EBN-MIB Table View

The EBN Directory Table.  This table is an extension
to the APPN MIB's appnDirTable.  Entries in this table
are in one-to-one correspondence with entries in the
appnDirTable, with corresponding entries having identical
values for their respective indexes.

ebnDirEntry row .1.3.6.1.2.1.34.7.1.1.1.1

Entry in the EBN Directory Table.

Indexes

ebnDirLuName

Column	Syntax	OID
ebnDirLuName Fully qualified network LU name in the domain of a serving network node. If this object has the same value as the appnDirLuName object in the APPN MIB, then the two objects are referring to the same LU.	SnaNAUWildcardName Type Constraints: range: 1..17	.1.3.6.1.2.1.34.7.1.1.1.1.1
ebnDirSubnetAffiliation Specifies the subnetwork affiliation of the LU: - native(1) : The LU is in the native APPN subnetwork. - nonNative(2) : The LU is in a non-native APPN subnetwork. - subarea(3) : The LU is in a subarea network.	Enumeration Enumerated Values: 1 native 2 nonNative 3 subarea	.1.3.6.1.2.1.34.7.1.1.1.1.2

The EBN Intermediate Session RSCV table.  This table is an
extension to the appnIsInTable.  It contains the RSCV and COS
used in the direction of the BIND destination.  There is an
entry in this table for each session that traverses an ISTG
when it enters or leaves this EBN, with corresponding entries
having identical values for their respective indexes.

ebnIsRscvEntry row .1.3.6.1.2.1.34.7.1.2.1.1

Entry in ebnIsRscvTable.

Indexes

ebnIsRscvCpName ebnIsRscvPcid

Column	Syntax	OID
ebnIsRscvCpName The network-qualified control point name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node at which the origin LU is located or the CP name of the NN …	APPN-MIBSnaControlPointName Type Constraints: range: 3..17	.1.3.6.1.2.1.34.7.1.2.1.1.1
ebnIsRscvPcid The procedure correlation identifier (PCID) of a session. It is an 8-octet value. If this object has the same value as the appnIsInPcid object in the APPN MIB, and if the corresponding ebnIsRscvCpName obj…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.7.1.2.1.1.2
ebnIsRscvDestinationRoute The route selection control vector (RSCV x'2B') used in the direction towards the SLU.	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.34.7.1.2.1.1.3
ebnIsRscvDestinationCos The Class of Service (COS) name used in the direction towards the SLU. Because the characters allowed in an SNA COS name come from a restricted character set, these names are not subject to internationali…	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.7.1.2.1.1.4

The EBN COS Mapping Table.  This table specifies how non-
native COS values are mapped to COS values defined in the
native subnetwork.
          
Note:  The COS mappings that an EBN performs are determined
by multiple factors, one of which is a set of user-defined
initial mappings.  This table returns the COS mappings that
the EBN is actually performing at the time it is queried,
rather than the user-defined initial ones.

ebnCosMapEntry row .1.3.6.1.2.1.34.7.1.4.1.1

An entry in the EBN COS Mapping table.

Indexes

ebnCosMapCpName ebnCosMapNonNativeCos

Column	Syntax	OID
ebnCosMapCpName Fully qualified network CP name for which the COS mapping applies.	SnaNAUWildcardName Type Constraints: range: 1..17	.1.3.6.1.2.1.34.7.1.4.1.1.1
ebnCosMapNonNativeCos This object contains one of the following values: - An 8-character COS name used in a non-native subnetwork. - The single character '*', identifying the entry with the default native COS for a non-nativ…	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.7.1.4.1.1.2
ebnCosMapNativeCos An 8-byte name for the class-of-service, as known in the native subnetwork. Because the characters allowed in an SNA COS name come from a restricted character set, these names are not subject to internati…	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.7.1.4.1.1.3

This table contains one entry for each fully qualified LU
name for which an associated subnet routing list has been
defined.  An entry in this table contains general
characteristics of the subnet search routing list for an
LU name.  The routing list itself is represented by a set
of contiguous entries in the ebnSearchTable.

ebnSubnetSearchEntry row .1.3.6.1.2.1.34.7.1.5.1.1

An entry for the ebnSubnetSearchTable. The entry
represents the configured parameters the EBN uses when it
is determining how to search for the LU identified by the
ebnSubnetSearchLuName object.

Indexes

ebnSubnetSearchLuName

Column	Syntax	OID
ebnSubnetSearchLuName Fully qualified network LU name.	SnaNAUWildcardName Type Constraints: range: 1..17	.1.3.6.1.2.1.34.7.1.5.1.1.1
ebnSubnetSearchDynamics Indicates whether an EBN may add dynamic entries to a subnetwork routing list. none(1) means no entries may be added to the subnetwork routing list. limited(2) means only likely entries may be added to the subnetwork …	Enumeration Enumerated Values: 1 none 2 limited 3 full	.1.3.6.1.2.1.34.7.1.5.1.1.2
ebnSubnetSearchOrdering Indicates whether an EBN may reorder a subnetwork routing list so that entries which are more likely to be successful move to the top of the subnetwork routing list and entries which are more likely to be unsuccessful m…	Enumeration Enumerated Values: 1 priority 2 defined	.1.3.6.1.2.1.34.7.1.5.1.1.3

This table indicates the CONFIGURED list of control points
to which the EBN sends Locate searches for a given fully
qualified LU name.  Each entry in the table indicates one
control point that should be included in a multi-subnet
search for a particular LU name.

ebnSearchEntry row .1.3.6.1.2.1.34.7.1.5.2.1

An entry in the ebnSearchTable. An entry can exist in
this table only if an entry exists in the
ebnSubnetSearchTable with an ebnSubnetSearchLuName value
matching this entry's ebnSearchLuName.

For a given e…

Indexes

ebnSearchLuName ebnSearchIndex

Column	Syntax	OID
ebnSearchLuName Fully qualified network LU name. If this object has the same value as the ebnSubnetSearchLuName object, then the two objects are referring to the same LU.	SnaNAUWildcardName Type Constraints: range: 1..17	.1.3.6.1.2.1.34.7.1.5.2.1.1
ebnSearchIndex Secondary index enumerating the CONFIGURED order in which a search is forwarded to CPs for a particular LU name. The order for an actual search is determined dynamically by the EBN, based on this configured information…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.7.1.5.2.1.2
ebnSearchCpName This object specifies the CP(s) to which a search should be forwarded. It either follows the SnaNAUWildcardName textual convention or takes one of the following special formats: '*' indicates that all…	OctetString Constraints: range: 1-17	.1.3.6.1.2.1.34.7.1.5.2.1.3
ebnSearchSNVC The maximum number of subnets a Locate search procedure may traverse.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.34.7.1.5.2.1.4

The HBN Intermediate Session table.

hbnIsInEntry row .1.3.6.1.2.1.34.7.1.6.1.1

Entry of the HBN Intermediate Session Table. An entry
exists in this table for every intermediate session being
routed between back-to-back RTP connections in the HBN.

When an entry for a session exists in…

Indexes

hbnIsInFqCpName hbnIsInPcid

Column	Syntax	OID
hbnIsInFqCpName The network-qualified control point name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either the CP name of the APPN node at which the origin LU is located or the CP name of the…	APPN-MIBSnaControlPointName Type Constraints: range: 3..17	.1.3.6.1.2.1.34.7.1.6.1.1.1
hbnIsInPcid The procedure correlation identifier (PCID) of a session. It is an 8-octet value. If this object has the same value as the appnIsInPcid object in the APPN MIB, and if the corresponding hbnIsInFqCpName obj…	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.7.1.6.1.1.2
hbnIsInRtpNceId The HPR local Network Connection Endpoint of the session in the direction of the SLU.	OctetString Constraints: range: 1-8	.1.3.6.1.2.1.34.7.1.6.1.1.3
hbnIsInRtpTcid The RTP connection local TCID of the session in the direction of the SLU.	OctetString Constraints: range: 8-8	.1.3.6.1.2.1.34.7.1.6.1.1.4