EKINOPS-Pmops2d-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
43

pmops2dAlmclientComAlarmTable

table
.1.3.6.1.4.1.20044.71.2.2.2.24 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dAlmclientComAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dAlmclientComAlarmTable' 
List of pmops2dAlmclientComAlarm 
Article
pmops2dAlmclientComAlarmEntry row .1.3.6.1.4.1.20044.71.2.2.2.24.1
Row definition for the pmops2dAlmclientComAlarm
table
Indexes
Column Syntax OID
pmops2dAlmclientComAlarmIndex
Index definition for the pmops2dAlmclientComAlarm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.2.2.2.24.1.1
pmops2dAlmClientComSwitchFailPortn
Switch Fail :This OID indicates
the OPS A switch component in in
fail condition <Help> This alarm
indicates if the OPS switch is
in fail condition <Condtype> CLIENT_COM_SWITCH_FAIL
<Probcause> equipmentMalfunctio…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.2.2.24.1.9

pmops2dAlmsynthClientAlmTable

table
.1.3.6.1.4.1.20044.71.2.2.3.8 · 1 row entry · 3 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dAlmsynthClientAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dAlmsynthClientAlmTable' 
List of pmops2dAlmsynthClientAlm 
Article
pmops2dAlmsynthClientAlmEntry row .1.3.6.1.4.1.20044.71.2.2.3.8.1
Row definition for the pmops2dAlmsynthClientAlm
table
Indexes
Column Syntax OID
pmops2dAlmsynthClientAlmIndex
Index definition for the pmops2dAlmsynthClientAlm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.2.2.3.8.1.1
pmops2dAlmClientHwFailAccPortn
HW_Fail_Acc :This OID indicates
a client hardware failure on the
OPS <Help> This alarm indicates
if a client HW fail access Alarm
has been detected on the OPS <Condtype>
CLIENT_HW_FAIL_ACC <Probcause>
equipmentM…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.2.3.8.1.5
pmops2dAlmClientFailAccPortn
Client_Acc_Fail :This OID indicates
a client failure on the OPS <Help>
This alarm indicates if a client
fail access Alarm has been detected
on the OPS <Condtype> CLIENT_FAIL_ACC
<Probcause> equipmentMalfunction
…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.2.3.8.1.13

pmops2dAlmlineMeasWngTable

table
.1.3.6.1.4.1.20044.71.2.3.1.48 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dAlmlineMeasWngTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dAlmlineMeasWngTable' 
List of pmops2dAlmlineMeasWng
Article
pmops2dAlmlineMeasWngEntry row .1.3.6.1.4.1.20044.71.2.3.1.48.1
Row definition for the pmops2dAlmlineMeasWng
table
Indexes
Column Syntax OID
pmops2dAlmlineMeasWngIndex
Index definition for the pmops2dAlmlineMeasWng
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.2.3.1.48.1.1
pmops2dAlmLineTxPwrLowWngPortn
Tx Low Warning :This OID indicates
that Transmit power or the OPS
is lower than the warning threshold
of the OPS <Help> This warning
indicates if the receive power
on the transmit side of the OPS
is too low <Con…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.1.48.1.2
pmops2dAlmLineTxPwrHighWngPortn
Tx High Warning : This OID indicates
that Transmit power or the OPS
is higher than the warning threshold
of the OPS <Help> This warning
indicates if the receive power
on the transmit side of the OPS
is too high …
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.1.48.1.3
pmops2dAlmLineRxPwrLowWngPortn
Rx Low Warning :This OID indicates
that Receive power or the OPS is
lower than the warning threshold
of the OPS <Help> This warning
indicates if the receive power
on the receive side of the OPS
is too low <Condt…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.1.48.1.4
pmops2dAlmLineRxPwrHighWngPortn
Rx High Warning : This OID indicates
that Receive power or the OPS is
higher than the warning threshold
of the OPS <Help> This warning
indicates if the receive power
on the receive side of the OPS
is too high <C…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.1.48.1.5

pmops2dAlmlineAlarmTable

table
.1.3.6.1.4.1.20044.71.2.3.2.32 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dAlmlineAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dAlmlineAlarmTable' 
List of pmops2dAlmlineAlarm Article
pmops2dAlmlineAlarmEntry row .1.3.6.1.4.1.20044.71.2.3.2.32.1
Row definition for the pmops2dAlmlineAlarm
table
Indexes
Column Syntax OID
pmops2dAlmlineAlarmIndex
Index definition for the pmops2dAlmlineAlarm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.2.3.2.32.1.1
pmops2dAlmLosRxPortn
RX Loss Of Signal :This OID indicates
that a LOS is detected on the Receive
1 of the OPS <Help> This alarm
indicates if an optical signal
is detected on the RX of the OPS
<Condtype> LOS_RX <Probcause>
receiveFa…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.32.1.2
pmops2dAlmLosTxPortn
TX Loss Of Signal :This OID indicates
that a LOS is detected on the Transmit
of the OPS <Help> This alarm
indicates if an optical signal
is detected on the TX of the OPS
<Condtype> LOS_TX <Probcause> transmitFail…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.32.1.4
pmops2dAlmSwitchPositionOnePortn
RX1 Selected :This OID indicates
the OPS selects the RX 1 input
<Help> This status indicates
if the RX 1 input is selected on
the OPS <Condtype> SWITCH_POSITION_ONE
<Probcause> other (1) <Alarmtype>
other (1) <P…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.32.1.6
pmops2dAlmSwitchPositionTwoPortn
RX2 Selected :This OID indicates
the OPS selects the RX 2 input
<Help> This status indicates
if the RX2 input is selected on
the OPS <Condtype> SWITCH_POSITION_TWO
<Probcause> other (1) <Alarmtype>
other (1) <Po…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.32.1.7

pmops2dAlmlineMeasAlaTable

table
.1.3.6.1.4.1.20044.71.2.3.2.40 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dAlmlineMeasAlaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dAlmlineMeasAlaTable' 
List of pmops2dAlmlineMeasAla
Article
pmops2dAlmlineMeasAlaEntry row .1.3.6.1.4.1.20044.71.2.3.2.40.1
Row definition for the pmops2dAlmlineMeasAla
table
Indexes
Column Syntax OID
pmops2dAlmlineMeasAlaIndex
Index definition for the pmops2dAlmlineMeasAla
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.2.3.2.40.1.1
pmops2dAlmLineTxPwrLowAlaPortn
Tx Low Alarm :This OID indicates
that Transmit power or the OPS
is lower than the alarm threshold
of the OPS <Help> This alarm
indicates if the receive power
on the transmit side of the OPS
is too low <Condtype>…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.40.1.2
pmops2dAlmLineTxPwrHighAlaPortn
Tx High Alarm : This OID indicates
that Transmit power or the OPS
is higher than the alarm threshold
of the OPS <Help> This alarm
indicates if the receive power
on the transmit side of the OPS
is too high <Condt…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.40.1.3
pmops2dAlmLineRxPwrLowAlaPortn
Rx Low Alarm :This OID indicates
that Receive power or the OPS is
lower than the alarm threshold
of the OPS <Help> This alarm
indicates if the receive power
on the receive side of the OPS
is too low <Condtype> L…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.40.1.4
pmops2dAlmLineRxPwrHighAlaPortn
Rx High Alarm : This OID indicates
that Receive power of the OPS is
higher than the alarm threshold
of the OPS <Help> This alarm
indicates if the receive power
on the receive side of the OPS
is too high <Condtyp…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.2.40.1.5

pmops2dAlmsynthLineAlmTable

table
.1.3.6.1.4.1.20044.71.2.3.3.16 · 1 row entry · 5 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dAlmsynthLineAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dAlmsynthLineAlmTable' 
List of pmops2dAlmsynthLineAlm 
Article
pmops2dAlmsynthLineAlmEntry row .1.3.6.1.4.1.20044.71.2.3.3.16.1
Row definition for the pmops2dAlmsynthLineAlm
table
Indexes
Column Syntax OID
pmops2dAlmsynthLineAlmIndex
Index definition for the pmops2dAlmsynthLineAlm
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.2.3.3.16.1.1
pmops2dAlmLineHwFailAccPortn
HW_Fail_Acc :This OID indicates
a line hardware failure on the
OPS <Help> This alarm indicates
if a line HW fail access Alarm
has been detected on the OPS <Condtype>
LINE_HW_FAIL_ACC <Probcause> equipmentMalfunct…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.3.16.1.5
pmops2dAlmLineMeasWngPortn
Measure Warning :This OID indicates
a line warning is present coming
out of OPS diagnostic monitoring
<Help> This alarm indicates if
a line diagnostic monitoring Warning
has been detected on the OPS <Condtype>
…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.3.16.1.10
pmops2dAlmLineMeasAlmPortn
Measure Alarm :This OID indicates
an line alarm is present coming
out of OPS diagnostic monitoring
<Help> This alarm indicates if
a line diagnostic monitoring Alarm
has been detected on the OPS <Condtype>
LINE_M…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.3.16.1.11
pmops2dAlmLineFailAccPortn
Line_Acc_Fail :This OID indicates
a line failure on the OPS <Help>
This alarm indicates if a line
fail access Alarm has been detected
on the OPS <Condtype> LINE_FAIL_ACC
<Probcause> equipmentMalfunction
(16) <Al…
EKINOPS-MIBEkiOnOff
Type Values:
1off
2on
 .1.3.6.1.4.1.20044.71.2.3.3.16.1.13

pmops2dMesrtxPowerTable

table
.1.3.6.1.4.1.20044.71.3.3.16 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dMesrtxPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dMesrtxPowerTable' 
List of pmops2dMesrtxPower Article
pmops2dMesrtxPowerEntry row .1.3.6.1.4.1.20044.71.3.3.16.1
Row definition for the pmops2dMesrtxPower
table
Indexes
Column Syntax OID
pmops2dMesrtxPowerIndex
Index definition for the pmops2dMesrtxPower
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.3.3.16.1.1
pmops2dMesrtxPowerPortn
TX Power :This OID gives the transmit
power value of the signal , read
on the coupler output (Power=(AV-32768)*0.005)
(Unit = dBm) <Help> This measure
gives the Transmit optical power
on the TX of the OPS
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.71.3.3.16.1.2

pmops2dMesrrxPowerTable

table
.1.3.6.1.4.1.20044.71.3.3.24 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dMesrrxPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dMesrrxPowerTable' 
List of pmops2dMesrrxPower Article
pmops2dMesrrxPowerEntry row .1.3.6.1.4.1.20044.71.3.3.24.1
Row definition for the pmops2dMesrrxPower
table
Indexes
Column Syntax OID
pmops2dMesrrxPowerIndex
Index definition for the pmops2dMesrrxPower
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.3.3.24.1.1
pmops2dMesrrxPowerPortn
RX Power :This OID gives the receive
power value of the signal , read
on the switch input (Power=(AV-32768)*0.005)
(Unit = dBm) <Help> This measure
gives the Receive optical power
on the RX of the OPS
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.20044.71.3.3.24.1.2

pmops2dRinvSfpTable

table
.1.3.6.1.4.1.20044.71.7.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dRinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dRinvSfpTable' 
List of the clients on the selected module
pmops2dRinvSfpEntry row .1.3.6.1.4.1.20044.71.7.1.1.1
Row definition for the client table
Indexes
Column Syntax OID
pmops2dRinvSfpIndex
Index for Sfp table
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.20044.71.7.1.1.1.1
pmops2dRinvSfp
Inventory for the Clients: This OID contains the inventory for the clients
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.71.7.1.1.1.2

pmops2dRinvLineTable

table
.1.3.6.1.4.1.20044.71.7.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dRinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dRinvLineTable' 
List of the lines on the selected module
pmops2dRinvLineEntry row .1.3.6.1.4.1.20044.71.7.1.2.1
Row definition for the line table
Indexes
Column Syntax OID
pmops2dRinvLineIndex
Index for line table
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.20044.71.7.1.2.1.1
pmops2dRinvLine
Inventory for the lines: This OID contains the inventory for the lines
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.71.7.1.2.1.2

pmops2dCfgClientcaiscsfTable

table
.1.3.6.1.4.1.20044.71.9.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dCfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dCfgClientcaiscsfTable' 
List of  Article
pmops2dCfgClientcaiscsfEntry row .1.3.6.1.4.1.20044.71.9.1.1.1
Row definition for the accessCAisCsf
table
Indexes
Column Syntax OID
pmops2dCfgClientcaiscsfIndex
Index definition for the clientcaiscsf
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.9.1.1.1.1
pmops2dCfgReservedPortn
:
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.71.9.1.1.1.3

pmops2dCfgClientStartupTable

table
.1.3.6.1.4.1.20044.71.9.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dCfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dCfgClientStartupTable' 
List of  Article
pmops2dCfgClientStartupEntry row .1.3.6.1.4.1.20044.71.9.2.1.1
Row definition for the startUp
table
Indexes
Column Syntax OID
pmops2dCfgClientStartupIndex
Index definition for the clientStartup
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.9.2.1.1.1
pmops2dCfgClientSwitchModePortn
Default setting on OPS switch
:This register configures the
default switch mode
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.71.9.2.1.1.3

pmops2dCfgLineStartupThreshTable

table
.1.3.6.1.4.1.20044.71.9.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dCfgLineStartupThreshTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dCfgLineStartupThreshTable' 
List of  Article
pmops2dCfgLineStartupThreshEntry row .1.3.6.1.4.1.20044.71.9.2.2.1
Row definition for the startUp
table
Indexes
Column Syntax OID
pmops2dCfgLineStartupThreshIndex
Index definition for the lineStartupThresh
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.9.2.2.1.1
pmops2dCfgLineRxPwrSettingPortn
Default setting on OPS Rx Pwr
:This register configures the
default RX1 Loss threshold on
the OPS B (Unit = dBm)
Unsigned32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.20044.71.9.2.2.1.4

pmops2dCfgLabelclientTable

table
.1.3.6.1.4.1.20044.71.9.4.1 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dCfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dCfgLabelclientTable' 
List of  Article
pmops2dCfgLabelclientEntry row .1.3.6.1.4.1.20044.71.9.4.1.1
Row definition for the labels
table
Indexes
Column Syntax OID
pmops2dCfgLabelclientIndex
Index definition for the labelclient
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.9.4.1.1.1
pmops2dCfgLabelclientPortn
Default settings on the label
of the clients :These registers
configures the default initialisation
settings of the labels of the ports.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.71.9.4.1.1.3

pmops2dCfgLabellineTable

table
.1.3.6.1.4.1.20044.71.9.4.2 · 1 row entry · 2 columns
Open in standard view
Uses the ekinops variant from /opt/observium/mibs/ekinops.
Command help
Walk pmops2dCfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmops2d-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmops2d-MIB::pmops2dCfgLabellineTable' 
List of  Article
pmops2dCfgLabellineEntry row .1.3.6.1.4.1.20044.71.9.4.2.1
Row definition for the labels
table
Indexes
Column Syntax OID
pmops2dCfgLabellineIndex
Index definition for the labelline
table
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.20044.71.9.4.2.1.1
pmops2dCfgLabellinePortn
Default settings on the label
of the lines :These registers
configures the default initialisation
settings of the labels of the lines.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.20044.71.9.4.2.1.3