EKINOPS-Pm200fr20-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
91
Rows
91
Columns
478
.1.3.6.1.4.1.20044.87.2.2.1.272
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmclientSfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmclientSfpWarnDdmTable'
List of pm200fr20AlmclientSfpWarnDdm Article
Row definition for the pm200fr20AlmclientSfpWarnDdm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmclientSfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.2.1.272.1.1 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.2 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.3 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.4 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.5 |
||||
|
Client Trscv Power Supply Low
Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.6 |
||||
|
Client Trscv Power Supply High
Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.7 |
||||
|
Client Trscv Temp Low Warning
:This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.8 |
||||
|
Client Trscv Temp High Warning
:This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.9 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.16 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.1.272.1.17 |
.1.3.6.1.4.1.20044.87.2.2.2.152
·
1 row entry
·
15 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmclientHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmclientHostLaneFaultTable'
List of pm200fr20AlmclientHostLaneFault Article
Row definition for the pm200fr20AlmclientHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmclientHostLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.2.2.152.1.1 |
||||
|
Client Frame Alignment Loss :This
OID indicates the module is not aligned with the incoming Client signal <Help> Alarm indicating the module is not aligned with the incoming client signal <Condtype> CLIENT_LOSS_OF… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates a Loss of Signal is detected on the Client Trscv <Help> Alarm indicating a Loss of Signal is detected on the Client Trscv <Condtype> CLIENT_INPUT_LOSS_OF_SIG <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.3 |
||||
|
Client Lanes Marker Unlock :This
OID indicates the Client lanes marker alignment is not lock <Help> Alarm indicating the Client lanes marker alignment is not lock <Condtype> CLIENT_LANES_MARKER_UNLOCK <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.4 |
||||
|
Client Lanes 64/66b Unlock :This
OID indicates the Client 64/66b decoder is not lock <Help> Alarm indicating the Client 64/66b decoder is not lock <Condtype> CLIENT_LANES_64_66_UNLOCK <Probcause> receiveFailure (41… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.5 |
||||
|
Client Lanes Not Aligned :This
OID indicates the Client lanes are not aligned <Help> Alarm indicating the Client lanes are not aligned <Condtype> CLIENT_LANES_NOT_ALIGNED <Probcause> receiveFailure (41) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.6 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.7 |
||||
|
Client Host Lane Tx Loss Of Lock
:This OID indicates a Tx Loss of Lock on the Client Trscv Host Lane <Help> Alarm indicating a Tx Loss of Lock on the Client Trscv Host Lane <Condtype> CLIENT_TX_HOST_LOL <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.10 |
||||
|
Client Host Lane Tx FIFO Error
:This OID indicates a Tx FIFO Error on the Client Trscv Host Lane <Help> Alarm indicating a Tx FIFO Error on the Client Trscv Host Lane <Condtype> CLIENT_LANE_TX_FIFO_ERROR <Probcause… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.11 |
||||
|
Local Fault Signal Detected :This
OID indicates a Local Fault Signal is detected on the client input port<Help> This alarm indicates a Local Fault Signal is detected on the client input port <Condtype> LF_DETECTED… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.12 |
||||
|
Remote Fault Signal Detected :This
OID indicates a Remote Fault Signal is detected on the client input port<Help> This alarm indicates a Remote Fault Signal is detected on the client input port <Condtype> RF_DETEC… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.13 |
||||
|
STM64 Protocol Detected :This
OID indicates a STM64 Protocol detected on the Client Port <Help> Status indicating a STM64 protocol received on the Client side <Condtype> STM64_PROTOC_DETECTED <Probcause> informati… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.14 |
||||
|
10GbE Protocol Detected :This
OID indicates a 10GbE Protocol detected on the Client Port <Help> Status indicating a 10GbE protocol received on the Client side <Condtype> 10GBE_PROTOC_DETECTED <Probcause> informati… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.15 |
||||
|
OTU2 Protocol Detected :This OID
indicates an OTU2 Protocol detected on the Client Port <Help> Status indicating a OTU2 protocol received on the Client side <Condtype> OTU2_PROTOC_DETECTED <Probcause> informationa… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.16 |
||||
|
OTU2e Protocol Detected :This
OID indicates an OTU2e Protocol detected on the Client Port <Help> Status indicating a OTU2e protocol received on the Client side <Condtype> OTU2E_PROTOC_DETECTED <Probcause> informa… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.152.1.17 |
.1.3.6.1.4.1.20044.87.2.2.2.240
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmclientSfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmclientSfpAlmDdmTable'
List of pm200fr20AlmclientSfpAlmDdm Article
Row definition for the pm200fr20AlmclientSfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmclientSfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.2.2.240.1.1 |
||||
|
Client Trscv Tx Power Low :This
OID indicates that the Trscv output power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is lower … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.2 |
||||
|
Client Trscv Tx Power High :This
OID indicates that the Trscv output power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv output power of port is high… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.3 |
||||
|
Client Trscv Bias Low :This OID
indicates that the Trscv laser bias current of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port i… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.4 |
||||
|
Client Trscv Bias High :This OID
indicates that the Trscv laser bias current of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv laser bias current of port… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.5 |
||||
|
Client Trscv Power Supply Low
:This OID indicates that the Trscv power supply of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is lo… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.6 |
||||
|
Client Trscv Power Supply High
:This OID indicates that the Trscv power supply of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv power supply of port is … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.7 |
||||
|
Client Trscv Temp Low :This OID
indicates that the Trscv temperature of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.8 |
||||
|
Client Trscv Temp High :This OID
indicates that the Trscv temperature of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv temperature of port is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.9 |
||||
|
Client Trscv Rx Power Low :This
OID indicates that the Trscv input power of port is lower than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.16 |
||||
|
Client Trscv Rx Power High :This
OID indicates that the Trscv input power of port is higher than the threshold value written in the Trscv EEPROM <Help> Alarm indicating that the Trscv input power of port is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.240.1.17 |
.1.3.6.1.4.1.20044.87.2.2.2.304
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmclientOtnAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmclientOtnAlmTable'
List of pm200fr20AlmclientOtnAlm Article
Row definition for the pm200fr20AlmclientOtnAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmclientOtnAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.2.2.304.1.1 |
||||
|
DLOM :This OID indicates that
a Loss Of Multiframe has been detected on client port<Help> This alarm indicates if a Loss Of Multiframe has been detected on the client port <Condtype> CLIENT_OTU2E_DLOM <Probcause>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.2.304.1.2 |
.1.3.6.1.4.1.20044.87.2.2.3.8
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmsynthAlmPortTable'
List of pm200fr20AlmsynthAlmPort Article
Row definition for the pm200fr20AlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.2.3.8.1.1 |
||||
|
Client Optical Module Absent :This
OID indicates that the Transceiver is not present in the client port. <Help> This alarm indicates if the client transceiver is not plugged <Condtype> SFP_ABSENT_1 <Probcause> inp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.2 |
||||
|
DDM Supported On Client Trscv
:This OID indicates that the Client transceiver supports the Digital Diagnostic Monitoring function <Help> This status indicates if the client transceiver includes the DDM feature <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Help> This alarm indicates a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.5 |
||||
|
Client Trscv Laser Shutdown :This
OID indicates the Client transceiver laser is shutdown <Help> This status indicates if the client transceiver laser is shutdown <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.6 |
||||
|
Local Client Port In Service :This
OID indicates that the local Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local client port is in service <Condtype> CLIENT_LOCAL_OOS <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.7 |
||||
|
Remote Client Port In Service
:This OID indicates that the remote Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the remote client port is in service <Condtype> CLIENT_REMOTE_O… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indicates if a Client Alarm Indication Signal is currently inserted on the client interface <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.9 |
||||
|
Warning On Client Trscv DDM :This
OID indicates a warning is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the client transceiver <Condtype> SFP_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.10 |
||||
|
Alarm On Client Trscv DDM :This
OID indicates an alarm is being received from the Client Transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the client transceiver <Condtype> SFP_DDM_AL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.11 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Help> This alarm indicates a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.13 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client po… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.87.2.3.1.104
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmlineQsfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmlineQsfpWarnDdmTable'
List of pm200fr20AlmlineQsfpWarnDdm Article
Row definition for the pm200fr20AlmlineQsfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmlineQsfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.3.1.104.1.1 |
||||
|
Client Trscv Tx Power Low Warning
:This OID indicates that the Trscv output power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is lower than t… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.2 |
||||
|
Client Trscv Tx Power High Warning
:This OID indicates that the Trscv output power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv output power is higher tha… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.3 |
||||
|
Client Trscv Bias Low Warning
:This OID indicates that the Trscv laser bias current is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is lowe… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.4 |
||||
|
Client Trscv Bias High Warning
:This OID indicates that the Trscv laser bias current is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv laser bias current is hi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.5 |
||||
|
Client Trscv Power Supply Low
Warning :This OID indicates that the Trscv power supply is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is lower th… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.6 |
||||
|
Client Trscv Power Supply High
Warning :This OID indicates that the Trscv power supply is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv power supply is higher… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.7 |
||||
|
Client Trscv Temp Low Warning
:This OID indicates that the Trscv temperature is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is lower than the thr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.8 |
||||
|
Client Trscv Temp High Warning
:This OID indicates that the Trscv temperature is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv temperature is higher than the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.9 |
||||
|
Client Trscv Rx Power Low Warning
:This OID indicates that the Trscv input power is lower than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is lower than the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.16 |
||||
|
Client Trscv Rx Power High Warning
:This OID indicates that the Trscv input power is higher than the threshold value written in the Trscv EEPROM <Help> Warning indicating that the Trscv input power is higher than … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.1.104.1.17 |
.1.3.6.1.4.1.20044.87.2.3.2.196
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmlineHostLaneFaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmlineHostLaneFaultTable'
List of pm200fr20AlmlineHostLaneFault Article
Row definition for the pm200fr20AlmlineHostLaneFault
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmlineHostLaneFault
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.3.2.196.1.1 |
||||
|
Line Input Loss Of Signal :This
OID indicates a Loss of Signal is detected on the Line Trscv <Help> Alarm indicating a Loss of Signal is detected on the Line Trscv <Condtype> LINE_INPUT_LOSS_OF_SIGNAL <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.2 |
||||
|
Line Loss Of Frame :This OID indicates
the module is not aligned with the incoming Line signal <Help> Alarm indicating the module is not aligned with the incoming Line signal <Condtype> LINE_LOSS_OF_FRAME <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.3 |
||||
|
Line SM BDI Inserted :This OID
indicates a SM Backward Defect Indication is inserted on the outgoing Line signal <Help> Status indicating a SM Backward Defect Indication is inserted on the outgoing Line signal <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.4 |
||||
|
Line SM BDI Detected :This OID
indicates a SM Backward Defect Indication is detected on the incoming Line signal <Help> Alarm indicating a SM Backward Defect Indication is detected on the incoming Line signal <Con… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.5 |
||||
|
Line SM IAE Inserted :This OID
indicates a SM Incoming Alignment Error is inserted on the outgoing Line signal <Help> Status indicating a SM Incoming Alignment Error is inserted on the outgoing Line signal <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.6 |
||||
|
Line SM IAE Detected :This OID
indicates a SM Incoming Alignment Error is detected on the incoming Line signal <Help> Alarm indicating a SM Incoming Alignment Error is detected on the incoming Line signal <Condtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.7 |
||||
|
OTU4 DDEG :This OID indicates
that a Signal Degrade has been detected on line port <Help> This alarm indicates if a Signal Degrade has been detected upon threshold and confirmation parameters on the line port <Co… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.8 |
||||
|
OTU4 DTIM :This OID indicates
that a Trace Identifier Mismatch has been detected on line port <Help> This alarm indicates if a Trace Identifier Mismatch has been detected on the line port <Condtype> CLIENT_OTU4_D… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.9 |
||||
|
Ochr4 - DLOS-P :This OID indicates
that a Transmitter failure has been detected on line port <Help> This alarm indicates if a Transmitter Failure has been detected on the line port <Condtype> LINE_OCHR4_DLOS_P <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.12 |
||||
|
OTU4 DLOM :This OID indicates
that a Loss Of Multiframe has been detected on line port <Help> This alarm indicates if a Loss Of Multiframe has been detected on the line port <Condtype> LINE_OTU4_DLOM <Probcause> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.196.1.17 |
.1.3.6.1.4.1.20044.87.2.3.2.208
·
1 row entry
·
12 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmlineOdu4AlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmlineOdu4AlmTable'
List of pm200fr20AlmlineOdu4Alm Article
Row definition for the pm200fr20AlmlineOdu4Alm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmlineOdu4Alm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.3.2.208.1.1 |
||||
|
ODU4 DPLM :This OID indicates
a Payload Mismatch is detected on the line port<Help> Alarm indicating a Payload Mismatch <Condtype> LINE_ODU4_DPLM <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Pol… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.4 |
||||
|
ODU4 DDEG :This OID indicates
that a Signal Degrade has been detected on line port<Help> Alarm indicating a Signal Degrade upon threshold and confirmation parameters <Condtype> LINE_ODU4_DDEG <Probcause> degradedS… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.6 |
||||
|
ODU4 IAIS :This OID indicates
that an Alarm Indication Signal has been inserted on line port <Help> This alarm indicates if an Alarm Indication Signal has been inserted on the line port <Condtype> LINE_ODU4_IAIS … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.8 |
||||
|
ODU4 DTIM :This OID indicates
that a Trace Identifier Mismatch has been detected on line port<Help> This alarm indicates if an Trace Identifier Mismatch has been detected on the line port <Condtype> LINE_ODU4_DTIM… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.9 |
||||
|
ODU4 DAIS :This OID indicates
that a Alarm Indication SIgnal has been detected on line port<Help> This alarm indicates if an Alarm Indication Signal has been detected on the line port <Condtype> LINE_ODU4_DAIS <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.10 |
||||
|
ODU4 IOCI :This OID indicates
that an Open Connection has been inserted on line port <Help> This alarm indicates if an Open Connection Indication has been inserted on the line port <Condtype> LINE_ODU4_IOCI <Prob… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.12 |
||||
|
ODU4 DOCI :This OID indicates
that a Open Connection has been detected on line port <Help> This alarm indicates if an Open Connection Indication has been detected on the line port <Condtype> LINE_ODU4_DOCI <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.13 |
||||
|
ODU4 IBDI :This OID indicates
that a Backward Defect Indication has been inserted on line port <Help> This alarm indicates if a Backward Defect Indication has been inserted on the line port <Condtype> LINE_ODU4_I… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.14 |
||||
|
ODU4 DBDI :This OID indicates
that a Backward Defect Indication has been detected on line port<Help> This alarm indicates if a Backward Defect Indication has been detected on the line port <Condtype> LINE_ODU4_DBD… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.15 |
||||
|
ODU4 ILCK :This OID indicates
that a Locked Indication has been inserted on line port <Help> This alarm indicates if a Locked Indication has been inserted on the line port <Condtype> LINE_ODU4_ILCK <Probcause> ot… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.16 |
||||
|
ODU4 DLCK :This OID indicates
that a Locked Indication has been detected on line port <Help> This alarm indicates if a Locked Indication has been detected on the line port <Condtype> LINE_ODU4_DLCK <Probcause> ot… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.2.208.1.17 |
.1.3.6.1.4.1.20044.87.2.3.3.40
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20AlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20AlmsynthAlmLineTable'
List of pm200fr20AlmsynthAlmLine Article
Row definition for the pm200fr20AlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20AlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.2.3.3.40.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface is not present. <Help> This alarm indicates if the line transceiver is not plugged <Condtype> XFP_ABSENT <Probcause> inputOutputDeviceE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_NOT_COMPL <Probc… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Help> This alarm indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <P… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.5 |
||||
|
Line Trscv Laser Shutdown :This
OID indicates the Line transceiver laser is shutdown <Help> This status indicates if the Line transceiver laser is shutdown <Condtype> XFP_TX_OFF <Probcause> other (1) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informationalSt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.7 |
||||
|
MS-RDI/L-RDI Inserted On Line
:This OID indicates an upstream MS-RDI/L-RDI has been inserted in the outgoing 10 Gb/s SDH/SONET signal. <Help> This status indicates if a MS-RDI/L-RDI is currently inserted on the li… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.9 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condtype> LINE… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line transceiver DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> LINE_DDM_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.11 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Help> This alarm indicates a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.2.3.3.40.1.13 |
.1.3.6.1.4.1.20044.87.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrclientTxTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrclientTxTempTable'
List of pm200fr20MesrclientTxTemp Article
Row definition for the pm200fr20MesrclientTxTemp
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrclientTxTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.2.16.1.1 |
|
Client Trscv Temperature :This
OID gives the Laser temperature value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV_S16/256) (Unit = C) <Help> This Measure gives the… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.2.16.1.2 |
.1.3.6.1.4.1.20044.87.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrclientTxBiasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrclientTxBiasTable'
List of pm200fr20MesrclientTxBias Article
Row definition for the pm200fr20MesrclientTxBias
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrclientTxBias
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.2.48.1.1 |
|
Client Trscv Laser Bias :This
OID gives the Laser bias value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV_U16/500) (Unit = mA) <Help> This Measure gives the Laser bias va… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.2.48.1.2 |
.1.3.6.1.4.1.20044.87.3.2.80
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrclientTxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrclientTxPwrTable'
List of pm200fr20MesrclientTxPwr Article
Row definition for the pm200fr20MesrclientTxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrclientTxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.2.80.1.1 |
|
Client Trscv Tx Power :This OID
gives the transmit power value of the Client Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16)-40) (Unit = dBm) <Help> This Measure gives the tr… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.2.80.1.2 |
.1.3.6.1.4.1.20044.87.3.2.112
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrclientRxPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrclientRxPwrTable'
List of pm200fr20MesrclientRxPwr Article
Row definition for the pm200fr20MesrclientRxPwr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrclientRxPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.2.112.1.1 |
|
Client Trscv Rx Power :This OID
gives the receive power value of the Client Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV_U16)-40) (Unit = dBm) <Help> This Measure gives the recei… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.2.112.1.2 |
.1.3.6.1.4.1.20044.87.3.3.144
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineNetTxLaserOutputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineNetTxLaserOutputPwrTable'
List of pm200fr20MesrlineNetTxLaserOutputPwr Article
Row definition for the pm200fr20MesrlineNetTxLaserOutputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineNetTxLaserOutputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.144.1.1 |
|
Current Line Trscv Tx Power :This
OID gives the Tx Laser transmit power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Tx… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.144.1.2 |
.1.3.6.1.4.1.20044.87.3.3.148
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineNetTxLaserTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineNetTxLaserTempTable'
List of pm200fr20MesrlineNetTxLaserTemp Article
Row definition for the pm200fr20MesrlineNetTxLaserTemp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineNetTxLaserTemp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.148.1.1 |
|
Current Line Trscv Tx Laser Temperature
:This OID gives the Tx Laser Temperature value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This Measur… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.148.1.2 |
.1.3.6.1.4.1.20044.87.3.3.152
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineNetTxBiasCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineNetTxBiasCurrentTable'
List of pm200fr20MesrlineNetTxBiasCurrent Article
Row definition for the pm200fr20MesrlineNetTxBiasCurrent
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineNetTxBiasCurrent
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.152.1.1 |
|
Current Line Trscv Tx Laser Bias
:This OID gives the Tx Laser Bias value of the Line Transceiver, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/10) (Unit = mA) <Help> This Measure gives the Tx Laser… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.152.1.2 |
.1.3.6.1.4.1.20044.87.3.3.156
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineNetRxInputPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineNetRxInputPwrTable'
List of pm200fr20MesrlineNetRxInputPwr Article
Row definition for the pm200fr20MesrlineNetRxInputPwr
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineNetRxInputPwr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.156.1.1 |
|
Current Line Trscv Rx Power :This
OID gives the Receive power value of the Line Transceiver, read in the DDM (Digital Diagnostic Monitoring) (Power = AV/100) (Unit = dBm) <Help> This Measure gives the Receive powe… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.156.1.2 |
.1.3.6.1.4.1.20044.87.3.3.160
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineResidualChromaticDispTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineResidualChromaticDispTable'
List of pm200fr20MesrlineResidualChromaticDisp Article
Row definition for the pm200fr20MesrlineResidualChromaticDisp
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineResidualChromaticDisp
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.160.1.1 |
|
Current Residual Chromatic Dispersion
:This OID gives the current Residual Chromatic Dispersion on the Line interface (Unit = ps/nm)<Help> This measure gives the current Residual Chromatic Dispersion on the Line … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.160.1.2 |
.1.3.6.1.4.1.20044.87.3.3.164
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineDiffGroupDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineDiffGroupDelayTable'
List of pm200fr20MesrlineDiffGroupDelay Article
Row definition for the pm200fr20MesrlineDiffGroupDelay
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineDiffGroupDelay
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.164.1.1 |
|
Current Differential Group Delay
:This OID gives the current Differential Group Delay on the Line interface (Unit = ps)<Help> This measure gives the current Differential Group Delay on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.164.1.2 |
.1.3.6.1.4.1.20044.87.3.3.168
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineQFactorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineQFactorTable'
List of pm200fr20MesrlineQFactor Article
Row definition for the pm200fr20MesrlineQFactor
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineQFactor
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.168.1.1 |
|
Current Q Factor :This OID gives
the current Q Factor on the Line interface (Unit = dB) <Help> This measure gives the current Q Factor on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.168.1.2 |
.1.3.6.1.4.1.20044.87.3.3.172
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineCarrierFreqOffsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineCarrierFreqOffsetTable'
List of pm200fr20MesrlineCarrierFreqOffset Article
Row definition for the pm200fr20MesrlineCarrierFreqOffset
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineCarrierFreqOffset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.172.1.1 |
|
Current Carrier Frequency Offset
:This OID gives the current Carrier Frequency Offset on the Line interface (Unit = Mhz)<Help> This measure gives the current Carrier Frequency Offset on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.172.1.2 |
.1.3.6.1.4.1.20044.87.3.3.176
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MesrlineOsnrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MesrlineOsnrTable'
List of pm200fr20MesrlineOsnr Article
Row definition for the pm200fr20MesrlineOsnr
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm200fr20MesrlineOsnr
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.3.3.176.1.1 |
|
Current OSNR :This OID gives the
current OSNR on the Line interface (OSNR = AV/10) (Unit = dB)<Help> This measure gives the current OSNR on the Line interface. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.87.3.3.176.1.2 |
.1.3.6.1.4.1.20044.87.4.2.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntclientInputErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntclientInputErrorCounterTable'
List of pm200fr20CntclientInputErrorCounter Article
Row definition for the pm200fr20CntclientInputErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntclientInputErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.2.112.1.1 |
||||
|
Client Input Errors :This counter
is increased each time a 10b/8b running disparity error is detected on the Client input stream <Help> This counter gives the number of errors on the client port (FCS errors for … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.4.2.112.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the client error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.2.112.1.3 |
||||
|
Client Counter Overload :This
OID when set indicates a client input error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.2.112.1.4 |
.1.3.6.1.4.1.20044.87.4.2.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntclientCbipCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntclientCbipCounterTable'
List of pm200fr20CntclientCbipCounter Article
Row definition for the pm200fr20CntclientCbipCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntclientCbipCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.2.144.1.1 |
||||
|
Client Output Errors :This counter
is incremented each time a CBIP parity error is detected on the Client output stream <Help> This counter gives the number of errors on the client port (FCS errors for 10GbE and… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.4.2.144.1.2 |
||||
|
Client Counter Error :This OID
when set indicates the CBIP error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.2.144.1.3 |
||||
|
Client CBIP Counter Overload :This
OID when set indicates a CBIP error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.2.144.1.4 |
.1.3.6.1.4.1.20044.87.4.3.192
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntlocalLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntlocalLineSmBip8ErrorCounterTable'
List of pm200fr20CntlocalLineSmBip8ErrorCounter Article
Row definition for the pm200fr20CntlocalLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntlocalLineSmBip8ErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.192.1.1 |
||||
|
Uncorrected SD FEC Errors :This
OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.192.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.192.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.192.1.4 |
.1.3.6.1.4.1.20044.87.4.3.193
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntlocalLineFecCorrectedErrorsCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntlocalLineFecCorrectedErrorsCounterTable'
List of pm200fr20CntlocalLineFecCorrectedErrorsCounter Article
Row definition for the pm200fr20CntlocalLineFecCorrectedErrorsCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntlocalLineFecCorrectedErrorsCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.193.1.1 |
||||
|
Line Input HD FEC Corrected Errors
:This OID gives the current Bit Error Rate before the Hard Decision FEC <Help> This counter gives the current Bit Error Rate before the Hard Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.193.1.2 |
||||
|
FEC Counter Error :This bit when
set indicates the FEC corrected errors counter value is invalid on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.193.1.3 |
||||
|
FEC Counter Overload :This bit
when set indicates a FEC corrected errors counter overload on Line |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.193.1.4 |
.1.3.6.1.4.1.20044.87.4.3.194
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntremoteLineSmBip8ErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntremoteLineSmBip8ErrorCounterTable'
List of pm200fr20CntremoteLineSmBip8ErrorCounter Article
Row definition for the pm200fr20CntremoteLineSmBip8ErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntremoteLineSmBip8ErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.194.1.1 |
||||
|
Remote SM BIP8 :This OID gives
the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remote side <Help> This counter gives the current Bit Error Rate (residual SM-BIP8 error) after FEC on the remot… |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.194.1.2 |
||||
|
Remote Counter Error :
|
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.194.1.3 |
||||
|
Remote Counter Overload :
|
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.194.1.4 |
.1.3.6.1.4.1.20044.87.4.3.195
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntlineDfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntlineDfrmTimCntTable'
List of pm200fr20CntlineDfrmTimCnt Article
Row definition for the pm200fr20CntlineDfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntlineDfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.195.1.1 |
||||
|
Line Timer Counter :
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.195.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.195.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.195.1.4 |
.1.3.6.1.4.1.20044.87.4.3.196
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntlocalLineTrscvPreSdFecErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntlocalLineTrscvPreSdFecErrorCounterTable'
List of pm200fr20CntlocalLineTrscvPreSdFecErrorCounter Article
Row definition for the pm200fr20CntlocalLineTrscvPreSdFecErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntlocalLineTrscvPreSdFecErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.196.1.1 |
||||
|
Pre-SD FEC Errors :This OID gives
the current Bit Error Rate before the Soft Decision FEC <Help> This counter gives the current Bit Error Rate before the Soft Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.196.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.196.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.196.1.4 |
.1.3.6.1.4.1.20044.87.4.3.197
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounterTable'
List of pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounter Article
Row definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecErrorCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.197.1.1 |
||||
|
Uncorrected SD FEC Errors :This
OID gives the current Bit Error Rate after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Error Rate after the Soft Decision FEC (residual) |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.197.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.197.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.197.1.4 |
.1.3.6.1.4.1.20044.87.4.3.198
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntlocalLineTrscvPreSdFecBitCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntlocalLineTrscvPreSdFecBitCounterTable'
List of pm200fr20CntlocalLineTrscvPreSdFecBitCounter Article
Row definition for the pm200fr20CntlocalLineTrscvPreSdFecBitCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntlocalLineTrscvPreSdFecBitCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.198.1.1 |
||||
|
Pre-SD FEC Bit Counter :This OID
gives the current Bit count before the Soft Decision FEC <Help> This counter gives the current Bit Count before the Soft Decision FEC |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.198.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.198.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.198.1.4 |
.1.3.6.1.4.1.20044.87.4.3.199
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounterTable'
List of pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounter Article
Row definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounter
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CntlocalLineTrscvUncorrectedSdFecBitCounter
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.4.3.199.1.1 |
||||
|
Uncorrected SD FEC Bit Counter
:This OID gives the current Bit count after the Soft Decision FEC (residual) <Help> This counter gives the current Bit Count after the Soft Decision FEC (residual) |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.4.3.199.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.199.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.4.3.199.1.4 |
.1.3.6.1.4.1.20044.87.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlaccessLoopTable'
List of pm200fr20CtrlaccessLoop Article
Row definition for the pm200fr20CtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID, when set at '1' puts the client port in loopback, looping the received 10 Gb/s signal on the transmit 10 Gb/s output. <Help> This control enables the Out Loopback on the client… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.2.16.1.2 |
.1.3.6.1.4.1.20044.87.6.2.17
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlclientLoopToLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlclientLoopToLineTable'
List of pm200fr20CtrlclientLoopToLine Article
Row definition for the pm200fr20CtrlclientLoopToLine
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlclientLoopToLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.2.17.1.1 |
||||
|
Client Terminal Loopback :This
OID, when set, puts the client port in loop back, looping the 10 Gb/s output signal on the 10 Gb/s input.<Help> This control enables the In Loopback on the client port, looping the c… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.2.17.1.2 |
.1.3.6.1.4.1.20044.87.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlcsfUpInsTable'
List of pm200fr20CtrlcsfUpIns Article
Row definition for the pm200fr20CtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.2.21.1.2 |
.1.3.6.1.4.1.20044.87.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlcaisDwInsTable'
List of pm200fr20CtrlcaisDwIns Article
Row definition for the pm200fr20CtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.2.22.1.2 |
.1.3.6.1.4.1.20044.87.6.2.262
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlclientResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlclientResetAllCountTable'
List of pm200fr20CtrlclientResetAllCount Article
Row definition for the pm200fr20CtrlclientResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlclientResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.2.262.1.1 |
||||
|
Client Counters Reset :This OID
resets every counter on the client port <Help> This control operates a reset on the statistics current ,previous and history client port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.2.262.1.2 |
.1.3.6.1.4.1.20044.87.6.3.64
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlcommAccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlcommAccessLoopTable'
List of pm200fr20CtrlcommAccessLoop Article
Row definition for the pm200fr20CtrlcommAccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlcommAccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.64.1.1 |
||||
|
Line Terminal Loopback :This OID,
when set, puts the module in common access loop back, looping the 200 Gb/s output signal on the 200 Gb/s input.<Help> This control enables the In Loopback on the line port, loopin… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.64.1.2 |
.1.3.6.1.4.1.20044.87.6.3.66
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrllineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrllineLoopTable'
List of pm200fr20CtrllineLoop Article
Row definition for the pm200fr20CtrllineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrllineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.66.1.1 |
||||
|
Line Facility Loopback :This OID,
when set at '1' puts the module in line loopback mode, looping the received 200 Gb/s signal on the transmit 200 Gb/s output. The Upstream part of the module is timed on the 200 Gb… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.66.1.2 |
.1.3.6.1.4.1.20044.87.6.3.69
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlfecDisableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlfecDisableTable'
List of pm200fr20CtrlfecDisable Article
Row definition for the pm200fr20CtrlfecDisable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlfecDisable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.69.1.1 |
||||
|
Forward Error Correction Inhibition
:This OID, when set, inhibits the Forward Error Correction feature on the line input <Help> This control enables/disables the Forward Error Correction on the line interface |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.69.1.2 |
.1.3.6.1.4.1.20044.87.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlmsaLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlmsaLineLoopTable'
List of pm200fr20CtrlmsaLineLoop Article
Row definition for the pm200fr20CtrlmsaLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlmsaLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.209.1.1 |
||||
|
MSA Line Loop :This OID operates
a line loopback on the MSA Line <Help> This control defines the line loop back of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.209.1.2 |
.1.3.6.1.4.1.20044.87.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlmsaTxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlmsaTxResetTable'
List of pm200fr20CtrlmsaTxReset Article
Row definition for the pm200fr20CtrlmsaTxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlmsaTxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.210.1.1 |
||||
|
Line MSA TX Reset :This OID resets
the TX portion of the MSA line module <Help > This control initiates a reset of the transmitting side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.210.1.2 |
.1.3.6.1.4.1.20044.87.6.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlmsaRxResetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlmsaRxResetTable'
List of pm200fr20CtrlmsaRxReset Article
Row definition for the pm200fr20CtrlmsaRxReset
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlmsaRxReset
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.211.1.1 |
||||
|
Line MSA RX Reset :This OID resets
the RX portion of the MSA line module <Help > This control initiates a reset of the receiving side |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.211.1.2 |
.1.3.6.1.4.1.20044.87.6.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrlmsaShutdownTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrlmsaShutdownTable'
List of pm200fr20CtrlmsaShutdown Article
Row definition for the pm200fr20CtrlmsaShutdown
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrlmsaShutdown
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.212.1.1 |
||||
|
Line MSA Shutdown :This OID enters
a process to shutdown the MSA line module <Help > This control initiates a shutdown of the module |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.212.1.2 |
.1.3.6.1.4.1.20044.87.6.3.263
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CtrllineResetAllCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CtrllineResetAllCountTable'
List of pm200fr20CtrllineResetAllCount Article
Row definition for the pm200fr20CtrllineResetAllCount
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20CtrllineResetAllCount
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.6.3.263.1.1 |
||||
|
Line Counters Reset :This OID
resets every counter on the line port <Help> This control operates a reset on the statistics current ,previous and history line port counters |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.87.6.3.263.1.2 |
pm200fr20RinvSfpTable
table.1.3.6.1.4.1.20044.87.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20RinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20RinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.87.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.87.7.1.1.1.2 |
pm200fr20RinvLineTable
table.1.3.6.1.4.1.20044.87.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20RinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20RinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.87.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.87.7.1.2.1.2 |
.1.3.6.1.4.1.20044.87.9.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.1.1.1.3 |
.1.3.6.1.4.1.20044.87.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.2.1.1.3 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.2.1.1.4 |
|
Default Options on Client Port
:This register configures the default options on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.2.1.1.14 |
.1.3.6.1.4.1.20044.87.9.2.2
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgLineStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgLineStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.2.2.1.1 |
|
Default Settings on Line :This
register configures the default initialisation settings on Line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.2.2.1.3 |
|
Default Options on Line :This
register configures the default options on the line |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.2.2.1.14 |
pm200fr20CfgXfpTable
table.1.3.6.1.4.1.20044.87.9.2.3
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.2.3.1.1 |
|
Default settings on MSA :This
register configures the default initialisation settings on MSA |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.2.3.1.3 |
.1.3.6.1.4.1.20044.87.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
OctetStringr/w Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.87.9.3.1.1.3 |
.1.3.6.1.4.1.20044.87.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
OctetStringr/w Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.87.9.3.2.1.3 |
pm200fr20CfgOtxtlhTable
table.1.3.6.1.4.1.20044.87.9.4.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.4.1.1.1 |
|
Defaut Line output Power :This
register configures the start-up output power of the Line tranceiver (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.4.1.1.6 |
|
Default Line transceiver Tx Channel
:This register configures the start-up laser channel of the Line Tx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.4.1.1.7 |
|
Default Line transceiver Grid
:This register configures the start-up laser grid of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.4.1.1.8 |
|
Default Line TRX lowest Freq :This
register configures the start-up lowest frequency of the Line transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.4.1.1.9 |
|
Default Line transceiver Rx Channel
:This register configures the start-up laser channel of the Line Rx transceiver |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.4.1.1.10 |
.1.3.6.1.4.1.20044.87.9.6.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20CfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20CfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.9.6.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.6.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.6.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.6.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.6.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.87.9.6.1.1.7 |
.1.3.6.1.4.1.20044.87.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonBytesCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonBytesCounterClientInputTable'
List of pm200fr20MonupRmonBytesCounterClientInput Article
Row definition for the pm200fr20MonupRmonBytesCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonBytesCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.16.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.16.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonCrcErrorsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonCrcErrorsCounterClientInputTable'
List of pm200fr20MonupRmonCrcErrorsCounterClientInput Article
Row definition for the pm200fr20MonupRmonCrcErrorsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonCrcErrorsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.48.1.1 |
||||
|
Client Input CRC Errors :This
counter is increased each time a CRC error is detected on the client port<Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.48.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.48.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.80
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonPacketsCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonPacketsCounterClientInputTable'
List of pm200fr20MonupRmonPacketsCounterClientInput Article
Row definition for the pm200fr20MonupRmonPacketsCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonPacketsCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.80.1.1 |
||||
|
Client Input Packets :This counter
is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.80.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.80.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.80.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.112
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonBroadcastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonBroadcastCounterClientInputTable'
List of pm200fr20MonupRmonBroadcastCounterClientInput Article
Row definition for the pm200fr20MonupRmonBroadcastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonBroadcastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.112.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.112.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.112.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.112.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.144
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonMulticastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonMulticastCounterClientInputTable'
List of pm200fr20MonupRmonMulticastCounterClientInput Article
Row definition for the pm200fr20MonupRmonMulticastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonMulticastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.144.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.144.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.144.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.144.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.176
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonPauseFrameCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonPauseFrameCounterClientInputTable'
List of pm200fr20MonupRmonPauseFrameCounterClientInput Article
Row definition for the pm200fr20MonupRmonPauseFrameCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonPauseFrameCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.176.1.1 |
||||
|
Client Input Pause Frames :This
counter is increased each time a Pause frame is received on the client port <Help> This counter gives the number of Pause frames received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.176.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.176.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.176.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.304
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonUnicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonUnicastCounterClientInputTable'
List of pm200fr20MonupRmonUnicastCounterClientInput Article
Row definition for the pm200fr20MonupRmonUnicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonUnicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.304.1.1 |
||||
|
Client Input Unicast Packets :This
counter is increased each time a Unicast packet is received on the client port <Help> This counter gives the number of Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.304.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.304.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.304.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.336
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MonupRmonNonunicastCounterClientInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MonupRmonNonunicastCounterClientInputTable'
List of pm200fr20MonupRmonNonunicastCounterClientInput Article
Row definition for the pm200fr20MonupRmonNonunicastCounterClientInput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MonupRmonNonunicastCounterClientInput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.336.1.1 |
||||
|
Client Input Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is received on the client port <Help> This counter gives the number of Non-Unicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.336.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.336.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.336.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.400
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonBytesCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonBytesCounterClientOutputTable'
List of pm200fr20MondownRmonBytesCounterClientOutput Article
Row definition for the pm200fr20MondownRmonBytesCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonBytesCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.400.1.1 |
||||
|
Client Output Bytes :This counter
is increased each time a data byte is transmitted on the client port <Help> This counter gives the number of bytes transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.400.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.400.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.400.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.432
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonCrcErrorsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonCrcErrorsCounterClientOutputTable'
List of pm200fr20MondownRmonCrcErrorsCounterClientOutput Article
Row definition for the pm200fr20MondownRmonCrcErrorsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonCrcErrorsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.432.1.1 |
||||
|
Client Output CRC Errors :This
counter is increased each time a CRC error is detected on the transmit client port <Help> This counter gives the number of CRC Errors transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.432.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.432.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.432.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.464
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonPacketsCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonPacketsCounterClientOutputTable'
List of pm200fr20MondownRmonPacketsCounterClientOutput Article
Row definition for the pm200fr20MondownRmonPacketsCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonPacketsCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.464.1.1 |
||||
|
Client Output Packets :This counter
is increased each time a packet is transmitted on the client port <Help> This counter gives the number of packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.464.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.464.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.464.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.496
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonBroadcastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonBroadcastCounterClientOutputTable'
List of pm200fr20MondownRmonBroadcastCounterClientOutput Article
Row definition for the pm200fr20MondownRmonBroadcastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonBroadcastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.496.1.1 |
||||
|
Client Output Broadcast Packets
:This counter is increased each time a broadcast packet is transmitted on the client port <Help> This counter gives the number of Broadcast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.496.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.496.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.496.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.528
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonMulticastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonMulticastCounterClientOutputTable'
List of pm200fr20MondownRmonMulticastCounterClientOutput Article
Row definition for the pm200fr20MondownRmonMulticastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonMulticastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.528.1.1 |
||||
|
Client Output Multicast Packets
:This counter is increased each time a Multicast packet is transmitted on the client port <Help> This counter gives the number of Multicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.528.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.528.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.528.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.560
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonPauseFrameCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonPauseFrameCounterClientOutputTable'
List of pm200fr20MondownRmonPauseFrameCounterClientOutput Article
Row definition for the pm200fr20MondownRmonPauseFrameCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonPauseFrameCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.560.1.1 |
||||
|
Client Output Pause Frames :This
counter is increased each time a Pause frame is transmitted on the client port <Help> This counter gives the number of Pause frames transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.560.1.2 |
||||
|
Pause Counter Error :This OID
when set indicates the Pause counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.560.1.3 |
||||
|
Pause Counter Overload :This OID
when set indicates a Pause counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.560.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.688
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonUnicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonUnicastCounterClientOutputTable'
List of pm200fr20MondownRmonUnicastCounterClientOutput Article
Row definition for the pm200fr20MondownRmonUnicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonUnicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.688.1.1 |
||||
|
Client Output Unicast Packets
:This counter is increased each time a Unicast packet is transmitted on the client port <Help> This counter gives the number of Unicast packets transmitted on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.688.1.2 |
||||
|
Unicast Counter Error :This OID
when set indicates the Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.688.1.3 |
||||
|
Unicast Counter Overload :This
OID when set indicates a Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.688.1.4 |
.1.3.6.1.4.1.20044.87.11.2.4.720
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20MondownRmonNonunicastCounterClientOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20MondownRmonNonunicastCounterClientOutputTable'
List of pm200fr20MondownRmonNonunicastCounterClientOutput Article
Row definition for the pm200fr20MondownRmonNonunicastCounterClientOutput
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20MondownRmonNonunicastCounterClientOutput
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.2.4.720.1.1 |
||||
|
Client Output Non Unicast Packets
:This counter is increased each time a Non-Unicast packet is transmitted on the client port <Help> This counter gives the number of Non-Unicast packets transmitted on the client … |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.2.4.720.1.2 |
||||
|
Non Unicast Counter Error :This
OID when set indicates the Non-Unicast counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.720.1.3 |
||||
|
Non Unicast Counter Overload :This
OID when set indicates a Non-Unicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.2.4.720.1.4 |
.1.3.6.1.4.1.20044.87.11.6.16
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomInputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomInputClientCurrent15StatTable'
List of pm200fr20PerfTelecomInputClientCurrent15Stat Article
Row definition for the pm200fr20PerfTelecomInputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomInputClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.16.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.16.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.16.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.16.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.16.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.16.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.16.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.16.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.16.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.16.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.16.1.11 |
.1.3.6.1.4.1.20044.87.11.6.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomInputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomInputClientPast15StatHistoryPort1Table'
List of pm200fr20PerfTelecomInputClientPast15StatHistory Article
Row definition for the pm200fr20PerfTelecomInputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomInputClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.48.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.48.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.48.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.48.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.48.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.48.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.48.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.48.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.48.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.48.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.48.1.11 |
.1.3.6.1.4.1.20044.87.11.6.80
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomInputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomInputClientCurrent24StatTable'
List of pm200fr20PerfTelecomInputClientCurrent24Stat Article
Row definition for the pm200fr20PerfTelecomInputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomInputClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.80.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.80.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.80.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.80.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.80.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.80.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.80.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.80.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.80.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.80.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.80.1.11 |
.1.3.6.1.4.1.20044.87.11.6.112
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomInputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomInputClientPast24StatHistoryPort1Table'
List of pm200fr20PerfTelecomInputClientPast24StatHistory Article
Row definition for the pm200fr20PerfTelecomInputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomInputClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.112.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.112.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.112.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.112.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.112.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.112.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.112.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.112.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.112.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.112.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.112.1.11 |
.1.3.6.1.4.1.20044.87.11.6.144
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomOutputClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomOutputClientCurrent15StatTable'
List of pm200fr20PerfTelecomOutputClientCurrent15Stat Article
Row definition for the pm200fr20PerfTelecomOutputClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomOutputClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.144.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.144.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.144.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.144.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.144.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.144.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.144.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.144.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.144.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.144.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.144.1.11 |
.1.3.6.1.4.1.20044.87.11.6.176
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomOutputClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomOutputClientPast15StatHistoryPort1Table'
List of pm200fr20PerfTelecomOutputClientPast15StatHistory Article
Row definition for the pm200fr20PerfTelecomOutputClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomOutputClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.176.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.176.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.176.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.176.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.176.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.176.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.176.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.176.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.176.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.176.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.176.1.11 |
.1.3.6.1.4.1.20044.87.11.6.208
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomOutputClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomOutputClientCurrent24StatTable'
List of pm200fr20PerfTelecomOutputClientCurrent24Stat Article
Row definition for the pm200fr20PerfTelecomOutputClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomOutputClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.208.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.208.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.208.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.208.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.208.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.208.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.208.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.208.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.208.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.208.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.208.1.11 |
.1.3.6.1.4.1.20044.87.11.6.240
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomOutputClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomOutputClientPast24StatHistoryPort1Table'
List of pm200fr20PerfTelecomOutputClientPast24StatHistory Article
Row definition for the pm200fr20PerfTelecomOutputClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomOutputClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.240.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.240.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.240.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.240.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.240.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.240.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.240.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.240.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.240.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.240.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.6.240.1.11 |
.1.3.6.1.4.1.20044.87.11.6.848
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfDatacomClientCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfDatacomClientCurrent15StatTable'
List of pm200fr20PerfDatacomClientCurrent15Stat Article
Row definition for the pm200fr20PerfDatacomClientCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfDatacomClientCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.848.1.1 |
||||
|
Client Current 15-min Input CRC
counter inv. :This OID indicates that the current 15-min Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.848.1.4 |
||||
|
Client Current 15-min Input CRC
counter :This OID gives the current 15-min Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.848.1.5 |
||||
|
Client Current 15-min Input Packet
counter inv. :This OID indicates that the current 15-min Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.848.1.6 |
||||
|
Client Current 15-min Input Packet
counter :This OID gives the current 15-min Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.848.1.7 |
||||
|
Client Current 15-min Output CRC
counter inv. :This OID indicates that the current 15-min Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.848.1.28 |
||||
|
Client Current 15-min Output CRC
counter :This OID gives the current 15-min Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.848.1.29 |
||||
|
Client Current 15-min Output Packet
counter inv. :This OID indicates that the current 15-min Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.848.1.30 |
||||
|
Client Current 15-min Output Packet
counter :This OID gives the current 15-min Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.848.1.31 |
.1.3.6.1.4.1.20044.87.11.6.880
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfDatacomClientPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfDatacomClientPast15StatHistoryPort1Table'
List of pm200fr20PerfDatacomClientPast15StatHistory Article
Row definition for the pm200fr20PerfDatacomClientPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfDatacomClientPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.880.1.1 |
||||
|
Client Past 15-min Input CRC counter
inv. :This OID indicates that the past 15-min Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.880.1.4 |
||||
|
Client Past 15-min Input CRC counter
:This OID gives the past 15-min Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.880.1.5 |
||||
|
Client Past 15-min Input Packet
counter inv. :This OID indicates that the past 15-min Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.880.1.6 |
||||
|
Client Past 15-min Input Packet
counter :This OID gives the past 15-min Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.880.1.7 |
||||
|
Client Past 15-min Output CRC
counter inv. :This OID indicates that the past 15-min Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.880.1.28 |
||||
|
Client Past 15-min Output CRC
counter :This OID gives the past 15-min Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.880.1.29 |
||||
|
Client Past 15-min Output Packet
counter inv. :This OID indicates that the past 15-min Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.880.1.30 |
||||
|
Client Past 15-min Output Packet
counter :This OID gives the past 15-min Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.880.1.31 |
.1.3.6.1.4.1.20044.87.11.6.912
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfDatacomClientCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfDatacomClientCurrent24StatTable'
List of pm200fr20PerfDatacomClientCurrent24Stat Article
Row definition for the pm200fr20PerfDatacomClientCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfDatacomClientCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.912.1.1 |
||||
|
Client Current 24-hours Input
CRC counter inv. :This OID indicates that the current 24-hours Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.912.1.4 |
||||
|
Client Current 24-hours Input
CRC counter :This OID gives the current 24-hours Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.912.1.5 |
||||
|
Client Current 24-hours Input
Packet counter inv. :This OID indicates that the current 24-hours Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.912.1.6 |
||||
|
Client Current 24-hours Input
Packet counter :This OID gives the current 24-hours Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.912.1.7 |
||||
|
Client Current 24-hours Output
CRC counter inv. :This OID indicates that the current 24-hours Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.912.1.28 |
||||
|
Client Current 24-hours Output
CRC counter :This OID gives the current 24-hours Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.912.1.29 |
||||
|
Client Current 24-hours Output
Packet counter inv. :This OID indicates that the current 24-hours Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.912.1.30 |
||||
|
Client Current 24-hours Output
Packet counter :This OID gives the current 24-hours Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.912.1.31 |
.1.3.6.1.4.1.20044.87.11.6.944
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfDatacomClientPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfDatacomClientPast24StatHistoryPort1Table'
List of pm200fr20PerfDatacomClientPast24StatHistory Article
Row definition for the pm200fr20PerfDatacomClientPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfDatacomClientPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.6.944.1.1 |
||||
|
Client Past 24-hours Input CRC
counter inv. :This OID indicates that the past 24-hours Input CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.944.1.4 |
||||
|
Client Past 24-hours Input CRC
counter :This OID gives the past 24-hours Input CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.944.1.5 |
||||
|
Client Past 24-hours Input Packet
counter inv. :This OID indicates that the past 24-hours Input Packet counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.944.1.6 |
||||
|
Client Past 24-hours Input Packet
counter :This OID gives the past 24-hours Input Packet counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.944.1.7 |
||||
|
Client Past 24-hours Output CRC
counter inv. :This OID indicates that the past 24-hours Output CRC counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.944.1.28 |
||||
|
Client Past 24-hours Output CRC
counter :This OID gives the past 24-hours Output CRC counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.944.1.29 |
||||
|
Client Past 24-hours Output Packet
counter inv. :This OID indicates that the past 24-hours Output Packets counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.6.944.1.30 |
||||
|
Client Past 24-hours Output Packet
counter :This OID gives the past 24-hours Output Packets counter value |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.87.11.6.944.1.31 |
.1.3.6.1.4.1.20044.87.11.7.336
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomLinePostFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomLinePostFecCurrent15StatTable'
List of pm200fr20PerfTelecomLinePostFecCurrent15Stat Article
Row definition for the pm200fr20PerfTelecomLinePostFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomLinePostFecCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.336.1.1 |
||||
|
Current 15-min EBC counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.336.1.2 |
||||
|
Current 15-min EBC counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.336.1.3 |
||||
|
Current 15-min ES counter inv.
:This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.336.1.4 |
||||
|
Current 15-min ES counter :This
OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.336.1.5 |
||||
|
Current 15-min SES counter inv.
:This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.336.1.6 |
||||
|
Current 15-min SES counter :This
OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.336.1.7 |
||||
|
Current 15-min SEFS counter inv.
:This OID indicates that the current 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.336.1.8 |
||||
|
Current 15-min SEFS counter :This
OID gives the current 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.336.1.9 |
||||
|
Current 15-min UAS counter inv.
:This OID indicates that the current 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.336.1.10 |
||||
|
Current 15-min UAS counter :This
OID gives the current 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.336.1.11 |
.1.3.6.1.4.1.20044.87.11.7.337
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomLinePostFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomLinePostFecPast15StatHistoryPort1Table'
List of pm200fr20PerfTelecomLinePostFecPast15StatHistory Article
Row definition for the pm200fr20PerfTelecomLinePostFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomLinePostFecPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.337.1.1 |
||||
|
Previous 15-min EBC counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.337.1.2 |
||||
|
Previous 15-min EBC counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.337.1.3 |
||||
|
Previous 15-min ES counter inv.
:This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.337.1.4 |
||||
|
Previous 15-min ES counter :This
OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.337.1.5 |
||||
|
Previous 15-min SES counter inv.
:This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.337.1.6 |
||||
|
Previous 15-min SES counter :This
OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.337.1.7 |
||||
|
Previous 15-min SEFS counter inv.
:This OID indicates that the previous 15-min severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.337.1.8 |
||||
|
Previous 15-min SEFS counter :This
OID gives the previous 15-min severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.337.1.9 |
||||
|
Previous 15-min UAS counter inv.
:This OID indicates that the previous 15-min UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.337.1.10 |
||||
|
Previous 15-min UAS counter :This
OID gives the previous 15-min UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.337.1.11 |
.1.3.6.1.4.1.20044.87.11.7.338
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomLinePostFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomLinePostFecCurrent24StatTable'
List of pm200fr20PerfTelecomLinePostFecCurrent24Stat Article
Row definition for the pm200fr20PerfTelecomLinePostFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomLinePostFecCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.338.1.1 |
||||
|
Current 24-hours EBC counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.338.1.2 |
||||
|
Current 24-hours EBC counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.338.1.3 |
||||
|
Current 24-hours ES counter inv.
:This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.338.1.4 |
||||
|
Current 24-hours ES counter :This
OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.338.1.5 |
||||
|
Current 24-hours SES counter inv.
:This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.338.1.6 |
||||
|
Current 24-hours SES counter :This
OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.338.1.7 |
||||
|
Current 24-hours SEFS counter
inv. :This OID indicates that the current 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.338.1.8 |
||||
|
Current 24-hours SEFS counter
:This OID gives the current 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.338.1.9 |
||||
|
Current 24-hours UAS counter inv.
:This OID indicates that the current 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.338.1.10 |
||||
|
Current 24-hours UAS counter :This
OID gives the current 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.338.1.11 |
.1.3.6.1.4.1.20044.87.11.7.339
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomLinePostFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomLinePostFecPast24StatHistoryPort1Table'
List of pm200fr20PerfTelecomLinePostFecPast24StatHistory Article
Row definition for the pm200fr20PerfTelecomLinePostFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomLinePostFecPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.339.1.1 |
||||
|
Previous 24-hours EBC counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.339.1.2 |
||||
|
Previous 24-hours EBC counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.339.1.3 |
||||
|
Previous 24-hours ES counter inv.
:This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.339.1.4 |
||||
|
Previous 24-hours ES counter :This
OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.339.1.5 |
||||
|
Previous 24-hours SES counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.339.1.6 |
||||
|
Previous 24-hours SES counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.339.1.7 |
||||
|
Previous 24-hours SEFS counter
inv. :This OID indicates that the previous 24-hours severely Errored Framing Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.339.1.8 |
||||
|
Previous 24-hours SEFS counter
:This OID gives the previous 24-hours severely Errored Framing Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.339.1.9 |
||||
|
Previous 24-hours UAS counter
inv. :This OID indicates that the previous 24-hours UnAvailable Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.339.1.10 |
||||
|
Previous 24-hours UAS counter
:This OID gives the previous 24-hours UnAvailable Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.339.1.11 |
.1.3.6.1.4.1.20044.87.11.7.352
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomBerLinePreFecCurrent15StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomBerLinePreFecCurrent15StatTable'
List of pm200fr20PerfTelecomBerLinePreFecCurrent15Stat Article
Row definition for the pm200fr20PerfTelecomBerLinePreFecCurrent15Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomBerLinePreFecCurrent15Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.352.1.1 |
||||
|
Current 15-min BER counter inv.
:This OID indicates that the current 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.352.1.2 |
||||
|
Current 15-min BER counter :This
OID gives the current 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.352.1.3 |
||||
|
Current 15-min MinBER counter
inv. :This OID indicates that the current 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.352.1.4 |
||||
|
Current 15-min MinBER counter
:This OID gives the current 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.352.1.5 |
||||
|
Current 15-min MaxBER counter
inv. :This OID indicates that the current 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.352.1.6 |
||||
|
Current 15-min MaxBER counter
:This OID gives the current 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.352.1.7 |
.1.3.6.1.4.1.20044.87.11.7.353
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomBerLinePreFecPast15StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomBerLinePreFecPast15StatHistoryPort1Table'
List of pm200fr20PerfTelecomBerLinePreFecPast15StatHistory Article
Row definition for the pm200fr20PerfTelecomBerLinePreFecPast15StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomBerLinePreFecPast15StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.353.1.1 |
||||
|
Previous 15-min BER counter inv.
:This OID indicates that the previous 15-min Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.353.1.2 |
||||
|
Previous 15-min BER counter :This
OID gives the previous 15-min Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.353.1.3 |
||||
|
Previous 15-min MinBER counter
inv. :This OID indicates that the previous 15-min Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.353.1.4 |
||||
|
Previous 15-min MinBER counter
:This OID gives the previous 15-min Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.353.1.5 |
||||
|
Previous 15-min MaxBER counter
inv. :This OID indicates that the previous 15-min severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.353.1.6 |
||||
|
Previous 15-min MaxBER counter
:This OID gives the previous 15-min severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.353.1.7 |
.1.3.6.1.4.1.20044.87.11.7.354
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomBerLinePreFecCurrent24StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomBerLinePreFecCurrent24StatTable'
List of pm200fr20PerfTelecomBerLinePreFecCurrent24Stat Article
Row definition for the pm200fr20PerfTelecomBerLinePreFecCurrent24Stat
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomBerLinePreFecCurrent24Stat
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.354.1.1 |
||||
|
Current 24-hours BER counter inv.
:This OID indicates that the current 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.354.1.2 |
||||
|
Current 24-hours BER counter :This
OID gives the current 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.354.1.3 |
||||
|
Current 24-hoursMinBER counter
inv. :This OID indicates that the current 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.354.1.4 |
||||
|
Current 24-hours MinBER counter
:This OID gives the current 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.354.1.5 |
||||
|
Current 24-hours MaxBER counter
inv. :This OID indicates that the current 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.354.1.6 |
||||
|
Current 24-hours MaxBER counter
:This OID gives the current 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.354.1.7 |
.1.3.6.1.4.1.20044.87.11.7.355
·
1 row entry
·
7 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm200fr20PerfTelecomBerLinePreFecPast24StatHistoryPort1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm200fr20-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm200fr20-MIB::pm200fr20PerfTelecomBerLinePreFecPast24StatHistoryPort1Table'
List of pm200fr20PerfTelecomBerLinePreFecPast24StatHistory Article
Row definition for the pm200fr20PerfTelecomBerLinePreFecPast24StatHistory
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm200fr20PerfTelecomBerLinePreFecPast24StatHistory
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.87.11.7.355.1.1 |
||||
|
Previous 24-hours BER counter
inv. :This OID indicates that the previous 24-hours Coding Violation counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.355.1.2 |
||||
|
Previous 24-hours BER counter
:This OID gives the previous 24-hours Coding Violation counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.355.1.3 |
||||
|
Previous 24-hours MinBER counter
inv. :This OID indicates that the previous 24-hours Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.355.1.4 |
||||
|
Previous 24-hours MinBER counter
:This OID gives the previous 24-hours Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.355.1.5 |
||||
|
Previous 24-hours MaxBER counter
inv. :This OID indicates that the previous 24-hours severely Errored Second counter is invalid |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.87.11.7.355.1.6 |
||||
|
Previous 24-hours MaxBER counter
:This OID gives the previous 24-hours severely Errored Second counter value |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.87.11.7.355.1.7 |