ELTEX-PHY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
25

eltexPhyTransceiverInfoTable

table
.1.3.6.1.4.1.35265.52.1.1.3.1 · 1 row entry · 11 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltexPhyTransceiverInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-PHY-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-PHY-MIB::eltexPhyTransceiverInfoTable' 
This table show the information of interfaces transceivers.
eltexPhyTransceiverInfoEntry row .1.3.6.1.4.1.35265.52.1.1.3.1.1
The entry of the eltexPhyTransceiverInfoTable.
Indexes
No indexes recorded
Column Syntax OID
eltexPhyTransceiverInfoConnectorType
Connector type of the interface transceiver.
EltexPhyTransConnectorType
Type Values:
0unknown
1sc
2fibre-ch-st1
3fibre-ch-st2
4bnc-tnc
5fibre-ch-coaxial-headers
6fibrejack
7lc
8mt-rj
9mu
10sg
11optical-pigtail
12mpo-parallel-optic
32hssdc-ii
33copper-pigtail
34rj45
35no-separable-connector
127unallocated
255vendorspec
 .1.3.6.1.4.1.35265.52.1.1.3.1.1.1
eltexPhyTransceiverInfoType
Type of the interface transceiver.
EltexPhyTransType
Type Values:
0unknown
1gbic
2sff
3sfp-sfpplus
4xbi-300-pin
5xenpak
6xfp
7xff
8xfp-e
9xpak
10x2
11dwdm-sfp
12qsfp
13qsfpplus
127reserved
255vendorspec
 .1.3.6.1.4.1.35265.52.1.1.3.1.1.2
eltexPhyTransceiverInfoComplianceCode
Compliance code of the interface transceiver.
OctetString .1.3.6.1.4.1.35265.52.1.1.3.1.1.3
eltexPhyTransceiverInfoWaveLength
Wave length of the interface transceiver, measured in nanometer.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.1.3.1.1.4
eltexPhyTransceiverInfoVendorName
Vendor name of the interface transceiver.
OctetString .1.3.6.1.4.1.35265.52.1.1.3.1.1.5
eltexPhyTransceiverInfoSerialNumber
Serial number of the interface transceiver.
OctetString .1.3.6.1.4.1.35265.52.1.1.3.1.1.6
eltexPhyTransceiverInfoFiberDiameter
Fiber diameter of the interface transceiver.
EltexPhyTransFiberDiameter
Type Values:
1fiber9
2fiber50
3fiber625
4copper
65535unknown
 .1.3.6.1.4.1.35265.52.1.1.3.1.1.7
eltexPhyTransceiverInfoTransferDistance
The maximal distance which the interface transceiver
could transmit, measured in meter.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.1.3.1.1.8
eltexPhyTransceiverInfoDiagnosticSupported
Indicating whether the digital diagnostic monitoring function
is supported or not on the interface transceiver.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.35265.52.1.1.3.1.1.9
eltexPhyTransceiverInfoPartNumber
Part number of the interface transceiver provided by SFP vendor.
OctetString .1.3.6.1.4.1.35265.52.1.1.3.1.1.10
eltexPhyTransceiverInfoVendorRevision
Revision level for part number provided by vendor.
OctetString .1.3.6.1.4.1.35265.52.1.1.3.1.1.11

eltexPhyTransceiverDiagnosticTable

table
.1.3.6.1.4.1.35265.52.1.1.3.2 · 1 row entry · 8 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltexPhyTransceiverDiagnosticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-PHY-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-PHY-MIB::eltexPhyTransceiverDiagnosticTable' 
This table show current DDM values and thresholds 
of the interface transceiver.
eltexPhyTransceiverDiagnosticEntry row .1.3.6.1.4.1.35265.52.1.1.3.2.1
The entry of the eltexPhyTransceiverDiagnosticTable.
Indexes
No indexes recorded
Column Syntax OID
eltexPhyTransceiverDiagnosticType
Type of the transceiver diagnostic.
EltexPhyTransDiagnosticType
Type Values:
1temperature
2supplyVoltage
3txBiasCurrent
4txOpticalPower
5rxOpticalPower
6lossOfSignal
 .1.3.6.1.4.1.35265.52.1.1.3.2.1.1
eltexPhyTransceiverDiagnosticChannel
Transceiver channel number.
Integer32 .1.3.6.1.4.1.35265.52.1.1.3.2.1.2
eltexPhyTransceiverDiagnosticUnits
Unit of measure for current diagnostic type.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.35265.52.1.1.3.2.1.3
eltexPhyTransceiverDiagnosticHighAlarmThreshold
Transceiver HighAlarm threshold for current diagnostic type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.1.3.2.1.4
eltexPhyTransceiverDiagnosticHighWarningThreshold
Transceiver HighWarning threshold for current diagnostic type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.1.3.2.1.5
eltexPhyTransceiverDiagnosticLowWarningThreshold
Transceiver LowWarning threshold for current diagnostic type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.1.3.2.1.6
eltexPhyTransceiverDiagnosticLowAlarmThreshold
Transceiver LowAlarm threshold for current diagnostic type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.1.3.2.1.7
eltexPhyTransceiverDiagnosticCurrentValue
Measured value for current transceiver diagnostic type.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.1.3.2.1.8

eltexPhyTestSetTable

table
.1.3.6.1.4.1.35265.52.1.2.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltexPhyTestSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-PHY-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-PHY-MIB::eltexPhyTestSetTable' 
A table containing objects for invoking tests on an interface.
eltexPhyTestSetEntry row .1.3.6.1.4.1.35265.52.1.2.1.1.1
An entry containing objects for invoking tests on an interface.
Indexes
No indexes recorded
Column Syntax OID
eltexPhyTestSetType
A control variable used to start operator initiated interface
tests.
EltexPhyTestSetTyper/w
Type Values:
1cableStatus
 .1.3.6.1.4.1.35265.52.1.2.1.1.1.1

eltexPhyTestGetTable

table
.1.3.6.1.4.1.35265.52.1.2.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltexPhyTestGetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-PHY-MIB' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-PHY-MIB::eltexPhyTestGetTable' 
A table containing results of tests on an interface.
eltexPhyTestGetEntry row .1.3.6.1.4.1.35265.52.1.2.1.2.1
An entry containing results of tests on an interface.
Indexes
No indexes recorded
Column Syntax OID
eltexPhyTestGetType
The type of test the user performed.
EltexPhyTestGetType
Type Values:
1channelAShort
2channelBShort
3channelCShort
4channelDShort
5channelAOpen
6channelBOpen
7channelCOpen
8channelDOpen
9channelAMismatch
10channelBMismatch
11channelCMismatch
12channelDMismatch
13channelALineDriver
14channelBLineDriver
15channelCLineDriver
16channelDLineDriver
17channelALength
18channelBLength
19channelCLength
20channelDLength
21channelACross
22channelBCross
23channelCCross
24channelDCross
 .1.3.6.1.4.1.35265.52.1.2.1.2.1.1
eltexPhyTestGetStatus
This object contains the status of the most recently
requested test for operator initiated tests or the value
none(1) if no tests have been requested since the last
reset. For non operator initiated tests the value is a…
EltexPhyTestGetStatus
Type Values:
1none
2success
3inProgress
4notSupported
5unableToRun
6aborted
7failed
 .1.3.6.1.4.1.35265.52.1.2.1.2.1.2
eltexPhyTestGetResult
This object holds the test result
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.35265.52.1.2.1.2.1.3
eltexPhyTestGetUnits
The test result unit of measure. The units can be standard unit or special units
that are designed for special test.
EltexPhyTestGetUnits
Type Values:
1integer
2boolean
3meter
 .1.3.6.1.4.1.35265.52.1.2.1.2.1.4
eltexPhyTestGetTimeStamp
The time in string (formated DD-MMM-YYYY HH:MM:SS e.g
14-Apr-2002 10:33:31)
OctetString .1.3.6.1.4.1.35265.52.1.2.1.2.1.5