ECS5520-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
198
Rows
198
Columns
1,169
switchInfoTable
table.1.3.6.1.4.1.259.10.1.51.1.1.3
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::switchInfoTable'
Table of descriptive and status information about the switch units in this system.
Table providing descriptions and status information for
switch units.
switch units.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swUnitIndexThis object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.1 |
| swHardwareVerHardware version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.2 |
| swMicrocodeVerMicrocode version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.3 |
| swLoaderVerLoader version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.4 |
| swBootRomVerBoot ROM code version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.5 |
| swOpCodeVerOperation code version of the main board. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.6 |
| swPortNumberThe number of ports on this switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.7 |
| swPowerStatusIndicates the switch using internalPower(1), redundantPower(2) or both(3) | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.8 |
| swRoleInSystemIndicates the switch is master(1), backupMaster(2) or slave(3) in this system. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.9 |
| swSerialNumberSerial number of the switch. | OctetString Constraints: range: 0-80 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.10 |
| swServiceTagService tag serial-number of the switch. | OctetString Constraints: range: 0-80 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.13 |
| swModelNumberModel number of the switch. | OctetString Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.14 |
| swEpldVerThe EPLD version of the switch. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.10.1.51.1.1.3.1.15 |
switchIndivPowerTable
table.1.3.6.1.4.1.259.10.1.51.1.1.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchIndivPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::switchIndivPowerTable'
Table about the status of individual powers.
Table about the status of individual power.
| Column | Syntax | OID |
|---|---|---|
| swIndivPowerUnitIndexThis is defined as swUnitIndex. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.6.1.1 |
| swIndivPowerIndex1 means internal power, 2 means external power. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.1.6.1.2 |
| swIndivPowerStatusnotPresent(1) means not present, green(2) means up, red(3) means down. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.1.6.1.3 |
switchFanTable
table.1.3.6.1.4.1.259.10.1.51.1.1.9
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::switchFanTable'
The fan status table.
A conceptual row of the switchFanTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| switchUnitIndexThe unit of the switch for the stackable device. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.9.1.1 |
| switchFanIndexThe unit number of the fan. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.9.1.2 |
| switchFanStatusIndicating the status of the fan, 1:ok; 2:failure. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.1.9.1.3 |
| switchFanOperSpeedThe operational value of the fan speed, measured in rpm (rotations per minute). | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.1.9.1.6 |
switchThermalTempTable
table.1.3.6.1.4.1.259.10.1.51.1.1.11
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchThermalTempTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::switchThermalTempTable'
The table which collects switch temperature information.
A conceptual row of the switchThermalTempTable.
| Column | Syntax | OID |
|---|---|---|
| switchThermalTempUnitIndexThe unit of the switch for stackable device. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.11.1.1 |
| switchThermalTempThermalIndexThe thermal index of the switch. | Integer32 Constraints: range: 1-3 | .1.3.6.1.4.1.259.10.1.51.1.1.11.1.2 |
| switchThermalTempValueThe temperature of the device in degrees Celsius. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.1.11.1.3 |
switchThermalActionTable
table.1.3.6.1.4.1.259.10.1.51.1.1.12
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchThermalActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::switchThermalActionTable'
The table for configuring the thermal action.
A conceptual row of the switchThermalActionTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| switchThermalActionUnitIndexThe unit of the switch for stackable device. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.12.1.1 | ||||
| switchThermalActionThermalIndexThe thermal index of the switch. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.12.1.2 | ||||
| switchThermalActionIndexThe action index of the switchTheramlActionTable. | Integer32 Constraints: range: 1-1 | .1.3.6.1.4.1.259.10.1.51.1.1.12.1.3 | ||||
| switchThermalActionRisingThresholdThe rising threshold of the switch temperature. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.1.12.1.4 | ||||
| switchThermalActionFallingThresholdThe falling threshold of the switch temperature. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.1.12.1.5 | ||||
| switchThermalActionActionThe action that will be taken when the temperature exceeds the rising threshold or falls below the falling threshold. | Bitsr/w | .1.3.6.1.4.1.259.10.1.51.1.1.12.1.6 | ||||
| switchThermalActionStatusSet valid(1) to create an entry, Set Invalid(2) to delete an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.1.12.1.7 |
switchStackingTable
table.1.3.6.1.4.1.259.10.1.51.1.1.23
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk switchStackingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::switchStackingTable'
Table of descriptive and status information describing the configuration of stacking system.
An entry in the table, describing the configuration of
stacking system of one unit.
stacking system of one unit.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swStackingUnitIndexThis object identifies the switch within the system for which this entry contains information. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.1.23.1.1 |
| swActiveStackingButtonThis object identifies the active status of stacking button of the switch. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.1.23.1.2 |
| swConfigStackingButtonThis object identifies the configured status of stacking button of the switch. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.1.23.1.3 |
| swMasterButtonThis object identifies the master button status of the switch. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.1.23.1.4 |
| swActiveStackingPortOptionThis object identifies the active option status of stacking port of the switch. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.1.23.1.5 |
| swConfigStackingPortOptionThis object identifies the configured option status of stacking port of the switch. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.1.23.1.6 |
portTable
table.1.3.6.1.4.1.259.10.1.51.1.2.1
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::portTable'
Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk.
An entry in the table, describing the configuration of
one switch port or trunk.
one switch port or trunk.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| portIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.1 | ||||
| portNameThe name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.2 | ||||
| portTypeIndicates the port type of the configuration of the switch. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.3 | ||||
| portSpeedDpxCfgConfigures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.4 | ||||
| portFlowCtrlCfg(1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.5 | ||||
| portSpeedDpxStatusThe operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case t… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.8 | ||||
| portFlowCtrlStatus(2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently confi… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.9 | ||||
| portTrunkIndexThe trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trunkIndex, defined by the corresponding tru… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.10 | ||||
| portComboForcedModeThis determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port, this has its own valid values not equal… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.12 | ||||
| portMasterSlaveModeCfgConfigures the PHY mode when auto negotiation is disabled and speed-duplex is 1000full for giga copper port. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.15 | ||||
| portMacAddrLearningStatusSet this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.2.1.1.17 | ||||
| portMacAddrLearningCountThe current number of learned MAC addresses. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.2.1.1.18 |
loopInternalResultTable
table.1.3.6.1.4.1.259.10.1.51.1.2.4.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk loopInternalResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::loopInternalResultTable'
Table for internal loopback test result.
Entry for internal loopback test result.
Indexes
| Column | Syntax | OID |
|---|---|---|
| loopInternalResultIfIndexThis is defined as the ifIndex. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.4.2.1.1 |
| loopInternalResultStatusThe result of internal loopback. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.2.4.2.1.2 |
| loopInternalResultTimeDisplays the last time of internal loopback. For example, 'Jan 1 02:03:04 2002'. | OctetString Constraints: range: 0-20 | .1.3.6.1.4.1.259.10.1.51.1.2.4.2.1.3 |
portUtilTable
table.1.3.6.1.4.1.259.10.1.51.1.2.6
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portUtilTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::portUtilTable'
Dispalys port utilization during recent 300 seconds.
Dispalys port utilization during recent 300 seconds.
Indexes
| Column | Syntax | OID |
|---|---|---|
| portUtilIfIndexThe port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.6.1.1 |
| portInOctetRateThe input octet rate (kbits/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.10.1.51.1.2.6.1.2 |
| portInPacketRateThe input packet rate (pkts/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.10.1.51.1.2.6.1.3 |
| portInUtilThe input utilization of the port, in one per hundred. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.6.1.4 |
| portOutOctetRateThe output octet rate (kbits/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.10.1.51.1.2.6.1.5 |
| portOutPacketRateThe output packet rate (pkts/sec) of the port. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.259.10.1.51.1.2.6.1.6 |
| portOutUtilThe output utilization of the port, in one per hundred. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.6.1.7 |
portVlanTrunkingTable
table.1.3.6.1.4.1.259.10.1.51.1.2.7
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portVlanTrunkingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::portVlanTrunkingTable'
Configures vlan trunking feature.
Configures vlan trunking feature.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| portVlanTrunkingIfIndexThe port and trunk interface of the portVlanTrunkingTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.7.1.1 | ||||
| portVlanTrunkingStatusWhether vlan trunking is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.2.7.1.2 |
portMediaInfoTable
table.1.3.6.1.4.1.259.10.1.51.1.2.10
·
1 row entry
·
11 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portMediaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::portMediaInfoTable'
This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated with the operational cards will be included in this table.
An entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table.
The ifIndices of ethernet interfaces will be used
to index this table.
Indexes
| Column | Syntax | OID |
|---|---|---|
| portMediaInfoIfIndexifindex. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.1 |
| portMediaInfoConnectorTypeThe connector type. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.2 |
| portMediaInfoFiberTypeThe fiber type. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.3 |
| portMediaInfoEthComplianceCodesThe ethernet compliance codes. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.4 |
| portMediaInfoBaudRateThe baud rate. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.5 |
| portMediaInfoVendorOUIThe OUI of the vendor. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.6 |
| portMediaInfoVendorNameThe media vendor name, full name of the corporation. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.7 |
| portMediaInfoPartNumberThe media vendor part number. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.8 |
| portMediaInfoRevisionThe media vendor product version number. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.9 |
| portMediaInfoSerialNumberThe vendor serial number of the media device. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.10 |
| portMediaInfoDateCodeThe date code of the media device. | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.2.10.1.11 |
.1.3.6.1.4.1.259.10.1.51.1.2.11
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portOpticalMonitoringInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::portOpticalMonitoringInfoTable'
This table lists the instrumented parameters of all optical interfaces.
Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table.
whose parameters need to be monitored will
be used to index this table.
Indexes
| Column | Syntax | OID |
|---|---|---|
| portOpticalMonitoringInfoIfIndexifindex. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.11.1.1 |
| portOpticalMonitoringInfoTemperatureThis object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius). If the device supports ALARM WARNING TRAP… | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.259.10.1.51.1.2.11.1.2 |
| portOpticalMonitoringInfoVccThis object holds the value of the Vcc. It is measured in V. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.259.10.1.51.1.2.11.1.3 |
| portOpticalMonitoringInfoTxBiasCurrentTx Bias Current. It is measured in mA. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.259.10.1.51.1.2.11.1.4 |
| portOpticalMonitoringInfoTxPowerThis object holds the value of the transmitter optical signal power for the interface, measured in dBm. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or… | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.259.10.1.51.1.2.11.1.5 |
| portOpticalMonitoringInfoRxPowerThis object holds the value of the receiver optical signal power for the interface, measured in dBm. If the device support ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or hig… | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.259.10.1.51.1.2.11.1.6 |
.1.3.6.1.4.1.259.10.1.51.1.2.12
·
1 row entry
·
22 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portTransceiverThresholdInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::portTransceiverThresholdInfoTable'
This table lists the threshold of transceivers.
Identify the index of the transceiver
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| portTransceiverThresholdInfoIfIndexifindex. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.1 | ||||
| portTransceiverThresholdInfoTemperatureLowAlarmThis object holds the low alarm threshold of the transmitter laser diode temperature for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.2 | ||||
| portTransceiverThresholdInfoTemperatureLowWarnThis object holds the low warning threshold of the transmitter laser diode temperature for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.3 | ||||
| portTransceiverThresholdInfoTemperatureHighWarnThis object holds the high warning threshold of the transmitter laser diode temperature for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.4 | ||||
| portTransceiverThresholdInfoTemperatureHighAlarmThis object holds the high alarm threshold of the transmitter laser diode temperature for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.5 | ||||
| portTransceiverThresholdInfoVccLowAlarmThis object holds the low alarm threshold of the Vcc. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.6 | ||||
| portTransceiverThresholdInfoVccLowWarnThis object holds the low warning threshold of the Vcc. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.7 | ||||
| portTransceiverThresholdInfoVccHighWarnThis object holds the high warning threshold of the Vcc. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.8 | ||||
| portTransceiverThresholdInfoVccHighAlarmThis object holds the high alarm threshold of the Vcc. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.9 | ||||
| portTransceiverThresholdInfoTxBiasCurrentLowAlarmlow alarm threshold of Tx Bias Current. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.10 | ||||
| portTransceiverThresholdInfoTxBiasCurrentLowWarnlow warning threshold of Tx Bias Current. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.11 | ||||
| portTransceiverThresholdInfoTxBiasCurrentHighWarnhigh warning threshold of Tx Bias Current. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.12 | ||||
| portTransceiverThresholdInfoTxBiasCurrentHighAlarmhigh alarm threshold of Tx Bias Current. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.13 | ||||
| portTransceiverThresholdInfoTxPowerLowAlarmThis object holds the low alarm threshold of the transmitter optical signal power for theinterface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.14 | ||||
| portTransceiverThresholdInfoTxPowerLowWarnThis object holds the low warning threshold of the transmitter optical signal power for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.15 | ||||
| portTransceiverThresholdInfoTxPowerHighWarnThis object holds the high warning threshold of the transmitter optical signal power for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.16 | ||||
| portTransceiverThresholdInfoTxPowerHighAlarmThis object holds the high alarm threshold of the transmitter optical signal power for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.17 | ||||
| portTransceiverThresholdInfoRxPowerLowAlarmThis object holds the low alarm threshold of the receiver optical signal power for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.18 | ||||
| portTransceiverThresholdInfoRxPowerLowWarnThis object holds the low warning threshold of the receiver optical signal power for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.19 | ||||
| portTransceiverThresholdInfoRxPowerHighWarnThis object holds the high warning threshold of the receiver optical signal power for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.20 | ||||
| portTransceiverThresholdInfoRxPowerHighAlarmThis object holds the high alarm threshold of the receiver optical signal power for the interface. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.21 | ||||
| portTransceiverThresholdAutoModeIndicate the transceiver threshold is retrieved from EEPROM or configured by user. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.2.12.1.22 |
hardwarePortModeTable
table.1.3.6.1.4.1.259.10.1.51.1.2.16.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk hardwarePortModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::hardwarePortModeTable'
Table for Hardware profile port mode result.
Entry for Hardware profile port mode result.
Indexes
| Column | Syntax | OID |
|---|---|---|
| hardwarePortModeIfIndexThis is defined as the ifIndex. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.2.16.1.1.1 |
| hardwarePortModeOperThe Hardware profile operational port mode. This setting is used to identify the active state of port mode. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.2.16.1.1.2 |
| hardwarePortModeConfigThe Hardware profile configure port mode. This is used to configure hardware profile port mode settings. This action will reflect after the restart | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.2.16.1.1.3 |
trunkTable
table.1.3.6.1.4.1.259.10.1.51.1.3.3
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk trunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::trunkTable'
Table describing the configuration and status of each trunk.
An entry describing the configuration and status of a
particular trunk.
particular trunk.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| trunkIndexIdentifies the trunk within the switch that is described by the table entry. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.3.3.1.1 | ||||
| trunkPortsThe complete set of ports currently associated with this trunk. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.3.3.1.2 | ||||
| trunkCreationA value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.3.3.1.3 | ||||
| trunkStatusWriting this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.3.3.1.4 |
lacpPortTable
table.1.3.6.1.4.1.259.10.1.51.1.4.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk lacpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::lacpPortTable'
Table for LACP port configuration.
Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| lacpPortIndexThe port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.4.1.1.1 | ||||
| lacpPortStatusWhether 802.3ad LACP is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.4.1.1.2 | ||||
| lacpActorAdminModeSet the Actor Admin Mode to be active or passive. This corresponds to LACP_Activity of Actor_State. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.4.1.1.3 | ||||
| lacpPartnerAdminModeSet the Partner Admin Mode to be active or passive. This corresponds to LACP_Activity of Partner_State. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.4.1.1.4 |
staPortTable
table.1.3.6.1.4.1.259.10.1.51.1.5.2
·
1 row entry
·
15 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk staPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::staPortTable'
The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType.
The conceptual entry of staPortTable.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| staPortProtocolMigrationWhen operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns false(2) when read. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.3 | ||||
| staPortOperEdgePortThe operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.5 | ||||
| staPortAdminPointToPointThe administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.6 | ||||
| staPortOperPointToPointThe operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-de… | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.7 | ||||
| staPortSystemStatusPer-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.2.1.9 | ||||
| staPortLongAdminPathCostThe admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This obje… | Integer32r/w Constraints: range: 0-200000000 | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.10 | ||||
| staPortLongOperPathCostThe oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This objec… | Integer32 Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.11 | ||||
| staPortBpduFloodingThis parameter is used to configure the capability of BPDUs flooding. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.2.1.12 | ||||
| staPortBpduGuardA value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.2.1.15 | ||||
| staPortAdminEdgePortWithAutoThe administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) indicates that this port should be assumed as a non-edge-port a… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.16 | ||||
| staPortBpduFilterThe administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value of disabled(2) indicates that this port will not avoid trans… | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.2.1.17 | ||||
| staPortRootGuardStatusSpecifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.2.1.18 | ||||
| staPortBpduGuardAutoRecoveryA value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.2.1.19 | ||||
| staPortBpduGuardAutoRecoveryIntervalThe interval in seconds used by BPDU guard auto recovery mechanism. | Unsigned32r/w Constraints: range: 30-86400 | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.20 | ||||
| staPortTcPropStopStop topology change progate on this ifindex. Don't enable on potentially ring port. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.5.2.1.21 |
xstInstanceCfgTable
table.1.3.6.1.4.1.259.10.1.51.1.5.6.4
·
1 row entry
·
16 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk xstInstanceCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::xstInstanceCfgTable'
This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use, the mstInstanceEditIndex is always 0.
A conceptual row containing the property of the RST or MST instance.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| xstInstanceCfgIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.1 | ||||
| xstInstanceCfgPriorityThe priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. | Integer32r/w Constraints: range: 0-61440 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.2 | ||||
| xstInstanceCfgTimeSinceTopologyChangeThe time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. | SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.3 | ||||
| xstInstanceCfgTopChangesThe total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.4 | ||||
| xstInstanceCfgDesignatedRootThe bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the root identi… | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.5 | ||||
| xstInstanceCfgRootCostThe cost of the path to the root as seen from this bridge of the RST or MST. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.6 | ||||
| xstInstanceCfgRootPortThe number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.7 | ||||
| xstInstanceCfgMaxAgeThe maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it is discarded, in units of hundredths of a second. This is t… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.8 | ||||
| xstInstanceCfgHelloTimeThe amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying to become so, in units of hundredths of a second. This is the… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.9 | ||||
| xstInstanceCfgHoldTimeThis time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.10 | ||||
| xstInstanceCfgForwardDelayFor RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the por… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.11 | ||||
| xstInstanceCfgBridgeMaxAgeFor RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the val… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.12 | ||||
| xstInstanceCfgBridgeHelloTimeFor RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second. | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.13 | ||||
| xstInstanceCfgBridgeForwardDelayFor RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to… | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.14 | ||||
| xstInstanceCfgTxHoldCountFor RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.15 | ||||
| xstInstanceCfgPathCostMethodFor RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value o… | StaPathCostMode Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.6.4.1.16 |
xstInstancePortTable
table.1.3.6.1.4.1.259.10.1.51.1.5.6.5
·
1 row entry
·
11 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk xstInstancePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::xstInstancePortTable'
The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration.
The conceptual row for xstInstancePortTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| xstInstancePortPriorityDefines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active lin… | Integer32r/w Constraints: range: 0-240 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.3 | ||||
| xstInstancePortStateThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1): Port receives configuration messages, … | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.4 | ||||
| xstInstancePortEnableThe enabled/disabled status of the port. | P-BRIDGE-MIBEnabledStatus Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.5 | ||||
| xstInstancePortDesignatedRootThe unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the port is attached. | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.7 | ||||
| xstInstancePortDesignatedCostThe path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.8 | ||||
| xstInstancePortDesignatedBridgeThe bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. | BRIDGE-MIBBridgeId Type Constraints: range: 8 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.9 | ||||
| xstInstancePortDesignatedPortThe port identifier of the port on the designated bridge for this port's segment. | OctetString Constraints: range: 2-2 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.10 | ||||
| xstInstancePortForwardTransitionsThe number of times this port has transitioned from the learning state to the forwarding state. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.11 | ||||
| xstInstancePortPortRoleThe role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the bridge to the root bridge (i.e., root port) (3) The port … | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.12 | ||||
| xstInstancePortAdminPathCostThe admin value of the MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster med… | Integer32r/w Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.13 | ||||
| xstInstancePortOperPathCostThe oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attache… | Integer32 Constraints: range: 1-200000000 | .1.3.6.1.4.1.259.10.1.51.1.5.6.5.1.14 |
mstInstanceEditTable
table.1.3.6.1.4.1.259.10.1.51.1.5.6.6
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mstInstanceEditTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mstInstanceEditTable'
The Multiple Spanning Tree region instance vlan configuration table. Please read the actual instance vlan mapped in the mstInstanceOperTable.
A conceptual row containing the status of the MSTP instance.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mstInstanceEditIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.5.6.6.1.1 |
| mstInstanceEditVlansMapA string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.6.1.2 |
| mstInstanceEditVlansMap2kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.6.1.3 |
| mstInstanceEditVlansMap3kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.6.1.4 |
| mstInstanceEditVlansMap4kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug… | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.6.1.5 |
| mstInstanceEditRemainingHopsThe remaining hop count for this MST instance. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.5.6.6.1.6 |
mstInstanceOperTable
table.1.3.6.1.4.1.259.10.1.51.1.5.6.7
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mstInstanceOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mstInstanceOperTable'
The Multiple Spanning Tree region instance vlan mapped table.
A conceptual row containing the status of the MSTP instance.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mstInstanceOperIndexAn arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. | Integer32 Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.5.6.7.1.1 |
| mstInstanceOperVlansMapA string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.7.1.2 |
| mstInstanceOperVlansMap2kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.7.1.3 |
| mstInstanceOperVlansMap3kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.7.1.4 |
| mstInstanceOperVlansMap4kA string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.5.6.7.1.5 |
.1.3.6.1.4.1.259.10.1.51.1.5.8
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk staLoopbackDetectionPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::staLoopbackDetectionPortTable'
A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk
A conceptual row of staLoopbackDetectionPortTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| staLoopbackDetectionPortIfIndexThe port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.5.8.1.1 | ||||
| staLoopbackDetectionPortStatusStatus of the port on whether spanning tree loopback detection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.8.1.2 | ||||
| staLoopbackDetectionPortTrapStatusThe parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.5.8.1.3 | ||||
| staLoopbackDetectionPortReleaseModeSetting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicates that this port can be released from discarding state manu… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.5.8.1.4 | ||||
| staLoopbackDetectionPortReleaseSet this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.5.8.1.5 |
staTcPropGroupTable
table.1.3.6.1.4.1.259.10.1.51.1.5.10
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk staTcPropGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::staTcPropGroupTable'
Table describing the configuration of each TC propagation group.
An entry describing the configuration of a particular TC propagation group.
Indexes
| Column | Syntax | OID |
|---|---|---|
| staTcPropGroupIndexIdentifies the TC propagation group within the switch that is described by the table entry. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.5.10.1.1 |
| staTcPropGroupPortsThe complete set of ports currently associated with this TC propagation group. A port can only belong to one group. If a port detects a topology change, this port only notify other ports in the same group to propagate t… | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.5.10.1.2 |
mirrorTable
table.1.3.6.1.4.1.259.10.1.51.1.8.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mirrorTable'
Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be used as either source or destination ports.
The conceptual row of mirrorTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mirrorDestinationPortThe destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.8.1.1.1 | ||||
| mirrorSourcePortThe source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.8.1.1.2 | ||||
| mirrorTypeIf this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.8.1.1.3 | ||||
| mirrorStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.8.1.1.4 |
vlanMirrorTable
table.1.3.6.1.4.1.259.10.1.51.1.8.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanMirrorTable'
Table for VLAN mirroring, enabling a VLAN to be mirrored to a port.
The conceptual row of vlanMirrorTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanMirrorDestinationPortThe destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.8.2.1.1 | ||||
| vlanMirrorSourceVlanThe source VLAN for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094 | .1.3.6.1.4.1.259.10.1.51.1.8.2.1.2 | ||||
| vlanMirrorStatusSet this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.8.2.1.4 |
rspanTable
table.1.3.6.1.4.1.259.10.1.51.1.8.3
·
1 row entry
·
10 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk rspanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::rspanTable'
A table that contains the settings of RSPAN.
The conceptual row of rspanTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| rspanSessionIdThe session ID that may specify an entry in the table which contains destination port(s) information. | Integer32 Constraints: range: 1-2 | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.1 | ||||
| rspanSrcTxPortsSpecifies the source port list in tx mode. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.2 | ||||
| rspanSrcRxPortsSpecifies the source port list in rx mode. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.3 | ||||
| rspanDstPortThe port number of a destination port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.4 | ||||
| rspanDstPortTagSpecifies the traffic which is sent out from source port with RSPAN VLAN ID or not. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.5 | ||||
| rspanSwitchRoleSpecifies the role of current switch. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.6 | ||||
| rspanRemotePortsSpecifies the uplink port list. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.7 | ||||
| rspanRemoteVlanIdSpecifies the ID of a RSPAN VLAN. | Integer32r/w Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.8 | ||||
| rspanOperStatusThe operational status of the entry. A status of up(1) means the setting of a session is complete and it has started performing its function. A status of down(2) means no function is performed because of incompleted ses… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.8.3.1.9 | ||||
| rspanStatusSet this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.8.3.1.10 |
macMirrorTable
table.1.3.6.1.4.1.259.10.1.51.1.8.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk macMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::macMirrorTable'
Table for MAC mirroring, enabling a MAC address to be mirrored to a port.
The conceptual row of mirrorMacTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| macMirrorDestinationPortThe destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.8.4.1.1 | ||||
| macMirrorSourceMacAddrPackets with matching source MAC address will be monitored. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.8.4.1.2 | ||||
| macMirrorStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.8.4.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.9.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopRouterCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopRouterCurrentTable'
Table for current router ports.
Entry for current router ports.
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopRouterCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.8.1.1 |
| igmpSnoopRouterCurrentPortsThe set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.9.8.1.2 |
| igmpSnoopRouterCurrentStatusThe set of ports which are static router ports. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.9.8.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.9.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopRouterStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopRouterStaticTable'
Table for static router ports.
Entry for static router ports.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopRouterStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.9.1.1 | ||||
| igmpSnoopRouterStaticPortsThe set of ports which are static router ports. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.9.9.1.2 | ||||
| igmpSnoopRouterStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.9.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.9.10
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopMulticastCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopMulticastCurrentTable'
Table for current multicast addresses.
Entry for current multicast addresses.
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopMulticastCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.10.1.1 |
| igmpSnoopMulticastCurrentIpAddressIP address of multicast group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.9.10.1.2 |
| igmpSnoopMulticastCurrentPortsThe set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.9.10.1.3 |
| igmpSnoopMulticastCurrentStatusThe set of ports which are static members. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.9.10.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.9.11
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopMulticastStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopMulticastStaticTable'
Table for static multicast addresses.
Entry for static multicast addresses.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopMulticastStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.11.1.1 | ||||
| igmpSnoopMulticastStaticIpAddressIP address of multicast group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.9.11.1.2 | ||||
| igmpSnoopMulticastStaticPortsThe set of ports which are members. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.9.11.1.3 | ||||
| igmpSnoopMulticastStaticStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.11.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.9.14
·
1 row entry
·
14 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopCurrentVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopCurrentVlanTable'
Table for enabling or disabling IGMP snooping per VLAN.
Entry for enabling or disabling IGMP snooping.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopCurrentVlanIndexSame is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.1 | ||||
| igmpSnoopCurrentVlanStatusParameter to enable or disable IGMP snooping on this VLAN. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.14.1.2 | ||||
| igmpSnoopCurrentVlanImmediateLeaveThe parameter to enable or disable the Immediate-Leave feature on this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.14.1.3 | ||||
| igmpSnoopCurrentVlanGeneralQuerySuppressionThe parameter to enable or disable the general query suppresion on this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.14.1.4 | ||||
| igmpSnoopCurrentVlanLastMemQueryCountRepresents the number of queries sent by the switch before it assumes there are no local members. | Unsigned32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.5 | ||||
| igmpSnoopCurrentVlanLastMemQueryIntvlThe last member query interval is the max response time inserted into group-specific queries sent in response to leave group messages,and is also the the max response time inserted into group-and-source-specific query m… | Unsigned32r/w Constraints: range: 1-31744 | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.6 | ||||
| igmpSnoopCurrentVlanProxyAddressRepresents the address of queries sent by the switch. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.7 | ||||
| igmpSnoopCurrentVlanQueryIntvlRepresents the query interval of queries sent by the switch. | Unsigned32r/w Constraints: range: 2-31744 | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.8 | ||||
| igmpSnoopCurrentVlanQueryRespIntvlRepresents the query response interval of queries sent by the switch. | Unsigned32r/w Constraints: range: 10-31740 | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.9 | ||||
| igmpSnoopCurrentVlanProxyReportingSet this variable to enabled(1) to enable the feature. Set this variable to disabled(2) to disable the feature. Set this variable to default(3), the status of the feature is decided by the global configuration. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.10 | ||||
| igmpSnoopCurrentVlanVersionthe version of igmp packets is supported by this vlan. | Unsigned32r/w Constraints: range: 1-3 | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.11 | ||||
| igmpSnoopCurrentVlanVersionExclusiveEnable/disable control of the IGMP Snooping exclusive supported version. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.14.1.12 | ||||
| igmpSnoopCurrentVlanReportSupressionSet this variable to enabled(1) to enable the feature. Set this variable to disabled(2) to disable the feature. Set this variable to default(0), the status of the feature is decided by the global configuration. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.9.14.1.13 | ||||
| igmpSnoopCurrentVlanImmediateLeaveByHostIpThe parameter to enable or disable the Immediate-Leave feature by host ip on this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.14.1.14 |
.1.3.6.1.4.1.259.10.1.51.1.9.15
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopMulticastGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopMulticastGroupTable'
Table for current multicast addresses.
Entry for Group multicast addresses.
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopMulticastGroupVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopMul… | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.9.15.1.1 |
| igmpSnoopMulticastGroupIpAddressIP address of multicast group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.9.15.1.2 |
| igmpSnoopMulticastGroupSourceIPAddressSource IP address of source. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.9.15.1.3 |
| igmpSnoopMulticastGroupPortsThe set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.9.15.1.4 |
| igmpSnoopMulticastGroupStatusThe set of ports which are static IGMP member ports. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.9.15.1.5 |
igmpSnoopProfileTable
table.1.3.6.1.4.1.259.10.1.51.1.9.18
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopProfileTable'
The table for configuring the IGMP snooping profile.
The entry for configuring the IGMP snooping profile.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopProfileIdThe ID of the IGMP snooping profile. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.18.1.1 | ||||
| igmpSnoopProfileActionThe access mode of the IGMP snooping profile. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.9.18.1.2 | ||||
| igmpSnoopProfileStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.18.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.9.20
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopProfileRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopProfileRangeTable'
The table for configuring the range of the IGMP snooping profile.
The entry for configuring the range of the IGMP snooping
profile.
profile.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| igmpSnoopProfileRangeProfileIdThis is defined as igmpSnoopProfileId. | Unsigned32 Constraints: range: 1-4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.20.1.1 | ||||||||||||||
| igmpSnoopProfileRangeInetAddressTypeThe address type is associated with this agent. Only ipv4(1) type is supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.9.20.1.2 | ||||||||||||||
| igmpSnoopProfileRangeStartInetAddressThe specified addresses in the start of the controlled IP multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.9.20.1.3 | ||||||||||||||
| igmpSnoopProfileRangeEndInetAddressThe specified addresses in the end of the controlled IP multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.9.20.1.4 | ||||||||||||||
| igmpSnoopProfileRangeActionThe access mode of the IGMP snooping profile. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.9.20.1.5 |
igmpSnoopFilterPortTable
table.1.3.6.1.4.1.259.10.1.51.1.9.21
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopFilterPortTable'
Table for port configuration in IGMP filtering.
Entry for port configuration in IGMP filtering.
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopFilterPortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.21.1.1 |
| igmpSnoopFilterPortProfileIdThe igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.9.21.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.9.22
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopThrottlePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopThrottlePortTable'
Table for port configuration in IGMP throttling.
Entry for port configuration in IGMP throttling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopThrottlePortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.22.1.1 | ||||
| igmpSnoopThrottlePortRunningStatusDescribes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) indicates the IGMP throttling mechanism is inactive. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.9.22.1.2 | ||||
| igmpSnoopThrottlePortActionThe action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and the number of current joined multicast groups is equal to th… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.9.22.1.3 | ||||
| igmpSnoopThrottlePortMaxGroupsThe maximum number of IGMP groups that the interface can join. | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.10.1.51.1.9.22.1.4 | ||||
| igmpSnoopThrottlePortCurrentGroupsThe current number of IGMP groups that the interface has joined. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.9.22.1.5 |
igmpSnoopPortTable
table.1.3.6.1.4.1.259.10.1.51.1.9.27
·
1 row entry
·
16 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopPortTable'
Table of IGMP Snooping service per port.
Entry of IGMP Snooping service per port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopPortIndexThe port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.1 | ||||
| igmpSnoopQueryDropParameter to enable or disable dropping IGMP Query packet. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.3 | ||||
| igmpSnoopMulticastDataDropParameter to enable or disable dropping IP multicast data | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.4 | ||||
| igmpSnoopPortNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.5 | ||||
| igmpSnoopPortNumJoinSendNumber of join send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.6 | ||||
| igmpSnoopPortNumJoinsNumber of join recieved | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.7 | ||||
| igmpSnoopPortNumJoinSuccessNumber of join group success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.8 | ||||
| igmpSnoopPortNumLeavesSendNumber of leave send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.9 | ||||
| igmpSnoopPortNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.10 | ||||
| igmpSnoopPortNumGeneralQuerySendNumber of general query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.11 | ||||
| igmpSnoopPortNumGeneralQueryReceviedNumber of general query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.12 | ||||
| igmpSnoopPortNumSepcificQuerySendNumber of specific query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.13 | ||||
| igmpSnoopPortNumSpecificQueryReceivedNumber of specific query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.14 | ||||
| igmpSnoopPortNumInvalidReportNumber of invalid report received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.15 | ||||
| igmpSnoopPortClearStatisticsClear this VLAN all statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.16 | ||||
| igmpSnoopAuthenticationParameter to enable or disable IGMP Authentication | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.9.27.1.17 |
igmpSnoopQueryDropTable
table.1.3.6.1.4.1.259.10.1.51.1.9.30
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopQueryDropTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopQueryDropTable'
Table of IGMP Snooping query drop per vlan and per vlan configuration.
Entry of IGMP Snooping service per port and per VLAN.
Indexes
| Column | Syntax | OID |
|---|---|---|
| igmpSnoopQueryDropPortIndexThe port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the … | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.30.1.1 |
| igmpSnoopQueryDropVlanBitmapThe VLAN bitmap which query drop applied on this port. If all zero, it means disable, For all VLAN, please use igmpSnoopPortTable to configure. | OctetStringr/w Constraints: range: 512-512 | .1.3.6.1.4.1.259.10.1.51.1.9.30.1.2 |
igmpSnoopVlanTable
table.1.3.6.1.4.1.259.10.1.51.1.9.33
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk igmpSnoopVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::igmpSnoopVlanTable'
Table of IGMP Snooping service per port.
Entry of IGMP Snooping service per VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| igmpSnoopVlanIndexVLAN ID | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.1 | ||||
| igmpSnoopVlanNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.2 | ||||
| igmpSnoopVlanNumJoinSendNumber of join send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.3 | ||||
| igmpSnoopVlanNumJoinsNumber of join received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.4 | ||||
| igmpSnoopVlanNumJoinSuccessNumber of jion success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.5 | ||||
| igmpSnoopVlanNumLeavesSendNumber of leave send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.6 | ||||
| igmpSnoopVlanNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.7 | ||||
| igmpSnoopVlanNumGeneralQuerySendNumber of general query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.8 | ||||
| igmpSnoopVlanNumGeneralQueryReceviedNumber of general query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.9 | ||||
| igmpSnoopVlanNumSepcificQuerySendNumber of specific query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.10 | ||||
| igmpSnoopVlanNumSpecificQueryReceivedNumber of sepcific query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.11 | ||||
| igmpSnoopVlanNumInvalidReportNumber of invalid report received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.12 | ||||
| igmpSnoopVlanClearStatisticsClear this VLAN statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.9.33.1.13 |
dhcpcInterfaceTable
table.1.3.6.1.4.1.259.10.1.51.1.10.11.1.1.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpcInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpcInterfaceTable'
Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN), or may have many entries(e.g. for all ports, or for all static VLANs).
Entry for DHCP client information listed by interface.
Indexes
| Column | Syntax | OID |
|---|---|---|
| dhcpcIfIndexThis is defined by ifIndex in the IF-MIB.(static vlan if index) | Integer32 Constraints: range: 1-4093 | .1.3.6.1.4.1.259.10.1.51.1.10.11.1.1.1.1.1 |
| dhcpcIfVendorClassIdModeWhether the vendor class ID is in text mode or in Hex mode. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.10.11.1.1.1.1.4 |
| dhcpcIfVendorClassIdThe value that the DHCP client sets in the vendor class_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to identify vendor classof the client. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.10.11.1.1.1.1.5 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.2.4
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpRelayServerInetAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpRelayServerInetAddrTable'
The role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service user needs to specify Relay Server IP address and then restart DHCP Relay. This Table is to specify Relay Server IP address,the maximum numbers of server IP address user can specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart variable.
A conceptual row of dhcpRelayServerAddrTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpRelayServerInetAddrIfIndexThe VLAN interface being used by this table entry. | Integer32 Constraints: range: 1-4093 | .1.3.6.1.4.1.259.10.1.51.1.10.11.2.4.1.1 | ||||||||||||||
| dhcpRelayServerInetAddrIndexThe index of the Relay server IP address. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.10.11.2.4.1.2 | ||||||||||||||
| dhcpRelayServerInetAddressTypeThe INET address type of the relay server. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.2.4.1.3 | ||||||||||||||
| dhcpRelayServerInetAddressThe INET address of the relay server. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.2.4.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.2.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpv6RelayServerInetAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpv6RelayServerInetAddrTable'
The role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service user needs to specify Relay Server IPv6 address. This Table is to specify Relay Server IPv6 address, the maximum numbers of server IPv6 address user can specify is 5.
A conceptual row of dhcpv6RelayServerAddrTable.
| Column | Syntax | OID |
|---|---|---|
| dhcpv6RelayServerInetAddrIfIndexThe VLAN interface being used by this table entry. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.10.11.2.5.1.1 |
| dhcpv6RelayServerInetAddressThe INET address of the relay server. | INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16 | .1.3.6.1.4.1.259.10.1.51.1.10.11.2.5.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.2.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpv6RelayServerVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpv6RelayServerVlanTable'
The role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service user needs to specify multicast Relay Server Vlan. This Table is to specify multicast Relay Server Vlan.
A conceptual row of dhcpv6RelayServerVlanTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpv6RelayServerVlanIfIndexThe relay VLAN interface. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.10.11.2.6.1.1 | ||||
| dhcpv6RelayServerMcastIfIndexThe multicast relay destination VLAN interface. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.10.11.2.6.1.2 | ||||
| dhcpv6RelayServerVlanEnableThe status of multicast relay destination VLAN interface. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.2.6.1.3 |
dhcpPoolInetTable
table.1.3.6.1.4.1.259.10.1.51.1.10.11.3.9
·
1 row entry
·
9 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpPoolInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpPoolInetTable'
A DHCP pool is a collection of user configuration such as option config-lease time or DNS-server IPs, a network address for network pool, or a host IP plus a hardware address pair for host pool. However, a DHCP pool only can either be a network pool or a host pool, or none of them (such as that pool only containing option config no network address config or a host IP config as well).
A conceptual row of dhcpPoolInetTable.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpPoolInetPoolNamePool name, simply specify a string with its length NO MORE THAN 32. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.1 | ||||||||||||||
| dhcpPoolInetPoolTypePool type: notSpecified(1), network(2), host(3). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.2 | ||||||||||||||
| dhcpPoolInetAddressTypePool address type | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.3 | ||||||||||||||
| dhcpPoolInetAddressPool address | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.4 | ||||||||||||||
| dhcpPoolInetSubnetMaskTypesubnet mask type | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.5 | ||||||||||||||
| dhcpPoolInetSubnetMasksubnet mask | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.6 | ||||||||||||||
| dhcpPoolInetHardwareTypeHardware type: notSpecified(1), ethernet(2), ieee802(3) ,fddi(4). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.7 | ||||||||||||||
| dhcpPoolInetMacAddressMAC address. | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.8 | ||||||||||||||
| dhcpPoolInetStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.9.1.9 |
dhcpPoolInetOptionTable
table.1.3.6.1.4.1.259.10.1.51.1.10.11.3.10
·
1 row entry
·
9 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpPoolInetOptionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpPoolInetOptionTable'
This is the Option table of the dhcpPoolTable, user can specify options configuration in this table.
A conceptual row of dhcpPoolOptionTable.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpPoolInetOptionPoolNamePool name, simply specify a string with its length NO MORE THAN 32. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.1 | ||||||||||||||
| dhcpPoolInetOptionNextServerAddrTypeSpecifies the INET address type of the next server in the boot process. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.2 | ||||||||||||||
| dhcpPoolInetOptionNextServerAddrSpecifies the INET address of the next server in the boot process, which is typically a Trivial File Transfer Protocol(TFTP) server. One INET address is required. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.3 | ||||||||||||||
| dhcpPoolInetOptionNetbiosNodeTypeSpecifies the NetBIOS node type. Valid types are: none(1) b-node(2) - Broadcast p-node(3) - Peer-to-peer m-node(4) - Mixed h-node(5) - Hybrid. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.4 | ||||||||||||||
| dhcpPoolInetOptionDomainNameSpecifies the domain name string. | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.5 | ||||||||||||||
| dhcpPoolInetOptionBootFileTo specify the name of the default boot image. | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.6 | ||||||||||||||
| dhcpPoolInetOptionLeaseTimeTo configure the duration of the lease, in seconds, of an IP address that is assigned from a DHCP Server to a DHCP client. Valid values are from 1 to 31536000 (365 days), and a large number '7FFFFFFF'h, which is 'practi… | secondsInteger32r/w Constraints: range: 1-31536000range: 2147483647-2147483647 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.7 | ||||||||||||||
| dhcpPoolInetOptionCidModeSet this variable to text(2) or hex(3) to specify the mode of the client ID, which is useful for CLI to determine the display format of the client ID. The original value of object is set to 'notSpecified(… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.8 | ||||||||||||||
| dhcpPoolInetOptionCidBufferContent of Client Id. dhcpPoolOptionCidMode MUST be specified before setting this variable. | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.10.1.9 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.3.11
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpPoolInetOptionDnsSerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpPoolInetOptionDnsSerTable'
To specify the DNS IP servers available to a DHCP client, you can specify up to two addresses for each DHCP pool.
A conceptual row of dhcpPoolOptionDnsSerTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpPoolInetOptionDnsSerPoolNamePool name, simply specify a string with its length NO MORE THAN 32. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.11.1.1 | ||||||||||||||
| dhcpPoolInetOptionDnsSerIndexIndex of the DNS server. | Integer32 Constraints: range: 1-2 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.11.1.2 | ||||||||||||||
| dhcpPoolInetOptionDnsSerAddrTypeINET address type of the DNS server. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.11.1.3 | ||||||||||||||
| dhcpPoolInetOptionDnsSerAddrINET address of the DNS server. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.11.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.3.12
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpPoolOptInetDefaultRouterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpPoolOptInetDefaultRouterTable'
Specifies the default router list for a DHCP Client, you can specify up to two addresses for each DHCP pool.
A conceptual row of dhcpPoolOptDefaultRouterTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpPoolOptInetDefaultRouterPoolNamePool name, simply specify a string with its length NO MORE THAN 32. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.12.1.1 | ||||||||||||||
| dhcpPoolOptInetDefaultRouterIndexIndex of the default router. | Integer32 Constraints: range: 1-2 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.12.1.2 | ||||||||||||||
| dhcpPoolOptInetDefaultRouterAddrTypeSpecifies the INET address type of a router. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.12.1.3 | ||||||||||||||
| dhcpPoolOptInetDefaultRouterAddrSpecifies the INET address of a router. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.12.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.3.13
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpPoolOptInetNetbiosServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpPoolOptInetNetbiosServerTable'
To configure the NetBIOS WINS name servers that are available to DHCP clients. You can specify up to eight addressed for each DHCP pool.
A conceptual row of dhcpPoolOptNetbiosServerTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpPoolOptInetNetbiosServerPoolNamePool name, simply specify a string with its length NO MORE THAN 32 | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.13.1.1 | ||||||||||||||
| dhcpPoolOptInetNetbiosServerIndexIndex of the NetBIOS name Server. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.13.1.2 | ||||||||||||||
| dhcpPoolOptInetNetbiosServerAddrTypeSpecifies the INET address type of the NetBIOS WINS name server. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.13.1.3 | ||||||||||||||
| dhcpPoolOptInetNetbiosServerAddrSpecifies the INET address of the NetBIOS WINS name server. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.13.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.3.14
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpServerExcludedInetAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpServerExcludedInetAddrTable'
To specify IP addresses that a DHCP Server should not assign to DHCP clients.
A conceptual row of dhcpServerExcludedIpAddrTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpServerExcludedInetAddrLowAddrTypeThe excluded INET address type, or first INET address type in an excluded address range. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.14.1.1 | ||||||||||||||
| dhcpServerExcludedInetAddrLowAddrThe excluded INET address, or first INET address in an excluded address range. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.14.1.2 | ||||||||||||||
| dhcpServerExcludedInetAddrHighAddrTypeThe last INET address type in the excluded address range. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.14.1.3 | ||||||||||||||
| dhcpServerExcludedInetAddrHighAddrThe last INET address in the excluded address range. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.14.1.4 | ||||||||||||||
| dhcpServerExcludedInetAddrStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.14.1.5 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.3.15
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpServerInetLeaseBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpServerInetLeaseBindingTable'
To configure the address bindings on the DHCP server.
A conceptual row of dhcpServerLeaseBindingTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpServerInetLeaseBindingAddrTypeThe INET address type of the host as recorded on the DHCP server. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.15.1.1 | ||||||||||||||
| dhcpServerInetLeaseBindingAddrThe INET address of the host as recorded on the DHCP server. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.15.1.2 | ||||||||||||||
| dhcpServerInetLeaseBindingMacThe MAC address of the host as recorded on the DHCP Server. | OctetString Constraints: range: 6-6 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.15.1.3 | ||||||||||||||
| dhcpServerInetLeaseBindingLeaseTimeThe lease expiration date of the INET address of the host. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.15.1.4 | ||||||||||||||
| dhcpServerInetLeaseBindingStartTimeShow current system real time in sec. | OctetString Constraints: range: 20-20 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.15.1.5 | ||||||||||||||
| dhcpServerInetLeaseBindingStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.10.11.3.15.1.6 |
.1.3.6.1.4.1.259.10.1.51.1.10.11.3.16
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpPoolOptInetVendorSpecInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpPoolOptInetVendorSpecInfoTable'
To configure the option 43 Vendor Specific Information for DHCP clients. You can specify option type for each DHCP pool.
A conceptual row of dhcpPoolOptInetVendorSpecInfoTable.
| Column | Syntax | OID |
|---|---|---|
| dhcpPoolOptInetVendorSpecInfoPoolNamePool name, simply specify a string with its length NO MORE THAN 32 | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.16.1.1 |
| dhcpPoolOptInetVendorSpecInfoIndexIndex of the Vendor Specific Information. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.16.1.2 |
| dhcpPoolOptInetVendorSpecInfoModeSpecify the mode of the Vendor Specific Information, ascii(2) or hex(3) MUST be specified the content in dhcpPoolOptInetVendorSpecInfoBuffer, ip-address(4) MUST be specified the content in dhcpPoolOptInetVendorSpecInfoA… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.16.1.3 |
| dhcpPoolOptInetVendorSpecInfoBufferContent of option 43 Vendor Specific Information. dhcpPoolOptInetVendorSpecInfoMode MUST be specified before setting this variable. | OctetStringr/w Constraints: range: 0-48 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.16.1.4 |
| dhcpPoolOptInetVendorSpecInfoAddrSpecifies the INET address of the option 43 Vendor Specific Information. dhcpPoolOptInetVendorSpecInfoMode MUST be specified before setting this variable. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.10.11.3.16.1.5 |
pingHistoryTable
table.1.3.6.1.4.1.259.10.1.51.1.10.15.10
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk pingHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::pingHistoryTable'
Contains the executive result information for the ping operation.
A conceptual row in the pingHistory table.
Indexes
| Column | Syntax | OID |
|---|---|---|
| pingHistoryIndexA new entry in this table is created when the result of a ping probe is determined. The old entries will be cleared when a new ping action is started. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.10.1.51.1.10.15.10.1.1 |
| pingHistoryResponseThis variable represents the round trip time and is measured in milliseconds. The variable is the difference between received time and sent time for a ping probe. If the difference value is more than the time-out value … | millisecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.10.15.10.1.2 |
iPAddrTable
table.1.3.6.1.4.1.259.10.1.51.1.10.16
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk iPAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::iPAddrTable'
A table of iPAddrEntry.
A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresp…
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresp…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| iPAddrIfIndexThe VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.10.16.1.1 | ||||||||||||
| iPAddrIPAddressThe IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what … | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.10.16.1.2 | ||||||||||||
| iPAddrSubnetMaskThe subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out wha… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.10.16.1.3 | ||||||||||||
| iPAddrPrimaryInterfaceWhether this is a primary interface. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.10.16.1.4 | ||||||||||||
| iPAddrUnnumberedWhether this is an unnumbered interface. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.10.16.1.5 | ||||||||||||
| iPAddrStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.10.16.1.6 |
vlanTable
table.1.3.6.1.4.1.259.10.1.51.1.12.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanTable'
Table for VLAN configuration.
| Column | Syntax | OID |
|---|---|---|
| vlanIndexBased on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.12.1.1.1 |
| vlanAddressMethodMethod to get the IP address. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.12.1.1.2 |
vlanPortTable
table.1.3.6.1.4.1.259.10.1.51.1.12.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanPortTable'
Table for port configuration in VLAN.
Entry for port configuration in VLAN.
Indexes
| Column | Syntax | OID |
|---|---|---|
| vlanPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDG… | Integer32 Constraints: range: 1-48 | .1.3.6.1.4.1.259.10.1.51.1.12.2.1.1 |
| vlanPortModeThis variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.12.2.1.2 |
| vlanPortPrivateVlanTypeThe port type defined for private VLAN. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.12.2.1.3 |
voiceVlanOuiTable
table.1.3.6.1.4.1.259.10.1.51.1.12.6.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk voiceVlanOuiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::voiceVlanOuiTable'
A table containing the mac address which can be identified by Voice VLAN.
A table containing the mac address which can be identified
by Voice VLAN.
by Voice VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| voiceVlanOuiAddressMAC address can be identified by voice vlan. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.12.6.1.1.1 | ||||
| voiceVlanOuiMaskThe mask of MAC address. | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.12.6.1.1.2 | ||||
| voiceVlanOuiDescriptionThe description of OUI. | OctetStringr/w Constraints: range: 0-30 | .1.3.6.1.4.1.259.10.1.51.1.12.6.1.1.3 | ||||
| voiceVlanOuiStatusCurrent operation status of the row. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.6.1.1.4 |
voiceVlanPortTable
table.1.3.6.1.4.1.259.10.1.51.1.12.6.7
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk voiceVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::voiceVlanPortTable'
A list of voice VLAN port entries.
An entry containing Voice VLAN port information,
which is applicable to a Voice VLAN enabled interface.
which is applicable to a Voice VLAN enabled interface.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| voiceVlanPortIfIndexThe index of interface on which Voice VLAN function is enabled. | Integer32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.259.10.1.51.1.12.6.7.1.1 | ||||
| voiceVlanPortModeVoice VLAN configuration mode status. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.12.6.7.1.2 | ||||
| voiceVlanPortSecurityIf the security is enabled, the port only allows voice traffic for the Voice VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.6.7.1.3 | ||||
| voiceVlanPortPriorityThe priority of the voice vlan traffic in the port. | Integer32r/w Constraints: range: 0-6 | .1.3.6.1.4.1.259.10.1.51.1.12.6.7.1.4 | ||||
| voiceVlanPortRuleOuiThe address of voice device is learned from OUI table. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.6.7.1.5 | ||||
| voiceVlanPortRuleLldpThe address of voice device is learned from LLDP discovery. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.6.7.1.6 | ||||
| voiceVlanPortRemainAgeRemaining aging time, the unit of which is minute. | OctetString Constraints: range: 1-12 | .1.3.6.1.4.1.259.10.1.51.1.12.6.7.1.7 |
vlanDot1qTunnelPortTable
table.1.3.6.1.4.1.259.10.1.51.1.12.9
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanDot1qTunnelPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanDot1qTunnelPortTable'
Table for port configuration in 802.1Q Tunneling.
Entry for port configuration in 802.1Q Tunneling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanDot1qTunnelPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.12.9.1.1 | ||||
| vlanDot1qTunnelPortModeThis variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to access(2) sets as dot1q-tunnel mode port which link to customer. Setting it to uplink(3) sets as dot1q-tu… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.12.9.1.2 | ||||
| vlanDot1qTunnelPortEtherTypeTPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. | Unsigned32r/w Constraints: range: 2048-65535 | .1.3.6.1.4.1.259.10.1.51.1.12.9.1.3 | ||||
| vlanDot1qTunnelPortPriorityMapStatusStatus of priority mapping. Set to enabled(1) to use 802.1p priority of inner tag as packet's priority instead of using outer tag. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.9.1.4 |
macVlanTable
table.1.3.6.1.4.1.259.10.1.51.1.12.11
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk macVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::macVlanTable'
A table that contains the settings for MAC-based VLAN.
A conceptual row in the macVlanTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| macVlanMacAddressThe MAC address that may specify an entry in the table which contains MAC-based VLAN information. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.12.11.1.1 | ||||
| macVlanIdSpecifies the VLAN ID which the MAC address associates with. | Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094 | .1.3.6.1.4.1.259.10.1.51.1.12.11.1.2 | ||||
| macVlanPrioritySpecifies the priority whcich the MAC address associates with. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.12.11.1.3 | ||||
| macVlanStatusSet this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.11.1.4 | ||||
| macVlanMacMaskThe MAC address mask that may specify an entry in the table which contains MAC-based VLAN information. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.12.11.1.5 |
subnetVlanTable
table.1.3.6.1.4.1.259.10.1.51.1.12.13
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk subnetVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::subnetVlanTable'
A table that contains the settings for IP subnet-based VLAN.
A conceptual row in the subnetVlanTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| subnetVlanIpAddressThe IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnet… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.12.13.1.1 | ||||
| subnetVlanMaskThe netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the subnetVlanI… | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.12.13.1.2 | ||||
| subnetVlanIdSpecifies the VLAN ID which the subnet associates with. | Integer32r/w Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.12.13.1.3 | ||||
| subnetVlanPrioritySpecifies the priority whcich the subnet associates with. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.12.13.1.4 | ||||
| subnetVlanStatusSet this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.13.1.5 |
vlanStaticExtTable
table.1.3.6.1.4.1.259.10.1.51.1.12.15
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanStaticExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanStaticExtTable'
The extension table of dot1qVlanStaticTable. This table enhances the original table with extra vlanStaticExtRspanStatus to create and destroy RSPAN VLAN(s).
A conceptual row in the vlanStaticExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| vlanStaticExtRspanStatusDisplays type of a VLAN is vlan(2) or rspanVlan(3). Set this to destroy(1) to destroy a RSPAN VLAN. Set this to rspanVlan(3) to create a RSPAN VLAN. Setting this to vlan(2) is not allowed. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.12.15.1.1 |
.1.3.6.1.4.1.259.10.1.51.1.12.16
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanL2ProtocolTunnelPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanL2ProtocolTunnelPortTable'
Table for port configuration in Layer 2 Protocol Tunneling.
Entry for port configuration in Layer 2 Protocol
Tunneling.
Tunneling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanL2ptPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.12.16.1.1 | ||||
| vlanL2ptPortStaSet enabled(1) to enable Layer 2 protocol tunneling for spanning-tree protocol. Set disabled(2) to disable Layer 2 protocol tunneling for spanning-tree protocol. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.16.1.2 | ||||
| vlanL2ptPortLldpSet enabled(1) to enable Layer 2 protocol tunneling for LLDP. Set disabled(2) to disable Layer 2 protocol tunneling for LLDP. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.16.1.3 | ||||
| vlanL2ptPortCdpSet enabled(1) to enable Layer 2 protocol tunneling for Cisco Discovery Protocol. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco Discovery Protocol. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.16.1.4 | ||||
| vlanL2ptPortVtpSet enabled(1) to enable Layer 2 protocol tunneling for Cisco VTP. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco VTP. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.16.1.5 | ||||
| vlanL2ptPortPvstSet enabled(1) to enable Layer 2 protocol tunneling for Cisco PVST+. Set disabled(2) to disable Layer 2 protocol tunneling for Cisco PVST+. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.16.1.6 | ||||
| vlanL2ptPortLacpSet enabled(1) to enable Layer 2 protocol tunneling for LACP. Set disabled(2) to disable Layer 2 protocol tunneling for LACP. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.16.1.7 |
vlanStaticTable
table.1.3.6.1.4.1.259.10.1.51.1.12.17
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanStaticTable'
Table for static VLAN configuration including VLAN aggregation support.
Static information for a VLAN configured on the device by (local or
network) management.
network) management.
Indexes
| Column | Syntax | OID |
|---|---|---|
| vlanStaticIndexThe VLAN ID of the VLAN. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.12.17.1.1 |
| vlanStaticInterfaceTypeThe interface type of the VLAN (there is a subtype of IANAifType). l2vlan(135) refers to L2 interface and can't accept any L3 related configuration. l3ipvlan(136) refers to L3 interface and can accept L3 related configu… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.12.17.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.12.18
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanDot1qTunnelSrvCvidPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanDot1qTunnelSrvCvidPortTable'
Table for port configuration to specify how to insert outer tag by matching customer VLAN ID.
Entry for port configuration to specify how to insert
outer tag by matching customer VLAN ID.
outer tag by matching customer VLAN ID.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanDot1qTunnelSrvCvidPortIndexThe port interface of the vlanDot1qTunnelSrvCvidPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.12.18.1.1 | ||||
| vlanDot1qTunnelSrvCvidPortCvidSpecifies customer VLAN ID. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.12.18.1.2 | ||||
| vlanDot1qTunnelSrvCvidPortSvidSpecifies service VLAN ID. | Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094 | .1.3.6.1.4.1.259.10.1.51.1.12.18.1.3 | ||||
| vlanDot1qTunnelSrvCvidPortStatusSets to valid(1) to create an entry. Sets to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.18.1.5 | ||||
| vlanDot1qTunnelSrvCvidPortActionSets to assignSvid(2) to assign service VLAN ID. | Bitsr/w | .1.3.6.1.4.1.259.10.1.51.1.12.18.1.6 |
vlanTraslationPortTable
table.1.3.6.1.4.1.259.10.1.51.1.12.22
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk vlanTraslationPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::vlanTraslationPortTable'
A list of VLAN translation entries.
Entry for port configuration to set up
VLAN translation mapping.
VLAN translation mapping.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| vlanTraslationPortIndexThe port interface of vlanTraslationPortIndex. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.12.22.1.1 | ||||
| vlanTraslationPortOldVidThe VLAN translation is applied in both ingress and egress sides of the port. It makes the traffic arriving on the VLAN with this VLAN ID to be mapped to or tagged with the corresponding instance of vlanTraslationPortNe… | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.12.22.1.2 | ||||
| vlanTraslationPortNewVidSpecifies the new VLAN ID that will be mapped to. | Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094 | .1.3.6.1.4.1.259.10.1.51.1.12.22.1.3 | ||||
| vlanTraslationPortStatusSets to valid(1) to create an entry. Sets to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.12.22.1.4 | ||||
| vlanTraslationPortDirectionThe direction value of vlanTraslationPortDirection. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.12.22.1.5 |
prioIpDscpTable
table.1.3.6.1.4.1.259.10.1.51.1.13.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioIpDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioIpDscpTable'
Table for IP DSCP priority mapping.
Entry for IP DSCP priority mapping.
Indexes
| Column | Syntax | OID |
|---|---|---|
| prioIpDscpPortThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.13.4.1.1 |
| prioIpDscpValueValue of IP DSCP as specified in the packet header. | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.13.4.1.2 |
| prioIpDscpCosClass of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hardwar… | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.13.4.1.3 |
prioWrrTable
table.1.3.6.1.4.1.259.10.1.51.1.13.9
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioWrrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioWrrTable'
Table for weighted round robin (WRR).
Entry for weighted round robin (WRR).
Indexes
| Column | Syntax | OID |
|---|---|---|
| prioWrrTrafficClassTraffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.13.9.1.1 |
| prioWrrWeightWeight for this entry. | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.13.9.1.2 |
rateLimitPortTable
table.1.3.6.1.4.1.259.10.1.51.1.16.1.2
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk rateLimitPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::rateLimitPortTable'
Table for rate limit of each port.
Entry for rate limit of each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| rlPortIndexThe port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.1.2.1.1 | ||||
| rlPortInputStatusWhether input rate limit is enabled for this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.16.1.2.1.6 | ||||
| rlPortOutputStatusWhether output rate limit is enabled for this port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.16.1.2.1.7 | ||||
| rlPortInputLimitInKiloValue of the input rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.16.1.2.1.10 | ||||
| rlPortOutputLimitInKiloValue of the output rate limit. Its unit is kilobits per second. For a 100 Mbps port, the range is 64 to 100000. For a 1000 Mbps port, the range is 64 to 1000000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.16.1.2.1.11 |
prioAclToCosMappingTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioAclToCosMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioAclToCosMappingTable'
Table for ACL to CoS Mapping.
Entry for ACL to CoS Mapping.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| prioAclToCosMappingIfIndexThe port interface of the prioAclToCosMappingEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.1.1.1 | ||||||||||||
| prioAclToCosMappingAclNameThe name of an IP ACL. Within a feature a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.10.1.51.1.16.3.1.1.2 | ||||||||||||
| prioAclToCosMappingCosValueCoS value of the prioAclToCosMappingTable. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.3.1.1.3 | ||||||||||||
| prioAclToCosMappingStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.3.1.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.16.3.2
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioIfClassificationModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioIfClassificationModeTable'
Table for setting the interface Qos mapping classification mode.
Entry for setting the interface Qos mapping classification mode.
Indexes
| Column | Syntax | OID |
|---|---|---|
| prioIfClassificationModeIfThe port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.2.1.1 |
| prioIfClassificationModeStatusThe Qos mapping classification mode of the interface. cos mode means that the internal priority is mapped from priority field of packet's VLAN tag if a VLAN tag exists; IP precedence mode means that the internal priorit… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.3.2.1.2 |
prioCosToDscpTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.3
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioCosToDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioCosToDscpTable'
Table for CoS/CFI to internal QoS label mapping.
Entry for CoS/CFI to internal QoS label mapping.
| Column | Syntax | OID |
|---|---|---|
| prioCosToDscpIfValueThe port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.3.1.1 |
| prioCosToDscpCosValueThe CoS value (0~7) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.3.3.1.2 |
| prioCosToDscpCFIValueThe CFI value (0 or 1) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). | Integer32 Constraints: range: 0-1 | .1.3.6.1.4.1.259.10.1.51.1.16.3.3.1.3 |
| prioCosToDscpDscpValueThe DSCP value used to represent the internal QoS label (3 bits PHB+2 bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB value of QoS label; The LSB 2 bits of DSCP are used to represent the drop prec… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.3.3.1.4 |
prioPrecToDscpTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioPrecToDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioPrecToDscpTable'
Table for IP precedence to internal QoS label mapping. This table setting will take effect only when the interface QoS mapping classification mode is set to IP precedence mode.
Entry for IP precedence to internal QoS label mapping.
| Column | Syntax | OID |
|---|---|---|
| prioPrecToDscpIfValueThe port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.4.1.1 |
| prioPrecToDscpPrecValueThe IP precedence value mapped to internal QoS label value which is composed of PHB (3 bits) and drop precedence (2 bits). | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.3.4.1.2 |
| prioPrecToDscpDscpValueThe DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP are used to represent PHB value of QoS label; The LSB 2 bits of DSCP are used to represent the drop prece… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.3.4.1.3 |
prioDscpToDscpTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.5
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioDscpToDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioDscpToDscpTable'
Table for DSCP to internal QoS label mapping. This table setting will take effect only when the interface Qos mapping classification mode is set to DSCP mode.
Entry for ingress DSCP to internal QoS label mapping.
| Column | Syntax | OID |
|---|---|---|
| prioDscpToDscpIfValueThe port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.5.1.1 |
| prioDscpToDscpIngressDscpValueThe ingress DSCP value which will be mapped to internal QoS label value. | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.3.5.1.2 |
| prioDscpToDscpDscpValueThe DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP are used to represent PHB value of Qos label. The LSB 2 bits of DSCP are used to represent the drop prece… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.3.5.1.3 |
prioDstPortToDscpTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.6
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioDstPortToDscpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioDstPortToDscpTable'
Table for TCP/UDP destination port number to internal Qos label mapping. This table setting will always take effect for TCP/UDP packets no matter of what interface QoS mapping classification mode is set.
Entry for TCP/UDP destination port to internal QoS label mapping.
| Column | Syntax | OID |
|---|---|---|
| prioDstPortToDscpIfValueThe port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.6.1.1 |
| prioDstPortToDscpProtocolValueThe protocol value (TCP:6, UDP:17) which will be mapped to internal QoS label value. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.16.3.6.1.2 |
| prioDstPortToDscpDstPortValueThe destination port number value which will be mapped to internal QoS label value. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.3.6.1.3 |
| prioDstPortToDscpDscpValueThe DSCP value used to represent internal QoS label (3 bits PHB + 2 bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB value of QoS label. The LSB 2 bits of DSCP is used to represent the drop precede… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.3.6.1.4 |
prioDscpToCosTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.7
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioDscpToCosTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioDscpToCosTable'
Table for internal QoS label to CoS and CFI mapping.
Entry for internal QoS label to CoS and CFI mapping.
| Column | Syntax | OID |
|---|---|---|
| prioDscpToCosIfValueThe port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.7.1.1 |
| prioDscpToCosPHBValueThe PHB value of internal QoS label. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.3.7.1.2 |
| prioDscpToCosDropPrecedenceValueThe drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.16.3.7.1.3 |
| prioDscpToCosCFICosValueThe remarked CFI and CoS value mapped from the internal Qos label value when the packet leaves the device. The egress remarked CFI value equals to (prioDscpToCosCFICosValue >>3) and the egress remarked CoS value equals … | Integer32r/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.10.1.51.1.16.3.7.1.4 |
prioPrioToDropPrecTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioPrioToDropPrecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioPrioToDropPrecTable'
Table for packet priority to drop precedence mapping.
Entry for packet priority to drop precedence mapping.
| Column | Syntax | OID |
|---|---|---|
| prioPrioToDropPrecIfValueThe port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.8.1.1 |
| prioPrioToDropPrecPriorityValueThe value of packet default priority. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.3.8.1.2 |
| prioPrioToDropPrecPrecValueThe drop precedence value of internal QoS label. Green(0),Yellow(3), Red(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.3.8.1.3 |
prioDscpToQueueTable
table.1.3.6.1.4.1.259.10.1.51.1.16.3.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk prioDscpToQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::prioDscpToQueueTable'
Table for PHB to queue mapping.
Entry for PHB to queue mapping.
| Column | Syntax | OID |
|---|---|---|
| prioDscpToQueueIfValueThe port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.3.9.1.1 |
| prioDscpToQueuePHBValueThe PHB value of internal QoS label. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.3.9.1.2 |
| prioDscpToQueueQueueValueThe queue value which is mapped from the PHB value of QoS label. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.3.9.1.3 |
diffServPolicyMapTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.10
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServPolicyMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServPolicyMapTable'
Table for policy map.
Entry for policy map.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServPolicyMapIndexAn index that uniquely identifies an entry in this table. | Integer32 Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.16.4.10.1.1 | ||||||||||||
| diffServPolicyMapNameThe name of this entry. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.10.1.2 | ||||||||||||
| diffServPolicyMapDescriptionThe description of this entry. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.10.1.3 | ||||||||||||
| diffServPolicyMapElementIndexListThe octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indicates the diffServPolicyMapEntrys which belong to this entry. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.259.10.1.51.1.16.4.10.1.4 | ||||||||||||
| diffServPolicyMapStatusThis object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'active', which indi… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.10.1.5 |
.1.3.6.1.4.1.259.10.1.51.1.16.4.12
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServPolicyMapElementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServPolicyMapElementTable'
Table for policy map element.
Entry for policy map element.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServPolicyMapElementIndexAn index that uniquely identifies an entry in this table. | Integer32 Constraints: range: 1-512 | .1.3.6.1.4.1.259.10.1.51.1.16.4.12.1.1 | ||||||||||||
| diffServPolicyMapElementClassMapIndexSpecifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry as identified by the same value of diffServClassMapIndex. | Integer32r/w Constraints: range: 1-512 | .1.3.6.1.4.1.259.10.1.51.1.16.4.12.1.2 | ||||||||||||
| diffServPolicyMapElementMeterIndexSpecifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identified by the same value of diffServMeterIndex. If this value is … | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.16.4.12.1.3 | ||||||||||||
| diffServPolicyMapElementActionIndexSpecifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identified by the same value of diffServActionIndex. | Integer32r/w Constraints: range: 1-512 | .1.3.6.1.4.1.259.10.1.51.1.16.4.12.1.4 | ||||||||||||
| diffServPolicyMapElementStatusThis object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has six defined values: - 'acti… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.12.1.5 |
diffServClassMapTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.13
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServClassMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServClassMapTable'
Table for class map.
Entry for class map.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServClassMapIndexAn index that uniquely identifies an entry in this table. | Integer32 Constraints: range: 1-512 | .1.3.6.1.4.1.259.10.1.51.1.16.4.13.1.1 | ||||||||||||
| diffServClassMapNameThe name of this entry. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.13.1.2 | ||||||||||||
| diffServClassMapDescriptionThe description of this entry. | OctetStringr/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.13.1.3 | ||||||||||||
| diffServClassMapMatchTypeThe map match type of this entry. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.13.1.4 | ||||||||||||
| diffServClassMapElementIndexTypeListThe octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element index in network order and it maps the index of differServCla… | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.259.10.1.51.1.16.4.13.1.5 | ||||||||||||
| diffServClassMapElementIndexListThe octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the particular class map elements which belong to this table. The … | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.259.10.1.51.1.16.4.13.1.6 | ||||||||||||
| diffServClassMapStatusThis object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active'… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.13.1.7 |
diffServAclTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.15
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServAclTable'
Table for ACL.
Entry for ACL.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServAclIndexAn index that uniquely identifies an entry in the ACL table. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.15.1.1 | ||||||||||||
| diffServAclNameThe name of this entry. | OctetStringr/w Constraints: range: 1-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.15.1.2 | ||||||||||||
| diffServAclTypeThe type of this entry. When the value of ACL type is modified, then the ACEs in the diffServAclAceIndexList of this entry will be auto-removed, and this entry will be auto- unbound from the diffServPortTable and the di… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.15.1.3 | ||||||||||||
| diffServAclAceIndexListThe octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs which belong to this table. The ACE uses type to indicate th… | OctetString Constraints: range: 0-255 | .1.3.6.1.4.1.259.10.1.51.1.16.4.15.1.4 | ||||||||||||
| diffServAclStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: - 'active', which indicates that the conceptual row is availa… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.15.1.5 |
diffServIpAceTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.17
·
1 row entry
·
20 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServIpAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServIpAceTable'
Table for IP ACE.
Entry for IP ACE.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServIpAceIndexAn index that uniquely identifies an entry in the IP ACE table. | Integer32 Constraints: range: 1-512 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.1 | ||||||||||||
| diffServIpAceTypeThe specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.2 | ||||||||||||
| diffServIpAceAccessIndicates the action to be taken if a packet matches this ACE. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.3 | ||||||||||||
| diffServIpAceSourceIpAddrThe specified source IP address. The packet's source address is AND-ed with the value of IpAceSourceIpAddrBitmask and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.4 | ||||||||||||
| diffServIpAceSourceIpAddrBitmaskThe specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.5 | ||||||||||||
| diffServIpAceDestIpAddrThe specified destination IP address. The packet's destination address is AND-ed with the value of diffServIpAceDestIpAddrBitmask and then compared against the value of this object. This object may not be modified if th… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.6 | ||||||||||||
| diffServIpAceDestIpAddrBitmaskThe specified destination IP address mask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.7 | ||||||||||||
| diffServIpAceProtocolThe protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'any'. For example: 0 is IP, 1 is ICMP, 2 is IGM… | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.8 | ||||||||||||
| diffServIpAcePrecSpecifies the IP precedence value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 8. This object may not be modified if the associated diffServIpAceType object is … | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.9 | ||||||||||||
| diffServIpAceTosSpecifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 9. This object may not be modified if the associated diffServIpAceType object i… | Integer32r/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.10 | ||||||||||||
| diffServIpAceDscpSpecifies the DSCP value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 64. This object may not be modified if the associated diffServIpAceType object is equal to… | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.11 | ||||||||||||
| diffServIpAceSourcePortOpIndicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the source TCP/UDP port number. equal(2), which is used the diffSe… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.12 | ||||||||||||
| diffServIpAceMinSourcePortIf the diffServIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.13 | ||||||||||||
| diffServIpAceSourcePortBitmaskIf the diffServIpAceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpAceMinSourcePort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.15 | ||||||||||||
| diffServIpAceDestPortOpIndicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. equal(2), which is … | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.16 | ||||||||||||
| diffServIpAceMinDestPortIf the diffServIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.17 | ||||||||||||
| diffServIpAceDestPortBitmaskIf the diffServIpAceDestPortOp is equal(2), this indicates the bitmask of the diffServIpAceMinDestPort. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.19 | ||||||||||||
| diffServIpAceControlCodeIndicates how the control flags of TCP packets are to be compared. diffServIpAceControlCode is AND-ed with diffServIpAceControlCodeBitmask. This object may not be modified if the associated diffServIpAceType object is e… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.20 | ||||||||||||
| diffServIpAceControlCodeBitmaskIndicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32. This object may not… | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.21 | ||||||||||||
| diffServIpAceStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.17.1.22 |
diffServMacAceTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.18
·
1 row entry
·
32 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServMacAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServMacAceTable'
Table for MAC ACE.
Entry for MAC ACE.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServMacAceIndexAn index that uniquely identifies an entry in the MAC ACE table. | Integer32 Constraints: range: 1-512 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.1 | ||||||||||||
| diffServMacAceAccessIndicates the action to be taken if a packet matches this ACE. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.2 | ||||||||||||
| diffServMacAcePktformatUsed to check the packet format of the packets. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.3 | ||||||||||||
| diffServMacAceSourceMacAddrIndicates the 48-bit source MAC address. The specified source MAC of the packet. The packet's source MAC address is AND-ed with the value of diffServMacAceSourceMacAddrBitmask and then compared against the value of this… | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.4 | ||||||||||||
| diffServMacAceSourceMacAddrBitmaskThe specified source MAC address mask. | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.5 | ||||||||||||
| diffServMacAceDestMacAddrIndicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of diffServMacAceDestMacAddrBitmask and then compared against the … | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.6 | ||||||||||||
| diffServMacAceDestMacAddrBitmaskThe specified destination MAC address mask. | SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.7 | ||||||||||||
| diffServMacAceVidOpIndicates how a packet's VID is to be compared. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.8 | ||||||||||||
| diffServMacAceMinVidIndicates the lower bound of the VID value range if the diffServMacAceVidOp is range(3). | Integer32r/w Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.9 | ||||||||||||
| diffServMacAceVidBitmaskThe bit mask of the VID. The default value is 0. | Integer32r/w Constraints: range: 0-4095 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.10 | ||||||||||||
| diffServMacAceEtherTypeOpIndicates how a packet's ether type is to be compared. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.12 | ||||||||||||
| diffServMacAceEtherTypeBitmaskThe bit mask of Ether type. The default value is 0. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.13 | ||||||||||||
| diffServMacAceMinEtherTypeIndicates the lower bound of the ether type value range if the diffServMacAceEtherTypeOp is range(3). | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.14 | ||||||||||||
| diffServMacAceStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.16 | ||||||||||||
| diffServMacAceCosOpIndicates how a packet's CoS is compared. If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing, and diffServMacAceCosBitmask is used as the bitmask of the CoS… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.17 | ||||||||||||
| diffServMacAceCosBitmaskIndicates the bitmask of the CoS value if the object type of diffServMacAceCosOp is equal(2). The default value is 0. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.18 | ||||||||||||
| diffServMacAceMinCosIf the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing. If the object type of diffServMacAceCosOp is range(3), diffServMacAceMinCos indicates the lower bound of… | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.19 | ||||||||||||
| diffServMacAceSourceIpAddrIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified source IP address. The packet's source address is AND-ed with the value … | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.32 | ||||||||||||
| diffServMacAceSourceIpAddrBitmaskIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified source IP address mask. The packet's source address is AND-ed with the v… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.33 | ||||||||||||
| diffServMacAceDestIpAddrIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified destination IP address. The packet's destination address is AND-ed with … | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.34 | ||||||||||||
| diffServMacAceDestIpAddrBitmaskIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '0800'h, this specified destination IP address mask. The packet's source address is AND-ed with … | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.35 | ||||||||||||
| diffServMacAceSourceIpv6AddrIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the source IPv6 address. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.36 | ||||||||||||
| diffServMacAceSourceIpv6AddrPrefixLenIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the length (in bits) associated with the source IPv6 address prefix of t… | Integer32r/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.37 | ||||||||||||
| diffServMacAceDestIpv6AddrIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the destination IPv6 address. This object may not be modified if the ass… | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.38 | ||||||||||||
| diffServMacAceDestIpv6AddrPrefixLenIf the diffServMacAceEtherTypeOp is equal(2), diffServMacAceEtherTypeBitmask is 'FFFF'h, and diffServMacAceMinEtherType is '86DD'h, this specifies the length (in bits) associated with the destination IPv6 address prefix… | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.39 | ||||||||||||
| diffServMacAceIpProtocolThe protocol number field in the IP header (or the next header field in the IPv6 header) used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The object=256 means 'a… | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.40 | ||||||||||||
| diffServMacAceL4SourcePortOpIndicates how a packet's L4 source port is compared. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.41 | ||||||||||||
| diffServMacAceL4SourcePortIf the object type of diffServMacAceL4SourcePortOp is equal(2), this indicates the l4 source port value for comparing. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.42 | ||||||||||||
| diffServMacAceL4SourcePortBitmaskIf the object type of diffServMacAceL4SourcePortOp is equal(2), this indicates the bitmask for diffServMacAceL4SourcePort | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.43 | ||||||||||||
| diffServMacAceL4DestPortOpIndicates how a packet's L4 destination port is compared. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.44 | ||||||||||||
| diffServMacAceL4DestPortIf the object type of diffServMacAceL4DestPortOp is equal(2), this indicates the l4 destination port value for comparing. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.45 | ||||||||||||
| diffServMacAceL4DestPortBitmaskIf the object type of diffServMacAceL4SourcePortOp is equal(2), this indicates the bitmask for diffServMacAceL4DestPort | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.18.1.46 |
diffServActionTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.19
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServActionTable'
Table for action.
Entry for action.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServActionIndexAn index that uniquely identifies an entry in the action table. | Integer32 Constraints: range: 1-512 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.1 | ||||||||||||
| diffServActionListThe bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same time on the entry. The actionRedPktNewDscp and actionRedDrop … | Bitsr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.2 | ||||||||||||
| diffServActionPktNewPriSpecifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object can not be set. | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.3 | ||||||||||||
| diffServActionPktNewPhbSpecifies the inner priority value for the packet when the action is satisfied. If the actionPktNewPhb bit of the diffServActionList is not enabled, this object can not be set. | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.4 | ||||||||||||
| diffServActionGreenPktTransmitThe actionGreenPktTransmit bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the green marking packet will be Transmitted. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.5 | ||||||||||||
| diffServActionGreenPktNewDscpSpecifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionGreenPktNewDscp object is 64. If the actionGreenPktNewDscp bit of the dif… | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.6 | ||||||||||||
| diffServActionYellowPktNewDscpSpecifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionYellowPktNewDscp object is 64. If the actionYellowPktNewDscp bit of the d… | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.7 | ||||||||||||
| diffServActionYellowPktDropThe actionYellowPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.8 | ||||||||||||
| diffServActionRedPktNewDscpSpecifies the new DSCP value for the red marking packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionRedPktNewDscp object is 64. If the actionRedPktNewDscp bit of… | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.9 | ||||||||||||
| diffServActionRedPktDropThe actionRedPktDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.10 | ||||||||||||
| diffServActionStatusThis object is used to create a new row, modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active', whi… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.11 | ||||||||||||
| diffServActionPktNewIpPrecSpecifies the new precedence value for the packet when the action is satisfied. If the actionPktNewIpPrec bit of the diffServActionList is not enabled, this object can not be set. | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.12 | ||||||||||||
| diffServActionPktNewDscpSpecifies the new DSCP value for the packet when the action is satisfied. If the actionPktNewDscp bit of the diffServActionList is not enabled, this object can not be set. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.16.4.19.1.13 |
diffServMeterTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.20
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServMeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServMeterTable'
Table for meter.
Entry for meter.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServMeterIndexAn entry that describes a single set of token bucket parameters. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.16.4.20.1.1 | ||||||||||||
| diffServMeterModelThe Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.20.1.2 | ||||||||||||
| diffServMeterRateThe token-bucket rate, in kilobits per second (kbps). | Integer32r/w Constraints: range: 0-1000000 | .1.3.6.1.4.1.259.10.1.51.1.16.4.20.1.3 | ||||||||||||
| diffServMeterBurstSizeThe maximum number of bytes in a single transmission burst. | Integer32r/w Constraints: range: 0-16000000 | .1.3.6.1.4.1.259.10.1.51.1.16.4.20.1.4 | ||||||||||||
| diffServMeterStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.20.1.6 | ||||||||||||
| diffServMeterPeakRateThe token-bucket rate, in kilobits per second (kbps). | Integer32r/w Constraints: range: 0-1000000 | .1.3.6.1.4.1.259.10.1.51.1.16.4.20.1.7 | ||||||||||||
| diffServMeterPeakBurstSizeThe maximum number of bytes in a double transmission burst. | Integer32r/w Constraints: range: 0-16000000 | .1.3.6.1.4.1.259.10.1.51.1.16.4.20.1.8 |
diffServIpv6AceTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.21
·
1 row entry
·
15 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServIpv6AceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServIpv6AceTable'
Table for IPv6 ACE.
Entry fo IPv6 ACE.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServIpv6AceIndexAn index that uniquely identifies an entry in the IPv6 table. | Integer32 Constraints: range: 1-2048 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.1 | ||||||||||||
| diffServIpv6AceTypeThe specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field of this entry will be set 0. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.2 | ||||||||||||
| diffServIpv6AceAccessIndicates the action to be taken if a packet matches this ACE. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.3 | ||||||||||||
| diffServIpv6AceSourceIpAddrSpecifies the source IPv6 address. | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.4 | ||||||||||||
| diffServIpv6AceSourceIpAddrPrefixLenThe length (in bits) associated with the source IPv6 address prefix of this entry. | Integer32r/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.5 | ||||||||||||
| diffServIpv6AceDestIpAddrSpecifies the destination IPv6 address. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.6 | ||||||||||||
| diffServIpv6AceDestIpAddrPrefixLenThe length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.7 | ||||||||||||
| diffServIpv6AceDscpSpecifies the DSCP value to match against. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.9 | ||||||||||||
| diffServIpv6AceStatusThis object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six defined values: - 'active… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.11 | ||||||||||||
| diffServIpv6AceSourcePortOpIndicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the source TCP/UDP port number. equal(2), which uses the diff… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.13 | ||||||||||||
| diffServIpv6AceSourcePortIf the diffServIpv6AceSourcePortOp is equal(2), this indicates the TCP/UDP port number value. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.14 | ||||||||||||
| diffServIpv6AceSourcePortBitmaskIf the diffServIpv6AceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpv6AceSourcePort. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.15 | ||||||||||||
| diffServIpv6AceDestPortOpIndicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made with the destination TCP/UDP port number. equal(2), which use… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.16 | ||||||||||||
| diffServIpv6AceDestPortIf the diffServIpv6AceDestPortOp is equal(2), this indicates the TCP/UDP port number value. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.17 | ||||||||||||
| diffServIpv6AceDestPortBitmaskIf the diffServIpv6AceDestPortOp is equal(2), this indicates the bitmask of the diffServIpv6AceDestPort. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.259.10.1.51.1.16.4.21.1.18 |
diffServArpAceTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.23
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServArpAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServArpAceTable'
The conceptual table of all of diffServArpAceEntry.
The conceptual row for diffServArpAceTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServArpAceIndexThe unique index of an ACE within an ACL. | Integer32 Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.1 | ||||||||||||
| diffServArpAceActionIndicates the action to be taken if a packet matches this ACE. This object cannot not be configured when the status of the entry, diffServArpAceStatus, is active(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.2 | ||||||||||||
| diffServArpAcePktTypeIndicates the packet type to be taken if a packet matches this ACE. This object can not be configured when the status of the entry, diffServArpAceStatus, is active(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.3 | ||||||||||||
| diffServArpAceSourceIpAddrThe specified source ARP address. The packet's source address is AND'ed with the value of diffServArpAceSourceIpAddrBitmask and then compared against the value of this object. This object cannot be configured when the s… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.4 | ||||||||||||
| diffServArpAceSourceIpAddrBitmaskThe specified source ARP address mask. The packet's destination address is AND'ed with the value of diffServArpAceSourceIpAddr and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.5 | ||||||||||||
| diffServArpAceDestIpAddrThe specified destination IP address. The packet's destination address is AND'ed with the value of diffServArpAceDestIpAddrBitmask and then compared against the value of this object. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.6 | ||||||||||||
| diffServArpAceDestIpAddrBitmaskThe specified destination IP address mask. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.7 | ||||||||||||
| diffServArpAceSourceMacAddrIndicates the 48-bit destination MAC address. The specified source MAC of the packet. The packet's source MAC address is AND'ed with the value of aceArpSourceMacAddrBitmask and then compared against the value of this ob… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.8 | ||||||||||||
| diffServArpAceSourceMacAddrBitmaskThe specified source MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.9 | ||||||||||||
| diffServArpAceDestMacAddrIndicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND'ed with the value of aceArpDestMacAddrBitmask and then compared against the value of… | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.10 | ||||||||||||
| diffServArpAceDestMacAddrBitmaskThe specified destination MAC address mask. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | OctetStringr/w Constraints: range: 6-6 | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.11 | ||||||||||||
| diffServArpAceLogStatusIndicates whether to log messages against the packets. This object cannot be configured when the status of the entry, diffServArpAceStatus, is active(1). | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.12 | ||||||||||||
| diffServArpAceStatusThe status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicate… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.23.1.13 |
diffServArpTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.24
·
1 row entry
·
1 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServArpTable'
The conceptual table of all of diffServArpEntry.
The conceptual row for diffServArpTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| diffServArpAclNameThe name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.259.10.1.51.1.16.4.24.1.1 |
.1.3.6.1.4.1.259.10.1.51.1.16.4.26
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServAclHwCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServAclHwCounterTable'
Table for differentiated services hardware counter on each port.
Entry for differentiated services hardware counter on
each port.
each port.
| Column | Syntax | OID |
|---|---|---|
| diffServAclHwCounterIfIndexThis object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.4.26.1.1 |
| diffServAclHwCounterDirectionIndicates a particular direction of traffic. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.16.4.26.1.2 |
| diffServAclHwCounterAclIndexAn index that uniquely identifies an entry in the ACL table. | Integer32 Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.16.4.26.1.3 |
| diffServAclHwCounterAceIndexAn index that uniquely identifies an entry of an ACL. This entry might be a compressed ACE (which index is bigger than SYS_ADPT_MAX_NBRS_OF_ACE_OF_SYSTEM) with multiple user configured ACEs, and the index of compressed … | Integer32 Constraints: range: 0-2048 | .1.3.6.1.4.1.259.10.1.51.1.16.4.26.1.4 |
| diffServAclHwCounterAceHitCountSpecifies the hardware counter of an ACE entry. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.16.4.26.1.5 |
.1.3.6.1.4.1.259.10.1.51.1.16.4.27
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServPolicyMapPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServPolicyMapPortTable'
Table for policy map of each port.
Entry for diffServPolicyMapPortTable.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServPolicyMapPortIfIndexThis object is the interface index of DiffServPolicyMapPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.4.27.1.1 | ||||||||||||
| diffServPolicyMapPortDirectionIndicates this policy map effect to which direction of traffic. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.16.4.27.1.2 | ||||||||||||
| diffServPolicyMapPortPolicyMapIndexSpecifies the policy map index binded to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyM… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.16.4.27.1.3 | ||||||||||||
| diffServPolicyMapPortStatusThis object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active'… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.27.1.4 |
diffServAccessGroupTable
table.1.3.6.1.4.1.259.10.1.51.1.16.4.28
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk diffServAccessGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::diffServAccessGroupTable'
Table for specifies access group for ACL on each port.
Entry for diffServAccessGroupTable.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| diffServAccessGroupIfIndexThis object is the interface index of diffServAccessGroupEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. If support glo… | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.16.4.28.1.1 | ||||||||||||
| diffServAccessGroupDirectionIndicates this access group effect on which direction of traffic. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.16.4.28.1.2 | ||||||||||||
| diffServAccessGroupTypeSpecifies the access group type, only supports binding one ACL on a port. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.16.4.28.1.3 | ||||||||||||
| diffServAccessGroupAclIndexSpecifies the ACL index applied to this access group. The index uniquely identifies an entry in diffServAclTable. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.16.4.28.1.4 | ||||||||||||
| diffServAccessGroupTimeRangeNameThe name of the time range entry bound to the access group. This object should be equal to one of the timeRangeName objects in timeRangeTable. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.16.4.28.1.5 | ||||||||||||
| diffServAccessGroupCounterStatusThe acl counter enable status of this access group. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.16.4.28.1.6 | ||||||||||||
| diffServAccessGroupStatusThis object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six defined values: - 'active'… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.16.4.28.1.7 |
privateVlanVlanTable
table.1.3.6.1.4.1.259.10.1.51.1.17.1.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::privateVlanVlanTable'
A table containing private VLAN information on the VLANs which currently exist.
A conceptual row containing the private VLAN
information on the VLANs for a particular management
domain.
information on the VLANs for a particular management
domain.
Indexes
| Column | Syntax | OID |
|---|---|---|
| privateVlanVlanIndexThe VLAN ID of this private VLAN. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.259.10.1.51.1.17.1.4.1.1 |
| privateVlanVlanTypeThe VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already exists, set others to modifiy it. Note that a VLAN's private V… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.1.4.1.2 |
| privateVlanAssoicatedPrimaryVlanThe VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanVlanType has the value of primary(2), then this object has th… | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.17.1.4.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.17.1.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanPrivatePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::privateVlanPrivatePortTable'
A table containing information on the configuration of secondary VLANs on the device ports.
A conceptual row containing information of the
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feat…
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feat…
Indexes
| Column | Syntax | OID |
|---|---|---|
| privateVlanPrivatePortIfIndexThis is defined as the ifIndex. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.1.5.1.1 |
| privateVlanPrivatePortSecondaryVlanThe VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress traffic of its associated primary VLAN, but blocks the egre… | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.17.1.5.1.2 |
privateVlanPromPortTable
table.1.3.6.1.4.1.259.10.1.51.1.17.1.6
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanPromPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::privateVlanPromPortTable'
A table containing secondary VLAN to primary VLAN remapping information on ports of the device.
A conceptual row containing secondary VLAN to primary
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
privat…
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
privat…
Indexes
| Column | Syntax | OID |
|---|---|---|
| privateVlanPromPortIfIndexThis is defined as ifIndex. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.1.6.1.1 |
| privateVlanPromPortPrimaryVlanIdThe primary VLAN ID of the promiscous port. | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.17.1.6.1.2 |
| privateVlanPromPortSecondaryRemapA string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 through 7; the second octet to VLANs 8 through 15; etc. The mos… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.17.1.6.1.3 |
| privateVlanPromPortSecondaryRemap2kA string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 1024 t… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.17.1.6.1.4 |
| privateVlanPromPortSecondaryRemap3kA string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 2048 t… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.17.1.6.1.5 |
| privateVlanPromPortSecondaryRemap4kA string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 3072 t… | OctetString Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.17.1.6.1.6 |
privateVlanSessionTable
table.1.3.6.1.4.1.259.10.1.51.1.17.1.8
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk privateVlanSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::privateVlanSessionTable'
Contains the settings for private VLAN Session.
A conceptual row in the privateVlanSession table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| privateVlanSessionIdThe session ID that may specifiy certain entry in the table which contains private VLAN session information. | Integer32 Constraints: range: 1-4 | .1.3.6.1.4.1.259.10.1.51.1.17.1.8.1.1 | ||||
| privateVlanSessionUplinkPortsThis is the list of uplink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortDownlink of the same session, and they also should not overlap with the privateVlanSessionPortUplink… | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.17.1.8.1.2 | ||||
| privateVlanSessionDownlinkPortsThis is the list of downlink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortUplink of the same session, and they also should not overlap with the privateVlanSessionPortUplink… | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.17.1.8.1.3 | ||||
| privateVlanSessionStatusSet this to valid(1) to create an entry. Sets this to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.1.8.1.4 |
portSecPortTable
table.1.3.6.1.4.1.259.10.1.51.1.17.2.1
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk portSecPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::portSecPortTable'
The port security(MAC binding) Table.
The entry of portSecPortTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| portSecPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.2.1.1.1 | ||||
| portSecPortStatusSet enabled(1) to enable port security and set disabled(2) to disable port security. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.2.1.1.2 | ||||
| portSecActionThe corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this variable is set to trap(2), a swPortSecurityTrap trap will be s… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.2.1.1.3 | ||||
| portSecMaxMacCountThe maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the num… | Integer32r/w Constraints: range: 0-1024 | .1.3.6.1.4.1.259.10.1.51.1.17.2.1.1.4 | ||||
| portSecStickyMacStatusSet enabled(1) to start sticky MAC feature for preventing dynamic secure MAC addresses port move. Set disabled(2) to stop sticky MAC feature. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.2.1.1.8 |
radiusServerTable
table.1.3.6.1.4.1.259.10.1.51.1.17.4.7
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk radiusServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::radiusServerTable'
The table for RADIUS server.
The conceptual row for radiusServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| radiusServerIndexThe RADIUS server index in the table. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.1 | ||||
| radiusServerAddressIP address of a RADIUS server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.2 | ||||
| radiusServerAuthPortNumberAuthentication port number of RADIUS server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.3 | ||||
| radiusServerAcctPortNumberAccounting port number of RADIUS server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.4 | ||||
| radiusServerKeyKey for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. | OctetStringr/w Constraints: range: 0-48 | .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.5 | ||||
| radiusServerRetransmitTimeout for RADIUS. | Integer32r/w Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.6 | ||||
| radiusServerTimeoutTimeout for RADIUS. | Integer32r/w Constraints: range: 1-10 | .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.7 | ||||
| radiusServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.4.7.1.8 |
tacacsPlusServerTable
table.1.3.6.1.4.1.259.10.1.51.1.17.5.4
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk tacacsPlusServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::tacacsPlusServerTable'
The table for TACACS+ server.
The conceptual row for tacacsPlusServerTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| tacacsPlusServerIndexTACACS+ server index. | Integer32 Constraints: range: 1-1 | .1.3.6.1.4.1.259.10.1.51.1.17.5.4.1.1 | ||||
| tacacsPlusServerAddressIP address of a TACACS+ server. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.17.5.4.1.2 | ||||
| tacacsPlusServerPortNumberTCP port number of a TACACS+ server. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.10.1.51.1.17.5.4.1.3 | ||||
| tacacsPlusServerKeyThe encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When this variable is read, it always returns a zero-length string. | OctetStringr/w Constraints: range: 0-48 | .1.3.6.1.4.1.259.10.1.51.1.17.5.4.1.4 | ||||
| tacacsPlusServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.5.4.1.8 |
sshConnInfoTable
table.1.3.6.1.4.1.259.10.1.51.1.17.6.6
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sshConnInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::sshConnInfoTable'
The table for Secure Shell Connection.
The conceptual row for sshConnInfoTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sshConnIDThe connection ID of the Secure Shell Connection. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.17.6.6.1.1 |
| sshConnMajorVersionThe SSH major version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.17.6.6.1.2 |
| sshConnMinorVersionThe SSH minor version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.17.6.6.1.3 |
| sshConnStatusThe SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start Sta… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.17.6.6.1.5 |
| sshConnUserNameThe user name of the connection. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.17.6.6.1.6 |
| sshDisconnectSet the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.6.6.1.7 |
| sshConnEncryptionTypeStrThe encryption type of the SSH. | OctetString Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.17.6.6.1.8 |
sshUserTable
table.1.3.6.1.4.1.259.10.1.51.1.17.6.29
·
1 row entry
·
18 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sshUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::sshUserTable'
The conceptual table of all of sshUserEntry.
The conceptual row for sshUserTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| sshUserNameUser Name. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.1 |
| sshUserRsaKey1The RSA user key segment 1. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.2 |
| sshUserRsaKey2The RSA user key segment 2. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.3 |
| sshUserRsaKey3The RSA user key segment 3. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.4 |
| sshUserRsaKey4The RSA user key segment 4. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.5 |
| sshUserRsaKey5The RSA user key segment 5. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.6 |
| sshUserRsaKey6The RSA user key segment 6. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.7 |
| sshUserRsaKey7The RSA user key segment 7. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.8 |
| sshUserRsaKey8The RSA user key segment 8. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.9 |
| sshUserDsaKey1The DSA user key segment 1. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.10 |
| sshUserDsaKey2The DSA user key segment 2. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.11 |
| sshUserDsaKey3The DSA user key segment 3. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.12 |
| sshUserDsaKey4The DSA user key segment 4. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.13 |
| sshUserDsaKey5The DSA user key segment 5. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.14 |
| sshUserDsaKey6The DSA user key segment 6. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.15 |
| sshUserDsaKey7The DSA user key segment 7. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.16 |
| sshUserDsaKey8The DSA user key segment 8. | KeySegment Type Constraints: range: 0..128 | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.17 |
| sshUserKeyDelActionTo delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(4) to delete both RSA and DSA user key. … | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.6.29.1.18 |
ipFilterSnmpInetTable
table.1.3.6.1.4.1.259.10.1.51.1.17.9.12
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterSnmpInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ipFilterSnmpInetTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through SNMP.
will allow to connect to this device through SNMP.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ipFilterSnmpInetAddressTypeThe type of IP address filter. Only supports IPv4 and IPv6 address types. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.9.12.1.1 | ||||||||||||||
| ipFilterSnmpInetAddressStartThe start IP address. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.9.12.1.2 | ||||||||||||||
| ipFilterSnmpInetAddressEndThe end IP address. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.9.12.1.3 | ||||||||||||||
| ipFilterSnmpInetStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.9.12.1.4 |
ipFilterHttpInetTable
table.1.3.6.1.4.1.259.10.1.51.1.17.9.13
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterHttpInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ipFilterHttpInetTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow to connect to this device through SNMP.
will allow to connect to this device through SNMP.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ipFilterHttpInetAddressTypeThe type of IP address filter . Only supports IPv4 and IPv6 address types. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.9.13.1.1 | ||||||||||||||
| ipFilterHttpInetAddressStartThe start IP address. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.9.13.1.2 | ||||||||||||||
| ipFilterHttpInetAddressEndThe end IP address. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.9.13.1.3 | ||||||||||||||
| ipFilterHttpInetStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.9.13.1.4 |
ipFilterTelnetInetTable
table.1.3.6.1.4.1.259.10.1.51.1.17.9.14
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipFilterTelnetInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ipFilterTelnetInetTable'
A list of IP address entries.
This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.
will allow them to connect to this device through SNMP.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ipFilterTelnetInetAddressTypeThe type of IP address filter . Only supports IPv4 and IPv6 address types. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.9.14.1.1 | ||||||||||||||
| ipFilterTelnetInetAddressStartThe start IP address. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.9.14.1.2 | ||||||||||||||
| ipFilterTelnetInetAddressEndThe end IP address. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.9.14.1.3 | ||||||||||||||
| ipFilterTelnetInetStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.9.14.1.4 |
userAuthTable
table.1.3.6.1.4.1.259.10.1.51.1.17.10.5
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk userAuthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::userAuthTable'
This table is for creating the new user.
Entries in this table correspond to the users entries in system.
Indexes
| Column | Syntax | OID |
|---|---|---|
| userAuthUserNameThe name of the user. The user name is starting with alphanumeric. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.17.10.5.1.1 |
| userAuthPasswordSpecifies the user password. zero length input will set the user enrty without password. If the user is not exist, it will create the user with the giving password and privilege 0. The password is starting with alphanum… | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.259.10.1.51.1.17.10.5.1.2 |
| userAuthPrivilegeSpecifies the user level. If the user is not exist, it will create the user with the giving privilege with none password. Privilege 15 is maximum privilege that only can be applied to system administrator. | Integer32r/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.17.10.5.1.3 |
| userAuthPublicKeyUser public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.10.1.51.1.17.10.5.1.4 |
| userAuthStatusThis node is used to create the user entry by '1' and to delete one user entry by '0'. | Integer32r/w Constraints: range: 0-1 | .1.3.6.1.4.1.259.10.1.51.1.17.10.5.1.5 |
dot1xAuthConfigExtTable
table.1.3.6.1.4.1.259.10.1.51.1.17.11.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dot1xAuthConfigExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dot1xAuthConfigExtTable'
The extension table of dot1xAuthConfigTable.
The entry of dot1xAuthConfigExtTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| dot1xAuthConfigExtOperModeThe operation mode of dot1x port which allows host connection to 802.1x-authorized ports. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.11.1.1.1 |
| dot1xAuthConfigExtMultiHostMaxCntThe maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. | Integer32r/w Constraints: range: 1-1024 | .1.3.6.1.4.1.259.10.1.51.1.17.11.1.1.2 |
| dot1xAuthConfigExtPortIntrusionActionResponses to intrusion when the authentication is failed; block-traffic(1) means that to block traffic when the authentication is failed and guest-vlan(2) means that to join to a guest VLAN when the authentication is fa… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.11.1.1.3 |
aaaMethodTable
table.1.3.6.1.4.1.259.10.1.51.1.17.12.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaMethodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::aaaMethodTable'
Contains the settings needed for accounting.
A conceptual row in the aaaMethodTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaMethodIndexSpecifies the index for the entry. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.17.12.1.1.1 | ||||
| aaaMethodNameName for the method. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.259.10.1.51.1.17.12.1.1.2 | ||||
| aaaMethodGroupNameName for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.259.10.1.51.1.17.12.1.1.3 | ||||
| aaaMethodModestart-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting record is sent in the background. The requested user process b… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.12.1.1.4 | ||||
| aaaMethodStatusSet to 1 to initiate the aaaMethodTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.12.1.1.5 | ||||
| aaaMethodClientTypedot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console; commands(3): Provides accounting service for command privileges. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.12.1.1.6 | ||||
| aaaMethodPrivilegeLevelSpecifies the privilege level for the entry. When aaaMethodClientType is in the mode of command(3), the privilege level is enabled to be accessed. | Integer32r/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.17.12.1.1.7 |
aaaRadiusGroupTable
table.1.3.6.1.4.1.259.10.1.51.1.17.12.2
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaRadiusGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::aaaRadiusGroupTable'
Uses a subset of RADIUS servers for accounting as defined by the server group
A conceptual row of aaaRadiusGroupEntry.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaRadiusGroupIndexSpecifies the index for the entry. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.17.12.2.1.1 | ||||
| aaaRadiusGroupServerBitMapIdentifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.259.10.1.51.1.17.12.2.1.2 | ||||
| aaaRadiusGroupNameUses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.10.1.51.1.17.12.2.1.3 | ||||
| aaaRadiusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.12.2.1.4 |
aaaTacacsPlusGroupTable
table.1.3.6.1.4.1.259.10.1.51.1.17.12.3
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaTacacsPlusGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::aaaTacacsPlusGroupTable'
Uses a subset of TACACS+ servers for accounting as defined by the server group
A conceptual row of aaaTacacsPlusGroupEntry.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaTacacsPlusGroupIndexSpecifies the index for the entry. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.17.12.3.1.1 | ||||
| aaaTacacsPlusGroupServerBitMapIdentifies which TACACS+ sever to use. | OctetStringr/w Constraints: range: 1-1 | .1.3.6.1.4.1.259.10.1.51.1.17.12.3.1.2 | ||||
| aaaTacacsPlusGroupNameUses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.10.1.51.1.17.12.3.1.3 | ||||
| aaaTacacsPlusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.12.3.1.4 |
aaaAccountTable
table.1.3.6.1.4.1.259.10.1.51.1.17.12.5
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaAccountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::aaaAccountTable'
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
A conceptual row of aaaAccountTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| aaaAccountIfIndexDefined as the ifIndex | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.12.5.1.1 | ||||
| aaaAccountMethodNameSpecifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.10.1.51.1.17.12.5.1.2 | ||||
| aaaAccountProtocolGet the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.17.12.5.1.3 | ||||
| aaaAccountStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.12.5.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.17.12.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaCommandPrivilegesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::aaaCommandPrivilegesTable'
Contains the settings needed for command privileges.
A conceptual row in the aaaCommandPrivilegesTable.
| Column | Syntax | OID |
|---|---|---|
| aaaCommandPrivilegesLevelSpecifies the privilege level index for the entry. | Integer32 Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.17.12.8.1.1 |
| aaaCommandPrivilegesInterfaceIndexSpecifies the interface index for the entry. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.17.12.8.1.2 |
| aaaCommandPrivilegesMethodNameSpecifies the method name in the lists under the mode of command privileges. | OctetStringr/w Constraints: range: 1-64 | .1.3.6.1.4.1.259.10.1.51.1.17.12.8.1.3 |
aaaAccExecTable
table.1.3.6.1.4.1.259.10.1.51.1.17.12.9
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk aaaAccExecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::aaaAccExecTable'
Specifies an interface or a set of interfaces that the accounting method list will be applied to.
A conceptual row of aaaAccExecTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| aaaAccExecIndexThe method of accessing CLI management. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.17.12.9.1.1 |
| aaaAccExecMethodNameSpecifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.10.1.51.1.17.12.9.1.2 |
networkAccessPortTable
table.1.3.6.1.4.1.259.10.1.51.1.17.13.2
·
1 row entry
·
10 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk networkAccessPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::networkAccessPortTable'
A table contains the information of network access about every port.
A conceptual row in the networkAccessPort table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| networkAccessPortPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same interface identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.1 | ||||
| networkAccessPortDynamicVlanSets enabled(1) to enable dynamic VLAN assigment and sets disabled(2) to disable dynamic VLAN assigment. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.2 | ||||
| networkAccessPortMaxMacCountSpecifies the maximum number of authenticated MAC address. | Integer32r/w Constraints: range: 0-1024 | .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.3 | ||||
| networkAccessPortModeSpecifies the secure port mode. enabled(1) means that Mac address authentication is used and disabled(2) means that the authentication is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.4 | ||||
| networkAccessPortMacFilterSpecifies the MAC filter ID, Set this variable to zero to disable MAC filter. | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.5 | ||||
| networkAccessPortGuestVlanSpecifies the guest VLAN ID. To disable the VLAN, set the value to 0. | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.6 | ||||
| networkAccessPortLinkDetectionStatusSet this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.7 | ||||
| networkAccessPortLinkDetectionModeSpecifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. Set this object to linkUpDown(3) to detect both link up and l… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.8 | ||||
| networkAccessPortLinkDetectionAcitonSpecifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDetection event is triggered. Set this object to shutDown(2) t… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.9 | ||||
| networkAccessPortDynamicQosSet this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.13.2.1.10 |
.1.3.6.1.4.1.259.10.1.51.1.17.13.4
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk networkAccessMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::networkAccessMacAddressTable'
Contains the information of network access MAC addresses.
A conceptual row in the networkAccessMacAddress table.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| networkAccessMacAddressAddressSpecifies the authenticated MAC address. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.17.13.4.1.1 | ||||||||||||||
| networkAccessMacAddressPortSpecifies the port of authenticated MAC address. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.13.4.1.2 | ||||||||||||||
| networkAccessMacAddressInetAddressTypeThis object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.13.4.1.3 | ||||||||||||||
| networkAccessMacAddressRadiusServerInetAddressDisplays the IP address of radius server that authenticates the specified Mac address. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.13.4.1.4 | ||||||||||||||
| networkAccessMacAddressTimeDisplays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is preceded by a zer… | OctetString Constraints: range: 12-12 | .1.3.6.1.4.1.259.10.1.51.1.17.13.4.1.5 | ||||||||||||||
| networkAccessMacAddressAttributeDisplays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.17.13.4.1.6 |
.1.3.6.1.4.1.259.10.1.51.1.17.13.6
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk networkAccessMacFilterWithMaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::networkAccessMacFilterWithMaskTable'
Contains the settings for MAC filter.
A conceptual row in the networkAccessMacFilterWithMaskTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| networkAccessMacFilterWithMaskIDSpecifies the MAC filter ID. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.259.10.1.51.1.17.13.6.1.1 | ||||
| networkAccessMacFilterWithMaskMacAddressSpecifies the MAC address to be filtered. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.17.13.6.1.2 | ||||
| networkAccessMacFilterWithMaskMacAddressMaskSpecifies the MAC mask to be filtered. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.17.13.6.1.3 | ||||
| networkAccessMacFilterWithMaskStatusSet this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.13.6.1.4 |
macAuthPortTable
table.1.3.6.1.4.1.259.10.1.51.1.17.14.2
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk macAuthPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::macAuthPortTable'
Contains the settings for mac authentication of each port.
A conceptual row in the macAuthPort table.
Indexes
| Column | Syntax | OID |
|---|---|---|
| macAuthPortIndexThe port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.14.2.1.1 |
| macAuthPortMaxMacCountSpecifies the maximum number of authenticated MAC addresses for MAC authentication. | Integer32r/w Constraints: range: 0-1024 | .1.3.6.1.4.1.259.10.1.51.1.17.14.2.1.2 |
| macAuthPortIntrusionActionResponses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthorized clients to the access network. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.14.2.1.3 |
webAuthPortConfigTable
table.1.3.6.1.4.1.259.10.1.51.1.17.15.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk webAuthPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::webAuthPortConfigTable'
Contains the settings for web authentication of each port.
A conceptual row in the webAuthPortConfigTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| webAuthPortConfigPortIndexThe port number of the port that may specify certain entry in the table which contains web authentication information. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.15.9.1.1 | ||||
| webAuthPortConfigStatusSets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.15.9.1.2 | ||||
| webAuthPortConfigAuthenticatedHostCountDisplays the authenticated host counts for each port | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.17.15.9.1.3 |
webAuthPortInfoTable
table.1.3.6.1.4.1.259.10.1.51.1.17.15.10
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk webAuthPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::webAuthPortInfoTable'
Contains the information for web authentication of each port.
A conceptual row in the webAuthPortTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| webAuthPortInfoPortIndexThe port number for which this entry contains web authentication information. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.15.10.1.1 | ||||||||||||||
| webAuthPortInfoPortAuthSuccessIndexThe authentication success number of port for which this entry contains web authentication information. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.17.15.10.1.2 | ||||||||||||||
| webAuthPortInfoInetAddressTypeThis object indicates the type of IP address denoted in webAuthPortInfoIpAddress type. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.17.15.10.1.3 | ||||||||||||||
| webAuthPortInfoInetAddressThe IP address which may specify the entry containing web authentication information. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.17.15.10.1.4 | ||||||||||||||
| webAuthPortInfoRemainingSessiontimeThe remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-authenticate again. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.17.15.10.1.5 | ||||||||||||||
| webAuthPortInfoStatusDisplays the web authentication status for each port. authenticated (1) means the user is authenticated. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.17.15.10.1.6 |
appFilterPortTable
table.1.3.6.1.4.1.259.10.1.51.1.17.17.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk appFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::appFilterPortTable'
The application filter Table.
The entry of appFilterPortTable.
| Column | Syntax | OID |
|---|---|---|
| appFilterPortIndexThe port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.17.17.1.1.1 |
| appFilterProtocolTypeThe protocol type define some specific packets which are supported on this function | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.17.17.1.1.2 |
| appFilterPktStatusSet discard(1) to discard packet and set default(0) to transmit packet in default behavior. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.17.17.1.1.3 |
arpProxyArpTable
table.1.3.6.1.4.1.259.10.1.51.1.18.1.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk arpProxyArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::arpProxyArpTable'
A list of Proxy ARP status. This table has entries for all static VLANs.
An entry in the table, containing information about Proxy ARP
configuration.
configuration.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| arpProxyArpIfIndexThis is defined as a VLAN interface. A routing interface is a VLAN that binds an IP subnet. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.18.1.4.1.1 | ||||
| arpProxyArpStatusEnable or disable proxy ARP process on an interface. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.18.1.4.1.2 |
remoteLogServerInetTable
table.1.3.6.1.4.1.259.10.1.51.1.19.6.7
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk remoteLogServerInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::remoteLogServerInetTable'
A table for storing the remote log server list.
A conceptual row for remoteLogServerInetTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| remoteLogServerInetAddressTypeIndicates the type of address denoted in remoteLogServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.19.6.7.1.1 | ||||||||||||||
| remoteLogServerInetAddressThe IP address of the remote log Server. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.19.6.7.1.2 | ||||||||||||||
| remoteLogServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.19.6.7.1.3 | ||||||||||||||
| remoteLogServerUdpPortThe UDP port number of the remote log Server | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.259.10.1.51.1.19.6.7.1.4 |
smtpServerIpTable
table.1.3.6.1.4.1.259.10.1.51.1.19.7.4
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk smtpServerIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::smtpServerIpTable'
The SMTP server IP table. The maximum servers to be added is 3.
A conceptual row of the smtpServerIpTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| smtpServerIpSMTP mail server's IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.19.7.4.1.1 | ||||
| smtpServerIpStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.19.7.4.1.2 |
smtpDestEMailTable
table.1.3.6.1.4.1.259.10.1.51.1.19.7.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk smtpDestEMailTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::smtpDestEMailTable'
The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5.
A conceptual row of the smtpDestEMailTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| smtpDestEMailSMTP destination e-mail address. | OctetString Constraints: range: 0-41 | .1.3.6.1.4.1.259.10.1.51.1.19.7.5.1.1 | ||||
| smtpDestEMailStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.19.7.5.1.2 |
sntpServerTable
table.1.3.6.1.4.1.259.10.1.51.1.23.1.4
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk sntpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::sntpServerTable'
Table for SNTP servers. IP addresses must occupy contiguous indexes, starting from 1. If a removed entry is not the last entry, the table will be shifted to contiguous indexes automatically.
Entry for SNTP servers.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sntpServerIndexThe index of a server. | Integer32 Constraints: range: 1-3 | .1.3.6.1.4.1.259.10.1.51.1.23.1.4.1.1 | ||||||||||||||
| sntpServerInetAddressTypeIndicates the type of address denoted in sntpServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. | INET-ADDRESS-MIBInetAddressTyper/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.23.1.4.1.4 | ||||||||||||||
| sntpServerInetAddressThe IP address of a time server. | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.23.1.4.1.5 | ||||||||||||||
| sntpServerStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.23.1.4.1.6 |
ntpAuthKeyTable
table.1.3.6.1.4.1.259.10.1.51.1.23.5.6
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ntpAuthKeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ntpAuthKeyTable'
Table for NTP Authentication keys
Entry for NTP Authentication keys.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ntpAuthKeyIdThe index of a Authentication key. This table has fixed size. | Integer32 Constraints: range: 1-65536 | .1.3.6.1.4.1.259.10.1.51.1.23.5.6.1.1 | ||||
| ntpAuthKeyWordThe Authentication key word is used to created a key by the MD5 And the max length is 32. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.23.5.6.1.2 | ||||
| ntpAuthKeyStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.23.5.6.1.3 |
ntpServerInetTable
table.1.3.6.1.4.1.259.10.1.51.1.23.5.8
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ntpServerInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ntpServerInetTable'
Table for NTP servers.
Entry for NTP servers.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ntpServerInetAddressTypeIndicates the type of address denoted in ntpServerInetAddress type. Only ipv4(1), ipv6(2), and dns(16) types are supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.23.5.8.1.1 | ||||||||||||||
| ntpServerInetAddressThe address of a time server. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.23.5.8.1.2 | ||||||||||||||
| ntpServerInetVersionNTP version. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.23.5.8.1.3 | ||||||||||||||
| ntpServerInetKeyIdKey for a NTP server. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.23.5.8.1.4 | ||||||||||||||
| ntpServerInetStatusStatus of the NTP server. Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.23.5.8.1.5 |
fileInfoTable
table.1.3.6.1.4.1.259.10.1.51.1.24.2.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk fileInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::fileInfoTable'
This table contain the information of the file system; we can also perform the delete, set startup file operation.
A conceptually row for fileInfoTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| fileInfoUnitIDThe switch unit in a stacking system, in a non-stacking system, this value is always 1. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.24.2.1.1.1 | ||||
| fileInfoFileNameThe file Name of the file System in the device. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.24.2.1.1.2 | ||||
| fileInfoFileTypeThe file type of the file System in the device. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.24.2.1.1.3 | ||||
| fileInfoIsStartUpThis flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation. | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.24.2.1.1.4 | ||||
| fileInfoFileSizeThe sizes( in bytes) of the file. | bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.24.2.1.1.5 | ||||
| fileInfoCreationTimeThe creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-d… | OctetString Constraints: range: 20-20 | .1.3.6.1.4.1.259.10.1.51.1.24.2.1.1.6 | ||||
| fileInfoDeleteWrite this object to delete(2) to delete a file, when read, this always return noDelete(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.24.2.1.1.7 |
.1.3.6.1.4.1.259.10.1.51.1.24.3
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk fileAutoDownloadResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::fileAutoDownloadResultTable'
This table contains file auto download result information.
A conceptual row for fileAutoDownloadResultTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| fileAutoDownloadResultUnitIDThe switch unit in a stacking system, in a non-stacking system, this value is always 1. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.259.10.1.51.1.24.3.1.1 |
| fileAutoDownloadResultActionThe status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be obtained if no auto download action is currently processing. … | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.24.3.1.2 |
| fileAutoDownloadResultStatusThe last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. The listed values are identical to fileCopyStatus. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.24.3.1.3 |
dnsCacheTable
table.1.3.6.1.4.1.259.10.1.51.1.26.7
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dnsCacheTable'
To display the RRs in DNS cache.
A conceptual row for the dnsCacheTable.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dnsCacheIndexThe entry sequence number. | Integer32 Constraints: range: 1280-6400 | .1.3.6.1.4.1.259.10.1.51.1.26.7.1.1 | ||||||||||||||
| dnsCacheFlagAlways get 4, means this record is unreliable. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.26.7.1.2 | ||||||||||||||
| dnsCacheTypeCache Type: address(1); cname(2). | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.26.7.1.3 | ||||||||||||||
| dnsCacheTtlThe DNS cache TTL. | Integer32 Constraints: range: 0-876000 | .1.3.6.1.4.1.259.10.1.51.1.26.7.1.5 | ||||||||||||||
| dnsCacheDomainThe DNS cache domain. | OctetString Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.26.7.1.6 | ||||||||||||||
| dnsCacheInetAddressTypeIndicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1) and ipv6(2) types are supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.26.7.1.7 | ||||||||||||||
| dnsCacheInetAddressIP address of DNS cache item. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.26.7.1.8 |
dnsHostTable
table.1.3.6.1.4.1.259.10.1.51.1.26.8
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dnsHostTable'
The conceptual table of dnsHostEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping.
A conceptual row for the dnsHostTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dnsHostIndexThe entry sequence number. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.259.10.1.51.1.26.8.1.1 | ||||
| dnsHostNameHost name. | OctetStringr/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.26.8.1.2 | ||||
| dnsHostStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.26.8.1.3 |
dnsHostAddrTable
table.1.3.6.1.4.1.259.10.1.51.1.26.9
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsHostAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dnsHostAddrTable'
The conceptual table of dnsHostAddrEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping.
A conceptual row for the dnsHostAddrTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dnsHostAddrInetAddressTypeIndicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) type are supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.26.9.1.1 | ||||||||||||||
| dnsHostAddrInetAddressSpecifies the address of the host. Adding one address to two different hosts is not allowed. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.26.9.1.2 | ||||||||||||||
| dnsHostAddrStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.26.9.1.3 |
dnsDomainListTable
table.1.3.6.1.4.1.259.10.1.51.1.26.10
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsDomainListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dnsDomainListTable'
This table defines a list of default domain names to complete unqualified host names.
A conceptual row for the dnsDomainListTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dnsDomainListIndexThe entry sequence number. | Integer32 Constraints: range: 1-3 | .1.3.6.1.4.1.259.10.1.51.1.26.10.1.1 | ||||
| dnsDomainListNameDomain name. | OctetStringr/w Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.26.10.1.2 | ||||
| dnsDomainListStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.26.10.1.3 |
dnsNameServerInetTable
table.1.3.6.1.4.1.259.10.1.51.1.26.11
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dnsNameServerInetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dnsNameServerInetTable'
Specifies the address of one or more name servers to use for name and address resolution.
A conceptual row for dnsNameServerInetTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dnsNameServerInetAddressTypeType of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.26.11.1.1 | ||||||||||||||
| dnsNameServerInetAddressIP address of name server. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.26.11.1.2 | ||||||||||||||
| dnsNameServerInetStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.26.11.1.3 |
pethPseMainExtTable
table.1.3.6.1.4.1.259.10.1.51.1.28.5
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk pethPseMainExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::pethPseMainExtTable'
A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
A set of objects that display and control the Main power of a PSE.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| pethPseMainExtDllPowerTypeIndicates whether the local system is a PSE or a PD and whether it is Type 1 or Type 2. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.28.5.1.1 |
| pethPseMainExtDllPowerSourceThe power sources of the local system. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.28.5.1.2 |
pethPsePortExtTable
table.1.3.6.1.4.1.259.10.1.51.1.28.6
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk pethPsePortExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::pethPsePortExtTable'
A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-write objects in this table are persistent at restart/reboot.
A set of objects that display and control the power characteristics of
a power Ethernet PSE port.
a power Ethernet PSE port.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| pethPsePortExtMirroredDllPdRequestedPowerValueReturns the PD requested power value received from the remote system. The definition and encoding of PD requested power value is the same as described in pethPdPortDllPdRequestedPowerValue. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.28.6.1.4 |
| pethPsePortExtDllPseAllocatedPowerValueReturns the PSE allocated power value that the local system has currently allocated to the remote system. The PSE allocated power value is the maximum input average power that the PSE wants the PD to ever draw under thi… | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.28.6.1.6 |
| pethPsePortTimeRangeThe name of the time range entry bound to the port. This object should be equal to one of the timeRangeName objects in timeRangeTable. The object works when pethPsePortAdminEnable is enabled(1). | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.259.10.1.51.1.28.6.1.11 |
| pethPsePortTimeRangeStatusIf no time range entry is bound to the port, value of this object is none(0). If PoE time range of the port is active, value of this object is active(1). If PoE time range of the port is inactive, value of this object i… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.28.6.1.12 |
| pethPsePortExtMaximumPowerValueReturns the user-configurable maximum power value that the local system has currently allocated to the remote system. The units of this variable is milliwatts. | milliwattsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.28.6.1.13 |
| pethPsePortExtUsedPowerValueReturns the currently used power value that the local system is delivering to the remote system. The units of this variable is milliwatts. | milliwattsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.28.6.1.14 |
mcastStormTable
table.1.3.6.1.4.1.259.10.1.51.1.33.1.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mcastStormTable'
Table to manage the control of multicast storms for ports.
The conceptual row of multiStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mcastStormIfIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.33.1.1.1.1 | ||||
| mcastStormStatusWhether multicast storm protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.1.1.1.2 | ||||
| mcastStormPktRateMulticast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 14881000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.1.1.1.4 |
bcastStormTable
table.1.3.6.1.4.1.259.10.1.51.1.33.3.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk bcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::bcastStormTable'
Table to manage the control of broadcast storms for ports.
The conceptual row of bcastStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| bcastStormIfIndexThe port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.33.3.1.1.1 | ||||
| bcastStormStatusWhether broadcast storm protection is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.3.1.1.2 | ||||
| bcastStormPktRateBroadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 14881000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.3.1.1.4 |
unknownUcastStormTable
table.1.3.6.1.4.1.259.10.1.51.1.33.4.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk unknownUcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::unknownUcastStormTable'
Table to manage the unknown unicast storm control.
The conceptual row of unknownUcastStormTable.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| unknownUcastStormIfIndexThe port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.33.4.1.1.1 | ||||
| unknownUcastStormStatusThe parameter indicates that the unknown unicast storm protection is enabled/disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.4.1.1.2 | ||||
| unknownUcastStormPktRateThe parameter indicates the packet rate(packet per second) of the storm protection. The range is 500 to 14881000. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.4.1.1.4 |
atcBcastStormTable
table.1.3.6.1.4.1.259.10.1.51.1.33.5.3
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk atcBcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::atcBcastStormTable'
The table contains the Auto Traffic Control configuration and the status for broadcast traffic.
The conceptual row of the table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| atcBcastStormIfIndexThe specified port on which the ATC is applied. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.1 | ||||
| atcBcastStormEnableThe parameter indicates whether the ATC of the broadcast traffic is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.2 | ||||
| atcBcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature of ATC is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.3 | ||||
| atcBcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.4 | ||||
| atcBcastStormCurrentTrafficRateThe parameter indicates the current broadcast traffic rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.5 | ||||
| atcBcastStormAlarmFireThresholdThe parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.6 | ||||
| atcBcastStormAlarmClearThresholdThe parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.7 | ||||
| atcBcastStormTcActionThe parameter indicates the protecting action which ATC will applied to the specified port. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.8 | ||||
| atcBcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has to be sent when the broadcast storm has been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.9 | ||||
| atcBcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.10 | ||||
| atcBcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is activated. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.11 | ||||
| atcBcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is released. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.3.1.12 |
atcMcastStormTable
table.1.3.6.1.4.1.259.10.1.51.1.33.5.6
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk atcMcastStormTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::atcMcastStormTable'
The table contains the Auto Traffic Control configuration and the status for mulicast traffic.
The conceptual row of the table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| atcMcastStormIfIndexThe specified port on which the ATC is applied. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.1 | ||||
| atcMcastStormEnableThe parameter indicates whether the ATC of the mulicast traffic is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.2 | ||||
| atcMcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature of ATC is applied. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.3 | ||||
| atcMcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.4 | ||||
| atcMcastStormCurrentTrafficRateThe parameter indicates the current mulicast traffic rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.5 | ||||
| atcMcastStormAlarmFireThresholdThe parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.6 | ||||
| atcMcastStormAlarmClearThresholdThe parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.7 | ||||
| atcMcastStormTcActionThe parameter indicates the protecting action which ATC will applied to the specified port. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.8 | ||||
| atcMcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has to be sent when the mulicast storm has been detected. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.9 | ||||
| atcMcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.10 | ||||
| atcMcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is activated. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.11 | ||||
| atcMcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when the ATC is released. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.33.5.6.1.12 |
taskCpuTable
table.1.3.6.1.4.1.259.10.1.51.1.39.4
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk taskCpuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::taskCpuTable'
Table of descriptive and status information describing the CPU utilization of each task.
An entry in the table, describing the CPU utilization of one
task.
task.
Indexes
| Column | Syntax | OID |
|---|---|---|
| taskCpuNameThe name of the task. | OctetString Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.39.4.1.1 |
| taskCpuCurrentUtiThe current CPU utilization in hundredths of a percent in the past 5 seconds. | Integer32 Constraints: range: 1-10000 | .1.3.6.1.4.1.259.10.1.51.1.39.4.1.2 |
| taskCpuStatMaxUtiThe maximum CPU utilization in hundredths of a percent in the past 60 seconds. | Integer32 Constraints: range: 1-10000 | .1.3.6.1.4.1.259.10.1.51.1.39.4.1.3 |
| taskCpuStatAvgUtiThe average CPU utilization in hundredths of a percent in the past 60 seconds. | Integer32 Constraints: range: 1-10000 | .1.3.6.1.4.1.259.10.1.51.1.39.4.1.4 |
mvrDomainTable
table.1.3.6.1.4.1.259.10.1.51.1.44.20
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrDomainTable'
The table for configuring the MVR port.
The entry for configuring the MVR Domain.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrDomainIdSpeicfies which MVR domain to configure. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.44.20.1.1 | ||||
| mvrDomainStatusParameter to enable or disable MVR(Multicast VLAN Registration) on the device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.44.20.1.2 | ||||
| mvrDomainRunningStatusDescribes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR environment are satisfied. A value of inactive(2) indicates that s… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.44.20.1.3 | ||||
| mvrDomainVlanIdTo set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | Q-BRIDGE-MIBVlanIndexr/w | .1.3.6.1.4.1.259.10.1.51.1.44.20.1.4 | ||||
| mvrDomainUpstreamSourceIpSet the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.44.20.1.5 | ||||
| mvrDomainClearDynamicGroupsClear dynamic learned groups | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.44.20.1.6 |
mvrDomainPortTable
table.1.3.6.1.4.1.259.10.1.51.1.44.21
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrDomainPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrDomainPortTable'
The table for configuring the MVR port.
The entry for configuring the MVR port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrPortDomainIdSpeicfies which MVR domain to configure. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.44.21.1.1 | ||||
| mvrDomainIfIndexThe port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.44.21.1.2 | ||||
| mvrDomainPortTypeFor configuring the MVR port type. To disable the MVR port type, use the none(0). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.44.21.1.3 | ||||
| mvrDomainPortImmediateLeaveTo enable immediate leave on MVR port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.44.21.1.4 | ||||
| mvrDomainPortActiveTo indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2). | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.44.21.1.5 | ||||
| mvrDomainPortImmediateLeaveByHostIpTo enable immediate leave by host IP on MVR port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.44.21.1.6 |
mvrProfileCtlTable
table.1.3.6.1.4.1.259.10.1.51.1.44.22.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrProfileCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrProfileCtlTable'
The entry for configuring the MVR profile.
The entry for configuring the MVR profile.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvrProfileCtlIdProfile ID to index which MVR profile | Integer32 Constraints: range: 0-31 | .1.3.6.1.4.1.259.10.1.51.1.44.22.1.1.1 |
| mvrProfileNameMVR Profile name which identify a group range. NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvrProfileCtlAction really creat the profile. | OctetStringr/w | .1.3.6.1.4.1.259.10.1.51.1.44.22.1.1.2 |
| mvrProfileCtlActionSet this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.44.22.1.1.5 |
mvrProfileGroupCtlTable
table.1.3.6.1.4.1.259.10.1.51.1.44.22.2
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrProfileGroupCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrProfileGroupCtlTable'
The entry for configuring the MVR group ranges for MVR profile.
The entry for configuring the group ranges on MVR profile.
| Column | Syntax | OID |
|---|---|---|
| mvrProfileGropuCtlProfileIdProfile ID to index which MVR profile | Integer32 Constraints: range: 0-31 | .1.3.6.1.4.1.259.10.1.51.1.44.22.2.1.1 |
| mvrProfileGroupCtlIdProfile ID to index which group range in MVR profile | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.44.22.2.1.2 |
| mvrProfileGroupStartIPAddressMVR Profile range start IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before mvrProfileGroupCtlAction really creat the group rang on profil… | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.44.22.2.1.3 |
| mvrProfileGroupEndIPAddressMVR Profile range end IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before mvrProfileGroupCtlAction really creat the group rang on profile. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.44.22.2.1.4 |
| mvrProfileGroupCtlActionSet this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAction(1). NOTE: If mvrProfileGroupStartIPAddres… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.44.22.2.1.5 |
.1.3.6.1.4.1.259.10.1.51.1.44.23
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrDomainAssociatedProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrDomainAssociatedProfileTable'
Configure MVR domain associate which MVR profile
The entry for configuring MVR domain associate MVR profile.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvrProfileDomainIdProfile ID to index which MVR profile | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.44.23.1.1 |
| mvrProfileIdProfile ID to index which MVR profile | Integer32 Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.44.23.1.2 |
| mvrProfileActionSet this object to create(1) to associate profile. Set this object to destory(2) to deassociate profile. When the action is complete, this object becomes noAction(0). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.44.23.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.44.24
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrDomainGroupStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrDomainGroupStaticTable'
The table for configuring the static members of the MVR group.
The entry for configuring the static members of the
MVR group.
MVR group.
| Column | Syntax | OID |
|---|---|---|
| mvrGroupStaticDomainIdProfile ID to index which MVR profile | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.44.24.1.1 |
| mvrDomainGroupStaticAddressThe multicast address of the MVR group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.44.24.1.2 |
| mvrDomainGroupStaticReceiverVlanThe receiver vlan of this MVR group | Integer32 Constraints: range: 1-4093 | .1.3.6.1.4.1.259.10.1.51.1.44.24.1.3 |
| mvrDomainGroupStaticPortsThe set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.44.24.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.44.25
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrDomainGroupCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrDomainGroupCurrentTable'
The table for the current members of the MVR group.
The entry for the current members of the MVR group.
| Column | Syntax | OID |
|---|---|---|
| mvrGroupCurrenDomainIdProfile ID to index which MVR profile | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.44.25.1.1 |
| mvrDomainGroupCurrentAddressThe multicast address of the MVR group. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.44.25.1.2 |
| mvrDomainGroupCurrentReceiverVlanThis object indicates the receiver VLAN of the MVR group. | Integer32 Constraints: range: 1-4093 | .1.3.6.1.4.1.259.10.1.51.1.44.25.1.3 |
| mvrDomainGroupCurrentPortsThe complete set of ports currently associated with this MVR group. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.44.25.1.4 |
mvrPortStatisticsTable
table.1.3.6.1.4.1.259.10.1.51.1.44.32
·
1 row entry
·
14 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrPortStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrPortStatisticsTable'
Table of service per port.
Entry of service per port.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrPortStatisticsDomainIdMVR domain ID. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.1 | ||||
| mvrPortStatisticsPortIndexThe port and the trunk (excluding trunk members) interface of the mvrPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.2 | ||||
| mvrPortStatisticsNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.3 | ||||
| mvrPortStatisticsNumJoinSendNumber of join send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.4 | ||||
| mvrPortStatisticsNumJoinsNumber of join recieved | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.5 | ||||
| mvrPortStatisticsNumJoinSuccessNumber of join group success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.6 | ||||
| mvrPortStatisticsNumLeavesSendNumber of leave send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.7 | ||||
| mvrPortStatisticsNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.8 | ||||
| mvrPortStatisticsNumGeneralQuerySendNumber of general query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.9 | ||||
| mvrPortStatisticsNumGeneralQueryReceviedNumber of general query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.10 | ||||
| mvrPortStatisticsNumSepcificQuerySendNumber of specific query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.11 | ||||
| mvrPortStatisticsNumSpecificQueryReceivedNumber of specific query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.12 | ||||
| mvrPortStatisticsNumInvalidReportNumber of invalid report received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.13 | ||||
| mvrPortStatisticsClearStatisticsClear this VLAN all statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.44.32.1.14 |
mvrVlanStatisticsTable
table.1.3.6.1.4.1.259.10.1.51.1.44.33
·
1 row entry
·
14 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvrVlanStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvrVlanStatisticsTable'
Table of Mvr statistics VLAN.
Entry of Mvr statistics VLAN.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvrVlanStatisticsDomainIdVLAN ID | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.1 | ||||
| mvrVlanStatisticsVlanIdVLAN ID | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.2 | ||||
| mvrVlanStatisticsNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.3 | ||||
| mvrVlanStatisticsNumJoinSendNumber of join send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.4 | ||||
| mvrVlanStatisticsNumJoinsNumber of join received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.5 | ||||
| mvrVlanStatisticsNumJoinSuccessNumber of jion success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.6 | ||||
| mvrVlanStatisticsNumLeavesSendNumber of leave send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.7 | ||||
| mvrVlanStatisticsNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.8 | ||||
| mvrVlanStatisticsNumGeneralQuerySendNumber of general query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.9 | ||||
| mvrVlanStatisticsNumGeneralQueryReceviedNumber of general query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.10 | ||||
| mvrVlanStatisticsNumSepcificQuerySendNumber of specific query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.11 | ||||
| mvrVlanStatisticsNumSpecificQueryReceivedNumber of sepcific query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.12 | ||||
| mvrVlanStatisticsNumInvalidReportNumber of invalid report received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.13 | ||||
| mvrVlanStatisticsClearStatisticsClear this VLAN statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.44.33.1.14 |
dhcpSnoopVlanConfigTable
table.1.3.6.1.4.1.259.10.1.51.1.46.2.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpSnoopVlanConfigTable'
A table contains DHCP Snooping configurations of existing VLANs.
An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.
or disable DHCP Snooping at each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpSnoopVlanIndexThis object indicates the VLAN ID on which DHCP Snooping feature is configured. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.46.2.1.1.1 | ||||
| dhcpSnoopVlanEnableThis object indicates whether DHCP Snooping is enabled in this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.46.2.1.1.2 |
dhcpSnoopPortConfigTable
table.1.3.6.1.4.1.259.10.1.51.1.46.3.1
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpSnoopPortConfigTable'
A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose.
An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose.
trust state of each port or trunk for DHCP Snooping purpose.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpSnoopPortIfIndexThe ifIndex value of the port or trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.46.3.1.1.1 | ||||
| dhcpSnoopPortTrustEnableThis object indicates whether the port or trunk is trusted for DHCP Snooping purpose. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.46.3.1.1.2 | ||||
| dhcpSnoopPortInformationOptionCIDThis object indicates the different option that is inserted to relay agent information circuit ID sub-option. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.46.3.1.1.3 | ||||
| dhcpSnoopPortInformationOptionCIDStringInserts string in circuit ID sub-option. | OctetStringr/w | .1.3.6.1.4.1.259.10.1.51.1.46.3.1.1.4 | ||||
| dhcpSnoopPortInformationOptionCIDTr101VlanFieldThis object indicates whether the circuit ID TR101 vlan field is enabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.46.3.1.1.5 | ||||
| dhcpSnoopPortMaxNumberThis object indicates the max client number of per port. | Integer32r/w Constraints: range: 1-1024 | .1.3.6.1.4.1.259.10.1.51.1.46.3.1.1.6 |
dhcpSnoopBindingsTable
table.1.3.6.1.4.1.259.10.1.51.1.46.4.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpSnoopBindingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpSnoopBindingsTable'
A table contains the DHCP bindings information learnt by the device.
An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.
IP address, VLAN number, interface number, leased time and
status.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| dhcpSnoopBindingsVlanIndexThis object indicates the VLAN which a DHCP client host belongs to. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.46.4.1.1.1 | ||||||||||||||
| dhcpSnoopBindingsMacAddressThis object indicates the MAC address of a DHCP client host. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.46.4.1.1.2 | ||||||||||||||
| dhcpSnoopBindingsAddrTypeThis object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.46.4.1.1.3 | ||||||||||||||
| dhcpSnoopBindingsEntryTypeThis object indicates that this binding is obtained from dynamically learning or is a static configuraion. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.46.4.1.1.4 | ||||||||||||||
| dhcpSnoopBindingsIpAddressThis object indicates the allocated IP address of a DHCP client host. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.46.4.1.1.5 | ||||||||||||||
| dhcpSnoopBindingsPortIfIndexThis object indicates the port or trunk where a DHCP client host connects to. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.46.4.1.1.6 | ||||||||||||||
| dhcpSnoopBindingsLeaseTimeThis object indicates the leased time of this DHCP bindings. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.46.4.1.1.7 |
ipSrcGuardConfigTable
table.1.3.6.1.4.1.259.10.1.51.1.48.1
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipSrcGuardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ipSrcGuardConfigTable'
A table contains the configurations to enable or disable IP Source Guard at each port or trunk.
An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk.
or disable IP Source Guard at each port or trunk.
Indexes
| Column | Syntax | OID |
|---|---|---|
| ipSrcGuardPortIfIndexThis object idents the port or trunk which is capable of IP Source Guard feature. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.48.1.1.1 |
| ipSrcGuardModeThis object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1, it means Ip Source Guard is enabled, and packets are filte… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.48.1.1.2 |
| ipSrcGuardTableModeThis object indicates the table mode IP Source Guard select. If the value equals 1, it means IP Source Guard choose ACL mode to filter packet. If the value equals 2, it means IP Source Guard choose MAC mode to filter pa… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.48.1.1.3 |
| ipSrcGuardAclMaxBindingThis object indicates the maximum binding number in ACL mode. The number of IP Source Guard bindings in ACL mode will be limited by this value. | Integer32r/w Constraints: range: 1-10 | .1.3.6.1.4.1.259.10.1.51.1.48.1.1.4 |
| ipSrcGuardMacMaxBindingThis object indicates the maximum binding numer in MAC mode. The number of IP Source Guard bindings in MAC mode will be limited by this value. | Integer32r/w Constraints: range: 1-1024 | .1.3.6.1.4.1.259.10.1.51.1.48.1.1.5 |
ipSrcGuardAclTable
table.1.3.6.1.4.1.259.10.1.51.1.48.3
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipSrcGuardAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ipSrcGuardAclTable'
A table contains the IP Source Guard ACL binding information learned by the device or configured by the user.
An instance contains the IP address, Mac address, entry type,
VLAN number, interface number and status.
VLAN number, interface number and status.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ipSrcGuardAclBindingIpAddressThis object indicates the IP address of a ACL binding entry. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.48.3.1.1 | ||||||||||||
| ipSrcGuardAclBindingMacAddressThis object indicates the MAC address of a ACL binding entry. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.48.3.1.2 | ||||||||||||
| ipSrcGuardAclBindingEntryTypeThis object indicates that this binding is obtained from dynamically learning or is a static configuraion. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.48.3.1.3 | ||||||||||||
| ipSrcGuardAclBindingVlanIndexThis object indicates the VLAN which a ACL binding belongs to. | Q-BRIDGE-MIBVlanIndexr/w | .1.3.6.1.4.1.259.10.1.51.1.48.3.1.4 | ||||||||||||
| ipSrcGuardAclBindingPortIfIndexThis object indicates the port or trunk where a ACL binding associated. | IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.48.3.1.5 | ||||||||||||
| ipSrcGuardAclBindingStatusThe status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is avail… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.48.3.1.6 |
ipSrcGuardMacTable
table.1.3.6.1.4.1.259.10.1.51.1.48.4
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipSrcGuardMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ipSrcGuardMacTable'
A table contains the IP Source Guard MAC binding information learned by the device or configured by the user.
An instance contains the IP address, Mac address,
VLAN number, interface number and status.
VLAN number, interface number and status.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ipSrcGuardMacBindingMacAddressThis object indicates the MAC address of a MAC binding entry. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.48.4.1.1 | ||||||||||||
| ipSrcGuardMacBindingIpAddressThis object indicates the IP address of a MAC binding entry. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.48.4.1.2 | ||||||||||||
| ipSrcGuardMacBindingStartVlanThis object indicates the start VLAN which a MAC binding belongs to. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.48.4.1.3 | ||||||||||||
| ipSrcGuardMacBindingEndVlanThis object indicates the end VLAN which a MAC binding belongs to. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.48.4.1.4 | ||||||||||||
| ipSrcGuardMacBindingPortListThis object indicates the port or trunk where a MAC binding associated. | OctetStringr/w Constraints: range: 0-128 | .1.3.6.1.4.1.259.10.1.51.1.48.4.1.5 | ||||||||||||
| ipSrcGuardMacBindingStatusThe status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is avail… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.48.4.1.6 |
oamPortClearStatTable
table.1.3.6.1.4.1.259.10.1.51.1.52.3
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk oamPortClearStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::oamPortClearStatTable'
A table contains the information of clear OAM statistics at each port.
An entry contains the information of clear OAM statistics
at each port.
at each port.
Indexes
| Column | Syntax | OID |
|---|---|---|
| oamPortClearStatIndexThis object shows the ifIndex value of the port excluding trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.52.3.1.1 |
| oamClearStatisticsThis variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when reading this variable. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.52.3.1.2 |
oamLoopbackTable
table.1.3.6.1.4.1.259.10.1.51.1.52.4
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk oamLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::oamLoopbackTable'
Table for OAM remote loopback test.
Entry for OAM remote loopback test.
Indexes
| Column | Syntax | OID |
|---|---|---|
| oamLoopbackTestIfIndexThe ifIndex value of the port (excluding trunk and trunk members). The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.52.4.1.1 |
| oamLoopbackTestPacketNumberSetting the packet number when performing loopback test. | Integer32r/w Constraints: range: 1-99999999 | .1.3.6.1.4.1.259.10.1.51.1.52.4.1.2 |
| oamLoopbackTestPacketSizeSetting the packet size when performing loopback test. | Integer32r/w Constraints: range: 64-1518 | .1.3.6.1.4.1.259.10.1.51.1.52.4.1.3 |
| oamLoopbackTestActionSetting this object to test(2) to begin the loopback test. This object will be noTest(1) when the loopback test is canceled or the loopback test has finished. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.52.4.1.4 |
| oamLoopbackTestResultTxA count of the the total number of loopback frames transmitted at last loopback test on this interface. | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.52.4.1.5 |
| oamLoopbackTestResultRxA count of the the total number of loopback frames received at last loopback test on this interface. | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.52.4.1.6 |
| oamLoopbackTestResultLossRatePacket loss rate of this loopback test operation in hundredths of a percent. This variable is calculated by oamLoopbackTestResultRx and oamLoopbackTestResultTx. | Integer32 Constraints: range: 0-10000 | .1.3.6.1.4.1.259.10.1.51.1.52.4.1.7 |
.1.3.6.1.4.1.259.10.1.51.1.52.6
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk oamPortClearEventLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::oamPortClearEventLogTable'
A table containing the information of clear OAM event log at each port.
An entry containing the information of clear OAM event log
at each port.
at each port.
Indexes
| Column | Syntax | OID |
|---|---|---|
| oamPortClearEventLogIndexThe ifIndex value of the port (excluding trunk and trunk members). The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.52.6.1.1 |
| oamPortClearEventLogActionThis variable is used to clear the event log for OAM. Set this variable to clear(2) to perform the clear operation. noClear(1) will always be displayed when reading this variable. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.52.6.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.54.9
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopRouterCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopRouterCurrentTable'
Table for current router ports.
Entry for current router ports.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mldSnoopRouterCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRout… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.9.1.1 |
| mldSnoopRouterCurrentPortsThe set of ports which are current router ports, including static router ports. Please refer to mldSnoopRouterStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.54.9.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.54.10
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopRouterStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopRouterStaticTable'
Table for static router ports.
Entry for static router ports.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mldSnoopRouterStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRout… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.10.1.1 |
| mldSnoopRouterStaticPortsThe set of ports which are static router ports. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.54.10.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.54.11
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopMulticastCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopMulticastCurrentTable'
Table for current multicast addresses.
Entry for current multicast addresses.
| Column | Syntax | OID |
|---|---|---|
| mldSnoopMulticastCurrentVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMult… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.11.1.1 |
| mldSnoopMulticastCurrentIpAddressIPv6 address of multicast group. | INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16 | .1.3.6.1.4.1.259.10.1.51.1.54.11.1.2 |
| mldSnoopMulticastCurrentSourceIpAddressIPv6 address of the source. | INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16 | .1.3.6.1.4.1.259.10.1.51.1.54.11.1.3 |
| mldSnoopMulticastCurrentPortsThe set of ports which are members of a multicast group, including static members. Please refer to mldSnoopMulticastStaticTable. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.54.11.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.54.12
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopMulticastStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopMulticastStaticTable'
Table for static multicast addresses.
Entry for static multicast addresses.
| Column | Syntax | OID |
|---|---|---|
| mldSnoopMulticastStaticVlanIndexThe interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMult… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.12.1.1 |
| mldSnoopMulticastStaticIpAddressIPv6 address of multicast group. | INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16 | .1.3.6.1.4.1.259.10.1.51.1.54.12.1.2 |
| mldSnoopMulticastStaticPortsThe set of ports which are members. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.54.12.1.3 |
mldSnoopCurrentVlanTable
table.1.3.6.1.4.1.259.10.1.51.1.54.13
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopCurrentVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopCurrentVlanTable'
Table for configuring MLD snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP requests received.
Entry for configuring MLD snooping.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mldSnoopCurrentVlanIndexSame is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.13.1.1 | ||||
| mldSnoopCurrentVlanImmediateLeaveThe parameter to enable or disable the Immediate-Leave feature on this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.54.13.1.2 | ||||
| mldSnoopCurrentVlanImmediateLeaveByHostIpThe parameter to enable or disable the Immediate-Leave by-host-ip feature on this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.54.13.1.3 |
mldSnoopPortTable
table.1.3.6.1.4.1.259.10.1.51.1.54.16
·
1 row entry
·
15 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopPortTable'
Table of MLD Snooping service per port.
Entry of MLD Snooping service per port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mldSnoopPortIndexThe port and the trunk (excluding trunk members) interface of the mldsnpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.1 | ||||
| mldSnoopQueryDropParameter to enable or disable dropping MLD Query packet. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.3 | ||||
| mldSnoopMulticastDataDropParameter to enable or disable dropping IPv6 multicast data | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.4 | ||||
| mldSnoopPortNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.5 | ||||
| mldSnoopPortNumJoinSendNumber of join send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.6 | ||||
| mldSnoopPortNumJoinsNumber of join recieved | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.7 | ||||
| mldSnoopPortNumJoinSuccessNumber of join group success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.8 | ||||
| mldSnoopPortNumLeavesSendNumber of leave send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.9 | ||||
| mldSnoopPortNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.10 | ||||
| mldSnoopPortNumGeneralQuerySendNumber of general query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.11 | ||||
| mldSnoopPortNumGeneralQueryReceviedNumber of general query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.12 | ||||
| mldSnoopPortNumSepcificQuerySendNumber of specific query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.13 | ||||
| mldsnoopPortNumSpecificQueryReceivedNumber of specific query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.14 | ||||
| mldSnoopPortNumInvalidReportNumber of invalid report received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.15 | ||||
| mldSnoopPortClearStatisticsClear this VLAN all statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.54.16.1.16 |
mldSnoopProfileTable
table.1.3.6.1.4.1.259.10.1.51.1.54.18
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopProfileTable'
The table for configuring the MLD snooping profile.
The entry for configuring the MLD snooping profile.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mldSnoopProfileIdThe ID of the MLD snooping profile. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.18.1.1 | ||||
| mldSnoopProfileActionThe access mode of the MLD snooping profile. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.54.18.1.2 | ||||
| mldSnoopProfileStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.54.18.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.54.20
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopProfileRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopProfileRangeTable'
The table for configuring the range of the MLD snooping profile.
The entry for configuring the range of the MLD snooping
profile.
profile.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mldSnoopProfileRangeProfileIdThis is defined as mldSnoopProfileId. | Unsigned32 Constraints: range: 1-4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.20.1.1 | ||||||||||||||
| mldSnoopProfileRangeInetAddressTypeThe address type is associated with this agent. Only ipv6(2) type is supported. | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.54.20.1.2 | ||||||||||||||
| mldSnoopProfileRangeStartInetAddressThe specified addresses in the start of the controlled IPv6 multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.54.20.1.3 | ||||||||||||||
| mldSnoopProfileRangeEndInetAddressThe specified addresses in the end of the controlled IPv6 multicast addresses. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.54.20.1.4 | ||||||||||||||
| mldSnoopProfileRangeActionThe access mode of the MLD snooping profile. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.54.20.1.5 |
mldSnoopFilterPortTable
table.1.3.6.1.4.1.259.10.1.51.1.54.21
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopFilterPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopFilterPortTable'
Table for port configuration in MLD filtering.
Entry for port configuration in MLD filtering.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mldSnoopFilterPortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.21.1.1 |
| mldSnoopFilterPortProfileIdThe mldSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the mldSnoopProfileId object. If there is no corresponding entry in the mldSnoopProfileTable,… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.54.21.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.54.22
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopThrottlePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopThrottlePortTable'
Table for port configuration in MLD throttling.
Entry for port configuration in MLD throttling.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mldSnoopThrottlePortIndexThe port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.22.1.1 | ||||
| mldSnoopThrottlePortRunningStatusDescribes the running status of the MLD throttling to the switch. A value of true(1) indicates the MLD throttling mechanism is active. A value of false(2) indicates the MLD throttling mechanism is inactive. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.54.22.1.2 | ||||
| mldSnoopThrottlePortActionThe action mode of the MLD throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an MLD report and the number of current joined multicast groups is equal to the … | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.54.22.1.3 | ||||
| mldSnoopThrottlePortMaxGroupsThe maximum number of MLD groups that the interface can join. | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.10.1.51.1.54.22.1.4 | ||||
| mldSnoopThrottlePortCurrentGroupsThe current number of MLD groups that the interface has joined. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.54.22.1.5 |
mldSnoopVlanTable
table.1.3.6.1.4.1.259.10.1.51.1.54.24
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mldSnoopVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mldSnoopVlanTable'
Table of MLD Snooping service per port.
Entry of MLD Snooping service per VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mldSnoopVlanIndexVLAN ID | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.1 | ||||
| mldSnoopVlanNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.2 | ||||
| mldSnoopVlanNumJoinSendNumber of join send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.3 | ||||
| mldSnoopVlanNumJoinsNumber of join received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.4 | ||||
| mldSnoopVlanNumJoinSuccessNumber of jion success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.5 | ||||
| mldSnoopVlanNumLeavesSendNumber of leave send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.6 | ||||
| mldSnoopVlanNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.7 | ||||
| mldSnoopVlanNumGeneralQuerySendNumber of general query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.8 | ||||
| mldSnoopVlanNumGeneralQueryReceviedNumber of general query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.9 | ||||
| mldSnoopVlanNumSepcificQuerySendNumber of specific query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.10 | ||||
| mldsnoopVlanNumSpecificQueryReceivedNumber of sepcific query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.11 | ||||
| mldSnoopVlanNumInvalidReportNumber of invalid report received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.12 | ||||
| mldSnoopVlanClearStatisticsClear this VLAN statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.54.24.1.13 |
daiVlanTable
table.1.3.6.1.4.1.259.10.1.51.1.56.2.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::daiVlanTable'
A table contains dynamic ARP inspection configurations for existing VLANs.
An instance containing the configuration of dynamic ARP
inspection for each existing VLAN.
inspection for each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| daiVlanIndexThis object indicates the VLAN ID on which dynamic ARP inspection is configured. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.56.2.1.1.1 | ||||
| daiVlanStatusThis object indicates whether dynamic ARP inspection is enabled in this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.56.2.1.1.2 | ||||
| daiVlanArpAclNameSpecifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). | OctetStringr/w Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.56.2.1.1.3 | ||||
| daiVlanArpAclStatusSet to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping binding table. When daiVlanArpAclName is configured, the default v… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.56.2.1.1.4 |
daiPortTable
table.1.3.6.1.4.1.259.10.1.51.1.56.3.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::daiPortTable'
A table containing dynamic ARP inspection configurations for port interfaces.
An instance containing the configuration of dynamic ARP
inspection at each port interface.
inspection at each port interface.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| daiPortIfIndexThe ifIndex value of the port. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.56.3.1.1.1 | ||||
| daiPortTrustStatusThis object indicates whether the port is trusted for dynamic ARP inspection. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.56.3.1.1.2 | ||||
| daiPortRateLimitThe value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. | Unsigned32r/w Constraints: range: 0-2048range: 4294967295-4294967295 | .1.3.6.1.4.1.259.10.1.51.1.56.3.1.1.3 |
daiLogTable
table.1.3.6.1.4.1.259.10.1.51.1.56.4.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk daiLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::daiLogTable'
A table containing dynamic ARP inspection log information.
An instance containing log information of dynamic ARP
inspection at each VLAN interface.
inspection at each VLAN interface.
Indexes
| Column | Syntax | OID |
|---|---|---|
| daiLogIndexThis object indicates the index of dynamic ARP inspection log information. | Integer32 Constraints: range: 1-256 | .1.3.6.1.4.1.259.10.1.51.1.56.4.1.1.1 |
| daiLogVlanThis object indicates the VLAN ID of dynamic ARP inspection log information. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.56.4.1.1.2 |
| daiLogPortThis object indicates the ifIndex of dynamic ARP inspection log information. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.56.4.1.1.3 |
| daiLogSrcIpAddressThe source IP address of dynamic ARP inspection log information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.56.4.1.1.4 |
| daiLogDestIpAddressThe destination IP address of dynamic ARP inspection log information. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.259.10.1.51.1.56.4.1.1.5 |
| daiLogSrcMacAddressThe source MAC address of dynamic ARP inspection log information. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.56.4.1.1.6 |
| daiLogDestMacAddressThe destination MAC address of dynamic ARP inspection log information. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.56.4.1.1.7 |
pppoeiaPortTable
table.1.3.6.1.4.1.259.10.1.51.1.60.2
·
1 row entry
·
13 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk pppoeiaPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::pppoeiaPortTable'
Table for port configuration in PPPoE Intermediate Agent.
Entry for port configuration in PPPoE Intermediate Agent.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| pppoeiaPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.1 | ||||
| pppoeiaPortStatusThis parameter is used to enable/disable PPPoE Intermediate Agent on interfaces. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.60.2.1.2 | ||||
| pppoeiaPortTrustStatusThis parameter is used to enable/disable trust mode of PPPoE Intermediate Agent on interfaces. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.60.2.1.3 | ||||
| pppoeiaPortVendorTagStripThis parameter is used to enable/disable stripping of vendor tag status of PPPoE Intermediate Agent on interfaces. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.60.2.1.4 | ||||
| pppoeiaPortCircuitIdSpecifies circuit ID of PPPoE Intermediate Agent on interfaces. Use empty to revert to default value. | OctetStringr/w Constraints: range: 0-10 | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.5 | ||||
| pppoeiaPortOperCircuitIdThe operational circuit ID of PPPoE Intermediate Agent on interfaces. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.6 | ||||
| pppoeiaPortRemoteIdSpecifies remote ID of PPPoE Intermediate Agent on interfaces. Use empty to revert to default value. | OctetStringr/w Constraints: range: 0-63 | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.7 | ||||
| pppoeiaPortOperRemoteIdThe operational remote ID of PPPoE Intermediate Agent on interfaces. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.8 | ||||
| pppoeiaPortRemoteIdDelimiterEnableThis parameter is used to enable/disable delimiter for remote ID of PPPoE Intermediate Agent on interfaces. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.60.2.1.9 | ||||
| pppoeiaPortRemoteIdDelimiterAsciiSpecifies the ASCII code of delimiter for remote ID of PPPoE Intermediate Agent on interfaces. Use 256 to revert to default value. | Integer32r/w Constraints: range: 0-256 | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.10 | ||||
| pppoeiaPortCircuitIdModeThis object indicates the different option that is inserted to relay agent information circuit ID sub-option. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.11 | ||||
| pppoeiaPortRemoteIdModeThis object indicates the different option that insert to relay agent information remote ID sub-option. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.60.2.1.12 | ||||
| pppoeiaPortOptionCarryToClientThis parameter is used to enable/disable carry option to client. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.60.2.1.13 |
pppoeiaPortStatsTable
table.1.3.6.1.4.1.259.10.1.51.1.60.3
·
1 row entry
·
11 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk pppoeiaPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::pppoeiaPortStatsTable'
Table for port statistics in PPPoE Intermediate Agent.
Entry for port statistics in PPPoE Intermediate Agent.
Indexes
| Column | Syntax | OID |
|---|---|---|
| pppoeiaPortStatsIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.1 |
| pppoeiaPortStatsRecvPktsIndicates the total number of received packets of the interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.2 |
| pppoeiaPortStatsRecvPadiPktsIndicates the total number of received PPPoE Active Discovery Initiation packets of the interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.3 |
| pppoeiaPortStatsRecvPadoPktsIndicates the total number of received PPPoE Active Discovery Offer packets of the interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.4 |
| pppoeiaPortStatsRecvPadrPktsIndicates the total number of received PPPoE Active Discovery Request packets of the interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.5 |
| pppoeiaPortStatsRecvPadsPktsIndicates the total number of received PPPoE Active Discovery Session-confirmation packets of the interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.6 |
| pppoeiaPortStatsRecvPadtPktsIndicates the total number of received PPPoE Active Discovery Terminate packets of the interface. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.7 |
| pppoeiaPortStatsDropUntrustRespPktsIndicates the total number of response packets dropped because they were untrusted. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.8 |
| pppoeiaPortStatsDropUntrustReqPktsIndicates the total number of request packets dropped because they were untrusted. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.9 |
| pppoeiaPortStatsDropMalformedPktsIndicates the total number of malformed packets dropped because they were untrusted. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.10 |
| pppoeiaPortStatsClearActionThis variable is used to clear the counters of specified interface. Set clear(1) to perform the clear operation. The value noClear(2) will always be displayed when reading. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.60.3.1.11 |
timeRangeTable
table.1.3.6.1.4.1.259.10.1.51.1.61.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk timeRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::timeRangeTable'
Table for time range.
Entry for time range.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| timeRangeIndexThe index of time range entry. | Integer32 Constraints: range: 0-49 | .1.3.6.1.4.1.259.10.1.51.1.61.1.1.1 | ||||
| timeRangeNameThe name of time range entry. | OctetStringr/w Constraints: range: 1-32 | .1.3.6.1.4.1.259.10.1.51.1.61.1.1.2 | ||||
| timeRangeStatusSetting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.61.1.1.3 |
timeRangePeriodicTable
table.1.3.6.1.4.1.259.10.1.51.1.61.2
·
1 row entry
·
8 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk timeRangePeriodicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::timeRangePeriodicTable'
Table for periodic time-range entries.
Entry for periodic time-range.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| timeRangePeriodicTimeRangeIndexThe index of time range. The object should exist in timeRangeIndex of timeRangeTable. | Integer32 Constraints: range: 0-6 | .1.3.6.1.4.1.259.10.1.51.1.61.2.1.1 | ||||
| timeRangePeriodicStartDaysOfTheWeekSpecifies the start days-of-the-week of the periodic time-range entry. 1. If the start days-of-the-week is set to Sunday, Monday... or Saturday then the end days-of-the-week shall be set to Sunday, Monday..., or Satu… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.61.2.1.2 | ||||
| timeRangePeriodicStartHoursSpecifies the start hours of the periodic time-range entry. | Integer32 Constraints: range: 0-23 | .1.3.6.1.4.1.259.10.1.51.1.61.2.1.3 | ||||
| timeRangePeriodicStartMinutesSpecifies the start minutess of the periodic time-range entry. | Integer32 Constraints: range: 0-59 | .1.3.6.1.4.1.259.10.1.51.1.61.2.1.4 | ||||
| timeRangePeriodicEndDaysOfTheWeekSpecifies the end days-of-the-week of the periodic time-range entry. 1. If the start days-of-the-week is set to Sunday, Monday... or Saturday then the end days-of-the-week shall be set to Sunday, Monday..., or Saturd… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.61.2.1.5 | ||||
| timeRangePeriodicEndHoursSpecifies the end hours of the periodic time-range entry. | Integer32 Constraints: range: 0-23 | .1.3.6.1.4.1.259.10.1.51.1.61.2.1.6 | ||||
| timeRangePeriodicEndMinutesSpecifies the end minutess of the periodic time-range entry. | Integer32 Constraints: range: 0-59 | .1.3.6.1.4.1.259.10.1.51.1.61.2.1.7 | ||||
| timeRangePeriodicStatusSetting this to valid(1) creates an periodic entry. Setting this to invalid(2) destroys an periodic entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.61.2.1.8 |
timeRangeAbsoluteTable
table.1.3.6.1.4.1.259.10.1.51.1.61.3
·
1 row entry
·
12 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk timeRangeAbsoluteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::timeRangeAbsoluteTable'
Table for absolute time-range entries.
Entry for absolute time-range.
Indexes
timeRangeAbsoluteTimeRangeIndex timeRangeAbsoluteStartYears timeRangeAbsoluteStartMonths timeRangeAbsoluteStartDays timeRangeAbsoluteStartHours timeRangeAbsoluteStartMinutes timeRangeAbsoluteEndYears timeRangeAbsoluteEndMonths timeRangeAbsoluteEndDays timeRangeAbsoluteEndHours timeRangeAbsoluteEndMinutes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| timeRangeAbsoluteTimeRangeIndexThe index of time range. The object should exist in timeRangeIndex of timeRangeTable. | Integer32 Constraints: range: 0-49 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.1 | ||||
| timeRangeAbsoluteStartYearsSpecifies the start years of the absolute time-range entry. 65535 means don't care. | Integer32 Constraints: range: 2013-2037range: 65535-65535 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.2 | ||||
| timeRangeAbsoluteStartMonthsSpecifies the start months of the absolute time-range entry. 255 means don't care. | Integer32 Constraints: range: 1-12range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.3 | ||||
| timeRangeAbsoluteStartDaysSpecifies the start days of the absolute time-range entry. 255 means don't care. | Integer32 Constraints: range: 1-31range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.4 | ||||
| timeRangeAbsoluteStartHoursSpecifies the start hours of the absolute time-range entry.\ 255 means don't care. | Integer32 Constraints: range: 0-23range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.5 | ||||
| timeRangeAbsoluteStartMinutesSpecifies the start minutes of the absolute time-range entry.\ 255 means don't care. | Integer32 Constraints: range: 0-59range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.6 | ||||
| timeRangeAbsoluteEndYearsSpecifies the end years of the absolute time-range entry. 65535 means don't care. | Integer32 Constraints: range: 2013-2037range: 65535-65535 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.7 | ||||
| timeRangeAbsoluteEndMonthsSpecifies the end months of the absolute time-range entry. 255 means don't care. | Integer32 Constraints: range: 1-12range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.8 | ||||
| timeRangeAbsoluteEndDaysSpecifies the end days of the absolute time-range entry. 255 means don't care. | Integer32 Constraints: range: 1-31range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.9 | ||||
| timeRangeAbsoluteEndHoursSpecifies the end hours of the absolute time-range entry.\ 255 means don't care. | Integer32 Constraints: range: 0-23range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.10 | ||||
| timeRangeAbsoluteEndMinutesSpecifies the end minutes of the absolute time-range entry.\ 255 means don't care. | Integer32 Constraints: range: 0-59range: 255-255 | .1.3.6.1.4.1.259.10.1.51.1.61.3.1.11 | ||||
| timeRangeAbsoluteStatusSetting this to valid(1) creates an absolute entry. Setting this to invalid(2) destroys an absolute entry. | ValidStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.61.3.1.12 |
erpsVlanGroupTable
table.1.3.6.1.4.1.259.10.1.51.1.62.7
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk erpsVlanGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::erpsVlanGroupTable'
Table for ERPS VLAN group configuration.
Entry for ERPS VLAN group configuration.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| erpsVlanGroupIndexAn index that uniquely identifies an entry in the erpsVlanGroupTable. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.62.7.1.1 | ||||||||||||
| erpsVlanGroupNameThe vlan group name that uniquely identifies an entry in the erpsVlanGroupTable. | OctetStringr/w Constraints: range: 0-12 | .1.3.6.1.4.1.259.10.1.51.1.62.7.1.2 | ||||||||||||
| erpsVlanGroupVlanListConfigures a set of VLANs. | OctetStringr/w Constraints: range: 0-512 | .1.3.6.1.4.1.259.10.1.51.1.62.7.1.3 | ||||||||||||
| erpsVlanGroupRowStatusThe row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.62.7.1.4 |
erpsRingTable
table.1.3.6.1.4.1.259.10.1.51.1.62.8
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk erpsRingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::erpsRingTable'
Table for ERPS ring configuration.
Entry for ERPS ring configuration.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| erpsRingIndexAn index that uniquely identifies an entry in the erpsRingTable. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.62.8.1.1 | ||||||||||||
| erpsRingNameThe ring name that uniquely identifies an entry in the erpsRingTable. | OctetStringr/w Constraints: range: 0-12 | .1.3.6.1.4.1.259.10.1.51.1.62.8.1.2 | ||||||||||||
| erpsRingWestPortEach node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the west port for the specified ring. The east port and west port can not be config… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.62.8.1.3 | ||||||||||||
| erpsRingEastPortEach node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the east port for the specified ring. The east port and west port can not be config… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.62.8.1.4 | ||||||||||||
| erpsRingExclusionVlanA bitmap of VLAN groups lists a set of unprotected VLAN group IDs. Inclusion-vlan command is mandatory for each ERP instance while exclusion-vlan command is optional for each physical ring. | OctetStringr/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.62.8.1.5 | ||||||||||||
| erpsRingRowStatusThe row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.62.8.1.6 |
erpsInstanceTable
table.1.3.6.1.4.1.259.10.1.51.1.62.9
·
1 row entry
·
30 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk erpsInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::erpsInstanceTable'
Table for ERPS instance configuration.
Entry for ERPS instance configuration.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| erpsInstanceIndexAn index that uniquely identifies an entry in the erpsInstanceTable. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.1 | ||||||||||||
| erpsInstanceNameConfigures a instance and specifies name for the instance. | OctetStringr/w Constraints: range: 0-12 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.2 | ||||||||||||
| erpsInstanceMegLevelConfigures the maintenance entity group (MEG) level which is used to provide a communication channel for instance automatic protection switching (R-APS) information. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.3 | ||||||||||||
| erpsInstanceControlVlanIDThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS instance. The control VLAN is used only to send and receive ERPS message. A control VLAN can not belong to more than one E… | Integer32r/w Constraints: range: 0-4094 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.4 | ||||||||||||
| erpsInstanceRplTypeSet to none(1) to make this node act as a normal node. Set to owner(2) to make this node act as an RPL owner. Set to neighbor(3) to make this node act as an RPL neighbor. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.5 | ||||||||||||
| erpsInstanceWtrTimerConfigures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermittent failures. The range is in 1 minute steps between 1 and 12… | Integer32r/w Constraints: range: 1-12 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.6 | ||||||||||||
| erpsInstanceGuardTimerConfigures the value of the guard timer which is used to prevent instance nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms. | Integer32r/w Constraints: range: 10-2000 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.7 | ||||||||||||
| erpsInstanceHoldoffTimerConfigures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer value is non-zero. The range is in 100 ms steps between 0 and… | Integer32r/w Constraints: range: 0-10000 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.8 | ||||||||||||
| erpsInstanceMajorRingIndexAn index that uniquely identifies an entry in the erpsInstanceTable. A value of 0 means this instance has no major ring. Notes: This objest can not be configured if erpsRingEastPort of associted physical ring of this in… | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.11 | ||||||||||||
| erpsInstancePropagateTCSet to enabled(1) to transmit topology change signal to the major ring. It will not take effect if erpsInstanceMajorRingIndex doesn't designated. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.12 | ||||||||||||
| erpsInstanceNonRevertiveFor each instances of a ring is configured independently; as a result of that, the recovery mechanism is invoked separately for each instance according to its own configuration of operation mode when the SF condition is… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.14 | ||||||||||||
| erpsInstanceRapsDefMacSet to enabled(1) to use R-APS default MAC. If this configuration enabled then R-APS default MAC 01-19-A7-00-00-01 shall be used as destination address for the R-APS PDUs. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.15 | ||||||||||||
| erpsInstanceRapsWithoutVcSet to enabled(1) To specify the ERP instance as a sbu ring without virtual channel. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.16 | ||||||||||||
| erpsInstanceVersionSet to v2(2) to enable ERPS v2 operation. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.17 | ||||||||||||
| erpsInstanceInclusionVlanA bitmap of VLAN groups lists a set of VLAN group IDs protected by this instance. Inclusion-vlan command is mandatory for each ERP instance while exclusion-vlan command is optional for each physical ring. In the case of… | OctetStringr/w Constraints: range: 0-8 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.18 | ||||||||||||
| erpsInstancePhysicalRingIndexAn index that uniquely identifies an entry in the erpsRingTable. Associates the ERP instance to a physical ring. | SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.19 | ||||||||||||
| erpsInstanceForcedSwitchSet to west(2) to perform the forced switch command on west ring port of specified Instance. Set to east(3) to perform the forced switch command on east ring port of specified Instance. The value none(1) will be display… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.20 | ||||||||||||
| erpsInstanceManualSwitchSet to west(2) to perform the manual switch command on west ring port of specified Instance. Set to east(3) to perform the manual switch command on east ring port of specified Instance. The value none(1) will be display… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.21 | ||||||||||||
| erpsInstanceClearSet to clear(1) to perform the clear command on specified Instance. The value noClear(2) will always be displayed when reading. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.22 | ||||||||||||
| erpsInstanceClearStatisticsActionThis variable is used to clear the counters of specified instance. Set to clear(1) to perform the clear operation. The value noClear(2) will always be displayed when reading. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.23 | ||||||||||||
| erpsInstanceRowStatusThe row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.24 | ||||||||||||
| erpsInstanceNodeStateThis value displays the node's current state. It displays one of the following states (1) init -- The node is in the init state. (The node state will stay in init state if any one of global, ring, or instance … | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.25 | ||||||||||||
| erpsInstanceWestRingPortStateThis value displays the west ring port's current state. It displays one of the following states (1) unknown -- The port's current state is unknown. (The port's current state will stay in unknown state if the nod… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.26 | ||||||||||||
| erpsInstanceEastRingPortStateThis value displays the east ring port's current state. It displays one of the following states (1) unknown -- The port's current state is unknown. (The port's current state will stay in unknown state if the nod… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.27 | ||||||||||||
| erpsInstanceWtrExpireDisplays the time remaining in seconds until the wait-to-restore timer countdown expires. A value of 0 means no countdown is running. | Integer32 Constraints: range: 0-720 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.28 | ||||||||||||
| erpsInstanceWtbExpireDisplays the time remaining in ms until the wait-to-block timer countdown expires. A value of 0 means no countdown is running. | Integer32 Constraints: range: 0-7000 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.29 | ||||||||||||
| erpsInstanceWestRingPortSfThis value displays the west ring port's current SF state. It displays one of the following states (1) none -- No SF is detected. (2) detected -- SF is detected. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.30 | ||||||||||||
| erpsInstanceEastRingPortSfThis value displays the east ring port's current SF state. It displays one of the following states (1) none -- No SF is detected. (2) detected -- SF is detected. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.31 | ||||||||||||
| erpsInstanceMultiRplOwnerWarnThis value displays the multiple PPL owner warning state. It displays one of the following states (1) none -- No multiple PPL owner warning is detected. (2) detected -- Multiple RPL owner warning is detected. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.32 | ||||||||||||
| erpsInstanceWtbTimerDisplays the value of the wait-to-block timer in ms which is used by the RPL owner node when recovering from an operator command (i.e. FS or MS). This object will not take effect for a non RPL owner node. | Integer32 Constraints: range: 5010-7000 | .1.3.6.1.4.1.259.10.1.51.1.62.9.1.33 |
erpsPortStatisticsTable
table.1.3.6.1.4.1.259.10.1.51.1.62.10
·
1 row entry
·
25 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk erpsPortStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::erpsPortStatisticsTable'
Table for ERPS port statistics.
Entry for ERPS port statistics.
| Column | Syntax | OID |
|---|---|---|
| erpsStatisticsInstanceIndexDisplay statistics of either all ERP instances. | Integer32 Constraints: range: 1-255 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.1 |
| erpsStatsPortIndexThis object indicates the port in an ERPS instance. The value west(1) means the west ring port. The value east(2) means the east ring port. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.2 |
| erpsStatisticsLocalSfCountIndicates the total number of local SF events that occurred on this ring port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.3 |
| erpsStatisticsLocalClrSfCountIndicates the total number of local Clear SF events that occurred on this ring port. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.4 |
| erpsStatisticsSentSfPktsIndicates the total number of R-APS SF messages sent via this ring port (not including the forwarded ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.5 |
| erpsStatisticsSentNrPktsIndicates the total number of R-APS NR messages sent via this ring port (not including the forwarded ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.6 |
| erpsStatisticsSentNrRbPktsIndicates the total number of R-APS NR-RB messages sent via this ring port (not including the forwarded ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.7 |
| erpsStatisticsSentFsPktsIndicates the total number of R-APS FS messages sent via this ring port (not including the forwarded ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.8 |
| erpsStatisticsSentMsPktsIndicates the total number of R-APS MS messages sent via this ring port (not including the forwarded ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.9 |
| erpsStatisticsSentEventPktsIndicates the total number of R-APS EVENT messages sent via this ring port (not including the forwarded ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.10 |
| erpsStatisticsSentHealthPktsIndicates the total number of non-standard health-check messages sent via this ring port (not including the forwarded ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.11 |
| erpsStatisticsRecvSfPktsIndicates the total number of R-APS SF messages received via this ring port (not including the ignored ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.12 |
| erpsStatisticsRecvNrPktsIndicates the total number of R-APS NR messages received via this ring port (not including the ignored ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.13 |
| erpsStatisticsRecvNrRbPktsIndicates the total number of R-APS NR-RB messages received via this ring port (not including the ignored ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.14 |
| erpsStatisticsRecvFsPktsIndicates the total number of R-APS FS messages received via this ring port (not including the ignored ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.15 |
| erpsStatisticsRecvMsPktsIndicates the total number of R-APS MS messages received via this ring port (not including the ignored ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.16 |
| erpsStatisticsRecvEventPktsIndicates the total number of R-APS EVENT messages received via this ring port (not including the ignored ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.17 |
| erpsStatisticsRecvHealthPktsIndicates the total number of non-standard health-check messages received via this ring port (not including the ignored ones). | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.18 |
| erpsStatisticsIgnoreSfPktsIndicates the total number of R-APS SF messages ignored by this ring port because they have been timed out or for other reasons. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.19 |
| erpsStatisticsIgnoreNrPktsIndicates the total number of R-APS NR messages ignored by this ring port because they have been timed out or for other reasons. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.20 |
| erpsStatisticsIgnoreNrRbPktsIndicates the total number of R-APS NR-RB messages ignored by this ring port because they have been timed out or for other reasons. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.21 |
| erpsStatisticsIgnoreFsPktsIndicates the total number of R-APS FS messages ignored by this ring port because they have been timed out or for other reasons. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.22 |
| erpsStatisticsIgnoreMsPktsIndicates the total number of R-APS MS messages ignored by this ring port because they have been timed out or for other reasons. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.23 |
| erpsStatisticsIgnoreEventPktsIndicates the total number of R-APS EVENT messages ignored by this ring port because they have been timed out or for other reasons. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.24 |
| erpsStatisticsIgnoreHealthPktsIndicates the total number of non-standard health-check messages ignored by this ring port because they have been timed out or for other reasons. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.62.10.1.25 |
lbdPortTable
table.1.3.6.1.4.1.259.10.1.51.1.63.2.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk lbdPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::lbdPortTable'
A table containing LBD configurations for all interfaces.
An instance containing the configuration of LBD at each
interface.
interface.
Indexes
| Column | Syntax | OID |
|---|---|---|
| lbdPortIfIndexThe ifIndex value of the port. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.63.2.1.1.1 |
| lbdPortAdminStateThe LBD administrative port status. | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.63.2.1.1.2 |
| lbdPortOperStateThe LBD operative port status. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.63.2.1.1.3 |
| lbdPortLoopedVlanThe list of VLANs on which loopback is detected. Only when oper state is looped and mode is VLAN-based, the value is nonzero. | OctetString Constraints: range: 0-512 | .1.3.6.1.4.1.259.10.1.51.1.63.2.1.1.4 |
mvr6DomainTable
table.1.3.6.1.4.1.259.10.1.51.1.66.1
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6DomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6DomainTable'
The table for configuring the MVR port.
The entry for configuring the MVR Domain.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvr6DomainIdSpeicfies which MVR domain to configure. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.66.1.1.1 | ||||
| mvr6DomainStatusParameter to enable or disable MVR(Multicast VLAN Registration) on the device. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.66.1.1.2 | ||||
| mvr6DomainRunningStatusDescribes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR environment are satisfied. A value of inactive(2) indicates that s… | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.66.1.1.3 | ||||
| mvr6DomainVlanIdTo set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. | Q-BRIDGE-MIBVlanIndexr/w | .1.3.6.1.4.1.259.10.1.51.1.66.1.1.4 | ||||
| mvr6DomainUpstreamSourceIpv6Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port. | INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16 | .1.3.6.1.4.1.259.10.1.51.1.66.1.1.5 | ||||
| mvr6DomainClearDynamicGroupsClear dynamic learned groups | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.66.1.1.6 |
mvr6DomainPortTable
table.1.3.6.1.4.1.259.10.1.51.1.66.2
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6DomainPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6DomainPortTable'
The table for configuring the MVR port.
The entry for configuring the MVR port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvr6PortDomainIdSpeicfies which MVR domain to configure. | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.66.2.1.1 | ||||
| mvr6DomainIfIndexThe port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.66.2.1.2 | ||||
| mvr6DomainPortTypeFor configuring the MVR port type. To disable the MVR port type, use the none(0). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.66.2.1.3 | ||||
| mvr6DomainPortImmediateLeaveTo enable immediate leave on MVR port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.66.2.1.4 | ||||
| mvr6DomainPortActiveTo indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); otherwise the status is inactive(2). | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.66.2.1.5 | ||||
| mvr6DomainPortImmediateLeaveByHostIpTo enable immediate leave by host IP on MVR port. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.66.2.1.6 |
.1.3.6.1.4.1.259.10.1.51.1.66.4
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6DomainAssociatedProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6DomainAssociatedProfileTable'
Configure MVR domain associate which MVR profile
The entry for configuring MVR domain associate MVR profile.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvr6ProfileDomainIdProfile ID to index which MVR profile | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.66.4.1.1 |
| mvr6ProfileIdProfile ID to index which MVR profile | Integer32 Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.66.4.1.2 |
| mvr6ProfileActionSet this object to create(1) to associate profile. Set this object to destory(2) to deassociate profile. When the action is complete, this object becomes noAction(0). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.66.4.1.3 |
.1.3.6.1.4.1.259.10.1.51.1.66.5
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6DomainGroupStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6DomainGroupStaticTable'
The table for configuring the static members of the MVR group.
The entry for configuring the static members of the
MVR group.
MVR group.
| Column | Syntax | OID |
|---|---|---|
| mvr6GroupStaticDomainIdProfile ID to index which MVR profile | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.66.5.1.1 |
| mvr6DomainGroupStaticAddressThe multicast address of the MVR group. | INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16 | .1.3.6.1.4.1.259.10.1.51.1.66.5.1.2 |
| mvr6DomainGroupStaticReceiverVlanThe receiver vlan of this MVR group | Integer32 Constraints: range: 1-4093 | .1.3.6.1.4.1.259.10.1.51.1.66.5.1.3 |
| mvr6DomainGroupStaticPortsThe set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. | Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.259.10.1.51.1.66.5.1.4 |
.1.3.6.1.4.1.259.10.1.51.1.66.6
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6DomainGroupCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6DomainGroupCurrentTable'
The table for the current members of the MVR group.
The entry for the current members of the MVR group.
| Column | Syntax | OID |
|---|---|---|
| mvr6GroupCurrenDomainIdProfile ID to index which MVR profile | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.66.6.1.1 |
| mvr6DomainGroupCurrentAddressThe multicast address of the MVR group. | OctetString Constraints: range: 1-47 | .1.3.6.1.4.1.259.10.1.51.1.66.6.1.2 |
| mvr6DomainGroupCurrentReceiverVlanThis object indicates the receiver VLAN of the MVR group. | Integer32 Constraints: range: 1-4093 | .1.3.6.1.4.1.259.10.1.51.1.66.6.1.3 |
| mvr6DomainGroupCurrentPortsThe complete set of ports currently associated with this MVR group. | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.259.10.1.51.1.66.6.1.4 |
mvr6ProfileCtlTable
table.1.3.6.1.4.1.259.10.1.51.1.66.22.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6ProfileCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6ProfileCtlTable'
The entry for configuring the MVR6 profile.
The entry for configuring the MVR6 profile.
Indexes
| Column | Syntax | OID |
|---|---|---|
| mvr6ProfileCtlIdProfile ID to index which MVR6 profile | Integer32 Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.66.22.1.1.1 |
| mvr6ProfileNameMVR6 Profile name which identify a group range. NOTE: All mvr6ProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvr6ProfileCtlAction really creat the profile. | OctetStringr/w | .1.3.6.1.4.1.259.10.1.51.1.66.22.1.1.2 |
| mvr6ProfileCtlActionSet this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1). | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.66.22.1.1.5 |
mvr6ProfileGroupCtlTable
table.1.3.6.1.4.1.259.10.1.51.1.66.22.2
·
1 row entry
·
5 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6ProfileGroupCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6ProfileGroupCtlTable'
The entry for configuring the MVR group ranges for MVR6 profile.
The entry for configuring the group ranges on MVR6 profile.
| Column | Syntax | OID |
|---|---|---|
| mvr6ProfileGropuCtlProfileIdProfile ID to index which MVR6 profile | Integer32 Constraints: range: 0-15 | .1.3.6.1.4.1.259.10.1.51.1.66.22.2.1.1 |
| mvr6ProfileGroupCtlIdProfile ID to index which group range in MVR6 profile | Integer32 Constraints: range: 0-3 | .1.3.6.1.4.1.259.10.1.51.1.66.22.2.1.2 |
| mvr6ProfileGroupStartIPAddressMVR Profile range start IP address. NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temply store the mvr6ProfileStartIPAddress before mvr6ProfileGroupCtlAction really creat the group rang on pro… | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.66.22.2.1.3 |
| mvr6ProfileGroupEndIPAddressMVR6 Profile range end IP address. NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temply store the mvr6ProfileEndIPAddress before mvr6ProfileGroupCtlAction really creat the group rang on profil… | INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.66.22.2.1.4 |
| mvr6ProfileGroupCtlActionSet this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAction(1). NOTE: If mvr6ProfileGroupStartIPAddre… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.66.22.2.1.5 |
mvr6PortStatisticsTable
table.1.3.6.1.4.1.259.10.1.51.1.66.26
·
1 row entry
·
14 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6PortStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6PortStatisticsTable'
Table of Mvr6 statistics VLAN.
Entry of Mvr6 statistics VLAN.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvr6PortStatisticsDomainIdThe port and the trunk (excluding trunk members) interface of the mvr6PortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MI… | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.1 | ||||
| mvr6PortStatisticsPortIndexThe port and the trunk (excluding trunk members) interface of the mvr6PortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MI… | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.2 | ||||
| mvr6PortStatisticsNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.3 | ||||
| mvr6PortStatisticsNumJoinSendNumber of join send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.4 | ||||
| mvr6PortStatisticsNumJoinsNumber of join recieved | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.5 | ||||
| mvr6PortStatisticsNumJoinSuccessNumber of join group success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.6 | ||||
| mvr6PortStatisticsNumLeavesSendNumber of leave send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.7 | ||||
| mvr6PortStatisticsNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.8 | ||||
| mvr6PortStatisticsNumGeneralQuerySendNumber of general query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.9 | ||||
| mvr6PortStatisticsNumGeneralQueryReceviedNumber of general query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.10 | ||||
| mvr6PortStatisticsNumSepcificQuerySendNumber of specific query send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.11 | ||||
| mvr6PortStatisticsNumSpecificQueryReceivedNumber of specific query received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.12 | ||||
| mvr6PortStatisticsNumInvalidReportNumber of invalid report received. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.13 | ||||
| mvr6PortStatisticsClearStatisticsClear this VLAN all statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.66.26.1.14 |
mvr6VlanStatisticsTable
table.1.3.6.1.4.1.259.10.1.51.1.66.27
·
1 row entry
·
14 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk mvr6VlanStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::mvr6VlanStatisticsTable'
Table of Mvr6 statistics VLAN.
Entry of Mvr6 statistics VLAN.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| mvr6VlanStatisticsDomainIddomain ID | Integer32 Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.1 | ||||
| mvr6VlanStatisticsVlanIdVLAN ID | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.2 | ||||
| mvr6VlanStatisticsNumGroupsCurrent learned groups | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.3 | ||||
| mvr6VlanStatisticsNumJoinSendNumber of join send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.4 | ||||
| mvr6VlanStatisticsNumJoinsNumber of join received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.5 | ||||
| mvr6VlanStatisticsNumJoinSuccessNumber of jion success | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.6 | ||||
| mvr6VlanStatisticsNumLeavesSendNumber of leave send. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.7 | ||||
| mvr6VlanStatisticsNumLeavesNumber of leave received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.8 | ||||
| mvr6VlanStatisticsNumGeneralQuerySendNumber of general query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.9 | ||||
| mvr6VlanStatisticsNumGeneralQueryReceviedNumber of general query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.10 | ||||
| mvr6VlanStatisticsNumSepcificQuerySendNumber of specific query send | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.11 | ||||
| mvr6VlanStatisticsNumSpecificQueryReceivedNumber of sepcific query received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.12 | ||||
| mvr6VlanStatisticsNumInvalidReportNumber of invalid report received | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.13 | ||||
| mvr6VlanStatisticsClearStatisticsClear this VLAN statistics | SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.259.10.1.51.1.66.27.1.14 |
ipv6RaGuardPortTable
table.1.3.6.1.4.1.259.10.1.51.1.67.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ipv6RaGuardPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ipv6RaGuardPortTable'
Table for IPv6 RA Guard port configuration.
Entry for IPv6 RA Guard port configuration.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| ipv6RaGuardPortIndexThe port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.67.1.1.1 | ||||
| ipv6RaGuardPortStatusA value of enabled (1) indicates that IPv6 RA Guard feature is enabled on interfaces. A value of disabled (2) indicates that the feature is disabled. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.67.1.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.71.2.1
·
1 row entry
·
2 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpv6SnoopVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpv6SnoopVlanConfigTable'
A table contains DHCPv6 Snooping configurations of existing VLANs.
An instance contains the configuration to enable
or disable DHCPv6 Snooping at each existing VLAN.
or disable DHCPv6 Snooping at each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpv6SnoopVlanIndexThis object indicates the VLAN ID on which DHCPv6 Snooping feature is configured. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.71.2.1.1.1 | ||||
| dhcpv6SnoopVlanEnableThis object indicates whether DHCPv6 Snooping is enabled in this VLAN. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.71.2.1.1.2 |
.1.3.6.1.4.1.259.10.1.51.1.71.3.1
·
1 row entry
·
4 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpv6SnoopPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpv6SnoopPortConfigTable'
A table provides the mechanism to configure the trust state of each port or trunk for DHCPv6 Snooping purpose.
An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCPv6 Snooping purpose.
trust state of each port or trunk for DHCPv6 Snooping purpose.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| dhcpv6SnoopPortIfIndexThe ifIndex value of the port or trunk. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.71.3.1.1.1 | ||||
| dhcpv6SnoopPortTrustEnableThis object indicates whether the port or trunk is trusted for DHCP Snooping purpose. | P-BRIDGE-MIBEnabledStatusr/w Type Values:
| .1.3.6.1.4.1.259.10.1.51.1.71.3.1.1.2 | ||||
| dhcpv6SnoopPortMaxBindingThe maximum number of binding entries of the port or trunk | Integer32r/w Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.71.3.1.1.3 | ||||
| dhcpv6SnoopPortCurrentBindingThe number of dynamic binding entrires learned on the port or trunk. | Integer32 Constraints: range: 0-5 | .1.3.6.1.4.1.259.10.1.51.1.71.3.1.1.4 |
dhcpv6SnoopBindingTable
table.1.3.6.1.4.1.259.10.1.51.1.71.4.1
·
1 row entry
·
7 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk dhcpv6SnoopBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::dhcpv6SnoopBindingTable'
A table contains the DHCPv6 binding entries information learned by the device.
An instance contains the link-layer address, ia type,
ia id, IPv6 address, VLAN number, interface number, lifetime.
ia id, IPv6 address, VLAN number, interface number, lifetime.
| Column | Syntax | OID |
|---|---|---|
| dhcpv6SnoopBindingLinkLayerAddressThis object indicates the link-layer address of a DHCPv6 client host. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.71.4.1.1.1 |
| dhcpv6SnoopBindingIaTypeThis object indicates the IPv6 address ia type of a DHCPv6 client host. na - Non-temporary address, ta - temporary address | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.71.4.1.1.2 |
| dhcpv6SnoopBindingIaIdThis object indicates the IPv6 address ia id of a DHCPv6 client host. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.71.4.1.1.3 |
| dhcpv6SnoopBindingIpv6AddressThis object indicates the IPv6 address of a DHCPv6 client host. | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.259.10.1.51.1.71.4.1.1.4 |
| dhcpv6SnoopBindingVlanIndexThis object indicates the VLAN which a DHCPv6 client host belongs to. | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.259.10.1.51.1.71.4.1.1.5 |
| dhcpv6SnoopBindingPortIfIndexThis object indicates the port or trunk where a DHCPv6 client host connects to. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.71.4.1.1.6 |
| dhcpv6SnoopBindingLifeTimeThis object indicates the life time of this DHCPv6 binding. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.259.10.1.51.1.71.4.1.1.7 |
ip6SrcGuardConfigTable
table.1.3.6.1.4.1.259.10.1.51.1.74.1
·
1 row entry
·
3 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ip6SrcGuardConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ip6SrcGuardConfigTable'
A table contains the configurations to set IPv6 Source Guard at each port.
An instance contains the configuration to set
IPv6 Source Guard at each port.
IPv6 Source Guard at each port.
Indexes
| Column | Syntax | OID |
|---|---|---|
| ip6SrcGuardPortIfIndexThis object idents the port which is capable of IPv6 Source Guard feature. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.74.1.1.1 |
| ip6SrcGuardModeThis object indicates whether IPv6 Source Guard is enabled at this interface. If the value equals 1, it means IPv6 Source Guard is disabled. If the value equals 2, it means IPv6 Source Guard is enabled, and packets are… | Enumerationr/w | .1.3.6.1.4.1.259.10.1.51.1.74.1.1.2 |
| ip6SrcGuardMaxBindingThis object indicates the maximum number of bindings associated with the port. | Integer32r/w Constraints: range: 1-5 | .1.3.6.1.4.1.259.10.1.51.1.74.1.1.3 |
ip6SrcGuardAddrTable
table.1.3.6.1.4.1.259.10.1.51.1.74.2
·
1 row entry
·
6 columns
Uses the edgecore variant from
Command help
/opt/observium/mibs/edgecore.
Walk ip6SrcGuardAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ECS5520-MIB' -M '/opt/observium/mibs/edgecore:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ECS5520-MIB::ip6SrcGuardAddrTable'
A table contains the IPv6 Source Guard bindings information learnt by the device or configured by the user.
An instance contains the Mac address, binding type,
IPv6 address, VLAN id, interface id, and status.
IPv6 address, VLAN id, interface id, and status.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ip6SrcGuardBindingTypeThis object indicates the binding type of the associated client. | Enumeration | .1.3.6.1.4.1.259.10.1.51.1.74.2.1.1 | ||||||||||||
| ip6SrcGuardBindingMacAddressThis object indicates the MAC address of the associated client. | SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… | .1.3.6.1.4.1.259.10.1.51.1.74.2.1.2 | ||||||||||||
| ip6SrcGuardBindingIpv6AddressThis object indicates the IPv6 address of the associated client. | INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16 | .1.3.6.1.4.1.259.10.1.51.1.74.2.1.3 | ||||||||||||
| ip6SrcGuardBindingVlanIndexThis object indicates the VLAN id of the associated client. | Q-BRIDGE-MIBVlanIndexr/w | .1.3.6.1.4.1.259.10.1.51.1.74.2.1.4 | ||||||||||||
| ip6SrcGuardBindingPortIfIndexThis object indicates the port of the associated client. | IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.259.10.1.51.1.74.2.1.5 | ||||||||||||
| ip6SrcGuardBindingStatusThe status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is avail… | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.259.10.1.51.1.74.2.1.6 |