EKINOPS-Pmo10010-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
99
Rows
99
Columns
436
.1.3.6.1.4.1.20044.76.2.2.1.56
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmclientNetworkLaneAlarmWarningTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmclientNetworkLaneAlarmWarningTable'
List of pmo10010AlmclientNetworkLaneAlarmWarning Article
Row definition for the pmo10010AlmclientNetworkLaneAlarmWarning
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmclientNetworkLaneAlarmWarning
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.2.1.56.1.1 |
||||
|
Client Trscv Rx Power Low Alarm
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.2 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.3 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.4 |
||||
|
Client Trscv Rx Power High Alarm
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.5 |
||||
|
Client Trscv Laser Temp Low Alarm
:This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Laser Temperature is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.6 |
||||
|
Client Trscv Laser Temp Low Warning
:This OID indicates that the Trscv Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Laser Temperature is … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.7 |
||||
|
Client Trscv Laser Temp High Warning
:This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Laser Temperature i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.8 |
||||
|
Client Trscv Laser Temp High Alarm
:This OID indicates that the Trscv Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Laser Temperature is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.9 |
||||
|
Client Trscv Tx Power Low Alarm
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is lower than the t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.10 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.11 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.12 |
||||
|
Client Trscv Tx Power High Alarm
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is higher than th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.13 |
||||
|
Client Trscv Bias Low Alarm :This
OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.14 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.15 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.16 |
||||
|
Client Trscv Bias High Alarm :This
OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.56.1.17 |
.1.3.6.1.4.1.20044.76.2.2.1.232
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmclientSfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmclientSfpWarnDdmTable'
List of pmo10010AlmclientSfpWarnDdm Article
Row definition for the pmo10010AlmclientSfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmclientSfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.2.1.232.1.1 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.2 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.3 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.4 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.5 |
||||
|
Client Trscv Power Supply Low
Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.6 |
||||
|
Client Trscv Power Supply High
Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.7 |
||||
|
Client Trscv Temp Low Warning
:This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.8 |
||||
|
Client Trscv Temp High Warning
:This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.9 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.16 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.1.232.1.17 |
.1.3.6.1.4.1.20044.76.2.2.2.72
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmclientNetworkLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmclientNetworkLaneFaultTable'
List of pmo10010AlmclientNetworkLaneFault Article
Row definition for the pmo10010AlmclientNetworkLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmclientNetworkLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.2.2.72.1.1 |
||||
|
Client Network Lane Rx FIFO Error
:This OID indicates a Rx FIFO Error on the Client Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_FIFO_ERROR … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.4 |
||||
|
Client Network Lane Rx Loss Of
Lock :This OID indicates a Rx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_LOL <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.5 |
||||
|
Client Network Lane Rx Loss Of
Signal :This OID indicates a Rx Loss of Signal on the Client Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the Client Trscv Network Lane <Condtype> CLIENT_LANE_RX_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.6 |
||||
|
Client Network Lane Tx Loss Of
Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_TX_LOL <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.8 |
||||
|
Client Network Lane Tx Loss Of
Signal Functionality :This OID indicates a Tx Loss of Signal Functionality on the Client Trscv Network Lane <Help> Alarm indicating a Tx Loss of Signal Functionality on the Client Tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.9 |
||||
|
Client Network Lane APD Power
Supply :This OID indicates an APD Power supply failure on the Client Trscv Network Lane <Help> Alarm indicating an APD Power supply failure on the Client Trscv Network Lane <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.15 |
||||
|
Client Network Lane Wavelength
Unlock :This OID indicates a Wavelength unlock on the Client Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the Client Trscv Network Lane <Condtype> CLIENT_LANE_WAV… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.16 |
||||
|
Client Network Lane TEC Fault
:This OID indicates a TEC Fault on the Client Trscv Network Lane <Help> Alarm indicating a TEC Fault on the Client Trscv Network Lane <Condtype> CLIENT_LANE_TEC_FAULT <Probcause> tran… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.72.1.17 |
.1.3.6.1.4.1.20044.76.2.2.2.88
·
1 row entry
·
14 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmclientHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmclientHostLaneFaultTable'
List of pmo10010AlmclientHostLaneFault Article
Row definition for the pmo10010AlmclientHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmclientHostLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.2.2.88.1.1 |
||||
|
Client Rx Frame Alignment Loss
:This OID indicates the module is not aligned with the Rx incoming Client signal <Help> Alarm indicating the module is not aligned with the incoming client signal <Condtype> CLIENT_R… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Client Trscv <Condtype> CLIENT_INPUT_LOSS_OF_SIG <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.3 |
||||
|
Client Lanes Marker Unlock :This
OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not lock <Condtype> CLIENT_LANES_MARKER_UNLOCK <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.4 |
||||
|
Client Lanes 64/66b Unlock :This
OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> CLIENT_LANES_64_66_UNLOCK <Probcause> receiveFailure (41… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.5 |
||||
|
Client Lanes Not Aligned :This
OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_NOT_ALIGNED <Probcause> receiveFailure (41) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.6 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.7 |
||||
|
Client Host Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Host Lane <Condtype> CLIENT_TX_HOST_LOL <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.10 |
||||
|
Client Host Lane Tx FIFO Error
:This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Host Lane <Condtype> CLIENT_LANE_TX_FIFO_ERROR <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.11 |
||||
|
Rx Local Fault Signal Detected
:This OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is detected on the client input port <Condtype> RX_LOCAL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.12 |
||||
|
Rx Remote Fault Signal Detected
:This OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is detected on the client input port <Condtype> RX_RE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.13 |
||||
|
Tx Local Fault Signal Detected
:This OID indicates a Local Fault Signal is coming on the client port from the line side<Help> This alarm indicates a Local Fault Signal is coming on the client input port from the l… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.14 |
||||
|
Tx Remote Fault Signal Detected
:This OID indicates a Remote Fault Signal is coming on the client port from the line side<Help> This alarm indicates a Remote Fault Signal is coming on the client input port from th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.15 |
||||
|
Client Tx Frame Alignment Loss
:This OID indicates the module is not aligned with the Tx incoming Client signal<Help> Alarm indicating the module is not aligned with the incoming client signal from the line side <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.88.1.16 |
.1.3.6.1.4.1.20044.76.2.2.2.200
·
1 row entry
·
15 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmclientOtnAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmclientOtnAlmTable'
List of pmo10010AlmclientOtnAlm Article
Row definition for the pmo10010AlmclientOtnAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmclientOtnAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.2.2.200.1.1 |
||||
|
OTU2e_DLOM :This OID indicates
that a Loss Of Multiframe has been detected on client port<Help> This alarm indicates if a Loss Of Multiframe has been detected on the client port <Condtype> CLIENT_OTU2E_DLOM <Prob… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.2 |
||||
|
OTU2e_DLOF :This OID indicates
the module is not aligned with the incoming Line signal<Help> Alarm indicating the module is not aligned with the incoming client signal <Condtype> CLIENT_OTU2E_DLOF <Probcause> rece… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.3 |
||||
|
ODU2e DPLM :This OID indicates
a Payload Mismatch is detected on the Client port<Help> Alarm indicating a Payload Mismatch <Condtype> CLIENT_ODU2E_DPLM <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.4 |
||||
|
ODU2e DDEG :This OID indicates
that a Signal Degrade has been detected on client port<Help> Alarm indicating a Signal Degrade upon threshold and confirmation parameters <Condtype> CLIENT_ODU2E_DDEG <Probcause> deg… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.6 |
||||
|
ETH DCSF :This OID indicates that
a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line frame for this cli… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.7 |
||||
|
ODU2e IAIS :This OID indicates
that an Alarm Indication Signal has been inserted on client port <Help> This alarm indicates if an Alarm Indication Signal has been inserted on the client port <Condtype> CLIENT_ODU… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.8 |
||||
|
ODU2e DTIM :This OID indicates
that a Trace Identifier Mismatch has been detected on client port<Help> This alarm indicates if an Trace Identifier Mismatch has been detected on the client port <Condtype> CLIENT_OD… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.9 |
||||
|
ODU2e DAIS :This OID indicates
that a Alarm Indication SIgnal has been detected on client port<Help> This alarm indicates if an Alarm Indication Signal has been detected on the client port <Condtype> CLIENT_ODU2E_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.10 |
||||
|
ODU2e IOCI :This OID indicates
that an Open Connection has been inserted on client port <Help> This alarm indicates if an Open Connection Indication has been inserted on the client port <Condtype> CLIENT_ODU2E_IO… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.12 |
||||
|
ODU2e DOCI :This OID indicates
that a Open Connection has been detected on client port <Help> This alarm indicates if an Open Connection Indication has been detected on the client port <Condtype> CLIENT_ODU2E_DOC… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.13 |
||||
|
ODU2e IBDI :This OID indicates
that a Backward Defect Indication has been inserted on client port <Help> This alarm indicates if a Backward Defect Indication has been inserted on the client port <Condtype> CLIENT… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.14 |
||||
|
ODU2e DBDI :This OID indicates
that a Backward Defect Indication has been detected on client port<Help> This alarm indicates if a Backward Defect Indication has been detected on the client port <Condtype> CLIENT_O… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.15 |
||||
|
ODU2e ILCK :This OID indicates
that a Locked Indication has been inserted on client port <Help> This alarm indicates if a Locked Indication has been inserted on the client port <Condtype> CLIENT_ODU2E_ILCK <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.16 |
||||
|
ODU2e DLCK :This OID indicates
that a Locked Indication has been detected on client port <Help> This alarm indicates if a Locked Indication has been detected on the client port <Condtype> CLIENT_ODU2E_DLCK <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.200.1.17 |
.1.3.6.1.4.1.20044.76.2.2.2.216
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmclientSfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmclientSfpAlmDdmTable'
List of pmo10010AlmclientSfpAlmDdm Article
Row definition for the pmo10010AlmclientSfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmclientSfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.2.2.216.1.1 |
||||
|
Client Trscv Tx Power Low :This
OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is lower … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.2 |
||||
|
Client Trscv Tx Power High :This
OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is high… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.3 |
||||
|
Client Trscv Bias Low :This OID
indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.4 |
||||
|
Client Trscv Bias High :This OID
indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.5 |
||||
|
Client Trscv Power Supply Low
:This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is lo… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.6 |
||||
|
Client Trscv Power Supply High
:This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.7 |
||||
|
Client Trscv Temp Low :This OID
indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.8 |
||||
|
Client Trscv Temp High :This OID
indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.9 |
||||
|
Client Trscv Rx Power Low :This
OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.16 |
||||
|
Client Trscv Rx Power High :This
OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.2.216.1.17 |
.1.3.6.1.4.1.20044.76.2.2.3.8
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmsynthAlmPortTable'
List of pmo10010AlmsynthAlmPort Article
Row definition for the pmo10010AlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.2.3.8.1.1 |
||||
|
Client Optical Module Absent :This
OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver is not plugged <Condtype> SFP_ABSENT_1 <Probcause> inp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.2 |
||||
|
DDM Supported On Client Trscv
:This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feature <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.5 |
||||
|
Client Trscv Laser Shutdown :This
OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdown <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.7 |
||||
|
Remote Client Port In Service
:This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE_O… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.9 |
||||
|
Warning On Client Trscv DDM :This
OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> SFP_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.10 |
||||
|
Alarm On Client Trscv DDM :This
OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> SFP_DDM_AL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.13 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client po… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.76.2.3.1.104
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmlineNetworkLaneAlarmWarning1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmlineNetworkLaneAlarmWarning1Table'
List of pmo10010AlmlineNetworkLaneAlarmWarning1 Article
Row definition for the pmo10010AlmlineNetworkLaneAlarmWarning1
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmlineNetworkLaneAlarmWarning1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.1.104.1.1 |
||||
|
Line Trscv Rx Power Low Alarm
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is lower than the thres… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.2 |
||||
|
Line Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.3 |
||||
|
Line Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.4 |
||||
|
Line Trscv Rx Power High Alarm
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is higher than the th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.5 |
||||
|
Line Trscv Tx Laser Temp Low Alarm
:This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperature … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.6 |
||||
|
Line Trscv Tx Laser Temp Low Warning
:This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temperat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.7 |
||||
|
Line Trscv Tx Laser Temp High
Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temper… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.8 |
||||
|
Line Trscv Tx Laser Temp High
Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperatur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.9 |
||||
|
Line Trscv Tx Power Low Alarm
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.10 |
||||
|
Line Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.11 |
||||
|
Line Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.12 |
||||
|
Line Trscv Tx Power High Alarm
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.13 |
||||
|
Line Trscv Tx Bias Low Alarm :This
OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is lower t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.14 |
||||
|
Line Trscv Tx Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is low… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.15 |
||||
|
Line Trscv Tx Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is h… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.16 |
||||
|
Line Trscv Tx Bias High Alarm
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is highe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.104.1.17 |
.1.3.6.1.4.1.20044.76.2.3.1.120
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmlineNetworkLaneAlarmWarning2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmlineNetworkLaneAlarmWarning2Table'
List of pmo10010AlmlineNetworkLaneAlarmWarning2 Article
Row definition for the pmo10010AlmlineNetworkLaneAlarmWarning2
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmlineNetworkLaneAlarmWarning2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.1.120.1.1 |
||||
|
Line Trscv Tx Modulator Bias Low
Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulator… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.2 |
||||
|
Line Trscv Tx Modulator Bias Low
Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx modul… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.3 |
||||
|
Line Trscv Tx Modulator Bias High
Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx mod… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.4 |
||||
|
Line Trscv Tx Modulator Bias High
Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.5 |
||||
|
Line Trscv Rx Laser Temp Low Alarm
:This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperature … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.6 |
||||
|
Line Trscv Rx Laser Temp Low Warning
:This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temperat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.7 |
||||
|
Line Trscv Rx Laser Temp High
Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temper… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.8 |
||||
|
Line Trscv Rx Laser Temp High
Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperatur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.9 |
||||
|
Line Trscv Rx Output Power Low
Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is lower… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.10 |
||||
|
Line Trscv Rx Output Power Low
Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is l… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.11 |
||||
|
Line Trscv Rx Output Power High
Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.12 |
||||
|
Line Trscv Rx Output Power High
Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is hig… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.13 |
||||
|
Line Trscv Rx Bias Low Alarm :This
OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is l… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.14 |
||||
|
Line Trscv Rx Bias Low Warning
:This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias current … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.15 |
||||
|
Line Trscv Rx Bias High Warning
:This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias curren… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.16 |
||||
|
Line Trscv Rx Bias High Alarm
:This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.1.120.1.17 |
.1.3.6.1.4.1.20044.76.2.3.2.136
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmlineNetworkLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmlineNetworkLaneFaultTable'
List of pmo10010AlmlineNetworkLaneFault Article
Row definition for the pmo10010AlmlineNetworkLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmlineNetworkLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.2.136.1.1 |
||||
|
Line Network Lane Rx TEC Fault
:This OID indicates a Rx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Rx TEC Fault on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_TEC_FAULT <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.3 |
||||
|
Line Network Lane Rx FIFO Error
:This OID indicates a Rx FIFO Error on the Line Trscv Network Lane <Help> Alarm indicating a Rx FIFO Error on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_FIFO_ERROR <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.4 |
||||
|
Line Network Lane Rx Loss Of Lock
:This OID indicates a Rx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Lock on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_LOL <Probcaus… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.5 |
||||
|
Line Network Lane Rx Loss Of Signal
:This OID indicates a Rx Loss of Signal on the Line Trscv Network Lane <Help> Alarm indicating a Rx Loss of Signal on the Line Trscv Network Lane <Condtype> LINE_LANE_RX_LOS <Pr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.6 |
||||
|
Line Network Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Network Lane <Condtype> LINE_LANE_TX_LOL <Probcaus… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.8 |
||||
|
Line Network Lane Tx Loss Of Signal
Functionality :This OID indicates a Tx Loss of Signal Functionality on the Line Trscv Network Lane <Help> Alarm indicating a Tx Loss of Signal Functionality on the Line Trscv Ne… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.9 |
||||
|
Line Network Lane APD Power Supply
:This OID indicates an APD Power supply failure on the Line Trscv Network Lane <Help> Alarm indicating an APD Power supply failure on the Line Trscv Network Lane <Condtype> LINE_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.15 |
||||
|
Line Network Lane Wavelength Unlock
:This OID indicates a Wavelength unlock on the Line Trscv Network Lane <Help> Alarm indicating a Wavelength unlock on the Line Trscv Network Lane <Condtype> LINE_LANE_WAVELENGTH… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.16 |
||||
|
Line Network Lane TEC Fault :This
OID indicates a Tx TEC Fault on the Line Trscv Network Lane <Help> Alarm indicating a Tx TEC Fault on the Line Trscv Network Lane <Condtype> LINE_LANE_TEC_FAULT <Probcause> transm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.136.1.17 |
.1.3.6.1.4.1.20044.76.2.3.2.152
·
1 row entry
·
14 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmlineOtu4AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmlineOtu4AlarmTable'
List of pmo10010AlmlineOtu4Alarm Article
Row definition for the pmo10010AlmlineOtu4Alarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmlineOtu4Alarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.2.152.1.1 |
||||
|
OPS4 DLOS-P :This OID indicates
a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line Trscv <Condtype> LINE_INPUT_LOSS_OF_SIGNAL <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.2 |
||||
|
OTU4 - DLOF :This OID indicates
the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incoming Line signal <Condtype> LINE_LOSS_OF_FRAME <Probcause> rec… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.3 |
||||
|
OTU4 IBDI :This OID indicates
a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal <Condtype> LIN… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.4 |
||||
|
OTU4 DBDI :This OID indicates
a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal <Condtype> LINE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.5 |
||||
|
Line SM IAE Inserted :This OID
indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment Error is inserted on the outgoing Line signal <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.6 |
||||
|
Line SM IAE Detected :This OID
indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment Error is detected on the incoming Line signal <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.7 |
||||
|
OTU4 DDEG :This OID indicates
that a Signal Degrade has been detected on line port <Help> This alarm indicates if a Signal Degrade has been detected upon threshold and confirmation parameters on the line port <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.8 |
||||
|
OTU4 DTIM :This OID indicates
that a Trace Identifier Mismatch has been detected on line port <Help> This alarm indicates if a Trace Identifier Mismatch has been detected on the line port <Condtype> CLIENT_OTU4_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.9 |
||||
|
Line Host Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Host Lane <Condtype> LINE_TX_HOST_LOL <Probcause> receiv… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.10 |
||||
|
Line Host Lane Tx FIFO Error :This
OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lane <Condtype> LINE_LANE_TX_FIFO_ERROR <Probcause> recei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.11 |
||||
|
Ochr4 - DLOS-P :This OID indicates
that a Transmitter failure has been detected on line port <Help> This alarm indicates if a Transmitter Failure has been detected on the line port <Condtype> LINE_OCHR4_DLOS_P <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.12 |
||||
|
OTU4 DSSF :This OID indicates
that a Server Signal failure has been detected on line port <Help> This alarm indicates if a Server Signal Failure has been detected on the line port <Condtype> LINE_OTU4_DSSF <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.16 |
||||
|
OTU4 DLOM :This OID indicates
that a Loss Of Multiframe has been detected on line port <Help> This alarm indicates if a Loss Of Multiframe has been detected on the line port <Condtype> LINE_OTU4_DLOM <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.152.1.17 |
.1.3.6.1.4.1.20044.76.2.3.2.168
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmlineNetworkLaneRxOtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmlineNetworkLaneRxOtnTable'
List of pmo10010AlmlineNetworkLaneRxOtn Article
Row definition for the pmo10010AlmlineNetworkLaneRxOtn
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmlineNetworkLaneRxOtn
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.2.168.1.1 |
||||
|
Line Network Rx ODU AIS :This
OID indicates an ODU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an ODU Alarm Indication Signal is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.10 |
||||
|
Line Network Rx OTU AIS :This
OID indicates an OTU This OID Indication Signal is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an OTU Alarm Indication Signal is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.11 |
||||
|
Line Network Rx SM BDI :This OID
indicates an SM Backward Defect Indication is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an SM Backward Defect Indication is detected on the Rx … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.12 |
||||
|
Line Network Rx IAE :This OID
indicates an Incoming Alignment Error is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Incoming Alignment Error is detected on the Rx Network inter… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.13 |
||||
|
Line Network Rx OOM :This OID
indicates an Out of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe is detected on the Rx Network interface of the Li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.14 |
||||
|
Line Network Rx LOM :This OID
indicates a Loss of Multiframe is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe is detected on the Rx Network interface of the Li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.15 |
||||
|
Line Network Rx OOF :This OID
indicates an Out of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected on the Rx Network interface of the Line Trscv <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.16 |
||||
|
Line Network Rx LOF :This OID
indicates a Loss of Frame is detected on the Rx Network interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected on the Rx Network interface of the Line Trscv <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.168.1.17 |
.1.3.6.1.4.1.20044.76.2.3.2.184
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmlineHostLaneTxOtnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmlineHostLaneTxOtnTable'
List of pmo10010AlmlineHostLaneTxOtn Article
Row definition for the pmo10010AlmlineHostLaneTxOtn
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmlineHostLaneTxOtn
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.2.184.1.1 |
||||
|
Line Host Tx ODU AIS :This OID
indicates an ODU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an ODU Alarm Indication Signal is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.10 |
||||
|
Line Host Tx OTU AIS :This OID
indicates an OTU This OID Indication Signal is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an OTU Alarm Indication Signal is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.11 |
||||
|
Line Host Tx SM BDI :This OID
indicates an SM Backward Defect Indication is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an SM Backward Defect Indication is detected on the Tx Host i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.12 |
||||
|
Line Host Tx IAE :This OID indicates
an Incoming Alignment Error is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Incoming Alignment Error is detected on the Tx Host interface of t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.13 |
||||
|
Line Host Tx OOM :This OID indicates
an Out of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Multiframe is detected on the Tx Host interface of the Line Trscv … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.14 |
||||
|
Line Host Tx LOM :This OID indicates
a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Multiframe is detected on the Tx Host interface of the Line Trscv … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.15 |
||||
|
Line Host Tx OOF :This OID indicates
an Out of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating an Out of Frame is detected on the Tx Host interface of the Line Trscv <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.16 |
||||
|
Line Host Tx LOF :This OID indicates
a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Help> Alarm indicating a Loss of Frame is detected on the Tx Host interface of the Line Trscv <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.184.1.17 |
.1.3.6.1.4.1.20044.76.2.3.2.256
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmlineOdu4AlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmlineOdu4AlmTable'
List of pmo10010AlmlineOdu4Alm Article
Row definition for the pmo10010AlmlineOdu4Alm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmlineOdu4Alm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.2.256.1.1 |
||||
|
ODU4 DPLM :This OID indicates
a Payload Mismatch is detected on the line port<Help> Alarm indicating a Payload Mismatch <Condtype> LINE_ODU4_DPLM <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Pol… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.4 |
||||
|
ODU4 DDEG :This OID indicates
that a Signal Degrade has been detected on line port<Help> Alarm indicating a Signal Degrade upon threshold and confirmation parameters <Condtype> LINE_ODU4_DDEG <Probcause> degradedS… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.6 |
||||
|
ODU4 IAIS :This OID indicates
that an Alarm Indication Signal has been inserted on line port <Help> This alarm indicates if an Alarm Indication Signal has been inserted on the line port <Condtype> LINE_ODU4_IAIS … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.8 |
||||
|
ODU4 DTIM :This OID indicates
that a Trace Identifier Mismatch has been detected on line port<Help> This alarm indicates if an Trace Identifier Mismatch has been detected on the line port <Condtype> LINE_ODU4_DTIM… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.9 |
||||
|
ODU4 DAIS :This OID indicates
that a Alarm Indication SIgnal has been detected on line port<Help> This alarm indicates if an Alarm Indication Signal has been detected on the line port <Condtype> LINE_ODU4_DAIS <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.10 |
||||
|
ODU4 IOCI :This OID indicates
that an Open Connection has been inserted on line port <Help> This alarm indicates if an Open Connection Indication has been inserted on the line port <Condtype> LINE_ODU4_IOCI <Prob… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.12 |
||||
|
ODU4 DOCI :This OID indicates
that a Open Connection has been detected on line port <Help> This alarm indicates if an Open Connection Indication has been detected on the line port <Condtype> LINE_ODU4_DOCI <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.13 |
||||
|
ODU4 IBDI :This OID indicates
that a Backward Defect Indication has been inserted on line port <Help> This alarm indicates if a Backward Defect Indication has been inserted on the line port <Condtype> LINE_ODU4_I… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.14 |
||||
|
ODU4 DBDI :This OID indicates
that a Backward Defect Indication has been detected on line port<Help> This alarm indicates if a Backward Defect Indication has been detected on the line port <Condtype> LINE_ODU4_DBD… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.15 |
||||
|
ODU4 ILCK :This OID indicates
that a Locked Indication has been inserted on line port <Help> This alarm indicates if a Locked Indication has been inserted on the line port <Condtype> LINE_ODU4_ILCK <Probcause> ot… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.16 |
||||
|
ODU4 DLCK :This OID indicates
that a Locked Indication has been detected on line port <Help> This alarm indicates if a Locked Indication has been detected on the line port <Condtype> LINE_ODU4_DLCK <Probcause> ot… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.2.256.1.17 |
.1.3.6.1.4.1.20044.76.2.3.3.24
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010AlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010AlmsynthAlmLineTable'
List of pmo10010AlmsynthAlmLine Article
Row definition for the pmo10010AlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010AlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.2.3.3.24.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugged <Condtype> XFP_ABSENT <Probcause> inputOutputDeviceE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_NOT_COMPL <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.5 |
||||
|
Line Trscv Laser Shutdown :This
OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Condtype> XFP_TX_OFF <Probcause> other (1) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informationalSt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.9 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condtype> LINE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> LINE_DDM_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.11 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.13 |
||||
|
Line Active :This OID indicates
whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> o… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.2.3.3.24.1.17 |
.1.3.6.1.4.1.20044.76.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrclientNetTxTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrclientNetTxTempTable'
List of pmo10010MesrclientNetTxTemp Article
Row definition for the pmo10010MesrclientNetTxTemp
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrclientNetTxTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.2.16.1.1 |
|
Client Trscv Temperature :This
OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This Measure gives the Las… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.2.16.1.2 |
.1.3.6.1.4.1.20044.76.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrclientNetTxBiasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrclientNetTxBiasTable'
List of pmo10010MesrclientNetTxBias Article
Row definition for the pmo10010MesrclientNetTxBias
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrclientNetTxBias
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.2.32.1.1 |
|
Client Trscv Laser Bias :This
OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This Measure gives the Laser bias value … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.2.32.1.2 |
.1.3.6.1.4.1.20044.76.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrclientNetTxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrclientNetTxPwrTable'
List of pmo10010MesrclientNetTxPwr Article
Row definition for the pmo10010MesrclientNetTxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrclientNetTxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.2.48.1.1 |
|
Client Trscv Tx Power :This OID
gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This Measure gives the transm… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.2.48.1.2 |
.1.3.6.1.4.1.20044.76.3.2.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrclientNetRxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrclientNetRxPwrTable'
List of pmo10010MesrclientNetRxPwr Article
Row definition for the pmo10010MesrclientNetRxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrclientNetRxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.2.64.1.1 |
|
Client Trscv Rx Power :This OID
gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This Measure gives the receive p… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.2.64.1.2 |
.1.3.6.1.4.1.20044.76.3.3.80
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineNetTxLaserOutputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineNetTxLaserOutputPwrTable'
List of pmo10010MesrlineNetTxLaserOutputPwr Article
Row definition for the pmo10010MesrlineNetTxLaserOutputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineNetTxLaserOutputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.80.1.1 |
|
Current Line Trscv Tx Power :This
OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Tx… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.80.1.2 |
.1.3.6.1.4.1.20044.76.3.3.96
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineNetTxLaserTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineNetTxLaserTempTable'
List of pmo10010MesrlineNetTxLaserTemp Article
Row definition for the pmo10010MesrlineNetTxLaserTemp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineNetTxLaserTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.96.1.1 |
|
Current Line Trscv Tx Laser Temperature
:This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This Measur… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.96.1.2 |
.1.3.6.1.4.1.20044.76.3.3.112
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineNetTxBiasCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineNetTxBiasCurrentTable'
List of pmo10010MesrlineNetTxBiasCurrent Article
Row definition for the pmo10010MesrlineNetTxBiasCurrent
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineNetTxBiasCurrent
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.112.1.1 |
|
Current Line Trscv Tx Laser Bias
:This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) <Help> This Measure gives the Tx Laser… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.112.1.2 |
.1.3.6.1.4.1.20044.76.3.3.128
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineNetRxInputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineNetRxInputPwrTable'
List of pmo10010MesrlineNetRxInputPwr Article
Row definition for the pmo10010MesrlineNetRxInputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineNetRxInputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.128.1.1 |
|
Current Line Trscv Rx Power :This
OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Receive powe… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.128.1.2 |
.1.3.6.1.4.1.20044.76.3.3.144
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineResidualChromaticDispTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineResidualChromaticDispTable'
List of pmo10010MesrlineResidualChromaticDisp Article
Row definition for the pmo10010MesrlineResidualChromaticDisp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineResidualChromaticDisp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.144.1.1 |
|
Current Residual Chromatic Dispersion
:This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives the current Residual Chromatic Dispersion on the Line … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.144.1.2 |
.1.3.6.1.4.1.20044.76.3.3.148
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineDiffGroupDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineDiffGroupDelayTable'
List of pmo10010MesrlineDiffGroupDelay Article
Row definition for the pmo10010MesrlineDiffGroupDelay
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineDiffGroupDelay
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.148.1.1 |
|
Current Differential Group Delay
:This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Differential Group Delay on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.148.1.2 |
.1.3.6.1.4.1.20044.76.3.3.152
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineQFactorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineQFactorTable'
List of pmo10010MesrlineQFactor Article
Row definition for the pmo10010MesrlineQFactor
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineQFactor
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.152.1.1 |
|
Current Q Factor :This OID gives
the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.152.1.2 |
.1.3.6.1.4.1.20044.76.3.3.156
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineCarrierFreqOffsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineCarrierFreqOffsetTable'
List of pmo10010MesrlineCarrierFreqOffset Article
Row definition for the pmo10010MesrlineCarrierFreqOffset
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineCarrierFreqOffset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.156.1.1 |
|
Current Carrier Frequency Offset
:This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current Carrier Frequency Offset on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.156.1.2 |
.1.3.6.1.4.1.20044.76.3.3.160
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MesrlineOsnrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MesrlineOsnrTable'
List of pmo10010MesrlineOsnr Article
Row definition for the pmo10010MesrlineOsnr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pmo10010MesrlineOsnr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.3.3.160.1.1 |
|
Current OSNR :This OID gives the
current OSNR on the Line interface (OSNR = AV/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.76.3.3.160.1.2 |
.1.3.6.1.4.1.20044.76.4.2.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntclientInputErrorCounterLaneOneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntclientInputErrorCounterLaneOneTable'
List of pmo10010CntclientInputErrorCounterLaneOne Article
Row definition for the pmo10010CntclientInputErrorCounterLaneOne
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntclientInputErrorCounterLaneOne
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.2.16.1.1 |
||||
|
Client_Input_Error_Counter_Lane1
:This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This counter is incremented each time a coding violation is … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.76.4.2.16.1.2 |
||||
|
Client Input Counter Error :This
OID when set indicates the rate adaptation removal counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.16.1.3 |
||||
|
Client Input Counter Overload
:This OID when set indicates a rate adaptation removal counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.16.1.4 |
.1.3.6.1.4.1.20044.76.4.2.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntclientInputErrorCounterLaneTwoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntclientInputErrorCounterLaneTwoTable'
List of pmo10010CntclientInputErrorCounterLaneTwo Article
Row definition for the pmo10010CntclientInputErrorCounterLaneTwo
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntclientInputErrorCounterLaneTwo
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.2.32.1.1 |
||||
|
Client_Input_Error_Counter_Lane2
:This counter is incremented each time a coding violation is detected on the host lane of the client transceiver <Help> This counter is incremented each time a coding violation is … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.76.4.2.32.1.2 |
||||
|
Client Input Counter Error :This
OID when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.32.1.3 |
||||
|
Client Input Counter Overload
:This OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.32.1.4 |
.1.3.6.1.4.1.20044.76.4.2.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntclientInputErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntclientInputErrorCounterTable'
List of pmo10010CntclientInputErrorCounter Article
Row definition for the pmo10010CntclientInputErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntclientInputErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.2.80.1.1 |
||||
|
Client Input Errors :This counter
is increased each time an error is detected on the Client input stream <Help> This counter gives the number of CBIP errors (at 100G) on the client port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.76.4.2.80.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.80.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.80.1.4 |
.1.3.6.1.4.1.20044.76.4.2.96
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntclientOutputErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntclientOutputErrorCounterTable'
List of pmo10010CntclientOutputErrorCounter Article
Row definition for the pmo10010CntclientOutputErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntclientOutputErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.2.96.1.1 |
||||
|
Client Output Errors :This counter
is increased each time an error is detected on the Client output stream <Help> This counter gives the number of CBIP errors (at 100G) or ODU2 BIP-8 errors (at 10G) on the clien… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.76.4.2.96.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.96.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.2.96.1.4 |
.1.3.6.1.4.1.20044.76.4.3.192
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntlocalLineSmBlockErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntlocalLineSmBlockErrorCounterTable'
List of pmo10010CntlocalLineSmBlockErrorCounter Article
Row definition for the pmo10010CntlocalLineSmBlockErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntlocalLineSmBlockErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.192.1.1 |
||||
|
Line Input SM-Block Errors :This
OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.192.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.192.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.192.1.4 |
.1.3.6.1.4.1.20044.76.4.3.193
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntlocalLineFecCorrectedErrorsCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntlocalLineFecCorrectedErrorsCounterTable'
List of pmo10010CntlocalLineFecCorrectedErrorsCounter Article
Row definition for the pmo10010CntlocalLineFecCorrectedErrorsCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntlocalLineFecCorrectedErrorsCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.193.1.1 |
||||
|
Line Input FEC Corrected Errors
:This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate before the Hard Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.193.1.2 |
||||
|
FEC Counter Error :This bit when
set indicates the FEC corrected errors counter value is invalid on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.193.1.3 |
||||
|
FEC Counter Overload :This bit
when set indicates a FEC corrected errors counter overload on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.193.1.4 |
.1.3.6.1.4.1.20044.76.4.3.194
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntremoteLineSmBlockErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntremoteLineSmBlockErrorCounterTable'
List of pmo10010CntremoteLineSmBlockErrorCounter Article
Row definition for the pmo10010CntremoteLineSmBlockErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntremoteLineSmBlockErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.194.1.1 |
||||
|
Remote SM Block Errors :This OID
gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on t… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.194.1.2 |
||||
|
Remote Counter Error :This bit
when set indicates the FEC corrected errors counter value is invalid on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.194.1.3 |
||||
|
Remote Counter Overload :This
bit when set indicates a FEC corrected errors counter overload on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.194.1.4 |
.1.3.6.1.4.1.20044.76.4.3.195
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntlineDfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntlineDfrmTimCntTable'
List of pmo10010CntlineDfrmTimCnt Article
Row definition for the pmo10010CntlineDfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntlineDfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.195.1.1 |
||||
|
Line Timer Counter :
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.195.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.195.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.195.1.4 |
.1.3.6.1.4.1.20044.76.4.3.196
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntlocalLineTrscvFecCorrectedErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntlocalLineTrscvFecCorrectedErrorCounterTable'
List of pmo10010CntlocalLineTrscvFecCorrectedErrorCounter Article
Row definition for the pmo10010CntlocalLineTrscvFecCorrectedErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntlocalLineTrscvFecCorrectedErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.196.1.1 |
||||
|
Line Input SD FEC Corrected Errors
:This OID gives the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.196.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.196.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.196.1.4 |
.1.3.6.1.4.1.20044.76.4.3.197
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntlocalLineTrscvFecUncorrectedErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntlocalLineTrscvFecUncorrectedErrorCounterTable'
List of pmo10010CntlocalLineTrscvFecUncorrectedErrorCounter Article
Row definition for the pmo10010CntlocalLineTrscvFecUncorrectedErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntlocalLineTrscvFecUncorrectedErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.197.1.1 |
||||
|
SD Uncorrected :This OID gives
the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.197.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.197.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.197.1.4 |
.1.3.6.1.4.1.20044.76.4.3.200
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntlocalLinePmBlockErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntlocalLinePmBlockErrorCounterTable'
List of pmo10010CntlocalLinePmBlockErrorCounter Article
Row definition for the pmo10010CntlocalLinePmBlockErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntlocalLinePmBlockErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.200.1.1 |
||||
|
Line Input PM Block Errors :This
OID gives the PM B1 errors counted as block errors <Help> This counter gives the PM B1 errors counted as block errors |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.200.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.200.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.200.1.4 |
.1.3.6.1.4.1.20044.76.4.3.201
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CntremoteLinePmBlockErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CntremoteLinePmBlockErrorCounterTable'
List of pmo10010CntremoteLinePmBlockErrorCounter Article
Row definition for the pmo10010CntremoteLinePmBlockErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CntremoteLinePmBlockErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.4.3.201.1.1 |
||||
|
Remote PM Block Errors :This OID
gives the PM Remote Error Indication counted as block errorsPM Remote Error Indication counted as block errors |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.4.3.201.1.2 |
||||
|
Remote Counter Error :This OID
when set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.201.1.3 |
||||
|
Remote Counter Overload :This
OID when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.4.3.201.1.4 |
.1.3.6.1.4.1.20044.76.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlaccessLoopTable'
List of pmo10010CtrlaccessLoop Article
Row definition for the pmo10010CtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help> This control enables the Out Loopback on the client… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.2.16.1.2 |
.1.3.6.1.4.1.20044.76.6.2.17
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlclientLoopToLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlclientLoopToLineTable'
List of pmo10010CtrlclientLoopToLine Article
Row definition for the pmo10010CtrlclientLoopToLine
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlclientLoopToLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.2.17.1.1 |
||||
|
Client Terminal Loopback :This
OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control enables the In Loopback on the client port, looping the c… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.2.17.1.2 |
.1.3.6.1.4.1.20044.76.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlcsfUpInsTable'
List of pmo10010CtrlcsfUpIns Article
Row definition for the pmo10010CtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.2.21.1.2 |
.1.3.6.1.4.1.20044.76.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlcaisDwInsTable'
List of pmo10010CtrlcaisDwIns Article
Row definition for the pmo10010CtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.2.22.1.2 |
.1.3.6.1.4.1.20044.76.6.3.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlcommAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlcommAccessLoopTable'
List of pmo10010CtrlcommAccessLoop Article
Row definition for the pmo10010CtrlcommAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlcommAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.3.64.1.1 |
||||
|
Line Terminal Loopback :This OID,
when set, puts the module in common access loop back, looping the 100 Gb/s output signal on the 100 Gb/s input.<Help> This control enables the In Loopback on the line port, loopin… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.3.64.1.2 |
.1.3.6.1.4.1.20044.76.6.3.66
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrllineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrllineLoopTable'
List of pmo10010CtrllineLoop Article
Row definition for the pmo10010CtrllineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrllineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.3.66.1.1 |
||||
|
Line Facility Loopback :This OID,
when set at '1' puts the module in line loopback mode, looping the received 100 Gb/s signal on the transmit 100 Gb/s output. The Upstream part of the module is timed on the 100 Gb… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.3.66.1.2 |
.1.3.6.1.4.1.20044.76.6.3.69
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlfecDisableTable'
List of pmo10010CtrlfecDisable Article
Row definition for the pmo10010CtrlfecDisable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlfecDisable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.3.69.1.1 |
||||
|
Forward Error Correction Inhibition
:This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables the Forward Error Correction on the line interface |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.3.69.1.2 |
.1.3.6.1.4.1.20044.76.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlmsaLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlmsaLineLoopTable'
List of pmo10010CtrlmsaLineLoop Article
Row definition for the pmo10010CtrlmsaLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlmsaLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.3.209.1.1 |
||||
|
MSA Line Loop :This OID operates
a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.3.209.1.2 |
.1.3.6.1.4.1.20044.76.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlmsaTxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlmsaTxResetTable'
List of pmo10010CtrlmsaTxReset Article
Row definition for the pmo10010CtrlmsaTxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlmsaTxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.3.210.1.1 |
||||
|
Line MSA TX Reset :This OID resets
the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.3.210.1.2 |
.1.3.6.1.4.1.20044.76.6.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlmsaRxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlmsaRxResetTable'
List of pmo10010CtrlmsaRxReset Article
Row definition for the pmo10010CtrlmsaRxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlmsaRxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.3.211.1.1 |
||||
|
Line MSA RX Reset :This OID resets
the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.3.211.1.2 |
.1.3.6.1.4.1.20044.76.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CtrlmsaShutdownTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CtrlmsaShutdownTable'
List of pmo10010CtrlmsaShutdown Article
Row definition for the pmo10010CtrlmsaShutdown
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010CtrlmsaShutdown
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.6.3.212.1.1 |
||||
|
Line MSA Shutdown :This OID enters
a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.76.6.3.212.1.2 |
pmo10010RinvSfpTable
table.1.3.6.1.4.1.20044.76.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010RinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010RinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.76.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.7.1.1.1.2 |
pmo10010RinvLineTable
table.1.3.6.1.4.1.20044.76.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010RinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010RinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.76.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.7.1.2.1.2 |
.1.3.6.1.4.1.20044.76.9.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.1.1.1.3 |
.1.3.6.1.4.1.20044.76.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.1.1.3 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.1.1.4 |
|
Default Options on Client Port
:This register configures the default options on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.1.1.14 |
.1.3.6.1.4.1.20044.76.9.2.2
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.2.2.1.1 |
|
Default Settings on Line :This
register configures the default initialisation settings on Line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.2.1.3 |
|
Default Options on Line :This
register configures the default options on the line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.2.1.14 |
pmo10010CfgXfpTable
table.1.3.6.1.4.1.20044.76.9.2.3
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.2.3.1.1 |
|
Default settings on MSA :This
register configures the default initialisation settings on MSA |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.3.1.3 |
.1.3.6.1.4.1.20044.76.9.2.4
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientOtxtlhTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientOtxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.2.4.1.1 |
|
pmo10010CfgControlsPortndeprecated
Defaut Client settings :This register
configures the start-up settings on the ports |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.4.1.3 |
|
Defaut Client output Power :This
register configures the start-up output power of the client transceiver (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.4.1.6 |
|
Default Client transceiver Channel
:This register configures the start-up laser channel of the client transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.4.1.7 |
|
Default Client transceiver Grid
:This register configures the start-up laser grid of the client transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.4.1.8 |
|
Default Client first Frequency
:This register configures the start-up first frequency of the client transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.2.4.1.9 |
.1.3.6.1.4.1.20044.76.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.3.1.1.3 |
.1.3.6.1.4.1.20044.76.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.3.2.1.3 |
pmo10010CfgOtxtlhTable
table.1.3.6.1.4.1.20044.76.9.4.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.4.1.1.1 |
|
Defaut Line output Power :This
register configures the start-up output power of the Line tranceiver (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.4.1.1.6 |
|
Default Line transceiver Tx Channel
:This register configures the start-up laser channel of the Line Tx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.4.1.1.7 |
|
Default Line transceiver Grid
:This register configures the start-up laser grid of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.4.1.1.8 |
|
Default Line TRX lowest Freq :This
register configures the start-up lowest frequency of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.4.1.1.9 |
|
Default Line transceiver Rx Channel
:This register configures the start-up laser channel of the Line Rx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.4.1.1.10 |
.1.3.6.1.4.1.20044.76.9.6.1
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientStartupOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientStartupOduTable'
List of Article
Row definition for the odu2Clienta
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartupOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.6.1.1.1 |
|
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.6.1.1.3 |
|
ODU2 Degrade Threshold :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.6.1.1.4 |
|
ODU2 Degrade Confirmation :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.6.1.1.5 |
|
ODU2 Settings :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.6.1.1.6 |
.1.3.6.1.4.1.20044.76.9.7.1
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLinexStartupOtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLinexStartupOtuTable'
List of Article
Row definition for the otu4Line
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the linexStartupOtu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.7.1.1.1 |
|
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.7.1.1.3 |
|
OTU4 Degrade Threshold :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.7.1.1.4 |
|
OTU4 Degrade Confirmation :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.7.1.1.5 |
|
OTU4 Settings :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.7.1.1.6 |
.1.3.6.1.4.1.20044.76.9.8.1
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLinexStartupOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLinexStartupOduTable'
List of Article
Row definition for the odu4Line
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the linexStartupOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.8.1.1.1 |
|
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.8.1.1.3 |
|
ODU4 Degrade Threshold :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.8.1.1.4 |
|
ODU4 Degrade Confirmation :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.8.1.1.5 |
|
ODU4 Settings :
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.8.1.1.6 |
.1.3.6.1.4.1.20044.76.9.9.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientSapiTxOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientSapiTxOduTable'
List of Article
Row definition for the sapiTxClient
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientSapiTxOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.9.1.1.1 |
|
Client Transmitted SAPI :This
register defines the value of the transmitted Trace Identifier on the line output |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.9.1.1.3 |
.1.3.6.1.4.1.20044.76.9.10.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientSapiExpOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientSapiExpOduTable'
List of Article
Row definition for the sapiExpClient
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientSapiExpOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.10.1.1.1 |
|
Client Expected SAPI :This register
defines the value of the expected Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.10.1.1.3 |
.1.3.6.1.4.1.20044.76.9.11.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientSapiAccOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientSapiAccOduTable'
List of Article
Row definition for the sapiAccClient
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientSapiAccOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.11.1.1.1 |
|
pmo10010CfgClientSapiAccSetupPortndeprecated
Client Accepted SAPI :This register
defines the value of the accepted Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.11.1.1.3 |
.1.3.6.1.4.1.20044.76.9.12.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientDapiTxOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientDapiTxOduTable'
List of Article
Row definition for the dapiTxClient
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientDapiTxOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.12.1.1.1 |
|
Client Transmitted DAPI :This
register defines the value of the transmitted Trace Identifier on the line output |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.12.1.1.3 |
.1.3.6.1.4.1.20044.76.9.13.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientDapiExpOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientDapiExpOduTable'
List of Article
Row definition for the dapiExpClient
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientDapiExpOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.13.1.1.1 |
|
Client Expected DAPI :This register
defines the value of the expected Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.13.1.1.3 |
.1.3.6.1.4.1.20044.76.9.14.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgClientDapiAccOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgClientDapiAccOduTable'
List of Article
Row definition for the dapiAccClient
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientDapiAccOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.14.1.1.1 |
|
pmo10010CfgClientDapiAccSetupPortndeprecated
Client Accepted DAPI :This register
defines the value of the accepted Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.14.1.1.3 |
.1.3.6.1.4.1.20044.76.9.15.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineSapiTxOtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineSapiTxOtuTable'
List of Article
Row definition for the sapiTxLineOtu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineSapiTxOtu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.15.1.1.1 |
|
OTU4 Line Transmitted SAPI :This
register defines the value of the transmitted Trace Identifier on the line output |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.15.1.1.3 |
.1.3.6.1.4.1.20044.76.9.16.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineSapiExpOtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineSapiExpOtuTable'
List of Article
Row definition for the sapiExpLineOtu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineSapiExpOtu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.16.1.1.1 |
|
OTU4 Line Expected SAPI :This
register defines the value of the expected Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.16.1.1.3 |
.1.3.6.1.4.1.20044.76.9.17.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineSapiAccOtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineSapiAccOtuTable'
List of Article
Row definition for the sapiAccLineOtu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineSapiAccOtu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.17.1.1.1 |
|
pmo10010CfgLineSapiAccSetupOtuPortndeprecated
OTU4 Line Accepted SAPI :This
register defines the value of the accepted Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.17.1.1.3 |
.1.3.6.1.4.1.20044.76.9.18.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineDapiTxOtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineDapiTxOtuTable'
List of Article
Row definition for the dapiTxLineOtu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineDapiTxOtu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.18.1.1.1 |
|
OTU4 Line Transmitted DAPI :This
register defines the value of the transmitted Trace Identifier on the line output |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.18.1.1.3 |
.1.3.6.1.4.1.20044.76.9.19.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineDapiExpOtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineDapiExpOtuTable'
List of Article
Row definition for the dapiExpLineOtu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineDapiExpOtu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.19.1.1.1 |
|
OTU4 Line Expected DAPI :This
register defines the value of the expected Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.19.1.1.3 |
.1.3.6.1.4.1.20044.76.9.20.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineDapiAccOtuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineDapiAccOtuTable'
List of Article
Row definition for the dapiAccLineOtu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineDapiAccOtu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.20.1.1.1 |
|
pmo10010CfgLineDapiAccSetupOtuPortndeprecated
OTU4 Line Accepted DAPI :This
register defines the value of the accepted Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.20.1.1.3 |
.1.3.6.1.4.1.20044.76.9.21.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineSapiTxOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineSapiTxOduTable'
List of Article
Row definition for the sapiTxLineOdu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineSapiTxOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.21.1.1.1 |
|
ODU4 Line Transmitted SAPI :This
register defines the value of the transmitted Trace Identifier on the line output |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.21.1.1.3 |
.1.3.6.1.4.1.20044.76.9.22.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineSapiExpOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineSapiExpOduTable'
List of Article
Row definition for the sapiExpLineOdu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineSapiExpOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.22.1.1.1 |
|
ODU4 Line Expected SAPI :This
register defines the value of the expected Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.22.1.1.3 |
.1.3.6.1.4.1.20044.76.9.23.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineSapiAccOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineSapiAccOduTable'
List of Article
Row definition for the sapiAccLineOdu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineSapiAccOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.23.1.1.1 |
|
pmo10010CfgLineSapiAccSetupOduPortndeprecated
ODU4 Line Accepted SAPI :This
register defines the value of the accepted Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.23.1.1.3 |
.1.3.6.1.4.1.20044.76.9.24.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineDapiTxOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineDapiTxOduTable'
List of Article
Row definition for the dapiTxLineOdu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineDapiTxOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.24.1.1.1 |
|
ODU4 Line Transmitted DAPI :This
register defines the value of the transmitted Trace Identifier on the line output |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.24.1.1.3 |
.1.3.6.1.4.1.20044.76.9.25.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineDapiExpOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineDapiExpOduTable'
List of Article
Row definition for the dapiExpLineOdu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineDapiExpOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.25.1.1.1 |
|
ODU4 Line Expected DAPI :This
register defines the value of the expected Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.25.1.1.3 |
.1.3.6.1.4.1.20044.76.9.26.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgLineDapiAccOduTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgLineDapiAccOduTable'
List of Article
Row definition for the dapiAccLineOdu4
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineDapiAccOdu
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.26.1.1.1 |
|
pmo10010CfgLineDapiAccSetupOduPortndeprecated
ODU4 Line Accepted DAPI :This
register defines the value of the accepted Trace Identifier on the line input |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.76.9.26.1.1.3 |
.1.3.6.1.4.1.20044.76.9.27.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010CfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010CfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.9.27.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.27.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.27.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.27.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.27.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.76.9.27.1.1.7 |
.1.3.6.1.4.1.20044.76.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonBytesCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonBytesCounterClientInputTable'
List of pmo10010MonupRmonBytesCounterClientInput Article
Row definition for the pmo10010MonupRmonBytesCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonBytesCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.16.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.16.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonFcsErrorsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonFcsErrorsCounterClientInputTable'
List of pmo10010MonupRmonFcsErrorsCounterClientInput Article
Row definition for the pmo10010MonupRmonFcsErrorsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonFcsErrorsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.32.1.1 |
||||
|
Client Input FCS Errors :This
counter is increased each time a FCS error is detected on the client port <Help> This counter gives the number of FCS Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.32.1.2 |
||||
|
FCS Errors Counter Error :This
OID when set indicates the FCS Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.32.1.3 |
||||
|
FCS Errors Counter Overload :This
OID when set indicates a FCS Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.32.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonPacketsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonPacketsCounterClientInputTable'
List of pmo10010MonupRmonPacketsCounterClientInput Article
Row definition for the pmo10010MonupRmonPacketsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonPacketsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.48.1.1 |
||||
|
Client Input Packets :This counter
is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.48.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.48.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.64
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonBroadcastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonBroadcastCounterClientInputTable'
List of pmo10010MonupRmonBroadcastCounterClientInput Article
Row definition for the pmo10010MonupRmonBroadcastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonBroadcastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.64.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.64.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.64.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.64.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonMulticastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonMulticastCounterClientInputTable'
List of pmo10010MonupRmonMulticastCounterClientInput Article
Row definition for the pmo10010MonupRmonMulticastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonMulticastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.80.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.80.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.80.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.80.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.96
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonPauseFrameCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonPauseFrameCounterClientInputTable'
List of pmo10010MonupRmonPauseFrameCounterClientInput Article
Row definition for the pmo10010MonupRmonPauseFrameCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonPauseFrameCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.96.1.1 |
||||
|
Client Input Pause Frames :This
counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frames received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.96.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.96.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.96.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.160
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonUnicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonUnicastCounterClientInputTable'
List of pmo10010MonupRmonUnicastCounterClientInput Article
Row definition for the pmo10010MonupRmonUnicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonUnicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.160.1.1 |
||||
|
Client Input Unicast Packets :This
counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.160.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.160.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.160.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.176
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MonupRmonNonunicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MonupRmonNonunicastCounterClientInputTable'
List of pmo10010MonupRmonNonunicastCounterClientInput Article
Row definition for the pmo10010MonupRmonNonunicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MonupRmonNonunicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.176.1.1 |
||||
|
Client Input Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number of Non-Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.176.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.176.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.176.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.208
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonBytesCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonBytesCounterClientOutputTable'
List of pmo10010MondownRmonBytesCounterClientOutput Article
Row definition for the pmo10010MondownRmonBytesCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonBytesCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.208.1.1 |
||||
|
Client Output Bytes :This counter
is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.208.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.208.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.208.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.224
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonFcsErrorsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonFcsErrorsCounterClientOutputTable'
List of pmo10010MondownRmonFcsErrorsCounterClientOutput Article
Row definition for the pmo10010MondownRmonFcsErrorsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonFcsErrorsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.224.1.1 |
||||
|
Client Output FCS Errors :This
counter is increased each time a FCS error is detected on the transmit client port <Help> This counter gives the number of FCS Errors transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.224.1.2 |
||||
|
FCS Errors Counter Error :This
OID when set indicates the FCS Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.224.1.3 |
||||
|
FCS Errors Counter Overload :This
OID when set indicates a FCS Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.224.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.240
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonPacketsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonPacketsCounterClientOutputTable'
List of pmo10010MondownRmonPacketsCounterClientOutput Article
Row definition for the pmo10010MondownRmonPacketsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonPacketsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.240.1.1 |
||||
|
Client Output Packets :This counter
is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.240.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.240.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.240.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.256
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonBroadcastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonBroadcastCounterClientOutputTable'
List of pmo10010MondownRmonBroadcastCounterClientOutput Article
Row definition for the pmo10010MondownRmonBroadcastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonBroadcastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.256.1.1 |
||||
|
Client Output Broadcast Packets
:This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number of Broadcast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.256.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.256.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.256.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.272
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonMulticastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonMulticastCounterClientOutputTable'
List of pmo10010MondownRmonMulticastCounterClientOutput Article
Row definition for the pmo10010MondownRmonMulticastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonMulticastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.272.1.1 |
||||
|
Client Output Multicast Packets
:This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number of Multicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.272.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.272.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.272.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.288
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonPauseFrameCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonPauseFrameCounterClientOutputTable'
List of pmo10010MondownRmonPauseFrameCounterClientOutput Article
Row definition for the pmo10010MondownRmonPauseFrameCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonPauseFrameCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.288.1.1 |
||||
|
Client Output Pause Frames :This
counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause frames transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.288.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.288.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.288.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.352
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonUnicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonUnicastCounterClientOutputTable'
List of pmo10010MondownRmonUnicastCounterClientOutput Article
Row definition for the pmo10010MondownRmonUnicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonUnicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.352.1.1 |
||||
|
Client Output Unicast Packets
:This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of Unicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.352.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.352.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.352.1.4 |
.1.3.6.1.4.1.20044.76.11.2.4.368
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pmo10010MondownRmonNonunicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pmo10010-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pmo10010-MIB::pmo10010MondownRmonNonunicastCounterClientOutputTable'
List of pmo10010MondownRmonNonunicastCounterClientOutput Article
Row definition for the pmo10010MondownRmonNonunicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pmo10010MondownRmonNonunicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.76.11.2.4.368.1.1 |
||||
|
Client Output Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the number of Non-Unicast packets transmitted on the client … |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.76.11.2.4.368.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.368.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.76.11.2.4.368.1.4 |