EATON-ATS2-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
13
ats2InputTable
table
.1.3.6.1.4.1.534.10.2.2.2
·
1 row entry
·
3 columns
Uses the eaton variant from
Command help
/opt/observium/mibs/eaton.
Walk ats2InputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EATON-ATS2-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EATON-ATS2-MIB::ats2InputTable'
The table of input information.
The input information of each source input:
<node>.1 source1
<node>.2 source2
<node>.1 source1
<node>.2 source2
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Index to input.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.2.2.1.1 |
||||
|
The input voltage in front of relay. Units are 0.1 V.
|
0.1 VInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.534.10.2.2.2.1.2 |
||||
|
The input frequency. Units are 0.1 Hz.
|
0.1 HzInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.534.10.2.2.2.1.3 |
ats2InputStatusTable
table.1.3.6.1.4.1.534.10.2.3.2
·
1 row entry
·
6 columns
Uses the eaton variant from
Command help
/opt/observium/mibs/eaton.
Walk ats2InputStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EATON-ATS2-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EATON-ATS2-MIB::ats2InputStatusTable'
The table of input status.
The input flow status:
<node>.1 source1
<node>.2 source2
<node>.1 source1
<node>.2 source2
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Index of input entry.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.3.2.1.1 |
||||||||
|
The status of input frequency.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.3.2.1.2 |
||||||||
|
The summarized status of input AC flow.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.3.2.1.3 |
||||||||
|
The internal fault status of input.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.3.2.1.4 |
||||||||
|
The status of input voltage.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.3.2.1.5 |
||||||||
|
The status of input relay.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.3.2.1.6 |
ats2ContactSenseTable
table.1.3.6.1.4.1.534.10.2.5.4
·
1 row entry
·
4 columns
Uses the eaton variant from
Command help
/opt/observium/mibs/eaton.
Walk ats2ContactSenseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EATON-ATS2-MIB' -M '/opt/observium/mibs/eaton:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EATON-ATS2-MIB::ats2ContactSenseTable'
A list of Contact Sensing table entries. The number of entries is given by the value of ats2EnvNumContacts.
An entry containing information applicable
to a particular Contact input.
to a particular Contact input.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Contact identifier; identical to the Contact Number.
This object is not-accessible to MIB browsers, but had to be changed to read-only to satisfy SMIv2 syntax checkers if it is included in traps. |
Integer32 Constraints: range: 1-1024 |
.1.3.6.1.4.1.534.10.2.5.4.1.1 |
||||||||
|
The normal state for this contact. The 'other' (not 'Normally')
state is the Active state for generating the ats2tdContactActiveNotice trap. If anyChange(3) is selected, then this trap is sent any time the contact cha… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.5.4.1.2 |
||||||||
|
The current state of the Contact input;
the value is based on the open/closed input state and the setting for ats2ContactType. When entering the openWithNotice(3) and closedWithNotice(4) states, no entries added to th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.534.10.2.5.4.1.3 |
||||||||
|
A label identifying the Contact. This object should be
set by the administrator. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.534.10.2.5.4.1.4 |