ELTEX-MES-BRIDGE-EXT-MIB Table View

Per VLAN MAC learning table.

eltBridgeExtMacLearningVlanEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.0.1.1

VLAN MAC learning entry.

Indexes

eltBridgeExtMacLearningVlanIndex

Column	Syntax	OID
eltBridgeExtMacLearningVlanIndex Indicates the VLAN number.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.35265.1.23.1.401.0.0.1.1.1
eltBridgeExtMacLearningVlanEnabled Indicates whether the MAC addresses learning is enabled in this VLAN or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.0.1.1.2

A table that contains STP/RSTP/MSTP. Configurations for STP
and RSTP are stored in the zero instance.

eltdot1sMstpInstanceEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1

A list of information maintained by every instance
about the multiple Spanning Tree Protocol state for
that instance.

Indexes

No indexes recorded

Column	Syntax	OID
eltdot1sMstpInstanceLastTopologyChangePort This value contain port ifIndex from which the request about the last change of topology came. If value is 0 - topology wasn't changed yet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.1
eltdot1sMstpInstanceTcProtectionEnable Indicates the status of TC Protection feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.2
eltdot1sMstpInstanceTcProtectionInterval The time taken by the switch to process the maximum of TC BPDUs.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.3
eltdot1sMstpInstanceTcProtectionThresholdValue The maximum number of MAC entry flushes that the device can perform within set interval.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.4
eltdot1sMstpInstanceNumOfTcBpduHandled The number of topology change BPDU handled by the current instance.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.1.23.1.401.0.3.4.1.5

A table that contains pair <msti, port> specific information
for the Spanning Tree Protocol.

eltdot1sMstpInstancePortEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.3.5.1

A list of information maintained by every pair <msti, port>
about the Spanning Tree Protocol state for that pair.

Indexes

No indexes recorded

Column	Syntax	OID
eltdot1sMstpInstancePortRestrictedRole If TRUE causes the Port not to be selected as Root Port for the MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.3.5.1.1

Port configuration table for Spanning Tree Protocol.

eltBridgeStpConfigPortEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.5.1.1

Port configuration entry for Spanning Tree Protocol.

Indexes

BRIDGE-MIBdot1dBasePort

Column	Syntax	OID
eltBridgeStpConfigPortGroupMacAddress Sets destination MAC address for Bridge PDUs. A port sends and receives BPDUs only with specified group MAC address.	EltBridgeStpGroupMacAddressTyper/w Type Values: 1 dot1d 2 dot1ad	.1.3.6.1.4.1.35265.1.23.1.401.0.5.1.1.1
eltBridgeStpConfigPortRestrictedTcn Configure filtering of Spanning Tree BPDUs with TC flag set.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.5.1.1.2

A table containing a list of the bridge ports 
for which Spanning Tree LoopGuard capability
can be configured.

eltBridgeStpLoopGuardConfigEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.5.3.2.1

A entry of table with a list of bridge ports
for which Spanning Tree LoopGuard capability
can be configured.

Indexes

eltBridgeStpLoopGuardConfigPortIndex

Column	Syntax	OID
eltBridgeStpLoopGuardConfigPortIndex The value of dot1dBasePort for bridge port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.5.3.2.1.1
eltBridgeStpLoopGuardConfigMode Indicates the mode of LoopGuard feature on this port. This configuration will be applied to all the spanning tree instances in which this port exists.	EltBridgeStpLoopGuardConfigModer/w Type Values: 1 enable 2 disable 3 default	.1.3.6.1.4.1.35265.1.23.1.401.0.5.3.2.1.2

A table containing a list of the bridge ports for which 
a particular Spanning Tree instance has been found to 
have some inconsistent state. The agent creates a new entry 
in this table whenever it detects a new inconsistency, 
and deletes entries when/soon after the inconsistency 
is no longer present.

eltBridgeStpInconsistencyEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1

A Spanning Tree instance on a particular port for which
a Spanning Tree inconsistent state is currently in effect.

Indexes

eltBridgeStpInconsistencyIndex eltBridgeStpInconsistencyPortIndex

Column	Syntax	OID
eltBridgeStpInconsistencyIndex The spanning tree instance id.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1.1
eltBridgeStpInconsistencyPortIndex The value of dot1dBasePort for bridge port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1.2
eltBridgeStpInconsistencyState Indicates whether the port in a particular Spanning Tree instance is currently in inconsistent state or not.	EltBridgeStpInconsistencyStateType Type Values: 1 none 2 loop 3 root	.1.3.6.1.4.1.35265.1.23.1.401.0.5.3.3.1.3

A table that contains configuration
for each PVST instance.

eltBridgePvstConfigEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1

An entry that contains configuration
of the certain PVST instance.

Indexes

eltBridgePvstVlanIndex

Column	Syntax	OID
eltBridgePvstVlanIndex VLAN tag that identifies PVST instance.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.1
eltBridgePvstConfigEnable Indicates the status of PVST instance	EltBridgePvstEnableTyper/w Type Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.2
eltBridgePvstConfigFwdDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the VLAN stays in each of the Li…	BRIDGE-MIBTimeoutr/w	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.3
eltBridgePvstConfigHelloTime The amount of time between the transmission of Configuration PDUs by this node on VLAN's ports when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual valu…	BRIDGE-MIBTimeoutr/w	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.4
eltBridgePvstConfigMaxAge The maximum age of PVST information learned from the network on any VLAN's port before it is discarded, in units of hundredths of a second. This is the actual value that this VLAN is currently using.	BRIDGE-MIBTimeoutr/w	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.5
eltBridgePvstConfigPriority The value of the writable portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID ORed (logical addition) with current VLAN ID. The other (last) 6 octets of the Bridge ID are given by the va…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.6
eltBridgePvstConfigFilterBpdu Specified if PVST-instance should filter BPDUs when STP is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.7
eltBridgePvstConfigTcProtectionEnable Indicates the status of TC Protection feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.8
eltBridgePvstConfigTcProtectionInterval The time taken by the switch to process the maximum of TC BPDUs.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.9
eltBridgePvstConfigTcProtectionThresholdValue The maximum number of MAC entry flushes that the device can perform within set interval.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.10
eltBridgePvstConfigLoopGuardDefault Indicates status of loopguard feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.1.1.11

A table that contains port specific
configuration for each PVST instance.

eltBridgePvstPortConfigEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1

An entry that contains port specific
configuration of the certain PVST instance.

Indexes

eltBridgePvstVlanIndex eltBridgePvstPortIndex

Column	Syntax	OID
eltBridgePvstPortIndex The index of port that belogns to specific VLAN.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.1
eltBridgePvstPortConfigEnable Indicates the status of PVST instance on the specific port.	EltBridgePvstEnableTyper/w Type Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.2
eltBridgePvstPortConfigPathCost The contribution of this port in the configured VLAN to the path cost of paths towards the PVST root which include this port.	Integer32 Constraints: range: 1-200000000	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.3
eltBridgePvstPortConfigAdminPathCost Field for manual port cost configuration.	Integer32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.4
eltBridgePvstPortConfigPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.5
eltBridgePvstPortConfigAutoEdgePort If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.6
eltBridgePvstPortConfigAdminEdgePort The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.7
eltBridgePvstPortConfigGuardMode Indicates the mode of loop guard feature on this instance's port.	EltBridgeStpGuardModeTyper/w Type Values: 1 root 2 loop 3 none 4 default	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.8
eltBridgePvstPortConfigRestrictedTcn Configure filtering of Spanning Tree BPDUs with TC flag set.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.2.1.9

A table that contains status
for each PVST instance.

eltBridgePvstStatusEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1

An entry that contains status
of the certain PVST instance.

Indexes

eltBridgePvstVlanIndex

Column	Syntax	OID
eltBridgePvstStatusDesignatedRoot The unique Bridge Identifier of the Root Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.1
eltBridgePvstStatusRootFwdDelay This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the Root Bridge VLAN stays in ea…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.2
eltBridgePvstStatusRootHelloTime The amount of time between the transmission of Configuration PDUs by this node on VLAN's ports when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual valu…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.3
eltBridgePvstStatusRootMaxAge The maximum age of PVST information learned from the network on any VLAN's port before it is discarded, in units of hundredths of a second. This is the actual value that Root Bridge VLAN is currently using.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.4
eltBridgePvstStatusRootPriority The value of the writable portion of the Root Bridge ID, i.e., the first two octets of the (8 octet long) Root Bridge ID ORed (logical addition) with Root VLAN ID. The other (last) 6 octets of the Root Bridge ID are giv…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.5
eltBridgePvstStatusRootPort The port number of the port which offers the lowest cost path from this VLAN-instance to the root VLAN instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.6
eltBridgePvstStatusRootCost The cost of the path to the root as seen from this bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.7
eltBridgePvstStatusNumOfTcBpduHandled The number of topology change BPDU handled by the current instance.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.1.23.1.401.0.6.3.1.8

A table that contains port specific
status for each PVST instance.

eltBridgePvstPortStatusEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1

An entry that contains port specific
status of the certain PVST instance.

Indexes

eltBridgePvstVlanIndex eltBridgePvstPortIndex

Column	Syntax	OID
eltBridgePvstPortStatusPortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will …	EltBridgeStpPortStateType Type Values: 1 disabled 2 blocking 3 listening 4 learning 5 forwarding 6 broken	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.1
eltBridgePvstPortStatusPortRole The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will p…	EltBridgeStpPortRoleType Type Values: 1 unknown 2 disabled 3 alternate 4 backup 5 root 6 designated 7 master	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.2
eltBridgePvstPortStatusDesigRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.3
eltBridgePvstPortStatusDesigCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.4
eltBridgePvstPortStatusDesigBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.5
eltBridgePvstPortStatusDesigPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.6
eltBridgePvstPortStatusOperEdgePort The operational value of the Edge Port parameter. The object is initialized to the value of eltBridgePvstPortConfigAdminEdgePort and is set FALSE on reception of a BPDU.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.7
eltBridgePvstPortStatusInconsistencyState Guard mode of VLAN's port.	EltBridgeStpInconsistencyStateType Type Values: 1 none 2 loop 3 root	.1.3.6.1.4.1.35265.1.23.1.401.0.6.4.1.8

A table that contains real operational and administrative
statuses for each PVST instance that was
created in the system.

eltBridgePvstAuxStatusEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.6.5.1

An entry that contains real operational and administrative
statuses for each PVST instance that was
created in the system.

Indexes

eltBridgePvstVlanIndex eltBridgePvstPortIndex

Column	Syntax	OID
eltBridgePvstAuxOperStatus Indicates the status of PVST instance on the specific port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.5.1.1
eltBridgePvstAuxAdminStatus Indicates the administrative status of PVST instance on the specific port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.1.23.1.401.0.6.5.1.2

This table contains port index, vlan
number, Mac address related to this port
and status of this Mac address.

eltdot1qTpFdbPortEntry row .1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1

An entry contains port index, vlan
number, Mac address related to this port
and status of this Mac address.

Indexes

eltdot1qTpFdbPort eltdot1qTpFdbPortFdbId eltdot1qTpFdbPortAddress

Column	Syntax	OID
eltdot1qTpFdbPort Port index	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.1
eltdot1qTpFdbPortFdbId The identity of Filtering Database.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.2
eltdot1qTpFdbPortAddress Mac address related to this port		.1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.3
eltdot1qTpFdbPortStatus The status of this Mac address.	Enumeration Enumerated Values: 1 other 2 invalid 3 learned 4 self 5 mgmt	.1.3.6.1.4.1.35265.1.23.1.401.0.7.1.1.4