DNOS-METRO-DOT1AG-PRIVATE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

agentDot1agMipTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.2.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk agentDot1agMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-METRO-DOT1AG-PRIVATE-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-METRO-DOT1AG-PRIVATE-MIB::agentDot1agMipTable' 
A table entries specifying the Dot1ag CFM MIP Details
agentDot1agMipEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.2.1.1.1
Represents a Dot1ag MIP Table.
Indexes
Column Syntax OID
agentDot1agMipMdIndex
The index of the Maintenance Domain in the
agentDot1agMipTable to which the MP is associated.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.2.1.1.1.1
agentDot1agMipIfIndex
Dot1ag CFM MIP Interface Index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.2.1.1.1.2
agentDot1agMipMode
Enable or Disable MIP CFM Mode.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.2.1.1.1.3

agentDot1agRMepTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk agentDot1agRMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-METRO-DOT1AG-PRIVATE-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-METRO-DOT1AG-PRIVATE-MIB::agentDot1agRMepTable' 
A table to configure the Dot1ag CFM Remote MEP entries
agentDot1agRMepEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1
Represents a Dot1ag Remote MEP Table.
Indexes
Column Syntax OID
agentDot1agRMepMdIndex
The index of the Maintenance Domain in the agentDot1agRMepTable
to which the Remote MEP is associated.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1.1
agentDot1agRMepMaIndex
The index of the Maintenance Association in the
agentDot1agRMepTable to which the Remote MEP is associated.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1.2
agentDot1agRMepMepIdIndex
The index of the Maintenance End point in the
agentDot1agRMepTable to which the Remote MEP is associated.
Unsigned32
Constraints:
range: 0-8191
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1.3
agentDot1agRMepIdentifier
The index of the Remote Maintenance End point in the
agentDot1agRMepTable.
Unsigned32r/w
Constraints:
range: 0-8191
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1.4
agentDot1agRMepIfIndex
Interface Index in the agentDot1agRMepTable
to which Remote MEP is associated
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1.5
agentDot1agRMepMacAddress
The MAC address of the remote MEP in the agentDot1agRMepTable
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1.6
agentDot1agRMepRowStatus
The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.3.1.1.1.7