ELTEX-BGP-MIB Table View

Each entry in this table represents a single instance of
BGP Router process. Only some fields in an entry can be 
changed while the admin status is up.
          
The current implementation allows only a single process of
BGP is configured on the router. The single BGP process
could be created only with process ID 1.

eltexBgpProcessEntry row .1.3.6.1.4.1.35265.45.1.1.1.1

Each entry represents a BGP Router entity.

Indexes

eltexBgpProcessId

Column	Syntax	OID
eltexBgpProcessId Identifies a BGP Router entity.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.1.1.1.1
eltexBgpProcessRowStatus The row status for this BGP Process Table entry, used to create and destroy table entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.45.1.1.1.1.2
eltexBgpProcessAdminStatus The administrative status of this BGP Process entity, used to activate and deactivate the protocol.	EltexBgpAdminStatusr/w Type Values: 1 adminStatusUp 2 adminStatusDown	.1.3.6.1.4.1.35265.45.1.1.1.1.3
eltexBgpProcessOperStatus The current operational status of this BGP Process entity.	EltexBgpOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed	.1.3.6.1.4.1.35265.45.1.1.1.1.4
eltexBgpProcessLocalAs The local autonomous system number. For a router not in a confederation, it is equivalent to the Base Scalar bgpM2LocalAs. For a router in a confederation, it is equivalent to the Base Scalar bgpM2Confed…	EltexBgpAutonomousSystemNumberr/w	.1.3.6.1.4.1.35265.45.1.1.1.1.5
eltexBgpProcessLocalIdentifier The BGP Identifier of the local system. This is a generic identifier and not necessarily an IP address. This field can only be changed when the Admin Status is down. It is equivalent to the Base Scalar bgpM2LocalIdenti…	EltexBgpIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.1.1.1.6
eltexBgpProcessOperLocalIdentifier The BGP Identifier of the local system that is used in the present moment. It could be selected by election algorithm or configured by user.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.1.1.1.7
eltexBgpProcessTableVersion The table version number of the Loc-RIB. Initialized to 1 when BGP starts or restarts, and is incremented every time the Loc-RIB is recalculated.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.35265.45.1.1.1.1.8
eltexBgpProcessASNotation The choice between asplain and asdot notation AS numbers.	EltexBgpASNotationr/w Type Values: 1 asplainASNumber 2 asdotASnumber	.1.3.6.1.4.1.35265.45.1.1.1.1.9
eltexBgpProcessClusterIdentifier The configured Cluster-ID of the local router. A value of 0.0.0.0 indicates the absence of this value. This field can only be changed when the Admin Status is down. The BGP router will act as a route reflector if any p…	EltexBgpIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.1.1.1.10
eltexBgpProcessOperClusterIdentifier The Cluster-ID that is used in the present moment.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.1.1.1.11
eltexBgpProcessInterClientReflEnabled Routes will not be reflected between two peers that are configured to be route reflector clients in the eltexBgpPeerReflectorClient field if this field takes the value FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.1.1.1.12
eltexBgpProcessPathMtuDiscovery Enable path MTU discovery on all neighbors	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.1.1.1.13

Table of per-<AFI, SAFI> configuration information.

eltexBgpProcessAddrFamilyEntry row .1.3.6.1.4.1.35265.45.1.1.2.1

Entry containing information about support for an
<AFI, SAFI>.

Indexes

eltexBgpProcessId eltexBgpProcessAddrFamilyAfi eltexBgpProcessAddrFamilySafi

Column	Syntax	OID
eltexBgpProcessAddrFamilyAfi The AFI index into the <AFI, SAFI> table.	EltexBgpAfi Type Values: 0 other 1 ipv4 2 ipv6 25 l2vpn	.1.3.6.1.4.1.35265.45.1.1.2.1.2
eltexBgpProcessAddrFamilySafi The SAFI index into the <AFI, SAFI> table.	EltexBgpSafi Type Values: 0 none 1 unicast 2 multicast 3 both 4 labeled 65 vpls 70 evpn 128 mplsBgpVpn 241 private	.1.3.6.1.4.1.35265.45.1.1.2.1.3
eltexBgpProcessAddrFamilyRowStatus The row status for this <AFI, SAFI> entry, used to create and destroy table entries. This field can only be set while Process is admin down.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.45.1.1.2.1.4

BGP peer configuration table.
          
This table allows a user to configure individual BGP peers.
          
This table is a configuration table - all status, statistics
and control fields are located in the BGP peer status table
(eltexBgpPeerStatusTable).
          
This table does not contain entries for dynamic peers.

eltexBgpPeerEntry row .1.3.6.1.4.1.35265.45.1.2.1.1.1

Entry containing information about the connection with
a BGP peer.

Indexes

eltexBgpProcessId eltexBgpPeerRemoteAddrType eltexBgpPeerRemoteAddr

Column	Syntax	OID
eltexBgpPeerRemoteAddrType The address family of the remote address for the peering session.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.2.1.1.1.1
eltexBgpPeerRemoteAddr The remote address for the peering session. This is the address of the BGP peer. It must be specified so the address length must be non-zero.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.2.1.1.1.2
eltexBgpPeerRowStatus The row status for this BGP peer table entry, used to create and destroy table entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.45.1.2.1.1.1.3
eltexBgpPeerAdminStatus The desired state of the BGP connection. This parameter can be used to restart BGP peer connections. Care should be used in providing write access to this object without adequate authentication.	EltexBgpAdminStatusr/w Type Values: 1 adminStatusUp 2 adminStatusDown	.1.3.6.1.4.1.35265.45.1.2.1.1.1.4
eltexBgpPeerOperStatus The current operational status of this peer. This usually reflects the desired AdminStatus, but can contain transitional values and failures.	EltexBgpOperStatus Type Values: 1 operStatusUp 2 operStatusDown 3 operStatusGoingUp 4 operStatusGoingDown 5 operStatusActFailed	.1.3.6.1.4.1.35265.45.1.2.1.1.1.5
eltexBgpPeerRemoteAs The remote autonomous system number. This field can be changed at any time. However, if the field is changed while the peer is admin_status UP, the change will only take effect after the peer has been cy…	EltexBgpAutonomousSystemNumberr/w	.1.3.6.1.4.1.35265.45.1.2.1.1.1.6
eltexBgpPeerSourceInterface The interface index for the interface from which the source address for session is chosen. If non-zero, BGP will look for the first address on this interface with a type matching eltexBgpPeerRemoteAddrType, and use tha…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.35265.45.1.2.1.1.1.7
eltexBgpPeerNxtHopSlf When eltexBgpPeerNxtHopSlf is 'true', routes will be advertised to the peer with NEXT_HOP attribute set to BGP router local address.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.1.1.8
eltexBgpPeerConfigMaxPrfx This object is used to limit the number of prefixes that can be accepted from this peer. Setting eltexBgpPeerConfigMaxPrfx to a non-zero value sets the maximum number of prefixes that can be accepted fro…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.1.1.9
eltexBgpPeerConfigDropWarn This object is used to determine whether the session is dropped or a warning is generated when the maximum number of prefixes set is exceeded. Setting eltexBgpPeerConfigDropWarn to 'drop' will cause the …	EltexBgpConfigDropOrWarnr/w Type Values: 1 drop 2 warn	.1.3.6.1.4.1.35265.45.1.2.1.1.1.10
eltexBgpPeerMaxPrfxHold The time interval in seconds between when this BGP session is turn down due to the number of prefixes received from this peer exceeding the maximum in eltexBgpPeerConfigMaxPrfx and when BGP attempts to reestablish the s…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.1.1.11
eltexBgpPeerConfigThreshold A percentage of the limit set by eltexBgpPeerConfigMaxPrfx. When the number of prefixes received from this peer reaches this threshold, BGP issues a warning. This field is not used if eltexBgpPeerConfigMa…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.1.1.12
eltexBgpPeerConnectRetryInterval Time interval for the ConnectRetry timer. The suggested value for this timer is 120 seconds. This field can be changed at any time. However, if the field is changed while the peer is admin_status UP, th…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.35265.45.1.2.1.1.1.13
eltexBgpPeerHoldTimeConfigd Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an O…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.1.1.1.14
eltexBgpPeerKeepAliveConfigd Time interval in seconds for the KeepAlive configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in eltexBgpPeerHo…	Unsigned32r/w Constraints: range: 0-21845	.1.3.6.1.4.1.35265.45.1.2.1.1.1.15
eltexBgpPeerMinRouteAdvertiseInterval Time interval in seconds for the MinRouteAdvertisementInterval timer. This determines the minimum time between a BGP UPDATE to a peer advertising or withdrawing a route and a subsequent BGP UPDATE to the peer advertisi…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.1.1.1.16
eltexBgpPeerMinASOriginationInterval Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes to a route within the advertising BGP speaker's own autonomou…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.1.1.1.17
eltexBgpPeerMinRouteWithdrawInterval Time interval in seconds for the MinRouteWithdrawInterval timer. This is the interval which is enforced between advertisement and subsequent withdrawal of a route. The default value for this timer is 30 …	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.1.1.1.18
eltexBgpPeerConfigOpenDelay The delay to enforce in between a TCP connection with this peer becoming established and a BGP Open message being sent. If this delay is zero, then no delay will be injected, and a BGP Open message will be sent as soon…	Unsigned32r/w Constraints: range: 0-240	.1.3.6.1.4.1.35265.45.1.2.1.1.1.19
eltexBgpPeerConfigIdleHold The time to hold this peer in Idle state after a BGP session has progressed beyond Idle state initially and then returned to it. No new connections will be initiated or accepted until the peer comes out of Idle state. …	Unsigned32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.35265.45.1.2.1.1.1.20
eltexBgpPeerDistListPlIn The Prefix List name identifying the Prefix List to use to filter routes received from the peer.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.1.1.1.21
eltexBgpPeerDistListPlOut The Prefix List name identifying the Prefix List to use to filter routes advertised to the peer.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.1.1.1.22
eltexBgpPeerReflectorClient This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient(0) indicates that this peer is not a reflector client. A value of client(1) indicates that this peer is a …	EltexBgpPeerReflectorClientTyper/w Type Values: 0 nonClient 1 client 2 meshedClient	.1.3.6.1.4.1.35265.45.1.2.1.1.1.23
eltexBgpPeerSoftResetWithStoredInfo This option causes all routes learned from a peer to be stored so that the ARI can be recalculated (for example, due to a change in import policy) without performing a route refresh or restarting the peer session. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.1.1.24
eltexBgpPeerConfigPeerGroup This is the index of the peer group. If a peer is not in a peer group then its eltexBgpPeerConfigPeerGroup value is 0	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.1.1.1.25
eltexBgpPeerPathMtuDiscovery Enable path MTU discovery. If the feature is enabled, all packets are sent with the 'Do not fragment' flag to this peer. The maximum segment size for TCP connection with this peer will be adjusted to the next-hop MTU va…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.1.1.26
eltexBgpPeerBfdDesired Indicates whether Bidirectional Forwarding Detection (BFD) is desired for this peer. This field can be changed at any time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.1.1.27

BGP Peer <AFI, SAFI> configuration table.
          
This table allows a user to configure peer characteristics
on a per AFI/SAFI basis.
          
This table is a configuration table - all status, statistics
and control fields are deprecated in favor of the BGP peer
AFI/SAFI status table (etlexBgpPeerAddrFamilyStatusTable).
          
This table does not contain entries for dynamic peers.

eltexBgpPeerAddrFamilyEntry row .1.3.6.1.4.1.35265.45.1.2.1.2.1

Peer <AFI, SAFI> configuration table entry.

Indexes

eltexBgpProcessId eltexBgpPeerRemoteAddrType eltexBgpPeerRemoteAddr eltexBgpPeerAddrFamilyAfi eltexBgpPeerAddrFamilySafi

Column	Syntax	OID
eltexBgpPeerAddrFamilyAfi The AFI index into the peer <AFI, SAFI> table.	EltexBgpAfi Type Values: 0 other 1 ipv4 2 ipv6 25 l2vpn	.1.3.6.1.4.1.35265.45.1.2.1.2.1.1
eltexBgpPeerAddrFamilySafi The SAFI index into the peer <AFI, SAFI> table.	EltexBgpSafi Type Values: 0 none 1 unicast 2 multicast 3 both 4 labeled 65 vpls 70 evpn 128 mplsBgpVpn 241 private	.1.3.6.1.4.1.35265.45.1.2.1.2.1.2
eltexBgpPeerAddrFamilyDisable When eltexBgpPeerAddrFamilyDisable is 'true', BGP will not advertise Multiprotocol support to the peer for this address family. When eltexBgpPeerAddrFamilyDisable is 'false', BGP will advertise Multiproto…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.2.1.3
eltexBgpPeerAddrFamilyNxtHopSlf Gives finer control of the next-hop-self configuration provided by eltexBgpPeerNxtHopSlf. When eltexBgpPeerNxtHopSlf is 'false', BGP does not perform next-hop-self for any address family. W…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.2.1.4
eltexBgpPeerAddrFamilyConfigMaxPrfx Gives finer control of the maximum prefix configuration provided by eltexBgpPeerConfigMaxPrfx. To configure address family specific values for the maximum number of prefixes that can be accepted from the …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.2.1.5
eltexBgpPeerAddrFamilyConfigDropWarn Gives finer control of the configuration provided by eltexBgpPeerConfigDropWarn, which determines the behavior when the maximum prefix limit is reached. To configure whether the session is dropped or a wa…	EltexBgpConfigDropOrWarnr/w Type Values: 1 drop 2 warn	.1.3.6.1.4.1.35265.45.1.2.1.2.1.6
eltexBgpPeerAddrFamilyMaxPrfxHold Gives finer control of the configuration provided by eltexBgpPeerMaxPrfxHold, which determines the time interval in seconds between when this BGP session is torn down due to the number of prefixes received from this pee…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.2.1.7
eltexBgpPeerAddrFamilyConfigThreshold Gives finer control of the threshold configuration provided by eltexBgpPeerConfigThreshold. When the number of prefixes received from this peer for this address family reaches this threshold, BGP issues a warning. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.2.1.8
eltexBgpPeerAddrFamilyMinRteAdvertInt Time interval in seconds for the MinRouteAdvertisementInterval timer. This determines the minimum time between a BGP UPDATE to a peer advertising or withdrawing a route and a subsequent BGP UPDATE to the peer advertisi…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.1.2.1.9
eltexBgpPeerAddrFamilyMinASOrigInt Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes to a route within the advertising BGP speaker's own autonomou…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.35265.45.1.2.1.2.1.10
eltexBgpPeerAddrFamilyMinRteWithdrawInt Time interval in seconds for the MinRouteWithdrawInterval timer. This is the interval which is enforced between advertisement and subsequent withdrawal of a route. This field has no effect if eltexBgpPe…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.1.2.1.11
eltexBgpPeerAddrFamilyReflectorClient Gives finer control of the configuration provided by eltexBgpPeerReflectorClient. This value indicates whether the given peer is a reflector client of this router for this AFI/SAFI, or not. A value of no…	EltexBgpPeerReflectorClientTyper/w Type Values: 0 nonClient 1 client 2 meshedClient	.1.3.6.1.4.1.35265.45.1.2.1.2.1.12
eltexBgpPeerAddrFamilyRouteMapIn The name of the Route Map to use for route imports from the peer for this AFI/SAFI.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.1.2.1.13
eltexBgpPeerAddrFamilyRouteMapOut The name of the Route Map to use for route exports to the peer for this AFI/SAFI.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.1.2.1.14

BGP peer status table.
          
This table reports BGP peer status and statistics.  It also
allows a user to control BGP peer statistics and peer
sessions.
          
This table does not contain any BGP peer configuration -
the eltexBgpPeerTable MIB is the BGP peer configuration MIB.
          
This table contains entries for both configured and dynamic
peers.
          
For configured peers the corresponding rows in the
eltexBgpPeerTable MIB and eltexBgpPeerStatusTable MIB have
identical index fields.
          
The lifetime of a BGP peer status entry depends on whether
the BGP peer is configured or dynamic.
-  The entry for a configured peer is created and destroyed
when the corresponding entry in the BGP peer
configuration table (eltexBgpPeerTable) is created and
destroyed.
-  The entry for a dynamic peer is created when the BGP
peering session is established.  It is destroyed when
the BGP session has terminated.

eltexBgpPeerStatusEntry row .1.3.6.1.4.1.35265.45.1.2.1.3.1

Entry containing information about the status of a BGP peer.

Indexes

eltexBgpProcessId eltexBgpPeerRemoteAddrType eltexBgpPeerRemoteAddr

Column	Syntax	OID
eltexBgpPeerStatusIdentifier The BGP Identifier of this entry's BGP peer. This entry is zero unless the eltexBgpPeerStatusState is in the openconfirm or the established state.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.2.1.3.1.1
eltexBgpPeerStatusState The BGP peer's FSM state.	EltexBgpPeerStates Type Values: 0 none 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established	.1.3.6.1.4.1.35265.45.1.2.1.3.1.2
eltexBgpPeerStatusDynamicPeer Whether the peer is dynamic (true) or individually configured (false).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.3
eltexBgpPeerStatusRemoteAs The remote autonomous system number in use on the session. For configured peers not yet active, this is the configured value.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.2.1.3.1.4
eltexBgpPeerStatusPeerIndex The peer index. The peer index is a unique index for the peer entry in the eltexBgpPeerStatusTable. It is used to provide an index value for other tables whose data is logically per-peer.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.5
eltexBgpPeerStatusCapsSupport Whether or not this peer accepted our local capabilities optional parameter sent on the OPEN message. This field will not be relevant until the peer has reached open_confirm state. Note that this field indicates suppo…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.6
eltexBgpPeerStatusLastError The last error code and subcode sent or received on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte co…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.35265.45.1.2.1.3.1.7
eltexBgpPeerStatusLastErrorDataLen The length of the last error data. If this is zero no error data was provided or generated.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.8
eltexBgpPeerStatusLastErrorData The last error code's data seen by this peer on this connection.	OctetString Constraints: range: 128-128	.1.3.6.1.4.1.35265.45.1.2.1.3.1.9
eltexBgpPeerStatusFsmEstablishedTime This timer indicates how long in seconds this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is boote…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.10
eltexBgpPeerStatusInUpdatesElpsTime Elapsed time in seconds since the last BGP Update message was received from the peer.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.11
eltexBgpPeerStatusHoldTime Time interval in seconds for the Hold Timer established with the peer. The Hold Timer interval is calculated by this BGP speaker by using the smaller of the configured eltexBgpPeerHoldTimeConfigd value an…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.45.1.2.1.3.1.12
eltexBgpPeerStatusKeepAlive Time interval in seconds for the KeepAlive Timer established with the peer. The KeepAlive Timer interval is calculated by this BGP speaker such that, when compared with eltexBgpPeerStatusHoldTime, it has …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.45.1.2.1.3.1.13
eltexBgpPeerStatusInOpens The number of BGP OPEN messages received on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.14
eltexBgpPeerStatusOutOpens The number of BGP OPEN messages transmitted on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.15
eltexBgpPeerStatusInNotifications The number of BGP NOTIFICATION messages received on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.16
eltexBgpPeerStatusOutNotifications The number of BGP NOTIFICATION messages transmitted on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.17
eltexBgpPeerStatusInUpdates The number of BGP UPDATE messages received on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.18
eltexBgpPeerStatusOutUpdates The number of BGP UPDATE messages transmitted on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.19
eltexBgpPeerStatusInKeepalives The number of BGP KEEPALIVE messages received on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.20
eltexBgpPeerStatusOutKeepalives The number of BGP KEEPALIVE messages transmitted on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.21
eltexBgpPeerStatusInRefreshes The number of BGP ROUTE REFRESH messages received on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.22
eltexBgpPeerStatusOutRefreshes The number of BGP ROUTE REFRESH messages transmitted on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.23
eltexBgpPeerStatusInTotalMessages The total number of messages received from the remote peer on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.24
eltexBgpPeerStatusOutTotalMessages The total number of messages transmitted to the remote peer on this connection.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.25
eltexBgpPeerStatusFsmEstTransitions The total number of times the BGP FSM transitioned into the established state for this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.26
eltexBgpPeerStatusConnectRetryCount The current connect retry count of this peer. This is incremented each time the peer session flaps, and is used to determine the time to wait before retrying the session. Note this is only …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.27
eltexBgpPeerStatusClearCnts Set this field to 'true' to clear the counters associated with this peer. Reading the value of this field has no meaning. The field is not returned on a MIB Get.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.28
eltexBgpPeerStatusRtRefresh Set this field to 'true' to trigger sending a route refresh request for this peer. Setting this field will only have an effect if a BGP session to the peer is active. Peers that do not support route refr…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.29
eltexBgpPeerStatusLastErrorRcvd The last error code and subcode received from the peer on this connection. If no error has been received from the peer, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contain…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.35265.45.1.2.1.3.1.30
eltexBgpPeerStatusLastErrorRcvdTime The value of sysUpTime when the last error was received from the peer on this connection. If no error has been received from the peer, this field is zero.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.35265.45.1.2.1.3.1.31
eltexBgpPeerStatusLastErrorSent The last error code and subcode sent to the peer on this connection. If no error has been sent to the peer, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error c…	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.35265.45.1.2.1.3.1.32
eltexBgpPeerStatusLastErrorSentTime The value of sysUpTime when the last error was sent to the peer on this connection. If no error has been sent to the peer, this field is zero.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.35265.45.1.2.1.3.1.33
eltexBgpPeerStatusLastState The BGP peer's previous FSM state.	EltexBgpPeerStates Type Values: 0 none 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established	.1.3.6.1.4.1.35265.45.1.2.1.3.1.34
eltexBgpPeerStatusLastEvent The last input to be made to the BGP peer's FSM.	EltexBgpPeerEvents Type Values: 0 noEvent 1 start 2 stop 3 transportOpen 4 transportClosed 5 transportOpenFailed 6 transportFatalError 7 connectRetryTimer 8 holdTimer 9 keepaliverTimer 10 recvOpen 11 recvKeepAlive 12 recvUpdate 13 recvNotification 14 connParmsUpdate	.1.3.6.1.4.1.35265.45.1.2.1.3.1.35
eltexBgpPeerStatusCapsSent The capabilities announced to the peer on the most recent Open message sent to the peer. This field is set to zero before the first Open message is sent to the peer, and is unchanged if the session comes down.	EltexBgpCapabilities Type Values: 0 mpIpv4Unicast 1 mpIpv4Multicast 2 mpIpv4Vpn 3 mpIpv4Label 4 mpIpv6Unicast 5 mpIpv6Multicast 6 mpIpv6Vpn 7 mpIpv6Label 8 routeRefresh 9 gracefulRestart 10 routeRefreshCisco 11 outboundRouteFilter 12 outboundRouteFilterCisco 13 fourOctetAs 14 mpL2vpnVpls 15 addPath 16 mpL2vpnEvpn 17 mpIpv4Private 18 enhancedRouteRefresh	.1.3.6.1.4.1.35265.45.1.2.1.3.1.36
eltexBgpPeerStatusCapsRcvd The capabilities received on the most recent Open message received from the peer. This field is set to zero before the first Open message is received from the peer, and is unchanged if the session comes down. …	EltexBgpCapabilities Type Values: 0 mpIpv4Unicast 1 mpIpv4Multicast 2 mpIpv4Vpn 3 mpIpv4Label 4 mpIpv6Unicast 5 mpIpv6Multicast 6 mpIpv6Vpn 7 mpIpv6Label 8 routeRefresh 9 gracefulRestart 10 routeRefreshCisco 11 outboundRouteFilter 12 outboundRouteFilterCisco 13 fourOctetAs 14 mpL2vpnVpls 15 addPath 16 mpL2vpnEvpn 17 mpIpv4Private 18 enhancedRouteRefresh	.1.3.6.1.4.1.35265.45.1.2.1.3.1.37
eltexBgpPeerStatusCapsNegotiated The capabilities negotiated for the session with the peer. This field is set to zero before Open messages have been exchanged with the peer, and is unchanged if the session comes down.	EltexBgpCapabilities Type Values: 0 mpIpv4Unicast 1 mpIpv4Multicast 2 mpIpv4Vpn 3 mpIpv4Label 4 mpIpv6Unicast 5 mpIpv6Multicast 6 mpIpv6Vpn 7 mpIpv6Label 8 routeRefresh 9 gracefulRestart 10 routeRefreshCisco 11 outboundRouteFilter 12 outboundRouteFilterCisco 13 fourOctetAs 14 mpL2vpnVpls 15 addPath 16 mpL2vpnEvpn 17 mpIpv4Private 18 enhancedRouteRefresh	.1.3.6.1.4.1.35265.45.1.2.1.3.1.38
eltexBgpPeerStatusRcvdMsgElpsTime The elapsed time in hundredths of a second since anything was received from this peer. If nothing has been received from this peer, this field is set to zero. If the session comes down this value continues to increase.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.39
eltexBgpPeerStatusIdleHoldRemTime For a peer in 'idle' state, the time remaining in hundredths of a second until BGP will try to reactivate the connection. If the peer is not in 'idle' state, this is set to zero.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.40
eltexBgpPeerStatusRouteRefrSent The number of Route Refresh messages sent to the peer. If the session comes down this value is unchanged, and will continue to increment if the session is reestablished. However, for dynami…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.41
eltexBgpPeerStatusRouteRefrRcvd The number of Route Refresh messages received from the peer. If the session comes down this value is unchanged, and will continue to increment if the session is reestablished. However, for …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.42
eltexBgpPeerStatusSelLocalAddrType The address family of the local address used by the transport connection for the peering session. A value of none implies that there is currently no connection to this peer.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.2.1.3.1.43
eltexBgpPeerStatusSelLocalAddr The local address used by the transport connection for the peering session.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.2.1.3.1.44
eltexBgpPeerStatusSelLocalPort The local port used by the transport connection for the peering session. A value of zero implies that there is currently no connection to this peer.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.35265.45.1.2.1.3.1.45
eltexBgpPeerStatusSelRemotePort The remote port used by the transport connection for the peering session. A value of zero implies that there is currently no connection to this peer.	INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.35265.45.1.2.1.3.1.46
eltexBgpPeerStatusSelLocalAs The local AS number used on this session. If the eltexBgpPeerStatusState is not 'established', then this field is zero.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.2.1.3.1.47
eltexBgpPeerStatusSelRemoteAs The remote AS number used on this session. If the eltexBgpPeerStatusState is not 'established', then this field is zero.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.2.1.3.1.48
eltexBgpPeerStatusInPrfxes The total number of prefixes received from this peer.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.49
eltexBgpPeerStatusOutPrfxes The number of prefixes that are installed in all of this peer's Adj-RIBs-Out.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.50
eltexBgpPeerStatusOutPrfxesAdvertised The total number of prefixes advertised to this peer.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.51
eltexBgpPeerStatusConfigState This field reports the state of the peer configuration. The peer configuration may be in one of the following states. - Up to date. That is, all configuration set by MIBs for this peer has been applied …	EltexBgpPeerConfigStates Type Values: 1 stateUpToDate 2 stateOutOfDateAdminDown 3 stateOutOfDateRowInactive	.1.3.6.1.4.1.35265.45.1.2.1.3.1.52
eltexBgpPeerStatusConnectRetryInt The currently active time interval for the ConnectRetry timer. This value may be different from the current peer MIB value (eltexBgpPeerConnectRetryInterval) if the peer takes its value from a peer group …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.53
eltexBgpPeerStatusConfigPassive The current active passive flag. If TRUE, then no outbound connections will be initiated, and only incoming connections will be accepted. If FALSE, then outbound connections will be attempted to this peer, and incomin…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.54
eltexBgpPeerStatusConfigOpenDelay The currently active delay to enforce in between a TCP connection with this peer becoming established and a BGP Open message being sent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.55
eltexBgpPeerStatusConfigIdleHold The currently active time to hold this peer in Idle state after a BGP session has progressed beyond Idle state initially and then returned to it.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.56
eltexBgpPeerStatusTtl The currently active Time To Live used by the connection on this peer.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.45.1.2.1.3.1.57
eltexBgpPeerStatusHoldTimeConfigd The currently active time interval in seconds for the Hold Time configured for this BGP speaker with this peer.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.58
eltexBgpPeerStatusKeepAliveConfigd The currently active time interval in seconds for the KeepAlive configured for this BGP speaker with this peer.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.59
eltexBgpPeerStatusResendAllRoutes Set this to 'true' to trigger BGP to re-send all routes to the peer. If the peer supports enhanced route refresh, then the routes will be sent as an unsolicited enhanced route refresh. Setting this field…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.60
eltexBgpPeerStatusOutUpdateElpsTime Elapsed time in seconds since the last BGP UPDATE message was sent to this peer. Each time eltexBgpPeerStatusOutUpdates is incremented, the value of this object is set to zero (0).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.61
eltexBgpPeerStatusOutPrfxesDenied This is the number of prefixes in the Loc-RIB that have have failed export policy checks and so have not been installed in the Adj-RIB-Out for this peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.62
eltexBgpPeerStatusOutPrfxesImpWdr The total number of routes for which an implicit withdraw has been sent to this peer. A route is implicitly withdrawn if a replacement route with the same NLRI is advertised to the peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.63
eltexBgpPeerStatusOutPrfxesExpWdr The total number of routes for which an explicit withdraw has been sent to this peer. A route is explicitly withdrawn if it is advertised in the WITHDRAWN ROUTES field in an UPDATE message sent to the peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.64
eltexBgpPeerStatusInPrfxesImpWdr The total number of routes that have been implicitly withdrawn by this peer. A route is implicitly withdrawn if a replacement route with the same NLRI is received from the peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.65
eltexBgpPeerStatusInPrfxesExpWdr The total number of routes that have been explicitly withdrawn by this peer. A route is explicitly withdrawn if it is advertised in the WITHDRAWN ROUTES field in an UPDATE message received from the peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.3.1.66
eltexBgpPeerStatusReceivedHoldTime The Hold Time value received in the OPEN message from this peer. A value of zero indicates that no Hold Time has been received from the peer.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.35265.45.1.2.1.3.1.67
eltexBgpPeerStatusDropSession Set this field to 'true' to drop the current session with the BGP peer. For a dynamic BGP peer this causes the peer status entry to disappear if the BGP session is not re-established within the graceful restart period.…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.3.1.68
eltexBgpPeerStatusCeaseErrorSubcode The error subcode to be sent in the Cease Notification messages triggered by setting eltexBgpPeerStatusDropSession to 'true'. If set to 'none' then DC-BGP chooses the subcode itself. This field does not …	EltexBgpCeaseErrorSubcoder/w Type Values: 0 none 2 adminShutdown 3 peerUnconfig 4 adminReset 6 configChange 8 noResource	.1.3.6.1.4.1.35265.45.1.2.1.3.1.69
eltexBgpPeerStatusBfdStatus BFD session state for this peer.	EltexBfdSessionStatus Type Values: 0 bfdSessNotRequired 1 bfdSessInitial 2 bfdSessActivating 3 bfdSessActive 4 bfdSessInactive 5 bfdSessAdminDown 6 bfdSessNoContact	.1.3.6.1.4.1.35265.45.1.2.1.3.1.70

BGP peer <AFI, SAFI> status table.
          
This table allows a user to control BGP peer AFI/SAFI
operations.
          
In future this table may also report BGP peer AFI/SAFI
status and statistics.
          
This table does not contain any BGP peer AFI/SAFI
configuration - the eltexBgpPeerAddrFamilyTable MIB is the BGP
peer AFI/SAFI configuration MIB.
          
This table contains entries for both configured and dynamic
peers.
          
Rows in this table cannot be created or destroyed manually.
A table entry for each supported address family is created
automatically when an entry in the eltexBgpPeerStatusTable is
created.  The entries are destroyed when the
eltexBgpPeerStatusTable entry is destroyed.

eltexBgpPeerAddrFamilyStatusEntry row .1.3.6.1.4.1.35265.45.1.2.1.4.1

Entry containing information about the status of a BGP peer
for a particular AFI/SAFI.

Indexes

eltexBgpProcessId eltexBgpPeerRemoteAddrType eltexBgpPeerRemoteAddr eltexBgpPeerAddrFamilyAfi eltexBgpPeerAddrFamilySafi

Column	Syntax	OID
eltexBgpPeerAddrFamilyStatusRtRefresh Set this to 'true' to trigger BGP to send a Route Refresh request to the peer for this AFI/SAFI. Setting this field will only have an effect if a BGP session to the peer is active. Peers that do not supp…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.4.1.1
eltexBgpPeerAddrFamilyStatusAddPathCapNeg The BGP additional path capability negotiated with this peer for this AFI/SAFI.	EltexBgpAddPathSrCap Type Values: 0 disable 1 receive 2 send 3 both 4 inherit 5 unknown	.1.3.6.1.4.1.35265.45.1.2.1.4.1.2
eltexBgpPeerAddrFamilyStatusReflectorClient The currently active value which indicates whether the given peer is a reflector client of this router for this AFI/SAFI, or not. This value may be different from the current peer AFI/SAFI MIB value (elte…	EltexBgpPeerReflectorClientType Type Values: 0 nonClient 1 client 2 meshedClient	.1.3.6.1.4.1.35265.45.1.2.1.4.1.3
eltexBgpPeerAddrFamilyStatusUpdateGroup The index of the update group that the peer is a member of for this AFI/SAFI. Zero if the peer is not a member of an update group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.1.4.1.4
eltexBgpPeerAddrFamilyStatusResendAllRoutes Set this to 'true' to trigger BGP to re-send all routes to the peer for this AFI/SAFI. If the peer supports enhanced route refresh, then this will be sent as an unsolicited enhanced route refresh. Settin…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.1.4.1.5

The table of peer groups.
          
A peer group is a set of peers that share a common peer
group configuration.
          
Using peer groups simplifies peer configuration.  Instead of
configuring many peers with the same set of configuration
values, you can configure a single peer group and then
assign peers to the peer group.
          
Each peer in a peer group has its eltexBgpPeerConfigPeerGroup value
set to the peer group index.  If a peer is  not in a peer group then
its eltexBgpPeerConfigPeerGroup value is 0.

eltexBgpPeerGroupEntry row .1.3.6.1.4.1.35265.45.1.2.2.1.1

Entry containing information about the connection with
a BGP peer.

Indexes

eltexBgpProcessId eltexBgpPeerGroupName

Column	Syntax	OID
eltexBgpPeerGroupName The name of this eltexBgpPeerGroupEntry. This is the index of the peer group.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.2.1.1.1
eltexBgpPeerGroupRowStatus The row status for this BGP peer group table entry, used to create and destroy table entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.45.1.2.2.1.1.2
eltexBgpPeerGroupRemoteAs The remote autonomous system number. For individual peers, this can be configured using eltexBgpPeerRemoteAs. This field can be changed at any time. However, if the field is changed while …	EltexBgpAutonomousSystemNumberr/w	.1.3.6.1.4.1.35265.45.1.2.2.1.1.3
eltexBgpPeerGroupSourceInterface The interface index for the interface from which the source address for session is chosen. If non-zero, BGP will look for the first address on this interface with a type matching eltexBgpPeerRemoteAddrType, and use tha…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.35265.45.1.2.2.1.1.4
eltexBgpPeerGroupNxtHopSlf When eltexBgpPeerGroupNxtHopSlf is 'true', routes will be advertised to the peer with NEXT_HOP attribute set to BGP router local address.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.2.1.1.5
eltexBgpPeerGroupConfigMaxPrfx This object is used to limit the number of prefixes that can be accepted from this peer. Setting eltexBgpPeerGroupConfigMaxPrfx to a non-zero value sets the maximum number of prefixes that can be accepte…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.2.1.1.6
eltexBgpPeerGroupConfigDropWarn This object is used to determine whether the session is dropped or a warning is generated when the maximum number of prefixes set is exceeded. Setting eltexBgpPeerGroupConfigDropWarn to 'drop' will cause…	EltexBgpConfigDropOrWarnr/w Type Values: 1 drop 2 warn	.1.3.6.1.4.1.35265.45.1.2.2.1.1.7
eltexBgpPeerGroupMaxPrfxHold The time interval in seconds between when this BGP session is turn down due to the number of prefixes received from this peer exceeding the maximum in eltexBgpPeerGroupConfigMaxPrfx and when BGP attempts to reestablish …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.2.1.1.8
eltexBgpPeerGroupConfigThreshold A percentage of the limit set by eltexBgpPeerGroupConfigMaxPrfx. When the number of prefixes received from this peer reaches this threshold, BGP issues a warning. This field is not used if eltexBgpPeerGro…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.2.2.1.1.9
eltexBgpPeerGroupConnectRetryInterval Time interval for the ConnectRetry timer. The suggested value for this timer is 120 seconds. This field can be changed at any time. However, if the field is changed while the peer is admin_status UP, th…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.35265.45.1.2.2.1.1.10
eltexBgpPeerGroupHoldTimeConfigd Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an O…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.2.1.1.11
eltexBgpPeerGroupKeepAliveConfigd Time interval in seconds for the KeepAlive configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in eltexBgpPeerGr…	Unsigned32r/w Constraints: range: 0-21845	.1.3.6.1.4.1.35265.45.1.2.2.1.1.12
eltexBgpPeerGroupMinRouteAdvertiseInterval Time interval in seconds for the MinRouteAdvertisementInterval timer. This determines the minimum time between a BGP UPDATE to a peer advertising or withdrawing a route and a subsequent BGP UPDATE to the peer advertisi…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.2.1.1.13
eltexBgpPeerGroupMinASOriginationInterval Time interval in seconds for determining the minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes to a route within the advertising BGP speaker's own autonomou…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.2.1.1.14
eltexBgpPeerGroupMinRouteWithdrawInterval Time interval in seconds for the MinRouteWithdrawInterval timer. This is the interval which is enforced between advertisement and subsequent withdrawal of a route. The default value for this timer is 30 …	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.35265.45.1.2.2.1.1.15
eltexBgpPeerGroupConfigOpenDelay The delay to enforce in between a TCP connection with this peer becoming established and a BGP Open message being sent. If this delay is zero, then no delay will be injected, and a BGP Open message will be sent as soon…	Unsigned32r/w Constraints: range: 0-240	.1.3.6.1.4.1.35265.45.1.2.2.1.1.16
eltexBgpPeerGroupConfigIdleHold The time to hold this peer in Idle state after a BGP session has progressed beyond Idle state initially and then returned to it. No new connections will be initiated or accepted until the peer comes out of Idle state. …	Unsigned32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.35265.45.1.2.2.1.1.17
eltexBgpPeerGroupDistListPlIn The Prefix List name identifying the Prefix List to use to filter routes received from the peer.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.2.1.1.18
eltexBgpPeerGroupDistListPlOut The Prefix List name identifying the Prefix List to use to filter routes advertised to the peer.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.35265.45.1.2.2.1.1.19
eltexBgpPeerGroupReflectorClient This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient(0) indicates that this peer is not a reflector client. A value of client(1) indicates that this peer is a …	EltexBgpPeerReflectorClientTyper/w Type Values: 0 nonClient 1 client 2 meshedClient	.1.3.6.1.4.1.35265.45.1.2.2.1.1.20
eltexBgpPeerGroupSoftResetWithStoredInfo This option causes all routes learned from a peer to be stored so that the ARI can be recalculated (for example, due to a change in import policy) without performing a route refresh or restarting the peer session. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.2.1.1.21
eltexBgpPeerGroupBfdDesired Indicates whether Bidirectional Forwarding Detection (BFD) is desired for peers in this peer group. This field can be changed at any time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.2.2.1.1.22

This table contains information about paths to destination
networks received from all BGP4 peers.
          
This table reports routes and path attributes after import
policy has been applied.  Only routes accepted by import
policy are reported.

eltexBgpLocRibEntry row .1.3.6.1.4.1.35265.45.1.3.1.1

Information about a path to a network.

Indexes

eltexBgpProcessId eltexBgpLocRibAfi eltexBgpLocRibSafi eltexBgpLocRibPrfxType eltexBgpLocRibPrfx eltexBgpLocRibPrfxLen eltexBgpLocRibPeerOrRib eltexBgpLocRibPeerRibIndex eltexBgpLocRibPathId

Column	Syntax	OID
eltexBgpLocRibAfi The address family of the prefix for this Loc-RIB route.	EltexBgpAfi Type Values: 0 other 1 ipv4 2 ipv6 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.1.1.1
eltexBgpLocRibSafi The subsequent address family of the prefix for this Loc-RIB route.	EltexBgpSafi Type Values: 0 none 1 unicast 2 multicast 3 both 4 labeled 65 vpls 70 evpn 128 mplsBgpVpn 241 private	.1.3.6.1.4.1.35265.45.1.3.1.1.2
eltexBgpLocRibPrfxType A type of address prefix in the Network Layer Reachability Information field.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.1.1.3
eltexBgpLocRibPrfx An address prefix in the Network Layer Reachability Information field. The prefix length is specified by eltexBgpLocRibPrfxLen. Any bits beyond the length specified by eltexBgpLocRibPrfxLen are zeroed.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.3.1.1.4
eltexBgpLocRibPrfxLen Length in bits of the IP address prefix in the Network Layer Reachability Information field.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.35265.45.1.3.1.1.5
eltexBgpLocRibPeerOrRib Whether this route was learned from a BGP peer or redistributed from Routing Information Base.	EltexBgpPeerOrRib Type Values: 1 peerIndex 2 ribIndex	.1.3.6.1.4.1.35265.45.1.3.1.1.6
eltexBgpLocRibPeerRibIndex The index of either the BGP peer or RIB this route was learned from. If eltexBgpNlriPrefixPeerOrRib is peer, this field is equivalent to a eltexBgpPeerStatusPeerIndex. If eltexBgpNlriPrefixPeerOrRib is afm, this field…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.1.1.7
eltexBgpLocRibPathId The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this NLRI, otherwise it is zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.1.1.8
eltexBgpLocRibBest An indication of whether or not this route was chosen as the best BGP4 route.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.1.1.9
eltexBgpLocRibAsSize Whether the eltexBgpLocRibASPathStr field contains two or four byte AS numbers.	EltexBgpAsSize Type Values: 1 twoOctet 2 fourOctet	.1.3.6.1.4.1.35265.45.1.3.1.1.10
eltexBgpLocRibASPathStr This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. Two-octet AS numbers appear as four-octet numbers by adding two bytes of zero padding.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.35265.45.1.3.1.1.11
eltexBgpLocRibPathAttrOrigin The ultimate origin of the path information.	EltexBgpOriginCode Type Values: 0 originIgp 1 originEgp 2 originIncomplete	.1.3.6.1.4.1.35265.45.1.3.1.1.12
eltexBgpLocRibPathAttrNextHopType A type of nexthop address received in the UPDATE packet.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.1.1.13
eltexBgpLocRibPathAttrNextHop The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.3.1.1.14
eltexBgpLocRibPathAttrMultExtDisc This metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if eltexBgpLocRibPathAttrMEDPrsnt is TRUE.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.1.1.15
eltexBgpLocRibPathAttrLocalPref The originating BGP4 speaker's degree of preference for an advertised route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.1.1.16
eltexBgpLocRibPathAttrAtomicAgg When this object is set to TRUE, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.1.1.17
eltexBgpLocRibPathAttrAggAS The AS number of the last BGP4 speaker that performed route aggregation.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.3.1.1.18
eltexBgpLocRibPathAttrAggAddr The IP address of the last BGP4 speaker that performed route aggregation. A value of zero indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.3.1.1.19
eltexBgpLocRibPathAttrCalcLclPref The degree of preference calculated by the receiving BGP4 speaker for an advertised route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.1.1.20
eltexBgpLocRibPathAttrOrigId The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.3.1.1.21
eltexBgpLocRibPathAttrWeight The local degree of preference assigned to this route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.1.1.22
eltexBgpLocRibEcmp Whether or not this route was installed into the Forwarding Table as an ECMP route (it may or may not be the best BGP4 route advertised to BGP peers).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.1.1.23
eltexBgpLocRibPathAttrAsPathLimAs The AS number of the speaker that attached the AS_PATHLIMIT attribute. A value of 0 indicates the absence of this attribute. Note that propagation of AS of zero is illegal in the Internet.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.3.1.1.24
eltexBgpLocRibPthAttAsPthLimUpper The upper bound on the number of ASes in the AS_PATH associated with this route before the route will be filtered. Only valid if eltexBgpLocRibPathAttrAsPathLimAs is non-zero.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.35265.45.1.3.1.1.25
eltexBgpLocRibIsActive An indication of whether or not this route is installed in the forwarding table. - 'active' if the route is installed in the forwarding table, or is a route redistributed from another routing protocol…	EltexBgpNlriIsActiveFlag Type Values: 1 notTracked 2 inactive 3 active	.1.3.6.1.4.1.35265.45.1.3.1.1.26
eltexBgpLocRibPathAttrMEDPrsnt If true, then the route has an associated MED attribute, whose value is given in eltexBgpLocRibPathAttrMultExitDisc. If false, the route has no MED attribute, and the value of eltexBgpLocRibPathAttrMultExitDisc is undef…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.1.1.27
eltexBgpLocRibReasonNotBest If eltexBgpLocRibBest is 'true', then this field is set to 'routeIsBest'. Otherwise, it reports the stage in the decision process when the route was determined to be non-best. This is the reason that the…	EltexBgpReasonNotBest Type Values: 0 notConsidered 1 routeIsBest 2 weight 3 localPref 4 localOrigPreferred 5 asPathLen 6 origin 7 med 8 localOrigTieBreaker 9 ebgpVsibgp 10 adminDistance 11 pathCostToNextHop 12 prefExisting 13 identifier 14 clusterLen 15 peerType 16 peerAddress 17 peerPort 18 pathId	.1.3.6.1.4.1.35265.45.1.3.1.1.28
eltexBgpLocRibPeerType If eltexBgpLocRibPeerOrRib is peer, this field indicates whether the source peer is an iBGP or eBGP peer. If false, this field is set to 'none'.	EltexBgpNlriPeerTypes Type Values: 1 none 2 iBGP 3 eBGP	.1.3.6.1.4.1.35265.45.1.3.1.1.29

The BGP-4 Adj-RIB-In Table contains information about all
paths to destination networks received from all BGP4 peers.
Paths from AFMs are not contained within this table.
          
This table reports received routes and path attributes before
import policy has been applied.

eltexBgpAdjRibInEntry row .1.3.6.1.4.1.35265.45.1.3.2.1

Information about a path to a network.

Indexes

eltexBgpProcessId eltexBgpAdjRibInPeerIndex eltexBgpAdjRibInAfi eltexBgpAdjRibInSafi eltexBgpAdjRibInPrfxType eltexBgpAdjRibInPrfx eltexBgpAdjRibInPrfxLen eltexBgpAdjRibInPathId

Column	Syntax	OID
eltexBgpAdjRibInPeerIndex The index of the BGP peer this route was learned from. This field is equivalent to a eltexBgpPeerStatusPeerIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.2.1.1
eltexBgpAdjRibInAfi The address family of the prefix for this Adj-RIB-In route.	EltexBgpAfi Type Values: 0 other 1 ipv4 2 ipv6 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.2.1.2
eltexBgpAdjRibInSafi The subsequent address family of the prefix for this Adj-RIB-In route.	EltexBgpSafi Type Values: 0 none 1 unicast 2 multicast 3 both 4 labeled 65 vpls 70 evpn 128 mplsBgpVpn 241 private	.1.3.6.1.4.1.35265.45.1.3.2.1.3
eltexBgpAdjRibInPrfxType A type of address prefix in the Network Layer Reachability Information field.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.2.1.4
eltexBgpAdjRibInPrfx An address prefix in the Network Layer Reachability Information field. The prefix length is specified by eltexBgpAdjRibInPrfxLen. Any bits beyond the length specified by eltexBgpAdjRibInPrfxLen are zeroe…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.3.2.1.5
eltexBgpAdjRibInPrfxLen Length in bits of the IP address prefix in the Network Layer Reachability Information field.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.35265.45.1.3.2.1.6
eltexBgpAdjRibInPathId The path ID for this NLRI. If BGP additional path receive capability was negotiated with the peer for this AFI/SAFI then this is the received path ID for this NLRI, otherwise it is zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.2.1.7
eltexBgpAdjRibInAsSize Whether the eltexBgpAdjRibInASPathStr field contains two or four byte AS numbers.	EltexBgpAsSize Type Values: 1 twoOctet 2 fourOctet	.1.3.6.1.4.1.35265.45.1.3.2.1.8
eltexBgpAdjRibInASPathStr This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. Two-octet AS numbers appear as four-octet numbers by adding two bytes of zero padding.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.35265.45.1.3.2.1.9
eltexBgpAdjRibInPathAttrOrigin The ultimate origin of the path information.	EltexBgpOriginCode Type Values: 0 originIgp 1 originEgp 2 originIncomplete	.1.3.6.1.4.1.35265.45.1.3.2.1.10
eltexBgpAdjRibInPathAttrNextHopType A type of the nexthop address received in the UPDATE packet.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.2.1.11
eltexBgpAdjRibInPathAttrNextHop The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.3.2.1.12
eltexBgpAdjRibInPathAttrMultiExitDisc This metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if eltexBgpAdjRibInPathAttrMEDPrsnt is TRUE.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.2.1.13
eltexBgpAdjRibInPathAttrLocalPref The originating BGP4 speaker's degree of preference for an advertised route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.2.1.14
eltexBgpAdjRibInPathAttrAtomicAggregate When this object is set to true, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.2.1.15
eltexBgpAdjRibInPathAttrAggregatorAS The AS number of the last BGP4 speaker that performed route aggregation.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.3.2.1.16
eltexBgpAdjRibInPathAttrAggregatorAddr The IP address of the last BGP4 speaker that performed route aggregation. A value of zero indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.3.2.1.17
eltexBgpAdjRibInPathAttrOrigId The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.3.2.1.18
eltexBgpAdjRibInPathAttrAsPathLimAs The AS number of the speaker that attached the AS_PATHLIMIT attribute. A value of 0 indicates the absence of this attribute. Note that propagation of AS of zero is illegal in the Internet.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.3.2.1.19
eltexBgpAdjRibInPathAttrAsPathLimUpper The upper bound on the number of ASes in the AS_PATH associated with this route before the route will be filtered. Only valid if eltexBgpAdjRibInPathAttrAsPathLimAs is non-zero.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.35265.45.1.3.2.1.20
eltexBgpAdjRibInPathAttrMEDPrsnt If true, then the route has an associated MED attribute, whose value is given in eltexBgpAdjRibInPathAttMultiExitDisc. If false, the route has no MED attribute, and the value of eltexBgpAdjRibInPathAttMultiExitDisc is u…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.2.1.21
eltexBgpAdjRibInPathAccepted If true, then the route was accepted by policy. If false it was denied.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.2.1.22

The BGP Adj-RIB-Out Table contains the set of routes
advertised to each peer.

eltexBgpAdjRibOutEntry row .1.3.6.1.4.1.35265.45.1.3.3.1

Information about a path to a network that has been
advertised to a peer. The route has been
explicitly advertised in an UPDATE message sent to the
peer, unless eltexBgpAdjRibOutLocalAggrType has the value
suppressedAg…

Indexes

eltexBgpProcessId eltexBgpPeerStatusPeerIndex eltexBgpAdjRibOutAfi eltexBgpAdjRibOutSafi eltexBgpAdjRibOutPrfxType eltexBgpAdjRibOutPrfx eltexBgpAdjRibOutPrfxLen eltexBgpAdjRibOutPathId

Column	Syntax	OID
eltexBgpAdjRibOutAfi The address family of the prefix for this Adj-RIB Out route.	EltexBgpAfi Type Values: 0 other 1 ipv4 2 ipv6 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.3.1.1
eltexBgpAdjRibOutSafi The subsequent address family of the prefix for this Adj-RIB Out route.	EltexBgpSafi Type Values: 0 none 1 unicast 2 multicast 3 both 4 labeled 65 vpls 70 evpn 128 mplsBgpVpn 241 private	.1.3.6.1.4.1.35265.45.1.3.3.1.2
eltexBgpAdjRibOutPrfxType A type of the address prefix in the Network Layer Reachability Information field for this Adj-RIB Out route.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.3.1.3
eltexBgpAdjRibOutPrfx An address prefix in the Network Layer Reachability Information field for this Adj-RIB Out route. The prefix length is specified by eltexBgpAdjRibOutPrfxLen. Any bits beyond the length specified by eltexB…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.3.3.1.4
eltexBgpAdjRibOutPrfxLen Length in bits of the address prefix contained in the eltexBgpAdjRibOutPrfx object.	INET-ADDRESS-MIBInetAddressPrefixLength Type Constraints: range: 0..2040	.1.3.6.1.4.1.35265.45.1.3.3.1.5
eltexBgpAdjRibOutPathId The path ID for this Adj-RIB Out route. If BGP additional path send capability was negotiated with the peer for this AFI/SAFI then this is the path ID sent for this Adj-RIB Out route, otherwise it is zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.3.1.6
eltexBgpAdjRibOutBest An indication of whether or not this route was chosen as the best BGP4 route.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.3.1.7
eltexBgpAdjRibOutAdvertStatus This object indicates the current state of advertisement of the route to the peer. A value of advertised(1) indicates that the route has been advertised to the peer. A value of suppressed(2…	Enumeration Enumerated Values: 1 advertised 2 suppressed 3 pendingWithdrawal 4 withdrawn	.1.3.6.1.4.1.35265.45.1.3.3.1.8
eltexBgpAdjRibOutLocalAggrType This object indicates any aggregation processing that has been applied to this Adj-RIB-Out route. A value of noAggregation(1) indicates that this route does not aggregate any other routes, and is not aggr…	Enumeration Enumerated Values: 1 noAggregation 2 aggregateRoute 3 unsuppAggregatedRoute 4 suppressedAggregatedRoute	.1.3.6.1.4.1.35265.45.1.3.3.1.9
eltexBgpAdjRibOutAsSize Whether the eltexBgpAdjRibOutASPathStr object contains two or four byte AS numbers.	EltexBgpAsSize Type Values: 1 twoOctet 2 fourOctet	.1.3.6.1.4.1.35265.45.1.3.3.1.10
eltexBgpAdjRibOutASPathStr This is a string containing the autonomous system path sent to this peer in the AS_PATH attribute for this Adj-RIB-Out route. Two-octet AS numbers appear as four-octet numbers by adding two bytes of zero padding.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.35265.45.1.3.3.1.11
eltexBgpAdjRibOutOrigin The ultimate origin of the path information.	EltexBgpOriginCode Type Values: 0 originIgp 1 originEgp 2 originIncomplete	.1.3.6.1.4.1.35265.45.1.3.3.1.12
eltexBgpAdjRibOutNextHopType A type of the next hop address transmitted in the UPDATE packet.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.3.1.13
eltexBgpAdjRibOutNextHop The next hop address transmitted in the UPDATE packet. The address family of this object is the same as that of eltexBgpAdjRibOutPrfx.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.3.3.1.14
eltexBgpAdjRibOutMultiExitDisc This metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if eltexBgpAdjRibOutMEDPrsnt is TRUE.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.3.1.15
eltexBgpAdjRibOutLocalPref The local preference for this Adj-RIB-Out route, as transmitted in the UPDATE message sent to the peer.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.3.1.16
eltexBgpAdjRibOutAtomicAggregate When this object is set to true, the ATOMIC_AGGREGATE Path Attribute was included in the UPDATE sent to the peer for this Adj-RIB-Out route.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.3.1.17
eltexBgpAdjRibOutAggregatorAS The AS number of the last BGP4 speaker that performed route aggregation.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.3.3.1.18
eltexBgpAdjRibOutAggregatorAddr The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates that this attribute was not included in the UPDATE message sent to the peer.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.3.3.1.19
eltexBgpAdjRibOutOrigId The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.	EltexBgpIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.35265.45.1.3.3.1.20
eltexBgpAdjRibOutEcmp Whether or not this route was installed into the Forwarding Table as an ECMP route (it may or may not be the best BGP4 route advertised to BGP peers).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.3.1.21
eltexBgpAdjRibOutAsLimAs If non-zero this is the number of the AS that attached the AS_PATHLIMIT attribute.	EltexBgpAutonomousSystemNumber	.1.3.6.1.4.1.35265.45.1.3.3.1.22
eltexBgpAdjRibOutAsLimUpper The upper bound on the number of ASes in the AS_PATH attribute after which the route will be filtered. Only valid if eltexBgpAdjRibOutAsLimAs is non-zero.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.35265.45.1.3.3.1.23
eltexBgpAdjRibOutIsActive An indication of whether or not this route is installed in the forwarding table. - 'active' if the route is installed in the forwarding table, or is a route redistributed from another routing protocol…	EltexBgpNlriIsActiveFlag Type Values: 1 notTracked 2 inactive 3 active	.1.3.6.1.4.1.35265.45.1.3.3.1.24
eltexBgpAdjRibOutMEDPrsnt If true, then the route has an associated MED attribute, whose value is given in eltexBgpAdjRibOutMultiExitDisc. If false, the route has no MED attribute, and the value of eltexBgpAdjRibOutMultiExitDisc is undefined.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.35265.45.1.3.3.1.25
eltexBgpAdjRibOutPeerType This field indicates whether the source peer is an iBGP or eBGP peer.	EltexBgpNlriPeerTypes Type Values: 1 none 2 iBGP 3 eBGP	.1.3.6.1.4.1.35265.45.1.3.3.1.26

BGP network configuration table.
          
This table allows a user to configure internal networks
advertised via BGP.

eltexBgpNetworkEntry row .1.3.6.1.4.1.35265.45.1.3.4.1

Entry containing information about the internal network
announced via BGP.

Indexes

eltexBgpProcessId eltexBgpNetworkAfi eltexBgpNetworkSafi eltexBgpNetworkPrfxType eltexBgpNetworkPrfx eltexBgpNetworkPrfxLen

Column	Syntax	OID
eltexBgpNetworkAfi The address family of the prefix for this route.	EltexBgpAfir/w Type Values: 0 other 1 ipv4 2 ipv6 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.4.1.1
eltexBgpNetworkSafi The subsequent address family of the prefix for this route.	EltexBgpSafir/w Type Values: 0 none 1 unicast 2 multicast 3 both 4 labeled 65 vpls 70 evpn 128 mplsBgpVpn 241 private	.1.3.6.1.4.1.35265.45.1.3.4.1.2
eltexBgpNetworkPrfxType A type of address prefix.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.35265.45.1.3.4.1.3
eltexBgpNetworkPrfx An address prefix.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.35265.45.1.3.4.1.4
eltexBgpNetworkPrfxLen Length in bits of the address prefix contained in the eltexBgpNetworkPrfx object.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.35265.45.1.3.4.1.5
eltexBgpNetworkRowStatus The row status for this BGP Network Table entry, used to create and destroy table entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.35265.45.1.3.4.1.6

The BGP-4 Path Attribute Cluster Table contains the per
network path (NLRI) data on the reflection path which a
route has traversed.  The absence of row data for a given
network path indicates a lack of this attribute information
for the indicated network path.
          
This table reports received routes and path attributes after
import policy has been applied.  Only routes accepted by
import policy are reported.

eltexBgpPathAttrClusterLocEntry row .1.3.6.1.4.1.35265.45.1.3.5.1.1.1

Information about a cluster traversal provided with a path to
a network.

Indexes

eltexBgpProcessId eltexBgpLocRibPeerOrRib eltexBgpLocRibPeerRibIndex eltexBgpLocRibAfi eltexBgpLocRibSafi eltexBgpLocRibPrfx eltexBgpLocRibPrfxLen eltexBgpLocRibPathId eltexBgpPathAttrClusterLocIndex

Column	Syntax	OID
eltexBgpPathAttrClusterLocIndex An integral index for a row in this table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.5.1.1.1.1
eltexBgpPathAttrClusterLocValue A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as r…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.35265.45.1.3.5.1.1.1.2