSmokeSensorEntry row .1.3.6.1.4.1.2011.6.164.1.8.2.13.1
/
Indexes
Column Syntax OID
hwSmokeSensorIndex
The tem_hum equip Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.13.1.1
hwSmokeSensorEquipId
/
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.13.1.2
hwSmokeEquipName
/
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.13.1.3
hwSmokeSensorStatus
The smoke sensor status
Enumeration
Enumerated Values:
0normal
1alarm
 .1.3.6.1.4.1.2011.6.164.1.8.2.13.1.4

hwWaterSensorTable

table
.1.3.6.1.4.1.2011.6.164.1.8.2.14 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwWaterSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwWaterSensorTable' 
/
hwWaterSensorEntry row .1.3.6.1.4.1.2011.6.164.1.8.2.14.1
/
Indexes
Column Syntax OID
hwWaterSensorIndex
The tem_hum equip Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.14.1.1
hwWaterSensorEquipId
/
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.14.1.2
hwWaterEquipName
/
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.14.1.3
hwWaterSensorStatus
The smoke sensor status
Enumeration
Enumerated Values:
0normal
1alarm
 .1.3.6.1.4.1.2011.6.164.1.8.2.14.1.4

hwDoorSensorTable

table
.1.3.6.1.4.1.2011.6.164.1.8.2.15 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDoorSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwDoorSensorTable' 
/
hwDoorSensorEntry row .1.3.6.1.4.1.2011.6.164.1.8.2.15.1
/
Indexes
Column Syntax OID
hwDoorSensorIndex
The tem_hum equip Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.15.1.1
hwDoorSensorEquipId
/
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.8.2.15.1.2
hwDoorEquipName
/
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.8.2.15.1.3
hwDoorSensorStatus
The smoke sensor status
Enumeration
Enumerated Values:
0normal
1alarm
 .1.3.6.1.4.1.2011.6.164.1.8.2.15.1.4

hwInverterTable

table
.1.3.6.1.4.1.2011.6.164.1.9.2.1 · 1 row entry · 26 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwInverterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwInverterTable' 
/
hwInverterEntry row .1.3.6.1.4.1.2011.6.164.1.9.2.1.1
/
Indexes
Column Syntax OID
hwInverterIndex
Inverter table index,which value range:1 to 256.Lines of the device list are restricted by the quantity of Inverter.
Unsigned32
Constraints:
range: 1-256
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.1
hwInverterEquipId
Inverter device ID. Value range: 018'001 to 018'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 18001-18255
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.2
hwInverterEquipName
Inverter name, of the character string type, is used to specify Inverters. Users can configure it.Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.3
hwInverterAcOutputVolt
Inverter AC Output voltage,
Value range: 0.0 to 10000.0.
Unit: V.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.4
hwInverterAcOutputCurr
Inverter AC Output current,
Value range: 0.0 to 10000.0.
Unit: A.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.5
hwInverterAcOutputFreq
Inverter AC Output frequency,
Value range: 0 to 10000.
Unit: Hz.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.6
hwInverterAcOutputActivePower
Inverter AC Output power,
Value range: 0 to 10000000.
Unit: W.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.7
hwInverterAcOutputVA
Inverter AC Output power,
Value range: 0.0 to 100000.0.
Unit: VA.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.8
hwInverterAcInputVolt
Inverter AC Input voltage,
Value range: 0.0 to 10000.0.
Unit: V.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.9
hwInverterAcInputCurr
Inverter AC Input current,
Value range: 0.0 to 10000.0.
Unit: A.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.10
hwInverterAcInputFreq
Inverter AC Input frequency,
Value range: 0 to 10000.
Unit: Hz.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.11
hwInverterAcInputActivePower
Inverter AC Input power,
Value range: 0 to 10000000.
Unit: W.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.12
hwInverterAcInputVA
Inverter AC Input power,
Value range: 0.0 to 10000.0.
Unit: VA.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.13
hwInverterDcInputVolt
Inverter DC Input voltage,
Value range: 0.0 to 10000.0.
Unit: V.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.14
hwInverterDcInputCurr
Inverter DC Input current,
Value range: 0 to 10000.
Unit: A.
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.15
hwInverterDcInputPower
Inverter DC Input power,
Value range: 0 to 10000000.
Unit: W.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.16
hwInverterRevision
Inverter software version number.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.17
hwInverterPhaseNum
Inverter Number of the phase module, Value range: 0 to 10000. If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.18
hwInverterAcGroupNum
Inverter Number of AC group,
Value range: 0 to 10000.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.19
hwInverterDcGroupNum
Inverter Number of DC group,
Value range: 0 to 10000.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.20
hwInverterMajorAlarmNum
Inverter Number of Major alarm,
Value range: 0 to 10000.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.21
hwInverterMinorAlarmNum
Inverter Number of Minor alarm,
Value range: 0 to 10000.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.22
hwInverterT2SSerialNum
Inverter T2S serial number,
Value range: 0 to 4294967295.
If the value is 4294967295(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.23
hwInverterModuleTemp
Inverter module Temperature,
Value range: -300 to 10000.
Unit: degC.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -300-10000
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.24
hwInverterOperStatus
State of the Inverter. It is an enumeration type:
If the enumeration value is 1, it indicates that the Inverter is in the normal state;
If the enumeration value is 2, it indicates that the Inverter is in the alarm stat…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknow
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.99
hwInverterRowStatus
RowStatus of Inverter table.
RowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.9.2.1.1.100

hwFanTable

table
.1.3.6.1.4.1.2011.6.164.1.10.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwFanTable' 
/
hwFanEntry row .1.3.6.1.4.1.2011.6.164.1.10.2.1.1
/
Indexes
Column Syntax OID
hwFanIndex
Fan table index,which
value range: 1 to 256.
Lines of the device list are restricted by the quantity of Fan.
Unsigned32
Constraints:
range: 1-256
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.1
hwFanEquipId
Fan device ID. Value range: 020'001 to 020'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 20001-20255
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.2
hwFanEquipName
Fan name, of the character string type, is used to specify Fans. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.3
hwFanCtrlMode
State of the Fan ctrl mode. It is an enumeration type:
If the enumeration value is 1, it indicates that the fan is in autoControl state;
If the enumeration value is 2, it indicates that the fan is in manualControl stat…
Enumerationr/w
Enumerated Values:
1autoControl
2manualControl
3other
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.4
hwFan1Status
State of the Fan1 status. It is an enumeration type:
If the enumeration value is 1, it indicates that the fan is in normal state;
If the enumeration value is 2, it indicates that the fan is in fault state;
If the enume…
Enumeration
Enumerated Values:
1normal
2fault
3inexistent
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.5
hwFan2Status
State of the Fan2 status. It is an enumeration type:
If the enumeration value is 1, it indicates that the fan is in normal state;
If the enumeration value is 2, it indicates that the fan is in fault state;
If the enume…
Enumeration
Enumerated Values:
1normal
2fault
3inexistent
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.6
hwFan3Status
State of the Fan3 status. It is an enumeration type:
If the enumeration value is 1, it indicates that the fan is in normal state;
If the enumeration value is 2, it indicates that the fan is in fault state;
If the enume…
Enumeration
Enumerated Values:
1normal
2fault
3inexistent
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.7
hwFan4Status
State of the Fan4 status. It is an enumeration type:
If the enumeration value is 1, it indicates that the fan is in normal state;
If the enumeration value is 2, it indicates that the fan is in fault state;
If the enume…
Enumeration
Enumerated Values:
1normal
2fault
3inexistent
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.8
hwFan1Speed
Fan1 speed,
Value range: 0 to 10000.
Unit: rpm.
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.9
hwFan2Speed
Fan2 speed,
Value range: 0 to 10000.
Unit: rpm.
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.10
hwFan3Speed
Fan3 speed,
Value range: 0 to 10000.
Unit: rpm.
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.11
hwFan4Speed
Fan4 speed,
Value range: 0 to 10000.
Unit: rpm.
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.12
hwFanOperStatus
State of the fan. It is an enumeration type:
If the enumeration value is 1, it indicates that the Inverter is in the normal state;
If the enumeration value is 2, it indicates that the Inverter is in the fault state;
…
Enumeration
Enumerated Values:
1normal
2fault
254alarmResume
255unknow
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.99
hwFanRowStatus
RowStatus fo fan table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.10.2.1.1.100

hwDcAirConditionTable

table
.1.3.6.1.4.1.2011.6.164.1.10.2.2 · 1 row entry · 20 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDcAirConditionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwDcAirConditionTable'
hwDcAirConditionEntry row .1.3.6.1.4.1.2011.6.164.1.10.2.2.1
Indexes
Column Syntax OID
hwDcAirIndex
Dc aircondition table index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.1
hwDcAirEquipId
Dc aircondition device ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.2
hwDcAirEquipName
Dc aircondition name, of the character string type, is used to specify Fans. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.3
hwDcAirCtrlMode
State of the Dc aircondition ctrl mode. It is an enumeration type:
If the enumeration value is 1, it indicates that the Dc aircondition is in autoControl state;
If the enumeration value is 2, it indicates that the Dc a…
Enumerationr/w
Enumerated Values:
1autoControl
2manualControl
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.4
hwDcAirCtrlOnOff
State of the Dc aircondition control on or off. It is an enumeration type:
If the enumeration value is 1, it indicates that the Dc aircondition is in on state;
If the enumeration value is 2, it indicates that the Dc ai…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.5
hwDcAirRunStatus
State of the Dc aircondition run status. It is an enumeration type:
If the enumeration value is 1, it indicates that the Dc aircondition is in standby state;
If the enumeration value is 2, it indicates that the Dc airc…
Enumeration
Enumerated Values:
1standby
2run
3fault
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.6
hwDcAirCompressorRunStatus
State of the Dc air compressor run status. It is an enumeration type:
If the enumeration value is 1, it indicates that the Dc aircondition is in standby state;
If the enumeration value is 2, it indicates that the Dc ai…
Enumeration
Enumerated Values:
1standby
2run
3fault
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.7
hwDcAirInnrFanSpeed
Dc aircondition innr speed,
Value range: 0 to 60000.
Unit: rpm,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.8
hwDcAirOuterFanSpeed
Dc aircondition outer speed,
Value range: 0.0 to 60000.0.
Unit: rpm,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.9
hwDcAirCompressorRunTime
Dc aircondition compressor run time,
Value range: 0 to 175200.
Unit: h,
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-175200
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.10
hwDcAirRunTime
Dc aircondition run time,
Value range: 0 to 175200.
Unit: H,
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: 0-175200
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.11
hwDcAirEnterChannelTemp
Dc aircondition enter channel temperature,
Value range:-500.0 to 1000.0.
Unit: degC.
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -500-1000
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.13
hwDcAirPowerOnTempPoint
Dc aircondition power on temperature point,
Value range:-200 to 800.
Unit: degC.
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32r/w
Constraints:
range: -200-800
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.14
hwDcAirPowerOffTempPoint
Dc aircondition power off temperature point,
Value range:-200 to 800
Unit: degC.
the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32r/w
Constraints:
range: -200-800
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.15
hwAcOffEnergySaving
State of the Dc air energy saving status. It is an enumeration type:
If the enumeration value is 1, it indicates that the Dc aircondition is in disable state;
If the enumeration value is 2, it indicates that the Dc air…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.17
hwDcAirPowerOnAcOffPoint
Dc aircondition power on ac fail temperature point,
Value range:-200 to 800.
Unit: degC.
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32r/w
Constraints:
range: -200-800
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.18
hwDcAirPowerOffAcOffPoint
Dc aircondition compressor start temperature point,
Value range:-200 to 800.
Unit: degC.
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32r/w
Constraints:
range: -200-800
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.19
hwDcAirEquipAddress
DC Air Device address
And the value is an integer (1).
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.21
hwDcAirOperStatus
State of the dc aircondition. It is an enumeration type:
If the enumeration value is 1, it indicates that the Inverter is in the standby state;
If the enumeration value is 2, it indicates that the Inverter is in the ru…
Enumeration
Enumerated Values:
1standby
2run
3fault
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.99
hwDcAirRowStatus
RowStatus fo dc aircondition table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.10.2.2.1.100

hwSiteAcAmmeterTable

table
.1.3.6.1.4.1.2011.6.164.1.11.2.1 · 1 row entry · 37 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteAcAmmeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteAcAmmeterTable' 
/
hwSiteAcAmmeterEntry row .1.3.6.1.4.1.2011.6.164.1.11.2.1.1
/
Indexes
Column Syntax OID
hwAcAmmeterIndex
Ac Ammeter table index,which value range:4096 to 20479. Lines of the device list are restricted by the quantity of AcAmmeter
Unsigned32
Constraints:
range: 4096-20479
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.1
hwAcAmmeterEquipId
Ac Ammeter device ID. Value range: 022'001 to 022'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 22001-22255
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.2
hwAcAmmeterEquipName
Ac Ammeter name, of the character string type, is used to specify Fans. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.3
hwAcAmmeterFrequency
Ac Ammeter frequency,
Value range: 0.00 to 1000.00.
Unit: Hz.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.4
hwAcAmmeterPhaseL1Voltage
Ac Ammeter phase a voltage,
Value range: 0.00 to 2000.00.
Unit: V.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-200000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.5
hwAcAmmeterPhaseL2Voltage
Ac Ammeter phase b voltage,
Value range: 0.00 to 2000.0.
Unit: V.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-200000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.6
hwAcAmmeterPhaseL3Voltage
Ac Ammeter phase c voltage,
Value range: 0.00 to 2000.0.
Unit: V.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-200000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.7
hwAcAmmeterSetChannelNum
Ac Ammeter set channel number,
Value range: 1 to 4.
Unit: NA.
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.8
hwAcAmmeterClear
Ac Ammeter clear communication failure . It is an enumeration type:
If the enumeration value is 1, it indicates that the ac ammeter clear communication failure alarm;
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.9
hwAcAmmeterType
Ac Ammeter type, Value range: 0 to 65535. And the value is an integer(1).
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.10
hwAcAmmeterVersion
Ac Ammeter version, of the character string type, is used to specify Ac Ammeter. Users can not configure it.
OctetString
Constraints:
range: 0-56
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.11
hwAcAmmeterPhaseL1CurrentCH1
Ac Ammeter phase a current of channel 1,
Value range: 0.00 to 1000.0.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.12
hwAcAmmeterPhaseL2CurrentCH1
Ac Ammeter phase b current of channel 1,
Value range: 0.00 to 1000.0.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.13
hwAcAmmeterPhaseL3CurrentCH1
Ac Ammeter phase c current of channel 1,
Value range: 0.00 to 1000.0.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.14
hwAcAmmeterTotalActivePowerCH1
Ac Ammeter phase c current of channel 1,
Value range: -1000000.00 to 1000000.00.
Unit: kW.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is i…
Integer32
Constraints:
range: -100000000-100000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.15
hwAcAmmeterTotalPowerFactorCH1
Ac Ammeter total power factor of channel 1,
Value range: -10.00 to 10.00.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.16
hwAcAmmeterTotalActiveEngryAccCH1
Ac Ammeter total active engry acc of channel 1,
Value range: 0.00 to 1000000000.00.
Unit: kWh.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value …
Unsigned32
Constraints:
range: 0-10000000000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.17
hwAcAmmeterPhaseL1CurrentCH2
Ac Ammeter phase a current of channel 2,
Value range: 0.00 to 1000.00.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.18
hwAcAmmeterPhaseL2CurrentCH2
Ac Ammeter phase b current of channel 2,
Value range: 0.00 to 1000.00.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.19
hwAcAmmeterPhaseL3CurrentCH2
Ac Ammeter phase c current of channel 2,
Value range: 0.00 to 1000.00.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.20
hwAcAmmeterTotalActivePowerCH2
Ac Ammeter phase c current of channel 2,
Value range: -1000000.00 to 1000000.00.
Unit: kW.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is i…
Integer32
Constraints:
range: -100000000-100000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.21
hwAcAmmeterTotalPowerFactorCH2
Ac Ammeter total power factor of channel 2,
Value range: -10.00 to 10.00.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.22
hwAcAmmeterTotalActiveEngryAccCH2
Ac Ammeter total active engry acc of channel 2,
Value range: 0.00 to 1000000000.00.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is…
Unsigned32
Constraints:
range: 0-100000000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.23
hwAcAmmeterPhaseL1CurrentCH3
Ac Ammeter phase a current of channel 3,
Value range: 0.00 to 1000.00.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.24
hwAcAmmeterPhaseL2CurrentCH3
Ac Ammeter phase b current of channel 3,
Value range: 0.00 to 1000.00.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.25
hwAcAmmeterPhaseL3CurrentCH3
Ac Ammeter phase c current of channel 3,
Value range: 0.00 to 1000.00.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.26
hwAcAmmeterTotalActivePowerCH3
Ac Ammeter phase c current of channel 3,
Value range: -1000000.00 to 1000000.00.
Unit: kW.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is i…
Integer32
Constraints:
range: -100000000-100000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.27
hwAcAmmeterTotalPowerFactorCH3
Ac Ammeter total power factor of channel 3,
Value range: -10.00 to 10.00.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.28
hwAcAmmeterTotalActiveEngryAccCH3
Ac Ammeter total active engry acc of channel 3,
Value range: 0.00 to 1000000000.00.
Unit: kWh.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value …
Unsigned32
Constraints:
range: 0-100000000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.29
hwAcAmmeterPhaseL1CurrentCH4
Ac Ammeter phase a current of channel 4,
Value range: 0 to 1000.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.30
hwAcAmmeterPhaseL2CurrentCH4
Ac Ammeter phase b current of channel 4,
Value range: 0 to 1000.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.31
hwAcAmmeterPhaseL3CurrentCH4
Ac Ammeter phase c current of channel 4,
Value range: 0 to 1000.
Unit: A.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.32
hwAcAmmeterTotalActivePowerCH4
Ac Ammeter phase c current of channel 4,
Value range: -1000000 to 1000000.
Unit: kW.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -100000000-100000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.33
hwAcAmmeterTotalPowerFactorCH4
Ac Ammeter total power factor of channel 4,
Value range: -10.00 to 10.00.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.34
hwAcAmmeterTotalActiveEngryAccCH4
Ac Ammeter total active engry acc of channel 4,
Value range: 0 to 1000000000.
Unit: kWh.
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inv…
Unsigned32
Constraints:
range: 0-100000000000
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.35
hwAcAmmeterOperStatus
State of the Ac Ammeter. It is an enumeration type:
If the enumeration value is 1, it indicates that the Ac Ammeter is in the normal state;
If the enumeration value is 2, it indicates that the Ac Ammeter is in the faul…
Enumeration
Enumerated Values:
1normal
2fault
255unknown
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.99
hwAcAmmeterRowStatus
RowStatus fo Ac Ammeter table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.11.2.1.1.100

hwDGTable

table
.1.3.6.1.4.1.2011.6.164.1.12.2.1 · 1 row entry · 23 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwDGTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwDGTable' 
/
hwDGEntry row .1.3.6.1.4.1.2011.6.164.1.12.2.1.1
/
Indexes
Column Syntax OID
hwDGIndex
DG table index,which value range:1 to 256. Lines of the device list are restricted by the quantity of DG.
Integer32
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.1
hwDGEquipId
DG device ID. Value range: 023'001 to 023'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 23001-23255
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.2
hwDGEquipName
Device name of the DG module, character string type, is used to specify the DG module. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.3
hwDGType
Specific type of the DG module. It is an enumeration type:
If the enumeration value is 1, it indicates a intelligent DG module;
If the enumeration value is 2, it indicates a non_intelligent module;
If the enumeration …
Enumeration
Enumerated Values:
1intelligent
2non_intelligent
255unknown
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.4
hwDGAphaseVoltage
A-phase voltage.
Value range: 0 to 500,
units: V,
and the value is accurate to one decimal place (.1).
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.5
hwDGBphaseVoltage
B-phase voltage.
Value range: 0 to 500,
units: V,
and the value is accurate to one decimal place (.1).
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.6
hwDGCphaseVoltage
C-phase voltage.
Value range: 0 to 500,
units: V,
and the value is accurate to one decimal place (.1).
Unsigned32
Constraints:
range: 0-5000
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.7
hwDGAphaseCurrent
A-phase current.
Value range: 0 to 100,
units: A,
and the value is an integer (1).
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.8
hwDGBphaseCurrent
B-phase current.
Value range: 0 to 100,
units: A,
and the value is an integer (1).
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.9
hwDGCphaseCurrent
C-phase current.
Value range: 0 to 100,
units: A,
and the value is an integer (1).
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.10
hwDGOutputPower
DG output power.
Value range: 0 to 100,
units: kw,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.11
hwDGFrequency
The frequency of DG.
Value range: 5 to 120,
units: Hz,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 50-1200
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.12
hwDGBatteryVoltage
The voltage of DG battery.
Value range: 0 to 24,
units: V,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 0-240
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.13
hwDGTotalRuntime
The total running time of DG,
Value range: 0 to 876000,
units: h,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 0-8760000
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.14
hwDGAphasePowerFactor
A phase power factor of DG,
Value range: -1 to 1,
units: ,
and the value is two decimal space (.01).
Integer32
Constraints:
range: -100-100
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.15
hwDGBphasePowerFactor
B phase power factor of DG,
Value range: -1 to 1,
units: ,
and the value is two decimal space (.01).
Integer32
Constraints:
range: -100-100
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.16
hwDGCphasePowerFactor
C phase power factor of DG,
Value range: -1 to 1,
units: ,
and the value is two decimal space (.01).
Integer32
Constraints:
range: -100-100
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.17
hwDGLoadRate
The load rate of DG,
Value range: 0 to 100,
units: %,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.18
hwDGOnOffControl
Power-on or power-off of the DG module, is an enumeration value. Users can modify the enumeration value of this node, thus controlling of the power-on or power-off of the DG module:
If the NMS notifies the SNMP agent th…
Enumerationr/w
Enumerated Values:
1on
2off
255unknown
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.19
hwDGFaultReset
DG fault reset.
Enumerationr/w
Enumerated Values:
1reset
255unknown
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.20
hwDGMaintenanceConfirm
DG maintenance confirm.
Enumerationr/w
Enumerated Values:
1reset
255unknown
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.21
hwDGOperStatus
State of the DG. It is an enumeration type:
If the enumeration value is 1, it indicates that the DG is in the normal state;
If the enumeration value is 2, it indicates that the DG is in the fault state;
If the enumer…
Enumeration
Enumerated Values:
1stop
2running
255unknown
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.99
hwDGRowStatus
RowStatus fo DG.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.12.2.1.1.100

hwSSUTable

table
.1.3.6.1.4.1.2011.6.164.1.13.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSSUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSSUTable' 
/
hwSSUEntry row .1.3.6.1.4.1.2011.6.164.1.13.2.1.1
/
Indexes
Column Syntax OID
hwSSUIndex
SSU table index,which value range:1 to 256. Lines of the device list are restricted by the quantity of SSU.
Integer32
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.1
hwSSUEquipId
SSU device ID. Value range: 024'001 to 024'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 24001-24255
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.2
hwSSUEquipName
Device name of the SSU module, character string type, is used to specify the SSU module.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.3
hwSSURunningState
The running status of the SSU module. It is an enumeration type:
If the enumeration value is 1, it indicates that the SSU module is power on ;
If the enumeration value is 2, it indicates that the SSU module is power of…
Enumeration
Enumerated Values:
1on
2off
255nullOper
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.4
hwSSUInputVoltage
The input voltage of SSU,
Value range: 0 to 200,
units: V,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.5
hwSSUOutputVoltage
The output voltage of SSU,
Value range: 0 to 200,
units: V,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.6
hwSSUOutputCurrent
The output current of SSU,
Value range: 0 to 1000,
units: A,
and the value is one decimal space (.1).
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.7
hwSSUAddress
The address of SSU,
Value range: 0 to 100,
units: ,
and the value is an integer (1).
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.8
hwSSURowStatus
RowStatus fo SSU.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.13.2.1.1.100

hwSiteBatteryCabinetTable

table
.1.3.6.1.4.1.2011.6.164.1.14.2.1 · 1 row entry · 19 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteBatteryCabinetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteBatteryCabinetTable' 
/
hwSiteBatteryCabinetEntry row .1.3.6.1.4.1.2011.6.164.1.14.2.1.1
/
Indexes
Column Syntax OID
hwBatteryCabinetIndex
Battery Cabinet table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Battery Cabinet
Unsigned32
Constraints:
range: 4096-20479
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.1
hwBatteryCabinetEquipId
Battery Cabinet device ID. Value range: 025'001 to 025'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 25000-25255
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.2
hwBatteryCabinetEquipName
Battery Cabinet name, of the character string type, is used to specify battery cabinet. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.3
hwBatteryCabinetIndoorVentTemp
Indoor vent temperature. It is an environment parameter collected in real time.
Value range: -40 to +100,
units: centigrade,
and the value is an integer (1).
If the value is -99999, it indicates that the temperatur…
Integer32
Constraints:
range: -40-100
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.4
hwBatteryCabinetBattTemp
Battery temperature. It is an environment parameter collected in real time.
Value range: -40 to +100,
units: centigrade,
and the value is an integer (1).
If the value is -99999, it indicates that the temperature sen…
Integer32
Constraints:
range: -40-100
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.5
hwBatteryCabinetFan1Speed
Fan 1 speed,
Value range: 0.0 to 10000.0.
Unit: rpm,
the value is an integer (1).
If the value is -1, it indicates that the fan is not configured.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.6
hwBatteryCabinetFan2Speed
Fan 2 speed,
Value range: 0.0 to 10000.0.
Unit: rpm,
the value is an integer (1).
If the value is -1, it indicates that the fan is not configured.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.7
hwBatteryCabinetFan3Speed
Fan 3 speed,
Value range: 0.0 to 10000.0.
Unit: rpm,
the value is an integer (1).
If the value is -1, it indicates that the fan is not configured.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.8
hwBatteryCabinetFan4Speed
Fan 4 speed,
Value range: 0.0 to 10000.0.
Unit: rpm,
the value is an integer (1).
If the value is -1, it indicates that the fan is not configured.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.9
hwBatteryCabinetAirConditionerStatus
State of the airconditioner. It is an enumeration type:
If the enumeration value is 1, it indicates that the airconditioner is in the standby state;
If the enumeration value is 2, it indicates that the airconditioner i…
Enumeration
Enumerated Values:
1standby
2run
3fault
255unknown
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.10
hwBatteryCabinetCompressorStatus
State of the compressor. It is an enumeration type:
If the enumeration value is 1, it indicates that the compressor is in the standby state;
If the enumeration value is 2, it indicates that the compressor is in the run…
Enumeration
Enumerated Values:
1standby
2run
3fault
255unknown
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.11
hwBatteryCabinetInternalFanSpeed
Internal Fan speed,
Value range: 0 to 10000.
Unit: rpm,
the value is an integer (1).
If the value is -1, it indicates that the fan is not configured.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.12
hwBatteryCabinetExternalFanSpeed
External Fan speed,
Value range: 0 to 10000.
Unit: rpm,
the value is an integer (1).
If the value is -1, it indicates that the temperature sensor is not configured.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.13
hwBatteryCabinetAirConditionerRuntime
Total runtime of the air conditioner.
Value units: hour (h),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.14
hwBatteryCabinetCompressorRuntime
Total runtime of the compressor.
Value units: hour (h),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.15
hwBatteryCabinetAirConWorkTemp
Battery cabinet aircondition power on temperature point,
Value range:-20 to 80
Unit: degC.
and the value is an integer (1).
Integer32r/w
Constraints:
range: -20-80
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.16
hwBatteryCabinetAirConStopTemp
Battery cabinet aircondition power off temperature point,
Value range:-20 to 80
Unit: degC.
and the value is an integer(1).
Integer32r/w
Constraints:
range: -20-80
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.17
hwBatteryCabinetOperStatus
State of the Battery Cabinet. It is an enumeration type:
If the enumeration value is 1, it indicates that the Inverter is in the normal state;
If the enumeration value is 2, it indicates that the Inverter is in the fau…
Enumeration
Enumerated Values:
1normal
2fault
255unknown
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.99
hwBatteryCabinetRowStatus
RowStatus fo Battery Cabinet table.
RowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
Description.
 .1.3.6.1.4.1.2011.6.164.1.14.2.1.1.100

hwEsduTable

table
.1.3.6.1.4.1.2011.6.164.1.15.2 · 1 row entry · 38 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEsduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwEsduTable' 
/
hwEsduEntry row .1.3.6.1.4.1.2011.6.164.1.15.2.1
/
Indexes
Column Syntax OID
hwEsduIndex
ESDU equip index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Battery Cabinet
Unsigned32
Constraints:
range: 3428-3443
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.1
hwEsduEquipId
Esdu device ID. Value range: 028,001 to 028,255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 28001-28255
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.2
hwEsduEquipName
/
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.3
hwEsduSetDigitalInput1AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.4
hwEsduDigitalInput1OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.5
hwEsduSetDigitalInput2AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.6
hwEsduDigitalInput2OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.7
hwEsduSetDigitalInput3AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.8
hwEsduDigitalInput3OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.9
hwEsduSetDigitalInput4AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.10
hwEsduDigitalInput4OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.11
hwEsduSetDigitalInput5AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.12
hwEsduDigitalInput5OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.13
hwEsduSetDigitalInput6AlarmCondition
Spare digital alarm state. It is an enumeration value.If the value of the node is 1, it indicates a high-tension alarm;If the value of the node is 2, it indicates a low-tension alarm;If the value of the node is 255, it …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.14
hwEsduDigitalInput6OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.15
hwEsduSetDigitalInput7AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.16
hwEsduDigitalInput7OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.17
hwEsduSetDigitalInput8AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.18
hwEsduDigitalInput8OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.19
hwEsduSetDigitalInput9AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.20
hwEsduDigitalInput9OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.21
hwEsduSetDigitalInput10AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.22
hwEsduDigitalInput10OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.23
hwEsduSetDigitalInput11AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.24
hwEsduDigitalInput11OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.25
hwEsduSetDigitalInput12AlarmCondition
Spare digital alarm state. It is an enumeration value.
If the value of the node is 1, it indicates a high-tension alarm;
If the value of the node is 2, it indicates a low-tension alarm;
If the value of the node is 255, …
Enumerationr/w
Enumerated Values:
1close
2open
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.26
hwEsduDigitalInput12OperStatus
It indicates the digital input operation status. It is an enumeration value.
If the value of the node is 1, it indicates that the diesel of state is normal;
If the value of the node is 2, it indicates that the diesel of…
Enumeration
Enumerated Values:
1normal
2alarm
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.27
hwEsduBtempValue
Temp1. It is an environment parameter collected in real time.
Value range: -40 to +80,
Unit: degC
and the value is an integer (1).
If the value is -1024, it indicates that the temperature sensor is not configured.
Integer32
Constraints:
range: -40-80
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.28
hwEsduBtempOperStatus
State of the site temp1 sensor. It is an enumeration type:
If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state;
If the enumeration value is 2, it indicates that the temp1 sens…
Enumeration
Enumerated Values:
1normal
2tempHigh
3tempLow
4notInslot
5tempFault
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.31
hwEsduTemp1Value
Temp1. It is an environment parameter collected in real time.
Value range: -40 to +80,
units: centigrade (degC),
and the value is an integer (1).
If the value is -1024, it indicates that the temperature sensor is n…
Integer32
Constraints:
range: -40-80
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.32
hwEsduTemp1HighLimit
Upper threshold of the temp1 alarm, can be configured by users.
Value range: 25 to 80,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value …
Integer32r/w
Constraints:
range: 25-80
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.33
hwEsduTemp1LowLimit
Lower threshold of the temp1 alarm, can be configured by users.
Value range: -20 to 20,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Integer32r/w
Constraints:
range: -20-20
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.34
hwEsduTemp1OperStatus
State of the site temp1 sensor. It is an enumeration type:
If the enumeration value is 1, it indicates that the site temp1 sensor is in the normal state;
If the enumeration value is 2, it indicates that the temp1 sens…
Enumeration
Enumerated Values:
1normal
2tempHigh
3tempLow
4notInslot
5tempFault
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.35
hwEsduTemp2Value
Temp2. It is an environment parameter collected in real time.
Value range: -40 to +80,
units: centigrade (degC),
and the value is an integer (1).
If the value is -1024, it indicates that the temperature sensor is n…
Integer32
Constraints:
range: -40-80
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.36
hwEsduTemp2HighLimit
Upper threshold of the temp2 alarm, can be configured by users.
Value range: 25 to 80,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value …
Integer32r/w
Constraints:
range: 25-80
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.37
hwEsduTemp2LowLimit
Lower threshold of the temp2 alarm, can be configured by users.
Value range: -20 to 20,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Integer32r/w
Constraints:
range: -20-20
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.38
hwEsduTemp2OperStatus
State of the site temp2 sensor. It is an enumeration type:
If the enumeration value is 1, it indicates that the site temp2 sensor is in the normal state;
If the enumeration value is 2, it indicates that the temp2 sens…
Enumeration
Enumerated Values:
1normal
2tempHigh
3tempLow
4notInslot
5tempFault
254alarmResume
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.39
hwEsduDoorSensorConnect
Door Sensor Connected; It is an enumeration value, and can be configured.
If the enumeration value is 1, it indicates Door Sensor is disable;
If the enumeration value is 2, it indicates Door Sensor is enalble;
If the e…
Enumerationr/w
Enumerated Values:
1disable
2enable
255unknown
 .1.3.6.1.4.1.2011.6.164.1.15.2.1.40

hwAcbGroupSampTable

table
.1.3.6.1.4.1.2011.6.164.1.17.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAcbGroupSampTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAcbGroupSampTable' 
/
hwAcbGroupSampEntry row .1.3.6.1.4.1.2011.6.164.1.17.1.1
/
Indexes
Column Syntax OID
hwAcbGroupIndex
The battery group equip Index.
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.1
hwAcbGroupEquipId
The battery group equip ID no.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.2
hwAcbGroupEquipName
The battery group equip name.
OctetString .1.3.6.1.4.1.2011.6.164.1.17.1.1.3
hwAcbGroupBatRunningState
State of the Battery group unit running state. It is an enumeration type:
If the enumeration value is 1, it indicates the Battery is first on line,
If the enumeration value is 2, it indicates that Battery power off,
If …
Enumeration
Enumerated Values:
1firstOn
2powerOff
3float
4equal
5dicharge
6charge
7test
255unknown
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.4
hwAcbGroupBatVolt
The battery volt; Value range: 0 to 100,
units: V.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.5
hwAcbGroupBatCurr
The battery current; Value range: -4000 to 4000,
units: A.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -40000-40000
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.6
hwAcbGroupTotalCapacity
The battery total capacity; Value range: 0 to 10000,
units: Ah.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.7
hwAcbGroupTotalRemainCapacity
The battery total remain capacity; Value range:0 to 100,
units: %.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.8
hwAcbGroupTemperature
The battery temperature; Value range:-50 to 100,
units: degC.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Integer32
Constraints:
range: -500-1000
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.9
hwAcbGroupBackupTime
The battery backup time; Value range: 0 to 256,
units: h.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-2560
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.11
hwAcbGroupEsmuCommNum
The esmu communicate number,
Value range: 0 to 100.
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.12
hwAcbGroupBatSoh
The battery soh: 0 to 100,
units: %.
and the value is accurate to one decimal place (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.13
hwAcbGroupTotalDischargeDepth
The battery total discharge depth,
units: %.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 10-1000
 .1.3.6.1.4.1.2011.6.164.1.17.1.1.22

hwAcbGroupSetTable

table
.1.3.6.1.4.1.2011.6.164.1.17.2 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAcbGroupSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAcbGroupSetTable' 
/
hwAcbGroupSetEntry row .1.3.6.1.4.1.2011.6.164.1.17.2.1
/
Indexes
Column Syntax OID
hwAcbGroupCellNum
Battery cell number.
Value range: 1 to 32,
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.5
hwAcbGroupSetTotalCapacity
The battery total capacity,
units: wh.
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.6
hwAcbGroupEqualVolt
Battery equalcharge voltage, can be configued by users.
Value range: 42 to 58,
units: v,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is inval…
Unsigned32r/w
Constraints:
range: 420-580
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.11
hwAcbGroupFloatVolt
Battery floatcharge voltage, can be configued by users.
Value range: 42 to 58,
units: v,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invali…
Unsigned32r/w
Constraints:
range: 420-580
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.12
hwAcbGroupChargeCurrLimitThr
Battery charge limited threhold , can be configued by users.
Value range: 0.05 to 2,
units: C10,
and the value is accurate to two decimal space (.01).
If the setting value is beyond the current support range, it will fa…
Unsigned32r/w
Constraints:
range: 5-200
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.13
hwAcbGroupOverCurThr
Battery over charge current limited threhold , can be configued by users.
Value range: 0.15 to 1.2,
units: C10,
and the value is accurate to two decimal space (.01).
If the value is 2147483647(0x7FFFFFFF), it indicates …
Unsigned32r/w
Constraints:
range: 15-120
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.14
hwAcbGroupHighTempThr
Upper threshold of the environment temperature alarm, can be configured by users.
Value range: 35 to 70,
units: centigrade (??C),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates tha…
Unsigned32r/w
Constraints:
range: 35-70
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.21
hwAcbGroupLowTempThr
Lower threshold of the environment temperature alarm, can be configured by users.
Value range: -50 to 0,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates th…
Integer32r/w
Constraints:
range: -50-0
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.22
hwAcbGroupDodToAcidBattery
The lithium battery discharge depth for Acid Battery running; ,units: %.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.26
hwAcbGroupDefaultChargeCurrLimitThr
Battery default charge limited threhold , can be configued by users.
Value range: 0.05 to 2,
units: C10,
and the value is accurate to two decimal space (.01).
If the setting value is beyond the current support rang…
Unsigned32r/w
Constraints:
range: 5-200
 .1.3.6.1.4.1.2011.6.164.1.17.2.1.27

hwAcbBaseTable

table
.1.3.6.1.4.1.2011.6.164.1.18.1 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAcbBaseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAcbBaseTable' 
/
hwAcbBaseEntry row .1.3.6.1.4.1.2011.6.164.1.18.1.1
/
Indexes
Column Syntax OID
hwAcbIndex
The battery equip Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.18.1.1.1
hwAcbEquipId
The battery equip ID no.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.18.1.1.2
hwAcbEquipName
The battery equip name.
OctetStringr/w .1.3.6.1.4.1.2011.6.164.1.18.1.1.3
hwAcbEquipAddr
The battery communica address.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.164.1.18.1.1.4
hwAcbSoftVar
The Battery software version.
OctetString .1.3.6.1.4.1.2011.6.164.1.18.1.1.5

hwAcbSampTable

table
.1.3.6.1.4.1.2011.6.164.1.18.2 · 1 row entry · 49 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAcbSampTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAcbSampTable' 
/
hwAcbSampEntry row .1.3.6.1.4.1.2011.6.164.1.18.2.1
/
Indexes
Column Syntax OID
hwAcbBatVolt
voltage of the battery. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 60,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it in…
Unsigned32
Constraints:
range: 0-600
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.1
hwAcbBatCurr
Current of the battery. It indicates the real-time statistics of the battery on the site.
Value range: -200 to 200,
unit: A,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Integer32
Constraints:
range: -2000-2000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.2
hwAcbRunningStatus
Battery charging state, indicates the charging and discharging information about the battery group. It is an enumeration type.
If the enumeration value is 1, it indicates a battery in the Offline state.
If the enumerat…
Enumeration
Enumerated Values:
1offline
2online
3sleep
4disconnect
5charge
6discharge
7standby
255unknown
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.3
hwAcbBatSoh
Soh of the battery. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 100,
unit: %,
and the value is accurate to two decimal place (1).
If the value is 2147483647(0x7FFFFFFF), it indica…
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.4
hwAcbBatCapacity
Capacity of the battery.
Value range: 0 to 10000,
unit: Ah,
and the value is accurate to two decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.5
hwAcbBatCell1Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.6
hwAcbBatCell2Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.7
hwAcbBatCell3Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.8
hwAcbBatCell4Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.9
hwAcbBatCell5Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.10
hwAcbBatCell6Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.11
hwAcbBatCell7Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.12
hwAcbBatCell8Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.13
hwAcbBatCell9Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.14
hwAcbBatCell10Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.15
hwAcbBatCell11Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.16
hwAcbBatCell12Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.17
hwAcbBatCell13Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.18
hwAcbBatCell14Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.19
hwAcbBatCell15Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.20
hwAcbBatCell16Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.21
hwAcbBatCell1Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.22
hwAcbBatCell2Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.23
hwAcbBatCell3Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.24
hwAcbBatCell4Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.25
hwAcbBatCell5Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.26
hwAcbBatCell6Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.27
hwAcbBatCell7Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.28
hwAcbBatCell8Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.29
hwAcbBatCell9Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.30
hwAcbBatCell10Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.31
hwAcbBatCell11Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.32
hwAcbBatCell12Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.33
hwAcbBatCell13Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.34
hwAcbBatCell14Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.35
hwAcbBatCell15Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.36
hwAcbBatCell16Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.37
hwAcbBatCell17Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.38
hwAcbBatCell18Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.39
hwAcbBatCell19Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.40
hwAcbBatCell20Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.41
hwAcbBatCell21Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.42
hwAcbBatCell22Temp
Temperature of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: -100 to 100,
units: centigrade(degC),
and the value is accurate to one decimal place (.1).
If the value is …
Integer32
Constraints:
range: -1000-1000
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.43
hwAcbBatCell17Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.44
hwAcbBatCell18Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.45
hwAcbBatCell19Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.46
hwAcbBatCell20Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.47
hwAcbBatCell21Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.48
hwAcbBatCell22Volt
Voltage of the battery cell. It indicates the real-time statistics of the battery on the site.
Value range: 0 to 5,
unit: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), i…
Unsigned32
Constraints:
range: 0-50
 .1.3.6.1.4.1.2011.6.164.1.18.2.1.49

hwAcbSetTable

table
.1.3.6.1.4.1.2011.6.164.1.18.3 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAcbSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAcbSetTable' 
/
hwAcbSetEntry row .1.3.6.1.4.1.2011.6.164.1.18.3.1
/
Indexes
Column Syntax OID
hwAcbGyroEnable
Gyro Function Enable,
Restricted use in special areas. If the value of the device is within the range, but the setting fails, the function is not supported.
It is an enumeration value:
If the enumeration value is 1, i…
Enumerationr/w
Enumerated Values:
1disable
2enable
255unknown
 .1.3.6.1.4.1.2011.6.164.1.18.3.1.5
hwAcbGyroSensitivityLevel
Gyro Level of Sensitivity.
Restricted use in special areas. If the value of the device is within the range, but the setting fails, the function is not supported.
It is an enumeration value:
If the enumeration value is 1…
Enumerationr/w
Enumerated Values:
1low
2midium
3high
255unknown
 .1.3.6.1.4.1.2011.6.164.1.18.3.1.6

hwSiteIboxTable

table
.1.3.6.1.4.1.2011.6.164.1.20.1 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteIboxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteIboxTable' 
/
hwSiteIboxEntry row .1.3.6.1.4.1.2011.6.164.1.20.1.1
/
Indexes
Column Syntax OID
hwIboxIndex
ibox table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of ibox
Unsigned32
Constraints:
range: 560-575
 .1.3.6.1.4.1.2011.6.164.1.20.1.1.1
hwIboxEquipId
ibox device ID. Value range: 029'001 to 029'255, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 29001-29255
 .1.3.6.1.4.1.2011.6.164.1.20.1.1.2
hwIboxEquipName
Ibox name, of the character string type, is used to specify battery cabinet. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.20.1.1.3
hwIbatEquipNum
Number of Batteries.
Value range: 0 to 96,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32r/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.6.164.1.20.1.1.4

hwSiteIbatTable

table
.1.3.6.1.4.1.2011.6.164.1.21.1 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteIbatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteIbatTable' 
/
hwSiteIbatEntry row .1.3.6.1.4.1.2011.6.164.1.21.1.1
/
Indexes
Column Syntax OID
hwIbatIndex
ibox table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of ibox
Unsigned32
Constraints:
range: 24576-26112
 .1.3.6.1.4.1.2011.6.164.1.21.1.1.1
hwIbatEquipId
ibat device ID. Value range: 030'001 to 031'537, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 30001-31537
 .1.3.6.1.4.1.2011.6.164.1.21.1.1.2
hwIbatEquipName
Ibat name, of the character string type, is used to specify battery cabinet. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.21.1.1.3
hwIbatTemperature
Ibat temperature. It is a ibat parameter collected in real time.
Value range: -50 to +125,
unit: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that ibox tem…
Integer32
Constraints:
range: -50-125
 .1.3.6.1.4.1.2011.6.164.1.21.1.1.4
hwIbatVoltage
Ibat Voltage of the ibat. It is an inherent attribute.
Value range: 0 to 100,
Units: V,
and the value is accurate to one decimal place (.1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is in…
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.21.1.1.5
hwIbatResistance
IbatResistance
Value range: 0 to 1000000,
units: (mohm),
and the value is accurate to two decimal place (.01).
Unsigned32
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.2011.6.164.1.21.1.1.6

hwSiteCommExBoardTable

table
.1.3.6.1.4.1.2011.6.164.1.22.1 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteCommExBoardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteCommExBoardTable' 
/
hwSiteCommExBoardEntry row .1.3.6.1.4.1.2011.6.164.1.22.1.1
/
Indexes
Column Syntax OID
hwCommExBoardIndex
Communication Expansion Board table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of Communication Expansion Board
Unsigned32
Constraints:
range: 1297-1301
 .1.3.6.1.4.1.2011.6.164.1.22.1.1.1
hwCommExBoardEquipId
Communication Expansion Board device ID. Value range: 032,256 to 033,249, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 32266-33049
 .1.3.6.1.4.1.2011.6.164.1.22.1.1.2
hwCommExBoardEquipName
Communication Expansion Board name, of the character string type, is used to specify battery cabinet. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.22.1.1.3

hwSiteDGCommExBoardTable

table
.1.3.6.1.4.1.2011.6.164.1.23.1 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteDGCommExBoardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteDGCommExBoardTable' 
/
hwSiteDGCommExBoardEntry row .1.3.6.1.4.1.2011.6.164.1.23.1.1
/
Indexes
Column Syntax OID
hwDGCommExBoardIndex
DG Communication Expansion Board table index,which value is according to the actual subject. Lines of the device list are restricted by the quantity of DG Communication Expansion Board
Unsigned32
Constraints:
range: 2185-2185
 .1.3.6.1.4.1.2011.6.164.1.23.1.1.1
hwDGCommExBoardEquipId
DG Communication Expansion Board device ID. Value range: 034'001, in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 34001-34001
 .1.3.6.1.4.1.2011.6.164.1.23.1.1.2
hwDGCommExBoardEquipName
DG Communication Expansion Board name, of the character string type, is used to specify battery cabinet. Users can configure it.
Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.23.1.1.3

hwElockEquipTable

table
.1.3.6.1.4.1.2011.6.164.1.27.1 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwElockEquipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwElockEquipTable' 
/
hwElockEquipEntry row .1.3.6.1.4.1.2011.6.164.1.27.1.1
/
Indexes
Column Syntax OID
hwElockEquipIndex
The elock equip Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.27.1.1.1
hwElockEquipId
The elock equip ID no.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.27.1.1.2
hwElockEquipName
The elock equip name.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.27.1.1.3

hwTemHumEquipTable

table
.1.3.6.1.4.1.2011.6.164.1.28.1 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTemHumEquipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwTemHumEquipTable' 
/
hwTemHumEquipEntry row .1.3.6.1.4.1.2011.6.164.1.28.1.1
/
Indexes
Column Syntax OID
hwTemHumEquipIndex
The tem_hum equip Index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.1
hwTemHumEquipId
The tem_hum equip ID no.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.2
hwTemHumEquipName
The tem_hum equip name.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.3
hwTemHumEquipAmbientTemp
the environment temperature.
units: centigrade (degC),
and the value is an integer (1).
Integer32
Constraints:
range: -20-80
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.4
hwTemHumEquipAmbientHumidity
environment temperature ,
units: %RH,
and the value is an integer (1).
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.5
hwSetHumTempUpperLimit
Upper threshold of the environment temperature alarm, can be configured by users.
Value range: 25 to 80,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicate…
Integer32r/w
Constraints:
range: 25-80
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.6
hwSetHumTempLowerLimit
Lower threshold of the environment temperature alarm, can be configured by users.
Value range: -20 to 20,
units: centigrade (degC),
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indica…
Integer32r/w
Constraints:
range: -20-20
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.7
hwSetHumidityUpperLimit
Upper threshold of the environment humility alarm, can be configured by users.
Value range: 0 to 100,
units: %RH,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.8
hwSetHumidityLowerLimit
Lower threshold of the environment humility alarm, can be configured by users.
Value range: 0 to 100,
units: %RH,
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.9
hwTemHumEquipAddress
Device address
And the value is an integer (1).
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.6.164.1.28.1.1.10

hwHeaterDeviceTable

table
.1.3.6.1.4.1.2011.6.164.1.29.1 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwHeaterDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwHeaterDeviceTable'
hwHeaterDeviceEntry row .1.3.6.1.4.1.2011.6.164.1.29.1.1
Indexes
Column Syntax OID
hwHeaterDeviceIndex
heater device table index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.29.1.1.1
hwHeaterDeviceEquipId
heater device equipid.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.29.1.1.2
hwHeaterDeviceEquipName
heater device equipname.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.164.1.29.1.1.3
hwHeaterStartTemperature
heater start temperature;
Value range:-10 to 15.Unit: degC.
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
note: hwHeaterStartTemperature's set value …
Integer32r/w
Constraints:
range: -10-15
 .1.3.6.1.4.1.2011.6.164.1.29.1.1.4
hwHeaterStopTemperature
heater stop temperature;
Value range: 5 to 20.Unit: degC.
and the value is an integer (1).
If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
note: hwHeaterStartTemperature's set value mus…
Integer32r/w
Constraints:
range: 5-20
 .1.3.6.1.4.1.2011.6.164.1.29.1.1.5

hwSiteDMUSampTable

table
.1.3.6.1.4.1.2011.6.164.1.31.1 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteDMUSampTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteDMUSampTable'
hwSiteDMUSampEntry row .1.3.6.1.4.1.2011.6.164.1.31.1.1
Indexes
Column Syntax OID
hwDMUIndex
DMU table index,
which value range:1 to 256.
Lines of the device list are restricted by the quantity of DMU.
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.164.1.31.1.1.1
hwDMUEquipId
DMU device ID.
Value range: 033'001 to 033'255,
in which the first digits indicate the device type and the last three digits indicate the device SN.
Unsigned32
Constraints:
range: 33001-33255
 .1.3.6.1.4.1.2011.6.164.1.31.1.1.2
hwDMUEquipName
Device name of the DMU module,
character string type, is used to specify the DMU module. Otherwise, the configured character can not be any other languages except English.
OctetString
Constraints:
range: 0-56
 .1.3.6.1.4.1.2011.6.164.1.31.1.1.3
hwDMUDCOutputVoltage
DC output voltage: 0 to 100,
units: V,
and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.2011.6.164.1.31.1.1.4
hwDMULoadCurrent
Load current: 0 to 30000,
units: A,
and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-300000
 .1.3.6.1.4.1.2011.6.164.1.31.1.1.5
hwDMUTotalLoadConsumption
Total load consumption: 0 to 4294967295,
units: kWh,
and the value is one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indicates that the value is invalid.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.6.164.1.31.1.1.6

hwSiteDMUSetTable

table
.1.3.6.1.4.1.2011.6.164.1.31.2 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteDMUSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteDMUSetTable'
hwSiteDMUSetEntry row .1.3.6.1.4.1.2011.6.164.1.31.2.1
Indexes
Column Syntax OID
hwSiteDMULoad1LvdEn
load1 lvd enable :It is an enumeration type:
If the enumeration value is 1, it means to disable the lvd control;
If the enumeration value is 2, it means to enable the lvd control
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.1
hwSiteDMULoad1LvdMode
load1 lvd mode :It is an enumeration type:
If the enumeration value is 1, it means the voltage mode;
If the enumeration value is 2, it means the time mode
Enumerationr/w
Enumerated Values:
1voltagemode
2timemode
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.2
hwSiteDMULoad1LvdVoltage
Low-voltage power-off voltage of the DMU unit can be configured by users.
Its value range: 36 to 56,
units: V,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicat…
Unsigned32r/w
Constraints:
range: 360-560
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.3
hwSiteDMULoad1LvdReconVoltage
Low-voltage power-off recover of the DMU unit can be configured by users.
Its value range: 37.0 to 58.0,
unit: V,
and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indic…
Unsigned32r/w
Constraints:
range: 370-580
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.4
hwSiteDMULoad1LvdTime
Low-voltage power-off disconnected time, It can be configured by users, and its value is an integer (1).
Here, if lvd mode is time mode, value range defines between 0 to 6000,
unit: minutes(min).
If the value is 2147…
Integer32r/w
Constraints:
range: 0-6000
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.5
hwSiteDMULoad1LvdCapacity
Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue.
Value range: 0 to 99,
unit: %,
and the value is accurate to one decimal place (.1). If the value is…
Integer32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.6
hwSiteDMULoad2LvdEn
load1 lvd enable :It is an enumeration type:
If the enumeration value is 1, it means to disable the lvd control;
If the enumeration value is 2, it means to enable the lvd control
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.7
hwSiteDMULoad2LvdMode
load1 lvd mode :It is an enumeration type:
If the enumeration value is 1, it means the voltage mode;
If the enumeration value is 2, it means the time mode
Enumerationr/w
Enumerated Values:
1voltagemode
2timemode
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.8
hwSiteDMULoad2LvdVoltage
Low-voltage power-off voltage of the DMU unit can be configured by users.
Its value range: 36 to 56,
units: V,
and the value is accurate to one decimal space (.1).
If the value is 2147483647(0x7FFFFFFF), it indicat…
Unsigned32r/w
Constraints:
range: 360-560
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.9
hwSiteDMULoad2LvdReconVoltage
Low-voltage power-off recover of the DMU unit can be configured by users.
Its value range: 37.0 to 58.0,
unit: V,
and the value is accurate to one decimal space (.1). If the value is 2147483647(0x7FFFFFFF), it indic…
Unsigned32r/w
Constraints:
range: 370-580
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.10
hwSiteDMULoad2LvdTime
Low-voltage power-off disconnected time, It can be configured by users, and its value is an integer (1).
Here, if lvd mode is time mode, value range defines between 0 to 6000,
unit: minutes(min).
If the value is 2147…
Integer32r/w
Constraints:
range: 0-6000
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.11
hwSiteDMULoad2LvdCapacity
Power-off unit control the power off, when Remaining capacity percentage of the battery strings is below the calue.
Value range: 0 to 99,
unit: %,
and the value is accurate to one decimal place (.1). If the value is …
Integer32r/w
Constraints:
range: 0-99
 .1.3.6.1.4.1.2011.6.164.1.31.2.1.12

hwAtsSampTable

table
.1.3.6.1.4.1.2011.6.164.1.33.1 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtsSampTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwAtsSampTable'
hwAtsSampEntry row .1.3.6.1.4.1.2011.6.164.1.33.1.1
Indexes
Column Syntax OID
hwAtsIndex
Table index of the running ATS modules
Unsigned32
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.164.1.33.1.1.1
hwAtsEquipId
ATS module ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.164.1.33.1.1.2
hwAtsEquipName
Device name of the ATS module
OctetString
Constraints:
range: 0-56
 .1.3.6.1.4.1.2011.6.164.1.33.1.1.3

hwSiteCameraTable

table
.1.3.6.1.4.1.2011.6.164.3.1 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSiteCameraTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EMAP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EMAP-MIB::hwSiteCameraTable' 
/
hwSiteCameraEntry row .1.3.6.1.4.1.2011.6.164.3.1.1
/
Indexes
Column Syntax OID
hwSiteCameraIp
the camera ip adress.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.1
hwSiteCameraPort
camera connect port number.
Enumeration
Enumerated Values:
1nim1com1
2nim1com2
3nim2com1
4nim2com2
 .1.3.6.1.4.1.2011.6.164.3.1.1.2
hwSiteCameraPhotSetAlarmType
You can set the alarm type to obtain the historical picture of the camera-related alarm shooting.
Enumerationr/w
Enumerated Values:
1dooralarm
2smokealarm
3wateralarm
4motiondetectalarm
 .1.3.6.1.4.1.2011.6.164.3.1.1.5
hwSiteCameraAssociatedAlarmPicture1
Associated alarm picture 1.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.6
hwSiteCameraAssociatedAlarmPicture2
Associated alarm picture 2.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.7
hwSiteCameraAssociatedAlarmPicture3
Associated alarm picture 3.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.8
hwSiteCameraAssociatedAlarmPicture4
Associated alarm picture 4.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.9
hwSiteCameraAssociatedAlarmPicture5
Associated alarm picture 5.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.10
hwSiteCameraAssociatedAlarmPicture6
Associated alarm picture 6.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.11
hwSiteCameraAssociatedAlarmPicture7
Associated alarm picture 7.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.12
hwSiteCameraAssociatedAlarmPicture8
Associated alarm picture 8.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.13
hwSiteCameraAssociatedAlarmPicture9
Associated alarm picture 9.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.14
hwSiteCameraAssociatedAlarmPicture10
Associated alarm picture 10.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.15
hwSiteCameraAdditionalAssociatedAlarmPictures
Additional associated alarm pictures.
OctetString .1.3.6.1.4.1.2011.6.164.3.1.1.16