NAL: Lost communication with device
has been re-established.
The first argument is the serial number.
The second argument is the device name.
keypadButtonStuckSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.10
pad button stuck has been set.
The first argument is the serial number.
The second argument is the device name.
configChangeSNMP
.1.3.6.1.4.1.674.10903.200.2.200.500.0.1000
MINOR: The SNMP configuration has been changed.
accessViolationConsole
.1.3.6.1.4.1.674.10903.200.2.200.500.0.1001
eone attempted console login with incorrect password
three times.
accessViolationHTTP
.1.3.6.1.4.1.674.10903.200.2.200.500.0.1002
MINOR: Someone attempted login via HTTP with incorrect password.
dellTestTrap
.1.3.6.1.4.1.674.10903.200.2.200.500.0.1003
NAL: Trap used to test SNMP trap functionality.
The first argument is a place holder for test variables.
dryContactAbnormalCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.11
NAL: Dry Contact is no longer in an abnormal state.
The first argument is the serial number.
The second argument is the device name.
The third argument is the contact number.
dryContactAbnormalSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.12
Dry Contact has moved to an abnormal state.
The first argument is the serial number.
The second argument is the device name.
The third argument is the contact number.
deviceLowLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.13
NAL: Device load is no longer below the 'Low Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
deviceLowLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.14
ice load has fallen below the 'Low Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
deviceNearOverLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.15
NAL: Device load no longer exceeds the 'Near Over Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
deviceNearOverLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.16
ice load has exceeded the 'Near Over Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
deviceOverLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.17
NAL: Device load no longer exceeds the 'Over Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
deviceOverLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.18
Device load has exceeded the 'Over Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
phaseLowLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.19
NAL: Phase load is no longer below the 'Low Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
deviceCommunicationLostSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.2
Lost communication with device.
The first argument is the serial number.
The second argument is the device name.
phaseLowLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.20
se load has fallen below the 'Low Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
phaseNearOverLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.21
NAL: Phase load no longer exceeds the 'Near Over Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
phaseNearOverLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.22
se load has exceeded the 'Near Over Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
phaseOverLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.23
NAL: Phase load no longer exceeds the 'Over Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
phaseOverLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.24
Phase load has exceeded the 'Over Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
outletLowLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.25
NAL: Outlet load is no longer below the 'Low Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
outletLowLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.26
let load had fallen below the 'Low Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
outletNearOverLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.27
NAL: Outlet load no longer exceeds the 'Near Over Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
outletNearOverLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.28
let load has exceeded the 'Near Over Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
outletOverLoadCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.29
NAL: Outlet load no longer exceeds the 'Over Load'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
componentCommLostCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.3
NAL: Lost communication with an on board component
has been re-established.
The first argument is the serial number.
The second argument is the device name.
outletOverLoadSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.30
Outlet load has exceeded the 'Over Load' threshold
value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
sensorDisconnectedCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.31
NAL: Sensor disconnected condition cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
sensorDisconnectedSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.32
sor disconnected condition set.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
sensorTypeIndeterminateCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.33
NAL: Sensor type indeterminate condition cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
sensorTypeIndeterminateSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.34
sor type indeterminate condition set.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
sensorTypeUnsupportedCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.35
NAL: Sensor type unsupported condition cleared.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
sensorTypeUnsupportedSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.36
sor type unsupported condition set.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
maxTemperatureExceededCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.37
NAL: Sensor Temperature no longer exceeds the
'Max Temperature' threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
maxTemperatureExceededSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.38
Sensor Temperature has exceeded the 'Max Temperature'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
highTemperatureExceededCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.39
NAL: Sensor Temperature no longer exceeds the 'High
Temperature' threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
componentCommLostSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.4
Lost communication with an on board component.
The first argument is the serial number.
The second argument is the device name.
highTemperatureExceededSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.40
sor Temperature has exceeded the 'High Temperature'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
lowHumidityExceededCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.41
NAL: Sensor Humidity is no longer below the 'Low
Humidity' threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
lowHumidityExceededSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.42
sor Humidity has fallen below the 'Low Humidity'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
minHumidityExceededCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.43
NAL: Sensor Humidity is no longer below the 'Min
Humidity' threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
minHumidityExceededSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.44
Sensor Humidity has fallen below the 'Min Humidity'
threshold value.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
outletTurnOn
.1.3.6.1.4.1.674.10903.200.2.200.500.0.45
NAL: An outlet has turned on.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
outletTurnOff
.1.3.6.1.4.1.674.10903.200.2.200.500.0.46
NAL: An outlet has turned off.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
actionCancelled
.1.3.6.1.4.1.674.10903.200.2.200.500.0.47
NAL: An outlet action has been cancelled.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
deviceConfigurationChange
.1.3.6.1.4.1.674.10903.200.2.200.500.0.48
NAL: A device configuration has been changed.
The first argument is the serial number.
The second argument is the device name.
sensorConfigurationChange
.1.3.6.1.4.1.674.10903.200.2.200.500.0.49
NAL: A sensor configuration has been changed.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
cANBusOffCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.5
NAL: CAN bus off condition was cleared.
The first argument is the serial number.
The second argument is the device name.
outletConfigurationChange
.1.3.6.1.4.1.674.10903.200.2.200.500.0.50
NAL: An outlet configuration has been changed.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
phaseConfigurationChange
.1.3.6.1.4.1.674.10903.200.2.200.500.0.51
NAL: A phase configuration has been changed.
The first argument is the serial number.
The second argument is the device name.
The third argument is the phase number.
dryContactConfigurationChange
.1.3.6.1.4.1.674.10903.200.2.200.500.0.52
NAL: A dry contact configuration has been changed.
The first argument is the serial number.
The second argument is the device name.
The third argument is the contact number.
actionInit
.1.3.6.1.4.1.674.10903.200.2.200.500.0.53
NAL: An outlet action has been initialized.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
actionFailed
.1.3.6.1.4.1.674.10903.200.2.200.500.0.54
outlet action has failed to complete.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
actionDeleted
.1.3.6.1.4.1.674.10903.200.2.200.500.0.55
NAL: An outlet action has been deleted.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
syncCommandFailed
.1.3.6.1.4.1.674.10903.200.2.200.500.0.56
outlet sync command to another unit has failed.
The first argument is the serial number.
The second argument is the device name.
The third argument is the outlet number.
mPOPicFwDownloadStarted
.1.3.6.1.4.1.674.10903.200.2.200.500.0.57
NAL: MPO pic fw download started.
The first argument is the serial number.
The second argument is the device name.
mPOPicFwDownloadComplete
.1.3.6.1.4.1.674.10903.200.2.200.500.0.58
NAL: MPO pic fw download complete.
The first argument is the serial number.
The second argument is the device name.
mPOPicFwDownloadAborted
.1.3.6.1.4.1.674.10903.200.2.200.500.0.59
NAL: MPO pic fw download aborted.
The first argument is the serial number.
The second argument is the device name.
canBusOffSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.6
bus off condition was set.
The first argument is the serial number.
The second argument is the device name.
sensorCommEstablished
.1.3.6.1.4.1.674.10903.200.2.200.500.0.60
NAL: Sensor comm established.
The first argument is the serial number.
The second argument is the device name.
The third argument is the sensor number.
powerSupplyFailureCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.7
NAL: Unit's power supply voltage is no longer out of
tolerance.
The first argument is the serial number.
The second argument is the device name.
powerSupplyFailureSet
.1.3.6.1.4.1.674.10903.200.2.200.500.0.8
Unit's power supply voltage is out of tolerance.
The first argument is the serial number.
The second argument is the device name.
keypadButtonStuckCleared
.1.3.6.1.4.1.674.10903.200.2.200.500.0.9
NAL: Keypad button stuck has been cleared.
The first argument is the serial number.
The second argument is the device name.