ELTEX-MES-eltInterfaces Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
21

eltSwIfTable

table
.1.3.6.1.4.1.35265.1.23.43.1 · 1 row entry · 11 columns
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltSwIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-eltInterfaces' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-eltInterfaces::eltSwIfTable'
Switch media specific information and configuration of the device
interfaces.
eltSwIfEntry row .1.3.6.1.4.1.35265.1.23.43.1.1
Defines the contents of each line in the eltSwIfTable table.
Indexes
Column Syntax OID
Index to the eltSwIfTable. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIB II).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.35265.1.23.43.1.1.1
This variable indicates plugged in SFP transceiver operation mode.
Enumeration
Enumerated Values:
0fiber
1directAttach
2copperSfp
3unknown
.1.3.6.1.4.1.35265.1.23.43.1.1.2
When enabled the link can be established by bypassing the Auto-Negotiation procedure
if the link partner doesn't respond to the Auto-Negotiation process.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3forced
.1.3.6.1.4.1.35265.1.23.43.1.1.3
This variable defines the maximum number of dynamic VoiceVlan addresses that
can be associated with the locked interface. It isn't relevant in
disabled limitation mode.
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.35265.1.23.43.1.1.4
This variable defines the maximum number of dynamic DataVlan addresses that
can be associated with the locked interface. It isn't relevant in
disabled limitation mode.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.35265.1.23.43.1.1.5
This variable indicates the actual number of dynamic VoiceVlan addresses that can
be associated with the locked interface. It isn't relevant in disabled
limitation mode.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.35265.1.23.43.1.1.6
This variable indicates the actual number of dynamic DataVlan addresses that can
be associated with the locked interface. It isn't relevant in disabled
limitation mode.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.35265.1.23.43.1.1.7
This object indicates the VLAN range (1-1024)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.35265.1.23.43.1.1.8
This object indicates the VLAN range (1025-2048)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.35265.1.23.43.1.1.9
This object indicates the VLAN range (2049-3072)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.35265.1.23.43.1.1.10
This object indicates the VLAN range (3073-4094)
that belongs to the list of VLANs blocked due to
Port Security violation event.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.35265.1.23.43.1.1.11
.1.3.6.1.4.1.35265.1.23.43.2 · 1 row entry · 10 columns
Uses the eltex variant from /opt/observium/mibs/eltex.
Command help
Walk eltSwIfUtilizationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ELTEX-MES-eltInterfaces' -M '/opt/observium/mibs/eltex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ELTEX-MES-eltInterfaces::eltSwIfUtilizationTable'
Switch ports utilization configuration and information.
eltSwIfUtilizationEntry row .1.3.6.1.4.1.35265.1.23.43.2.1
Defines the contents of each line in the eltSwIfUtilizationTable table.
Column Syntax OID
A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.35265.1.23.43.2.1.1
An average load time in seconds for which interface
utilization is calculated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.35265.1.23.43.2.1.2
The total number of all (UC, MC and BC) packets
received on the interface during last 5 seconds.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.3
The inbound rate in kbit/sec
on the interface during last 5 seconds.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.4
The total number of all (UC, MC and BC) packets
sent out of the interface during last 5 seconds.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.5
The outbound rate in kbit/sec
on the interface during last 5 seconds.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.6
The total number of all (UC, MC and BC) packets
received on the interface during configured
load average time for this interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.7
The inbound rate in kbit/sec on the interface
during configured load average time for this interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.8
The total number of all (UC, MC and BC) packets
sent out of the interface during configured
load average time for this interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.9
The outbound rate in kbit/sec on the interface
during configured load average time for this interface.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.35265.1.23.43.2.1.10