DOCS-IETF-SUBMGT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
14
.1.3.6.1.2.1.125.1.1 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk docsSubMgtCpeControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOCS-IETF-SUBMGT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOCS-IETF-SUBMGT-MIB::docsSubMgtCpeControlTable'
This table AUGMENTs the docsIfCmtsCmStatusTable, adding
four WRITEable objects, as well as a read-only object, all of
which reflect the state of subscriber management on a particular
CM.
docsSubMgtCpeControlEntry row .1.3.6.1.2.1.125.1.1.1
A row in the docsSubMgtCpeControlTable. All values are set
at successful modem registration, either from the system default,
or from objects included in the DOCSIS registration request sent
upstream to the CMTS from th…
Indexes
No indexes recorded
Column Syntax OID
The number of simultaneous IP addresses permitted behind
the CM. If this is set to zero, all CPE traffic from the CM is
dropped. If the provisioning object corresponding to
docsSubMgtCpeIpTable includes more CPE IP ad…
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.2.1.125.1.1.1.1
Controls the application of subscriber management to
this cable modem. If this is set to true, CMTS-based CPE
control is active, and all the actions required by the various
filter tables and controls apply at the CMTS.…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.125.1.1.1.2
Controls whether the CMTS may learn (and pass traffic
for) CPE IP addresses associated with a cable modem. If this is
set to true, the CMTS may learn up to docsSubMgtMaxCpeIp

addresses (less any DOCSIS-p…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.125.1.1.1.3
This object always returns false on read. If this object is
set to true, the rows with 'learned' addresses in
docsSubMgtCpeIpTable for this CM are deleted from that table.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.125.1.1.1.4
The value of sysUpTime when docsSubMgtCpeControlReset was
last set true. Zero if never reset.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.2.1.125.1.1.1.5
.1.3.6.1.2.1.125.1.5 · 1 row entry · 4 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk docsSubMgtCpeIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOCS-IETF-SUBMGT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOCS-IETF-SUBMGT-MIB::docsSubMgtCpeIpTable'
A table of CPE IP addresses known on a per-CM basis.
docsSubMgtCpeIpEntry row .1.3.6.1.2.1.125.1.5.1
An entry in the docsSubMgtCpeIpTable. The first index is
the specific modem we're referring to, and the second index is
the specific CPE IP entry.
Column Syntax OID
The index of this CPE IP address relative to the indexed CM.
An entry is created either through the included CPE IP addresses
in the provisioning object, or via learning.

If docsSubMgtCpeControlActive is …
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.2.1.125.1.5.1.1
The type of internet address of docsSubMgtCpeIpAddr.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.2.1.125.1.5.1.2
The IP address either set from provisioning or learned via
address gleaning or other forwarding means. See
docsSubMgtCpeIpIndex for the mechanism.

The type of this address is determined by the value of
d…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.2.1.125.1.5.1.3
If true, this entry was learned from IP packets sent
upstream rather than from the provisioning objects.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.125.1.5.1.4
.1.3.6.1.2.1.125.1.6 · 1 row entry · 4 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk docsSubMgtCmFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOCS-IETF-SUBMGT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOCS-IETF-SUBMGT-MIB::docsSubMgtCmFilterTable'
Binds filter groups to modems, identifying for each modem
the upstream and downstream filter groups that apply to packets
for that modem.  Normally, this table reflects the filter group
values signaled by DOCSIS Registration, although values may be
overridden by management action.
          
For each of the columns in this table, zero is a distinguished
value, indicating that the default filtering action is to be
taken rather than that associated with a filter group number.
Zero is used if the filter group is not signaled by DOCSIS
registration.
docsSubMgtCmFilterEntry row .1.3.6.1.2.1.125.1.6.1
Binds a filter group to each direction of traffic for a
modem. The filters in this entry apply if
docsSubMgtCpeControlActive is true.

The contents of this entry are meaningless unless the
corresponding doc…
Indexes
No indexes recorded
Column Syntax OID
The filter group applied to traffic destined for subscribers
attached to the referenced CM. Upon row creation, this is set
either to zero (use default classification, the
diffServClfrElementSpecific=zeroDotZero row of
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.2.1.125.1.6.1.1
The filter group applied to traffic originating from
subscribers attached to the referenced CM. Upon row creation
this is set to either zero (use default classification, the
diffServClfrElementSpecific=zeroDotZero row …
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.2.1.125.1.6.1.2
The filter group applied to traffic destined for the
referenced CM itself. Upon row creation this is set either to
zero (use default classification, the
diffServClfrElementSpecific=zeroDotZero row of
diffServClfrElemen…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.2.1.125.1.6.1.3
The filter group applied to traffic originating from the
referenced CM itself. This is set upon row creation to either

zero (use default classification, the
diffServClfrElementSpecific=zeroDotZero row of…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.2.1.125.1.6.1.4
.1.3.6.1.2.1.125.1.7 · 1 row entry · 1 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk docsSubMgtFilterGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOCS-IETF-SUBMGT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOCS-IETF-SUBMGT-MIB::docsSubMgtFilterGroupTable'
Provides a collection of referenceable entries to which
diffServClfrElementSpecific refers.  This table provides filter
group indices that can be compared with those signaled during
DOCSIS registration.  A packet matches an entry from this table
if the packet originated from or is destined to a cable modem
that registered this index as one of its four filter groups
(see docsSubMgtCmFilterTable), and if the packet direction and
MAC address select the use of this index among the four.
docsSubMgtFilterGroupEntry row .1.3.6.1.2.1.125.1.7.1
An entry only exists if needed by the
diffServClfrElementEntry. A packet matches this entry if the
packet's cable modem registered this index as one of its four
filter groups (see docsSubMgtCmFilterTable) and if the pa…
Column Syntax OID
The filter group index, from the set signaled at DOCSIS

Registration. Provides a referenceable entry to which
diffServClfrElementSpecific points. A packet matches this
classifier entry if the packet's c…
Integer32
Constraints:
range: 1-65535
.1.3.6.1.2.1.125.1.7.1.1