EKINOPS-Pm1004V-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
68
Rows
68
Columns
289
.1.3.6.1.4.1.20044.32.2.2.1.48
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmsfpWarnDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmsfpWarnDdmTable'
List of pm1004vAlmsfpWarnDdm Article
Row definition for the pm1004vAlmsfpWarnDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmsfpWarnDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.2.1.48.1.1 |
||||
|
Client SFP Tx Power Low Warning
:Warning indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PW_LOW_WNG_1 <Probcause> transmitterFailure (56) <Ala… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.2 |
||||
|
Client SFP Tx Power High Warning
:Warning indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.3 |
||||
|
Client SFP Bias Low Warning :Warning
indicating that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_WNG_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.4 |
||||
|
Client SFP Bias High Warning :Warning
indicating that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_WNG_1 <Probcause> transmitterFailure (5… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.5 |
||||
|
Client SFP Power Supply Low Warning
:Warning indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_WNG_1 <Probcause> powerProblem (36) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.6 |
||||
|
Client SFP Power Supply High Warning
:Warning indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_WNG_1 <Probcause> powerProblem (36) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.7 |
||||
|
Client SFP Temp Low Warning :Warning
indicating that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_WNG_1 <Probcause> temperatureUnacceptable (51) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.8 |
||||
|
Client SFP Temp High Warning :Warning
indicating that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_WNG_1 <Probcause> temperatureUnacceptable (51) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.9 |
||||
|
Client SFP Rx Power Low Warning
:Warning indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_WNG_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.16 |
||||
|
Client SFP Rx Power High Warning
:Warning indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_WNG_1 <Probcause> receiveFailure (41) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.48.1.17 |
.1.3.6.1.4.1.20044.32.2.2.1.56
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmsfpCritDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmsfpCritDdmTable'
List of pm1004vAlmsfpCritDdm Article
Row definition for the pm1004vAlmsfpCritDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmsfpCritDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.2.1.56.1.1 |
||||
|
Client SFP Custom Tx Power Low
:Custom Alarm indicating that the SFP output power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP output power of p… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.56.1.2 |
||||
|
Client SFP Custom Tx Power High
:Custom Alarm indicating that the SFP output power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP output power of… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.56.1.3 |
||||
|
Client SFP Custom Rx Power Low
:Custom Alarm indicating that the SFP input power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP input power of por… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.56.1.16 |
||||
|
Client SFP Custom Rx Power High
:Custom Alarm indicating that the SFP input power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the SFP input power of p… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.1.56.1.17 |
pm1004vAlmsfpAlmDdmTable
table.1.3.6.1.4.1.20044.32.2.2.2.32
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmsfpAlmDdmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmsfpAlmDdmTable'
List of pm1004vAlmsfpAlmDdm Article
Row definition for the pm1004vAlmsfpAlmDdm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmsfpAlmDdm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.2.2.32.1.1 |
||||
|
Client SFP Tx Power Low :Alarm
indicating that the SFP output power of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.2 |
||||
|
Client SFP Tx Power High :Alarm
indicating that the SFP output power of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_PWR_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.3 |
||||
|
Client SFP Bias Low :Alarm indicating
that the SFP laser bias current of port is lower than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_LOW_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.4 |
||||
|
Client SFP Bias High :Alarm indicating
that the SFP laser bias current of port is higher than the threshold value written in the SFP EEPROM <Condtype> TX_BIAS_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.5 |
||||
|
Client SFP Power Supply Low :Alarm
indicating that the SFP power supply of port is lower than the threshold value written in the SFP EEPROM <Condtype> VCC_LOW_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.6 |
||||
|
Client SFP Power Supply High :Alarm
indicating that the SFP power supply of port is higher than the threshold value written in the SFP EEPROM <Condtype> VCC_HIGH_ALA_1 <Probcause> powerProblem (36) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.7 |
||||
|
Client SFP Temp Low :Alarm indicating
that the SFP temperature of port is lower than the threshold value written in the SFP EEPROM <Condtype> TEMP_LOW_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> equi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.8 |
||||
|
Client SFP Temp High :Alarm indicating
that the SFP temperature of port is higher than the threshold value written in the SFP EEPROM <Condtype> TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <Alarmtype> e… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.9 |
||||
|
Client SFP Rx Power Low :Alarm
indicating that the SFP input power of port is lower than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_LOW_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equipm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.16 |
||||
|
Client SFP Rx Power High :Alarm
indicating that the SFP input power of port is higher than the threshold value written in the SFP EEPROM <Condtype> RX_PWR_HIGH_ALA_1 <Probcause> receiveFailure (41) <Alarmtype> equ… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.2.32.1.17 |
.1.3.6.1.4.1.20044.32.2.2.3.8
·
1 row entry
·
14 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmsynthAlmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmsynthAlmPortTable'
List of pm1004vAlmsynthAlmPort Article
Row definition for the pm1004vAlmsynthAlmPort
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmsynthAlmPort
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.2.3.8.1.1 |
||||
|
Client SFP Absent :This OID indicates
that the SFP module is not present in the client port (only significant on Client6-GbE port). <Help> This alarm indicates if the client transceiver is present (only signif… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.2 |
||||
|
DDM Supported On Client SFP :This
OID indicates that the Client SFP module supports the Digital Diagnostic Monitoring function (only significant on Client6-GbE port) <Help> This status indicates if the client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.3 |
||||
|
Client HW Fail :This OID indicates
a failure on client port, most probably caused by a HW issue. <Condtype> HW_FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.5 |
||||
|
Client Signal Shutdown :This OID
indicates the Client SFP transmitter output is ON. <Help> This status indicates if the client transceiver is ON or OFF <Condtype> DW_LSD_1 <Probcause> other (1) <Alarmtype> eq… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.6 |
||||
|
Tx Client Port In Service :This
OID indicates that the local Tx Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local Tx client port is in service <Condtype> CLIENT_LOCAL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.7 |
||||
|
Rx Client Port In Service :This
OID indicates that the local Rx Client port is In Service (1) or Out of Service (2) <Help> This status indicates if the local Rx client port is in service <Condtype> CLIENT_LOCAL… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.8 |
||||
|
Client AIS Inserted :This OID
indicates a CAIS has been inserted on the output client port. <Help> This status indictaes if a Client Alarm Indication Signal is currently inserted on the client interface <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.9 |
||||
|
Warning On Client SFP DDM :This
OID indicates a warning is being received from the Client SFP DDM (only significant on Client6-GbE port) <Help> This alarm indicates if a DDM Warning has been detected on the cl… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.10 |
||||
|
Alarm On Client SFP DDM :This
OID indicates an alarm is being received from the Client SFP DDM (only significant on Client6-GbE port) <Help> This alarm indicates if a DDM Alarm has been detected on the client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.11 |
||||
|
Custom Alarm On Client SFP DDM
:This OID indicates a Custom alarm is being received from the Client SFP DDM <Help> This alarm indicates if a DDM Custom Alarm has been detected on the client transceiver … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.12 |
||||
|
Client Access Fail :This OID indicates
a failure on the Client port <Condtype> FAIL_ACC_1 <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.13 |
||||
|
Client Sink (Line1 Or Line2) :This
bit indicates the Client #n is active on receive side <Help> This status indicates whether the Client is extracted from Line 1 or Line 2. <Condtype> CLIENT_ACTIVE <Probcause> o… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.16 |
||||
|
Client Signal Fail Inserted :This
OID indicates a CSF has been inserted in the upstream client port. <Help> This status indicates if a Client Signal Fail is currently inserted on the line signal for this client … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.8.1.17 |
.1.3.6.1.4.1.20044.32.2.2.3.16
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmaccessioAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmaccessioAlmTable'
List of pm1004vAlmaccessioAlm Article
Row definition for the pm1004vAlmaccessioAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmaccessioAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.2.3.16.1.1 |
||||
|
Client SFP Tx Failed :This OID
indicates that the transmitter fails for the SFP plugged into the client port. This alarm reports the transmitter failure alarm generated by the SFPs. <Help> This alarm indicates … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.16.1.2 |
||||
|
Client Input Loss Of Signal :This
OID indicates that no signal is present on the client port <Help> This alarm indicates if a signal is detected on the client input <Condtype> UP_LOS_1 <Probcause> receiveFailur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.16.1.5 |
.1.3.6.1.4.1.20044.32.2.2.3.72
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmmapperDeAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmmapperDeAlmTable'
List of pm1004vAlmmapperDeAlm Article
Row definition for the pm1004vAlmmapperDeAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmmapperDeAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.2.3.72.1.1 |
||||
|
Client Loss Of Synchro :This OID
indicates the upstream client input port has lost synchronization on its decoder <Help> This alarms indicates if the input client signal is correctly synchronized with the deco… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.72.1.2 |
||||
|
Client Upstream Buffer Overload
:This OID indicates that the rate adaptation buffer for client port is in overload. <Help> This alarm indicates if there is a upstream FIFO overload for this client port <Condtype… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.72.1.11 |
||||
|
Client Signal Fail Detected :This
OID indicates that a CSF has been detected on client port in the downstream direction <Help> This alarm indicates if a Client Signal Fail has been detected in the incoming line… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.72.1.12 |
||||
|
Client Downstream Buffer Overload
:This OID indicates that the de-mapper buffer for client port is in overload. <Help> This alarm indicates if there is a downstream FIFO overload for this client port <Condtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.72.1.15 |
.1.3.6.1.4.1.20044.32.2.2.3.112
·
1 row entry
·
13 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmvideoProtocolStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmvideoProtocolStatusTable'
List of pm1004vAlmvideoProtocolStatus Article
Row definition for the pm1004vAlmvideoProtocolStatus
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmvideoProtocolStatus
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.2.3.112.1.1 |
||||
|
SDI Detected On Tx :This OID indicates
that the SDI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the SDI protocol … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.2 |
||||
|
HD-SDI-PAL Detected On Tx :This
OID indicates that the HD-SDI-PAL protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.3 |
||||
|
HD-SDI-NTSC Detected On Tx :This
OID indicates that the HD-SDI-NTSC protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.4 |
||||
|
DVB-ASI Detected On Tx :This OID
indicates that the DVB-ASI protocol has been detected on the transmit side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the DVB-ASI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.5 |
||||
|
Fast Ethernet Detected On Tx :This
OID indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) <Help> This status indicates that the Fast Ethernet protocol … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.6 |
||||
|
Gigabit Ethernet Detected On Tx
:This OID indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) <Help> This status indicat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.7 |
||||
|
SDI Detected On Rx :This OID indicates
that the SDI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the SDI protocol has… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.10 |
||||
|
HD-SDI-PAL Detected On Rx :This
OID indicates that the HD-SDI-PAL protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the HD… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.11 |
||||
|
HD-SDI-NTSC Detected On Rx :This
OID indicates that the HD-SDI-NTSC protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.12 |
||||
|
DVB-ASI Detected On Rx :This OID
indicates that the DVB-ASI protocol has been detected on the receive side of the port (only significant on Video2 to Video 5 ports) <Help> This status indicates that the DVB-ASI… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.13 |
||||
|
Fast Ethernet Detected On Rx :This
OID indicates that the Fast Ethernet protocol has been detected on the port (only significant on Client1-RJ45 port) <Help> This status indicates that the Fast Ethernet protocol … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.14 |
||||
|
Gigabit Ethernet Detected On Rx
:This OID indicates that the Gigabit Ethernet protocol has been detected on the port (only significant on Client6-GbE port) <Help> This status indicat… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.2.3.112.1.15 |
.1.3.6.1.4.1.20044.32.2.3.1.209
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineXfp1WarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineXfp1WarningsTable'
List of pm1004vAlmlineXfp1Warnings Article
Row definition for the pm1004vAlmlineXfp1Warnings
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineXfp1Warnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.1.209.1.1 |
||||
|
Line Optical Tx Power Low Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_WARNING_1 <Probca… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.2 |
||||
|
Line Optical Tx Power High Warning
:Warning indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_WARNING_1 <Probcau… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.3 |
||||
|
Line Transceiver Bias Low Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_WARNING_1 <Probcause> tr… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.4 |
||||
|
Line Transceiver Bias High Warning
:Warning indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_WARNING_1 <Probcause> tra… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.5 |
||||
|
Line Transceiver Temp Low Warning
:Warning indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.8 |
||||
|
Line Transceiver Temp High Warning
:Warning indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable (… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.9 |
||||
|
Line Optical Rx Power Low Warning
:Warning indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_WARNING_1 <Probcause> receiveFailure (4… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.16 |
||||
|
Line Optical Rx Power High Warning
:Warning indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_WARNING_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.209.1.17 |
.1.3.6.1.4.1.20044.32.2.3.1.225
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineOtx1TlhWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineOtx1TlhWarningsTable'
List of pm1004vAlmlineOtx1TlhWarnings Article
Row definition for the pm1004vAlmlineOtx1TlhWarnings
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineOtx1TlhWarnings
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.1.225.1.1 |
||||
|
Line Modulator Aging High Warning
:Warning indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_WARNING_1 <Probcause> transmitterFailur… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.225.1.6 |
||||
|
Line OTX TLH Aging High Warning
:Warning indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_WARNING_1 <Probcause> transmitterFailure (56) <Alarmtype> eq… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.225.1.7 |
||||
|
Line Freq. Deviation High Warning
:Warning indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_WARNING_1 <Probcause> transmitterFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.225.1.13 |
||||
|
Line Laser Temp. High Warning
:Warning indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_WARNING_1 <Probcause> temperatureUnacceptable … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.1.225.1.15 |
.1.3.6.1.4.1.20044.32.2.3.2.208
·
1 row entry
·
9 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineXfp1AlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineXfp1AlarmTable'
List of pm1004vAlmlineXfp1Alarm Article
Row definition for the pm1004vAlmlineXfp1Alarm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineXfp1Alarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.2.208.1.1 |
||||
|
Line Optical Tx Power Low :Alarm
indicating that the XFP/OTX transmitter transmitter output power is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_POWER_LOW_ALARM_1 <Probcause> transmi… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.2 |
||||
|
Line Optical Tx Power High :Alarm
indicating that the XFP/OTX transmitter transmitter output power is higher than the threshold value written in the XFP EEPROM <Condtype> TX_POWER_HIGH_ALARM_1 <Probcause> transmitt… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.3 |
||||
|
Line Transceiver Bias Low :Alarm
indicating that the XFP/OTX transmitter laser bias current is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TX_BIAS_LOW_ALARM_1 <Probcause> transmitterFai… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.4 |
||||
|
Line Transceiver Bias High :Alarm
indicating that the XFP/OTX transmitter laser bias current is higher than the threshold value written in the XFP EEPROM <Condtype> TX_BIAS_HIGH_ALARM_1 <Probcause> transmitterFailu… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.5 |
||||
|
Line Transceiver Temp Low :Alarm
indicating that the XFP/OTX temperature is lower than the threshold value written in the XFP/OTX EEPROM <Condtype> TEMP_LOW_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.8 |
||||
|
Line Transceiver Temp High :Alarm
indicating that the XFP/OTX temperature is higher than the threshold value written in the XFP EEPROM <Condtype> TEMP_HIGH_ALARM_1 <Probcause> temperatureUnacceptable (51) <Alarmtyp… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.9 |
||||
|
Line Optical Rx Power Low :Alarm
indicating that the XFP received optical power is lower than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_LOW_ALARM_1 <Probcause> receiveFailure (41) <Alarmty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.16 |
||||
|
Line Optical Rx Power High :Alarm
indicating that the XFP received optical power is higher than the threshold value written in the XFP EEPROM <Condtype> RX_POWER_HIGH_ALARM_1 <Probcause> receiveFailure (41) <Alarm… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.208.1.17 |
.1.3.6.1.4.1.20044.32.2.3.2.210
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineXfp1CritTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineXfp1CritTable'
List of pm1004vAlmlineXfp1Crit Article
Row definition for the pm1004vAlmlineXfp1Crit
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineXfp1Crit
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.2.210.1.1 |
||||
|
Line Custom Tx Power Low :Custom
Alarm indicating that the XFP/OTX output power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX output power of… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.210.1.2 |
||||
|
Line Custom Tx Power High :Custom
Alarm indicating that the XFP/OTX output power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX output power … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.210.1.3 |
||||
|
Line Custom Rx Power Low :Custom
Alarm indicating that the XFP/OTX input power of port is lower than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX input power of p… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.210.1.16 |
||||
|
Line Custom Rx Power High :Custom
Alarm indicating that the XFP/OTX input power of port is higher than the custom threshold defined in configuration <Help> Custom Alarm indicating that the XFP/OTX input power of… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.210.1.17 |
.1.3.6.1.4.1.20044.32.2.3.2.212
·
1 row entry
·
17 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineXfp1SupplyAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineXfp1SupplyAlarmTable'
List of pm1004vAlmlineXfp1SupplyAlarm Article
Row definition for the pm1004vAlmlineXfp1SupplyAlarm
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineXfp1SupplyAlarm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.2.212.1.1 |
||||
|
VEE5 Power Supply Low :Alarm indicating
the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.2 |
||||
|
VEE5 Power Supply High :Alarm
indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.3 |
||||
|
VCC2 Power Supply Low :Alarm indicating
the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.4 |
||||
|
VCC2 Power Supply High :Alarm
indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.5 |
||||
|
VCC3 Power Supply Low :Alarm indicating
the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.6 |
||||
|
VCC3 Power Supply High :Alarm
indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.7 |
||||
|
VCC5 Power Supply Low :Alarm indicating
the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <Pola… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.8 |
||||
|
VCC5 Power Supply High :Alarm
indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_ALARM_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAlarm (5) <… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.9 |
||||
|
VEE5 Power Supply Low Warning
:Warning indicating the XFP/OTX VEE5 power supply is lower than the threshold written in the EEPROM <Condtype> VEE5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.10 |
||||
|
VEE5 Power Supply High Warning
:Warning indicating the XFP/OTX VEE5 power supply is higher than the threshold written in the EEPROM <Condtype> VEE5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.11 |
||||
|
VCC2 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC2 power supply is lower than the threshold written in the EEPROM <Condtype> VCC2_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.12 |
||||
|
VCC2 Power Supply High Warning
:Warning indicating the XFP/OTX VCC2 power supply is higher than the threshold written in the EEPROM <Condtype> VCC2_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.13 |
||||
|
VCC3 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC3 power supply is lower than the threshold written in the EEPROM <Condtype> VCC3_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.14 |
||||
|
VCC3 Power Supply High Warning
:Warning indicating the XFP/OTX VCC3 power supply is higher than the threshold written in the EEPROM <Condtype> VCC3_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.15 |
||||
|
VCC5 Power Supply Low Warning
:Warning indicating the XFP/OTX VCC5 power supply is lower than the threshold written in the EEPROM <Condtype> VCC5_LOW_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmentAla… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.16 |
||||
|
VCC5 Power Supply High Warning
:Warning indicating the XFP/OTX VCC5 power supply is higher than the threshold written in the EEPROM <Condtype> VCC5_HIGH_WARNING_1 <Probcause> powerProblem (36) <Alarmtype> equipmen… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.212.1.17 |
.1.3.6.1.4.1.20044.32.2.3.2.224
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineOtx1TlhAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineOtx1TlhAlarmsTable'
List of pm1004vAlmlineOtx1TlhAlarms Article
Row definition for the pm1004vAlmlineOtx1TlhAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineOtx1TlhAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.2.224.1.1 |
||||
|
Line Modulator Aging High Alarm
:Alarm indicating the Line OTX TLH modulator aging is higher than the threshold written in the EEPROM <Condtype> LINE_MODULATOR_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.224.1.6 |
||||
|
Line OTX TLH Aging High Alarm
:Alarm indicating the Line OTX TLH aging is higher than the threshold written in the EEPROM <Condtype> LINE_AGING_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Alarmtype> equipmentA… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.224.1.7 |
||||
|
Line Freq. Deviation High Alarm
:Alarm indicating the Line OTX TLH frequency deviation is higher than the threshold written in the EEPROM <Condtype> LINE_FREQ_DEV_HIGH_ALA_1 <Probcause> transmitterFailure (56) <Al… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.224.1.13 |
||||
|
Line Laser Temp. High Alarm :Alarm
indicating the Line OTX TLH laser temperature is higher than the threshold written in the EEPROM <Condtype> LINE_LASER_TEMP_HIGH_ALA_1 <Probcause> temperatureUnacceptable (51) <A… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.2.224.1.15 |
.1.3.6.1.4.1.20044.32.2.3.3.7
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmsynthAlmLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmsynthAlmLineTable'
List of pm1004vAlmsynthAlmLine Article
Row definition for the pm1004vAlmsynthAlmLine
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmsynthAlmLine
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.3.7.1.1 |
||||
|
Line Optical Module Absent :This
OID indicates that the line optical interface (XFP or OTX) is not plugged in. <Help> This alarm indicates if the line transceiver is present. <Condtype> XFP_ABSENT <Probcause> in… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.2 |
||||
|
Line Optical Module Ready :This
OID indicates that the optical interface (XFP or OTX) is not operational. <Help> This status indicates if the line transceiver has been correctly initialized <Condtype> XFP_INIT_N… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.3 |
||||
|
Line Port HW Failure :This OID
indicates a failure on line port, most probably caused by a HW issue <Condtype> LINE_HW_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.5 |
||||
|
Line Optical Module Laser Shutdown
:This OID indicates the line optical output power is on <Help> This status indicates if the line transceiver laser is ON or OFF <Condtype> XFP_TX_OFF <Probcause> other (1) <Alar… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.6 |
||||
|
Line Port In Service :This OID
indicates that the Line port is In Service (1) of Out or Service (2) <Help> This status indicates if the line port is in service <Condtype> LINE_LOCAL_OOS <Probcause> informational… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.7 |
||||
|
Warning On Line Optical Module
DDM :This OID indicates a warning is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Warning has been detected on the line transceiver <Condty… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.10 |
||||
|
Alarm On Line Optical Module DDM
:This OID indicates an alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Alarm has been detected on the line transceiver <Condtype> L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.11 |
||||
|
Custom Alarm On Line XFP/OTX DDM
:This OID indicates a Custom alarm is present coming out of Line optical interface DDM <Help> This alarm indicates if a DDM Custom Alarm has been detected on the line transcei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.12 |
||||
|
Line Port Failure :This OID indicates
a failure on the line port <Condtype> LINE_FAIL <Probcause> equipmentMalfunction (16) <Alarmtype> synthesisAlarm (12) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.13 |
||||
|
Line Active :This bit indicates
the line #n is active on receive side <Help> This status indicates whether the line is active or standby. <Condtype> LINE_ACTIVE <Probcause> informationalStatus(1000) <Alarmtype> … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.7.1.17 |
pm1004vAlmdfrmAlmTable
table.1.3.6.1.4.1.20044.32.2.3.3.128
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmdfrmAlmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmdfrmAlmTable'
List of pm1004vAlmdfrmAlm Article
Row definition for the pm1004vAlmdfrmAlm
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmdfrmAlm
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.3.128.1.1 |
||||
|
Loss Of Synchronisation :This
OID indicates the upstream line input port is in Loss of Synchronization. <Help> This alarms indicates if the input signal is correctly synchronized <Condtype> DW_LOSSOFSYNC_1 <Prob… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.128.1.5 |
.1.3.6.1.4.1.20044.32.2.3.3.133
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineSyncAlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineSyncAlarmsTable'
List of pm1004vAlmlineSyncAlarms Article
Row definition for the pm1004vAlmlineSyncAlarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineSyncAlarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.3.133.1.1 |
||||
|
Downstream Clock Lock Error :This
OID indicates that the deserializer input 10 Gb/s clock recovery is not locked. <Condtype> DW_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity> (2) |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.133.1.13 |
||||
|
Upstream Clock Lock Error :This
OID indicates that the serializer output 10 Gb/s clock multiplier unit is not locked. <Condtype> UP_LOCKERR <Probcause> receiveFailure (41) <Alarmtype> equipmentAlarm (5) <Polarity>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.133.1.14 |
||||
|
Line Input Loss Of Signal :This
OID indicates a loss of signal on the 10 Gb/s input. <Help> This alarm indicates if an optical signal is detected on the line transceiver input <Condtype> DW_LOS <Probcause> recei… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.133.1.17 |
.1.3.6.1.4.1.20044.32.2.3.3.211
·
1 row entry
·
10 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vAlmlineXfp1AlarmsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vAlmlineXfp1AlarmsTable'
List of pm1004vAlmlineXfp1Alarms Article
Row definition for the pm1004vAlmlineXfp1Alarms
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vAlmlineXfp1Alarms
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.2.3.3.211.1.1 |
||||
|
Line Optical Module Not Ready
:This OID indicates that the module is unable to determine correct data. <Help> This alarm indicates if the line transceiver is ready <Condtype> MOD_NR_1 <Probcause> receiveFailure … |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.3 |
||||
|
Line Optical Rx CDR Unlocked :This
OID indicates that a loss of lock on the receiving side CDR has been detected <Help> This alarm indicates if the Rx CDR is locked in the line transceiver <Condtype> RX_CDR_NOT_L… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.4 |
||||
|
Line Optical Rx Not Ready :This
OID indicates that a condition has arisen leading to invalid data on the receiving side. <Help> This alarm indicates if the Rx part of the line transceiver is ready <Condtype> RX_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.6 |
||||
|
Line Optical Tx CDR Unlocked :This
OID indicates a loss of lock on the transmitting side CDR has been detected. <Help> This alarm indicates if the Tx CDR is locked in the line transceiver <Condtype> TX_CDR_NOT_LO… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.7 |
||||
|
Line Optical Tx Failure :This
OID indicates a fault condition on the laser detected by the safety syste <Help> This alarm indicates if the laser of the line transceiver is in fail condition <Condtype> TX_FAULT_1… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.8 |
||||
|
Line Optical Tx Not Ready :This
OID indicates a condition has arisen leading to invalid data on the transmitting side <Help> This alarm indicates if the Tx part of the line transceiver is ready <Condtype> TX_NR_… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.9 |
||||
|
Line Optical Tx Wavelength Unlocked
:This OID indicates that the wavelength error is exceeding the manufacturer tolerance <Help> This alarm indicates if the wavelenght of the line transceiver is locked <Condtype>… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.15 |
||||
|
Line Optical Tx Temp Regul Failed
:This OID indicates a failure on the TEC module <Help> This alarm indicates if the TEC of the line transceiver is in fail condition <Condtype> TEC_FAULT_1 <Probcause> transmitte… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.16 |
||||
|
Line Rx Photodiode Power Failed
:This OID indicates a failure on the APD power supply <Help> This alarm indicates if the APD power supply is in fail condition <Condtype> APD_SUPPLY_FAULT_1 <Probcause> receiverFa… |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.2.3.3.211.1.17 |
pm1004vMesrtempMeasTable
table.1.3.6.1.4.1.20044.32.3.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrtempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrtempMeasTable'
List of pm1004vMesrtempMeas Article
Row definition for the pm1004vMesrtempMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrtempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.2.16.1.1 |
|
Client SFP Temperature :This OID
gives the temperature value of the SFP plugged in port, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the temperat… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.2.16.1.2 |
pm1004vMesrvoltMeasTable
table.1.3.6.1.4.1.20044.32.3.2.24
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrvoltMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrvoltMeasTable'
List of pm1004vMesrvoltMeas Article
Row definition for the pm1004vMesrvoltMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrvoltMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.2.24.1.1 |
|
Client SFP Power Supply :This
OID gives the 3V3 voltage value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Voltage = AV/10000) (Unit = V) <Help> This measure gives the 3V3 vol… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.2.24.1.2 |
pm1004vMesrbiasMeasTable
table.1.3.6.1.4.1.20044.32.3.2.32
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrbiasMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrbiasMeasTable'
List of pm1004vMesrbiasMeas Article
Row definition for the pm1004vMesrbiasMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrbiasMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.2.32.1.1 |
|
Client SFP Laser Bias :This OID
gives the bias value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bias of the client … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.2.32.1.2 |
.1.3.6.1.4.1.20044.32.3.2.40
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrtxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrtxpwrMeasTable'
List of pm1004vMesrtxpwrMeas Article
Row definition for the pm1004vMesrtxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrtxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.2.40.1.1 |
|
Client SFP Tx Power :This OID
gives the transmit power value of the SFP plugged into port, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Tx … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.2.40.1.2 |
.1.3.6.1.4.1.20044.32.3.2.48
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrrxpwrMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrrxpwrMeasTable'
List of pm1004vMesrrxpwrMeas Article
Row definition for the pm1004vMesrrxpwrMeas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrrxpwrMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.2.48.1.1 |
|
Client SFP Rx Power :This OID
gives the receive power value of the SFP plugged into port, read in the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This measure gives the Rx opt… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.2.48.1.2 |
.1.3.6.1.4.1.20044.32.3.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrxfp1LxModTempMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrxfp1LxModTempMeasTable'
List of pm1004vMesrxfp1LxModTempMeas Article
Row definition for the pm1004vMesrxfp1LxModTempMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrxfp1LxModTempMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.208.1.1 |
|
Line Optical Module Temperature
:This OID gives the temperature of the XFP or OTX plugged in line#n, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives … |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.208.1.2 |
.1.3.6.1.4.1.20044.32.3.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrxfp1ReservedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrxfp1ReservedTable'
List of pm1004vMesrxfp1Reserved Article
Row definition for the pm1004vMesrxfp1Reserved
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004vMesrxfp1ReservedIndexdeprecated
Index definition for the pm1004vMesrxfp1Reserved
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.209.1.1 |
|
pm1004vMesrxfp1ReservedPortndeprecated
Not Used :Reserved
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.209.1.2 |
.1.3.6.1.4.1.20044.32.3.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrxfp1LoBiasCurrentMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrxfp1LoBiasCurrentMeasTable'
List of pm1004vMesrxfp1LoBiasCurrentMeas Article
Row definition for the pm1004vMesrxfp1LoBiasCurrentMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrxfp1LoBiasCurrentMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.210.1.1 |
|
Line Optical Module Laser Bias
:This OID gives the bias value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Bias = AV/500) (Unit = mA) <Help> This measure gives the bia… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.210.1.2 |
.1.3.6.1.4.1.20044.32.3.3.211
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrxfp1LoTxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrxfp1LoTxPowerMeasTable'
List of pm1004vMesrxfp1LoTxPowerMeas Article
Row definition for the pm1004vMesrxfp1LoTxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrxfp1LoTxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.211.1.1 |
|
Line Optical Module Tx Power :This
OID gives the transmit power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This me… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.211.1.2 |
.1.3.6.1.4.1.20044.32.3.3.212
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrxfp1LiRxPowerMeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrxfp1LiRxPowerMeasTable'
List of pm1004vMesrxfp1LiRxPowerMeas Article
Row definition for the pm1004vMesrxfp1LiRxPowerMeas
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrxfp1LiRxPowerMeas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.212.1.1 |
|
Line Optical Module Rx Power :This
OID gives the receive power value of the XFP or OTX plugged in line #n, read from the DDM (Digital Diagnostic Monitoring) (Power = 10*log(AV)-40) (Unit = dBm) <Help> This meas… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.212.1.2 |
.1.3.6.1.4.1.20044.32.3.3.213
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrxfp1LxAux1MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrxfp1LxAux1MeasTable'
List of pm1004vMesrxfp1LxAux1Meas Article
Row definition for the pm1004vMesrxfp1LxAux1Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004vMesrxfp1LxAux1MeasIndexdeprecated
Index definition for the pm1004vMesrxfp1LxAux1Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.213.1.1 |
|
pm1004vMesrxfp1LxAux1MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.213.1.2 |
.1.3.6.1.4.1.20044.32.3.3.214
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrxfp1LxAux2MeasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrxfp1LxAux2MeasTable'
List of pm1004vMesrxfp1LxAux2Meas Article
Row definition for the pm1004vMesrxfp1LxAux2Meas
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
pm1004vMesrxfp1LxAux2MeasIndexdeprecated
Index definition for the pm1004vMesrxfp1LxAux2Meas
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.214.1.1 |
|
pm1004vMesrxfp1LxAux2MeasPortndeprecated
Not Used :This OID gives the receive
power value read in the DDM (Digital Diagnostic Monitoring) of the XFP or OTX plugged in line #n (Unit = ?) |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.214.1.2 |
.1.3.6.1.4.1.20044.32.3.3.224
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrotx1AgingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrotx1AgingTable'
List of pm1004vMesrotx1Aging Article
Row definition for the pm1004vMesrotx1Aging
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrotx1Aging
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.224.1.1 |
|
Line OTX TLH Aging :This OID gives
the aging of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Aging = AV) (Unit = %) <Help> This measure gives the aging of the Line OTX TLH |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.224.1.2 |
.1.3.6.1.4.1.20044.32.3.3.225
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrotx1LaserTemperatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrotx1LaserTemperatureTable'
List of pm1004vMesrotx1LaserTemperature Article
Row definition for the pm1004vMesrotx1LaserTemperature
table
table
| Column | Syntax | OID |
|---|---|---|
|
pm1004vMesrotx1LaserTemperatureIndexdeprecated
Index definition for the pm1004vMesrotx1LaserTemperature
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.225.1.1 |
|
pm1004vMesrotx1LaserTemperaturePortndeprecated
Line OTX TLH Laser Temperature
:This OID gives the laser temperature of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Temperature = AV/256) (Unit = C) <Help> This measure gives the laser t… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.225.1.2 |
.1.3.6.1.4.1.20044.32.3.3.226
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrotx1FreqDeviationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrotx1FreqDeviationTable'
List of pm1004vMesrotx1FreqDeviation Article
Row definition for the pm1004vMesrotx1FreqDeviation
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrotx1FreqDeviation
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.226.1.1 |
|
Line OTX TLH Frequency Deviation
:This OID gives the frequency deviation of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Deviation = (AV-32768)*100) (Unit = MHz) <Help> This measure gives… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.226.1.2 |
.1.3.6.1.4.1.20044.32.3.3.227
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMesrotx1LaserWvlengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMesrotx1LaserWvlengthTable'
List of pm1004vMesrotx1LaserWvlength Article
Row definition for the pm1004vMesrotx1LaserWvlength
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the pm1004vMesrotx1LaserWvlength
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.3.3.227.1.1 |
|
Line Optical Module Wavelength
:This OID gives the laser wavelength of the Line OTX TLH, read from the DDM (Digital Diagnostic Monitoring) (Wavelength=299792458/((193,100+(AV-32768 )*12,5)*10 3)) (Unit = nm) <Help… |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.20044.32.3.3.227.1.2 |
.1.3.6.1.4.1.20044.32.4.3.152
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCntdfrmB1ErrCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCntdfrmB1ErrCntTable'
List of pm1004vCntdfrmB1ErrCnt Article
Row definition for the pm1004vCntdfrmB1ErrCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCntdfrmB1ErrCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.4.3.152.1.1 |
||||
|
Line Input CRC Errors :This counter
is incremented each time a B1 error is detected on the Deframer input stream. <Help> This counter gives the number of B1 errors on the line port |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.32.4.3.152.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the B1 error counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.4.3.152.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a B1 error counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.4.3.152.1.4 |
.1.3.6.1.4.1.20044.32.4.3.153
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCntdfrmTimCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCntdfrmTimCntTable'
List of pm1004vCntdfrmTimCnt Article
Row definition for the pm1004vCntdfrmTimCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCntdfrmTimCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.4.3.153.1.1 |
||||
|
Line Timer Counter :This is the
timing counter dedicated to the downstream deframer counters. It is incremented every 125 us. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.20044.32.4.3.153.1.2 |
||||
|
Line Counter Error :This OID when
set indicates the deframer timer counter value is invalid on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.4.3.153.1.3 |
||||
|
Line Counter Overload :This OID
when set indicates a deframer timer counter overload on Port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.4.3.153.1.4 |
.1.3.6.1.4.1.20044.32.6.2.16
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlaccessLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlaccessLoopTable'
List of pm1004vCtrlaccessLoop Article
Row definition for the pm1004vCtrlaccessLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlaccessLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.16.1.1 |
||||
|
Client Facility Loopback :This
OID operates a Client Facility Loopback, looping client input signal on the client output port. The loop is located on the client transceiver <Help> This maintenance parameter opera… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.2.16.1.2 |
.1.3.6.1.4.1.20044.32.6.2.18
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlportOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlportOosModeTable'
List of pm1004vCtrlportOosMode Article
Row definition for the pm1004vCtrlportOosMode
table
table
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlportOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.18.1.1 |
||||||||
|
Client Out Of Service :This OID
sets the Service state of the client port (In Service, Tx Out of Service, Rx Out of Service or Port (Rx and Tx) Out of Service) <Help> This controls defines the service state of t… |
Pm1004vClientOosModer/w Type Values:
Description: Mode for OOS on client ports |
.1.3.6.1.4.1.20044.32.6.2.18.1.2 |
.1.3.6.1.4.1.20044.32.6.2.20
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlsfpOffCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlsfpOffCtrlTable'
List of pm1004vCtrlsfpOffCtrl Article
Row definition for the pm1004vCtrlsfpOffCtrl
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlsfpOffCtrl
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.20.1.1 |
||||
|
Client Signal Shutdown :This OID
switches off the SFP. <Help> This control defines the laser state of the client transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.2.20.1.2 |
pm1004vCtrlcsfUpInsTable
table.1.3.6.1.4.1.20044.32.6.2.21
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlcsfUpInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlcsfUpInsTable'
List of pm1004vCtrlcsfUpIns Article
Row definition for the pm1004vCtrlcsfUpIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlcsfUpIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.21.1.1 |
||||
|
Client Signal Fail Insertion :This
OID, when set, inserts a client signal fail in the upstream client Port. <Help> This control inserts a Client Signal Fail for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.2.21.1.2 |
.1.3.6.1.4.1.20044.32.6.2.22
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlcaisDwInsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlcaisDwInsTable'
List of pm1004vCtrlcaisDwIns Article
Row definition for the pm1004vCtrlcaisDwIns
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlcaisDwIns
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.22.1.1 |
||||
|
Client AIS Insertion :This OID,
when set, inserts a client AIS on the downstream client Port. <Help> This control inserts a Client AIS for the client port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.2.22.1.2 |
.1.3.6.1.4.1.20044.32.6.2.26
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlclientAccessTermLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlclientAccessTermLoopTable'
List of pm1004vCtrlclientAccessTermLoop Article
Row definition for the pm1004vCtrlclientAccessTermLoop
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlclientAccessTermLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.26.1.1 |
||||
|
Client Terminal Loopback :This
OID operates a Client Terminal Loopback, looping client input signal on the client output port. The loop is located on the line transceiver <Help> This maintenance parameter operate… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.2.26.1.2 |
.1.3.6.1.4.1.20044.32.6.2.43
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlrxVideoProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlrxVideoProtocolTable'
List of pm1004vCtrlrxVideoProtocol Article
Row definition for the pm1004vCtrlrxVideoProtocol
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlrxVideoProtocol
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.43.1.1 |
||||
|
Force DVB ASI On RX Side
:This OID selects the DVB ASI protocol on the client port and disable the auto-sensing feature <Help> This control selects the DVB ASI protocol on the client port and disable the auto-sen… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.2.43.1.2 |
.1.3.6.1.4.1.20044.32.6.2.128
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrladddropClientRxProtectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrladddropClientRxProtectTable'
List of pm1004vCtrladddropClientRxProtect Article
Row definition for the pm1004vCtrladddropClientRxProtect
table
table
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrladddropClientRxProtect
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.128.1.1 |
||||||
|
Client Switch Mode :This bit selects
the manual (1) or automatic (0) switch method <Help> This control defines the protection switch mode on the client interface |
Pm1004vProtectionTimeSlotr/w Type Values:
Description: protection for control |
.1.3.6.1.4.1.20044.32.6.2.128.1.2 |
.1.3.6.1.4.1.20044.32.6.2.136
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrladddropTsClientModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrladddropTsClientModeTable'
List of pm1004vCtrladddropTsClientMode Article
Row definition for the pm1004vCtrladddropTsClientMode
table
table
| Column | Syntax | OID | ||
|---|---|---|---|---|
|
Index definition for the pm1004vCtrladddropTsClientMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.2.136.1.1 |
||
|
Client Mode :This OID selects
the mode on the client <Help> This control defines the mode (Add/Drop or Split&Select) of the Client |
Pm1004vModeTimeSlotr/w Type Values:
Description: different mode for time slot |
.1.3.6.1.4.1.20044.32.6.2.136.1.2 |
.1.3.6.1.4.1.20044.32.6.3.74
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrllineOosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrllineOosModeTable'
List of pm1004vCtrllineOosMode Article
Row definition for the pm1004vCtrllineOosMode
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrllineOosMode
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.3.74.1.1 |
||||
|
Line Out Of Service (!Laser OFF!)
:This OID sets the line port Out Of Service <Help> This control defines the service state of the line port |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.3.74.1.2 |
.1.3.6.1.4.1.20044.32.6.3.198
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrldccEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrldccEnableTable'
List of pm1004vCtrldccEnable Article
Row definition for the pm1004vCtrldccEnable
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrldccEnable
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.3.198.1.1 |
||||
|
DCC Enable : This OID enables
the DCC mode on the PM <Help> This control enables the DCC mode on the PM |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.3.198.1.2 |
pm1004vCtrlxfpOnoffTable
table.1.3.6.1.4.1.20044.32.6.3.208
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlxfpOnoffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlxfpOnoffTable'
List of pm1004vCtrlxfpOnoff Article
Row definition for the pm1004vCtrlxfpOnoff
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlxfpOnoff
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.3.208.1.1 |
||||
|
Line Optical Module Laser Shutdown
:This OID switches off the XFP or the OTX <Help> This control defines the laser state of the line transceiver |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.3.208.1.2 |
.1.3.6.1.4.1.20044.32.6.3.209
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlxfpLineLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlxfpLineLoopTable'
List of pm1004vCtrlxfpLineLoop Article
Row definition for the pm1004vCtrlxfpLineLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlxfpLineLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.3.209.1.1 |
||||
|
Line Facility Loopback :This OID
operates a Line Facility Loopback, looping line input signal on the line output port. The loop is located on the line transceiver. If the Line signal carries DCC, the management ne… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.3.209.1.2 |
.1.3.6.1.4.1.20044.32.6.3.210
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCtrlxfpXfiLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCtrlxfpXfiLoopTable'
List of pm1004vCtrlxfpXfiLoop Article
Row definition for the pm1004vCtrlxfpXfiLoop
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vCtrlxfpXfiLoop
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.6.3.210.1.1 |
||||
|
Line Terminal Loopback :This OID
operates a Line Terminal Loopback, looping line input signal on the line output port. The loop is located on all client transceivers <Help> This maintenance parameter operates a L… |
EKINOPS-MIBEkiStater/w Type Values:
|
.1.3.6.1.4.1.20044.32.6.3.210.1.2 |
pm1004vRinvSfpTable
table.1.3.6.1.4.1.20044.32.7.1.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vRinvSfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vRinvSfpTable'
List of the SFPs on the selected module
Row definition for the SFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for SFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.32.7.1.1.1.1 |
|
Inventory for the SFP: This OID contains the inventory for the SFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.32.7.1.1.1.2 |
pm1004vRinvLineTable
table.1.3.6.1.4.1.20044.32.7.1.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vRinvLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vRinvLineTable'
List of the XFPs on the selected module
Row definition for the XFP table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index for XFP table
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.20044.32.7.1.2.1.1 |
|
Inventory for the XFP: This OID contains the inventory for the XFP
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.32.7.1.2.1.2 |
.1.3.6.1.4.1.20044.32.9.1.1
·
1 row entry
·
8 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgClientcaiscsfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgClientcaiscsfTable'
List of Article
Row definition for the accessCAisCsf
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientcaiscsf
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.1.1.1.1 |
|
CAIS mode on Client Port :This
register enables/disables port laser shutdown on CAIS insertion condition |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.1.1.1.3 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.1.1.1.9 |
|
CSF contributors on Client Port
:This register configures the contributors to upstream CSF insertion on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.1.1.1.10 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.1.1.1.17 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.1.1.1.18 |
|
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.1.1.1.19 |
|
pm1004vCfgDownLineSyncAlarmsPortndeprecated
CAIS contributors on Client Port
:This register configures the contributors to downstream CAIS insertion on port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.1.1.1.20 |
.1.3.6.1.4.1.20044.32.9.2.1
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgClientStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgClientStartupTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartup
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.2.1.1.1 |
|
Default Settings on Client Port
:This register configures the default initialisation settings on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.2.1.1.3 |
|
Default Protocol on Client Port
:This register configures the default initialisation protocol on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.2.1.1.4 |
|
pm1004vCfgAdddropConfPortPortndeprecated
Default Add&Drop mode on Client
Port :This register configures the default Add&Drop mode on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.2.1.1.5 |
pm1004vCfgXfpTable
table.1.3.6.1.4.1.20044.32.9.2.3
·
1 row entry
·
3 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgXfpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgXfpTable'
List of Article
Row definition for the startup
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the xfp table
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.2.3.1.1 |
|
Default settings on XFP Port :This
register configures the default initialisation settings on XFP port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.2.3.1.3 |
|
pm1004vCfgDataRateConfXfpPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.2.3.1.4 |
.1.3.6.1.4.1.20044.32.9.3.1
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgLabelclientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgLabelclientTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelclient
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.3.1.1.1 |
|
Default settings on the label
of the Ports :These registers configures the default initialisation settings of the labels of the ports. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.32.9.3.1.1.3 |
pm1004vCfgLabellineTable
table.1.3.6.1.4.1.20044.32.9.3.2
·
1 row entry
·
2 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgLabellineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgLabellineTable'
List of Article
Row definition for the labels
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the labelline
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.3.2.1.1 |
|
Default settings on the label
of the lines :These registers configures the default initialisation settings of the labels of the lines. |
SNMPv2-TCDisplayStringr/w Constraints: range: 1-16Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.20044.32.9.3.2.1.3 |
.1.3.6.1.4.1.20044.32.9.4.1
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgClientStartupThreshTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgClientStartupThreshTable'
List of Article
Row definition for the startupthresholds
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the clientStartupThresh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.4.1.1.1 |
|
Default Setting on Tx Power high
threshold :This register configures the default initialisation of the high threshold of the Transmit power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.1.1.15 |
|
Default Setting on Tx Power low
threshold :This register configures the default initialisation of the low threshold of the Transmit power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.1.1.16 |
|
Default Setting on Rx Power high
threshold :This register configures the default initialisation of the high threshold of the received power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.1.1.19 |
|
Default Setting on Rx Power low
threshold :This register configures the default initialisation of the low threshold of the received power on the port. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.1.1.20 |
.1.3.6.1.4.1.20044.32.9.4.2
·
1 row entry
·
5 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgLineStartupThreshTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgLineStartupThreshTable'
List of Article
Row definition for the startupthresholds
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the lineStartupThresh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.4.2.1.1 |
|
Default Setting on Tx Power high
threshold :This register configures the default initialisation of the high threshold of the Transmit power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.2.1.15 |
|
Default Setting on Tx Power low
threshold :This register configures the default initialisation of the low threshold of the Transmit power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.2.1.16 |
|
Default Setting on Rx Power high
threshold :This register configures the default initialisation of the high threshold of the received power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.2.1.19 |
|
Default Setting on Rx Power low
threshold :This register configures the default initialisation of the low threshold of the received power on the line. |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.4.2.1.20 |
pm1004vCfgOtxtlhTable
table.1.3.6.1.4.1.20044.32.9.5.1
·
1 row entry
·
11 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgOtxtlhTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgOtxtlhTable'
List of Article
Row definition for the startuptlh
table
table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlh
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.5.1.1.1 |
|
pm1004vCfgNuPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.3 |
|
Default Line OTX TLH FM amplitude
:This register configures the start-up width of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.4 |
|
Default Line OTX TLH FM frequency
:This register configures the start-up frequency of the frequency modulation of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.5 |
|
Defaut Line OTX TLH output Power
:This register configures the start-up output power of the Line OTX TLH (Unit = dBm) |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.6 |
|
Default Line OTX TLH Channel :This
register configures the start-up laser channel of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.7 |
|
Default Line OTX TLH Grid :This
register configures the start-up laser grid of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.8 |
|
Default Line OTX TLH lowest Freq
:This register configures the start-up lowest frequency supported on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.9 |
|
pm1004vCfgReservedPortndeprecated
:
|
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.10 |
|
Default Line OTX TLH APD mode
:This register configures the start-up APD mode of the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.11 |
|
Default Line OTX TLH APD atten.
:This register configures the start-up APD attenuation on the Line OTX TLH |
Unsigned32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.5.1.1.12 |
.1.3.6.1.4.1.20044.32.9.6.1
·
1 row entry
·
6 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vCfgOtxtlhcapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vCfgOtxtlhcapabilitiesTable'
List of Article
Row definition for the startuptablefive
table
table
| Column | Syntax | OID |
|---|---|---|
|
Index definition for the otxtlhcapabilities
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.9.6.1.1.1 |
|
Component parameters :This OID
defines the component parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.6.1.1.3 |
|
Miscellaneous default settings
:This OID defines the miscellaneous parameters |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.6.1.1.4 |
|
Number of the first channel of
the component :This OID defines the first channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.6.1.1.5 |
|
Number of the last channel of
the component :This OID defines the last channel number of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.6.1.1.6 |
|
Grid value of the component :This
OID defines the grid of the PM |
Unsigned32 Constraints: range: 0-65536 |
.1.3.6.1.4.1.20044.32.9.6.1.1.7 |
.1.3.6.1.4.1.20044.32.11.2.4.16
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupRmonByteCntTable'
List of pm1004vMonupRmonByteCnt Article
Row definition for the pm1004vMonupRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.16.1.1 |
||||
|
Client Input Bytes :This counter
is increased each time a data byte is received on the client port <Help> This counter gives the number of bytes received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.16.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.16.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.16.1.4 |
.1.3.6.1.4.1.20044.32.11.2.4.24
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupRmonCrcErrorCntTable'
List of pm1004vMonupRmonCrcErrorCnt Article
Row definition for the pm1004vMonupRmonCrcErrorCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.24.1.1 |
||||
|
Client Input CRC Errors :This
counter is increased each time a CRC error is detected on the client port <Help> This counter gives the number of CRC Errors received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.24.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.24.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.24.1.4 |
.1.3.6.1.4.1.20044.32.11.2.4.32
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupRmonPacketsCntTable'
List of pm1004vMonupRmonPacketsCnt Article
Row definition for the pm1004vMonupRmonPacketsCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.32.1.1 |
||||
|
Client Input Packets :This counter
is increased each time a packet is received on the client port <Help> This counter gives the number of packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.32.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.32.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.32.1.4 |
.1.3.6.1.4.1.20044.32.11.2.4.40
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupRmonBroadcastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupRmonBroadcastCntTable'
List of pm1004vMonupRmonBroadcastCnt Article
Row definition for the pm1004vMonupRmonBroadcastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupRmonBroadcastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.40.1.1 |
||||
|
Client Input Broadcast Packets
:This counter is increased each time a broadcast packet is received on the client port <Help> This counter gives the number of Broadcast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.40.1.2 |
||||
|
Broadcast Counter Error :This
OID when set indicates the Broadcast counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.40.1.3 |
||||
|
Broadcast Counter Overload :This
OID when set indicates a Broadcast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.40.1.4 |
.1.3.6.1.4.1.20044.32.11.2.4.48
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupRmonMulticastCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupRmonMulticastCntTable'
List of pm1004vMonupRmonMulticastCnt Article
Row definition for the pm1004vMonupRmonMulticastCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupRmonMulticastCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.48.1.1 |
||||
|
Client Input Multicast Packets
:This counter is increased each time a Multicast packet is received on the client port <Help> This counter gives the number of Multicast packets received on the client port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.48.1.2 |
||||
|
Multicast Counter Error :This
OID when set indicates the Multicast counter value is invalid on clinet port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.48.1.3 |
||||
|
Multicast Counter Overload :This
OID when set indicates a Multicast counter overload on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.48.1.4 |
.1.3.6.1.4.1.20044.32.11.2.4.208
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupLineRmonByteCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupLineRmonByteCntTable'
List of pm1004vMonupLineRmonByteCnt Article
Row definition for the pm1004vMonupLineRmonByteCnt
table
table
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupLineRmonByteCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.208.1.1 |
||||
|
Line Input Bytes :This counter
is increased each time a data byte is received on the Line port <Help> This counter gives the number of bytes received on the Line port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.208.1.2 |
||||
|
Bytes Counter Error :This OID
when set indicates the Bytes counter value is invalid on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.208.1.3 |
||||
|
Bytes Counter Overload :This OID
when set indicates a Bytes counter overload on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.208.1.4 |
.1.3.6.1.4.1.20044.32.11.2.4.209
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupLineRmonCrcErrorCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupLineRmonCrcErrorCntTable'
List of pm1004vMonupLineRmonCrcErrorCnt Article
Row definition for the pm1004vMonupLineRmonCrcErrorCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupLineRmonCrcErrorCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.209.1.1 |
||||
|
Line Input CRC Errors :This counter
is increased each time a CRC error is detected on the Line port <Help> This counter gives the number of CRC Errors received on the Line port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.209.1.2 |
||||
|
CRC Errors Counter Error :This
OID when set indicates the CRC Errors counter value is invalid on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.209.1.3 |
||||
|
CRC Errors Counter Overload :This
OID when set indicates a CRC Errors counter overload on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.209.1.4 |
.1.3.6.1.4.1.20044.32.11.2.4.210
·
1 row entry
·
4 columns
Uses the ekinops variant from
Command help
/opt/observium/mibs/ekinops.
Walk pm1004vMonupLineRmonPacketsCntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EKINOPS-Pm1004V-MIB' -M '/opt/observium/mibs/ekinops:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EKINOPS-Pm1004V-MIB::pm1004vMonupLineRmonPacketsCntTable'
List of pm1004vMonupLineRmonPacketsCnt Article
Row definition for the pm1004vMonupLineRmonPacketsCnt
table
table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index definition for the pm1004vMonupLineRmonPacketsCnt
table |
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.20044.32.11.2.4.210.1.1 |
||||
|
Line Input Packets :This counter
is increased each time a packet is received on the Line port <Help> This counter gives the number of packets received on the Line port |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.20044.32.11.2.4.210.1.2 |
||||
|
Packets Counter Error :This OID
when set indicates the Packets counter value is invalid on client port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.210.1.3 |
||||
|
Packets Counter Overload :This
OID when set indicates a Packets counter overload on line port |
EKINOPS-MIBEkiOnOff Type Values:
|
.1.3.6.1.4.1.20044.32.11.2.4.210.1.4 |