ELTEX-MES-ISS-VLAN-MIB Table View

A table that contains information about unicast entries
for which the device has forwarding and/or filtering
information sorted additionally by port. This information
is used by the transparent bridging function in determining
how to propagate a received frame.

eltMesIssVlanFdbPortEntry row .1.3.6.1.4.1.35265.1.139.3.1.1.1.1

Information about a specific unicast MAC address for which the device
has some forwarding and/or filtering information.

Indexes

IF-MIBifIndex eltMesIssVlanFdbPortVlanId eltMesIssVlanFdbPortMacAddress

Column	Syntax	OID
eltMesIssVlanFdbPortVlanId A FDB id or VLAN id for which vlan the device has forwarding and/or filtering information.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.35265.1.139.3.1.1.1.1.1
eltMesIssVlanFdbPortMacAddress A unicast MAC address for which the device has forwarding and/or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.35265.1.139.3.1.1.1.1.2
eltMesIssVlanFdbPortEntryStatus The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of eltMesIssVlanFdbPort, nor an …	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.35265.1.139.3.1.1.1.1.3

This table augments the dot1qFutureVlanPortTable table.

eltMesIssVlanPortEntry row .1.3.6.1.4.1.35265.1.139.3.1.2.1.1

Each entry in this table is an interface in the system such as
physical port or port-channel.

Indexes

No indexes recorded

Column	Syntax	OID
eltMesIssVlanDot1qTunnelStatus 802.1q tunneling feature allows to transparently transmit customer traffic through a provider network by encapsulating the outer (Q-in-Q) VLAN tag into the customer packets. If 802.1q tunnel is enabled on…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.1
eltMesIssVlanPortSecurityMacLimit The Limiting value on the number of distinct unicast destination MAC addresses that can be dynamically learnt over this interface. The lower limit and upper limit value that can be SET for this object is determined by t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.2
eltMesIssVlanPortSecurityStatus This variable indicates whenever port security feature is enabled on port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.3
eltMesIssVlanPortSecurityMode This variable indicates what is the learning limitation on the locked interface.	EltMesIssPortSecurityModer/w Type Values: 1 disabled 2 dynamic 3 secure-permanent 4 secure-delete-on-reset	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.4
eltMesIssVlanPortDefaultVlanTagged The Default Vlan Tagged feature allows to configure the default VLAN on this port to be tagged, while untagged default VLAN is the default setting. This might be useful in case of setting up all 4K VLANs as tagged is re…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.5
eltMesIssVlanPortMvrVlanId This object is used to configure switchport multicast-vlan on port. To remove multicast TV vlan from port use eltMesIssVlanPortMvrVlanId = 0.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.6
eltMesIssVlanPortMvrVlanTagged This configuration allows to set multicast TV vlan on this port to be tagged or untagged.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.7
eltMesIssVlanPortDefaultVlanForbidden This configuration allows to prohibit default vlan on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.8
eltMesIssVlanPortEgressFiltering This configuration allows to transmit packets from egress port without appropriate VLAN tag. When this is true(1) the device will discard outcoming frames for VLANs which do not include this Port in its M…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.1.1.9

A table that contains VID sets used for MAC-based VLAN Classification.

eltMesIssMacBasedVlanPortEntry row .1.3.6.1.4.1.35265.1.139.3.1.2.3.1

A VID set for a port and group.

Indexes

IF-MIBifIndex eltMesIssMacBasedVlanPortGroupId

Column	Syntax	OID
eltMesIssMacBasedVlanPortGroupId Designates a group of Ranges in the ranges Group Database.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.35265.1.139.3.1.2.3.1.1
eltMesIssMacBasedVlanPortGroupVid The VID associated with a group of range MAC addresses for each port.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.35265.1.139.3.1.2.3.1.2
eltMesIssMacBasedVlanPortMcastBcastOption Configurable option for discarding/allowing Multicast/Broadcast untagged frames. The value allow (1) indicates that Multicast/Broadcast frames with source MAC address as in the MAC VLAN entry will be dropped if MAC bas…	Enumerationr/w Enumerated Values: 1 allow 2 suppress	.1.3.6.1.4.1.35265.1.139.3.1.2.3.1.3
eltMesIssMacBasedVlanPortRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.1.139.3.1.2.3.1.4

A table containing per port configuration information
for Voice VLAN. All entries are permanent and will be
restored after the device is reset.

eltMesIssVoiceVlanPortEntry row .1.3.6.1.4.1.35265.1.139.3.1.2.4.1

Per port information for a Voice VLAN.

Indexes

IF-MIBifIndex

Column	Syntax	OID
eltMesIssVoiceVlanPortEnable This field contains the Voice VLAN state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.4.1.1
eltMesIssVoiceVlanPortVlanIndex This field contains the Voice VLAN ID, default value means using setting from eltMesIssVoiceVlanGlobalVlanIndex. Per port Voice VLAN ID takes precedence over global setting.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.35265.1.139.3.1.2.4.1.2
eltMesIssVoiceVlanPortAuthenticationBypass An optional parameter that allows to assign voice VLAN without authentication via dot1x.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.3.1.2.4.1.3

The table lists the per vlan parameters.

eltMesIssDot1qVlanStaticEntry row .1.3.6.1.4.1.35265.1.139.3.1.3.1.1

This table expands existing table dot1qVlanStaticTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
eltMesIssDot1qVlanStaticCos Vlan egress CoS value for traffic being sent from CPU.	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.35265.1.139.3.1.3.1.1.1

A table that contains mappings from Range of MAC addresses to Group
Identifiers used for MAC-based VLAN Classification.

eltMesIssMacBasedVlanGroupEntry row .1.3.6.1.4.1.35265.1.139.3.1.3.2.1

A mapping from a Range of MAC addresses to a Group Identifier.

Indexes

eltMesIssMacBasedVlanMacAddress eltMesIssMacBasedVlanMacMask

Column	Syntax	OID
eltMesIssMacBasedVlanMacAddress The base MAC address of the range.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.35265.1.139.3.1.3.2.1.1
eltMesIssMacBasedVlanMacMask The MAC mask of the range.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.35265.1.139.3.1.3.2.1.2
eltMesIssMacBasedVlanGroupId Represents a group of ranges of MAC addresses that are associated together when assigning a VID to a frame.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.35265.1.139.3.1.3.2.1.3
eltMesIssMacBasedVlanGroupRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.1.139.3.1.3.2.1.4

A table containing static global configuration information
for Voice VLANs OUI MAC Prefixes. All entries are permanent
and will be restored after the device is reset.

eltMesIssVoiceVlanOUIEntry row .1.3.6.1.4.1.35265.1.139.3.1.3.3.1

Information for a Voice VLANs OUI MAC Prefixes configured
into the device by management.

Indexes

eltMesIssVoiceVlanOUIPrefix

Column	Syntax	OID
eltMesIssVoiceVlanOUIPrefix The index value used to identify the OUI MAC Prefix component associated with this entry. Voice VLANs OUI prefix is the first 3 most significant octets of the MAC address.	OctetString Constraints: range: 3-3	.1.3.6.1.4.1.35265.1.139.3.1.3.3.1.1
eltMesIssVoiceVlanOUIDescription An optional text that describes the OUI.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.35265.1.139.3.1.3.3.1.2
eltMesIssVoiceVlanOUIEntryRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.1.139.3.1.3.3.1.3

A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received. This table
maintains context ID as one more index to support
Multiple Instances.

eltMesIssVlanCurrentEntry row .1.3.6.1.4.1.35265.1.139.3.1.4.1.1

Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received.

Indexes

fsDot1qVlanContextId Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
eltMesIssVlanFdbId The Filtering Database used by this VLAN. This is one of the fsDot1qFdbId values in the fsDot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or b…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.1.139.3.1.4.1.1.1
eltMesIssVlanStatus This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, correspondi…	Enumeration Enumerated Values: 1 other 2 permanent 3 dynamicGvrp	.1.3.6.1.4.1.35265.1.139.3.1.4.1.1.2
eltMesIssVlanCreationTime The value of sysUpTime when this VLAN was created.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.1.139.3.1.4.1.1.3