EKINOPS-Pm253-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
97
Rows
97
Columns
628
.1.3.6.1.4.1.20044.13.2.2.1.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmclientSfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmclientSfpWarnDdmTable'
List of pm253AlmclientSfpWarnDdm Article
Row definition for the pm253AlmclientSfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmclientSfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.2.1.48.1.1 |
||||
|
Client SFP Tx Power Low Warning
:Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_PW_LOW_WNG_1 <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.2 |
||||
|
Client SFP Tx Power High Warning
:Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_PWR_HIGH_WNG_1 <Probcause> transmitterFailure… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.3 |
||||
|
Client SFP Bias Low Warning :Warning
indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_BIAS_LOW_WNG_1 <Probcause> transmitterFailure… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.4 |
||||
|
Client SFP Bias High Warning :Warning
indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_BIAS_HIGH_WNG_1 <Probcause> transmitterFail… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.5 |
||||
|
Client SFP Power Supply Low Warning
:Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_VCC_LOW_WNG_1 <Probcause> powerProblem (36) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.6 |
||||
|
Client SFP Power Supply High Warning
:Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_VCC_HIGH_WNG_1 <Probcause> powerProblem (36… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.7 |
||||
|
Client SFP Temp Low Warning :Warning
indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TEMP_LOW_WNG_1 <Probcause> temperatureUnacceptable (51… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.8 |
||||
|
Client SFP Temp High Warning :Warning
indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TEMP_HIGH_WNG_1 <Probcause> temperatureUnacceptable … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.9 |
||||
|
Client SFP Rx Power Low Warning
:Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_RX_PWR_LOW_WNG_1 <Probcause> receiveFailure (41) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.16 |
||||
|
Client SFP Rx Power High Warning
:Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_RX_PWR_HIGH_WNG_1 <Probcause> receiveFailure (41)… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.1.48.1.17 |
.1.3.6.1.4.1.20044.13.2.2.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmclientSfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmclientSfpAlmDdmTable'
List of pm253AlmclientSfpAlmDdm Article
Row definition for the pm253AlmclientSfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmclientSfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.2.2.32.1.1 |
||||
|
Client SFP Tx Power Low :Alarm
indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_PWR_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.2 |
||||
|
Client SFP Tx Power High :Alarm
indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_PWR_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.3 |
||||
|
Client SFP Bias Low :Alarm indicating
that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_BIAS_LOW_ALA_1 <Probcause> transmitterFailure (56) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.4 |
||||
|
Client SFP Bias High :Alarm indicating
that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TX_BIAS_HIGH_ALA_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.5 |
||||
|
Client SFP Power Supply Low :Alarm
indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_VCC_LOW_ALA_1 <Probcause> powerProblem (36) <Alarmtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.6 |
||||
|
Client SFP Power Supply High :Alarm
indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_VCC_HIGH_ALA_1 <Probcause> powerProblem (36) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.7 |
||||
|
Client SFP Temp Low :Alarm indicating
that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TEMP_LOW_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.8 |
||||
|
Client SFP Temp High :Alarm indicating
that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.9 |
||||
|
Client SFP Rx Power Low :Alarm
indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> CLIENT_RX_PWR_LOW_ALA_1 <Probcause> receiveFailure (41) <Alarmtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.16 |
||||
|
Client SFP Rx Power High :Alarm
indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> CLIENT_RX_PWR_HIGH_ALA_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.2.32.1.17 |
.1.3.6.1.4.1.20044.13.2.2.3.8
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmsynthAlmClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmsynthAlmClientTable'
List of pm253AlmsynthAlmClient Article
Row definition for the pm253AlmsynthAlmClient
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmsynthAlmClient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.2.3.8.1.1 |
||||
|
Client SFP Absent :This OID indicates
that the SFP module is not present in the client port. <Help> This alarm indicates if the client transceiver is present. <Condtype> CLIENT_SFP_ABSENT_1 <Probcause> inputOutpu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.2 |
||||
|
DDM Supported On Client SFP :This
OID indicates that the Client SFP module does not support the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Condtype> CLIENT_HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.5 |
||||
|
Client SFP Laser Shutdown :This
OID indicates the Client SFP transmitter output has shut down. <Help> This status indicates if the client transceiver laser is ON or OFF <Condtype> CLIENT_LSD_1 <Probcause> other… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.7 |
||||
|
Remote Client Port In Service
:This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.9 |
||||
|
Warning On Client SFP DDM :This
OID indicates a warning is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> CLIENT_SFP_DD… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.10 |
||||
|
Alarm On Client SFP DDM :This
OID indicates an alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> CLIENT_SFP_DDM_ALM… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Condtype> CLIENT_FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.13 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.8.1.17 |
pm253AlmaccessioAlmTable
table.1.3.6.1.4.1.20044.13.2.2.3.16
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmaccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmaccessioAlmTable'
List of pm253AlmaccessioAlm Article
Row definition for the pm253AlmaccessioAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmaccessioAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.2.3.16.1.1 |
||||
|
Client SFP Tx Failed :This OID
indicates that the transmitter fails for the SFP plugged into the client port (this alarm reports the transmitter failure alarm generated by the SFPs) <Help> This alarm indicates i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.16.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates that no signal is present on the SFP of the client port <Help> This alarm indicates if an optical signal is detected on the client transceiver input <Condtype> CLI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.16.1.5 |
.1.3.6.1.4.1.20044.13.2.2.3.72
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmclientMapperDeAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmclientMapperDeAlmTable'
List of pm253AlmclientMapperDeAlm Article
Row definition for the pm253AlmclientMapperDeAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmclientMapperDeAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.2.3.72.1.1 |
||||
|
Client Loss Of 10b/8b Synchro
:This OID indicates the upstream client input port has lost synchronization on its 10B/8B decoder <Help> This alarms indicates if the input client signal is correctly synchronized w… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.72.1.2 |
||||
|
Client Upstream Buffer Overload
:This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a upstream FIFO overload for this client port <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.72.1.11 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.72.1.12 |
||||
|
Client Downstream Buffer Overload
:This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downstream FIFO overload for this client port <Condtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.72.1.15 |
||||
|
pm253AlmClientLoopAccFifoFailPortndeprecated
Client Port Loop FIFO Failure
:active only in client loopback mode. <Condtype> CLIENT_LOOP_ACC_FIFO_FAIL_1 <Probcause> equipmentMalfunction (16) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.72.1.16 |
.1.3.6.1.4.1.20044.13.2.2.3.104
·
1 row entry
·
8 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmaccessioSdhAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmaccessioSdhAlarmTable'
List of pm253AlmaccessioSdhAlarm Article
Row definition for the pm253AlmaccessioSdhAlarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmaccessioSdhAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.2.3.104.1.1 |
||||
|
Client Transceiver Loss Of Signal
:This OID indicates that a Loss of Signal condition has been detected on the client input transceiver <Condtype> LOS_TRSC_1 <Probcause> receiveFailure (41) <Alarmtype> equipmentAl… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.104.1.2 |
||||
|
Client Transceiver Fifo Error
:This OID indicates that an error has been detected in the FIFO of the client transceiver <Condtype> FIFO_ERR_1 <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarit… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.104.1.3 |
||||
|
Client Rx Clock Lock Error :This
OID indicates the recovered receive clock of the client transceiver is not locked <Condtype> RX_LOSS_OF_LOCK_1 <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.104.1.4 |
||||
|
Client Tx Clock Lock Error :This
OID indicates that the transmit clock of the client transceiver is not locked <Condtype> TX_LOSS_OF_LOCK_1 <Probcause> transmitterFailure (56) <Alarmtype> equipmentAlarm (5) <Polar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.104.1.5 |
||||
|
MS-AIS Detected On Client Input
:This OID indicates that a MS-AIS has been detected on the client input stream <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected on the client input signal <Condt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.104.1.6 |
||||
|
MS-RDI Detected On Client Input
:This OID indicates that a MS-RDI has been detected on the client input stream <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected on the client input signal <Condt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.104.1.7 |
||||
|
Client Rx Out Of Frame :This OID
indicates that an Out Of Frame condition has been detected on the client input stream <Help> This alarm indicates if there is a Out of Frame is detected on the client input sign… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.2.3.104.1.8 |
pm253AlmlineDownS1Table
table.1.3.6.1.4.1.20044.13.2.3.1.130
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmlineDownS1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmlineDownS1Table'
List of pm253AlmlineDownS1 Article
Row definition for the pm253AlmlineDownS1
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253AlmlineDownS1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.1.130.1.1 |
|
Line 1 S1 Extracted Value :This
gives the value of S1 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_S1_8_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.20044.13.2.3.1.130.1.2 |
pm253AlmlineDownK1Table
table.1.3.6.1.4.1.20044.13.2.3.1.131
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmlineDownK1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmlineDownK1Table'
List of pm253AlmlineDownK1 Article
Row definition for the pm253AlmlineDownK1
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253AlmlineDownK1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.1.131.1.1 |
|
Line 1 K1 Extracted Value :This
gives the value of K1 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_K1_8_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.20044.13.2.3.1.131.1.2 |
pm253AlmlineDownK2Table
table.1.3.6.1.4.1.20044.13.2.3.1.132
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmlineDownK2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmlineDownK2Table'
List of pm253AlmlineDownK2 Article
Row definition for the pm253AlmlineDownK2
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253AlmlineDownK2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.1.132.1.1 |
|
Line 1 K2 Extracted Value :This
gives the value of K2 extracted from the overhead of the received OC-48c/STM-16c signal on the line 1 <Condtype> LINE_DW_K2_8_1 <Probcause> other (1) <Alarmtype> other (1) <Polarity… |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.20044.13.2.3.1.132.1.2 |
.1.3.6.1.4.1.20044.13.2.3.1.164
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmlineSfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmlineSfpWarnDdmTable'
List of pm253AlmlineSfpWarnDdm Article
Row definition for the pm253AlmlineSfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmlineSfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.1.164.1.1 |
||||
|
Line SFP Tx Power Low Warning
:Warning indicating that the SFP output power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PW_LOW_WNG_1 <Probcause> transmitterFailure (56) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.2 |
||||
|
Line SFP Tx Power High Warning
:Warning indicating that the SFP output power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PWR_HIGH_WNG_1 <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.3 |
||||
|
Line SFP Bias Low Warning :Warning
indicating that the SFP laser bias current of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BIAS_LOW_WNG_1 <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.4 |
||||
|
Line SFP Bias High Warning :Warning
indicating that the SFP laser bias current of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BIAS_HIGH_WNG_1 <Probcause> transmitterFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.5 |
||||
|
Line SFP Power Supply Low Warning
:Warning indicating that the SFP power supply of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC_LOW_WNG_1 <Probcause> powerProblem (36) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.6 |
||||
|
Line SFP Power Supply High Warning
:Warning indicating that the SFP power supply of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC_HIGH_WNG_1 <Probcause> powerProblem (36) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.7 |
||||
|
Line SFP Temp Low Warning :Warning
indicating that the SFP temperature of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_LOW_WNG_1 <Probcause> temperatureUnacceptable (51) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.8 |
||||
|
Line SFP Temp High Warning :Warning
indicating that the SFP temperature of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_HIGH_WNG_1 <Probcause> temperatureUnacceptable (51)… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.9 |
||||
|
Line SFP Rx Power Low Warning
:Warning indicating that the SFP input power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_LOW_WNG_1 <Probcause> receiveFailure (41) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.16 |
||||
|
Line SFP Rx Power High Warning
:Warning indicating that the SFP input power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_HIGH_WNG_1 <Probcause> receiveFailure (41) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.1.164.1.17 |
.1.3.6.1.4.1.20044.13.2.3.2.162
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmlineSfpAlaDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmlineSfpAlaDdmTable'
List of pm253AlmlineSfpAlaDdm Article
Row definition for the pm253AlmlineSfpAlaDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmlineSfpAlaDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.2.162.1.1 |
||||
|
Line SFP Tx Power Low :Alarm indicating
that the SFP output power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PWR_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.2 |
||||
|
Line SFP Tx Power High :Alarm
indicating that the SFP output power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_PWR_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.3 |
||||
|
Line SFP Bias Low :Alarm indicating
that the SFP laser bias current of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BIAS_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.4 |
||||
|
Line SFP Bias High :Alarm indicating
that the SFP laser bias current of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TX_BIAS_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Ala… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.5 |
||||
|
Line SFP Power Supply Low :Alarm
indicating that the SFP power supply of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC_LOW_ALA_1 <Probcause> powerProblem (36) <Alarmtype> eq… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.6 |
||||
|
Line SFP Power Supply High :Alarm
indicating that the SFP power supply of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_VCC_HIGH_ALA_1 <Probcause> powerProblem (36) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.7 |
||||
|
Line SFP Temp Low :Alarm indicating
that the SFP temperature of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_LOW_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.8 |
||||
|
Line SFP Temp High :Alarm indicating
that the SFP temperature of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.9 |
||||
|
Line SFP Rx Power Low :Alarm indicating
that the SFP input power of Line is lower than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_LOW_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.16 |
||||
|
Line SFP Rx Power High :Alarm
indicating that the SFP input power of Line is higher than the threshold value written in the SFP EEPROM <Condtype> LINE_RX_PWR_HIGH_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.2.162.1.17 |
.1.3.6.1.4.1.20044.13.2.3.3.4
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmsynthAlmLineTable'
List of pm253AlmsynthAlmLine Article
Row definition for the pm253AlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.3.4.1.1 |
||||
|
Line SFP Absent :This OID indicates
that the SFP module is not present in the line port. <Help> This alarm indicates if the line transceiver is present. <Condtype> LINE_SFP_ABSENT_2 <Probcause> inputOutputDeviceE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.2 |
||||
|
DDM Supported On Line SFP :This
OID indicates that the SFP module on line port does not support Digital Diagnostic Monitoring Functions <Help> This status indicates if the client transceiver includes the DDM fea… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.3 |
||||
|
Line HW Fail :This OID indicates
a failure condition on the Line port, the most probable cause being a HW issue <Condtype> LINE_HW_FAIL_2 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Pol… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.5 |
||||
|
Line SFP Laser Shutdown :This
OID indicates the SFP transmitter line output is shut down. <Help> This status indicates if the line transceiver laser is ON or OFF <Condtype> LINE_LSD_2 <Probcause> other (1) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS_2 <Probcause> information… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream MS-RDI/L-RDI has been inserted on the outgoing 2.5 Gb/s SDH/SONET signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.9 |
||||
|
Warning On Line SFP DDM :This
OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> LINE_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.10 |
||||
|
Alarm On Line SFP DDM :This OID
indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> LINE_DDM_A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.11 |
||||
|
Line Fail :This OID indicates
a failure condition on the Line. <Condtype> LINE_FAIL_2 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.13 |
||||
|
Line Active :This OID indicates
the line is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> oth… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.4.1.17 |
pm253AlmlineDfrmAlmTable
table.1.3.6.1.4.1.20044.13.2.3.3.128
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmlineDfrmAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmlineDfrmAlmTable'
List of pm253AlmlineDfrmAlm Article
Row definition for the pm253AlmlineDfrmAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmlineDfrmAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.3.128.1.1 |
||||
|
MS-AIS/L-AIS Detected On Line
Input :This OID indicates that an MS-AIS has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a MS-AIS/L-AIS is detected on the line in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.2 |
||||
|
MS-RDI/L-RDI Detected On Line
Input :This OID indicates that an MS-RDI has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a MS-RDI/L-RDI is detected on the line in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.3 |
||||
|
SONET/SDH Line Out Of Frame :This
OID indicates that an Out Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a Out of Frame is detected on the line inpu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.4 |
||||
|
SONET/SDH Line Loss Of Frame :This
OID indicates that a Loss Of Frame has been detected on incoming OC-48c/STM-16c input signal <Help> This alarm indicates if there is a Loss of Frame is detected on the line in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.5 |
||||
|
P-LOP On STS48c Or 1st STS24c
:This OID indicates that a Loss Of Pointer has been detected on incoming STS-48c (or first STS-24c) input signal <Help> This alarm indicates if Loss of Pointer is detected on the ST… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.10 |
||||
|
P-AIS On STS48c Or 1st STS24c
:This OID indicates that an AU-AIS/AIS-P has been detected on incoming STS-48c (or first STS-24c) input signal <Help> This alarm indicates if a Path AIS is detected on the STS-48c … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.11 |
||||
|
P-LOP On The 2nd STS24c :This
OID indicates that a Loss Of Pointer has been detected on second incoming STS-24c input signal <Help> This alarm indicates if Loss of Pointer is detected on the second STS-24c <Cond… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.12 |
||||
|
P-AIS On The 2nd STS24c :This
OID indicates that an AU-AIS/AIS-P has been detected on second incoming STS-24c input signal <Help> This alarm indicates if a Path AIS is detected on the second STS-24c <Condtype> D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.128.1.13 |
pm253AlmlineIoAlmTable
table.1.3.6.1.4.1.20044.13.2.3.3.160
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253AlmlineIoAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253AlmlineIoAlmTable'
List of pm253AlmlineIoAlm Article
Row definition for the pm253AlmlineIoAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253AlmlineIoAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.2.3.3.160.1.1 |
||||
|
Line SFP Tx Failed :This OID indicates
that the transmitter fails for the SFP plugged into the line port #n (this alarm reports the transmitter failure alarm generated by the SFPs) <Help> This alarm indicates if… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.160.1.2 |
||||
|
Line Input Loss Of Signal :This
OID indicates that no signal is present on the SFP of the line port #n <Help> This alarm indicates if an optical signal is detected on the line transceiver input <Condtype> LINE_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.2.3.3.160.1.5 |
.1.3.6.1.4.1.20044.13.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrclientTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrclientTempMeasTable'
List of pm253MesrclientTempMeas Article
Row definition for the pm253MesrclientTempMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrclientTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.2.16.1.1 |
|
Client SFP Temperature :This OID
gives the temperature value of the client SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperature of th… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.2.16.1.2 |
.1.3.6.1.4.1.20044.13.3.2.24
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrclientVoltMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrclientVoltMeasTable'
List of pm253MesrclientVoltMeas Article
Row definition for the pm253MesrclientVoltMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrclientVoltMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.2.24.1.1 |
|
Client SFP Power Supply :This
OID gives the 3V3 voltage value of the client SFP, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 voltage of the… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.2.24.1.2 |
.1.3.6.1.4.1.20044.13.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrclientBiasMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrclientBiasMeasTable'
List of pm253MesrclientBiasMeas Article
Row definition for the pm253MesrclientBiasMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrclientBiasMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.2.32.1.1 |
|
Client SFP Laser Bias :This OID
gives the bias value of the Client SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the client transceiver |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.2.32.1.2 |
.1.3.6.1.4.1.20044.13.3.2.40
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrclientTxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrclientTxpwrMeasTable'
List of pm253MesrclientTxpwrMeas Article
Row definition for the pm253MesrclientTxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrclientTxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.2.40.1.1 |
|
Client SFP Tx Power :This OID
gives the transmit power value of the Client SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx optical pow… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.2.40.1.2 |
.1.3.6.1.4.1.20044.13.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrclientRxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrclientRxpwrMeasTable'
List of pm253MesrclientRxpwrMeas Article
Row definition for the pm253MesrclientRxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrclientRxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.2.48.1.1 |
|
Client SFP Rx Power :This OID
gives the receive power value of the Client SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx optical power … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.2.48.1.2 |
.1.3.6.1.4.1.20044.13.3.3.160
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrlineTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrlineTempMeasTable'
List of pm253MesrlineTempMeas Article
Row definition for the pm253MesrlineTempMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrlineTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.3.160.1.1 |
|
Line SFP Temperature :This OID
gives the temperature value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temper… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.3.160.1.2 |
.1.3.6.1.4.1.20044.13.3.3.161
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrlineVoltMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrlineVoltMeasTable'
List of pm253MesrlineVoltMeas Article
Row definition for the pm253MesrlineVoltMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrlineVoltMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.3.161.1.1 |
|
Line SFP Power Supply :This OID
gives the 3V3 voltage value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 voltage of the lin… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.3.161.1.2 |
.1.3.6.1.4.1.20044.13.3.3.162
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrlineBiasMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrlineBiasMeasTable'
List of pm253MesrlineBiasMeas Article
Row definition for the pm253MesrlineBiasMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrlineBiasMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.3.162.1.1 |
|
Line SFP Laser Bias :This OID
gives the bias value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the line transceiver |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.3.162.1.2 |
.1.3.6.1.4.1.20044.13.3.3.163
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrlineTxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrlineTxpwrMeasTable'
List of pm253MesrlineTxpwrMeas Article
Row definition for the pm253MesrlineTxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrlineTxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.3.163.1.1 |
|
Line SFP Tx Power :This OID gives
the transmit power value of the Line SFP, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx optical power o… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.3.163.1.2 |
.1.3.6.1.4.1.20044.13.3.3.164
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MesrlineRxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MesrlineRxpwrMeasTable'
List of pm253MesrlineRxpwrMeas Article
Row definition for the pm253MesrlineRxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253MesrlineRxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.3.3.164.1.1 |
|
Line SFP Rx Power :This OID gives
the receive power value of the Line SFP, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx optical power of t… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.13.3.3.164.1.2 |
.1.3.6.1.4.1.20044.13.4.2.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntclientUpRaRemCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntclientUpRaRemCntTable'
List of pm253CntclientUpRaRemCnt Article
Row definition for the pm253CntclientUpRaRemCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntclientUpRaRemCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.2.16.1.1 |
||||
|
Client Rate Adapt. Words Removal
:This counter is incremented each time a rate adaptation 10B word is removed from the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.2.16.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the rate adaptation removal counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.16.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a rate adaptation removal counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.16.1.4 |
.1.3.6.1.4.1.20044.13.4.2.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntclientUpRaInsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntclientUpRaInsCntTable'
List of pm253CntclientUpRaInsCnt Article
Row definition for the pm253CntclientUpRaInsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntclientUpRaInsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.2.24.1.1 |
||||
|
Client Rate Adapt. Words Insertion
:This counter is incremented each time a rate adaptation 10B word is inserted in the Client input stream |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.2.24.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the rate adaptation insertion counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.24.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a rate adaptation insertion counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.24.1.4 |
.1.3.6.1.4.1.20044.13.4.2.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntclientUpDispErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntclientUpDispErrCntTable'
List of pm253CntclientUpDispErrCnt Article
Row definition for the pm253CntclientUpDispErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntclientUpDispErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.2.32.1.1 |
||||
|
Client Input Errors :This counter
is incremented each time a running disparity error or a 10b/8b decoding violation is detected on the Client input stream <Help> This counter gives the number of 10b/8b running d… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.2.32.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the 10B/8B decoding violations counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.32.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a 10B/8B decoding violations counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.32.1.4 |
.1.3.6.1.4.1.20044.13.4.2.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntclientUpTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntclientUpTimCntTable'
List of pm253CntclientUpTimCnt Article
Row definition for the pm253CntclientUpTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntclientUpTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.2.40.1.1 |
||||
|
Client Upstream Timer Counter
:This is the timing counter dedicated to the upstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.2.40.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the upstream timing counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.40.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a upstream timing counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.40.1.4 |
.1.3.6.1.4.1.20044.13.4.2.64
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntclientDwCbipCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntclientDwCbipCntTable'
List of pm253CntclientDwCbipCnt Article
Row definition for the pm253CntclientDwCbipCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntclientDwCbipCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.2.64.1.1 |
||||
|
Client CBIP Errors :This counter
is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of CBIP errors on the client port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.2.64.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the CBIP error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.64.1.3 |
||||
|
Client CBIP Counter Overload :This
OID when set indicates a CBIP error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.64.1.4 |
.1.3.6.1.4.1.20044.13.4.2.72
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntclientDwTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntclientDwTimCntTable'
List of pm253CntclientDwTimCnt Article
Row definition for the pm253CntclientDwTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntclientDwTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.2.72.1.1 |
||||
|
Client Downstream Timer Counter
:This is the timing counter dedicated to the downstream access counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.2.72.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the downstream timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.72.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a downstream timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.2.72.1.4 |
.1.3.6.1.4.1.20044.13.4.3.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntlineDfrmB1ErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntlineDfrmB1ErrCntTable'
List of pm253CntlineDfrmB1ErrCnt Article
Row definition for the pm253CntlineDfrmB1ErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntlineDfrmB1ErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.3.152.1.1 |
||||
|
Line B1 Errors :This counter is
incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 errors on the line port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.3.152.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.3.152.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.3.152.1.4 |
.1.3.6.1.4.1.20044.13.4.3.153
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CntlineDfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CntlineDfrmTimCntTable'
List of pm253CntlineDfrmTimCnt Article
Row definition for the pm253CntlineDfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CntlineDfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.4.3.153.1.1 |
||||
|
Line Timer Counter :This is the
timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.4.3.153.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.3.153.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.4.3.153.1.4 |
.1.3.6.1.4.1.20044.13.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlclientAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlclientAccessLoopTable'
List of pm253CtrlclientAccessLoop Article
Row definition for the pm253CtrlclientAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlclientAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver <Help> This maintenance parameter opera… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.16.1.2 |
.1.3.6.1.4.1.20044.13.6.2.18
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlclientOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlclientOosModeTable'
List of pm253CtrlclientOosMode Article
Row definition for the pm253CtrlclientOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlclientOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.18.1.1 |
||||
|
Client Port Out Of Service :This
OID sets the client port Out Of Service <Help> This controls defines the service state of the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.18.1.2 |
.1.3.6.1.4.1.20044.13.6.2.20
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlclientSfpOnOffCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlclientSfpOnOffCtrlTable'
List of pm253CtrlclientSfpOnOffCtrl Article
Row definition for the pm253CtrlclientSfpOnOffCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlclientSfpOnOffCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.20.1.1 |
||||
|
Client SFP Laser Shutdown :This
OID switches off the Client SFP. <Help> This control defines the laser state of the client transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.20.1.2 |
.1.3.6.1.4.1.20044.13.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlclientCsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlclientCsfUpInsTable'
List of pm253CtrlclientCsfUpIns Article
Row definition for the pm253CtrlclientCsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlclientCsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.21.1.2 |
.1.3.6.1.4.1.20044.13.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlclientCaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlclientCaisDwInsTable'
List of pm253CtrlclientCaisDwIns Article
Row definition for the pm253CtrlclientCaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlclientCaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.22.1.2 |
.1.3.6.1.4.1.20044.13.6.2.26
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlclientAccessTermLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlclientAccessTermLoopTable'
List of pm253CtrlclientAccessTermLoop Article
Row definition for the pm253CtrlclientAccessTermLoop
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlclientAccessTermLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.26.1.1 |
||||
|
Client Terminal Loopback :This
OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver <Help> This maintenance parameter operate… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.26.1.2 |
pm253CtrlProtocolTable
table.1.3.6.1.4.1.20044.13.6.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlProtocolTable'
List of pm253CtrlProtocol Article
Row definition for the pm253CtrlProtocol
table
table
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlProtocol
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.48.1.1 |
||||||||||||||||||||||||||
|
Client Protocol: This OID sets
the protocol of the Client port. |
EKINOPS-MIBEkiProtocolr/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.48.1.2 |
.1.3.6.1.4.1.20044.13.6.2.271
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrlclientResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrlclientResetAllCountTable'
List of pm253CtrlclientResetAllCount Article
Row definition for the pm253CtrlclientResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrlclientResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.2.271.1.1 |
||||
|
pm253CtrlclientResetAllCountsPortndeprecated
Client Counters Reset :This OID
resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history client port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.2.271.1.2 |
pm253CtrllineUpS1Table
table.1.3.6.1.4.1.20044.13.6.3.70
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineUpS1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineUpS1Table'
List of pm253CtrllineUpS1 Article
Row definition for the pm253CtrllineUpS1
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253CtrllineUpS1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.70.1.1 |
|
S1 Value Inserted On Lines Output
:The value to be written in the S1 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.20044.13.6.3.70.1.2 |
pm253CtrllineUpK1Table
table.1.3.6.1.4.1.20044.13.6.3.71
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineUpK1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineUpK1Table'
List of pm253CtrllineUpK1 Article
Row definition for the pm253CtrllineUpK1
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253CtrllineUpK1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.71.1.1 |
|
K1 Value Inserted On Lines Output
:The value to be written in the K1 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.20044.13.6.3.71.1.2 |
pm253CtrllineUpK2Table
table.1.3.6.1.4.1.20044.13.6.3.72
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineUpK2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineUpK2Table'
List of pm253CtrllineUpK2 Article
Row definition for the pm253CtrllineUpK2
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm253CtrllineUpK2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.72.1.1 |
|
K2 Value Inserted On Lines Output
:The value to be written in the K2 byte of the two upstream OC-48c/STM-16c signals is accessible through the present OID |
Integer32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.20044.13.6.3.72.1.2 |
.1.3.6.1.4.1.20044.13.6.3.74
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineOosModeTable'
List of pm253CtrllineOosMode Article
Row definition for the pm253CtrllineOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrllineOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.74.1.1 |
||||
|
Line Port Out Of Service :This
OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.3.74.1.2 |
.1.3.6.1.4.1.20044.13.6.3.160
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineAccessLoopTable'
List of pm253CtrllineAccessLoop Article
Row definition for the pm253CtrllineAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrllineAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.160.1.1 |
||||
|
Line Facility Loopback :This OID
operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management ne… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.3.160.1.2 |
.1.3.6.1.4.1.20044.13.6.3.161
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineLoopTransceiverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineLoopTransceiverTable'
List of pm253CtrllineLoopTransceiver Article
Row definition for the pm253CtrllineLoopTransceiver
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrllineLoopTransceiver
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.161.1.1 |
||||
|
Line Terminal Loopback :This OID
operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers <Help> This maintenance parameter operates a L… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.3.161.1.2 |
.1.3.6.1.4.1.20044.13.6.3.162
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineSfpOnOffCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineSfpOnOffCtrlTable'
List of pm253CtrllineSfpOnOffCtrl Article
Row definition for the pm253CtrllineSfpOnOffCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrllineSfpOnOffCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.162.1.1 |
||||
|
Line SFP Laser Shutdown :This
OID switches off the Line SFP. <Help> This control defines the laser state of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.3.162.1.2 |
.1.3.6.1.4.1.20044.13.6.3.335
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CtrllineResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CtrllineResetAllCountTable'
List of pm253CtrllineResetAllCount Article
Row definition for the pm253CtrllineResetAllCount
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253CtrllineResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.6.3.335.1.1 |
||||
|
pm253CtrllineResetAllCountsPortndeprecated
Line Counters Reset :This OID
resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.13.6.3.335.1.2 |
pm253RinvClientTable
table.1.3.6.1.4.1.20044.13.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253RinvClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253RinvClientTable'
List of the SFPs on the selected module
Row definition for the Client SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for Client SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.13.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the Client SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.13.7.1.1.1.2 |
pm253RinvLineTable
table.1.3.6.1.4.1.20044.13.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253RinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253RinvLineTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.13.7.1.2.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.13.7.1.2.1.2 |
.1.3.6.1.4.1.20044.13.9.1.1
·
1 row entry
·
8 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables Client Port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.1.1.1.3 |
|
Sts24c contributors on Client
Port :This register selects the contributors of STS24c to downstream CAIS/CSF on Port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.1.1.1.4 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the Client Port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.1.1.1.9 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the Client Port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.1.1.1.10 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on Client Port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.1.1.1.18 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on Client Port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.1.1.1.19 |
|
pm253CfgDownLineIoAlmPortndeprecated
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on Client Port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.1.1.1.22 |
.1.3.6.1.4.1.20044.13.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the client port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.2.1.1.3 |
|
Default Protocol on Client Port
:This register configures the default initialisation protocol on the client port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.2.1.1.4 |
|
pm253CfgPortsOptionsPortndeprecated
Default Options on Client Port
:This register configures the default options on the client port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.13.9.2.1.1.6 |
pm253CfgLabelclientTable
table.1.3.6.1.4.1.20044.13.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.13.9.3.1.1.3 |
pm253CfgLabellineTable
table.1.3.6.1.4.1.20044.13.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253CfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253CfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.13.9.3.2.1.3 |
.1.3.6.1.4.1.20044.13.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonByteCntTable'
List of pm253MonupRmonByteCnt Article
Row definition for the pm253MonupRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.16.1.2 |
||||
|
Input Bytes Counter Error :This
OID when set indicates the input Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.16.1.3 |
||||
|
Input Bytes Counter Overload :This
OID when set indicates an input Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonCrcErrorCntTable'
List of pm253MonupRmonCrcErrorCnt Article
Row definition for the pm253MonupRmonCrcErrorCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.24.1.1 |
||||
|
Client Input CRC Errors :This
counter is increased each time a CRC error is detected on the client port. <Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.24.1.2 |
||||
|
Input CRC Errors Counter Error
:This OID when set indicates the input CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.24.1.3 |
||||
|
Input CRC Errors Counter Overload
:This OID when set indicates an input CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.24.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonPacketsCntTable'
List of pm253MonupRmonPacketsCnt Article
Row definition for the pm253MonupRmonPacketsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.32.1.1 |
||||
|
Packets Counter On Client Input
:This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.32.1.2 |
||||
|
Input Packets Counter Error :This
OID when set indicates the input Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.32.1.3 |
||||
|
Input Packets Counter Overload
:This OID when set indicates an input Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.32.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonBroadcastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonBroadcastCntTable'
List of pm253MonupRmonBroadcastCnt Article
Row definition for the pm253MonupRmonBroadcastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonBroadcastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.40.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port. <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.40.1.2 |
||||
|
Input Broadcast Counter Error
:This OID when set indicates the input Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.40.1.3 |
||||
|
Input Broadcast Counter Overload
:This OID when set indicates an input Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.40.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonMulticastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonMulticastCntTable'
List of pm253MonupRmonMulticastCnt Article
Row definition for the pm253MonupRmonMulticastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonMulticastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.48.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port. <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.48.1.2 |
||||
|
Input Multicast Counter Error
:This OID when set indicates the input Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.48.1.3 |
||||
|
Input Multicast Counter Overload
:This OID when set indicates an input Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.56
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonTimerCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonTimerCntTable'
List of pm253MonupRmonTimerCnt Article
Row definition for the pm253MonupRmonTimerCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonTimerCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.56.1.1 |
||||
|
RMON Timer On Client Input :This
is the timing counter dedicated to the upstream RMON counters. It is incremented every 125 us. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.56.1.2 |
||||
|
Input RMON Timer Error :This OID
when set indicates the input RMON timer is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.56.1.3 |
||||
|
Input RMON Timer Overload :This
OID when set indicates an input RMON timer overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.56.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.64
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonPauseFrameCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonPauseFrameCntTable'
List of pm253MonupRmonPauseFrameCnt Article
Row definition for the pm253MonupRmonPauseFrameCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonPauseFrameCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.64.1.1 |
||||
|
Pause Counter On Client Input
:This counter is increased each time a Pause frame is received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.64.1.2 |
||||
|
Input Pause Counter Error :This
OID when set indicates the input Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.64.1.3 |
||||
|
Input Pause Counter Overload :This
OID when set indicates an input Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.64.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.72
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonDropFrameCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonDropFrameCntTable'
List of pm253MonupRmonDropFrameCnt Article
Row definition for the pm253MonupRmonDropFrameCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonDropFrameCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.72.1.1 |
||||
|
Drop Counter On Client Input :This
counter is increased each time a Frame is dropped on the input client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.72.1.2 |
||||
|
Input Drop Counter Error :This
OID when set indicates the input Drop counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.72.1.3 |
||||
|
Input Drop Counter Overload :This
OID when set indicates an input Drop counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.72.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonBitsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonBitsCntTable'
List of pm253MonupRmonBitsCnt Article
Row definition for the pm253MonupRmonBitsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonBitsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.80.1.1 |
||||
|
Bits Counter On Client Input :This
counter is increased each time a bit is received on the input client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.80.1.2 |
||||
|
Input Bits Counter Error :This
OID when set indicates the input Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.80.1.3 |
||||
|
Input Bits Counter Overload :This
OID when set indicates an input Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.80.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.88
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonUnicastCntTable'
List of pm253MonupRmonUnicastCnt Article
Row definition for the pm253MonupRmonUnicastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.88.1.1 |
||||
|
Client Input Unicast Packets :This
counter is increased each time a Unicast packet is received on client input <Help> This counter gives the number of Unicast packets received on the client input port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.88.1.2 |
||||
|
Input Unicast Counter Error :This
OID when set indicates the input Drop counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.88.1.3 |
||||
|
Input Unicast Counter Overload
:This OID when set indicates an input Drop counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.88.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.96
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MonupRmonNonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MonupRmonNonUnicastCntTable'
List of pm253MonupRmonNonUnicastCnt Article
Row definition for the pm253MonupRmonNonUnicastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MonupRmonNonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.96.1.1 |
||||
|
Client Input Not Unicast Packets
:This counter is increased each time a Non Unicast packet is received on client input <Help> This counter gives the number of Non Unicast packets received on the client input p… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.96.1.2 |
||||
|
Input Non Unicast Counter Error
:This OID when set indicates the input Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.96.1.3 |
||||
|
Input Non Unicast Counter Overload
:This OID when set indicates an input Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.96.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonByteCntTable'
List of pm253MondwRmonByteCnt Article
Row definition for the pm253MondwRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.112.1.1 |
||||
|
Client Output Bytes :This counter
is increased each time a data byte is transmitted on the client port. <Help> This counter gives the number of bytes transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.112.1.2 |
||||
|
Output Bytes Counter Error :This
OID when set indicates the output Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.112.1.3 |
||||
|
Output Bytes Counter Overload
:This OID when set indicates an output Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.112.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.120
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonCrcErrorCntTable'
List of pm253MondwRmonCrcErrorCnt Article
Row definition for the pm253MondwRmonCrcErrorCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.120.1.1 |
||||
|
CRC Errors Counter On Client Output
:This counter is increased each time a CRC error is detected on the output client port <Help> This counter gives the number of CRC Errors transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.120.1.2 |
||||
|
Output CRC Errors Counter Error
:This OID when set indicates the output CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.120.1.3 |
||||
|
Output CRC Errors Counter Overload
:This OID when set indicates an output CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.120.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.128
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonPacketsCntTable'
List of pm253MondwRmonPacketsCnt Article
Row definition for the pm253MondwRmonPacketsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.128.1.1 |
||||
|
Packets Counter On Client Output
:This counter is increased each time a packet is transmitted on the client port. <Help> This counter gives the number of packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.128.1.2 |
||||
|
Output Packets Counter Error :This
OID when set indicates the output Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.128.1.3 |
||||
|
Output Packets Counter Overload
:This OID when set indicates an output Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.128.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.136
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonBroadcastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonBroadcastCntTable'
List of pm253MondwRmonBroadcastCnt Article
Row definition for the pm253MondwRmonBroadcastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonBroadcastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.136.1.1 |
||||
|
Client Output Broadcast Packets
:This counter is increased each time a broadcast packet is transmitted on the client port. <Help> This counter gives the number of Broadcast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.136.1.2 |
||||
|
Output Broadcast Counter Error
:This OID when set indicates the output Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.136.1.3 |
||||
|
Output Broadcast Counter Overload
:This OID when set indicates an output Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.136.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonMulticastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonMulticastCntTable'
List of pm253MondwRmonMulticastCnt Article
Row definition for the pm253MondwRmonMulticastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonMulticastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.144.1.1 |
||||
|
Client Output Multicast Packets
:This counter is increased each time a Multicast packet is tra,smitted on the client port. <Help> This counter gives the number of Multicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.144.1.2 |
||||
|
Output Multicast Counter Error
:This OID when set indicates the output Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.144.1.3 |
||||
|
Output Multicast Counter Overload
:This OID when set indicates an output Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.144.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonPauseFrameCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonPauseFrameCntTable'
List of pm253MondwRmonPauseFrameCnt Article
Row definition for the pm253MondwRmonPauseFrameCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonPauseFrameCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.152.1.1 |
||||
|
Pause Counter On Client Output
:This counter is increased each time a Pause frame is generated by the PM on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.152.1.2 |
||||
|
Output Pause Counter Error :This
OID when set indicates the output Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.152.1.3 |
||||
|
Output Pause Counter Overload
:This OID when set indicates an output Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.152.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.160
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonTimerCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonTimerCntTable'
List of pm253MondwRmonTimerCnt Article
Row definition for the pm253MondwRmonTimerCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonTimerCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.160.1.1 |
||||
|
RMON Timer On Client Output :This
is the timing counter dedicated to the downstream RMON counters. It is incremented every 125 us. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.160.1.2 |
||||
|
Output RMON Timer Error :This
OID when set indicates the output RMON timer is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.160.1.3 |
||||
|
Output RMON Timer Overload :This
OID when set indicates an output RMON timer overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.160.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.168
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonBitsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonBitsCntTable'
List of pm253MondwRmonBitsCnt Article
Row definition for the pm253MondwRmonBitsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonBitsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.168.1.1 |
||||
|
Bits Counter On Client Output
:This counter is increased each time a bit is received on the Output client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.168.1.2 |
||||
|
Output Bits Counter Error :This
OID when set indicates the output Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.168.1.3 |
||||
|
Output Bits Counter Overload :This
OID when set indicates an output Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.168.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.176
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonUnicastCntTable'
List of pm253MondwRmonUnicastCnt Article
Row definition for the pm253MondwRmonUnicastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.176.1.1 |
||||
|
Client Output Unicast Packets
:This counter is increased each time a Unicast packet is transmitted on client port <Help> This counter gives the number of Unicast packets transmitted on the client output port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.176.1.2 |
||||
|
Output Unicast Counter Error :This
OID when set indicates the output RMON timer is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.176.1.3 |
||||
|
Output Unicast Counter Overload
:This OID when set indicates an output RMON timer overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.176.1.4 |
.1.3.6.1.4.1.20044.13.11.2.4.184
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253MondwRmonNonUnicastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253MondwRmonNonUnicastCntTable'
List of pm253MondwRmonNonUnicastCnt Article
Row definition for the pm253MondwRmonNonUnicastCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253MondwRmonNonUnicastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.4.184.1.1 |
||||
|
Client Output Not Unicast Packets
:This counter is increased each time a Non Unicast packet is transmitted on client port <Help> This counter gives the number of Non Unicast packets transmitted on the client ou… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.4.184.1.2 |
||||
|
Output Non Unicast Counter Error
:This OID when set indicates the output Bits counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.184.1.3 |
||||
|
Output Non Unicast Counter Overload
:This OID when set indicates an output Bits counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.4.184.1.4 |
.1.3.6.1.4.1.20044.13.11.2.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientCurrent15StatTable'
List of pm253PerfTelecomClientCurrent15Stat Article
Row definition for the pm253PerfTelecomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.16.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.16.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.16.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.16.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.16.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.16.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.16.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.16.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.16.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.16.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.16.1.11 |
.1.3.6.1.4.1.20044.13.11.2.24
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientPast15StatHistoryPort1Table'
List of pm253PerfTelecomClientPast15StatHistory Article
Row definition for the pm253PerfTelecomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.24.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.24.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.24.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.24.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.24.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.24.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.24.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.24.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.24.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.24.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.24.1.11 |
.1.3.6.1.4.1.20044.13.11.2.25
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientPast15StatHistoryPort2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientPast15StatHistoryPort2Table'
List of pm253PerfTelecomClientPast15StatHistory Article
Row definition for the pm253PerfTelecomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.25.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.25.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.25.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.25.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.25.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.25.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.25.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.25.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.25.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.25.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.25.1.11 |
.1.3.6.1.4.1.20044.13.11.2.26
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientPast15StatHistoryPort3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientPast15StatHistoryPort3Table'
List of pm253PerfTelecomClientPast15StatHistory Article
Row definition for the pm253PerfTelecomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.26.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.26.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.26.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.26.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.26.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.26.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.26.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.26.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.26.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.26.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.26.1.11 |
.1.3.6.1.4.1.20044.13.11.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientCurrent24StatTable'
List of pm253PerfTelecomClientCurrent24Stat Article
Row definition for the pm253PerfTelecomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.32.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.32.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.32.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.32.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.32.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.32.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.32.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.32.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.32.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.32.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.32.1.11 |
.1.3.6.1.4.1.20044.13.11.2.40
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientPast24StatHistoryPort1Table'
List of pm253PerfTelecomClientPast24StatHistory Article
Row definition for the pm253PerfTelecomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.40.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.40.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.40.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.40.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.40.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.40.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.40.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.40.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.40.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.40.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.40.1.11 |
.1.3.6.1.4.1.20044.13.11.2.41
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientPast24StatHistoryPort2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientPast24StatHistoryPort2Table'
List of pm253PerfTelecomClientPast24StatHistory Article
Row definition for the pm253PerfTelecomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.41.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.41.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.41.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.41.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.41.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.41.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.41.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.41.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.41.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.41.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.41.1.11 |
.1.3.6.1.4.1.20044.13.11.2.42
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomClientPast24StatHistoryPort3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomClientPast24StatHistoryPort3Table'
List of pm253PerfTelecomClientPast24StatHistory Article
Row definition for the pm253PerfTelecomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.42.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.42.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.42.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.42.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.42.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.42.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.42.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.42.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.42.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.42.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.2.42.1.11 |
.1.3.6.1.4.1.20044.13.11.2.256
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientCurrent15StatTable'
List of pm253PerfDatacomClientCurrent15Stat Article
Row definition for the pm253PerfDatacomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.256.1.1 |
||||
|
Client Current 15-min Input Bytes
counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.2 |
||||
|
Client Current 15-min Input Bytes
counter :This OID gives the current 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.3 |
||||
|
Client Current 15-min Input CRC
counter inv. :This OID indicates that the current 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.4 |
||||
|
Client Current 15-min Input CRC
counter :This OID gives the current 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.5 |
||||
|
Client Current 15-min Input Broadcast
counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.8 |
||||
|
Client Current 15-min Input Broadcast
counter :This OID gives the current 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.9 |
||||
|
Client Current 15-min Input Multicast
counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.10 |
||||
|
Client Current 15-min Input Multicast
counter :This OID gives the current 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.11 |
||||
|
Client Current 15-min Input Unicast
counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.20 |
||||
|
Client Current 15-min Input Unicast
counter :This OID gives the current 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.21 |
||||
|
Client Current 15-min Input Non
Unicast counter inv. :This OID indicates that the current 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.22 |
||||
|
Client Current 15-min Input Non
Unicast counter :This OID gives the current 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.23 |
||||
|
Client Current 15-min Output Bytes
counter inv. :This OID indicates that the current 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.26 |
||||
|
Client Current 15-min Output Bytes
counter :This OID gives the current 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.27 |
||||
|
Client Current 15-min Output Broadcast
counter inv. :This OID indicates that the current 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.32 |
||||
|
Client Current 15-min Output Broadcast
counter :This OID gives the current 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.33 |
||||
|
Client Current 15-min Output Multicast
counter inv. :This OID indicates that the current 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.34 |
||||
|
Client Current 15-min Output Multicast
counter :This OID gives the current 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.35 |
||||
|
Client Current 15-min Output Unicast
counter inv. :This OID indicates that the current 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.42 |
||||
|
Client Current 15-min Output Unicast
counter :This OID gives the current 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.43 |
||||
|
Client Current 15-min Output Non
Unicast counter inv. :This OID indicates that the current 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.256.1.44 |
||||
|
Client Current 15-min Output Non
Unicast counter :This OID gives the current 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.256.1.45 |
.1.3.6.1.4.1.20044.13.11.2.264
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientPast15StatHistoryPort1Table'
List of pm253PerfDatacomClientPast15StatHistory Article
Row definition for the pm253PerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.264.1.1 |
||||
|
Client Past 15-min Input Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.2 |
||||
|
Client Past 15-min Input Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.3 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.5 |
||||
|
Client Past 15-min Input Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.8 |
||||
|
Client Past 15-min Input Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.9 |
||||
|
Client Past 15-min Input Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.10 |
||||
|
Client Past 15-min Input Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.11 |
||||
|
Client Past 15-min Input Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.20 |
||||
|
Client Past 15-min Input Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.21 |
||||
|
Client Past 15-min Input Non Unicast
counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.22 |
||||
|
Client Past 15-min Input Non Unicast
counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.23 |
||||
|
Client Past 15-min Output Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.26 |
||||
|
Client Past 15-min Output Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.27 |
||||
|
Client Past 15-min Output Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.32 |
||||
|
Client Past 15-min Output Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.33 |
||||
|
Client Past 15-min Output Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.34 |
||||
|
Client Past 15-min Output Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.35 |
||||
|
Client Past 15-min Output Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.42 |
||||
|
Client Past 15-min Output Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.43 |
||||
|
Client Past 15-min Output Non
Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.264.1.44 |
||||
|
Client Past 15-min Output Non
Unicast counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.264.1.45 |
.1.3.6.1.4.1.20044.13.11.2.265
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientPast15StatHistoryPort2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientPast15StatHistoryPort2Table'
List of pm253PerfDatacomClientPast15StatHistory Article
Row definition for the pm253PerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.265.1.1 |
||||
|
Client Past 15-min Input Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.2 |
||||
|
Client Past 15-min Input Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.3 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.5 |
||||
|
Client Past 15-min Input Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.8 |
||||
|
Client Past 15-min Input Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.9 |
||||
|
Client Past 15-min Input Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.10 |
||||
|
Client Past 15-min Input Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.11 |
||||
|
Client Past 15-min Input Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.20 |
||||
|
Client Past 15-min Input Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.21 |
||||
|
Client Past 15-min Input Non Unicast
counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.22 |
||||
|
Client Past 15-min Input Non Unicast
counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.23 |
||||
|
Client Past 15-min Output Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.26 |
||||
|
Client Past 15-min Output Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.27 |
||||
|
Client Past 15-min Output Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.32 |
||||
|
Client Past 15-min Output Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.33 |
||||
|
Client Past 15-min Output Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.34 |
||||
|
Client Past 15-min Output Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.35 |
||||
|
Client Past 15-min Output Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.42 |
||||
|
Client Past 15-min Output Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.43 |
||||
|
Client Past 15-min Output Non
Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.265.1.44 |
||||
|
Client Past 15-min Output Non
Unicast counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.265.1.45 |
.1.3.6.1.4.1.20044.13.11.2.266
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientPast15StatHistoryPort3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientPast15StatHistoryPort3Table'
List of pm253PerfDatacomClientPast15StatHistory Article
Row definition for the pm253PerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.266.1.1 |
||||
|
Client Past 15-min Input Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.2 |
||||
|
Client Past 15-min Input Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.3 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.5 |
||||
|
Client Past 15-min Input Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.8 |
||||
|
Client Past 15-min Input Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.9 |
||||
|
Client Past 15-min Input Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.10 |
||||
|
Client Past 15-min Input Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.11 |
||||
|
Client Past 15-min Input Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.20 |
||||
|
Client Past 15-min Input Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.21 |
||||
|
Client Past 15-min Input Non Unicast
counter inv. :This OID indicates that the past 15-min Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.22 |
||||
|
Client Past 15-min Input Non Unicast
counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.23 |
||||
|
Client Past 15-min Output Bytes
counter inv. :This OID indicates that the past 15-min Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.26 |
||||
|
Client Past 15-min Output Bytes
counter :This OID gives the past 15-min Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.27 |
||||
|
Client Past 15-min Output Broadcast
counter inv. :This OID indicates that the past 15-min Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.32 |
||||
|
Client Past 15-min Output Broadcast
counter :This OID gives the past 15-min Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.33 |
||||
|
Client Past 15-min Output Multicast
counter inv. :This OID indicates that the past 15-min Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.34 |
||||
|
Client Past 15-min Output Multicast
counter :This OID gives the past 15-min Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.35 |
||||
|
Client Past 15-min Output Unicast
counter inv. :This OID indicates that the past 15-min Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.42 |
||||
|
Client Past 15-min Output Unicast
counter :This OID gives the past 15-min Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.43 |
||||
|
Client Past 15-min Output Non
Unicast counter inv. :This OID indicates that the past 15-min Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.266.1.44 |
||||
|
Client Past 15-min Output Non
Unicast counter :This OID gives the past 15-min Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.266.1.45 |
.1.3.6.1.4.1.20044.13.11.2.272
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientCurrent24StatTable'
List of pm253PerfDatacomClientCurrent24Stat Article
Row definition for the pm253PerfDatacomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.272.1.1 |
||||
|
Client Current 24-hours Input
Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.2 |
||||
|
Client Current 24-hours Input
Bytes counter :This OID gives the current 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.3 |
||||
|
Client Current 24-hours Input
CRC counter inv. :This OID indicates that the current 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.4 |
||||
|
Client Current 24-hours Input
CRC counter :This OID gives the current 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.5 |
||||
|
Client Current 24-hours Input
Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.8 |
||||
|
Client Current 24-hours Input
Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.9 |
||||
|
Client Current 24-hours Input
Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.10 |
||||
|
Client Current 24-hours Input
Multicast counter :This OID gives the current 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.11 |
||||
|
Client Current 24-hours Input
Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.20 |
||||
|
Client Current 24-hours Input
Unicast counter :This OID gives the current 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.21 |
||||
|
Client Current 24-hours Input
Non Unicast counter inv. :This OID indicates that the current 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.22 |
||||
|
Client Current 24-hours Input
Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.23 |
||||
|
Client Current 24-hours Output
Bytes counter inv. :This OID indicates that the current 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.26 |
||||
|
Client Current 24-hours Output
Bytes counter :This OID gives the current 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.27 |
||||
|
Client Current 24-hours Output
Broadcast counter inv. :This OID indicates that the current 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.32 |
||||
|
Client Current 24-hours Output
Broadcast counter :This OID gives the current 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.33 |
||||
|
Client Current 24-hours Output
Multicast counter inv. :This OID indicates that the current 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.34 |
||||
|
Client Current 24-hours Output
Multicast counter :This OID gives the current 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.35 |
||||
|
Client Current 24-hours Output
Unicast counter inv. :This OID indicates that the current 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.42 |
||||
|
Client Current 24-hours Output
Unicast counter :This OID gives the current 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.43 |
||||
|
Client Current 24-hours Output
Non Unicast counter inv. :This OID indicates that the current 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.272.1.44 |
||||
|
Client Current 24-hours Output
Non Unicast counter :This OID gives the current 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.272.1.45 |
.1.3.6.1.4.1.20044.13.11.2.280
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientPast24StatHistoryPort1Table'
List of pm253PerfDatacomClientPast24StatHistory Article
Row definition for the pm253PerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.280.1.1 |
||||
|
Client Past 24-hours Input Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.2 |
||||
|
Client Past 24-hours Input Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.3 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.5 |
||||
|
Client Past 24-hours Input Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.8 |
||||
|
Client Past 24-hours Input Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.9 |
||||
|
Client Past 24-hours Input Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.10 |
||||
|
Client Past 24-hours Input Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.11 |
||||
|
Client Past 24-hours Input Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.20 |
||||
|
Client Past 24-hours Input Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.21 |
||||
|
Client Past 24-hours Input Non
Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.22 |
||||
|
Client Past 24-hours Input Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.23 |
||||
|
Client Past 24-hours Output Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.26 |
||||
|
Client Past 24-hours Output Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.27 |
||||
|
Client Past 24-hours Output Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.32 |
||||
|
Client Past 24-hours Output Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.33 |
||||
|
Client Past 24-hours Output Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.34 |
||||
|
Client Past 24-hours Output Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.35 |
||||
|
Client Past 24-hours Output Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.42 |
||||
|
Client Past 24-hours Output Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.43 |
||||
|
Client Past 24-hours Output Non
Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.280.1.44 |
||||
|
Client Past 24-hours Output Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.280.1.45 |
.1.3.6.1.4.1.20044.13.11.2.281
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientPast24StatHistoryPort2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientPast24StatHistoryPort2Table'
List of pm253PerfDatacomClientPast24StatHistory Article
Row definition for the pm253PerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.281.1.1 |
||||
|
Client Past 24-hours Input Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.2 |
||||
|
Client Past 24-hours Input Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.3 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.5 |
||||
|
Client Past 24-hours Input Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.8 |
||||
|
Client Past 24-hours Input Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.9 |
||||
|
Client Past 24-hours Input Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.10 |
||||
|
Client Past 24-hours Input Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.11 |
||||
|
Client Past 24-hours Input Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.20 |
||||
|
Client Past 24-hours Input Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.21 |
||||
|
Client Past 24-hours Input Non
Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.22 |
||||
|
Client Past 24-hours Input Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.23 |
||||
|
Client Past 24-hours Output Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.26 |
||||
|
Client Past 24-hours Output Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.27 |
||||
|
Client Past 24-hours Output Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.32 |
||||
|
Client Past 24-hours Output Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.33 |
||||
|
Client Past 24-hours Output Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.34 |
||||
|
Client Past 24-hours Output Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.35 |
||||
|
Client Past 24-hours Output Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.42 |
||||
|
Client Past 24-hours Output Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.43 |
||||
|
Client Past 24-hours Output Non
Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.281.1.44 |
||||
|
Client Past 24-hours Output Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.281.1.45 |
.1.3.6.1.4.1.20044.13.11.2.282
·
1 row entry
·
23 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfDatacomClientPast24StatHistoryPort3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfDatacomClientPast24StatHistoryPort3Table'
List of pm253PerfDatacomClientPast24StatHistory Article
Row definition for the pm253PerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.2.282.1.1 |
||||
|
Client Past 24-hours Input Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.2 |
||||
|
Client Past 24-hours Input Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.3 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.5 |
||||
|
Client Past 24-hours Input Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.8 |
||||
|
Client Past 24-hours Input Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.9 |
||||
|
Client Past 24-hours Input Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.10 |
||||
|
Client Past 24-hours Input Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.11 |
||||
|
Client Past 24-hours Input Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.20 |
||||
|
Client Past 24-hours Input Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.21 |
||||
|
Client Past 24-hours Input Non
Unicast counter inv. :This OID indicates that the past 24-hours Non unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.22 |
||||
|
Client Past 24-hours Input Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.23 |
||||
|
Client Past 24-hours Output Bytes
counter inv. :This OID indicates that the past 24-hours Bytes counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.26 |
||||
|
Client Past 24-hours Output Bytes
counter :This OID gives the past 24-hours Bytes counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.27 |
||||
|
Client Past 24-hours Output Broadcast
counter inv. :This OID indicates that the past 24-hours Broadcast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.32 |
||||
|
Client Past 24-hours Output Broadcast
counter :This OID gives the past 24-hours Broadcast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.33 |
||||
|
Client Past 24-hours Output Multicast
counter inv. :This OID indicates that the past 24-hours Multicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.34 |
||||
|
Client Past 24-hours Output Multicast
counter :This OID gives the past 24-hours Multicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.35 |
||||
|
Client Past 24-hours Output Unicast
counter inv. :This OID indicates that the past 24-hours Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.42 |
||||
|
Client Past 24-hours Output Unicast
counter :This OID gives the past 24-hours Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.43 |
||||
|
Client Past 24-hours Output Non
Unicast counter inv. :This OID indicates that the past 24-hours Non Unicast counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.2.282.1.44 |
||||
|
Client Past 24-hours Output Non
Unicast counter :This OID gives the past 24-hours Non Unicast counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.13.11.2.282.1.45 |
.1.3.6.1.4.1.20044.13.11.3.128
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomLineCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomLineCurrent15StatTable'
List of pm253PerfTelecomLineCurrent15Stat Article
Row definition for the pm253PerfTelecomLineCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomLineCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.3.128.1.1 |
||||
|
Current 15-min CV counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.128.1.2 |
||||
|
Current 15-min CV counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.128.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.128.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.128.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.128.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.128.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.128.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.128.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.128.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.128.1.11 |
.1.3.6.1.4.1.20044.13.11.3.129
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomLinePast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomLinePast15StatHistoryPort1Table'
List of pm253PerfTelecomLinePast15StatHistory Article
Row definition for the pm253PerfTelecomLinePast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomLinePast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.3.129.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.129.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.129.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.129.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.129.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.129.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.129.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.129.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.129.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.129.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.129.1.11 |
.1.3.6.1.4.1.20044.13.11.3.130
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomLineCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomLineCurrent24StatTable'
List of pm253PerfTelecomLineCurrent24Stat Article
Row definition for the pm253PerfTelecomLineCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomLineCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.3.130.1.1 |
||||
|
Current 24-hours CV counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.130.1.2 |
||||
|
Current 24-hours CV counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.130.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.130.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.130.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.130.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.130.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.130.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.130.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.130.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.130.1.11 |
.1.3.6.1.4.1.20044.13.11.3.131
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomLinePast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomLinePast24StatHistoryPort1Table'
List of pm253PerfTelecomLinePast24StatHistory Article
Row definition for the pm253PerfTelecomLinePast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomLinePast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.3.131.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.131.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.131.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.131.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.131.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.131.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.131.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.131.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.131.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.131.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.131.1.11 |
.1.3.6.1.4.1.20044.13.11.3.145
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomLinePast15StatHistoryPort2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomLinePast15StatHistoryPort2Table'
List of pm253PerfTelecomLinePast15StatHistory Article
Row definition for the pm253PerfTelecomLinePast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomLinePast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.3.145.1.1 |
||||
|
Previous 15-min CV counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.145.1.2 |
||||
|
Previous 15-min CV counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.145.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.145.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.145.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.145.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.145.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.145.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.145.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.145.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.145.1.11 |
.1.3.6.1.4.1.20044.13.11.3.147
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm253PerfTelecomLinePast24StatHistoryPort2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm253-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm253-MIB::pm253PerfTelecomLinePast24StatHistoryPort2Table'
List of pm253PerfTelecomLinePast24StatHistory Article
Row definition for the pm253PerfTelecomLinePast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm253PerfTelecomLinePast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.13.11.3.147.1.1 |
||||
|
Previous 24-hours CV counter inv.
:This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.147.1.2 |
||||
|
Previous 24-hours CV counter :This
OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.147.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.147.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.147.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.147.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.147.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.147.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.147.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.13.11.3.147.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.13.11.3.147.1.11 |