ELTEX-MES-ISS-ACL-MIB Table View

This table augments the issL2FilterTable table.

eltMesIssAclL2FilterEntry row .1.3.6.1.4.1.35265.1.139.1.1.1.1

Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number. An entry in this
table will be created when the L2 Filter entry (issL2FilterStatus)
in the fsissext.mib is created.

Indexes

No indexes recorded

Column	Syntax	OID
eltMesIssAclL2FilterDstMacAddrMask Specifies the mask for the packet's destination MAC address. Only masked bits will be used to filter a packet by the destination MAC address. By default, all bits are masked, i.e. the whole address will be compared with…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.35265.1.139.1.1.1.1.1
eltMesIssAclL2FilterSrcMacAddrMask Specifies the mask for the packet's source MAC address. Only masked bits will be used to filter a packet by the source MAC address. By default, all bits are masked, i.e. the whole address will be compared with a filter.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.35265.1.139.1.1.1.1.2
eltMesIssAclL2FilterUserDefinedBytesValue Specifies the values of bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field refers to a single eltMesIssAclUdbOffsetConfigEntry.	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.35265.1.139.1.1.1.1.3
eltMesIssAclL2FilterUserDefinedBytesMask Specifies the mask for bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field refers to a single eltMesIssAclUdbOffsetConfigEntry.	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.35265.1.139.1.1.1.1.4
eltMesIssAclL2FilterDesc A user defined textual string which contains ACL description.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.35265.1.139.1.1.1.1.5

This table augments the issL3FilterTable table.

eltMesIssAclL3FilterEntry row .1.3.6.1.4.1.35265.1.139.1.2.1.1

Each entry in this table is a L3 filter rule.
Index to the table is the L3 filter number. An entry in this
table will be created when the L3 Filter entry (issL3FilterStatus)
in the fsissext.mib is created.

Indexes

No indexes recorded

Column	Syntax	OID
eltMesIssAclL3FilterUserDefinedBytesValue Specifies the values of bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field refers to a single eltMesIssAclUdbOffsetConfigEntry.	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.35265.1.139.1.2.1.1.1
eltMesIssAclL3FilterUserDefinedBytesMask Specifies the mask for bytes in a filtered packet which are located by UDB offsets configured in ltMesIssAclUdbOffsetConfigTable. Each two bytes in this field refers to a single eltMesIssAclUdbOffsetConfigEntry.	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.35265.1.139.1.2.1.1.2
eltMesIssAclL3FilterTrafficClass The IP Traffic Class value to be checked against the packet. This value covers both DSCP and ECN fields. A value of '-1' means the Traffic Class field becomes dont care.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.35265.1.139.1.2.1.1.3
eltMesIssAclL3FilterDesc A user defined textual string which contains ACL description.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.35265.1.139.1.2.1.1.4

This table allows to configure user-defined bytes for ACL.

eltMesIssAclUdbOffsetConfigEntry row .1.3.6.1.4.1.35265.1.139.1.3.1.1

An entry in eltMesIssAclUdbOffsetConfigTable.

Indexes

eltMesIssAclUdbOffsetIndex

Column	Syntax	OID
eltMesIssAclUdbOffsetIndex The numerical index of offset value.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.35265.1.139.1.3.1.1.1
eltMesIssAclUdbOffsetType The starting position in a packet the offset will be counted from.	Enumerationr/w Enumerated Values: 1 destMacAddress 2 layer2FramePayload 3 layer3HeaderOrArp 4 layer4Header	.1.3.6.1.4.1.35265.1.139.1.3.1.1.2
eltMesIssAclUdbOffsetByte The offset value in bytes.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.35265.1.139.1.3.1.1.3

This table augments the issAclRateCtrlTable table.

eltMesIssAclRateCtrlEntry row .1.3.6.1.4.1.35265.1.139.1.4.1.1

An entry appears in this table for each physical and port-channel
interface in the switch.

Indexes

No indexes recorded

Column	Syntax	OID
eltMesIssAclRateCtrlDlfLimitKbpsValue Allows to configure the limiting value for the maximum number of dlf kilobits that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Destination lookup f…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.1.1.1
eltMesIssAclRateCtrlBcastLimitKbpsValue Allows to configure the limiting value for the maximum number of broadcast kilobits that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Broadcast kilo…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.1.1.2
eltMesIssAclRateCtrlMcastLimitKbpsValue Allows to configure the limiting value for the maximum number of multicast kilobits that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Multicast kilo…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.1.1.3
eltMesIssAclRateCtrlDlfLimitPpsValue Allows to configure the limiting value for the maximum number of dlf packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Destination lookup fa…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.1.1.4
eltMesIssAclRateCtrlBcastLimitPpsValue Allows to configure the limiting value for the maximum number of broadcast packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Broadcast packe…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.1.1.5
eltMesIssAclRateCtrlMcastLimitPpsValue Allows to configure the limiting value for the maximum number of multicast packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Multicast packe…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.1.1.6
eltMesIssAclRateCtrlIgrBandwidth Configures the interface ingress bandwidth measured in Kbit per second. All ingress traffic that exceeds the configured rate will be dropped. Rate limiting will be performed with granularity of 16 Kbps. A…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.1.1.7
eltMesIssAclRateCtrlDlfLimitAction Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for dlf packets.	EltMesIssAclRateCtrlActionTyper/w Type Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.35265.1.139.1.4.1.1.8
eltMesIssAclRateCtrlBcastLimitAction Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for broadcast packets.	EltMesIssAclRateCtrlActionTyper/w Type Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.35265.1.139.1.4.1.1.9
eltMesIssAclRateCtrlMcastLimitAction Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for multicast packets.	EltMesIssAclRateCtrlActionTyper/w Type Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.35265.1.139.1.4.1.1.10

A table of the rate limiting parameters and the storm type
for each physical and port-channel interface in the switch.

eltMesIssStormCtrlEntry row .1.3.6.1.4.1.35265.1.139.1.4.3.1

An entry in eltMesIssStormCtrlTable.

Indexes

IF-MIBifIndex eltMesIssAclStormCtrlType

Column	Syntax	OID
eltMesIssAclStormCtrlType The storm type.	EltMesIssAclStormCauseType Type Values: 1 unicast 2 broadcast 3 multicast	.1.3.6.1.4.1.35265.1.139.1.4.3.1.1
eltMesIssAclStormDetected Detected/Cleared storm on the interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.139.1.4.3.1.2
eltMesIssAclStormPortAction Specifies the action to be taken if configured limiting value (in pps or kbps) is exceeded for packets. This field is functionally the same as eltMesIssAclRateCtrlDlfLimitAction, eltMesIssAclRateCtrlBcast…	EltMesIssAclRateCtrlActionTyper/w Type Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.35265.1.139.1.4.3.1.3
eltMesIssAclStormPortLimitKbpsValue The limiting value for the maximum number of kilobits that can be transmitted per second over this interface. The zero value of this object means disable rate limiting on this interface. This field is fun…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.3.1.4
eltMesIssAclStormPortLimitPpsValue The limiting value for the maximum number of packets that can be transmitted per second over this interface. The zero value of this object means disable rate limiting on this interface. This field is func…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.35265.1.139.1.4.3.1.5

This table contains bindings of ACL filters to interfaces.

eltMesIssAclIfEntry row .1.3.6.1.4.1.35265.1.139.1.5.1.1

Each entry in this table describes the binding of ACL filter
to a specific interface.

Indexes

eltMesIssAclIfType eltMesIssAclIfIndex eltMesIssAclFilterDirection eltMesIssAclFilterType eltMesIssAclFilterIndex

Column	Syntax	OID
eltMesIssAclIfType Interface type.	EltMesIssAclInterfaceType Type Values: 1 vlan	.1.3.6.1.4.1.35265.1.139.1.5.1.1.1
eltMesIssAclIfIndex Interface index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.139.1.5.1.1.2
eltMesIssAclFilterDirection Filter direction.	EltMesIssAclFilterDirection Type Values: 1 input	.1.3.6.1.4.1.35265.1.139.1.5.1.1.3
eltMesIssAclFilterType Filter type.	EltMesIssAclFilterType Type Values: 1 aclL2Filter 2 aclL3Filter	.1.3.6.1.4.1.35265.1.139.1.5.1.1.4
eltMesIssAclFilterIndex Filter index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.139.1.5.1.1.5
eltMesIssAclIfRowStatus Row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.1.139.1.5.1.1.6