E5-111-MIB Table View

This table includes alarm configuration.

alarmConfEntry row .1.3.6.1.4.1.6321.1.2.3.2.2.2.1

An entry in alarmConfTable.

Indexes

No indexes recorded

Column	Syntax	OID
alarmConfId 5000:adslLine_up 5001:adslLine_down 5002:adslPerf_lol_thresh 5003:adslPerf_lof_thresh 5004:adslPerf_los_thresh 5005:adslPerf_lop_thresh 5006:adslPerf_es_thresh 5007:adslPerf_ses_thresh 5008:adslPerf_uas_thresh 5009:adsl…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.2.1.1
alarmConfFacility Alarm facility.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.2.2.1.2
alarmConfTarget The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.2.1.3
alarmConfSeverity Alarm severity	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.2.2.1.4
alarmConfClearable Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.	Enumerationr/w Enumerated Values: 1 critical 2 major 3 minor 4 info	.1.3.6.1.4.1.6321.1.2.3.2.2.2.1.5

This table includes current alarm information.

alarmCurrEntry row .1.3.6.1.4.1.6321.1.2.3.2.2.3.1

An entry in alarmCurrTable.

Indexes

No indexes recorded

Column	Syntax	OID
alarmCurrIndex Index of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.1
alarmCurrOccurTime Alarm occurence time (in hundredths of a second) since the system was last re-initialized.	RFC1155-SMITimeTicks Enumerated Values: 1 critical 2 major 3 minor 4 info Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.2
alarmCurrTrapOid Trap OID of the alarm.	ObjectIdentifier	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.3
alarmCurrParam1 The 1st parameter of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.4
alarmCurrParam2 The 2nd parameter of the alarm.	Integer32 Enumerated Values: 1 in 2 out 3 both 4 off Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.5
alarmCurrParam3 The 3rd parameter of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.6
alarmCurrParam4 The 4th parameter of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.7
alarmCurrParam5 The 5th parameter of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.8
alarmCurrParam6 The 6th parameter of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.9
alarmCurrParam7 The 7th parameter of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.10
alarmCurrParam8 The 8th parameter of the alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.11
alarmCurrTimeDescr The string representation of occurence time (YYYY/MM/DD HH:MM:SS).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.12
alarmCurrSeverity The severity of the alarm.	Enumeration	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.13
alarmCurrDescr The description of the alarm.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.6321.1.2.3.2.2.3.1.14

This table includes the configuration of alarm reporting severity threshold for each port.

alarmSeverityPortEntry row .1.3.6.1.4.1.6321.1.2.3.2.2.4.1

An entry in alarmSeverityPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
severityThresh The minimum alarm severity that is reported.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.2.4.1.1

Perform specified MLT relay function, or turn off
MLT relay function in specified subscriber.

mltRelayEntry row .1.3.6.1.4.1.6321.1.2.3.2.4.4.6.1

An entry of mltRelayTable.

Indexes

No indexes recorded

Column	Syntax	OID
mltRelaySet By default, relay function is turned off.	Enumerationr/w Constraints: range: 0-16	.1.3.6.1.4.1.6321.1.2.3.2.4.4.6.1.1

This table defines bandwidth budget for a range of multicast IP channels.

mcastBwEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1

An entry of mcastBwTable.

Indexes

mvlanIndex

Column	Syntax	OID
mcastBwIndex The index which specify the entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.1
mcastBwStartIp The start multicast IP of the bandwidth control range.	RFC1155-SMIIpAddress Constraints: range: 0-31	.1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.2
mcastBwEndIp The end multicast IP of the bandwidth control range.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.3
mcastBwBandwidth The bandwidth budget for the multicast IP channels.	KbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.4
mcastBwRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.7.4.3.1.5

This table specify the multicast bandwidth control of the port.

mcastBwPortEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1

An entry of mcastBwPortTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex mvlanTranslateIndex

Column	Syntax	OID
mcastBwPortEnable Enable/disable multicast bandwidth control for a port.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1.1
mcastBwPortBandwidth Set bandwidth threshold for a port.	KbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.7.4.4.1.2

This table specify the IGMP count limiting of the port.

igmpCountPortEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1

An entry of igmpCountPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
igmpCountPortEnable Enable/disable IGMP count limiting for a port.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1.1
igmpCountPortLimit The maximum allowed IGMP report count for a port.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.7.5.1.1.2

A table containing static configuration information for
each multicast VLAN configured into the device.

mvlanEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1

An entry of mvlanTable.

Indexes

No indexes recorded

Column	Syntax	OID
mvlanIndex The VLAN-ID refering to this VLAN.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.1
mvlanName An administratively assigned string, which may be used to identify the VLAN.	OctetStringr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.2
mvlanEgressPorts The set of ports which are permanently assigned to the egress list for this multicast VLAN.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.3
mvlanUntaggedPorts The set of ports which should transmit egress packets for this multicast VLAN as untagged.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.4
mvlanRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-31 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.7.6.2.1.5

A table that contains multicast to VLAN translation.

mvlanTranslateEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1

An entry of mvlanTranslateTable.

Indexes

No indexes recorded

Column	Syntax	OID
mvlanTranslateIndex The index which specif the entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.1
mvlanTranslateStartIp The start IP of the multicast VLAN translation.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.2
mvlanTranslateEndIp The end IP of the multicast VLAN translation.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.7.6.3.1.3

This table defines statically set VLANs used for response IGMP report.

qryVidConfEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1

An entry in qryVidConfTable.

Indexes

No indexes recorded

Column	Syntax	OID
qryVid VLAN ID.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1.1
qryVidRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.7.7.2.1.2

This table shows statically set or dynamically learned VLANs used for response IGMP report.

qryVidStatusEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.7.3.1

An entry in qryVidStatusTable.

Indexes

No indexes recorded

Column	Syntax	OID
qryVidType VLAN type.	Enumeration	.1.3.6.1.4.1.6321.1.2.3.2.7.7.3.1.1

A table that contains IGMP Profiles.

igmpProfileEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1

The entry of IGMP Profile table.

Indexes

No indexes recorded

Column	Syntax	OID
igmpProfileName The IGMP Profile name.	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.1
igmpProfileEnable Enable/disable IGMP Profile.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.2
igmpProfileMaxGroup Set maximum allowed multicast group, 1~64.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.3
igmpProfileRowStatus The row status of the IGMP Profile entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 gDotLite 2 gDotDmt 3 t1Dot413 4 auto 5 etsi 6 adsl2 7 adsl2Plus Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.7.13.2.1.4

A table that contains IGMP Filters.

igmpFilterEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1

The entry of IGMP Filter table.

Indexes

No indexes recorded

Column	Syntax	OID
igmpFilterIndex The index which specifies the filter rule.	Integer32 Enumerated Values: 1 enable 2 disable Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.1
igmpFilterStartIp The start IP of the filter rule.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.2
igmpFilterEndIp The end IP of the filter rule.	RFC1155-SMIIpAddressr/w Enumerated Values: 1 enableL2 2 enableL2 3 disable Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.7.13.3.1.3

This table specifies the IGMP Profile of the port.

igmpProfilePortEntry row .1.3.6.1.4.1.6321.1.2.3.2.7.13.4.1

An entry in igmpProfilePortTable.

Indexes

No indexes recorded

Column	Syntax	OID
igmpProfilePortProfile The IGMP Profile of the port.	OctetStringr/w Constraints: range: -50-200	.1.3.6.1.4.1.6321.1.2.3.2.7.13.4.1.1

This table includes subscriber attributes for the port.

subrPortEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.1.1

An entry in subrPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
subrPortName Name of the subscriber.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.1.1.1
subrPortTel Telephone number of the subscriber.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.1.1.2

This table includes common attributes describing the ADSL line.

adslLineConfEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1

An entry in adslLineConfTable.

Indexes

No indexes recorded

Column	Syntax	OID
adslLineConfAdslMode G.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.1
adslLineConfAnnexL Enable/disable annex L for the port(Only in AnnexA).	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.2
adslLineConfAnnexM Enable/disable annex M for the port(For BCM AnnexA solution).	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.3
adslLineConfAnnexI Enable/disable annex I for the port(For BCM AnnexA solution).	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.4
adslLineConfOptionMask The semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : Disable 1-bit constellation BIT 6 : Disable transmit windowi…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.5
adslLineConfPowerMgmt Enable/disable power management for the port.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.6
adslLineConfPowerMode The power mode of the ADSL line.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.7
adslLineConfAturMaxTxPower The maximum allowed transmit power of ATU-R.	tenth dBmInteger32r/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.8
adslLineConfAtucMaxTxPower The maximum allowed transmit power of ATU-C.	tenth dBmInteger32r/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.9
adslLineConfMaxRxPower The maximum aggregate received power.	tenth dBmInteger32r/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.10
adslLineConfAturCarrierMask The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31; CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. Bit set to 1 indicates the bin is masked off.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.11
adslLineConfAtucCarrierMask0 The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255; CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255. Bit set to 1 indicates the bin is masked off.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.12
adslLineConfAtucCarrierMask1 The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off.	OctetStringr/w Enumerated Values: 1 gDotLite 2 gDotDmt 3 t1Dot413 4 etsi 5 adsl2 6 adsl2Plus 7 none	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.13
adslLineConfAturInp The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.14
adslLineConfAtucInp The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.15
adslLineConfL0Time Set the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535; for BCM solution, the range is 10 ~ 65535.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.16
adslLineConfL2Time Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.17
adslLineConfL2ATPR Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. …	dBInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.18
adslLineConfL2ATPRT the maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease that is allowed to occur in the L2 power mode. For CTLM sol…	dBInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.19
adslLineConfMaxL2Rate configured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)	kbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.20
adslLineConfMinL2Rate configured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)	kbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.21
adslLineConfL0toL2Rate configured transition L0 to L2 rate. (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)	kbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.22
adslLineConfNitro Enable/disable nitro mode for the port(For BCM solution).	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.23
adslLineConfUSPhyr Enable/disable Upstream PHYR for the port(For BCM solution).	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.24
adslLineConfDSPhyr Enable/disable Downstream PHYR for the port(For BCM solution).	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.2.1.1.25

This table includes the ADSL line status.

adslLineStatusEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1

An entry in adslLineStatusTable.

Indexes

No indexes recorded

Column	Syntax	OID
adslLineStatusMode The link up mode of the ADSL line.	Enumeration	.1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1.1
adslLineUpTime The link up time of the ADSL line, in unit of seconds	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.4.1.2

This table defines L0 to L2 power transition parameters.

powerMgmtParamEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1

An entry in powerMgmtParamTable.

Indexes

No indexes recorded

Column	Syntax	OID
powerMgmtL0Time The object specifies the minimum time in L0 mode before L2 mode may be entered.	secondInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.1
powerMgmtL2Time The object specifies the minimum time in L2 mode before trimming and in between power trims.	secondInteger32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.2
powerMgmtL2Atpr The maximum Aggregate Transmit Power Reduction.	dBInteger32r/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.3
powerMgmtL2Atprt The maximum Aggregate Transmit Power Reduction Total.	dBInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.4
powerMgmtL2MinRate The object specifies the minimum L2 rate.	KbpsInteger32r/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.5
powerMgmtL2MaxRate The object specifies the maximum L2 rate.	KbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.6
powerMgmtL2ThreshRate The object specifies the rate threshold that triggers the line entering L0 or L2 mode.	KbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.5.1.7

This table provides the PSD setting for both ATU-C and ATU-R.

powerMgmtPSDEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1

An entry in powerMgmtPSDTable.

Indexes

No indexes recorded

Column	Syntax	OID
powerMgmtAtucMaxPSD The object specifies the maximum ATU-C PSD.	0.1dBm/HzInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1.1
powerMgmtAturMaxPSD The object specifies the maximum ATU-R PSD.	0.1dBm/HzInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.2.6.1.2

This table includes PVC configuration.

pvcEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1

An entry in pvcTable.

Indexes

No indexes recorded

Column	Syntax	OID
pvcVpi VPI of the pvc.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.1
pvcVci VCI of the pvc.	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.2
pvcPvid Default VID of the pvc.	Q-BRIDGE-MIBVlanIndex Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.3
pvcPriority 802.1p default priority of the pvc.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.5
pvcProfileDS The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.6
pvcRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 enable 2 disable Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.7
pvcProfileUS The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.8
pvcAcName Access concentrator name for paepvc.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.11
pvcServiceName Service name for paepvc.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.12
pvcHelloTime The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.	secondInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.4.2.1.13

This table show current PVC status.

pvcStateEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1

An entry in pvcStateTable.

Indexes

No indexes recorded

Column	Syntax	OID
pvcStateVpi VPI of the pvc.	Integer32 Enumerated Values: 1 llc 2 vc	.1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.1
pvcStateVci VCI of the pvc.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.2
pvcStatePvid Default VID of the pvc.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.3
pvcStatePriority 802.1p default priority of the pvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.4
pvcStateChannelType The value of this object identifies the channel type at runtime.	OctetString	.1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.8
pvcStateEncap The value of this object identifies the channel encapsulation at runtime.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.4.3.1.9

This table defines the upstream rate limit for each PVC.

pvcUsRateLimitEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1

An entry in pvcUsRateLimitTable.

Indexes

No indexes recorded

Column	Syntax	OID
pvcUsRateLimitEnable Enable/disable upstream rate limit for a PVC.	Enumerationr/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1.1
pvcUsRateLimit Upstream rate limit in Kbps for a PVC.	KbpsInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.4.4.1.2

This table includes priority PVC configuration.

ppvcEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1

An entry in ppvcTable.

Indexes

No indexes recorded

Column	Syntax	OID
ppvcVpi VPI of the ppvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.1
ppvcVci VCI of the ppvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.2
ppvcPvid Default VID of the ppvc.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.3
ppvcEncap Encapsulation of the ppvc.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.4
ppvcPriority 802.1p default priority of the ppvc.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.5
ppvcRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.5.2.1.6

This table includes priority PVC member configuration.

ppvcMemberEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1

An entry in ppvcMemberTable.

Indexes

No indexes recorded

Column	Syntax	OID
ppvcMemberVpi VPI of the member ppvc.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.1
ppvcMemberVci VCI of the member ppvc.	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.2
ppvcMemberPriority 802.1p default priority of the member ppvc.	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.3
ppvcMemberProfileDS The profile of the member ppvc in DS side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.4
ppvcMemberRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.5
ppvcMemberProfileUS The profile of the member ppvc in US side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.5.4.1.6

This table includes Routed Gateway configuration.

rpvcGatewayEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1

An entry in Routed Gateway table.

Indexes

No indexes recorded

Column	Syntax	OID
rpvcGatewayIp IP of RPVC gateway.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.1
rpvcGatewayVlanId Vlan id send to this RPVC gateway.	Q-BRIDGE-MIBVlanIndexr/w Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.2
rpvcGatewayRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Constraints: range: 1-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.3
rpvcGatewayPriority 802.1p p bit send to this RPVC gateway.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.8.1.1.4

This table includes RPVC configuration.

rpvcEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1

An entry in rpvcTable.

Indexes

No indexes recorded

Column	Syntax	OID
rpvcVpi VPI of the rpvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.1
rpvcVci VCI of the rpvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.2
rpvcDSProfile The down stream profile of the rpvc.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.3
rpvcUSProfile The up stream profile of the rpvc.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.4
rpvcIp The IP of the rpvc.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.5
rpvcNetmask The IP mask of the rpvc IP.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.6
rpvcGatewayIpAddress The gateway IP of rpvc.	RFC1155-SMIIpAddressr/w Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.7
rpvcRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Constraints: range: 1-65535 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.8.2.1.8

This table includes RPVC route domain configuration.

rpvcRouteDomainEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1

An entry in rpvcRouteDomainTable.

Indexes

No indexes recorded

Column	Syntax	OID
rpvcRouteDomainVpi VPI of the rpvc.	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.1
rpvcRouteDomainVci VCI of the rpvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.2
rpvcRouteDomainIp The route domain IP.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.3
rpvcRouteDomainNetmask The IP mask of the route domain IP.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.4
rpvcRouteDomainRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.8.3.1.5

This table includes Down Stream Bcast configuration.

dsBcastDisableEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.9.1

An entry in Down Stream Bcast table.

Indexes

No indexes recorded

Column	Syntax	OID
dsBcastDisableVlanId downstream broadcast disabled vid.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.9.1.1
dsBcastDisableRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.9.1.2

This table includes PPPoAoE PVC configuration.

paepvcEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1

An entry of paepvcTable.

Indexes

No indexes recorded

Column	Syntax	OID
paepvcVpi VPI of the pvc.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.1
paepvcVci VCI of the pvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.2
paepvcPvid Default VID of the pvc.	Q-BRIDGE-MIBVlanIndex Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.3
paepvcPriority 802.1p default priority of the pvc.	Integer32r/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.5
paepvcProfileDS The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.6
paepvcAcName Access concentrator name.	RFC1213-MIBDisplayStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.7
paepvcServiceName Service name.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.8
paepvcHelloTime The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.	secondInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.9
paepvcRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.10
paepvcProfileUS The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.11
paepvcCvid Default C-VID of the pvc.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.12
paepvcCPriority 802.1p default C-priority of the pvc.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.10.1.1.13

This table includes Transparent LAN Service (TLS) PVC configuration.

tlspvcEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1

An entry of tlspvcTable.

Indexes

No indexes recorded

Column	Syntax	OID
tlspvcVpi VPI of the pvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.1
tlspvcVci VCI of the pvc.	Integer32	.1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.2
tlspvcSvid s-tag VLAN ID of the pvc.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.3
tlspvcSpriority s-tag priority of the pvc.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.5
tlspvcProfileDS The value of this object identifies the row in the atmProfileTable, which applies for this pvc in DS side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.6
tlspvcRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.7
tlspvcProfileUS The value of this object identifies the row in the atmProfileTable, which applies for this pvc in US side.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.11.1.1.8

This table includes ipbpvc domain configuration.
This table is supported by R3.00 and later versions.

ipbpvcDomainEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1

An entry of ipbpvcDomainTable.

Indexes

ipbpvcDomainName ipbpvcInterfaceIp ipbpvcInterfaceMask ipbpvcInterfaceVid

Column	Syntax	OID
ipbpvcDomainName Name of the domain.	OctetString	.1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1.1
ipbpvcDomainRowStatus Row status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.12.1.1.2

This table includes ipbpvc domain VLAN configuration.
This table is supported by R3.00 and later versions.

ipbpvcDomainVlanEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1

An entry of ipbpvcDomainVlanTable.

Indexes

No indexes recorded

Column	Syntax	OID
ipbpvcDomainVlanId Set VLAN to join or leave the specified domain.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.1
ipbpvcDomainDhcpVlanEnable Enable/disable DHCP VLAN in a domain.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.2
ipbpvcDomainVlanRowStatus Row status of the table used to create/delete an entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.12.2.1.3

This table includes ipbpvc edge router configuration.
This table is supported by R3.00 and later versions.

ipbpvcEdgeRouterEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1

An entry of ipbpvcEdgeRouterTable.

Indexes

ipbpvcDomainName ipbpvcRouteIp ipbpvcRouteMask ipbpvcRouteNextHop

Column	Syntax	OID
ipbpvcEdgeRouterIp IP address of the edge router.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.1
ipbpvcEdgeRouterVid VLAN ID of the edge router.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.2
ipbpvcEdgeRouterMask Netmask of the edge router.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.3
ipbpvcEdgeRouterRowStatus Row status of the table used to create/delete an entry.	SNMPv2-TCRowStatusr/w Constraints: range: 1-15 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.12.3.1.4

This table includes ipbpvc interface configuration.
This table is supported by R3.00 and later versions.

ipbpvcInterfaceEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1

An entry of ipbpvcInterfaceTable.

Indexes

No indexes recorded

Column	Syntax	OID
ipbpvcInterfaceIp IP address of the interface.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.1
ipbpvcInterfaceMask Netmask of the interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.2
ipbpvcInterfaceVid VLAN ID of the interface.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.3
ipbpvcInterfaceIfIndex IfIndex of the interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.4
ipbpvcInterfaceVpi VPI of the interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.5
ipbpvcInterfaceVci VCI of the interface.	Integer32r/w Enumerated Values: 1 ipoe 2 reserved 3 ipoa Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.6
ipbpvcInterfaceRowStatus Row status of the table used to create/delete an entry.	SNMPv2-TCRowStatusr/w Constraints: range: 0-7 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.12.4.1.7

This table includes ipbpvc route configuration.
This table is supported by R3.00 and later versions.

ipbpvcRouteEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1

An entry of ipbpvcRouteTable.

Indexes

No indexes recorded

Column	Syntax	OID
ipbpvcRouteIp IP address of the route.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.1
ipbpvcRouteMask Netmask of the route.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.2
ipbpvcRouteNextHop Next hop IP address of the route.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.3
ipbpvcRouteMetric Metric of the route.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.4
ipbpvcRoutePriority Priority of the route. Note that the default value of this object is 8, which means we keep the original priority of the packet(frame).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.5
ipbpvcRouteRowStatus Row status of the table used to create/delete an entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.12.5.1.6

This table includes ipbpvc configuration.
This table is supported by R3.00 and later versions.

ipbpvcEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1

An entry of ipbpvcTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ipbpvcVpi VPI of the PVC.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.1
ipbpvcVci VCI of the PVC.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.2
ipbpvcPvid PVID of the PVC.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.3
ipbpvcEncap Type of the PVC.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.4
ipbpvcPriority Priority of the PVC.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.5
ipbpvcProfile Profile of the PVC.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.6
ipbpvcRowStatus Row status of the table used to create/delete an entry.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.7
ipbpvcProfileUS US Profile of the PVC.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.12.6.1.8

This table includes common attributes describing the VoIP line.

voipSipLineConfEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1

An entry in voipSipLineConfTable.

Indexes

No indexes recorded

Column	Syntax	OID
voipSipLineConfSipProfile SIP profile name.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.1
voipSipLineConfSipCallSvcProfile SIP call service profile name.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.2
voipSipLineConfDspProfile DSP profile name.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.13.1.1.3

This table includes VoIP tel for the port.

voipPortTelEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.13.3.1

An entry in voipPortTelTable.

Indexes

RFC1213-MIBifIndex dtpvcVpi dtpvcVci dtpvcSvid

Column	Syntax	OID
voipPortTel VoIP's telephone number of the specified port.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.13.3.1.1

This table includes Port Gain.

voipPortGainEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1

An entry in voipPortGainTable.

Indexes

No indexes recorded

Column	Syntax	OID
voipPortTXGain TX Gain of the port, -200~200 in unit of 0.1dB.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1.1
voipPortRXGain RX Gain of the port, -200~200 in unit of 0.1dB.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.8.13.6.1.2

This table includes common attributes describing the VoIP line.

voipH248LineConfEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1

An entry in voipH248LineConfTable.

Indexes

No indexes recorded

Column	Syntax	OID
voipH248LineConfMgName MG name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.1
voipH248LineConfDspProfile DSP profile name.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.2
voipH248LineConfVBDProfile DSP profile name for Voice Band Data (FAX or Modem) mode.	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6321.1.2.3.2.8.13.7.1.3

This table includes Termination name.

voipPortH248TerminationEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.13.8.1

An entry in voipPortH248TerminationTable.

Indexes

No indexes recorded

Column	Syntax	OID
voipPortH248TermName Termination name of MG.	OctetString	.1.3.6.1.4.1.6321.1.2.3.2.8.13.8.1.1

This table includes Double Tagging (DT) PVC configuration.

dtpvcEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1

An entry of dtpvcTable.

Indexes

RFC1213-MIBifIndex dtpvcStateVpi dtpvcStateVci dtpvcStateSvid

Column	Syntax	OID
dtpvcVpi VPI of the pvc.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.1
dtpvcVci VCI of the pvc.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.2
dtpvcSvid s-tag VLAN ID of the pvc.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.3
dtpvcSpriority s-tag priority of the pvc.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.4
dtpvcCvid c-tag VLAN ID of the pvc.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.5
dtpvcCpriority c-tag priority of the pvc.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.6
dtpvcDSProfile The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in DS side.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.7
dtpvcUSProfile The value of this object identifies the row in the atmProfileTable, which applies for this dtpvc in US side.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.8
dtpvcRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.9
dtpvcSuperChannel Specified the configured DTPVC is a super channel.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.10
dtpvcAcName Access concentrator name for paepvc.	RFC1213-MIBDisplayStringr/w Enumerated Values: 0 profile 1 line	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.11
dtpvcServiceName Service name for paepvc.	RFC1213-MIBDisplayStringr/w Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.12
dtpvcHelloTime The system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.	secondInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.1.1.13

This table show current DTPVC status.

dtpvcStateEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1

An entry in dtpvcStateTable.

Indexes

No indexes recorded

Column	Syntax	OID
dtpvcStateVpi VPI of the dtpvc.	Integer32 Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.1
dtpvcStateVci VCI of the dtpvc.	Integer32 Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.2
dtpvcStateSvid Default S-VID of the dtpvc.	Q-BRIDGE-MIBVlanIndex Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.3
dtpvcStateSPriority S-priority of the dtpvc.	Integer32 Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.4
dtpvcStateCvid Default C-VID of the dtpvc.	Q-BRIDGE-MIBVlanIndex Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.5
dtpvcStateCPriority C-priority of the dtpvc.	Integer32 Constraints: range: 0-310	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.6
dtpvcStateChannelType The value of this object identifies the channel type at runtime.	OctetString	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.8
dtpvcStateEncap The value of this object identifies the channel encapsulation at runtime.	OctetString	.1.3.6.1.4.1.6321.1.2.3.2.8.14.2.1.9

A table containing the per port SNR Margin configuration.

snrMgnEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1

An entry of snrMgnTable.

Indexes

No indexes recorded

Column	Syntax	OID
snrMgnMode Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration.	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.1
snrMgnUcTarget Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.2
snrMgnUcMax Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.3
snrMgnUcMin Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or s…	tenth dBInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.4
snrMgnUcDownshift Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.5
snrMgnUcUpshift Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.6
snrMgnUrTarget Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.7
snrMgnUrMax Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.8
snrMgnUrMin Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or s…	tenth dBInteger32r/w Constraints: range: 0-31	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.9
snrMgnUrDownshift Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.10
snrMgnUrUpshift Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.	tenth dBInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.15.1.1.11

A table containing the per port DSL Rate configuration.

dslRateEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1

An entry of dslRateTable.

Indexes

No indexes recorded

Column	Syntax	OID
dslRateMode Configure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration comes from line configuration.	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.1
dslRateLatencyMode The latency mode is fast or interleave	Enumeration	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.2
dslRateXtucMaxInterleaveDelay Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver i…	milli-secondsInteger32r/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.3
dslRateXtucMaxTxRate Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.4
dslRateXtucMinTxRate Configured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps	kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.5
dslRateXturMaxInterleaveDelay Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver i…	milli-secondsInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.6
dslRateXturMaxTxRate Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.	kbpsSNMPv2-SMIUnsigned32r/w Constraints: range: 1025-65535	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.7
dslRateXturMinTxRate Configured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.	kbpsSNMPv2-SMIUnsigned32r/w Constraints: range: 1025-65535	.1.3.6.1.4.1.6321.1.2.3.2.8.16.1.1.8

A table containing the G.Bond configuration information for
each bonding group of the device.

gbondGroupEntry row .1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1

An entry of gbondTable.

Indexes

No indexes recorded

Column	Syntax	OID
gbondGroupName An administratively assigned string, which may be used to identify bonding group.	OctetString Constraints: range: 0-7	.1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.1
gbondGroupPorts The set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved Byte 5~11:each octet specifies a set of eight p…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.2
gbondGroupUpRate The UP stream rate.	SNMPv2-SMIUnsigned32 Enumerated Values: 1 on 2 off Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.4
gbondGroupDownRate The DOWN stream rate.	SNMPv2-SMIUnsigned32 Constraints: range: 90-65535	.1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.5
gbondGroupRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 on 2 off Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.8.51.1.1.6

This table includes SIP protocol related configuration.

sipProfileEntry row .1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1

An entry in sipProfileTable.

Indexes

No indexes recorded

Column	Syntax	OID
sipProfileName This object is used by the SIP profile table in order to identify a row of this table.	OctetString	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.1
sipProfileSipSvr IP used for SIP registration or SIP domain name.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.2
sipProfileRegSvr Registration server IP or registration server domain name.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.3
sipProfileProxySvr Proxy server IP or proxy server doamin name.	OctetStringr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.4
sipProfileSipPort SIP UA port number.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.5
sipProfileRegSvrPort Registration server port number.	Integer32r/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.6
sipProfileProxySvrPort Proxy server port number.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.7
sipProfileUriType	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.8
sipProfilePbit 802.1p bit for SIP and RTP packet.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.9
sipProfileDscp DSCP for SIP and RTP packet.	Integer32r/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.10
sipProfileKeepAlive	Enumerationr/w Enumerated Values: 1 bypass 2 rfc2833 3 rfc2833like 4 sipinfo	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.11
sipProfileSe Session expiration time in seconds.	secondInteger32r/w Enumerated Values: 1 g711 2 t38	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.12
sipProfilePrack	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.13
sipProfileRowStatus This object is used to create a new row or delete an existing row in the table.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 invite 2 rfc2833 3 rfc2833like 4 sipinfo-1 5 sipinfo-2 6 sipinfo-3 7 sipinfo-4 8 sipinfo-5 9 sipinfo-6 10 bypass Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.14
sipProfileRegExpire Registration expiration time in seconds.	secondInteger32r/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.2.1.15

This table includes SIP call service related configuration.

sipCallSvcProfileEntry row .1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1

An entry in sipCallSvcProfileTable.

Indexes

No indexes recorded

Column	Syntax	OID
sipCallSvcProfileName This object is used by the SIP call service profile table in order to identify a row of this table.	OctetString	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.1
sipCallSvcProfilePasswdOn Password is necessary or not for SIP registration.	Enumerationr/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.2
sipCallSvcProfilePasswd SIP registration password.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.3
sipCallSvcProfileNumberPlanOn	Enumerationr/w Constraints: range: 10-500	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.4
sipCallSvcProfileNumberPlanCc Country code, only digit 0..9 are allowed.	OctetStringr/w Constraints: range: 10-500	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.5
sipCallSvcProfileNumberPlanNdc National destination code, only digit 0..9 are allowed.	OctetStringr/w Enumerated Values: 1 echotail8 2 echotail16 3 echotail32 4 echotail128	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.6
sipCallSvcProfileNumberPlanTable Numbering plan table name.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.7
sipCallSvcProfileStateMask Bit 1 callforward : call forward(Not supported) Bit 2 callhold : call hold Bit 3 callwait : call waiting Bit 4 callreturn : call return(Not supported) Bit 5 calltransfer : call transfer Bit 6 clip : caller line identifi…	Integer32r/w Enumerated Values: 1 g711x10ms 2 g711x20ms 3 g711x30ms 4 g711x40ms Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.8
sipCallSvcProfileDtmf dtmf bypass : bypass DTMF tone dtmf rfc2833 : DTMF tone relay according to RFC2833 dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload dtmf sipinfo : DTMF tone relay by SIP INFO message	Enumerationr/w Enumerated Values: 1 g723x30ms 2 g723x60ms	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.9
sipCallSvcProfileFax fax g711 : FAX service pass through by ITU-T G.711 fax t38 : FAX service by ITU-T T.38	Enumerationr/w Enumerated Values: 1 g726x10ms 2 g726x20ms 3 g726x30ms 4 g726x40ms	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.10
sipCallSvcProfileRowStatus This object is used to create a new row or delete an existing row in the table.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 g729x10ms 2 g729x20ms 3 g729x30ms 4 g729x40ms 5 g729x50ms 6 g729x60ms Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.11
sipCallSvcProfileFlashType flash invite : will send SIP INVITE message while press flash button. flash bypass : flash event will be handled by current switch type specified in sipCallSvcProfileSwitchType. flash rfc2833 : flash event will sen…	Enumerationr/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.12
sipCallSvcProfileFlashInfo Strings carried in SIP INFO when specified in sipCallSvcProfileFlashType is sipinfo-5 and sipinfo-6.	OctetStringr/w	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.13
sipCallSvcProfileSoftSwitchType Softswitch type is configured to specify softswitch-dependent behavior, currently only flash event is softswitch-dependent and should follow the softswitch type setting. When configured the flash event to 'bypass', E5 w…	Enumerationr/w Constraints: range: 1-31	.1.3.6.1.4.1.6321.1.2.3.2.9.7.1.4.1.14