DRAFT-IGMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
23
.1.3.6.1.3.59.1.1.1 · 1 row entry · 15 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk igmpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DRAFT-IGMP-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DRAFT-IGMP-MIB::igmpInterfaceTable'
The (conceptual) table listing the interfaces on which IGMP
is enabled.
igmpInterfaceEntry row .1.3.6.1.3.59.1.1.1.1
An entry (conceptual row) representing an interface on
which IGMP is enabled.
Column Syntax OID
The ifIndex value of the interface for which IGMP is
enabled.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.3.59.1.1.1.1.1
The frequency at which IGMP Host-Query packets are
transmitted on this interface.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.3.59.1.1.1.1.2
The activation of a row enables IGMP on the interface. The
destruction of a row disables IGMP on the interface.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.3.59.1.1.1.1.3
The version of IGMP which is running on this interface.
This object can be used to configure a router capable of
running either value. For IGMP to function correctly, all
routers on a LAN must be configured to run the …
Enumeration
Enumerated Values:
1version1
2version2
.1.3.6.1.3.59.1.1.1.1.4
The address of the IGMP Querier on the IP subnet to which
this interface is attached.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.3.59.1.1.1.1.5
The maximum query response time advertised in IGMPv2
queries on this interface.
tenths of secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.3.59.1.1.1.1.6
The time remaining until the host assumes that there are no
IGMPv1 routers present on the interface. While this is non-
zero, the host will reply to all queries with version 1
membership reports.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.1.1.9
The number of queries received whose IGMP version does not
match igmpInterfaceVersion. IGMP requires that all routers
on a LAN be configured to run the same version of IGMP.
Thus, if any queries are received with the …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.1.1.10
The number of times a group membership has been added on
this interface; that is, the number of times an entry for
this interface has been added to the Cache Table. This
object gives an indication of the amount of IGMP…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.1.1.11
The current number of entries for this interface in the
Cache Table.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.1.1.13
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.3.59.1.1.1.1.14
The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages. This value ma…
tenths of secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.3.59.1.1.1.1.15
Some devices implement a form of IGMP proxying whereby
memberships learned on the interface represented by this
row, cause IGMP Host Membership Reports to be sent on the
interface whose ifIndex value is given by this ob…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.3.59.1.1.1.1.16
The time since igmpInterfaceQuerier was last changed.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.1.1.17
The amount of time remaining before the Other Querier
Present Timer expires. If the local system is the querier,
the value of this object is zero.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.1.1.18
.1.3.6.1.3.59.1.1.2 · 1 row entry · 8 columns
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk igmpCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DRAFT-IGMP-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DRAFT-IGMP-MIB::igmpCacheTable'
The (conceptual) table listing the IP multicast groups for
which there are members on a particular interface.
igmpCacheEntry row .1.3.6.1.3.59.1.1.2.1
An entry (conceptual row) in the igmpCacheTable.
Column Syntax OID
The IP multicast group address for which this entry
contains information.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.3.59.1.1.2.1.1
The interface for which this entry contains information for
an IP multicast group address.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.3.59.1.1.2.1.2
An indication of whether the local system is a member of
this group address on this interface.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.3.59.1.1.2.1.3
The IP address of the source of the last membership report
received for this IP Multicast group address on this
interface. If no membership report has been received, this
object has the value 0.0.0.0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.3.59.1.1.2.1.4
The time elapsed since this entry was created.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.2.1.5
The minimum amount of time remaining before this entry will
be aged out. A value of 0 indicates that the entry is only
present because igmpCacheSelf is true and that if the router
left the group, this entry would be ag…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.2.1.6
The status of this entry.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.3.59.1.1.2.1.7
The time remaining until the local router will assume that
there are no longer any IGMP version 1 members on the IP
subnet attached to this interface. Upon hearing any IGMPv1
Membership Report, this value is reset to t…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.3.59.1.1.2.1.8