EKINOPS-Rm10010-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
95
Rows
95
Columns
534
.1.3.6.1.4.1.20044.53.2.2.1.56
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmclientNetworkLaneAlarmWarningTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmclientNetworkLaneAlarmWarningTable'
List of rm10010AlmclientNetworkLaneAlarmWarning Article
Row definition for the rm10010AlmclientNetworkLaneAlarmWarning
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmclientNetworkLaneAlarmWarning
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.2.1.56.1.1 |
||||
|
Client Trscv Rx Power Low Alarm
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.2 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.3 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.4 |
||||
|
Client Trscv Rx Power High Alarm
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.5 |
||||
|
Client Trscv Laser Temp Low Alarm
:This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Laser Temperature is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.6 |
||||
|
Client Trscv Laser Temp Low Warning
:This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Laser Temperature is … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.7 |
||||
|
Client Trscv Laser Temp High Warning
:This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Laser Temperature i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.8 |
||||
|
Client Trscv Laser Temp High Alarm
:This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Laser Temperature is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.9 |
||||
|
Client Trscv Tx Power Low Alarm
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is lower than the t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.10 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.11 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.12 |
||||
|
Client Trscv Tx Power High Alarm
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is higher than th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.13 |
||||
|
Client Trscv Bias Low Alarm :This
OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.14 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.15 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.16 |
||||
|
Client Trscv Bias High Alarm :This
OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.56.1.17 |
.1.3.6.1.4.1.20044.53.2.2.1.232
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmclientSfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmclientSfpWarnDdmTable'
List of rm10010AlmclientSfpWarnDdm Article
Row definition for the rm10010AlmclientSfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmclientSfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.2.1.232.1.1 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.2 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.3 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.4 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.5 |
||||
|
Client Trscv Power Supply Low
Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.6 |
||||
|
Client Trscv Power Supply High
Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.7 |
||||
|
Client Trscv Temp Low Warning
:This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.8 |
||||
|
Client Trscv Temp High Warning
:This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.9 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.16 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.1.232.1.17 |
.1.3.6.1.4.1.20044.53.2.2.2.72
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmclientNetworkLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmclientNetworkLaneFaultTable'
List of rm10010AlmclientNetworkLaneFault Article
Row definition for the rm10010AlmclientNetworkLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmclientNetworkLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.2.2.72.1.1 |
||||
|
Client Network Lane Rx FIFO Error
:This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_FIFO_ERROR … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.4 |
||||
|
Client Network Lane Rx Loss Of
Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_LOL <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.5 |
||||
|
Client Network Lane Rx Loss Of
Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.6 |
||||
|
Client Network Lane Tx Loss Of
Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_TX_LOL <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.8 |
||||
|
Client Network Lane Tx Loss Of
Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Signal Functionality on the Client Tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.9 |
||||
|
Client Network Lane APD Power
Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supply failure on the Client Trscv Network Lane <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.15 |
||||
|
Client Network Lane Wavelength
Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_WAV… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.16 |
||||
|
Client Network Lane TEC Fault
:This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network Lane <Condtype> CLIENT_LANE_TEC_FAULT <Probcause> tran… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.72.1.17 |
.1.3.6.1.4.1.20044.53.2.2.2.88
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmclientHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmclientHostLaneFaultTable'
List of rm10010AlmclientHostLaneFault Article
Row definition for the rm10010AlmclientHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmclientHostLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.2.2.88.1.1 |
||||
|
Client Frame Alignment Loss :This
OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned with the incoming client signal <Condtype> CLIENT_LOSS_OF… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Client Trscv <Condtype> CLIENT_INPUT_LOSS_OF_SIG <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.3 |
||||
|
Client Lanes Marker Unlock :This
OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not lock <Condtype> CLIENT_LANES_MARKER_UNLOCK <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.4 |
||||
|
Client Lanes 64/66b Unlock :This
OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> CLIENT_LANES_64_66_UNLOCK <Probcause> receiveFailure (41… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.5 |
||||
|
Client Lanes Not Aligned :This
OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_NOT_ALIGNED <Probcause> receiveFailure (41) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.6 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.7 |
||||
|
Client Host Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Host Lane <Condtype> CLIENT_TX_HOST_LOL <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.10 |
||||
|
Client Host Lane Tx FIFO Error
:This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Host Lane <Condtype> CLIENT_LANE_TX_FIFO_ERROR <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.88.1.11 |
.1.3.6.1.4.1.20044.53.2.2.2.216
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmclientSfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmclientSfpAlmDdmTable'
List of rm10010AlmclientSfpAlmDdm Article
Row definition for the rm10010AlmclientSfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmclientSfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.2.2.216.1.1 |
||||
|
Client Trscv Tx Power Low :This
OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is lower … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.2 |
||||
|
Client Trscv Tx Power High :This
OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is high… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.3 |
||||
|
Client Trscv Bias Low :This OID
indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.4 |
||||
|
Client Trscv Bias High :This OID
indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.5 |
||||
|
Client Trscv Power Supply Low
:This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is lo… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.6 |
||||
|
Client Trscv Power Supply High
:This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.7 |
||||
|
Client Trscv Temp Low :This OID
indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.8 |
||||
|
Client Trscv Temp High :This OID
indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.9 |
||||
|
Client Trscv Rx Power Low :This
OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.16 |
||||
|
Client Trscv Rx Power High :This
OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.2.216.1.17 |
.1.3.6.1.4.1.20044.53.2.2.3.8
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmsynthAlmPortTable'
List of rm10010AlmsynthAlmPort Article
Row definition for the rm10010AlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.2.3.8.1.1 |
||||
|
Client Optical Module Absent :This
OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver is not plugged <Condtype> SFP_ABSENT_1 <Probcause> inp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.2 |
||||
|
DDM Supported On Client Trscv
:This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feature <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.5 |
||||
|
Client Trscv Laser Shutdown :This
OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdown <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.7 |
||||
|
Remote Client Port In Service
:This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE_O… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.9 |
||||
|
Warning On Client Trscv DDM :This
OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> SFP_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.10 |
||||
|
Alarm On Client Trscv DDM :This
OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> SFP_DDM_AL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.13 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client po… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.53.2.3.1.104
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmlineNetworkLaneAlarmWarning1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmlineNetworkLaneAlarmWarning1Table'
List of rm10010AlmlineNetworkLaneAlarmWarning1 Article
Row definition for the rm10010AlmlineNetworkLaneAlarmWarning1
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmlineNetworkLaneAlarmWarning1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.3.1.104.1.1 |
||||
|
Line Trscv Rx Power Low Alarm
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is lower than the thres… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.2 |
||||
|
Line Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.3 |
||||
|
Line Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.4 |
||||
|
Line Trscv Rx Power High Alarm
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is higher than the th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.5 |
||||
|
Line Trscv Tx Laser Temp Low Alarm
:This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperature … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.6 |
||||
|
Line Trscv Tx Laser Temp Low Warning
:This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temperat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.7 |
||||
|
Line Trscv Tx Laser Temp High
Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temper… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.8 |
||||
|
Line Trscv Tx Laser Temp High
Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperatur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.9 |
||||
|
Line Trscv Tx Power Low Alarm
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.10 |
||||
|
Line Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.11 |
||||
|
Line Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.12 |
||||
|
Line Trscv Tx Power High Alarm
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.13 |
||||
|
Line Trscv Tx Bias Low Alarm :This
OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is lower t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.14 |
||||
|
Line Trscv Tx Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is low… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.15 |
||||
|
Line Trscv Tx Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is h… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.16 |
||||
|
Line Trscv Tx Bias High Alarm
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is highe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.104.1.17 |
.1.3.6.1.4.1.20044.53.2.3.1.120
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmlineNetworkLaneAlarmWarning2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmlineNetworkLaneAlarmWarning2Table'
List of rm10010AlmlineNetworkLaneAlarmWarning2 Article
Row definition for the rm10010AlmlineNetworkLaneAlarmWarning2
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmlineNetworkLaneAlarmWarning2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.3.1.120.1.1 |
||||
|
Line Trscv Tx Modulator Bias Low
Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulator… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.2 |
||||
|
Line Trscv Tx Modulator Bias Low
Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx modul… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.3 |
||||
|
Line Trscv Tx Modulator Bias High
Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx mod… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.4 |
||||
|
Line Trscv Tx Modulator Bias High
Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.5 |
||||
|
Line Trscv Rx Laser Temp Low Alarm
:This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperature … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.6 |
||||
|
Line Trscv Rx Laser Temp Low Warning
:This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temperat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.7 |
||||
|
Line Trscv Rx Laser Temp High
Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temper… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.8 |
||||
|
Line Trscv Rx Laser Temp High
Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperatur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.9 |
||||
|
Line Trscv Rx Output Power Low
Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is lower… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.10 |
||||
|
Line Trscv Rx Output Power Low
Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is l… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.11 |
||||
|
Line Trscv Rx Output Power High
Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.12 |
||||
|
Line Trscv Rx Output Power High
Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is hig… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.13 |
||||
|
Line Trscv Rx Bias Low Alarm :This
OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is l… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.14 |
||||
|
Line Trscv Rx Bias Low Warning
:This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias current … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.15 |
||||
|
Line Trscv Rx Bias High Warning
:This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias curren… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.16 |
||||
|
Line Trscv Rx Bias High Alarm
:This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.1.120.1.17 |
.1.3.6.1.4.1.20044.53.2.3.2.136
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmlineNetworkLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmlineNetworkLaneFaultTable'
List of rm10010AlmlineNetworkLaneFault Article
Row definition for the rm10010AlmlineNetworkLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmlineNetworkLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.3.2.136.1.1 |
||||
|
Line Network Lane Rx TEC Fault
:This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_TEC_FAULT <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.3 |
||||
|
Line Network Lane Rx FIFO Error
:This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_FIFO_ERROR <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.4 |
||||
|
Line Network Lane Rx Loss Of Lock
:This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_LOL <Probcaus… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.5 |
||||
|
Line Network Lane Rx Loss Of Signal
:This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_LOS <Pr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.6 |
||||
|
Line Network Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Network Lane <Condtype> LINE_LANE_TX_LOL <Probcaus… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.8 |
||||
|
Line Network Lane Tx Loss Of Signal
Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Signal Functionality on the Line Trscv Ne… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.9 |
||||
|
Line Network Lane APD Power Supply
:This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply failure on the Line Trscv Network Lane <Condtype> LINE_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.15 |
||||
|
Line Network Lane Wavelength Unlock
:This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the Line Trscv Network Lane <Condtype> LINE_LANE_WAVELENGTH… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.16 |
||||
|
Line Network Lane TEC Fault :This
OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network Lane <Condtype> LINE_LANE_TEC_FAULT <Probcause> transm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.136.1.17 |
.1.3.6.1.4.1.20044.53.2.3.2.152
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmlineHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmlineHostLaneFaultTable'
List of rm10010AlmlineHostLaneFault Article
Row definition for the rm10010AlmlineHostLaneFault
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmlineHostLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.3.2.152.1.1 |
||||
|
Line Input Loss Of Signal :This
OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line Trscv <Condtype> LINE_INPUT_LOSS_OF_SIGNAL <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.2 |
||||
|
Line Loss Of Frame :This OID indicates
the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incoming Line signal <Condtype> LINE_LOSS_OF_FRAME <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.3 |
||||
|
Line SM BDI Inserted :This OID
indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.4 |
||||
|
Line SM BDI Detected :This OID
indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal <Con… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.5 |
||||
|
Line SM IAE Inserted :This OID
indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment Error is inserted on the outgoing Line signal <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.6 |
||||
|
Line SM IAE Detected :This OID
indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment Error is detected on the incoming Line signal <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.7 |
||||
|
Line Host Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Host Lane <Condtype> LINE_TX_HOST_LOL <Probcause> receiv… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.10 |
||||
|
Line Host Lane Tx FIFO Error :This
OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lane <Condtype> LINE_LANE_TX_FIFO_ERROR <Probcause> recei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.152.1.11 |
.1.3.6.1.4.1.20044.53.2.3.2.168
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmlineNetworkLaneRxOtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmlineNetworkLaneRxOtnTable'
List of rm10010AlmlineNetworkLaneRxOtn Article
Row definition for the rm10010AlmlineNetworkLaneRxOtn
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmlineNetworkLaneRxOtn
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.3.2.168.1.1 |
||||
|
Line Network Rx ODU AIS :This
OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an ODU Alarm Indication Signal is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.10 |
||||
|
Line Network Rx OTU AIS :This
OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an OTU Alarm Indication Signal is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.11 |
||||
|
Line Network Rx SM BDI :This OID
indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an SM Backward Defect Indication is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.12 |
||||
|
Line Network Rx IAE :This OID
indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incoming Alignment Error is detected on the Rx Network inter… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.13 |
||||
|
Line Network Rx OOM :This OID
indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe is detected on the Rx Network interface of the Li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.14 |
||||
|
Line Network Rx LOM :This OID
indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe is detected on the Rx Network interface of the Li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.15 |
||||
|
Line Network Rx OOF :This OID
indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected on the Rx Network interface of the Line Trscv <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.16 |
||||
|
Line Network Rx LOF :This OID
indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected on the Rx Network interface of the Line Trscv <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.168.1.17 |
.1.3.6.1.4.1.20044.53.2.3.2.184
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmlineHostLaneTxOtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmlineHostLaneTxOtnTable'
List of rm10010AlmlineHostLaneTxOtn Article
Row definition for the rm10010AlmlineHostLaneTxOtn
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmlineHostLaneTxOtn
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.3.2.184.1.1 |
||||
|
Line Host Tx ODU AIS :This OID
indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an ODU Alarm Indication Signal is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.10 |
||||
|
Line Host Tx OTU AIS :This OID
indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OTU Alarm Indication Signal is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.11 |
||||
|
Line Host Tx SM BDI :This OID
indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM Backward Defect Indication is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.12 |
||||
|
Line Host Tx IAE :This OID indicates
an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Alignment Error is detected on the Tx Host interface of t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.13 |
||||
|
Line Host Tx OOM :This OID indicates
an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe is detected on the Tx Host interface of the Line Trscv … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.14 |
||||
|
Line Host Tx LOM :This OID indicates
a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.15 |
||||
|
Line Host Tx OOF :This OID indicates
an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected on the Tx Host interface of the Line Trscv <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.16 |
||||
|
Line Host Tx LOF :This OID indicates
a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.2.184.1.17 |
.1.3.6.1.4.1.20044.53.2.3.3.24
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010AlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010AlmsynthAlmLineTable'
List of rm10010AlmsynthAlmLine Article
Row definition for the rm10010AlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010AlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.2.3.3.24.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugged <Condtype> XFP_ABSENT <Probcause> inputOutputDeviceE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_NOT_COMPL <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.5 |
||||
|
Line Trscv Laser Shutdown :This
OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Condtype> XFP_TX_OFF <Probcause> other (1) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informationalSt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.9 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condtype> LINE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> LINE_DDM_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.11 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.13 |
||||
|
Line Active :This OID indicates
whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> o… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.2.3.3.24.1.17 |
.1.3.6.1.4.1.20044.53.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrclientNetTxTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrclientNetTxTempTable'
List of rm10010MesrclientNetTxTemp Article
Row definition for the rm10010MesrclientNetTxTemp
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrclientNetTxTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.2.16.1.1 |
|
Client Trscv Temperature :This
OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This Measure gives the Las… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.2.16.1.2 |
.1.3.6.1.4.1.20044.53.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrclientNetTxBiasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrclientNetTxBiasTable'
List of rm10010MesrclientNetTxBias Article
Row definition for the rm10010MesrclientNetTxBias
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrclientNetTxBias
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.2.32.1.1 |
|
Client Trscv Laser Bias :This
OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This Measure gives the Laser bias value … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.2.32.1.2 |
.1.3.6.1.4.1.20044.53.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrclientNetTxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrclientNetTxPwrTable'
List of rm10010MesrclientNetTxPwr Article
Row definition for the rm10010MesrclientNetTxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrclientNetTxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.2.48.1.1 |
|
Client Trscv Tx Power :This OID
gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This Measure gives the transm… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.2.48.1.2 |
.1.3.6.1.4.1.20044.53.3.2.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrclientNetRxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrclientNetRxPwrTable'
List of rm10010MesrclientNetRxPwr Article
Row definition for the rm10010MesrclientNetRxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrclientNetRxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.2.64.1.1 |
|
Client Trscv Rx Power :This OID
gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This Measure gives the receive p… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.2.64.1.2 |
.1.3.6.1.4.1.20044.53.3.3.80
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineNetTxLaserOutputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineNetTxLaserOutputPwrTable'
List of rm10010MesrlineNetTxLaserOutputPwr Article
Row definition for the rm10010MesrlineNetTxLaserOutputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineNetTxLaserOutputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.80.1.1 |
|
Current Line Trscv Tx Power :This
OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Tx… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.80.1.2 |
.1.3.6.1.4.1.20044.53.3.3.96
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineNetTxLaserTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineNetTxLaserTempTable'
List of rm10010MesrlineNetTxLaserTemp Article
Row definition for the rm10010MesrlineNetTxLaserTemp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineNetTxLaserTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.96.1.1 |
|
Current Line Trscv Tx Laser Temperature
:This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This Measur… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.96.1.2 |
.1.3.6.1.4.1.20044.53.3.3.112
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineNetTxBiasCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineNetTxBiasCurrentTable'
List of rm10010MesrlineNetTxBiasCurrent Article
Row definition for the rm10010MesrlineNetTxBiasCurrent
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineNetTxBiasCurrent
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.112.1.1 |
|
Current Line Trscv Tx Laser Bias
:This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) <Help> This Measure gives the Tx Laser… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.112.1.2 |
.1.3.6.1.4.1.20044.53.3.3.128
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineNetRxInputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineNetRxInputPwrTable'
List of rm10010MesrlineNetRxInputPwr Article
Row definition for the rm10010MesrlineNetRxInputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineNetRxInputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.128.1.1 |
|
Current Line Trscv Rx Power :This
OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Receive powe… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.128.1.2 |
.1.3.6.1.4.1.20044.53.3.3.144
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineResidualChromaticDispTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineResidualChromaticDispTable'
List of rm10010MesrlineResidualChromaticDisp Article
Row definition for the rm10010MesrlineResidualChromaticDisp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineResidualChromaticDisp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.144.1.1 |
|
Current Residual Chromatic Dispersion
:This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives the current Residual Chromatic Dispersion on the Line … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.144.1.2 |
.1.3.6.1.4.1.20044.53.3.3.148
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineDiffGroupDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineDiffGroupDelayTable'
List of rm10010MesrlineDiffGroupDelay Article
Row definition for the rm10010MesrlineDiffGroupDelay
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineDiffGroupDelay
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.148.1.1 |
|
Current Differential Group Delay
:This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Differential Group Delay on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.148.1.2 |
.1.3.6.1.4.1.20044.53.3.3.152
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineQFactorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineQFactorTable'
List of rm10010MesrlineQFactor Article
Row definition for the rm10010MesrlineQFactor
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineQFactor
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.152.1.1 |
|
Current Q Factor :This OID gives
the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.152.1.2 |
.1.3.6.1.4.1.20044.53.3.3.156
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineCarrierFreqOffsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineCarrierFreqOffsetTable'
List of rm10010MesrlineCarrierFreqOffset Article
Row definition for the rm10010MesrlineCarrierFreqOffset
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineCarrierFreqOffset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.156.1.1 |
|
Current Carrier Frequency Offset
:This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current Carrier Frequency Offset on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.156.1.2 |
rm10010MesrlineOsnrTable
table.1.3.6.1.4.1.20044.53.3.3.160
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MesrlineOsnrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MesrlineOsnrTable'
List of rm10010MesrlineOsnr Article
Row definition for the rm10010MesrlineOsnr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the rm10010MesrlineOsnr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.3.3.160.1.1 |
|
Current OSNR :This OID gives the
current OSNR on the Line interface (OSNR = AV/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.53.3.3.160.1.2 |
.1.3.6.1.4.1.20044.53.4.2.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntclientInputErrorCounterLaneOneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntclientInputErrorCounterLaneOneTable'
List of rm10010CntclientInputErrorCounterLaneOne Article
Row definition for the rm10010CntclientInputErrorCounterLaneOne
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntclientInputErrorCounterLaneOne
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.2.16.1.1 |
||||
|
Client_Input_Error_Counter_Lane1
:This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This counter is incremented each time a coding violation is … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.4.2.16.1.2 |
||||
|
Client Input Counter Error :This
OID when set indicates the rate adaptation removal counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.16.1.3 |
||||
|
Client Input Counter Overload
:This OID when set indicates a rate adaptation removal counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.16.1.4 |
.1.3.6.1.4.1.20044.53.4.2.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntclientInputErrorCounterLaneTwoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntclientInputErrorCounterLaneTwoTable'
List of rm10010CntclientInputErrorCounterLaneTwo Article
Row definition for the rm10010CntclientInputErrorCounterLaneTwo
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntclientInputErrorCounterLaneTwo
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.2.32.1.1 |
||||
|
Client_Input_Error_Counter_Lane2
:This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This counter is incremented each time a coding violation is … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.4.2.32.1.2 |
||||
|
Client Input Counter Error :This
OID when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.32.1.3 |
||||
|
Client Input Counter Overload
:This OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.32.1.4 |
.1.3.6.1.4.1.20044.53.4.2.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntclientInputErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntclientInputErrorCounterTable'
List of rm10010CntclientInputErrorCounter Article
Row definition for the rm10010CntclientInputErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntclientInputErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.2.80.1.1 |
||||
|
Client Input Errors :This counter
is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the number of 10b/8b running disparity errors on the cli… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.4.2.80.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.80.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.80.1.4 |
.1.3.6.1.4.1.20044.53.4.2.96
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntclientCbipCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntclientCbipCounterTable'
List of rm10010CntclientCbipCounter Article
Row definition for the rm10010CntclientCbipCounter
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntclientCbipCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.2.96.1.1 |
||||
|
Client Output Errors :This counter
is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of CBIP errors on the client port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.4.2.96.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the CBIP error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.96.1.3 |
||||
|
Client CBIP Counter Overload :This
OID when set indicates a CBIP error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.2.96.1.4 |
.1.3.6.1.4.1.20044.53.4.3.192
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntlocalLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntlocalLineSmBip8ErrorCounterTable'
List of rm10010CntlocalLineSmBip8ErrorCounter Article
Row definition for the rm10010CntlocalLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntlocalLineSmBip8ErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.3.192.1.1 |
||||
|
Line Input SM-BIP8 Errors :This
OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.4.3.192.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.192.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.192.1.4 |
.1.3.6.1.4.1.20044.53.4.3.193
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntlocalLineFecCorrectedErrorsCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntlocalLineFecCorrectedErrorsCounterTable'
List of rm10010CntlocalLineFecCorrectedErrorsCounter Article
Row definition for the rm10010CntlocalLineFecCorrectedErrorsCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntlocalLineFecCorrectedErrorsCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.3.193.1.1 |
||||
|
Line Input HD FEC Corrected Errors
:This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate before the Hard Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.4.3.193.1.2 |
||||
|
FEC Counter Error :This bit when
set indicates the FEC corrected errors counter value is invalid on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.193.1.3 |
||||
|
FEC Counter Overload :This bit
when set indicates a FEC corrected errors counter overload on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.193.1.4 |
.1.3.6.1.4.1.20044.53.4.3.194
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntremoteLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntremoteLineSmBip8ErrorCounterTable'
List of rm10010CntremoteLineSmBip8ErrorCounter Article
Row definition for the rm10010CntremoteLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntremoteLineSmBip8ErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.3.194.1.1 |
||||
|
Remote SM BIP8 :This OID gives
the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remot… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.4.3.194.1.2 |
||||
|
Remote Counter Error :
|
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.194.1.3 |
||||
|
Remote Counter Overload :
|
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.194.1.4 |
.1.3.6.1.4.1.20044.53.4.3.195
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntlineDfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntlineDfrmTimCntTable'
List of rm10010CntlineDfrmTimCnt Article
Row definition for the rm10010CntlineDfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntlineDfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.3.195.1.1 |
||||
|
Line Timer Counter :
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.4.3.195.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.195.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.195.1.4 |
.1.3.6.1.4.1.20044.53.4.3.196
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntlocalLineTrscvFecCorrectedErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntlocalLineTrscvFecCorrectedErrorCounterTable'
List of rm10010CntlocalLineTrscvFecCorrectedErrorCounter Article
Row definition for the rm10010CntlocalLineTrscvFecCorrectedErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntlocalLineTrscvFecCorrectedErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.3.196.1.1 |
||||
|
Line Input SD FEC Corrected Errors
:This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.4.3.196.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.196.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.196.1.4 |
.1.3.6.1.4.1.20044.53.4.3.197
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CntlocalLineTrscvFecUncorrectedErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CntlocalLineTrscvFecUncorrectedErrorCounterTable'
List of rm10010CntlocalLineTrscvFecUncorrectedErrorCounter Article
Row definition for the rm10010CntlocalLineTrscvFecUncorrectedErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CntlocalLineTrscvFecUncorrectedErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.4.3.197.1.1 |
||||
|
SD Uncorrected :This OID gives
the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.4.3.197.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.197.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.4.3.197.1.4 |
.1.3.6.1.4.1.20044.53.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlaccessLoopTable'
List of rm10010CtrlaccessLoop Article
Row definition for the rm10010CtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help> This control enables the Out Loopback on the client… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.2.16.1.2 |
.1.3.6.1.4.1.20044.53.6.2.17
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlclientLoopToLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlclientLoopToLineTable'
List of rm10010CtrlclientLoopToLine Article
Row definition for the rm10010CtrlclientLoopToLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlclientLoopToLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.2.17.1.1 |
||||
|
Client Terminal Loopback :This
OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control enables the In Loopback on the client port, looping the c… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.2.17.1.2 |
rm10010CtrlcsfUpInsTable
table.1.3.6.1.4.1.20044.53.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlcsfUpInsTable'
List of rm10010CtrlcsfUpIns Article
Row definition for the rm10010CtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.2.21.1.2 |
.1.3.6.1.4.1.20044.53.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlcaisDwInsTable'
List of rm10010CtrlcaisDwIns Article
Row definition for the rm10010CtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.2.22.1.2 |
.1.3.6.1.4.1.20044.53.6.2.262
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlclientResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlclientResetAllCountTable'
List of rm10010CtrlclientResetAllCount Article
Row definition for the rm10010CtrlclientResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlclientResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.2.262.1.1 |
||||
|
Client Counters Reset :This OID
resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history client port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.2.262.1.2 |
.1.3.6.1.4.1.20044.53.6.3.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlcommAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlcommAccessLoopTable'
List of rm10010CtrlcommAccessLoop Article
Row definition for the rm10010CtrlcommAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlcommAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.64.1.1 |
||||
|
Line Terminal Loopback :This OID,
when set, puts the module in common access loop back, looping the 100 Gb/s output signal on the 100 Gb/s input.<Help> This control enables the In Loopback on the line port, loopin… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.64.1.2 |
rm10010CtrllineLoopTable
table.1.3.6.1.4.1.20044.53.6.3.66
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrllineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrllineLoopTable'
List of rm10010CtrllineLoop Article
Row definition for the rm10010CtrllineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrllineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.66.1.1 |
||||
|
Line Facility Loopback :This OID,
when set at '1' puts the module in line loopback mode, looping the received 100 Gb/s signal on the transmit 100 Gb/s output. The Upstream part of the module is timed on the 100 Gb… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.66.1.2 |
.1.3.6.1.4.1.20044.53.6.3.69
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlfecDisableTable'
List of rm10010CtrlfecDisable Article
Row definition for the rm10010CtrlfecDisable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlfecDisable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.69.1.1 |
||||
|
Forward Error Correction Inhibition
:This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables the Forward Error Correction on the line interface |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.69.1.2 |
.1.3.6.1.4.1.20044.53.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlmsaLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlmsaLineLoopTable'
List of rm10010CtrlmsaLineLoop Article
Row definition for the rm10010CtrlmsaLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlmsaLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.209.1.1 |
||||
|
MSA Line Loop :This OID operates
a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.209.1.2 |
.1.3.6.1.4.1.20044.53.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlmsaTxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlmsaTxResetTable'
List of rm10010CtrlmsaTxReset Article
Row definition for the rm10010CtrlmsaTxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlmsaTxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.210.1.1 |
||||
|
Line MSA TX Reset :This OID resets
the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.210.1.2 |
.1.3.6.1.4.1.20044.53.6.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlmsaRxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlmsaRxResetTable'
List of rm10010CtrlmsaRxReset Article
Row definition for the rm10010CtrlmsaRxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlmsaRxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.211.1.1 |
||||
|
Line MSA RX Reset :This OID resets
the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.211.1.2 |
.1.3.6.1.4.1.20044.53.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrlmsaShutdownTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrlmsaShutdownTable'
List of rm10010CtrlmsaShutdown Article
Row definition for the rm10010CtrlmsaShutdown
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrlmsaShutdown
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.212.1.1 |
||||
|
Line MSA Shutdown :This OID enters
a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.212.1.2 |
.1.3.6.1.4.1.20044.53.6.3.263
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CtrllineResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CtrllineResetAllCountTable'
List of rm10010CtrllineResetAllCount Article
Row definition for the rm10010CtrllineResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010CtrllineResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.6.3.263.1.1 |
||||
|
Line Counters Reset :This OID
resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.53.6.3.263.1.2 |
rm10010RinvSfpTable
table.1.3.6.1.4.1.20044.53.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010RinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010RinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.53.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.53.7.1.1.1.2 |
rm10010RinvLineTable
table.1.3.6.1.4.1.20044.53.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010RinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010RinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.53.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.53.7.1.2.1.2 |
.1.3.6.1.4.1.20044.53.9.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.1.1.1.3 |
.1.3.6.1.4.1.20044.53.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.2.1.1.3 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.2.1.1.4 |
|
Default Options on Client Port
:This register configures the default options on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.2.1.1.14 |
.1.3.6.1.4.1.20044.53.9.2.2
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgLineStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgLineStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.2.2.1.1 |
|
Default Settings on Line :This
register configures the default initialisation settings on Line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.2.2.1.3 |
|
Default Options on Line :This
register configures the default options on the line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.2.2.1.14 |
rm10010CfgXfpTable
table.1.3.6.1.4.1.20044.53.9.2.3
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.2.3.1.1 |
|
Default settings on MSA :This
register configures the default initialisation settings on MSA |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.2.3.1.3 |
.1.3.6.1.4.1.20044.53.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.53.9.3.1.1.3 |
rm10010CfgLabellineTable
table.1.3.6.1.4.1.20044.53.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.53.9.3.2.1.3 |
rm10010CfgOtxtlhTable
table.1.3.6.1.4.1.20044.53.9.4.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.4.1.1.1 |
|
Defaut Line output Power :This
register configures the start-up output power of the Line tranceiver (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.4.1.1.6 |
|
Default Line transceiver Tx Channel
:This register configures the start-up laser channel of the Line Tx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.4.1.1.7 |
|
Default Line transceiver Grid
:This register configures the start-up laser grid of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.4.1.1.8 |
|
Default Line TRX lowest Freq :This
register configures the start-up lowest frequency of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.4.1.1.9 |
|
Default Line transceiver Rx Channel
:This register configures the start-up laser channel of the Line Rx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.4.1.1.10 |
.1.3.6.1.4.1.20044.53.9.6.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010CfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010CfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.9.6.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.6.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.6.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.6.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.6.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.53.9.6.1.1.7 |
.1.3.6.1.4.1.20044.53.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonBytesCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonBytesCounterClientInputTable'
List of rm10010MonupRmonBytesCounterClientInput Article
Row definition for the rm10010MonupRmonBytesCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonBytesCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.16.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.16.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonCrcErrorsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonCrcErrorsCounterClientInputTable'
List of rm10010MonupRmonCrcErrorsCounterClientInput Article
Row definition for the rm10010MonupRmonCrcErrorsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonCrcErrorsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.32.1.1 |
||||
|
Client Input CRC Errors :This
counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.32.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.32.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.32.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonPacketsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonPacketsCounterClientInputTable'
List of rm10010MonupRmonPacketsCounterClientInput Article
Row definition for the rm10010MonupRmonPacketsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonPacketsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.48.1.1 |
||||
|
Client Input Packets :This counter
is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.48.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.48.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.64
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonBroadcastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonBroadcastCounterClientInputTable'
List of rm10010MonupRmonBroadcastCounterClientInput Article
Row definition for the rm10010MonupRmonBroadcastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonBroadcastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.64.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.64.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.64.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.64.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonMulticastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonMulticastCounterClientInputTable'
List of rm10010MonupRmonMulticastCounterClientInput Article
Row definition for the rm10010MonupRmonMulticastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonMulticastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.80.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.80.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.80.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.80.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.96
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonPauseFrameCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonPauseFrameCounterClientInputTable'
List of rm10010MonupRmonPauseFrameCounterClientInput Article
Row definition for the rm10010MonupRmonPauseFrameCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonPauseFrameCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.96.1.1 |
||||
|
Client Input Pause Frames :This
counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frames received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.96.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.96.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.96.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.160
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonUnicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonUnicastCounterClientInputTable'
List of rm10010MonupRmonUnicastCounterClientInput Article
Row definition for the rm10010MonupRmonUnicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonUnicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.160.1.1 |
||||
|
Client Input Unicast Packets :This
counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.160.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.160.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.160.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.176
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MonupRmonNonunicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MonupRmonNonunicastCounterClientInputTable'
List of rm10010MonupRmonNonunicastCounterClientInput Article
Row definition for the rm10010MonupRmonNonunicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MonupRmonNonunicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.176.1.1 |
||||
|
Client Input Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number of Non-Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.176.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.176.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.176.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.208
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonBytesCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonBytesCounterClientOutputTable'
List of rm10010MondownRmonBytesCounterClientOutput Article
Row definition for the rm10010MondownRmonBytesCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonBytesCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.208.1.1 |
||||
|
Client Output Bytes :This counter
is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.208.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.208.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.208.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.224
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonCrcErrorsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonCrcErrorsCounterClientOutputTable'
List of rm10010MondownRmonCrcErrorsCounterClientOutput Article
Row definition for the rm10010MondownRmonCrcErrorsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonCrcErrorsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.224.1.1 |
||||
|
Client Output CRC Errors :This
counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC Errors transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.224.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.224.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.224.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.240
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonPacketsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonPacketsCounterClientOutputTable'
List of rm10010MondownRmonPacketsCounterClientOutput Article
Row definition for the rm10010MondownRmonPacketsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonPacketsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.240.1.1 |
||||
|
Client Output Packets :This counter
is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.240.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.240.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.240.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.256
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonBroadcastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonBroadcastCounterClientOutputTable'
List of rm10010MondownRmonBroadcastCounterClientOutput Article
Row definition for the rm10010MondownRmonBroadcastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonBroadcastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.256.1.1 |
||||
|
Client Output Broadcast Packets
:This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number of Broadcast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.256.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.256.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.256.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.272
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonMulticastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonMulticastCounterClientOutputTable'
List of rm10010MondownRmonMulticastCounterClientOutput Article
Row definition for the rm10010MondownRmonMulticastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonMulticastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.272.1.1 |
||||
|
Client Output Multicast Packets
:This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number of Multicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.272.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.272.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.272.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.288
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonPauseFrameCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonPauseFrameCounterClientOutputTable'
List of rm10010MondownRmonPauseFrameCounterClientOutput Article
Row definition for the rm10010MondownRmonPauseFrameCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonPauseFrameCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.288.1.1 |
||||
|
Client Output Pause Frames :This
counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause frames transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.288.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.288.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.288.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.352
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonUnicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonUnicastCounterClientOutputTable'
List of rm10010MondownRmonUnicastCounterClientOutput Article
Row definition for the rm10010MondownRmonUnicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonUnicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.352.1.1 |
||||
|
Client Output Unicast Packets
:This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of Unicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.352.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.352.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.352.1.4 |
.1.3.6.1.4.1.20044.53.11.2.4.368
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010MondownRmonNonunicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010MondownRmonNonunicastCounterClientOutputTable'
List of rm10010MondownRmonNonunicastCounterClientOutput Article
Row definition for the rm10010MondownRmonNonunicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010MondownRmonNonunicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.2.4.368.1.1 |
||||
|
Client Output Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the number of Non-Unicast packets transmitted on the client … |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.2.4.368.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.368.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.2.4.368.1.4 |
.1.3.6.1.4.1.20044.53.11.6.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomInputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomInputClientCurrent15StatTable'
List of rm10010PerfTelecomInputClientCurrent15Stat Article
Row definition for the rm10010PerfTelecomInputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomInputClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.16.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.16.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.16.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.16.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.16.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.16.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.16.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.16.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.16.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.16.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.16.1.11 |
.1.3.6.1.4.1.20044.53.11.6.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomInputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomInputClientPast15StatHistoryPort1Table'
List of rm10010PerfTelecomInputClientPast15StatHistory Article
Row definition for the rm10010PerfTelecomInputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomInputClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.32.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.32.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.32.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.32.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.32.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.32.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.32.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.32.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.32.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.32.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.32.1.11 |
.1.3.6.1.4.1.20044.53.11.6.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomInputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomInputClientCurrent24StatTable'
List of rm10010PerfTelecomInputClientCurrent24Stat Article
Row definition for the rm10010PerfTelecomInputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomInputClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.48.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.48.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.48.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.48.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.48.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.48.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.48.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.48.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.48.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.48.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.48.1.11 |
.1.3.6.1.4.1.20044.53.11.6.64
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomInputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomInputClientPast24StatHistoryPort1Table'
List of rm10010PerfTelecomInputClientPast24StatHistory Article
Row definition for the rm10010PerfTelecomInputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomInputClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.64.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.64.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.64.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.64.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.64.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.64.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.64.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.64.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.64.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.64.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.64.1.11 |
.1.3.6.1.4.1.20044.53.11.6.80
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomOutputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomOutputClientCurrent15StatTable'
List of rm10010PerfTelecomOutputClientCurrent15Stat Article
Row definition for the rm10010PerfTelecomOutputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomOutputClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.80.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.80.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.80.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.80.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.80.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.80.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.80.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.80.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.80.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.80.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.80.1.11 |
.1.3.6.1.4.1.20044.53.11.6.96
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomOutputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomOutputClientPast15StatHistoryPort1Table'
List of rm10010PerfTelecomOutputClientPast15StatHistory Article
Row definition for the rm10010PerfTelecomOutputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomOutputClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.96.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.96.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.96.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.96.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.96.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.96.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.96.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.96.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.96.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.96.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.96.1.11 |
.1.3.6.1.4.1.20044.53.11.6.112
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomOutputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomOutputClientCurrent24StatTable'
List of rm10010PerfTelecomOutputClientCurrent24Stat Article
Row definition for the rm10010PerfTelecomOutputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomOutputClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.112.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.112.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.112.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.112.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.112.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.112.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.112.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.112.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.112.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.112.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.112.1.11 |
.1.3.6.1.4.1.20044.53.11.6.128
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomOutputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomOutputClientPast24StatHistoryPort1Table'
List of rm10010PerfTelecomOutputClientPast24StatHistory Article
Row definition for the rm10010PerfTelecomOutputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomOutputClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.128.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.128.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.128.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.128.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.128.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.128.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.128.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.128.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.128.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.128.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.6.128.1.11 |
.1.3.6.1.4.1.20044.53.11.6.432
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfDatacomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfDatacomClientCurrent15StatTable'
List of rm10010PerfDatacomClientCurrent15Stat Article
Row definition for the rm10010PerfDatacomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfDatacomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.432.1.1 |
||||
|
Client Current 15-min Input CRC
counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.432.1.4 |
||||
|
Client Current 15-min Input CRC
counter :This OID gives the current 15-min Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.432.1.5 |
||||
|
Client Current 15-min Input Packet
counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.432.1.6 |
||||
|
Client Current 15-min Input Packet
counter :This OID gives the current 15-min Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.432.1.7 |
||||
|
Client Current 15-min Output CRC
counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.432.1.28 |
||||
|
Client Current 15-min Output CRC
counter :This OID gives the current 15-min Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.432.1.29 |
||||
|
Client Current 15-min Output Packet
counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.432.1.30 |
||||
|
Client Current 15-min Output Packet
counter :This OID gives the current 15-min Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.432.1.31 |
.1.3.6.1.4.1.20044.53.11.6.448
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfDatacomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfDatacomClientPast15StatHistoryPort1Table'
List of rm10010PerfDatacomClientPast15StatHistory Article
Row definition for the rm10010PerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.448.1.1 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.448.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.448.1.5 |
||||
|
Client Past 15-min Input Packet
counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.448.1.6 |
||||
|
Client Past 15-min Input Packet
counter :This OID gives the past 15-min Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.448.1.7 |
||||
|
Client Past 15-min Output CRC
counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.448.1.28 |
||||
|
Client Past 15-min Output CRC
counter :This OID gives the past 15-min Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.448.1.29 |
||||
|
Client Past 15-min Output Packet
counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.448.1.30 |
||||
|
Client Past 15-min Output Packet
counter :This OID gives the past 15-min Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.448.1.31 |
.1.3.6.1.4.1.20044.53.11.6.464
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfDatacomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfDatacomClientCurrent24StatTable'
List of rm10010PerfDatacomClientCurrent24Stat Article
Row definition for the rm10010PerfDatacomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfDatacomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.464.1.1 |
||||
|
Client Current 24-hours Input
CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.464.1.4 |
||||
|
Client Current 24-hours Input
CRC counter :This OID gives the current 24-hours Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.464.1.5 |
||||
|
Client Current 24-hours Input
Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.464.1.6 |
||||
|
Client Current 24-hours Input
Packet counter :This OID gives the current 24-hours Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.464.1.7 |
||||
|
Client Current 24-hours Output
CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.464.1.28 |
||||
|
Client Current 24-hours Output
CRC counter :This OID gives the current 24-hours Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.464.1.29 |
||||
|
Client Current 24-hours Output
Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.464.1.30 |
||||
|
Client Current 24-hours Output
Packet counter :This OID gives the current 24-hours Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.464.1.31 |
.1.3.6.1.4.1.20044.53.11.6.480
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfDatacomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfDatacomClientPast24StatHistoryPort1Table'
List of rm10010PerfDatacomClientPast24StatHistory Article
Row definition for the rm10010PerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.6.480.1.1 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.480.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.480.1.5 |
||||
|
Client Past 24-hours Input Packet
counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.480.1.6 |
||||
|
Client Past 24-hours Input Packet
counter :This OID gives the past 24-hours Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.480.1.7 |
||||
|
Client Past 24-hours Output CRC
counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.480.1.28 |
||||
|
Client Past 24-hours Output CRC
counter :This OID gives the past 24-hours Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.480.1.29 |
||||
|
Client Past 24-hours Output Packet
counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.6.480.1.30 |
||||
|
Client Past 24-hours Output Packet
counter :This OID gives the past 24-hours Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.53.11.6.480.1.31 |
.1.3.6.1.4.1.20044.53.11.7.192
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomLinePostFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomLinePostFecCurrent15StatTable'
List of rm10010PerfTelecomLinePostFecCurrent15Stat Article
Row definition for the rm10010PerfTelecomLinePostFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomLinePostFecCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.192.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.192.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.192.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.192.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.192.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.192.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.192.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.192.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.192.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.192.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.192.1.11 |
.1.3.6.1.4.1.20044.53.11.7.193
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomLinePostFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomLinePostFecPast15StatHistoryPort1Table'
List of rm10010PerfTelecomLinePostFecPast15StatHistory Article
Row definition for the rm10010PerfTelecomLinePostFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomLinePostFecPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.193.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.193.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.193.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.193.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.193.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.193.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.193.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.193.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.193.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.193.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.193.1.11 |
.1.3.6.1.4.1.20044.53.11.7.194
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomLinePostFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomLinePostFecCurrent24StatTable'
List of rm10010PerfTelecomLinePostFecCurrent24Stat Article
Row definition for the rm10010PerfTelecomLinePostFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomLinePostFecCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.194.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.194.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.194.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.194.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.194.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.194.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.194.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.194.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.194.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.194.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.194.1.11 |
.1.3.6.1.4.1.20044.53.11.7.195
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomLinePostFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomLinePostFecPast24StatHistoryPort1Table'
List of rm10010PerfTelecomLinePostFecPast24StatHistory Article
Row definition for the rm10010PerfTelecomLinePostFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomLinePostFecPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.195.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.195.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.195.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.195.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.195.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.195.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.195.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.195.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.195.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.195.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.195.1.11 |
.1.3.6.1.4.1.20044.53.11.7.208
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomBerLinePreFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomBerLinePreFecCurrent15StatTable'
List of rm10010PerfTelecomBerLinePreFecCurrent15Stat Article
Row definition for the rm10010PerfTelecomBerLinePreFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomBerLinePreFecCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.208.1.1 |
||||
|
Current 15-min BER counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.208.1.2 |
||||
|
Current 15-min BER counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.208.1.3 |
||||
|
Current 15-min MinBER counter
inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.208.1.4 |
||||
|
Current 15-min MinBER counter
:This OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.208.1.5 |
||||
|
Current 15-min MaxBER counter
inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.208.1.6 |
||||
|
Current 15-min MaxBER counter
:This OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.208.1.7 |
.1.3.6.1.4.1.20044.53.11.7.209
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomBerLinePreFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomBerLinePreFecPast15StatHistoryPort1Table'
List of rm10010PerfTelecomBerLinePreFecPast15StatHistory Article
Row definition for the rm10010PerfTelecomBerLinePreFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomBerLinePreFecPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.209.1.1 |
||||
|
Previous 15-min BER counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.209.1.2 |
||||
|
Previous 15-min BER counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.209.1.3 |
||||
|
Previous 15-min MinBER counter
inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.209.1.4 |
||||
|
Previous 15-min MinBER counter
:This OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.209.1.5 |
||||
|
Previous 15-min MaxBER counter
inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.209.1.6 |
||||
|
Previous 15-min MaxBER counter
:This OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.209.1.7 |
.1.3.6.1.4.1.20044.53.11.7.210
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomBerLinePreFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomBerLinePreFecCurrent24StatTable'
List of rm10010PerfTelecomBerLinePreFecCurrent24Stat Article
Row definition for the rm10010PerfTelecomBerLinePreFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomBerLinePreFecCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.210.1.1 |
||||
|
Current 24-hours BER counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.210.1.2 |
||||
|
Current 24-hours BER counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.210.1.3 |
||||
|
Current 24-hoursMinBER counter
inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.210.1.4 |
||||
|
Current 24-hours MinBER counter
:This OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.210.1.5 |
||||
|
Current 24-hours MaxBER counter
inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.210.1.6 |
||||
|
Current 24-hours MaxBER counter
:This OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.210.1.7 |
.1.3.6.1.4.1.20044.53.11.7.211
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk rm10010PerfTelecomBerLinePreFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Rm10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Rm10010-MIB::rm10010PerfTelecomBerLinePreFecPast24StatHistoryPort1Table'
List of rm10010PerfTelecomBerLinePreFecPast24StatHistory Article
Row definition for the rm10010PerfTelecomBerLinePreFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the rm10010PerfTelecomBerLinePreFecPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.53.11.7.211.1.1 |
||||
|
Previous 24-hours BER counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.211.1.2 |
||||
|
Previous 24-hours BER counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.211.1.3 |
||||
|
Previous 24-hours MinBER counter
inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.211.1.4 |
||||
|
Previous 24-hours MinBER counter
:This OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.211.1.5 |
||||
|
Previous 24-hours MaxBER counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.53.11.7.211.1.6 |
||||
|
Previous 24-hours MaxBER counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.53.11.7.211.1.7 |