DOT12-RPTR-MIB Table View

A table of information about each 802.12 repeater
in the managed system.

vgRptrInfoEntry row .1.3.6.1.2.1.53.1.1.1.1.1

An entry in the table, containing information
about a single repeater.

Indexes

vgRptrInfoIndex

Column	Syntax	OID
vgRptrInfoIndex A unique identifier for the repeater for which this entry contains information. The numbering scheme for repeaters is implementation specific.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.53.1.1.1.1.1.1
vgRptrInfoMACAddress The MAC address used by the repeater when it initiates training on the uplink port. Repeaters are allowed to train with an assigned MAC address or a null (all zeroes) MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.2.1.53.1.1.1.1.1.2
vgRptrInfoCurrentFramingType The type of framing (802.3 or 802.5) currently in use by the repeater.	Enumeration Enumerated Values: 1 frameType88023 2 frameType88025	.1.3.6.1.2.1.53.1.1.1.1.1.3
vgRptrInfoDesiredFramingType The type of framing which will be used by the repeater after the next time it is reset. The value of this object should be preserved across repeater resets and power failures.	Enumerationr/w Enumerated Values: 1 frameType88023 2 frameType88025	.1.3.6.1.2.1.53.1.1.1.1.1.4
vgRptrInfoFramingCapability The type of framing this repeater is capable of supporting.	Enumeration Enumerated Values: 1 frameType88023 2 frameType88025 3 frameTypeEither	.1.3.6.1.2.1.53.1.1.1.1.1.5
vgRptrInfoTrainingVersion The highest version bits (vvv bits) supported by the repeater during training.	Integer32 Constraints: range: 0-7	.1.3.6.1.2.1.53.1.1.1.1.1.6
vgRptrInfoOperStatus The vgRptrInfoOperStatus object indicates the operational state of the repeater.	Enumeration Enumerated Values: 1 other 2 ok 3 generalFailure	.1.3.6.1.2.1.53.1.1.1.1.1.7
vgRptrInfoReset Setting this object to reset(2) causes the repeater to transition to its initial state as specified in clause 12 [IEEE Std 802.12]. Setting this object to noReset(1) has no effect. The agent will always r…	Enumerationr/w Enumerated Values: 1 noReset 2 reset	.1.3.6.1.2.1.53.1.1.1.1.1.8
vgRptrInfoLastChange The value of sysUpTime when any of the following conditions occurred: 1) agent cold- or warm-started; 2) this instance of repeater was created (such as when a device or module was ad…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.53.1.1.1.1.1.9

A table containing information about groups of
ports.

vgRptrBasicGroupEntry row .1.3.6.1.2.1.53.1.1.2.1.1

An entry in the vgRptrBasicGroupTable, containing
information about a single group of ports.

Indexes

vgRptrGroupIndex

Column	Syntax	OID
vgRptrGroupIndex This object identifies the group within the system for which this entry contains information. The numbering scheme for groups is implementation specific.	Integer32 Constraints: range: 1-2146483647	.1.3.6.1.2.1.53.1.1.2.1.1.1
vgRptrGroupObjectID The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of gr…	ObjectIdentifier	.1.3.6.1.2.1.53.1.1.2.1.1.2
vgRptrGroupOperStatus An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/or logically not a part of the system. It is …	Enumeration Enumerated Values: 1 other 2 operational 3 malfunctioning 4 notPresent 5 underTest 6 resetInProgress	.1.3.6.1.2.1.53.1.1.2.1.1.3
vgRptrGroupPortCapacity The vgRptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-2147483647. Within each group, the ports are uniquely numbered in the range from 1 to vgRptrGroupPortCapacity.…	Integer32 Constraints: range: 1-2146483647	.1.3.6.1.2.1.53.1.1.2.1.1.4
vgRptrGroupCablesBundled This object is used to indicate whether there are any four-pair UTP links connected to this group that are contained in a cable bundle with multiple four-pair groups (e.g. a 25-pair bundle). Bundled cable may only be u…	Enumerationr/w Enumerated Values: 1 someCablesBundled 2 noCablesBundled	.1.3.6.1.2.1.53.1.1.2.1.1.5

A table containing configuration and status
information about 802.12 repeater ports in the
system.  The number of entries is independent of
the number of repeaters in the managed system.

vgRptrBasicPortEntry row .1.3.6.1.2.1.53.1.1.3.1.1

An entry in the vgRptrBasicPortTable, containing
information about a single port.

Indexes

vgRptrGroupIndex vgRptrPortIndex

Column	Syntax	OID
vgRptrPortIndex This object identifies the port within the group for which this entry contains information. This identifies the port independently from the repeater it may be attached to. The numbering scheme for ports is implementat…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.53.1.1.3.1.1.1
vgRptrPortType Describes the type of port. One of the following: cascadeExternal - Port is an uplink with physical connections which are externally visible cascadeInt…	Enumeration Enumerated Values: 1 cascadeExternal 2 cascadeInternal 3 localExternal 4 localInternal	.1.3.6.1.2.1.53.1.1.3.1.1.2
vgRptrPortAdminStatus Port enable/disable function. Enabling a disabled port will cause training to be initiated by the training initiator (the slave mode device) on the link. Setting this object to disabled(2) disables the port. …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.53.1.1.3.1.1.3
vgRptrPortOperStatus Current status for the port as specified by the PORT_META_STATE in the port process module of clause 12 [IEEE Std 802.12]. During initialization or any link warning conditions, vgRptrPortStatus will be 'i…	Enumeration Enumerated Values: 1 active 2 inactive 3 training	.1.3.6.1.2.1.53.1.1.3.1.1.4
vgRptrPortSupportedPromiscMode This object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater filters unicasts not addressed to the end station attached to this port), or both. A port f…	Enumeration Enumerated Values: 1 singleModeOnly 2 singleOrPromiscMode 3 promiscModeOnly	.1.3.6.1.2.1.53.1.1.3.1.1.5
vgRptrPortSupportedCascadeMode This object describes whether the port hardware is capable of supporting cascaded repeaters, end nodes, or both. A port for which vgRptrPortType is equal to 'cascadeInternal' or 'cascadeExternal' will always have a val…	Enumeration Enumerated Values: 1 endNodesOnly 2 endNodesOrRepeaters 3 cascadePort	.1.3.6.1.2.1.53.1.1.3.1.1.6
vgRptrPortAllowedTrainType This security object is set by the network manager to configure what type of device is permitted to connect to the port. One of the following values: allowEndNodesOnly - only non- …	Enumerationr/w Enumerated Values: 1 allowEndNodesOnly 2 allowPromiscuousEndNodes 3 allowEndNodesOrRepeaters 4 allowAnything	.1.3.6.1.2.1.53.1.1.3.1.1.7
vgRptrPortLastTrainConfig This object is a 16 bit field. For local ports, this object contains the requested configuration field from the most recent error-free training request frame sent by the device connected to the port. For cascade ports…	OctetString Constraints: range: 2-2	.1.3.6.1.2.1.53.1.1.3.1.1.8
vgRptrPortTrainingResult This 18 bit field is used to indicate the result of training. It contains two bits which indicate if error-free training frames have been received, and it also contains the 16 bits of the allowed configuration field fr…	OctetString Constraints: range: 3-3	.1.3.6.1.2.1.53.1.1.3.1.1.9
vgRptrPortPriorityEnable A configuration flag used to determine whether the repeater will service high priority requests received on the port as high priority or normal priority. When 'false', high priority requests on this port…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.53.1.1.3.1.1.10
vgRptrPortRptrInfoIndex This object identifies the repeater that this port is currently mapped to. The repeater identified by a particular value of this object is the same as that identified by the same value of vgRptrInfoIndex. A value of z…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.2.1.53.1.1.3.1.1.11

A table of performance and error statistics for
each repeater in the system.  The instance of the
vgRptrInfoLastChange associated with a repeater
is used to indicate possible discontinuities of
the counters in this table that are associated
with the same repeater.

vgRptrMonitorEntry row .1.3.6.1.2.1.53.1.2.1.1.1

An entry in the table, containing statistics
for a single repeater.

Indexes

vgRptrInfoIndex

Column	Syntax	OID
vgRptrMonTotalReadableFrames The total number of good frames of valid frame length that have been received on all ports in this repeater. If an implementation cannot obtain a count of frames as seen by the repeater itself, this counter may be impl…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.1.1.1.1
vgRptrMonTotalReadableOctets The total number of octets contained in good frames that have been received on all ports in this repeater. If an implementation cannot obtain a count of octets as seen by the repeater itself, this counte…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.1.1.1.2
vgRptrMonReadableOctetRollovers The total number of times that the associated instance of the vgRptrMonTotalReadableOctets counter has rolled over. This two-counter mechanism is provided for those network management protocols that do no…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.1.1.1.3
vgRptrMonHCTotalReadableOctets The total number of octets contained in good frames that have been received on all ports in this repeater. If an implementation cannot obtain a count of octets as seen by the repeater itself, this counter may be implem…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.53.1.2.1.1.1.4
vgRptrMonTotalErrors The total number of errors which have occurred on all of the ports in this repeater. If an implementation cannot obtain a count of these errors as seen by the repeater itself, this counter may be implemented as the sum…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.1.1.1.5

A table of performance and error statistics for
the ports.  The columnar object
vgRptrPortLastChange is used to indicate possible
discontinuities of counter type columnar objects
in this table.

vgRptrMonPortEntry row .1.3.6.1.2.1.53.1.2.3.1.1

An entry in the vgRptrMonPortTable, containing
performance and error statistics for a single
port.

Indexes

vgRptrGroupIndex vgRptrPortIndex

Column	Syntax	OID
vgRptrPortReadableFrames This object is the number of good frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on the port which is not counted by any of the following e…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.1
vgRptrPortReadableOctets This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.2
vgRptrPortReadOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortReadableOctets counter has rolled over. This two-counter mechanism is provided for those network management prot…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.3
vgRptrPortHCReadableOctets This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.53.1.2.3.1.1.4
vgRptrPortUnreadableOctets This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by vgRptr…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.5
vgRptrPortUnreadOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortUnreadableOctets counter has rolled over. This two-counter mechanism is provided for those network management pr…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.6
vgRptrPortHCUnreadableOctets This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by vgRptr…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.53.1.2.3.1.1.7
vgRptrPortHighPriorityFrames This object is a count of high priority frames that have been received on this port. This counter is incremented by one for each high priority frame received on this port. This counter includes both good and bad high …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.8
vgRptrPortHighPriorityOctets This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.9
vgRptrPortHighPriOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortHighPriorityOctets counter has rolled over. This two-counter mechanism is provided for those network management …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.10
vgRptrPortHCHighPriorityOctets This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.53.1.2.3.1.1.11
vgRptrPortNormPriorityFrames This object is a count of normal priority frames that have been received on this port. This counter is incremented by one for each normal priority frame received on this port. This counter includes both good and bad no…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.12
vgRptrPortNormPriorityOctets This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted b…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.13
vgRptrPortNormPriOctetRollovers This object is a count of the number of times that the associated instance of the vgRptrPortNormPriorityOctets counter has rolled over. This two-counter mechanism is provided for those network management …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.14
vgRptrPortHCNormPriorityOctets This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port whi…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.53.1.2.3.1.1.15
vgRptrPortBroadcastFrames This object is a count of broadcast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address is the broadcast address.…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.16
vgRptrPortMulticastFrames This object is a count of multicast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address has the group address bit…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.17
vgRptrPortNullAddressedFrames This object is a count of null addressed packets that have been received on this port. This counter is incremented by one for each frame received on this port with a destination MAC address consisting of all zero bits.…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.18
vgRptrPortIPMFrames This object is a count of the number of frames that have been received on this port with an invalid packet marker and no PMI errors. A repeater will write an invalid packet marker to the end of a frame containing error…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.19
vgRptrPortOversizeFrames This object is a count of oversize frames received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is larger than the maximum legal frame size. The …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.20
vgRptrPortDataErrorFrames This object is a count of errored frames received on this port. This counter is incremented by one for each frame received on this port with any of the following errors: bad FCS (with no IPM), PMI errors (excluding fra…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.21
vgRptrPortPriorityPromotions This counter is incremented by one each time the priority promotion timer has expired on this port and a normal priority frame is priority promoted. This counter may experience a discontinuity when the va…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.22
vgRptrPortTransitionToTrainings This counter is incremented by one each time the vgRptrPortStatus object for this port transitions into the 'training' state. This counter may experience a discontinuity when the value of the correspondin…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.2.3.1.1.23
vgRptrPortLastChange The value of sysUpTime when the last of the following occurred: 1) the agent cold- or warm-started; 2) the row for the port was created (such as when a device or module was added to the system); or 3) an…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.53.1.2.3.1.1.24

Table of address mapping information about the
ports.

vgRptrAddrTrackEntry row .1.3.6.1.2.1.53.1.3.3.1.1

An entry in the table, containing address mapping
information about a single port.

Indexes

vgRptrGroupIndex vgRptrPortIndex

Column	Syntax	OID
vgRptrAddrLastTrainedAddress This object is the MAC address of the last station which succeeded in training on this port. A cascaded repeater may train using the null address. If no stations have succeeded in training on this port since the agent …	OctetString Constraints: range: 0-0 range: 6-6	.1.3.6.1.2.1.53.1.3.3.1.1.1
vgRptrAddrTrainedAddrChanges This counter is incremented by one for each time that the vgRptrAddrLastTrainedAddress object for this port changes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.53.1.3.3.1.1.2
vgRptrRptrDetectedDupAddress This object is used to indicate that the repeater detected an error-free training frame on this port with a non-null source MAC address which matches the value of vgRptrAddrLastTrainedAddress of another active port in t…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.53.1.3.3.1.1.3
vgRptrMgrDetectedDupAddress This object can be set by a management station when it detects that there is a duplicate MAC address. This object is OR'd with vgRptrRptrDetectedDupAddress to form the value of the 'D' bit in training re…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.53.1.3.3.1.1.4