EKINOPS-Pm200frs02-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
90
Rows
90
Columns
462
.1.3.6.1.4.1.20044.90.2.2.2.152
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02AlmclientHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02AlmclientHostLaneFaultTable'
List of pm200frs02AlmclientHostLaneFault Article
Row definition for the pm200frs02AlmclientHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02AlmclientHostLaneFaultIndexIndex definition for the pm200frs02AlmclientHostLaneFault table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.2.2.2.152.1.1 | ||||
| pm200frs02AlmClientLossOfSyncPortnClient Frame Alignment Loss :This OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned with the incoming client signal <Condtype> CLIENT_LOSS_OF… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.2 | ||||
| pm200frs02AlmClientInputLossOfSigPortnClient Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Client Trscv <Condtype> CLIENT_INPUT_LOSS_OF_SIG <Probca… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.3 | ||||
| pm200frs02AlmClientLanesMarkerUnlockPortnClient Lanes Marker Unlock :This OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not lock <Condtype> CLIENT_LANES_MARKER_UNLOCK <Probcause> … | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.4 | ||||
| pm200frs02AlmClientLanes6466UnlockPortnClient Lanes 64/66b Unlock :This OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> CLIENT_LANES_64_66_UNLOCK <Probcause> receiveFailure (41… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.5 | ||||
| pm200frs02AlmClientLanesNotAlignedPortnClient Lanes Not Aligned :This OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_NOT_ALIGNED <Probcause> receiveFailure (41) <Alarmtype… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.6 | ||||
| pm200frs02AlmClientCsfDetectedPortnClient Signal Fail Detected :This OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.7 | ||||
| pm200frs02AlmClientTxHostLolPortnClient Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Host Lane <Condtype> CLIENT_TX_HOST_LOL <Probcause… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.10 | ||||
| pm200frs02AlmClientLaneTxFifoErrorPortnClient Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Host Lane <Condtype> CLIENT_LANE_TX_FIFO_ERROR <Probcause… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.2.152.1.11 |
.1.3.6.1.4.1.20044.90.2.2.3.8
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02AlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02AlmsynthAlmPortTable'
List of pm200frs02AlmsynthAlmPort Article
Row definition for the pm200frs02AlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02AlmsynthAlmPortIndexIndex definition for the pm200frs02AlmsynthAlmPort table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.2.2.3.8.1.1 | ||||
| pm200frs02AlmSfpAbsentPortnClient Optical Module Absent :This OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver is not plugged <Condtype> SFP_ABSENT_1 <Probcause> inp… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.2 | ||||
| pm200frs02AlmDdmAbsentPortnDDM Supported On Client Trscv :This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feature <Co… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.3 | ||||
| pm200frs02AlmHwFailAccPortnClient HW Fail :This OID indicates a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.5 | ||||
| pm200frs02AlmDwLsdPortnClient Trscv Laser Shutdown :This OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdown <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmtype… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.6 | ||||
| pm200frs02AlmClientLocalOosPortnLocal Client Port In Service :This OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS <… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.7 | ||||
| pm200frs02AlmClientRemoteOosPortnRemote Client Port In Service :This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE_O… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.8 | ||||
| pm200frs02AlmDwCaisPortnClient AIS Inserted :This OID indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtype>… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.9 | ||||
| pm200frs02AlmSfpDdmWarningPortnWarning On Client Trscv DDM :This OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> SFP_D… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.10 | ||||
| pm200frs02AlmSfpDdmAlmPortnAlarm On Client Trscv DDM :This OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> SFP_DDM_AL… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.11 | ||||
| pm200frs02AlmFailAccPortnClient Access Fail :This OID indicates a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.13 | ||||
| pm200frs02AlmUpCsfPortnClient Signal Fail Inserted :This OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client po… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.90.2.3.1.184
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02AlmlineNetworkLaneAlarmWarning1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02AlmlineNetworkLaneAlarmWarning1Table'
List of pm200frs02AlmlineNetworkLaneAlarmWarning1 Article
Row definition for the pm200frs02AlmlineNetworkLaneAlarmWarning1
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02AlmlineNetworkLaneAlarmWarning1IndexIndex definition for the pm200frs02AlmlineNetworkLaneAlarmWarning1 table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.2.3.1.184.1.1 | ||||
| pm200frs02AlmLineRxPowerLowAlarmPortnLine Trscv Rx Power Low Alarm :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is lower than the thres… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.2 | ||||
| pm200frs02AlmLineRxPowerLowWarningPortnLine Trscv Rx Power Low Warning :This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the t… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.3 | ||||
| pm200frs02AlmLineRxPowerHighWarningPortnLine Trscv Rx Power High Warning :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than th… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.4 | ||||
| pm200frs02AlmLineRxPowerHighAlarmPortnLine Trscv Rx Power High Alarm :This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power is higher than the th… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.5 | ||||
| pm200frs02AlmLineLaserTempLowAlarmPortnLine Trscv Tx Laser Temp Low Alarm :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperature … | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.6 | ||||
| pm200frs02AlmLineLaserTempLowWarningPortnLine Trscv Tx Laser Temp Low Warning :This OID indicates that the Trscv Tx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temperat… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.7 | ||||
| pm200frs02AlmLineLaserTempHighWarningPortnLine Trscv Tx Laser Temp High Warning :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx Laser Temper… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.8 | ||||
| pm200frs02AlmLineLaserTempHighAlarmPortnLine Trscv Tx Laser Temp High Alarm :This OID indicates that the Trscv Tx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx Laser Temperatur… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.9 | ||||
| pm200frs02AlmLineTxPowerLowAlarmPortnLine Trscv Tx Power Low Alarm :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is lower than the thr… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.10 | ||||
| pm200frs02AlmLineTxPowerLowWarningPortnLine Trscv Tx Power Low Warning :This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than the… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.11 | ||||
| pm200frs02AlmLineTxPowerHighWarningPortnLine Trscv Tx Power High Warning :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher than … | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.12 | ||||
| pm200frs02AlmLineTxPowerHighAlarmPortnLine Trscv Tx Power High Alarm :This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power is higher than the … | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.13 | ||||
| pm200frs02AlmLineBiasLowAlarmPortnLine Trscv Tx Bias Low Alarm :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is lower t… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.14 | ||||
| pm200frs02AlmLineBiasLowWarningPortnLine Trscv Tx Bias Low Warning :This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is low… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.15 | ||||
| pm200frs02AlmLineBiasHighWarningPortnLine Trscv Tx Bias High Warning :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is h… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.16 | ||||
| pm200frs02AlmLineBiasHighAlarmPortnLine Trscv Tx Bias High Alarm :This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current is highe… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.184.1.17 |
.1.3.6.1.4.1.20044.90.2.3.1.188
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02AlmlineNetworkLaneAlarmWarning2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02AlmlineNetworkLaneAlarmWarning2Table'
List of pm200frs02AlmlineNetworkLaneAlarmWarning2 Article
Row definition for the pm200frs02AlmlineNetworkLaneAlarmWarning2
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02AlmlineNetworkLaneAlarmWarning2IndexIndex definition for the pm200frs02AlmlineNetworkLaneAlarmWarning2 table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.2.3.1.188.1.1 | ||||
| pm200frs02AlmTxModulatorBiasLowAlarmPortnLine Trscv Tx Modulator Bias Low Alarm :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulator… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.2 | ||||
| pm200frs02AlmTxModulatorBiasLowWarningPortnLine Trscv Tx Modulator Bias Low Warning :This OID indicates that the Trscv Tx modulator bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx modul… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.3 | ||||
| pm200frs02AlmTxModulatorBiasHighWarningPortnLine Trscv Tx Modulator Bias High Warning :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Tx mod… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.4 | ||||
| pm200frs02AlmTxModulatorBiasHighAlarmPortnLine Trscv Tx Modulator Bias High Alarm :This OID indicates that the Trscv Tx modulator bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Tx modulat… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.5 | ||||
| pm200frs02AlmRxLaserTempLowAlarmPortnLine Trscv Rx Laser Temp Low Alarm :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperature … | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.6 | ||||
| pm200frs02AlmRxLaserTempLowWarningPortnLine Trscv Rx Laser Temp Low Warning :This OID indicates that the Trscv Rx Laser Temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temperat… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.7 | ||||
| pm200frs02AlmRxLaserTempHighWarningPortnLine Trscv Rx Laser Temp High Warning :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx Laser Temper… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.8 | ||||
| pm200frs02AlmRxLaserTempHighAlarmPortnLine Trscv Rx Laser Temp High Alarm :This OID indicates that the Trscv Rx Laser Temperature is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx Laser Temperatur… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.9 | ||||
| pm200frs02AlmRxLaserOutputLowAlarmPortnLine Trscv Rx Output Power Low Alarm :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is lower… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.10 | ||||
| pm200frs02AlmRxLaserOutputLowWarningPortnLine Trscv Rx Output Power Low Warning :This OID indicates that the Trscv Rx output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is l… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.11 | ||||
| pm200frs02AlmRxLaserOutputHighWarningPortnLine Trscv Rx Output Power High Warning :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx output power is… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.12 | ||||
| pm200frs02AlmRxLaserOutputHighAlarmPortnLine Trscv Rx Output Power High Alarm :This OID indicates that the Trscv Rx output power is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx output power is hig… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.13 | ||||
| pm200frs02AlmRxLaserBiasLowAlarmPortnLine Trscv Rx Bias Low Alarm :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is l… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.14 | ||||
| pm200frs02AlmRxLaserBiasLowWarningPortnLine Trscv Rx Bias Low Warning :This OID indicates that the Trscv Rx laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias current … | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.15 | ||||
| pm200frs02AlmRxLaserBiasHighWarningPortnLine Trscv Rx Bias High Warning :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv Rx laser bias curren… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.16 | ||||
| pm200frs02AlmRxLaserBiasHighAlarmPortnLine Trscv Rx Bias High Alarm :This OID indicates that the Trscv Rx laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv Rx laser bias current is… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.1.188.1.17 |
.1.3.6.1.4.1.20044.90.2.3.2.196
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02AlmlineHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02AlmlineHostLaneFaultTable'
List of pm200frs02AlmlineHostLaneFault Article
Row definition for the pm200frs02AlmlineHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02AlmlineHostLaneFaultIndexIndex definition for the pm200frs02AlmlineHostLaneFault table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.2.3.2.196.1.1 | ||||
| pm200frs02AlmLineInputLossOfSignalPortnLine Input Loss Of Signal :This OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line Trscv <Condtype> LINE_INPUT_LOSS_OF_SIGNAL <Probcause> … | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.2 | ||||
| pm200frs02AlmLineLossOfFramePortnLine Loss Of Frame :This OID indicates the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incoming Line signal <Condtype> LINE_LOSS_OF_FRAME <Probcau… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.3 | ||||
| pm200frs02AlmLineSmBdiInsertedPortnLine SM BDI Inserted :This OID indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal <Co… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.4 | ||||
| pm200frs02AlmLineSmBdiDetectedPortnLine SM BDI Detected :This OID indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal <Con… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.5 | ||||
| pm200frs02AlmLineSmIaeInsertedPortnLine SM IAE Inserted :This OID indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment Error is inserted on the outgoing Line signal <Condty… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.6 | ||||
| pm200frs02AlmLineSmIaeDetectedPortnLine SM IAE Detected :This OID indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment Error is detected on the incoming Line signal <Condtyp… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.7 | ||||
| pm200frs02AlmLineTxHostLolPortnLine Host Lane Tx Loss Of Lock :This OID indicates a Tx Loss of Lock on the Line Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Line Trscv Host Lane <Condtype> LINE_TX_HOST_LOL <Probcause> receiv… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.10 | ||||
| pm200frs02AlmLineLaneTxFifoErrorPortnLine Host Lane Tx FIFO Error :This OID indicates a Tx FIFO Error on the Line Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Line Trscv Host Lane <Condtype> LINE_LANE_TX_FIFO_ERROR <Probcause> recei… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.2.196.1.11 |
.1.3.6.1.4.1.20044.90.2.3.3.40
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02AlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02AlmsynthAlmLineTable'
List of pm200frs02AlmsynthAlmLine Article
Row definition for the pm200frs02AlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02AlmsynthAlmLineIndexIndex definition for the pm200frs02AlmsynthAlmLine table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.2.3.3.40.1.1 | ||||
| pm200frs02AlmXfpAbsentPortnLine Optical Module Absent :This OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugged <Condtype> XFP_ABSENT <Probcause> inputOutputDeviceE… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.2 | ||||
| pm200frs02AlmXfpInitNotComplPortnLine Optical Module Ready :This OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_NOT_COMPL <Probc… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.3 | ||||
| pm200frs02AlmLineHwFailPortnLine Port HW Failure :This OID indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <P… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.5 | ||||
| pm200frs02AlmXfpTxOffPortnLine Trscv Laser Shutdown :This OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Condtype> XFP_TX_OFF <Probcause> other (1) <Alarmtype> e… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.6 | ||||
| pm200frs02AlmLineLocalOosPortnLine Port In Service :This OID indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informationalSt… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.7 | ||||
| pm200frs02AlmUpRdiInsPortnMS-RDI/L-RDI Inserted On Line :This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the li… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.9 | ||||
| pm200frs02AlmLineDdmWarningPortnWarning On Line Optical Module DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condtype> LINE… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.10 | ||||
| pm200frs02AlmLineDdmAlmPortnAlarm On Line Optical Module DDM :This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> LINE_DDM_… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.11 | ||||
| pm200frs02AlmLineFailPortnLine Port Failure :This OID indicates a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.13 | ||||
| pm200frs02AlmLineActivePortnLine Active :This OID indicates whether the line is active or standby. <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> o… | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.2.3.3.40.1.17 |
.1.3.6.1.4.1.20044.90.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrclientTxPwrMinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrclientTxPwrMinTable'
List of pm200frs02MesrclientTxPwrMin Article
Row definition for the pm200frs02MesrclientTxPwrMin
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrclientTxPwrMinIndexIndex definition for the pm200frs02MesrclientTxPwrMin table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.2.16.1.1 |
| pm200frs02MesrclientTxPwrMinPortnMin Client Trscv Tx Power Per Lane :This OID gives the minimum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16)-40) … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.2.16.1.2 |
.1.3.6.1.4.1.20044.90.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrclientRxPwrMinTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrclientRxPwrMinTable'
List of pm200frs02MesrclientRxPwrMin Article
Row definition for the pm200frs02MesrclientRxPwrMin
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrclientRxPwrMinIndexIndex definition for the pm200frs02MesrclientRxPwrMin table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.2.48.1.1 |
| pm200frs02MesrclientRxPwrMinPortnMin Client Trscv Rx Power Per Lane :This OID gives the minimum receive power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16)-40) (… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.2.48.1.2 |
.1.3.6.1.4.1.20044.90.3.2.80
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrclientTxPwrMaxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrclientTxPwrMaxTable'
List of pm200frs02MesrclientTxPwrMax Article
Row definition for the pm200frs02MesrclientTxPwrMax
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrclientTxPwrMaxIndexIndex definition for the pm200frs02MesrclientTxPwrMax table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.2.80.1.1 |
| pm200frs02MesrclientTxPwrMaxPortnMax Client Trscv Tx Power Per Lane :This OID gives the maximum transmit power value among the network lanes of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16)-40) … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.2.80.1.2 |
.1.3.6.1.4.1.20044.90.3.2.112
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrclientRxPwrMaxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrclientRxPwrMaxTable'
List of pm200frs02MesrclientRxPwrMax Article
Row definition for the pm200frs02MesrclientRxPwrMax
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrclientRxPwrMaxIndexIndex definition for the pm200frs02MesrclientRxPwrMax table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.2.112.1.1 |
| pm200frs02MesrclientRxPwrMaxPortnMax Client Trscv Rx Power Per Lane :This OID gives the maximum receive power value among the network lanes of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16)-40) (Un… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.2.112.1.2 |
.1.3.6.1.4.1.20044.90.3.2.256
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrclientTxCompositePwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrclientTxCompositePwrTable'
List of pm200frs02MesrclientTxCompositePwr Article
Row definition for the pm200frs02MesrclientTxCompositePwr
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrclientTxCompositePwrIndexIndex definition for the pm200frs02MesrclientTxCompositePwr table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.2.256.1.1 |
| pm200frs02MesrclientTxCompositePwrPortnClient Composite Tx Power (LR4/SR4) :This OID gives the composite transmit power (sum of the network lanes transmit power) of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*lo… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.2.256.1.2 |
.1.3.6.1.4.1.20044.90.3.2.288
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrclientRxCompositePwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrclientRxCompositePwrTable'
List of pm200frs02MesrclientRxCompositePwr Article
Row definition for the pm200frs02MesrclientRxCompositePwr
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrclientRxCompositePwrIndexIndex definition for the pm200frs02MesrclientRxCompositePwr table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.2.288.1.1 |
| pm200frs02MesrclientRxCompositePwrPortnClient Composite Rx Power (LR4/SR4) :This OID gives the composite receive power (sum of the network lanes receive power) of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.2.288.1.2 |
.1.3.6.1.4.1.20044.90.3.3.144
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineNetTxLaserOutputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineNetTxLaserOutputPwrTable'
List of pm200frs02MesrlineNetTxLaserOutputPwr Article
Row definition for the pm200frs02MesrlineNetTxLaserOutputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineNetTxLaserOutputPwrIndexIndex definition for the pm200frs02MesrlineNetTxLaserOutputPwr table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.144.1.1 |
| pm200frs02MesrlineNetTxLaserOutputPwrPortnCurrent Line Trscv Tx Power :This OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV_S16/100) (Unit = dBm) <Help> This Measure gives th… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.144.1.2 |
.1.3.6.1.4.1.20044.90.3.3.148
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineNetTxLaserTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineNetTxLaserTempTable'
List of pm200frs02MesrlineNetTxLaserTemp Article
Row definition for the pm200frs02MesrlineNetTxLaserTemp
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineNetTxLaserTempIndexIndex definition for the pm200frs02MesrlineNetTxLaserTemp table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.148.1.1 |
| pm200frs02MesrlineNetTxLaserTempPortnCurrent Line Trscv Tx Laser Temperature :This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Unit = C) <Help> This Me… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.148.1.2 |
.1.3.6.1.4.1.20044.90.3.3.152
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineNetTxBiasCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineNetTxBiasCurrentTable'
List of pm200frs02MesrlineNetTxBiasCurrent Article
Row definition for the pm200frs02MesrlineNetTxBiasCurrent
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineNetTxBiasCurrentIndexIndex definition for the pm200frs02MesrlineNetTxBiasCurrent table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.152.1.1 |
| pm200frs02MesrlineNetTxBiasCurrentPortnCurrent Line Trscv Tx Laser Bias :This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_S16/10) (Unit = mA) <Help> This Measure gives the Tx L… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.152.1.2 |
.1.3.6.1.4.1.20044.90.3.3.156
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineNetRxInputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineNetRxInputPwrTable'
List of pm200frs02MesrlineNetRxInputPwr Article
Row definition for the pm200frs02MesrlineNetRxInputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineNetRxInputPwrIndexIndex definition for the pm200frs02MesrlineNetRxInputPwr table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.156.1.1 |
| pm200frs02MesrlineNetRxInputPwrPortnCurrent Line Trscv Rx Power :This OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV_S16/100) (Unit = dBm) <Help> This Measure gives the Receive … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.156.1.2 |
.1.3.6.1.4.1.20044.90.3.3.160
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineResidualChromaticDispTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineResidualChromaticDispTable'
List of pm200frs02MesrlineResidualChromaticDisp Article
Row definition for the pm200frs02MesrlineResidualChromaticDisp
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineResidualChromaticDispIndexIndex definition for the pm200frs02MesrlineResidualChromaticDisp table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.160.1.1 |
| pm200frs02MesrlineResidualChromaticDispPortnCurrent Residual Chromatic Dispersion :This OID gives the current Residual Chromatic Dispersion on the Line interface (Dispersion = AV_S16*(-2)) (Unit = ps/nm)<Help> This measure gives the current Residual Chroma… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.160.1.2 |
.1.3.6.1.4.1.20044.90.3.3.164
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineDiffGroupDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineDiffGroupDelayTable'
List of pm200frs02MesrlineDiffGroupDelay Article
Row definition for the pm200frs02MesrlineDiffGroupDelay
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineDiffGroupDelayIndexIndex definition for the pm200frs02MesrlineDiffGroupDelay table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.164.1.1 |
| pm200frs02MesrlineDiffGroupDelayPortnCurrent Differential Group Delay :This OID gives the current Differential Group Delay on the Line interface (Delay = AV_S16) (Unit = ps)<Help> This measure gives the current Differential Group Delay on the Lin… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.164.1.2 |
.1.3.6.1.4.1.20044.90.3.3.168
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineQFactorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineQFactorTable'
List of pm200frs02MesrlineQFactor Article
Row definition for the pm200frs02MesrlineQFactor
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineQFactorIndexIndex definition for the pm200frs02MesrlineQFactor table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.168.1.1 |
| pm200frs02MesrlineQFactorPortnCurrent Q Factor :This OID gives the current Q Factor on the Line interface (Q Factor = AV_U16) (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.168.1.2 |
.1.3.6.1.4.1.20044.90.3.3.172
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineCarrierFreqOffsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineCarrierFreqOffsetTable'
List of pm200frs02MesrlineCarrierFreqOffset Article
Row definition for the pm200frs02MesrlineCarrierFreqOffset
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineCarrierFreqOffsetIndexIndex definition for the pm200frs02MesrlineCarrierFreqOffset table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.172.1.1 |
| pm200frs02MesrlineCarrierFreqOffsetPortnCurrent Carrier Frequency Offset :This OID gives the current Carrier Frequency Offset on the Line interface (Offset = AV_S16) (Unit = MHz)<Help> This measure gives the current Carrier Frequency Offset on the Li… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.172.1.2 |
.1.3.6.1.4.1.20044.90.3.3.176
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MesrlineOsnrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MesrlineOsnrTable'
List of pm200frs02MesrlineOsnr Article
Row definition for the pm200frs02MesrlineOsnr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02MesrlineOsnrIndexIndex definition for the pm200frs02MesrlineOsnr table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.3.3.176.1.1 |
| pm200frs02MesrlineOsnrPortnCurrent OSNR :This OID gives the current OSNR on the Line interface (OSNR = AV_S16/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.20044.90.3.3.176.1.2 |
.1.3.6.1.4.1.20044.90.4.2.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntclientInputErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntclientInputErrorCounterTable'
List of pm200frs02CntclientInputErrorCounter Article
Row definition for the pm200frs02CntclientInputErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntclientInputErrorCounterIndexIndex definition for the pm200frs02CntclientInputErrorCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.2.112.1.1 | ||||
| pm200frs02CntclientInputErrorCounterValuePortnClient Input Errors :This counter gives the number of SM-BIP8 on the client port (OTU4 only) <Help> This counter gives the number of SM-BIP8 on the client port (OTU4 only) | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.4.2.112.1.2 | ||||
| pm200frs02CntclientInputErrorCounterErrorPortnClient Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.2.112.1.3 | ||||
| pm200frs02CntclientInputErrorCounterOverloadPortnClient Counter Overload :This OID when set indicates a BIP8 error counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.2.112.1.4 |
.1.3.6.1.4.1.20044.90.4.2.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntclientCbipCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntclientCbipCounterTable'
List of pm200frs02CntclientCbipCounter Article
Row definition for the pm200frs02CntclientCbipCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntclientCbipCounterIndexIndex definition for the pm200frs02CntclientCbipCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.2.144.1.1 | ||||
| pm200frs02CntclientCbipCounterValuePortnClient Output Errors :This counter gives the number of SM-BIP8 on the client port (OTU4 only) <Help> This counter gives the number of SM-BIP8 on the client port (OTU4 only) | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.4.2.144.1.2 | ||||
| pm200frs02CntclientCbipCounterErrorPortnClient Counter Error :This OID when set indicates the BIP8 error counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.2.144.1.3 | ||||
| pm200frs02CntclientCbipCounterOverloadPortnClient CBIP Counter Overload :This OID when set indicates a BIP8 error counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.2.144.1.4 |
.1.3.6.1.4.1.20044.90.4.3.192
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntlocalLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntlocalLineSmBip8ErrorCounterTable'
List of pm200frs02CntlocalLineSmBip8ErrorCounter Article
Row definition for the pm200frs02CntlocalLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntlocalLineSmBip8ErrorCounterIndexIndex definition for the pm200frs02CntlocalLineSmBip8ErrorCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.192.1.1 | ||||
| pm200frs02CntlocalLineSmBip8ErrorCounterValuePortnUncorrected FEC Errors :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.192.1.2 | ||||
| pm200frs02CntlocalLineSmBip8ErrorCounterErrorPortnLine Counter Error :This OID when set indicates the B1 error counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.192.1.3 | ||||
| pm200frs02CntlocalLineSmBip8ErrorCounterOverloadPortnLine Counter Overload :This OID when set indicates a B1 error counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.192.1.4 |
.1.3.6.1.4.1.20044.90.4.3.193
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntlocalLineFecCorrectedErrorsCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntlocalLineFecCorrectedErrorsCounterTable'
List of pm200frs02CntlocalLineFecCorrectedErrorsCounter Article
Row definition for the pm200frs02CntlocalLineFecCorrectedErrorsCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntlocalLineFecCorrectedErrorsCounterIndexIndex definition for the pm200frs02CntlocalLineFecCorrectedErrorsCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.193.1.1 | ||||
| pm200frs02CntlocalLineFecCorrectedErrorsCounterValuePortnLine Input HD FEC Corrected Errors :This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate before the Hard Decision FEC | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.193.1.2 | ||||
| pm200frs02CntlocalLineFecCorrectedErrorsCounterErrorPortnFEC Counter Error :This bit when set indicates the FEC corrected errors counter value is invalid on Line | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.193.1.3 | ||||
| pm200frs02CntlocalLineFecCorrectedErrorsCounterOverloadPortnFEC Counter Overload :This bit when set indicates a FEC corrected errors counter overload on Line | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.193.1.4 |
.1.3.6.1.4.1.20044.90.4.3.194
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntremoteLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntremoteLineSmBip8ErrorCounterTable'
List of pm200frs02CntremoteLineSmBip8ErrorCounter Article
Row definition for the pm200frs02CntremoteLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntremoteLineSmBip8ErrorCounterIndexIndex definition for the pm200frs02CntremoteLineSmBip8ErrorCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.194.1.1 | ||||
| pm200frs02CntremoteLineSmBip8ErrorCounterValuePortnRemote SM BIP8 :This OID gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remot… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.194.1.2 | ||||
| pm200frs02CntremoteLineSmBip8ErrorCounterErrorPortnRemote Counter Error : | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.194.1.3 | ||||
| pm200frs02CntremoteLineSmBip8ErrorCounterOverloadPortnRemote Counter Overload : | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.194.1.4 |
.1.3.6.1.4.1.20044.90.4.3.195
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntlineDfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntlineDfrmTimCntTable'
List of pm200frs02CntlineDfrmTimCnt Article
Row definition for the pm200frs02CntlineDfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntlineDfrmTimCntIndexIndex definition for the pm200frs02CntlineDfrmTimCnt table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.195.1.1 | ||||
| pm200frs02CntlineDfrmTimCntValuePortnLine Timer Counter : | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.195.1.2 | ||||
| pm200frs02CntlineDfrmTimCntErrorPortnLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.195.1.3 | ||||
| pm200frs02CntlineDfrmTimCntOverloadPortnLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.195.1.4 |
.1.3.6.1.4.1.20044.90.4.3.196
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntlocalLineTrscvPreSdFecErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntlocalLineTrscvPreSdFecErrorCounterTable'
List of pm200frs02CntlocalLineTrscvPreSdFecErrorCounter Article
Row definition for the pm200frs02CntlocalLineTrscvPreSdFecErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntlocalLineTrscvPreSdFecErrorCounterIndexIndex definition for the pm200frs02CntlocalLineTrscvPreSdFecErrorCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.196.1.1 | ||||
| pm200frs02CntlocalLineTrscvPreSdFecErrorCounterValuePortnPre FEC Errors :This OID gives the current Bit Error Rate before the FEC <Help> This counter gives the current Bit Error Rate before the FEC | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.196.1.2 | ||||
| pm200frs02CntlocalLineTrscvPreSdFecErrorCounterErrorPortnLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.196.1.3 | ||||
| pm200frs02CntlocalLineTrscvPreSdFecErrorCounterOverloadPortnLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.196.1.4 |
.1.3.6.1.4.1.20044.90.4.3.197
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounterTable'
List of pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounter Article
Row definition for the pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounterIndexIndex definition for the pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.197.1.1 | ||||
| pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounterValuePortnUncorrected FEC Errors :This OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.197.1.2 | ||||
| pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounterErrorPortnLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.197.1.3 | ||||
| pm200frs02CntlocalLineTrscvUncorrectedSdFecErrorCounterOverloadPortnLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.197.1.4 |
.1.3.6.1.4.1.20044.90.4.3.198
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntlocalLineTrscvPreSdFecBitCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntlocalLineTrscvPreSdFecBitCounterTable'
List of pm200frs02CntlocalLineTrscvPreSdFecBitCounter Article
Row definition for the pm200frs02CntlocalLineTrscvPreSdFecBitCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntlocalLineTrscvPreSdFecBitCounterIndexIndex definition for the pm200frs02CntlocalLineTrscvPreSdFecBitCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.198.1.1 | ||||
| pm200frs02CntlocalLineTrscvPreSdFecBitCounterValuePortnPre-SD FEC Bit Counter :This OID gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decision FEC | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.198.1.2 | ||||
| pm200frs02CntlocalLineTrscvPreSdFecBitCounterErrorPortnLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.198.1.3 | ||||
| pm200frs02CntlocalLineTrscvPreSdFecBitCounterOverloadPortnLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.198.1.4 |
.1.3.6.1.4.1.20044.90.4.3.199
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounterTable'
List of pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounter Article
Row definition for the pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounterIndexIndex definition for the pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounter table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.4.3.199.1.1 | ||||
| pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounterValuePortnUncorrected SD FEC Bit Counter :This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count after the Soft Decision FEC (residual) | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.4.3.199.1.2 | ||||
| pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounterErrorPortnLine Counter Error :This OID when set indicates the deframer timer counter value is invalid on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.199.1.3 | ||||
| pm200frs02CntlocalLineTrscvUncorrectedSdFecBitCounterOverloadPortnLine Counter Overload :This OID when set indicates a deframer timer counter overload on Port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.4.3.199.1.4 |
.1.3.6.1.4.1.20044.90.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlaccessLoopTable'
List of pm200frs02CtrlaccessLoop Article
Row definition for the pm200frs02CtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlaccessLoopIndexIndex definition for the pm200frs02CtrlaccessLoop table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.2.16.1.1 | ||||
| pm200frs02CtrlaccessLoopPortnClient Facility Loopback :This OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help> This control enables the Out Loopback on the client… | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.2.16.1.2 |
.1.3.6.1.4.1.20044.90.6.2.17
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlclientLoopToLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlclientLoopToLineTable'
List of pm200frs02CtrlclientLoopToLine Article
Row definition for the pm200frs02CtrlclientLoopToLine
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlclientLoopToLineIndexIndex definition for the pm200frs02CtrlclientLoopToLine table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.2.17.1.1 | ||||
| pm200frs02CtrlclientLoopToLinePortnClient Terminal Loopback :This OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control enables the In Loopback on the client port, looping the c… | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.2.17.1.2 |
.1.3.6.1.4.1.20044.90.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlcsfUpInsTable'
List of pm200frs02CtrlcsfUpIns Article
Row definition for the pm200frs02CtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlcsfUpInsIndexIndex definition for the pm200frs02CtrlcsfUpIns table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.2.21.1.1 | ||||
| pm200frs02CtrlcsfUpInsPortnClient Signal Fail Insertion :This OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.2.21.1.2 |
.1.3.6.1.4.1.20044.90.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlcaisDwInsTable'
List of pm200frs02CtrlcaisDwIns Article
Row definition for the pm200frs02CtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlcaisDwInsIndexIndex definition for the pm200frs02CtrlcaisDwIns table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.2.22.1.1 | ||||
| pm200frs02CtrlcaisDwInsPortnClient AIS Insertion :This OID, when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.2.22.1.2 |
.1.3.6.1.4.1.20044.90.6.2.262
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlclientResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlclientResetAllCountTable'
List of pm200frs02CtrlclientResetAllCount Article
Row definition for the pm200frs02CtrlclientResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlclientResetAllCountIndexIndex definition for the pm200frs02CtrlclientResetAllCount table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.2.262.1.1 | ||||
| pm200frs02CtrlclientResetAllCountsPortnClient Counters Reset :This OID resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history client port counters | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.2.262.1.2 |
.1.3.6.1.4.1.20044.90.6.3.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlcommAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlcommAccessLoopTable'
List of pm200frs02CtrlcommAccessLoop Article
Row definition for the pm200frs02CtrlcommAccessLoop
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlcommAccessLoopIndexIndex definition for the pm200frs02CtrlcommAccessLoop table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.64.1.1 | ||||
| pm200frs02CtrlcommAccessLoopPortnLine Terminal Loopback :This OID, when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This control enables the In Loopback on the line port, loopin… | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.64.1.2 |
.1.3.6.1.4.1.20044.90.6.3.66
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrllineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrllineLoopTable'
List of pm200frs02CtrllineLoop Article
Row definition for the pm200frs02CtrllineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrllineLoopIndexIndex definition for the pm200frs02CtrllineLoop table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.66.1.1 | ||||
| pm200frs02CtrllineLoopPortnLine Facility Loopback :This OID, when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. The Upstream part of the module is timed on the 200 Gb… | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.66.1.2 |
.1.3.6.1.4.1.20044.90.6.3.69
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlfecDisableTable'
List of pm200frs02CtrlfecDisable Article
Row definition for the pm200frs02CtrlfecDisable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlfecDisableIndexIndex definition for the pm200frs02CtrlfecDisable table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.69.1.1 | ||||
| pm200frs02CtrlfecDisablePortnForward Error Correction Inhibition :This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables the Forward Error Correction on the line interface | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.69.1.2 |
.1.3.6.1.4.1.20044.90.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlmsaLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlmsaLineLoopTable'
List of pm200frs02CtrlmsaLineLoop Article
Row definition for the pm200frs02CtrlmsaLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlmsaLineLoopIndexIndex definition for the pm200frs02CtrlmsaLineLoop table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.209.1.1 | ||||
| pm200frs02CtrlmsaLineLoopPortnMSA Line Loop :This OID operates a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.209.1.2 |
.1.3.6.1.4.1.20044.90.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlmsaTxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlmsaTxResetTable'
List of pm200frs02CtrlmsaTxReset Article
Row definition for the pm200frs02CtrlmsaTxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlmsaTxResetIndexIndex definition for the pm200frs02CtrlmsaTxReset table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.210.1.1 | ||||
| pm200frs02CtrlmsaTxResetPortnLine MSA TX Reset :This OID resets the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.210.1.2 |
.1.3.6.1.4.1.20044.90.6.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlmsaRxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlmsaRxResetTable'
List of pm200frs02CtrlmsaRxReset Article
Row definition for the pm200frs02CtrlmsaRxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlmsaRxResetIndexIndex definition for the pm200frs02CtrlmsaRxReset table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.211.1.1 | ||||
| pm200frs02CtrlmsaRxResetPortnLine MSA RX Reset :This OID resets the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.211.1.2 |
.1.3.6.1.4.1.20044.90.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrlmsaShutdownTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrlmsaShutdownTable'
List of pm200frs02CtrlmsaShutdown Article
Row definition for the pm200frs02CtrlmsaShutdown
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrlmsaShutdownIndexIndex definition for the pm200frs02CtrlmsaShutdown table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.212.1.1 | ||||
| pm200frs02CtrlmsaShutdownPortnLine MSA Shutdown :This OID enters a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.212.1.2 |
.1.3.6.1.4.1.20044.90.6.3.263
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CtrllineResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CtrllineResetAllCountTable'
List of pm200frs02CtrllineResetAllCount Article
Row definition for the pm200frs02CtrllineResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02CtrllineResetAllCountIndexIndex definition for the pm200frs02CtrllineResetAllCount table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.6.3.263.1.1 | ||||
| pm200frs02CtrllineResetAllCountsPortnLine Counters Reset :This OID resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line port counters | EKINOPS-MIBEkiStater/w Type Values:
| .1.3.6.1.4.1.20044.90.6.3.263.1.2 |
pm200frs02RinvSfpTable
table.1.3.6.1.4.1.20044.90.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02RinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02RinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02RinvSfpIndexIndex for SFP table | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.20044.90.7.1.1.1.1 |
| pm200frs02RinvsfpInventory for the SFP: This OID contains the inventory for the SFP | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.20044.90.7.1.1.1.2 |
pm200frs02RinvLineTable
table.1.3.6.1.4.1.20044.90.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02RinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02RinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02RinvLineIndexIndex for XFP table | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.20044.90.7.1.2.1.1 |
| pm200frs02RinvxfpLineInventory for the XFP: This OID contains the inventory for the XFP | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.20044.90.7.1.2.1.2 |
.1.3.6.1.4.1.20044.90.9.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgClientcaiscsfIndexIndex definition for the clientcaiscsf table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.1.1.1.1 |
| pm200frs02CfgReservePortnCAIS mode on Client Port :This register enables/disables port laser shutdown on CAIS insertion condition | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.1.1.1.3 |
.1.3.6.1.4.1.20044.90.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgClientStartupIndexIndex definition for the clientStartup table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.2.1.1.1 |
| pm200frs02CfgSystConfPortPortnDefault Settings on Client Port :This register configures the default initialisation settings on the port. | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.2.1.1.3 |
| pm200frs02CfgNetConfPortPortnDefault Settings on Client Port :This register configures the default initialisation settings on the port. | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.2.1.1.4 |
| pm200frs02CfgOptionsPortPortnDefault Options on Client Port :This register configures the default options on the port. | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.2.1.1.14 |
.1.3.6.1.4.1.20044.90.9.2.2
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgLineStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgLineStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgLineStartupIndexIndex definition for the lineStartup table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.2.2.1.1 |
| pm200frs02CfgSystConfLinePortnDefault Settings on Line :This register configures the default initialisation settings on Line | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.2.2.1.3 |
| pm200frs02CfgOptionsLinePortnDefault Options on Line :This register configures the default options on the line | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.2.2.1.14 |
pm200frs02CfgXfpTable
table.1.3.6.1.4.1.20044.90.9.2.3
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgXfpIndexIndex definition for the xfp table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.2.3.1.1 |
| pm200frs02CfgSystConfMsaLinePortnDefault settings on MSA :This register configures the default initialisation settings on MSA | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.2.3.1.3 |
.1.3.6.1.4.1.20044.90.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgLabelclientIndexIndex definition for the labelclient table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.3.1.1.1 |
| pm200frs02CfgLabelclientPortnDefault settings on the label of the Ports :These registers configures the default initialisation settings of the labels of the ports. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.20044.90.9.3.1.1.3 |
.1.3.6.1.4.1.20044.90.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgLabellineIndexIndex definition for the labelline table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.3.2.1.1 |
| pm200frs02CfgLabellinePortnDefault settings on the label of the lines :These registers configures the default initialisation settings of the labels of the lines. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.20044.90.9.3.2.1.3 |
pm200frs02CfgOtxtlhTable
table.1.3.6.1.4.1.20044.90.9.4.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgOtxtlhIndexIndex definition for the otxtlh table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.4.1.1.1 |
| pm200frs02CfgLinePwrLaserPortnDefaut Line output Power :This register configures the start-up output power of the Line tranceiver (Unit = dBm) | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.4.1.1.6 |
| pm200frs02CfgLineFCurrentPortnDefault Line transceiver Tx Channel :This register configures the start-up laser channel of the Line Tx transceiver | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.4.1.1.7 |
| pm200frs02CfgLineGridCurrentPortnDefault Line transceiver Grid :This register configures the start-up laser grid of the Line transceiver | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.4.1.1.8 |
| pm200frs02CfgFPortnDefault Line TRX lowest Freq :This register configures the start-up lowest frequency of the Line transceiver | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.4.1.1.9 |
| pm200frs02CfgRxLineFCurrentPortnDefault Line transceiver Rx Channel :This register configures the start-up laser channel of the Line Rx transceiver | Unsigned32r/w Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.4.1.1.10 |
.1.3.6.1.4.1.20044.90.9.6.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02CfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02CfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
| pm200frs02CfgOtxtlhcapabilitiesIndexIndex definition for the otxtlhcapabilities table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.9.6.1.1.1 |
| pm200frs02CfgComponentTypePortnComponent parameters :This OID defines the component parameters | Unsigned32 Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.6.1.1.3 |
| pm200frs02CfgMiscellaneousPortnMiscellaneous default settings :This OID defines the miscellaneous parameters | Unsigned32 Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.6.1.1.4 |
| pm200frs02CfgFirstChannelPortnNumber of the first channel of the component :This OID defines the first channel number of the PM | Unsigned32 Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.6.1.1.5 |
| pm200frs02CfgLastChannelPortnNumber of the last channel of the component :This OID defines the last channel number of the PM | Unsigned32 Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.6.1.1.6 |
| pm200frs02CfgGridPortnGrid value of the component :This OID defines the grid of the PM | Unsigned32 Constraints: range: 0-65536 | .1.3.6.1.4.1.20044.90.9.6.1.1.7 |
.1.3.6.1.4.1.20044.90.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonBytesCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonBytesCounterClientInputTable'
List of pm200frs02MonupRmonBytesCounterClientInput Article
Row definition for the pm200frs02MonupRmonBytesCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonBytesCounterClientInputIndexIndex definition for the pm200frs02MonupRmonBytesCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.16.1.1 | ||||
| pm200frs02MonupRmonBytesCounterClientInputValuePortnClient Input Bytes :This counter is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.16.1.2 | ||||
| pm200frs02MonupRmonBytesCounterClientInputErrorPortnBytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.16.1.3 | ||||
| pm200frs02MonupRmonBytesCounterClientInputOverloadPortnBytes Counter Overload :This OID when set indicates a Bytes counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonCrcErrorsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonCrcErrorsCounterClientInputTable'
List of pm200frs02MonupRmonCrcErrorsCounterClientInput Article
Row definition for the pm200frs02MonupRmonCrcErrorsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonCrcErrorsCounterClientInputIndexIndex definition for the pm200frs02MonupRmonCrcErrorsCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.48.1.1 | ||||
| pm200frs02MonupRmonCrcErrorsCounterClientInputValuePortnClient Input CRC Errors :This counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.48.1.2 | ||||
| pm200frs02MonupRmonCrcErrorsCounterClientInputErrorPortnCRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.48.1.3 | ||||
| pm200frs02MonupRmonCrcErrorsCounterClientInputOverloadPortnCRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonPacketsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonPacketsCounterClientInputTable'
List of pm200frs02MonupRmonPacketsCounterClientInput Article
Row definition for the pm200frs02MonupRmonPacketsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonPacketsCounterClientInputIndexIndex definition for the pm200frs02MonupRmonPacketsCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.80.1.1 | ||||
| pm200frs02MonupRmonPacketsCounterClientInputValuePortnClient Input Packets :This counter is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.80.1.2 | ||||
| pm200frs02MonupRmonPacketsCounterClientInputErrorPortnPackets Counter Error :This OID when set indicates the Packets counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.80.1.3 | ||||
| pm200frs02MonupRmonPacketsCounterClientInputOverloadPortnPackets Counter Overload :This OID when set indicates a Packets counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.80.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonBroadcastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonBroadcastCounterClientInputTable'
List of pm200frs02MonupRmonBroadcastCounterClientInput Article
Row definition for the pm200frs02MonupRmonBroadcastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonBroadcastCounterClientInputIndexIndex definition for the pm200frs02MonupRmonBroadcastCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.112.1.1 | ||||
| pm200frs02MonupRmonBroadcastCounterClientInputValuePortnClient Input Broadcast Packets :This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.112.1.2 | ||||
| pm200frs02MonupRmonBroadcastCounterClientInputErrorPortnBroadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.112.1.3 | ||||
| pm200frs02MonupRmonBroadcastCounterClientInputOverloadPortnBroadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.112.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonMulticastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonMulticastCounterClientInputTable'
List of pm200frs02MonupRmonMulticastCounterClientInput Article
Row definition for the pm200frs02MonupRmonMulticastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonMulticastCounterClientInputIndexIndex definition for the pm200frs02MonupRmonMulticastCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.144.1.1 | ||||
| pm200frs02MonupRmonMulticastCounterClientInputValuePortnClient Input Multicast Packets :This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.144.1.2 | ||||
| pm200frs02MonupRmonMulticastCounterClientInputErrorPortnMulticast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.144.1.3 | ||||
| pm200frs02MonupRmonMulticastCounterClientInputOverloadPortnMulticast Counter Overload :This OID when set indicates a Multicast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.144.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.176
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonPauseFrameCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonPauseFrameCounterClientInputTable'
List of pm200frs02MonupRmonPauseFrameCounterClientInput Article
Row definition for the pm200frs02MonupRmonPauseFrameCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonPauseFrameCounterClientInputIndexIndex definition for the pm200frs02MonupRmonPauseFrameCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.176.1.1 | ||||
| pm200frs02MonupRmonPauseFrameCounterClientInputValuePortnClient Input Pause Frames :This counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frames received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.176.1.2 | ||||
| pm200frs02MonupRmonPauseFrameCounterClientInputErrorPortnPause Counter Error :This OID when set indicates the Pause counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.176.1.3 | ||||
| pm200frs02MonupRmonPauseFrameCounterClientInputOverloadPortnPause Counter Overload :This OID when set indicates a Pause counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.176.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.304
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonUnicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonUnicastCounterClientInputTable'
List of pm200frs02MonupRmonUnicastCounterClientInput Article
Row definition for the pm200frs02MonupRmonUnicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonUnicastCounterClientInputIndexIndex definition for the pm200frs02MonupRmonUnicastCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.304.1.1 | ||||
| pm200frs02MonupRmonUnicastCounterClientInputValuePortnClient Input Unicast Packets :This counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unicast packets received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.304.1.2 | ||||
| pm200frs02MonupRmonUnicastCounterClientInputErrorPortnUnicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.304.1.3 | ||||
| pm200frs02MonupRmonUnicastCounterClientInputOverloadPortnUnicast Counter Overload :This OID when set indicates a Unicast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.304.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.336
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MonupRmonNonunicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MonupRmonNonunicastCounterClientInputTable'
List of pm200frs02MonupRmonNonunicastCounterClientInput Article
Row definition for the pm200frs02MonupRmonNonunicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MonupRmonNonunicastCounterClientInputIndexIndex definition for the pm200frs02MonupRmonNonunicastCounterClientInput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.336.1.1 | ||||
| pm200frs02MonupRmonNonunicastCounterClientInputValuePortnClient Input Non Unicast Packets :This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number of Non-Unicast packets received on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.336.1.2 | ||||
| pm200frs02MonupRmonNonunicastCounterClientInputErrorPortnNon Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.336.1.3 | ||||
| pm200frs02MonupRmonNonunicastCounterClientInputOverloadPortnNon Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.336.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.400
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonBytesCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonBytesCounterClientOutputTable'
List of pm200frs02MondownRmonBytesCounterClientOutput Article
Row definition for the pm200frs02MondownRmonBytesCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonBytesCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonBytesCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.400.1.1 | ||||
| pm200frs02MondownRmonBytesCounterClientOutputValuePortnClient Output Bytes :This counter is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitted on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.400.1.2 | ||||
| pm200frs02MondownRmonBytesCounterClientOutputErrorPortnBytes Counter Error :This OID when set indicates the Bytes counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.400.1.3 | ||||
| pm200frs02MondownRmonBytesCounterClientOutputOverloadPortnBytes Counter Overload :This OID when set indicates a Bytes counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.400.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.432
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonCrcErrorsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonCrcErrorsCounterClientOutputTable'
List of pm200frs02MondownRmonCrcErrorsCounterClientOutput Article
Row definition for the pm200frs02MondownRmonCrcErrorsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonCrcErrorsCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonCrcErrorsCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.432.1.1 | ||||
| pm200frs02MondownRmonCrcErrorsCounterClientOutputValuePortnClient Output CRC Errors :This counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC Errors transmitted on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.432.1.2 | ||||
| pm200frs02MondownRmonCrcErrorsCounterClientOutputErrorPortnCRC Errors Counter Error :This OID when set indicates the CRC Errors counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.432.1.3 | ||||
| pm200frs02MondownRmonCrcErrorsCounterClientOutputOverloadPortnCRC Errors Counter Overload :This OID when set indicates a CRC Errors counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.432.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.464
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonPacketsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonPacketsCounterClientOutputTable'
List of pm200frs02MondownRmonPacketsCounterClientOutput Article
Row definition for the pm200frs02MondownRmonPacketsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonPacketsCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonPacketsCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.464.1.1 | ||||
| pm200frs02MondownRmonPacketsCounterClientOutputValuePortnClient Output Packets :This counter is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitted on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.464.1.2 | ||||
| pm200frs02MondownRmonPacketsCounterClientOutputErrorPortnPackets Counter Error :This OID when set indicates the Packets counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.464.1.3 | ||||
| pm200frs02MondownRmonPacketsCounterClientOutputOverloadPortnPackets Counter Overload :This OID when set indicates a Packets counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.464.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.496
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonBroadcastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonBroadcastCounterClientOutputTable'
List of pm200frs02MondownRmonBroadcastCounterClientOutput Article
Row definition for the pm200frs02MondownRmonBroadcastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonBroadcastCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonBroadcastCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.496.1.1 | ||||
| pm200frs02MondownRmonBroadcastCounterClientOutputValuePortnClient Output Broadcast Packets :This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number of Broadcast packets transmitted on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.496.1.2 | ||||
| pm200frs02MondownRmonBroadcastCounterClientOutputErrorPortnBroadcast Counter Error :This OID when set indicates the Broadcast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.496.1.3 | ||||
| pm200frs02MondownRmonBroadcastCounterClientOutputOverloadPortnBroadcast Counter Overload :This OID when set indicates a Broadcast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.496.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.528
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonMulticastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonMulticastCounterClientOutputTable'
List of pm200frs02MondownRmonMulticastCounterClientOutput Article
Row definition for the pm200frs02MondownRmonMulticastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonMulticastCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonMulticastCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.528.1.1 | ||||
| pm200frs02MondownRmonMulticastCounterClientOutputValuePortnClient Output Multicast Packets :This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number of Multicast packets transmitted on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.528.1.2 | ||||
| pm200frs02MondownRmonMulticastCounterClientOutputErrorPortnMulticast Counter Error :This OID when set indicates the Multicast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.528.1.3 | ||||
| pm200frs02MondownRmonMulticastCounterClientOutputOverloadPortnMulticast Counter Overload :This OID when set indicates a Multicast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.528.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.560
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonPauseFrameCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonPauseFrameCounterClientOutputTable'
List of pm200frs02MondownRmonPauseFrameCounterClientOutput Article
Row definition for the pm200frs02MondownRmonPauseFrameCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonPauseFrameCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonPauseFrameCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.560.1.1 | ||||
| pm200frs02MondownRmonPauseFrameCounterClientOutputValuePortnClient Output Pause Frames :This counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause frames transmitted on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.560.1.2 | ||||
| pm200frs02MondownRmonPauseFrameCounterClientOutputErrorPortnPause Counter Error :This OID when set indicates the Pause counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.560.1.3 | ||||
| pm200frs02MondownRmonPauseFrameCounterClientOutputOverloadPortnPause Counter Overload :This OID when set indicates a Pause counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.560.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.688
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonUnicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonUnicastCounterClientOutputTable'
List of pm200frs02MondownRmonUnicastCounterClientOutput Article
Row definition for the pm200frs02MondownRmonUnicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonUnicastCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonUnicastCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.688.1.1 | ||||
| pm200frs02MondownRmonUnicastCounterClientOutputValuePortnClient Output Unicast Packets :This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of Unicast packets transmitted on the client port | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.688.1.2 | ||||
| pm200frs02MondownRmonUnicastCounterClientOutputErrorPortnUnicast Counter Error :This OID when set indicates the Unicast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.688.1.3 | ||||
| pm200frs02MondownRmonUnicastCounterClientOutputOverloadPortnUnicast Counter Overload :This OID when set indicates a Unicast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.688.1.4 |
.1.3.6.1.4.1.20044.90.11.2.4.720
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02MondownRmonNonunicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02MondownRmonNonunicastCounterClientOutputTable'
List of pm200frs02MondownRmonNonunicastCounterClientOutput Article
Row definition for the pm200frs02MondownRmonNonunicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02MondownRmonNonunicastCounterClientOutputIndexIndex definition for the pm200frs02MondownRmonNonunicastCounterClientOutput table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.2.4.720.1.1 | ||||
| pm200frs02MondownRmonNonunicastCounterClientOutputValuePortnClient Output Non Unicast Packets :This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the number of Non-Unicast packets transmitted on the client … | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.2.4.720.1.2 | ||||
| pm200frs02MondownRmonNonunicastCounterClientOutputErrorPortnNon Unicast Counter Error :This OID when set indicates the Non-Unicast counter value is invalid on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.720.1.3 | ||||
| pm200frs02MondownRmonNonunicastCounterClientOutputOverloadPortnNon Unicast Counter Overload :This OID when set indicates a Non-Unicast counter overload on client port | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.2.4.720.1.4 |
.1.3.6.1.4.1.20044.90.11.6.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomInputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomInputClientCurrent15StatTable'
List of pm200frs02PerfTelecomInputClientCurrent15Stat Article
Row definition for the pm200frs02PerfTelecomInputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomInputClientCurrent15StatIndexIndex definition for the pm200frs02PerfTelecomInputClientCurrent15Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.16.1.1 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatInvCvPortnCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.16.1.2 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatCvValuePortnCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.16.1.3 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatInvEsPortnCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.16.1.4 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatEsValuePortnCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.16.1.5 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatInvSesPortnCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.16.1.6 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatSesValuePortnCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.16.1.7 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatInvSefsPortnCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.16.1.8 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatSefsValuePortnCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.16.1.9 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatInvUasPortnCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.16.1.10 | ||||
| pm200frs02PerfTelecomInputClientCurrent15StatUasValuePortnCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.16.1.11 |
.1.3.6.1.4.1.20044.90.11.6.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomInputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomInputClientPast15StatHistoryPort1Table'
List of pm200frs02PerfTelecomInputClientPast15StatHistory Article
Row definition for the pm200frs02PerfTelecomInputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomInputClientPast15StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomInputClientPast15StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.48.1.1 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryInvCvPort1Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.48.1.2 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryCvValuePort1Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.48.1.3 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryInvEsPort1Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.48.1.4 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryEsValuePort1Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.48.1.5 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryInvSesPort1Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.48.1.6 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistorySesValuePort1Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.48.1.7 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryInvSefsPort1Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.48.1.8 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistorySefsValuePort1Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.48.1.9 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryInvUasPort1Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.48.1.10 | ||||
| pm200frs02PerfTelecomInputClientPast15StatHistoryUasValuePort1Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.48.1.11 |
.1.3.6.1.4.1.20044.90.11.6.80
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomInputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomInputClientCurrent24StatTable'
List of pm200frs02PerfTelecomInputClientCurrent24Stat Article
Row definition for the pm200frs02PerfTelecomInputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomInputClientCurrent24StatIndexIndex definition for the pm200frs02PerfTelecomInputClientCurrent24Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.80.1.1 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatInvCvPortnCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.80.1.2 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatCvValuePortnCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.80.1.3 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatInvEsPortnCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.80.1.4 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatEsValuePortnCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.80.1.5 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatInvSesPortnCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.80.1.6 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatSesValuePortnCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.80.1.7 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatInvSefsPortnCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.80.1.8 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatSefsValuePortnCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.80.1.9 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatInvUasPortnCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.80.1.10 | ||||
| pm200frs02PerfTelecomInputClientCurrent24StatUasValuePortnCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.80.1.11 |
.1.3.6.1.4.1.20044.90.11.6.112
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomInputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomInputClientPast24StatHistoryPort1Table'
List of pm200frs02PerfTelecomInputClientPast24StatHistory Article
Row definition for the pm200frs02PerfTelecomInputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomInputClientPast24StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomInputClientPast24StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.112.1.1 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryInvCvPort1Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.112.1.2 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryCvValuePort1Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.112.1.3 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryInvEsPort1Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.112.1.4 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryEsValuePort1Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.112.1.5 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryInvSesPort1Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.112.1.6 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistorySesValuePort1Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.112.1.7 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryInvSefsPort1Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.112.1.8 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistorySefsValuePort1Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.112.1.9 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryInvUasPort1Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.112.1.10 | ||||
| pm200frs02PerfTelecomInputClientPast24StatHistoryUasValuePort1Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.112.1.11 |
.1.3.6.1.4.1.20044.90.11.6.144
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomOutputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomOutputClientCurrent15StatTable'
List of pm200frs02PerfTelecomOutputClientCurrent15Stat Article
Row definition for the pm200frs02PerfTelecomOutputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomOutputClientCurrent15StatIndexIndex definition for the pm200frs02PerfTelecomOutputClientCurrent15Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.144.1.1 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatInvCvPortnCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.144.1.2 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatCvValuePortnCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.144.1.3 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatInvEsPortnCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.144.1.4 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatEsValuePortnCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.144.1.5 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatInvSesPortnCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.144.1.6 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatSesValuePortnCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.144.1.7 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatInvSefsPortnCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.144.1.8 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatSefsValuePortnCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.144.1.9 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatInvUasPortnCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.144.1.10 | ||||
| pm200frs02PerfTelecomOutputClientCurrent15StatUasValuePortnCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.144.1.11 |
.1.3.6.1.4.1.20044.90.11.6.176
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomOutputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomOutputClientPast15StatHistoryPort1Table'
List of pm200frs02PerfTelecomOutputClientPast15StatHistory Article
Row definition for the pm200frs02PerfTelecomOutputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomOutputClientPast15StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomOutputClientPast15StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.176.1.1 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryInvCvPort1Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.176.1.2 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryCvValuePort1Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.176.1.3 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryInvEsPort1Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.176.1.4 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryEsValuePort1Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.176.1.5 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryInvSesPort1Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.176.1.6 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistorySesValuePort1Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.176.1.7 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryInvSefsPort1Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.176.1.8 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistorySefsValuePort1Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.176.1.9 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryInvUasPort1Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.176.1.10 | ||||
| pm200frs02PerfTelecomOutputClientPast15StatHistoryUasValuePort1Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.176.1.11 |
.1.3.6.1.4.1.20044.90.11.6.208
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomOutputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomOutputClientCurrent24StatTable'
List of pm200frs02PerfTelecomOutputClientCurrent24Stat Article
Row definition for the pm200frs02PerfTelecomOutputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomOutputClientCurrent24StatIndexIndex definition for the pm200frs02PerfTelecomOutputClientCurrent24Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.208.1.1 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatInvCvPortnCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.208.1.2 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatCvValuePortnCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.208.1.3 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatInvEsPortnCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.208.1.4 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatEsValuePortnCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.208.1.5 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatInvSesPortnCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.208.1.6 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatSesValuePortnCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.208.1.7 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatInvSefsPortnCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.208.1.8 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatSefsValuePortnCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.208.1.9 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatInvUasPortnCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.208.1.10 | ||||
| pm200frs02PerfTelecomOutputClientCurrent24StatUasValuePortnCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.208.1.11 |
.1.3.6.1.4.1.20044.90.11.6.240
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomOutputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomOutputClientPast24StatHistoryPort1Table'
List of pm200frs02PerfTelecomOutputClientPast24StatHistory Article
Row definition for the pm200frs02PerfTelecomOutputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomOutputClientPast24StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomOutputClientPast24StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.240.1.1 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryInvCvPort1Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.240.1.2 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryCvValuePort1Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.240.1.3 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryInvEsPort1Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.240.1.4 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryEsValuePort1Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.240.1.5 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryInvSesPort1Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.240.1.6 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistorySesValuePort1Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.240.1.7 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryInvSefsPort1Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.240.1.8 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistorySefsValuePort1Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.240.1.9 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryInvUasPort1Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.240.1.10 | ||||
| pm200frs02PerfTelecomOutputClientPast24StatHistoryUasValuePort1Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.6.240.1.11 |
.1.3.6.1.4.1.20044.90.11.6.848
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfDatacomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfDatacomClientCurrent15StatTable'
List of pm200frs02PerfDatacomClientCurrent15Stat Article
Row definition for the pm200frs02PerfDatacomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfDatacomClientCurrent15StatIndexIndex definition for the pm200frs02PerfDatacomClientCurrent15Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.848.1.1 | ||||
| pm200frs02perfdatacomclientCurrent15StatInCrcCountInvPortnClient Current 15-min Input CRC counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.848.1.4 | ||||
| pm200frs02perfdatacomclientCurrent15StatInCrcCountPortnClient Current 15-min Input CRC counter :This OID gives the current 15-min Input CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.848.1.5 | ||||
| pm200frs02perfdatacomclientCurrent15StatInPacketCountInvPortnClient Current 15-min Input Packet counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.848.1.6 | ||||
| pm200frs02perfdatacomclientCurrent15StatInPacketCountPortnClient Current 15-min Input Packet counter :This OID gives the current 15-min Input Packet counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.848.1.7 | ||||
| pm200frs02perfdatacomclientCurrent15StatOutCrcCountInvPortnClient Current 15-min Output CRC counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.848.1.28 | ||||
| pm200frs02perfdatacomclientCurrent15StatOutCrcCountPortnClient Current 15-min Output CRC counter :This OID gives the current 15-min Output CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.848.1.29 | ||||
| pm200frs02perfdatacomclientCurrent15StatOutPacketCountInvPortnClient Current 15-min Output Packet counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.848.1.30 | ||||
| pm200frs02perfdatacomclientCurrent15StatOutPacketCountPortnClient Current 15-min Output Packet counter :This OID gives the current 15-min Output Packets counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.848.1.31 |
.1.3.6.1.4.1.20044.90.11.6.880
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfDatacomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfDatacomClientPast15StatHistoryPort1Table'
List of pm200frs02PerfDatacomClientPast15StatHistory Article
Row definition for the pm200frs02PerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfDatacomClientPast15StatHistoryPort1IndexIndex definition for the pm200frs02PerfDatacomClientPast15StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.880.1.1 | ||||
| pm200frs02perfdatacomclientPast15StatInCrcCountInvPort1Client Past 15-min Input CRC counter inv. :This OID indicates that the past 15-min Input CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.880.1.4 | ||||
| pm200frs02perfdatacomclientPast15StatInCrcCountPort1Client Past 15-min Input CRC counter :This OID gives the past 15-min Input CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.880.1.5 | ||||
| pm200frs02perfdatacomclientPast15StatInPacketCountInvPort1Client Past 15-min Input Packet counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.880.1.6 | ||||
| pm200frs02perfdatacomclientPast15StatInPacketCountPort1Client Past 15-min Input Packet counter :This OID gives the past 15-min Input Packet counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.880.1.7 | ||||
| pm200frs02perfdatacomclientPast15StatOutCrcCountInvPort1Client Past 15-min Output CRC counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.880.1.28 | ||||
| pm200frs02perfdatacomclientPast15StatOutCrcCountPort1Client Past 15-min Output CRC counter :This OID gives the past 15-min Output CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.880.1.29 | ||||
| pm200frs02perfdatacomclientPast15StatOutPacketCountInvPort1Client Past 15-min Output Packet counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.880.1.30 | ||||
| pm200frs02perfdatacomclientPast15StatOutPacketCountPort1Client Past 15-min Output Packet counter :This OID gives the past 15-min Output Packets counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.880.1.31 |
.1.3.6.1.4.1.20044.90.11.6.912
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfDatacomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfDatacomClientCurrent24StatTable'
List of pm200frs02PerfDatacomClientCurrent24Stat Article
Row definition for the pm200frs02PerfDatacomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfDatacomClientCurrent24StatIndexIndex definition for the pm200frs02PerfDatacomClientCurrent24Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.912.1.1 | ||||
| pm200frs02perfdatacomclientCurrent24StatInCrcCountInvPortnClient Current 24-hours Input CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.912.1.4 | ||||
| pm200frs02perfdatacomclientCurrent24StatInCrcCountPortnClient Current 24-hours Input CRC counter :This OID gives the current 24-hours Input CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.912.1.5 | ||||
| pm200frs02perfdatacomclientCurrent24StatInPacketCountInvPortnClient Current 24-hours Input Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.912.1.6 | ||||
| pm200frs02perfdatacomclientCurrent24StatInPacketCountPortnClient Current 24-hours Input Packet counter :This OID gives the current 24-hours Input Packet counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.912.1.7 | ||||
| pm200frs02perfdatacomclientCurrent24StatOutCrcCountInvPortnClient Current 24-hours Output CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.912.1.28 | ||||
| pm200frs02perfdatacomclientCurrent24StatOutCrcCountPortnClient Current 24-hours Output CRC counter :This OID gives the current 24-hours Output CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.912.1.29 | ||||
| pm200frs02perfdatacomclientCurrent24StatOutPacketCountInvPortnClient Current 24-hours Output Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.912.1.30 | ||||
| pm200frs02perfdatacomclientCurrent24StatOutPacketCountPortnClient Current 24-hours Output Packet counter :This OID gives the current 24-hours Output Packets counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.912.1.31 |
.1.3.6.1.4.1.20044.90.11.6.944
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfDatacomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfDatacomClientPast24StatHistoryPort1Table'
List of pm200frs02PerfDatacomClientPast24StatHistory Article
Row definition for the pm200frs02PerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfDatacomClientPast24StatHistoryPort1IndexIndex definition for the pm200frs02PerfDatacomClientPast24StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.6.944.1.1 | ||||
| pm200frs02perfdatacomclientPast24StatInCrcCountInvPort1Client Past 24-hours Input CRC counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.944.1.4 | ||||
| pm200frs02perfdatacomclientPast24StatInCrcCountPort1Client Past 24-hours Input CRC counter :This OID gives the past 24-hours Input CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.944.1.5 | ||||
| pm200frs02perfdatacomclientPast24StatInPacketCountInvPort1Client Past 24-hours Input Packet counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.944.1.6 | ||||
| pm200frs02perfdatacomclientPast24StatInPacketCountPort1Client Past 24-hours Input Packet counter :This OID gives the past 24-hours Input Packet counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.944.1.7 | ||||
| pm200frs02perfdatacomclientPast24StatOutCrcCountInvPort1Client Past 24-hours Output CRC counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.944.1.28 | ||||
| pm200frs02perfdatacomclientPast24StatOutCrcCountPort1Client Past 24-hours Output CRC counter :This OID gives the past 24-hours Output CRC counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.944.1.29 | ||||
| pm200frs02perfdatacomclientPast24StatOutPacketCountInvPort1Client Past 24-hours Output Packet counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.6.944.1.30 | ||||
| pm200frs02perfdatacomclientPast24StatOutPacketCountPort1Client Past 24-hours Output Packet counter :This OID gives the past 24-hours Output Packets counter value | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.20044.90.11.6.944.1.31 |
.1.3.6.1.4.1.20044.90.11.7.336
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomLinePostFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomLinePostFecCurrent15StatTable'
List of pm200frs02PerfTelecomLinePostFecCurrent15Stat Article
Row definition for the pm200frs02PerfTelecomLinePostFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomLinePostFecCurrent15StatIndexIndex definition for the pm200frs02PerfTelecomLinePostFecCurrent15Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.336.1.1 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatInvCvPortnCurrent 15-min EBC counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.336.1.2 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatCvValuePortnCurrent 15-min EBC counter :This OID gives the current 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.336.1.3 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatInvEsPortnCurrent 15-min ES counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.336.1.4 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatEsValuePortnCurrent 15-min ES counter :This OID gives the current 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.336.1.5 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatInvSesPortnCurrent 15-min SES counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.336.1.6 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatSesValuePortnCurrent 15-min SES counter :This OID gives the current 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.336.1.7 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatInvSefsPortnCurrent 15-min SEFS counter inv. :This OID indicates that the current 15-min severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.336.1.8 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatSefsValuePortnCurrent 15-min SEFS counter :This OID gives the current 15-min severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.336.1.9 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatInvUasPortnCurrent 15-min UAS counter inv. :This OID indicates that the current 15-min UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.336.1.10 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent15StatUasValuePortnCurrent 15-min UAS counter :This OID gives the current 15-min UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.336.1.11 |
.1.3.6.1.4.1.20044.90.11.7.337
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomLinePostFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomLinePostFecPast15StatHistoryPort1Table'
List of pm200frs02PerfTelecomLinePostFecPast15StatHistory Article
Row definition for the pm200frs02PerfTelecomLinePostFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomLinePostFecPast15StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.337.1.1 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryInvCvPort1Previous 15-min EBC counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.337.1.2 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryCvValuePort1Previous 15-min EBC counter :This OID gives the previous 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.337.1.3 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryInvEsPort1Previous 15-min ES counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.337.1.4 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryEsValuePort1Previous 15-min ES counter :This OID gives the previous 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.337.1.5 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryInvSesPort1Previous 15-min SES counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.337.1.6 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistorySesValuePort1Previous 15-min SES counter :This OID gives the previous 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.337.1.7 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryInvSefsPort1Previous 15-min SEFS counter inv. :This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.337.1.8 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistorySefsValuePort1Previous 15-min SEFS counter :This OID gives the previous 15-min severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.337.1.9 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryInvUasPort1Previous 15-min UAS counter inv. :This OID indicates that the previous 15-min UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.337.1.10 | ||||
| pm200frs02PerfTelecomLinePostFecPast15StatHistoryUasValuePort1Previous 15-min UAS counter :This OID gives the previous 15-min UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.337.1.11 |
.1.3.6.1.4.1.20044.90.11.7.338
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomLinePostFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomLinePostFecCurrent24StatTable'
List of pm200frs02PerfTelecomLinePostFecCurrent24Stat Article
Row definition for the pm200frs02PerfTelecomLinePostFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomLinePostFecCurrent24StatIndexIndex definition for the pm200frs02PerfTelecomLinePostFecCurrent24Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.338.1.1 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatInvCvPortnCurrent 24-hours EBC counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.338.1.2 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatCvValuePortnCurrent 24-hours EBC counter :This OID gives the current 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.338.1.3 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatInvEsPortnCurrent 24-hours ES counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.338.1.4 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatEsValuePortnCurrent 24-hours ES counter :This OID gives the current 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.338.1.5 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatInvSesPortnCurrent 24-hours SES counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.338.1.6 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatSesValuePortnCurrent 24-hours SES counter :This OID gives the current 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.338.1.7 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatInvSefsPortnCurrent 24-hours SEFS counter inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.338.1.8 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatSefsValuePortnCurrent 24-hours SEFS counter :This OID gives the current 24-hours severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.338.1.9 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatInvUasPortnCurrent 24-hours UAS counter inv. :This OID indicates that the current 24-hours UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.338.1.10 | ||||
| pm200frs02PerfTelecomLinePostFecCurrent24StatUasValuePortnCurrent 24-hours UAS counter :This OID gives the current 24-hours UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.338.1.11 |
.1.3.6.1.4.1.20044.90.11.7.339
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomLinePostFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomLinePostFecPast24StatHistoryPort1Table'
List of pm200frs02PerfTelecomLinePostFecPast24StatHistory Article
Row definition for the pm200frs02PerfTelecomLinePostFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomLinePostFecPast24StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.339.1.1 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryInvCvPort1Previous 24-hours EBC counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.339.1.2 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryCvValuePort1Previous 24-hours EBC counter :This OID gives the previous 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.339.1.3 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryInvEsPort1Previous 24-hours ES counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.339.1.4 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryEsValuePort1Previous 24-hours ES counter :This OID gives the previous 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.339.1.5 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryInvSesPort1Previous 24-hours SES counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.339.1.6 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistorySesValuePort1Previous 24-hours SES counter :This OID gives the previous 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.339.1.7 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryInvSefsPort1Previous 24-hours SEFS counter inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.339.1.8 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistorySefsValuePort1Previous 24-hours SEFS counter :This OID gives the previous 24-hours severely Errored Framing Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.339.1.9 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryInvUasPort1Previous 24-hours UAS counter inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.339.1.10 | ||||
| pm200frs02PerfTelecomLinePostFecPast24StatHistoryUasValuePort1Previous 24-hours UAS counter :This OID gives the previous 24-hours UnAvailable Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.339.1.11 |
.1.3.6.1.4.1.20044.90.11.7.352
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomBerLinePreFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomBerLinePreFecCurrent15StatTable'
List of pm200frs02PerfTelecomBerLinePreFecCurrent15Stat Article
Row definition for the pm200frs02PerfTelecomBerLinePreFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomBerLinePreFecCurrent15StatIndexIndex definition for the pm200frs02PerfTelecomBerLinePreFecCurrent15Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.352.1.1 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent15StatInvBerPortnCurrent 15-min BER counter inv. :This OID indicates that the current 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.352.1.2 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent15StatBerValuePortnCurrent 15-min BER counter :This OID gives the current 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.352.1.3 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent15StatInvMinBerPortnCurrent 15-min MinBER counter inv. :This OID indicates that the current 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.352.1.4 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent15StatMinBerValuePortnCurrent 15-min MinBER counter :This OID gives the current 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.352.1.5 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent15StatInvMaxBerPortnCurrent 15-min MaxBER counter inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.352.1.6 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent15StatMaxBerValuePortnCurrent 15-min MaxBER counter :This OID gives the current 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.352.1.7 |
.1.3.6.1.4.1.20044.90.11.7.353
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryPort1Table'
List of pm200frs02PerfTelecomBerLinePreFecPast15StatHistory Article
Row definition for the pm200frs02PerfTelecomBerLinePreFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomBerLinePreFecPast15StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.353.1.1 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryInvBerPort1Previous 15-min BER counter inv. :This OID indicates that the previous 15-min Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.353.1.2 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryBerValuePort1Previous 15-min BER counter :This OID gives the previous 15-min Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.353.1.3 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryInvMinBerPort1Previous 15-min MinBER counter inv. :This OID indicates that the previous 15-min Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.353.1.4 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryMinBerValuePort1Previous 15-min MinBER counter :This OID gives the previous 15-min Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.353.1.5 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryInvMaxBerPort1Previous 15-min MaxBER counter inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.353.1.6 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast15StatHistoryMaxBerValuePort1Previous 15-min MaxBER counter :This OID gives the previous 15-min severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.353.1.7 |
.1.3.6.1.4.1.20044.90.11.7.354
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomBerLinePreFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomBerLinePreFecCurrent24StatTable'
List of pm200frs02PerfTelecomBerLinePreFecCurrent24Stat Article
Row definition for the pm200frs02PerfTelecomBerLinePreFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomBerLinePreFecCurrent24StatIndexIndex definition for the pm200frs02PerfTelecomBerLinePreFecCurrent24Stat table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.354.1.1 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent24StatInvBerPortnCurrent 24-hours BER counter inv. :This OID indicates that the current 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.354.1.2 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent24StatBerValuePortnCurrent 24-hours BER counter :This OID gives the current 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.354.1.3 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent24StatInvMinBerPortnCurrent 24-hoursMinBER counter inv. :This OID indicates that the current 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.354.1.4 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent24StatMinBerValuePortnCurrent 24-hours MinBER counter :This OID gives the current 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.354.1.5 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent24StatInvMaxBerPortnCurrent 24-hours MaxBER counter inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.354.1.6 | ||||
| pm200frs02PerfTelecomBerLinePreFecCurrent24StatMaxBerValuePortnCurrent 24-hours MaxBER counter :This OID gives the current 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.354.1.7 |
.1.3.6.1.4.1.20044.90.11.7.355
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200frs02-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200frs02-MIB::pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryPort1Table'
List of pm200frs02PerfTelecomBerLinePreFecPast24StatHistory Article
Row definition for the pm200frs02PerfTelecomBerLinePreFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryPort1IndexIndex definition for the pm200frs02PerfTelecomBerLinePreFecPast24StatHistory table | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.20044.90.11.7.355.1.1 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryInvBerPort1Previous 24-hours BER counter inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.355.1.2 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryBerValuePort1Previous 24-hours BER counter :This OID gives the previous 24-hours Coding Violation counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.355.1.3 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryInvMinBerPort1Previous 24-hours MinBER counter inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.355.1.4 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryMinBerValuePort1Previous 24-hours MinBER counter :This OID gives the previous 24-hours Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.355.1.5 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryInvMaxBerPort1Previous 24-hours MaxBER counter inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid | EKINOPS-MIBEkiOnOff Type Values:
| .1.3.6.1.4.1.20044.90.11.7.355.1.6 | ||||
| pm200frs02PerfTelecomBerLinePreFecPast24StatHistoryMaxBerValuePort1Previous 24-hours MaxBER counter :This OID gives the previous 24-hours severely Errored Second counter value | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.20044.90.11.7.355.1.7 |