DNOS-SWITCHING-MIB Table View

Agent Trap Log

agentTrapLogEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1

Agent trap log entry

Indexes

No indexes recorded

Column	Syntax	OID
agentTrapLogIndex Unique index of trap entry	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.1
agentTrapLogSystemTime System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.2
agentTrapLogTrap Description of the trap sent.	OctetString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.3

Supported MIB table

agentSupportedMibEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1

Supported MIB entry

Indexes

No indexes recorded

Column	Syntax	OID
agentSupportedMibIndex Unique index of the Supported MIB entry	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.1
agentSupportedMibName The name of the MIB (RFC or IEEE) that is supported.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.2
agentSupportedMibDescription Description of the MIB (RFC or IEEE) that is supported.	OctetString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.3

A table of Task and cpu utilization.

agentSwitchCpuProcessEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1

Represents entry for a Task Table.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchCpuProcessIndex Unique index of process table	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.1
agentSwitchCpuProcessName Name of the process	RFC1213-MIBDisplayString Constraints: range: 0-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.2
agentSwitchCpuProcessPercentageUtilizationobsolete CPU utilization per task in Percentage over a period of 5, 60, 300 seconds, and the Rising threshold period also in seconds, if configured.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.3
agentSwitchCpuProcessPercentageUtilizationFive CPU utilization per task in percentage over a period of 5 seconds.	percentUnsigned32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.4
agentSwitchCpuProcessPercentageUtilizationSixty CPU utilization per task in percentage over a period of 60 seconds.	percentUnsigned32 Enumerated Values: 1 serial 2 telnet 3 ssh 4 http 5 https	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.5
agentSwitchCpuProcessPercentageUtilizationThreeHundred CPU utilization per task in percentage over a period of 300 seconds.	percentUnsigned32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.6
agentSwitchCpuProcessId Process ID	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.7

Table lists the number of packets dropped at each CoS queue for the CPU.

agentSwitchCpuCosQDropEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1

Packet drop statistics for a CPU CoS queue.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchCpuCosQIndex Unique index of a CPU CoS queue.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1.1
agentSwitchCpuCosQDrops Number of packets dropped at this CPU CoS queue because the queue was full.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1.2

Table lists information about message buffer allocation for packets arriving at the CPU.

agentSwitchMbufEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1

Information on a specific class of message buffers.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchMbufPrio Message buffer priority.	SNMPv2-SMIUnsigned32 Constraints: range: 1-64	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.1
agentSwitchMbufClassName Name of this class of message buffer.	RFC1213-MIBDisplayString Constraints: range: 0-128	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.2
agentSwitchMbufAllocAttempts Number of times the system tried to allocate a message buffer allocation of this class.	SNMPv2-SMICounter32 Enumerated Values: 1 read 2 write 3 suspended Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.3
agentSwitchMbufAllocFails Number of message buffer allocation failures for this class of message buffer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.4
agentSwitchMbufUsed Number of message buffer used for this class of message buffer.	SNMPv2-SMICounter32 Enumerated Values: 0 false 1 true Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.5

A table of the switch's login session

agentLoginSessionEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1

Login Session Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLoginSessionIndex Agent Login Session Index of the switch	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.1
agentLoginSessionUserName Agent Login Session UserName of the switch	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.2
agentLoginSessionIPAddressobsolete Agent Login Session IP Address of the switch	SNMPv2-SMIIpAddress Constraints: range: 0-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.3
agentLoginSessionConnectionType Agent Login Session Connection Type of the switch	Enumeration Constraints: range: 1-15	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.4
agentLoginSessionIdleTime Agent Login Session Idle Time of the switch	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.5
agentLoginSessionSessionTime Agent Login Session Time of the switch	SNMPv2-SMITimeTicks Enumerated Values: 1 enable 2 disable Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.6
agentLoginSessionStatus Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 enable 2 disable Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.7
agentLoginSessionInetAddressType Type of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login.	INET-ADDRESS-MIBInetAddressType Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.8
agentLoginSessionInetAddress Inet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.9

User Config Table

agentUserConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1

User Config Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentUserIndex Agent User Config Index	Integer32 Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.1
agentUserName Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).	OctetStringr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.2
agentUserPassword Agent User Password This object will return an empty string even if a password is set.	OctetStringr/w Constraints: range: 1-7	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.3
agentUserAccessModeobsolete Agent User Access Mode. This object is deprecated in favor of agentUserAccessLevel.	Enumerationr/w Enumerated Values: 1 access 2 trunk 3 general	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.4
agentUserStatus Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.	SNMPv2-TCRowStatusr/w Constraints: range: 1-8 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.5
agentUserLockoutStatus Displays whether the user account is locked due to excessive failed login attempts.	Enumeration Constraints: range: 1-4093	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.9
agentUserPasswordExpireTime Date and time when the user's password expires (past or present). Only valid when password aging is enabled.	SNMPv2-TCDateAndTime Constraints: range: 1-4093 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.10
agentUserAccessLevel Agent User Access Level. Supported values are 0, 1 and 15.	Integer32r/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.11
agentUserPasswordEncryptType User password encryption algorithm Type. md5(5) - MD5 aes(6) - AES - 128 md5Salt(7) - MD5 Salted Hash sha256(8) - SHA256 Salted Hash sha512(10) - SHA512 Salted Hash	Enumerationr/w Constraints: range: 0-63	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.12
agentUserPasswordEncrypted Specifies whether the password is encrypted or not.	Enumerationr/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.13
agentUserMfa Specifies Multifactor authentication state [enable/disable].	Enumerationr/w Constraints: range: 30-600	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.14
agentUserEmailId Specifies EmailId.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.15

Represents Password strength restricted keywords from the configurable password.

agentPasswordManagementStrengthExcludeKeywordEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1

Represents Password strength restricted keywords from the configurable password.

Indexes

No indexes recorded

Column	Syntax	OID
agentPasswordMgmtStrengthExcludeKeyword Specifies the given keyword string restricted from the configurable password.	RFC1213-MIBDisplayString Constraints: range: 0-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1.1
agentPasswordMgmtStrengthExcludeKeywordStatus Create the Exclude Keyword Index and configure (Create or Destroy) the keyword to it.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1.2

A table for dot1x Client details and associated functionality.

agentIASUserConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1

Represents entry for port config table.

Indexes

No indexes recorded

Column	Syntax	OID
agentIASUserIndex IAS user config index.	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.1
agentIASUserName IAS user name. This string is limited to alpha-numeric strings (including '-' and '_' characters).	OctetStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.2
agentIASUserPassword IAS user password.	OctetStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.3
agentIASUserStatus IAS User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.	SNMPv2-TCRowStatusr/w Constraints: range: 0-128 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.4

A summary table of the switch's LAG config entries

agentLagSummaryConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1

Switch's LAG config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLagSummaryLagIndex Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.1
agentLagSummaryName Agent LAG Name. The associated name of the LAG used during creation.	OctetStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.2
agentLagSummaryFlushTimerobsolete Agent LAG FlushTimer.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.3
agentLagSummaryLinkTrap Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.	Enumerationr/w Constraints: range: 0-128	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.4
agentLagSummaryAdminMode Agent LAG AdminMode. Administratively enables or disables this LAG interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.5
agentLagSummaryStpMode Agent LAG StpMode Administratively enables or disables STP on this interface.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.6
agentLagSummaryAddPort Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and t…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.7
agentLagSummaryDeletePort Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.8
agentLagSummaryStatus Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.	SNMPv2-TCRowStatusr/w Constraints: range: 0-0 range: 10-1000000 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.9
agentLagSummaryType Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.	Enumeration	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.10
agentLagSummaryStaticCapability Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.11
agentLagSummaryHashMode Agent LAG Hash Mode. This configures the hashing-mode for trunk port computation. The following are the possible values for hashing-mode. 1 - Source MAC, VLAN, EtherType, SourceModule and …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.12
agentLagSummarySwitchportMode	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.13
agentLagSummaryMinimumActiveLinks Agent LAG Threshold. This configures the threshold(i.e minimum number of active ports) value for trunk port .	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.14
agentLagSummaryAccessVlanID Describes and Configures the VLAN ID of access switch port. A value of 0 indicates that the switch port is not configured as access port.	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.15
agentLagSummaryNativeVlanID Describes and Configures the VLAN ID of access switch port. Configures the Native VLAN ID of the port.	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.16
agentLagSummaryLocalPreferenceMode Agent LAG Local Preference Mode. Enables or disables the LAG interface's Local Preference Mode.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.17
agentVpcId To configure the port-channel (LAG) as VPC. 0 - To unconfigure the VPC on the port-channel (or) port-channel is not configured as VPC.	Unsigned32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.18
agentLagSummaryPortCounter LAG port flap counter.	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.19
agentLagSummaryRateLoadInterval The length of time for which data is used to compute load statistics. The value is given in seconds, and must be a multiple of 30. The allowable range is 30 to 600 seconds.	Integer32r/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.20

A detailed table of the switch's LAG config entries

agentLagDetailedConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1

Switch's LAG config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLagDetailedLagIndex LAG index	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.1
agentLagDetailedIfIndex LAG port index	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.2
agentLagDetailedPortSpeed LAG port speed. See agentPortType for a description and list of valid values.	ObjectIdentifier Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.3
agentLagDetailedPortStatus LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.	Enumeration Constraints: range: 2-3600	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.4
agentLagDetailedPortCounter LAG port flap counter.	Integer32 Constraints: range: 1-25	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.5

The list of IPv6 address prefixes
for the network port.

agentNetworkIpv6AddrEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1

An interface entry containing objects of
a particular IPv6 address prefix

Indexes

No indexes recorded

Column	Syntax	OID
agentNetworkIpv6AddrPrefix The service port IPv6 Address Prefix	Ipv6AddressPrefix Enumerated Values: 0 disable 1 enable Type Constraints: range: 0..16	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.1
agentNetworkIpv6AddrPrefixLength The service port IPv6 Address Prefix Length	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.2
agentNetworkIpv6AddrEuiFlag The service port IPv6 Eui Flag	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.3
agentNetworkIpv6AddrStatus	SNMPv2-TCRowStatusr/w Enumerated Values: 0 disable 1 enable Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.3.14.1.4

The list of IPv6 address prefixes 
configured on the Service port.

agentServicePortIpv6AddrEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1

An interface entry containing objects of
a particular IPv6 address prefix

Indexes

agentSwitchMFDBVlanId agentSwitchMFDBMacAddress agentSwitchMFDBProtocolType

Column	Syntax	OID
agentServicePortIpv6AddrPrefix The IPv6 Address Prefix configured on the Servie port.	Ipv6AddressPrefixr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.1
agentServicePortIpv6AddrPrefixLength The IPv6 Address Prefix Length of the address configured on the Service port.	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.2
agentServicePortIpv6AddrEuiFlag The service port IPv6 Eui Flag	Enumerationr/w Enumerated Values: 1 static 2 gmrp 3 igmp 4 mld	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.3
agentServicePortIpv6AddrStatus	SNMPv2-TCRowStatusr/w Enumerated Values: 1 static 2 dynamic Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.4

The switch's address aging timeout table

agentSwitchAddressAgingTimeoutEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4.1

Aging information about a specific Filtering Database.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchAddressAgingTimeoutdeprecated The FDB entry's address aging timeout (in seconds).value '0' to disable Aging Timeout feature.	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4.1.1

The switch's static Mac filtering table

agentSwitchStaticMacFilteringEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1

Per-port ingress/egress filter configuration based on VLAN Id and MAC address.

Indexes

agentSwitchMFDBSummaryVlanId agentSwitchMFDBSummaryMacAddress

Column	Syntax	OID
agentSwitchStaticMacFilteringVlanId The Static MAC Filter Vlan Id	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.1
agentSwitchStaticMacFilteringAddress The Static MAC Filter MAC address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.2
agentSwitchStaticMacFilteringSourcePortMask The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this …	DELL-REF-MIBAgentPortMaskr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.3
agentSwitchStaticMacFilteringDestPortMask The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between …	DELL-REF-MIBAgentPortMaskr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.4
agentSwitchStaticMacFilteringStatus The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.5

A table of the IGMP/MLD Snooping Global configuration entries.

agentSwitchSnoopingCfgEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1

Represents entry for Snooping switch Configuration.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingProtocol The protocol type of network protocol in use.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.1
agentSwitchSnoopingAdminMode This enables or disables Snooping on the system.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.2
agentSwitchSnoopingPortMask IGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port…	DELL-REF-MIBAgentPortMaskr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.3
agentSwitchSnoopingMulticastControlFramesProcessed Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.	SNMPv2-SMICounter32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.4

A table of the IGMP/MLD Snooping Vlan configuration entries.

agentSwitchSnoopingVlanEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1

Represents entry for a IGMP/MLD Snooping Vlan.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingVlanAdminMode This enables or disables IGMP/MLD Snooping on a selected Vlan interface.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.1
agentSwitchSnoopingVlanGroupMembershipInterval The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than age…	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.2
agentSwitchSnoopingVlanMaxResponseTime The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less …	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.3
agentSwitchSnoopingVlanFastLeaveAdminMode This enables or disables IGMP/MLD Snooping on the selected vlan.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.4
agentSwitchSnoopingVlanMRPExpirationTime The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers att…	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.5
agentSwitchSnoopingVlanReportSuppMode This enables or disables IGMP/MLD Snooping Report Suppression feature on the selected vlan.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.6

A table of the IGMP/MLD Static Mrouter Configuration parameters.

agentSwitchVlanStaticMrouterEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1.1

Represents entry for a IGMP/MLD Static Mrouter.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchVlanStaticMrouterAdminMode This enables or disables IGMP/MLD Mrouter on a per-interface per-vlan basis.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1.1.1

The Multicast Forwarding Database table

agentSwitchMFDBEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1

Contains Forwarding and Filtering information per Vlan Index, MAC Address, and
Component User.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchMFDBVlanId Vlan Index for which this entry is associated with.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.1
agentSwitchMFDBMacAddress A multicast MAC address for which the switch has forwarding and or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.2
agentSwitchMFDBProtocolType The component that is responsible for this entry in the Multicast Forwarding Database.	Enumeration	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.3
agentSwitchMFDBType This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol	Enumeration	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.4
agentSwitchMFDBDescription Text description of this multicast table entry.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.5
agentSwitchMFDBForwardingPortMask BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTa…	DELL-REF-MIBAgentPortMask Type Constraints: range: 1..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.6
agentSwitchMFDBFilteringPortMask BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTab…	DELL-REF-MIBAgentPortMask Type Constraints: range: 1..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.7

The Multicast Forwarding Database Summary table

agentSwitchMFDBSummaryEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1

Summarizes the forwarding ports for all components registered for all
MFDB table entries with the same Vlan Index and MAC Address.

Indexes

agentSwitchSnoopingProtocol

Column	Syntax	OID
agentSwitchMFDBSummaryVlanId Vlan Index for which this entry is associated with.	Q-BRIDGE-MIBVlanIndex Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.1
agentSwitchMFDBSummaryMacAddress A multicast MAC address for which the switch has forwarding and or filtering information.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.2
agentSwitchMFDBSummaryForwardingPortMask Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfig…	DELL-REF-MIBAgentPortMask Type Constraints: range: 1..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.3

A table of entries specifying the ethertype (TPID) values.
This will let the user specify multiple ethertypes globally.

agentSwitchDVlanTagEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1

A table entry specifying the ethertype (TPID) values.
Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)
and dot1q tags (33024, or 0x8100).

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchDVlanTagTPid Ethertype value to identify incoming double tagged frames	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.1
agentSwitchDVlanTagPrimaryTPid Specifies if this TPID is primary TPID for the switch or not	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.2
agentSwitchDVlanTagRowStatus Row status	SNMPv2-TCRowStatusr/w Enumerated Values: 0 disable 1 enable Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.3

A table entries specifying the ethertype (TPID) values per port.

agentSwitchPortDVlanTagEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1

A table entry specifying the ethertype (TPID) value for a port.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchPortDVlanTagInterfaceIfIndex Port Id on to which the Ethertype value is mapped	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.1
agentSwitchPortDVlanTagTPid Ethertype value to identify incoming double tagged frames	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.2
agentSwitchPortDVlanTagMode Controls the Double Vlan Tag mode on this port.	Enumerationr/w Constraints: range: -1-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.3
agentSwitchPortDVlanTagCustomerId Configures the Customer ID for the Double Vlan Tag for this port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.4
agentSwitchPortDVlanTagRowStatus Row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.5

The switch's MAC To VLAN association table

agentSwitchVlanMacAssociationEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1

VLAN to be assigned to untagged or priority tagged
packets based on MAC address.

Indexes

agentSwitchVoiceVlanInterfaceNum agentSwitchVoiceVlanDeviceMacAddress

Column	Syntax	OID
agentSwitchVlanMacAssociationMacAddress The Mac address	SNMPv2-TCMacAddress Constraints: range: 1-65535 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.1
agentSwitchVlanMacAssociationVlanId The VLAN the Mac address assigned to	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.2
agentSwitchVlanMacAssociationRowStatus The Mac to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.3

The switch's protected port mapping table

agentSwitchProtectedPortEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1

Protected ports assigned to groups.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchProtectedPortGroupId The group that this port belongs to	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.1
agentSwitchProtectedPortGroupName The name of the group	OctetStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.2
agentSwitchProtectedPortPortList The set of ports that are protected in this group	ProtectedPortListr/w Constraints: range: 0-31	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.3

The switch's Subnet To VLAN association table

agentSwitchVlanSubnetAssociationEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1

VLAN to be assigned to untagged or priority tagged
packets based on IP address and Subnet Mask.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchVlanSubnetAssociationIPAddress The ip address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.1
agentSwitchVlanSubnetAssociationSubnetMask The subnet mask	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.2
agentSwitchVlanSubnetAssociationVlanId The VLAN that the IP address and subnet mask assigned to	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.3
agentSwitchVlanSubnetAssociationRowStatus The Subnet to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.4

A table of the IGMP/MLD Snooping Querier Global configuration entries.

agentSwitchSnoopingQuerierCfgEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1

Represents entry for Snooping Querier Configuration.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingQuerierAdminMode This enables or disables Snooping Querier on the system.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.1
agentSwitchSnoopingQuerierVersion This specifies the multicast protocol versions that are supported by the system.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.2
agentSwitchSnoopingQuerierAddress This specifies the default source ip address to be used while generating general queries.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.3
agentSwitchSnoopingQuerierQueryInterval This specified the timer interval after which the system generates general queries.	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.4
agentSwitchSnoopingQuerierExpiryInterval This specified the timer interval after which the detected other querier information is no longer valid.	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.5

A table of the Snooping Querier Vlan configuration entries.

agentSwitchSnoopingQuerierVlanEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1

Represents entry for a Snooping Querier configurable Vlan.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchSnoopingQuerierVlanAdminMode This enables or disables Snooping Querier on a selected Vlan interface.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.1
agentSwitchSnoopingQuerierVlanOperMode This specifies the current state of the Snooping Querier on a selected vlan interface	Enumeration	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.2
agentSwitchSnoopingQuerierElectionParticipateMode This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the specified vlan. When disabled…	Enumerationr/w Constraints: range: -1-300	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.3
agentSwitchSnoopingQuerierVlanAddress This specifies the default source ip address to be used while generating general queries on the specified vlan.	INET-ADDRESS-MIBInetAddressr/w Constraints: range: 1-15	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.4
agentSwitchSnoopingQuerierOperVersion This specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.5
agentSwitchSnoopingQuerierOperMaxResponseTime The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This object is valid onl…	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.6
agentSwitchSnoopingQuerierLastQuerierAddress This specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan.	INET-ADDRESS-MIBInetAddress Constraints: range: 1-31	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.7
agentSwitchSnoopingQuerierLastQuerierVersion This specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan. (-1) - indicates that parameter is not available.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.8

A table of the Voice Vlan device entries.

agentSwitchVoiceVlanDeviceEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1

Represents entry for a Voice Device on the interface.

Indexes

agentArpAclName agentArpAclRuleMatchSenderIpAddr agentArpAclRuleMatchSenderMacAddr

Column	Syntax	OID
agentSwitchVoiceVlanInterfaceNum The interface number of this interface.	Integer32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1.1
agentSwitchVoiceVlanDeviceMacAddress The Voice Device Mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1.2

A table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.

agentDaiVlanConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1

A row instance contains the configuration for Dynamic
ARP Inspection at each existing VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDaiVlanIndex This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.1
agentDaiVlanDynArpInspEnable This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic A…	SNMPv2-TCTruthValuer/w Constraints: range: 1-10 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.2
agentDaiVlanLoggingEnable This object indicates whether the Dynamic ARP Inspection logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspect…	SNMPv2-TCTruthValuer/w Constraints: range: 1-100 Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.3
agentDaiVlanArpAclName This object indicates the ARP ACL name set for this VLAN.	OctetStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.4
agentDaiVlanArpAclStaticFlag This object indicates whether the ARP ACL set for this VLAN has static flag set. If this object is set to 'true', static flag is enabled. If this object is set to 'false', static flag is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.5

A table containing Dynamic ARP Inspection statistics per VLAN.
When a VLAN is created in a device supporting this table,
and Dynamic ARP Inspection is enabled on that VLAN
a corresponding entry of this table will be added.

agentDaiVlanStatsEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1

A row instance contains the Dynamic ARP Inspection
statistics per VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDaiVlanStatsIndex This object indicates the VLAN number on which Dynamic ARP Inspection statistics are retrieved.	Q-BRIDGE-MIBVlanIndex Constraints: range: 1-100	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.1
agentDaiVlanPktsForwarded Number of valid ARP packets forwarded by DAI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.2
agentDaiVlanPktsDropped Number of invalid ARP packets dropped by DAI.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.3
agentDaiVlanDhcpDrops Number of ARP packets that were dropped by DAI as there is no matching DHCP Snooping binding entry found.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.4
agentDaiVlanDhcpPermits Number of ARP packets that were forwarded by DAI as there is a matching DHCP Snooping binding entry found.	SNMPv2-SMICounter32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.5
agentDaiVlanAclDrops Number of ARP packets that were dropped by DAI as there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.6
agentDaiVlanAclPermits Number of ARP packets that were permitted by DAI as there is a matching ARP ACL permit rule found for this Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.7
agentDaiVlanSrcMacFailures Number of ARP packets that were dropped by DAI as the sender mac address in ARP packet didn't match the source mac in ethernet header.	SNMPv2-SMICounter32 Enumerated Values: 1 permit 2 deny Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.8
agentDaiVlanDstMacFailures Number of ARP packets that were dropped by DAI as the target mac address in ARP reply packet didn't match the destination mac in ethernet header.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.9
agentDaiVlanIpValidFailures Number of ARP packets that were dropped by DAI as the sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255, IP multicast addresses, clas…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.10
agentDaiVlanAclDenials Number of ARP packets that were dropped by DAI as there is a matching ARP ACL deny rule found for this Vlan.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.11

A table provides the mechanism to configure the trust
state for Dynamic ARP Inspection purpose at each physical
interface capable of this feature.

agentDaiIfConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1

A row instance contains the configuration for
Dynamic ARP Inspection at each physical
interface capable of this feature.

Indexes

No indexes recorded

Column	Syntax	OID
agentDaiIfTrustEnable This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.1
agentDaiIfRateLimit This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutively burst interval seconds, ARP packets will be dropped. Valu…	packets per secondInteger32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.2
agentDaiIfBurstInterval This object indicates the burst interval value for rate limiting purpose on this interface.	Unsigned32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.3

A table of the ARP ACL entries

agentArpAclEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1

Represents entry for an ARP ACL

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclName Name of the ARP ACL, which must consist of 1 to 31 alphanumeric characters and uniquely identify this ARP ACL. This object must be set to complete a new ARP ACL row instance.	OctetStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1.1
agentArpAclRowStatus The status of this conceptual row. Entries can not be deleted until all rows in agentArpAclRuleConfigTable with corresponding values of agentArpAclName have been deleted. active(1) - …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1.2

A table of the ARP ACL Rule entries.
          
The functionality that was offered by this table is now
available through the agentArpAclRuleConfigTable, although
with different table indices. All SNMP client implementations
operating on this table MUST migrate to use the new table.

agentArpAclRuleEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1

Represents entry for a set of ARP ACL-match rules

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclRuleMatchSenderIpAddrobsolete Sender IP address match value for the ARP ACL.	SNMPv2-SMIIpAddressr/w Constraints: range: -1-300	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.1
agentArpAclRuleMatchSenderMacAddrobsolete Sender MAC address match value for the ARP ACL.	SNMPv2-TCMacAddressr/w Constraints: range: -1--1 range: 1-15 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.2
agentArpAclRuleRowStatusobsolete The status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.3

A table for configuration of ARP ACL remarks entries.
Created remarks will be associated with ARP ACL rule when
the rule is created.

agentArpAclRemarkConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1

The row in ARP ACL remarks configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclRemarkIndex Index of remark(not associated with a rule) instance within ARP ACL.	Unsigned32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1.1
agentArpAclRemarkStr ARP ACL remark(comment) string configuration. Each remark line is limited to 100 characters. Remark may consist of characters in the range A-Z, a-z, 0-9 and special characters like space, hyphen, underscore.	OctetStringr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1.2
agentArpAclRemarkStatus Status of this instance. active(1) - this remark is configured. createAndGo(4) - set to this value to create the remark entry. agentArpAclRemarkStr should be specified. destroy(6) …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.3.1.3

This table displays remarks which are associated with ARP ACL rules.
Each rule can be uniquely identified with ARP ACL name, IP and MAC addresses.
Each remark within each rule can be uniquely identified with remark index.
Remarks associated with the rule can't be edited in any way.
They can be deleted only.
          
The functionality that was offered by this table is now
available through the agentArpAclRemarkRuleConfigTable,
although with different table indices. All SNMP client
implementations operating on this table MUST migrate to
use the new table.

agentArpAclRemarkRuleEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1

Row of the ARP ACL rule remarks table.

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclRuleRemarkIndexobsolete The index of the remark instance within ARP ACL rule.	Unsigned32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1.1
agentArpAclRuleRemarkStrobsolete Displays the remark string for the specified ARP ACL rule.	OctetString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1.2
agentArpAclRuleRemarkStatusobsolete Status of this instance. active(1) - this remark is configured. destroy(6) - set to this value to delete the remark entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.4.1.3

A table of ARP ACL Rule entries

agentArpAclRuleConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1

Represents entry for a set of ARP ACL match criteria

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclRuleConfigIndex Sequence number of the rule within the ARP ACL. A value of 0 is special in that it is used to automatically assign the next higher available rule sequence number, after the last one in the given ARP ACL. …	Unsigned32	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.1
agentArpAclRuleConfigSenderIpAddr Sender IP address match value for the ARP ACL. A value of 0.0.0.0 indicates 'any-ipv4 address' matching.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.2
agentArpAclRuleConfigSenderMacAddr Sender MAC address match value for the ARP ACL. A value of 00:00:00:00:00:00 indicates 'any-mac' matching.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.3
agentArpAclRuleConfigAction Action to be taken when this rule is hit: permit(1) - ARP packet matching this rule is forwarded deny(2) - ARP packet matching this rule is dropped	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.4
agentArpAclRuleConfigStatus The status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.5.1.5

This table displays remarks which are associated with
ARP ACL rules.
          
Each ARP ACL rule is uniquely identified with ARP ACL name
and ARP ACL rule sequence number. Each remark within each
rule can be uniquely identified with remark index.
          
Entries in this table are autonomously created by the
system when a ARP ACL rule is created after creating one
or more remark entries in the agentArpAclRemarkConfigTable.
As entries are instantiated in this table, corresponding
entries are autonomously removed from the
agentArpAclRemarkConfigTable.
          
Entries in this table cannot be edited in any way. They
can only be deleted.

agentArpAclRemarkRuleConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1

Row in the ARP ACL rule remarks table.

Indexes

No indexes recorded

Column	Syntax	OID
agentArpAclRemarkRuleConfigIndex The index of this remark instance within a ARP ACL rule.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1.1
agentArpAclRemarkRuleConfigStr Displays the remark string for the specified ARP ACL rule.	OctetString	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1.2
agentArpAclRemarkRuleConfigStatus Status of this instance. active(1) - this remark is configured. destroy(6) - delete the remark entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.6.1.3

A table provides the mechanism to control DHCP SNOOPING
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.

agentDhcpSnoopingVlanConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1

A row instance contains the configuration for DHCP
SNOOPING at each existing VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpSnoopingVlanIndex This object indicates the VLAN number on which DHCP SNOOPING Inspection feature is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1.1
agentDhcpSnoopingVlanEnable This object indicates whether DHCP SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false', DHCP SNOOPING is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1.2

A table provides the mechanism to configure the trust
state for DHCP snooping purpose at each physical
interface capable of this feature.

agentDhcpSnoopingIfConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1

A row instance contains the configuration for
DHCP snooping at each physical interface capable of this feature.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpSnoopingIfTrustEnable This object indicates whether the interface is trusted for DHCP snooping purpose.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.1
agentDhcpSnoopingIfLogEnable This object indicates whether the Logging needs on DHCP snooping validations or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.2
agentDhcpSnoopingIfRateLimit This object indicates rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, DHCP packets will be dropped. Value of -1…	packets per secondInteger32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.3
agentDhcpSnoopingIfBurstInterval This object indicates the burst interval value for rate limiting purpose on this interface. Value of -1 indicates that there is no burst interval.	Integer32r/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.4

A table provides the mechanism to configure the IPSG
at each physical interface capable of this feature.

agentIpsgIfConfigEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1

A row instance contains the configuration for
IPSG at each physical interface capable of this feature.

Indexes

No indexes recorded

Column	Syntax	OID
agentIpsgIfVerifySource This object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source IP address to be a valid client address. Setting this variable to false automaticall…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1.1
agentIpsgIfPortSecurity This object indicates whether IP packets received on this interface are filtered based on whether IP Source Guard considers the source MAC address to be a valid client address. The port security option cannot be enabled…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1.2

A table provides the mechanism for statics of DHCP snooping.

agentDhcpSnoopingStatsEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1

A row instance contains the DHCP snooping statistics per VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpSnoopingMacVerifyFailures This object indicates the number of failure verifications of client mac address with source mac address	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.1
agentDhcpSnoopingInvalidClientMessages This object indicates the number of invalid DHCP releases and denay messages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.2
agentDhcpSnoopingInvalidServerMessages This object indicates the number of invalid DHCP server mesaages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.3

A table of the IPSG static entries

agentStaticIpsgBindingEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1

Represents a binding in IPSG table

Indexes

No indexes recorded

Column	Syntax	OID
agentStaticIpsgBindingIfIndex Interface on which this IPSG binding is going to be added.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.1
agentStaticIpsgBindingVlanId VLAN to whcig this IPSG binding is going to be added.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.2
agentStaticIpsgBindingIpAddr IP address match value for the IPSG Binding.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.3
agentStaticIpsgBindingMacAddr MAC address match value for the IPSG Binding.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.4
agentStaticIpsgBindingRowStatus The status of this conceptual row. active(1) - this IPSG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Enumerated Values: 1 primary 2 isolated 3 community 4 unconfigured Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.5

A table of the IPSG dynamic entries

agentDynamicIpsgBindingEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1

Represents a binding in IPSG table

Indexes

No indexes recorded

Column	Syntax	OID
agentDynamicIpsgBindingIfIndex Interface on which this IPSG binding is added.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.1
agentDynamicIpsgBindingVlanId VLAN to whcig this IPSG binding is going to be added.	Q-BRIDGE-MIBVlanIndex Constraints: range: 1-4093	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.2
agentDynamicIpsgBindingIpAddr Sender IP address match value for the IPSG Binding.	SNMPv2-SMIIpAddress Constraints: range: 1-4093	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.3
agentDynamicIpsgBindingMacAddr MAC address match value for the IPSG Binding.	SNMPv2-TCMacAddress Constraints: range: 1-4093 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.4

A table of the DHCP SNOOPING static entries

agentStaticDsBindingEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1

Represents a binding in DHCP SNOOPING table

Indexes

No indexes recorded

Column	Syntax	OID
agentStaticDsBindingIfIndex Interface on which this DHCP SNOOPING binding is going to be added.	IF-MIBInterfaceIndexr/w Constraints: range: 1-4093 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.1
agentStaticDsBindingVlanId VLAN to which this DHCP SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.2
agentStaticDsBindingMacAddr MAC address match value for the DHCP SNOOPING Binding.	SNMPv2-TCMacAddressr/w Constraints: range: 1-4093 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.3
agentStaticDsBindingIpAddr IP address match value for the DHCP SNOOPING Binding.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.4
agentStaticDsBindingRowStatus The status of this conceptual row. active(1) - this DHCP SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Constraints: range: 1-4093 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.5

A table of the DHCP SNOOPING Dynamic entries

agentDynamicDsBindingEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1

Represents a binding in DHCP SNOOPING table

Indexes

No indexes recorded

Column	Syntax	OID
agentDynamicDsBindingIfIndex Interface on which this DHCP SNOOPING binding is going to be added.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.1
agentDynamicDsBindingVlanId VLAN to whcig this DHCP SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.2
agentDynamicDsBindingMacAddr MAC address match value for the DHCP SNOOPING Binding.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.3
agentDynamicDsBindingIpAddr IP address match value for the DHCP SNOOPING Binding.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.4
agentDynamicDsBindingLeaseRemainingTime This specifies the period for which the DHCP SNOOPING Binding is valid.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.5

Displays Switch Database Management Template Information.

agentSdmTemplateEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1

Information about a SDM Template table entry.

Indexes

No indexes recorded

Column	Syntax	OID
agentSdmTemplateId The SDM Template type this instance is associated with.	Enumeration	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.1
agentArpEntries The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces.	SNMPv2-SMIInteger32 Constraints: range: 1-128	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.2
agentIPv4UnicastRoutes The maximum number of IPv4 unicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.3
agentIPv6NdpEntries The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.4
agentIPv6UnicastRoutes The maximum number of IPv6 unicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.5
agentEcmpNextHops The maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.6
agentIPv4MulticastRoutes The maximum number of IPv4 multicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.7
agentIPv6MulticastRoutes The maximum number of IPv6 multicast forwarding table entries.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.8