EKINOPS-Pm1004VDC-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
74
Rows
74
Columns
313
.1.3.6.1.4.1.20044.38.2.2.1.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmsfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmsfpWarnDdmTable'
List of pm1004vdcAlmsfpWarnDdm Article
Row definition for the pm1004vdcAlmsfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmsfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.2.1.48.1.1 |
||||
|
Client SFP Tx Power Low Warning
:Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PW_LOW_WNG_1 <Probcause> transmitterFailure (56) <Ala… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.2 |
||||
|
Client SFP Tx Power High Warning
:Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.3 |
||||
|
Client SFP Bias Low Warning :Warning
indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.4 |
||||
|
Client SFP Bias High Warning :Warning
indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_WNG_1 <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.5 |
||||
|
Client SFP Power Supply Low Warning
:Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_WNG_1 <Probcause> powerProblem (36) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.6 |
||||
|
Client SFP Power Supply High Warning
:Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_WNG_1 <Probcause> powerProblem (36) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.7 |
||||
|
Client SFP Temp Low Warning :Warning
indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_WNG_1 <Probcause> temperatureUnacceptable (51) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.8 |
||||
|
Client SFP Temp High Warning :Warning
indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_WNG_1 <Probcause> temperatureUnacceptable (51) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.9 |
||||
|
Client SFP Rx Power Low Warning
:Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_WNG_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.16 |
||||
|
Client SFP Rx Power High Warning
:Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_WNG_1 <Probcause> receiveFailure (41) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.48.1.17 |
.1.3.6.1.4.1.20044.38.2.2.1.56
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmsfpCritDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmsfpCritDdmTable'
List of pm1004vdcAlmsfpCritDdm Article
Row definition for the pm1004vdcAlmsfpCritDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmsfpCritDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.2.1.56.1.1 |
||||
|
Client SFP Custom Tx Power Low
:Custom Alarm indicating that the SFP output power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP output power of p… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.56.1.2 |
||||
|
Client SFP Custom Tx Power High
:Custom Alarm indicating that the SFP output power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP output power of… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.56.1.3 |
||||
|
Client SFP Custom Rx Power Low
:Custom Alarm indicating that the SFP input power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP input power of por… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.56.1.16 |
||||
|
Client SFP Custom Rx Power High
:Custom Alarm indicating that the SFP input power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP input power of p… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.1.56.1.17 |
.1.3.6.1.4.1.20044.38.2.2.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmsfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmsfpAlmDdmTable'
List of pm1004vdcAlmsfpAlmDdm Article
Row definition for the pm1004vdcAlmsfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmsfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.2.2.32.1.1 |
||||
|
Client SFP Tx Power Low :Alarm
indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.2 |
||||
|
Client SFP Tx Power High :Alarm
indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.3 |
||||
|
Client SFP Bias Low :Alarm indicating
that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.4 |
||||
|
Client SFP Bias High :Alarm indicating
that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.5 |
||||
|
Client SFP Power Supply Low :Alarm
indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.6 |
||||
|
Client SFP Power Supply High :Alarm
indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.7 |
||||
|
Client SFP Temp Low :Alarm indicating
that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> equi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.8 |
||||
|
Client SFP Temp High :Alarm indicating
that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.9 |
||||
|
Client SFP Rx Power Low :Alarm
indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.16 |
||||
|
Client SFP Rx Power High :Alarm
indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.2.32.1.17 |
.1.3.6.1.4.1.20044.38.2.2.3.8
·
1 row entry
·
14 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmsynthAlmPortTable'
List of pm1004vdcAlmsynthAlmPort Article
Row definition for the pm1004vdcAlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.2.3.8.1.1 |
||||
|
Client Optical Module Absent :This
OID indicates that the SFP module is not present in the client port (only significant on Client6-GbE port). <Help> This alarm indicates if the client transceiver is present (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.2 |
||||
|
DDM Supported On Client SFP :This
OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function (only significant on Client6-GbE port) <Help> This status indicates if the client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.5 |
||||
|
Client Signal Shutdown :This OID
indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver is ON or OFF <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmtype> eq… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.6 |
||||
|
Tx Client Port In Service :This
OID indicates that the local Tx Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local Tx client port is in service <Condtype> CLIENT_LOCAL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.7 |
||||
|
Rx Client Port In Service :This
OID indicates that the local Rx Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local Rx client port is in service <Condtype> CLIENT_LOCAL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indictaes if a Client Alarm Indication Signal is currently inserted on the client interface <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.9 |
||||
|
Warning On Client SFP DDM :This
OID indicates a warning is being received from the Client SFP DDM (only significant on Client6-GbE port) <Help> This alarm indicates if a DDM Warning has been detected on the cl… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.10 |
||||
|
Alarm On Client SFP DDM :This
OID indicates an alarm is being received from the Client SFP DDM (only significant on Client6-GbE port) <Help> This alarm indicates if a DDM Alarm has been detected on the client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.11 |
||||
|
Custom Alarm On Client SFP DDM
:This OID indicates a Custom alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Custom Alarm has been detected on the client transceiver … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.12 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.13 |
||||
|
Client Sink (Line1 Or Line2) :This
bit indicates the Client #n is active on receive side <Help> This status indicates whether the Client is extracted from Line 1 or Line 2. <Condtype> CLIENT_ACTIVE <Probcause> o… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.16 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.38.2.2.3.16
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmaccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmaccessioAlmTable'
List of pm1004vdcAlmaccessioAlm Article
Row definition for the pm1004vdcAlmaccessioAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmaccessioAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.2.3.16.1.1 |
||||
|
Client SFP Tx Failed :This OID
indicates that the transmitter fails for the SFP plugged into the client port. This alarm reports the transmitter failure alarm generated by the SFPs. <Help> This alarm indicates … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.16.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates that no signal is present on the client port <Help> This alarm indicates if a signal is detected on the client input <Condtype> UP_LOS_1 <Probcause> receiveFailur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.16.1.5 |
.1.3.6.1.4.1.20044.38.2.2.3.72
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmmapperDeAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmmapperDeAlmTable'
List of pm1004vdcAlmmapperDeAlm Article
Row definition for the pm1004vdcAlmmapperDeAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmmapperDeAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.2.3.72.1.1 |
||||
|
Client Loss Of Synchro :This OID
indicates the upstream client input port has lost synchronization on its decoder <Help> This alarms indicates if the input client signal is correctly synchronized with the deco… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.72.1.2 |
||||
|
Client Upstream Buffer Overload
:This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a upstream FIFO overload for this client port <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.72.1.11 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.72.1.12 |
||||
|
Client Downstream Buffer Overload
:This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downstream FIFO overload for this client port <Condtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.72.1.15 |
.1.3.6.1.4.1.20044.38.2.2.3.112
·
1 row entry
·
13 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmvideoProtocolStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmvideoProtocolStatusTable'
List of pm1004vdcAlmvideoProtocolStatus Article
Row definition for the pm1004vdcAlmvideoProtocolStatus
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmvideoProtocolStatus
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.2.3.112.1.1 |
||||
|
SDI Detected On Tx :This OID indicates
that the SDI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the SDI protocol … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.2 |
||||
|
HD-SDI-PAL Detected On Tx :This
OID indicates that the HD-SDI-PAL protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.3 |
||||
|
HD-SDI-NTSC Detected On Tx :This
OID indicates that the HD-SDI-NTSC protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.4 |
||||
|
DVB-ASI Detected On Tx :This OID
indicates that the DVB-ASI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the DVB-ASI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.5 |
||||
|
Fast Ethernet Detected On Tx :This
OID indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) <Help> This status indicates that the Fast Ethernet protocol … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.6 |
||||
|
Gigabit Ethernet Detected On Tx
:This OID indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) <Help> This status indicat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.7 |
||||
|
SDI Detected On Rx :This OID indicates
that the SDI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the SDI protocol has… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.10 |
||||
|
HD-SDI-PAL Detected On Rx :This
OID indicates that the HD-SDI-PAL protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the HD… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.11 |
||||
|
HD-SDI-NTSC Detected On Rx :This
OID indicates that the HD-SDI-NTSC protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.12 |
||||
|
DVB-ASI Detected On Rx :This OID
indicates that the DVB-ASI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the DVB-ASI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.13 |
||||
|
Fast Ethernet Detected On Rx :This
OID indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) <Help> This status indicates that the Fast Ethernet protocol … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.14 |
||||
|
Gigabit Ethernet Detected On Rx
:This OID indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) <Help> This status indicat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.2.3.112.1.15 |
.1.3.6.1.4.1.20044.38.2.3.1.209
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineXfp1WarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineXfp1WarningsTable'
List of pm1004vdcAlmlineXfp1Warnings Article
Row definition for the pm1004vdcAlmlineXfp1Warnings
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineXfp1Warnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.1.209.1.1 |
||||
|
Line Optical Tx Power Low Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_WARNING_1 <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.2 |
||||
|
Line Optical Tx Power High Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_WARNING_1 <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.3 |
||||
|
Line Transceiver Bias Low Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_WARNING_1 <Probcause> tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.4 |
||||
|
Line Transceiver Bias High Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_WARNING_1 <Probcause> tra… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.5 |
||||
|
Line Transceiver Temp Low Warning
:Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.8 |
||||
|
Line Transceiver Temp High Warning
:Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.9 |
||||
|
Line Optical Rx Power Low Warning
:Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_WARNING_1 <Probcause> receiveFailure (4… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.16 |
||||
|
Line Optical Rx Power High Warning
:Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_WARNING_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.209.1.17 |
.1.3.6.1.4.1.20044.38.2.3.1.225
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineOtx1TlhWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineOtx1TlhWarningsTable'
List of pm1004vdcAlmlineOtx1TlhWarnings Article
Row definition for the pm1004vdcAlmlineOtx1TlhWarnings
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineOtx1TlhWarnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.1.225.1.1 |
||||
|
Line Modulator Aging High Warning
:Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_WARNING_1 <Probcause> transmitterFailur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.225.1.6 |
||||
|
Line OTX TLH Aging High Warning
:Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNING_1 <Probcause> transmitterFailure (56) <Alarmtype> eq… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.225.1.7 |
||||
|
Line Freq. Deviation High Warning
:Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_WARNING_1 <Probcause> transmitterFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.225.1.13 |
||||
|
Line Laser Temp. High Warning
:Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.1.225.1.15 |
.1.3.6.1.4.1.20044.38.2.3.2.208
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineXfp1AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineXfp1AlarmTable'
List of pm1004vdcAlmlineXfp1Alarm Article
Row definition for the pm1004vdcAlmlineXfp1Alarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineXfp1Alarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.2.208.1.1 |
||||
|
Line Optical Tx Power Low :Alarm
indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_ALARM_1 <Probcause> transmi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.2 |
||||
|
Line Optical Tx Power High :Alarm
indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_ALARM_1 <Probcause> transmitt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.3 |
||||
|
Line Transceiver Bias Low :Alarm
indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_ALARM_1 <Probcause> transmitterFai… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.4 |
||||
|
Line Transceiver Bias High :Alarm
indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_ALARM_1 <Probcause> transmitterFailu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.5 |
||||
|
Line Transceiver Temp Low :Alarm
indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.8 |
||||
|
Line Transceiver Temp High :Alarm
indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.9 |
||||
|
Line Optical Rx Power Low :Alarm
indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_ALARM_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.16 |
||||
|
Line Optical Rx Power High :Alarm
indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_ALARM_1 <Probcause> receiveFailure (41) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.208.1.17 |
.1.3.6.1.4.1.20044.38.2.3.2.210
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineXfp1CritTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineXfp1CritTable'
List of pm1004vdcAlmlineXfp1Crit Article
Row definition for the pm1004vdcAlmlineXfp1Crit
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineXfp1Crit
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.2.210.1.1 |
||||
|
Line Custom Tx Power Low :Custom
Alarm indicating that the XFP/OTX output power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX output power of… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.210.1.2 |
||||
|
Line Custom Tx Power High :Custom
Alarm indicating that the XFP/OTX output power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX output power … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.210.1.3 |
||||
|
Line Custom Rx Power Low :Custom
Alarm indicating that the XFP/OTX input power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX input power of p… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.210.1.16 |
||||
|
Line Custom Rx Power High :Custom
Alarm indicating that the XFP/OTX input power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX input power of… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.210.1.17 |
.1.3.6.1.4.1.20044.38.2.3.2.212
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineXfp1SupplyAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineXfp1SupplyAlarmTable'
List of pm1004vdcAlmlineXfp1SupplyAlarm Article
Row definition for the pm1004vdcAlmlineXfp1SupplyAlarm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineXfp1SupplyAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.2.212.1.1 |
||||
|
VEE5 Power Supply Low :Alarm indicating
the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.2 |
||||
|
VEE5 Power Supply High :Alarm
indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.3 |
||||
|
VCC2 Power Supply Low :Alarm indicating
the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.4 |
||||
|
VCC2 Power Supply High :Alarm
indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.5 |
||||
|
VCC3 Power Supply Low :Alarm indicating
the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.6 |
||||
|
VCC3 Power Supply High :Alarm
indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.7 |
||||
|
VCC5 Power Supply Low :Alarm indicating
the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.8 |
||||
|
VCC5 Power Supply High :Alarm
indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.9 |
||||
|
VEE5 Power Supply Low Warning
:Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.10 |
||||
|
VEE5 Power Supply High Warning
:Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.11 |
||||
|
VCC2 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.12 |
||||
|
VCC2 Power Supply High Warning
:Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.13 |
||||
|
VCC3 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.14 |
||||
|
VCC3 Power Supply High Warning
:Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.15 |
||||
|
VCC5 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.16 |
||||
|
VCC5 Power Supply High Warning
:Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.212.1.17 |
.1.3.6.1.4.1.20044.38.2.3.2.224
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineOtx1TlhAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineOtx1TlhAlarmsTable'
List of pm1004vdcAlmlineOtx1TlhAlarms Article
Row definition for the pm1004vdcAlmlineOtx1TlhAlarms
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineOtx1TlhAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.2.224.1.1 |
||||
|
Line Modulator Aging High Alarm
:Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.224.1.6 |
||||
|
Line OTX TLH Aging High Alarm
:Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> equipmentA… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.224.1.7 |
||||
|
Line Freq. Deviation High Alarm
:Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.224.1.13 |
||||
|
Line Laser Temp. High Alarm :Alarm
indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.2.224.1.15 |
.1.3.6.1.4.1.20044.38.2.3.3.7
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmsynthAlmLineTable'
List of pm1004vdcAlmsynthAlmLine Article
Row definition for the pm1004vdcAlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.3.7.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transceiver is present. <Condtype> XFP_ABSENT <Probcause> in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_N… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.5 |
||||
|
Line Optical Module Laser Shutdown
:This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or OFF <Condtype> XFP_TX_OFF <Probcause> other (1) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informational… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.7 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.11 |
||||
|
Custom Alarm On Line XFP/OTX DDM
:This OID indicates a Custom alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Custom Alarm has been detected on the line transcei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.12 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.13 |
||||
|
Line Active :This bit indicates
the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.7.1.17 |
pm1004vdcAlmdfrmAlmTable
table.1.3.6.1.4.1.20044.38.2.3.3.128
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmdfrmAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmdfrmAlmTable'
List of pm1004vdcAlmdfrmAlm Article
Row definition for the pm1004vdcAlmdfrmAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmdfrmAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.3.128.1.1 |
||||
|
Loss Of Synchronisation :This
OID indicates the upstream line input port is in Loss of Synchronization. <Help> This alarms indicates if the input signal is correctly synchronized <Condtype> DW_LOSSOFSYNC_1 <Prob… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.128.1.5 |
.1.3.6.1.4.1.20044.38.2.3.3.133
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineSyncAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineSyncAlarmsTable'
List of pm1004vdcAlmlineSyncAlarms Article
Row definition for the pm1004vdcAlmlineSyncAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineSyncAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.3.133.1.1 |
||||
|
Downstream Clock Lock Error :This
OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.133.1.13 |
||||
|
Upstream Clock Lock Error :This
OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.133.1.14 |
||||
|
Line Input Loss Of Signal :This
OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line transceiver input <Condtype> DW_LOS <Probcause> recei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.133.1.17 |
.1.3.6.1.4.1.20044.38.2.3.3.211
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcAlmlineXfp1AlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcAlmlineXfp1AlarmsTable'
List of pm1004vdcAlmlineXfp1Alarms Article
Row definition for the pm1004vdcAlmlineXfp1Alarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcAlmlineXfp1Alarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.2.3.3.211.1.1 |
||||
|
Line Optical Module Not Ready
:This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is ready <Condtype> MOD_NR_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.3 |
||||
|
Line Optical Rx CDR Unlocked :This
OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is locked in the line transceiver <Condtype> RX_CDR_NOT_L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.4 |
||||
|
Line Optical Rx Not Ready :This
OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the line transceiver is ready <Condtype> RX_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.6 |
||||
|
Line Optical Tx CDR Unlocked :This
OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is locked in the line transceiver <Condtype> TX_CDR_NOT_LO… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.7 |
||||
|
Line Optical Tx Failure :This
OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line transceiver is in fail condition <Condtype> TX_FAULT_1… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.8 |
||||
|
Line Optical Tx Not Ready :This
OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx part of the line transceiver is ready <Condtype> TX_NR_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.9 |
||||
|
Line Optical Tx Wavelength Unlocked
:This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wavelenght of the line transceiver is locked <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.15 |
||||
|
Line Optical Tx Temp Regul Failed
:This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail condition <Condtype> TEC_FAULT_1 <Probcause> transmitte… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.16 |
||||
|
Line Rx Photodiode Power Failed
:This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition <Condtype> APD_SUPPLY_FAULT_1 <Probcause> receiverFa… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.2.3.3.211.1.17 |
.1.3.6.1.4.1.20044.38.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrtempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrtempMeasTable'
List of pm1004vdcMesrtempMeas Article
Row definition for the pm1004vdcMesrtempMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrtempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.2.16.1.1 |
|
Client SFP Temperature :This OID
gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperat… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.2.16.1.2 |
.1.3.6.1.4.1.20044.38.3.2.24
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrvoltMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrvoltMeasTable'
List of pm1004vdcMesrvoltMeas Article
Row definition for the pm1004vdcMesrvoltMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrvoltMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.2.24.1.1 |
|
Client SFP Power Supply :This
OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 vol… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.2.24.1.2 |
.1.3.6.1.4.1.20044.38.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrbiasMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrbiasMeasTable'
List of pm1004vdcMesrbiasMeas Article
Row definition for the pm1004vdcMesrbiasMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrbiasMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.2.32.1.1 |
|
Client SFP Laser Bias :This OID
gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the client … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.2.32.1.2 |
.1.3.6.1.4.1.20044.38.3.2.40
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrtxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrtxpwrMeasTable'
List of pm1004vdcMesrtxpwrMeas Article
Row definition for the pm1004vdcMesrtxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrtxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.2.40.1.1 |
|
Client SFP Tx Power :This OID
gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.2.40.1.2 |
.1.3.6.1.4.1.20044.38.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrrxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrrxpwrMeasTable'
List of pm1004vdcMesrrxpwrMeas Article
Row definition for the pm1004vdcMesrrxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrrxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.2.48.1.1 |
|
Client SFP Rx Power :This OID
gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx opt… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.2.48.1.2 |
.1.3.6.1.4.1.20044.38.3.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrxfp1LxModTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrxfp1LxModTempMeasTable'
List of pm1004vdcMesrxfp1LxModTempMeas Article
Row definition for the pm1004vdcMesrxfp1LxModTempMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrxfp1LxModTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.208.1.1 |
|
Line Optical Module Temperature
:This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.208.1.2 |
.1.3.6.1.4.1.20044.38.3.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrxfp1ReservedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrxfp1ReservedTable'
List of pm1004vdcMesrxfp1Reserved Article
Row definition for the pm1004vdcMesrxfp1Reserved
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004vdcMesrxfp1ReservedIndexdeprecated
Index definition for the pm1004vdcMesrxfp1Reserved
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.209.1.1 |
|
pm1004vdcMesrxfp1ReservedPortndeprecated
Not Used :Reserved
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.209.1.2 |
.1.3.6.1.4.1.20044.38.3.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrxfp1LoBiasCurrentMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrxfp1LoBiasCurrentMeasTable'
List of pm1004vdcMesrxfp1LoBiasCurrentMeas Article
Row definition for the pm1004vdcMesrxfp1LoBiasCurrentMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrxfp1LoBiasCurrentMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.210.1.1 |
|
Line Optical Module Laser Bias
:This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bia… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.210.1.2 |
.1.3.6.1.4.1.20044.38.3.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrxfp1LoTxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrxfp1LoTxPowerMeasTable'
List of pm1004vdcMesrxfp1LoTxPowerMeas Article
Row definition for the pm1004vdcMesrxfp1LoTxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrxfp1LoTxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.211.1.1 |
|
Line Optical Module Tx Power :This
OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This me… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.211.1.2 |
.1.3.6.1.4.1.20044.38.3.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrxfp1LiRxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrxfp1LiRxPowerMeasTable'
List of pm1004vdcMesrxfp1LiRxPowerMeas Article
Row definition for the pm1004vdcMesrxfp1LiRxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrxfp1LiRxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.212.1.1 |
|
Line Optical Module Rx Power :This
OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This meas… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.212.1.2 |
.1.3.6.1.4.1.20044.38.3.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrxfp1LxAux1MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrxfp1LxAux1MeasTable'
List of pm1004vdcMesrxfp1LxAux1Meas Article
Row definition for the pm1004vdcMesrxfp1LxAux1Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004vdcMesrxfp1LxAux1MeasIndexdeprecated
Index definition for the pm1004vdcMesrxfp1LxAux1Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.213.1.1 |
|
pm1004vdcMesrxfp1LxAux1MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.213.1.2 |
.1.3.6.1.4.1.20044.38.3.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrxfp1LxAux2MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrxfp1LxAux2MeasTable'
List of pm1004vdcMesrxfp1LxAux2Meas Article
Row definition for the pm1004vdcMesrxfp1LxAux2Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004vdcMesrxfp1LxAux2MeasIndexdeprecated
Index definition for the pm1004vdcMesrxfp1LxAux2Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.214.1.1 |
|
pm1004vdcMesrxfp1LxAux2MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.214.1.2 |
.1.3.6.1.4.1.20044.38.3.3.224
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrotx1AgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrotx1AgingTable'
List of pm1004vdcMesrotx1Aging Article
Row definition for the pm1004vdcMesrotx1Aging
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrotx1Aging
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.224.1.1 |
|
Line OTX TLH Aging :This OID gives
the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure gives the aging of the Line OTX TLH |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.224.1.2 |
.1.3.6.1.4.1.20044.38.3.3.225
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrotx1LaserTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrotx1LaserTemperatureTable'
List of pm1004vdcMesrotx1LaserTemperature Article
Row definition for the pm1004vdcMesrotx1LaserTemperature
table
table
| Column | Syntax | OID |
|---|---|---|
|
pm1004vdcMesrotx1LaserTemperatureIndexdeprecated
Index definition for the pm1004vdcMesrotx1LaserTemperature
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.225.1.1 |
|
pm1004vdcMesrotx1LaserTemperaturePortndeprecated
Line OTX TLH Laser Temperature
:This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the laser t… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.225.1.2 |
.1.3.6.1.4.1.20044.38.3.3.226
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrotx1FreqDeviationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrotx1FreqDeviationTable'
List of pm1004vdcMesrotx1FreqDeviation Article
Row definition for the pm1004vdcMesrotx1FreqDeviation
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrotx1FreqDeviation
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.226.1.1 |
|
Line OTX TLH Frequency Deviation
:This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-32768)*100) (Unit = MHz) <Help> This measure gives… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.226.1.2 |
.1.3.6.1.4.1.20044.38.3.3.227
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMesrotx1LaserWvlengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMesrotx1LaserWvlengthTable'
List of pm1004vdcMesrotx1LaserWvlength Article
Row definition for the pm1004vdcMesrotx1LaserWvlength
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vdcMesrotx1LaserWvlength
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.3.3.227.1.1 |
|
Line Optical Module Wavelength
:This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((193,100+(AV-32768 )*12,5)*10 3)) (Unit = nm) <Help… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.38.3.3.227.1.2 |
.1.3.6.1.4.1.20044.38.4.3.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCntdfrmB1ErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCntdfrmB1ErrCntTable'
List of pm1004vdcCntdfrmB1ErrCnt Article
Row definition for the pm1004vdcCntdfrmB1ErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCntdfrmB1ErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.4.3.152.1.1 |
||||
|
Line Input SM-BIP8 Errors :This
counter is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 errors on the line port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.38.4.3.152.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.4.3.152.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.4.3.152.1.4 |
.1.3.6.1.4.1.20044.38.4.3.153
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCntdfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCntdfrmTimCntTable'
List of pm1004vdcCntdfrmTimCnt Article
Row definition for the pm1004vdcCntdfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCntdfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.4.3.153.1.1 |
||||
|
Line Timer Counter :This is the
timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.38.4.3.153.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.4.3.153.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.4.3.153.1.4 |
.1.3.6.1.4.1.20044.38.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlaccessLoopTable'
List of pm1004vdcCtrlaccessLoop Article
Row definition for the pm1004vdcCtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver <Help> This maintenance parameter opera… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.2.16.1.2 |
.1.3.6.1.4.1.20044.38.6.2.18
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlportOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlportOosModeTable'
List of pm1004vdcCtrlportOosMode Article
Row definition for the pm1004vdcCtrlportOosMode
table
table
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlportOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.18.1.1 |
||||||||
|
Client Out Of Service :This OID
sets the Service state of the client port (In Service, Tx Out of Service, Rx Out of Service or Port (Rx and Tx) Out of Service) <Help> This controls defines the service state of t… |
Pm1004vdcClientOosModer/w Type Values:
Description: Mode for OOS on client ports |
.1.3.6.1.4.1.20044.38.6.2.18.1.2 |
.1.3.6.1.4.1.20044.38.6.2.20
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlsfpOffCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlsfpOffCtrlTable'
List of pm1004vdcCtrlsfpOffCtrl Article
Row definition for the pm1004vdcCtrlsfpOffCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlsfpOffCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.20.1.1 |
||||
|
Signal OFF :This OID switches
off the SFP. <Help> This control defines the laser state of the client transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.2.20.1.2 |
.1.3.6.1.4.1.20044.38.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlcsfUpInsTable'
List of pm1004vdcCtrlcsfUpIns Article
Row definition for the pm1004vdcCtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.2.21.1.2 |
.1.3.6.1.4.1.20044.38.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlcaisDwInsTable'
List of pm1004vdcCtrlcaisDwIns Article
Row definition for the pm1004vdcCtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.2.22.1.2 |
.1.3.6.1.4.1.20044.38.6.2.26
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlclientAccessTermLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlclientAccessTermLoopTable'
List of pm1004vdcCtrlclientAccessTermLoop Article
Row definition for the pm1004vdcCtrlclientAccessTermLoop
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlclientAccessTermLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.26.1.1 |
||||
|
Client Terminal Loopback :This
OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver <Help> This maintenance parameter operate… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.2.26.1.2 |
.1.3.6.1.4.1.20044.38.6.2.43
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlrxVideoProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlrxVideoProtocolTable'
List of pm1004vdcCtrlrxVideoProtocol Article
Row definition for the pm1004vdcCtrlrxVideoProtocol
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlrxVideoProtocol
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.43.1.1 |
||||
|
Force DVB ASI On RX Side
:This OID selects the DVB ASI protocol on the client port and disable the auto-sensing feature <Help> This control selects the DVB ASI protocol on the client port and disable the auto-sen… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.2.43.1.2 |
.1.3.6.1.4.1.20044.38.6.2.128
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrladddropClientRxProtectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrladddropClientRxProtectTable'
List of pm1004vdcCtrladddropClientRxProtect Article
Row definition for the pm1004vdcCtrladddropClientRxProtect
table
table
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrladddropClientRxProtect
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.128.1.1 |
||||||
|
Client Switch Mode :This bit selects
the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the client interface |
Pm1004vdcProtectionTimeSlotr/w Type Values:
Description: protection for control |
.1.3.6.1.4.1.20044.38.6.2.128.1.2 |
.1.3.6.1.4.1.20044.38.6.2.136
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrladddropTsClientModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrladddropTsClientModeTable'
List of pm1004vdcCtrladddropTsClientMode Article
Row definition for the pm1004vdcCtrladddropTsClientMode
table
table
| Column | Syntax | OID | ||
|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrladddropTsClientMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.2.136.1.1 |
||
|
Client Mode :This OID selects
the mode on the client <Help> This control defines the mode (Add/Drop or Split&Select) of the Client |
Pm1004vdcModeTimeSlotr/w Type Values:
Description: different mode for time slot |
.1.3.6.1.4.1.20044.38.6.2.136.1.2 |
.1.3.6.1.4.1.20044.38.6.3.74
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrllineOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrllineOosModeTable'
List of pm1004vdcCtrllineOosMode Article
Row definition for the pm1004vdcCtrllineOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrllineOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.3.74.1.1 |
||||
|
Line Out Of Service (!Laser OFF!)
:This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.3.74.1.2 |
.1.3.6.1.4.1.20044.38.6.3.198
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrldccEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrldccEnableTable'
List of pm1004vdcCtrldccEnable Article
Row definition for the pm1004vdcCtrldccEnable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrldccEnable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.3.198.1.1 |
||||
|
DCC Mode : This OID enables the
DCC mode on the PM <Help> This control enables the DCC mode on the PM |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.3.198.1.2 |
.1.3.6.1.4.1.20044.38.6.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlxfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlxfpOnoffTable'
List of pm1004vdcCtrlxfpOnoff Article
Row definition for the pm1004vdcCtrlxfpOnoff
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlxfpOnoff
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.3.208.1.1 |
||||
|
XFP/OTX Optical Laser OFF :This
OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.3.208.1.2 |
.1.3.6.1.4.1.20044.38.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlxfpLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlxfpLineLoopTable'
List of pm1004vdcCtrlxfpLineLoop Article
Row definition for the pm1004vdcCtrlxfpLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlxfpLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.3.209.1.1 |
||||
|
Line Facility Loopback :This OID
operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management ne… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.3.209.1.2 |
.1.3.6.1.4.1.20044.38.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCtrlxfpXfiLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCtrlxfpXfiLoopTable'
List of pm1004vdcCtrlxfpXfiLoop Article
Row definition for the pm1004vdcCtrlxfpXfiLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcCtrlxfpXfiLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.6.3.210.1.1 |
||||
|
Line Terminal Loopback :This OID
operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers <Help> This maintenance parameter operates a L… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.38.6.3.210.1.2 |
pm1004vdcRinvSfpTable
table.1.3.6.1.4.1.20044.38.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcRinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcRinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.38.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.38.7.1.1.1.2 |
pm1004vdcRinvLineTable
table.1.3.6.1.4.1.20044.38.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcRinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcRinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.38.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.38.7.1.2.1.2 |
.1.3.6.1.4.1.20044.38.9.1.1
·
1 row entry
·
8 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.1.1.1.3 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.1.1.1.9 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.1.1.1.10 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.1.1.1.17 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.1.1.1.18 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.1.1.1.19 |
|
pm1004vdcCfgDownLineSyncAlarmsPortndeprecated
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.1.1.1.20 |
.1.3.6.1.4.1.20044.38.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.2.1.1.3 |
|
Default Protocol on Client Port
:This register configures the default initialisation protocol on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.2.1.1.4 |
|
pm1004vdcCfgAdddropConfPortPortndeprecated
Default Add&Drop mode on Client
Port :This register configures the default Add&Drop mode on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.2.1.1.5 |
pm1004vdcCfgXfpTable
table.1.3.6.1.4.1.20044.38.9.2.3
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.2.3.1.1 |
|
Default settings on XFP Port :This
register configures the default initialisation settings on XFP port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.2.3.1.3 |
|
pm1004vdcCfgDataRateConfXfpPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.2.3.1.4 |
.1.3.6.1.4.1.20044.38.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.38.9.3.1.1.3 |
.1.3.6.1.4.1.20044.38.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.38.9.3.2.1.3 |
.1.3.6.1.4.1.20044.38.9.4.1
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgClientStartupThreshTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgClientStartupThreshTable'
List of Article
Row definition for the startupthresholds
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartupThresh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.4.1.1.1 |
|
Default Setting on Tx Power high
threshold :This register configures the default initialisation of the high threshold of the Transmit power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.1.1.15 |
|
Default Setting on Tx Power low
threshold :This register configures the default initialisation of the low threshold of the Transmit power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.1.1.16 |
|
Default Setting on Rx Power high
threshold :This register configures the default initialisation of the high threshold of the received power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.1.1.19 |
|
Default Setting on Rx Power low
threshold :This register configures the default initialisation of the low threshold of the received power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.1.1.20 |
.1.3.6.1.4.1.20044.38.9.4.2
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgLineStartupThreshTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgLineStartupThreshTable'
List of Article
Row definition for the startupthresholds
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineStartupThresh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.4.2.1.1 |
|
Default Setting on Tx Power high
threshold :This register configures the default initialisation of the high threshold of the Transmit power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.2.1.15 |
|
Default Setting on Tx Power low
threshold :This register configures the default initialisation of the low threshold of the Transmit power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.2.1.16 |
|
Default Setting on Rx Power high
threshold :This register configures the default initialisation of the high threshold of the received power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.2.1.19 |
|
Default Setting on Rx Power low
threshold :This register configures the default initialisation of the low threshold of the received power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.4.2.1.20 |
pm1004vdcCfgOtxtlhTable
table.1.3.6.1.4.1.20044.38.9.5.1
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.5.1.1.1 |
|
pm1004vdcCfgNuPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.3 |
|
Default Line OTX TLH FM amplitude
:This register configures the start-up width of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.4 |
|
Default Line OTX TLH FM frequency
:This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.5 |
|
Defaut Line OTX TLH output Power
:This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.6 |
|
Default Line OTX TLH Channel :This
register configures the start-up laser channel of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.7 |
|
Default Line OTX TLH Grid :This
register configures the start-up laser grid of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.8 |
|
Default Line OTX TLH lowest Freq
:This register configures the start-up lowest frequency supported on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.9 |
|
pm1004vdcCfgReservedPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.10 |
|
Default Line OTX TLH APD mode
:This register configures the start-up APD mode of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.11 |
|
Default Line OTX TLH APD atten.
:This register configures the start-up APD attenuation on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.5.1.1.12 |
.1.3.6.1.4.1.20044.38.9.6.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgSlotslineaddtx1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgSlotslineaddtx1Table'
List of Article
Row definition for the startupslotslineaddtx1
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the slotslineaddtx1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.6.1.1.1 |
|
Port Defaut Add Slot allocation
(MSB) on Line1 :This register configures the start-up slots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.6.1.1.3 |
|
Port Defaut Add Slot allocation
(LSB) on Line1 :This register configures the start-up slots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.6.1.1.4 |
|
Port Defaut Protocol on Line1
:This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.6.1.1.5 |
.1.3.6.1.4.1.20044.38.9.7.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgSlotslineaddtx2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgSlotslineaddtx2Table'
List of Article
Row definition for the startupslotslineaddtx2
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the slotslineaddtx2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.7.1.1.1 |
|
Port Defaut Add Slot allocation
(MSB) on Line2 :This register configures the start-up slots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.7.1.1.3 |
|
Port Defaut Add Slot allocation
(LSB) on Line2 :This register configures the start-up slots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.7.1.1.4 |
|
Port Defaut Protocol on Line2
:This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.7.1.1.5 |
.1.3.6.1.4.1.20044.38.9.8.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgSlotslinepassthroughtx1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgSlotslinepassthroughtx1Table'
List of Article
Row definition for the startupslotslinepassthroughtx1
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the slotslinepassthroughtx1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.8.1.1.1 |
|
Port Defaut PassThrough Slot
allocation (MSB) on Line1 :This register configures the start-up slots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.8.1.1.3 |
|
Port Defaut PassThrough Slot allocation
(LSB) on Line1 :This register configures the start-up slots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.8.1.1.4 |
|
Port Defaut PassThrough Protocol
on Line1 :This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.8.1.1.5 |
.1.3.6.1.4.1.20044.38.9.9.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgSlotslinepassthroughtx2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgSlotslinepassthroughtx2Table'
List of Article
Row definition for the startupslotslinepassthroughtx2
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the slotslinepassthroughtx2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.9.1.1.1 |
|
Port Defaut PassThrough Slot
allocation (MSB) on Line2 :This register configures the start-up slots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.9.1.1.3 |
|
Port Defaut PassThrough Slot allocation
(LSB) on Line2 :This register configures the start-up slots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.9.1.1.4 |
|
Port Defaut PassThrough Protocol
on Line2 :This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.9.1.1.5 |
.1.3.6.1.4.1.20044.38.9.10.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgSlotslinedroprx1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgSlotslinedroprx1Table'
List of Article
Row definition for the startupslotslinedroprx1
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the slotslinedroprx1
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.10.1.1.1 |
|
Port Defaut Drop Slot allocation
(MSB) on Line1 :This register configures the start-up slots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.10.1.1.3 |
|
Port Defaut Drop Slot allocation
(LSB) on Line1 :This register configures the start-up slots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.10.1.1.4 |
|
Port Defaut Protocol on Line1
:This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.10.1.1.5 |
.1.3.6.1.4.1.20044.38.9.11.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgSlotslinedroprx2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgSlotslinedroprx2Table'
List of Article
Row definition for the startupslotslineaddrx2
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the slotslinedroprx2
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.11.1.1.1 |
|
Port Defaut Drop Slot allocation
(MSB) on Line2 :This register configures the start-up slots allocation on the port (MSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.11.1.1.3 |
|
Port Defaut Drop Slot allocation
(LSB) on Line2 :This register configures the start-up slots allocation on the port (LSB) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.11.1.1.4 |
|
Port Defaut Protocol on Line2
:This register configures the start-up protocol on the port |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.11.1.1.5 |
.1.3.6.1.4.1.20044.38.9.13.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcCfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcCfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.9.13.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.13.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.13.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.13.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.13.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.38.9.13.1.1.7 |
.1.3.6.1.4.1.20044.38.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupRmonByteCntTable'
List of pm1004vdcMonupRmonByteCnt Article
Row definition for the pm1004vdcMonupRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.16.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.16.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.38.11.2.4.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupRmonCrcErrorCntTable'
List of pm1004vdcMonupRmonCrcErrorCnt Article
Row definition for the pm1004vdcMonupRmonCrcErrorCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.24.1.1 |
||||
|
Client Input CRC Errors :This
counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.24.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.24.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.24.1.4 |
.1.3.6.1.4.1.20044.38.11.2.4.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupRmonPacketsCntTable'
List of pm1004vdcMonupRmonPacketsCnt Article
Row definition for the pm1004vdcMonupRmonPacketsCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.32.1.1 |
||||
|
Client Input Packets :This counter
is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.32.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.32.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.32.1.4 |
.1.3.6.1.4.1.20044.38.11.2.4.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupRmonBroadcastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupRmonBroadcastCntTable'
List of pm1004vdcMonupRmonBroadcastCnt Article
Row definition for the pm1004vdcMonupRmonBroadcastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupRmonBroadcastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.40.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.40.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.40.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.40.1.4 |
.1.3.6.1.4.1.20044.38.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupRmonMulticastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupRmonMulticastCntTable'
List of pm1004vdcMonupRmonMulticastCnt Article
Row definition for the pm1004vdcMonupRmonMulticastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupRmonMulticastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.48.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.48.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.48.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.38.11.2.4.208
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupLineRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupLineRmonByteCntTable'
List of pm1004vdcMonupLineRmonByteCnt Article
Row definition for the pm1004vdcMonupLineRmonByteCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupLineRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.208.1.1 |
||||
|
Line Input Bytes :This counter
is increased each time a data byte is received on the Line port <Help> This counter gives the number of bytes received on the Line port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.208.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.208.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.208.1.4 |
.1.3.6.1.4.1.20044.38.11.2.4.209
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupLineRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupLineRmonCrcErrorCntTable'
List of pm1004vdcMonupLineRmonCrcErrorCnt Article
Row definition for the pm1004vdcMonupLineRmonCrcErrorCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupLineRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.209.1.1 |
||||
|
Line Input CRC Errors :This counter
is increased each time a CRC error is detected on the Line port <Help> This counter gives the number of CRC Errors received on the Line port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.209.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.209.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.209.1.4 |
.1.3.6.1.4.1.20044.38.11.2.4.210
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vdcMonupLineRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004VDC-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004VDC-MIB::pm1004vdcMonupLineRmonPacketsCntTable'
List of pm1004vdcMonupLineRmonPacketsCnt Article
Row definition for the pm1004vdcMonupLineRmonPacketsCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vdcMonupLineRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.38.11.2.4.210.1.1 |
||||
|
Line Input Packets :This counter
is increased each time a packet is received on the Line port <Help> This counter gives the number of packets received on the Line port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.38.11.2.4.210.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.210.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.38.11.2.4.210.1.4 |