DNOS-IPV6-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
11

agentTunnelIPV6Table

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1 · 1 row entry · 8 columns
Open in standard view 
A summary table of the IPV6 tunnel instances
agentTunnelIPV6Entry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1
Indexes
agentTunnelID
Column Syntax OID
agentTunnelID
The tunnel ID is associated with Internal Interface number
which is generated when we create a tunnel, and is used
to configure the tunnel.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.1
agentTunnelIfIndex
The external interface of the tunnel is associted with
internal interface. The tunnel ID associated with
Internal Interface number is generated when we create a
tunnel, which is used to configure the tunnel.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.2
agentTunnelMode
Specifies the type of Tunnel either undefined, 6over4 or 6to4.
The default value is undefined. It supports 6over4
which supports an assigned IPV6 address, an IPV4 address
is not allowed. For this mode, the tunnel source…
Enumerationr/w
Enumerated Values:
1undefined
2ip6over4
3ip6to4
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.3
agentTunnelLocalIP4Addr
The address of the Local endpoint of the tunnel i.e. the
source address used in the outer IP header. It is 0.0.0.0
if unknown or the tunnel is over IPv6.
INET-ADDRESS-MIBInetAddressIPv4r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv4 OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.4
agentTunnelRemoteIP4Addr
The address of the Remote endpoint of the tunnel i.e.
the destination address used in the outer IP header. It is
0.0.0.0 if the tunnel is unknown or IPv6 address, or not
a point to point link
INET-ADDRESS-MIBInetAddressIPv4r/w
Textual Convention: INET-ADDRESS-MIBInetAddressIPv4 OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.5
agentTunnelLocalIfIndex
Specifies the interface for IPv6 Tunnel Source
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.6
agentTunnelStatus
Status of this instance.Row can be added or deleted
by setting the value to createAndGo/destroy

active(1) - this Tunnel instance is active
createAndGo(4) - set to this value to create an instance
des…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.7
agentTunnelIcmpUnreachableMode
Specifies the Mode of Sending ICMPv6 Unreachable
messages on this tunnel interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.1.1.8

agentTunnelIPV6PrefixTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.2 · 1 row entry · 3 columns
Open in standard view 
A table of the IPV6 prefixes associated with tunnel instances
agentTunnelIPV6PrefixEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.2.1
Indexes
agentTunnelID agentTunnelIPV6PrefixPrefix agentTunnelIPV6PrefixPrefixLen
Column Syntax OID
agentTunnelIPV6PrefixPrefix
The prefix associated with the tunnel interface. The data type
is used to model the IPV6 address. It is a binary string
of 16 octects in network byte-order. It specifies the IP
address of tunnel which will be in IPV6 F…
IPV6-TCIpv6AddressPrefix
Textual Convention: IPV6-TCIpv6AddressPrefix OctetString
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.2.1.1
agentTunnelIPV6PrefixPrefixLen
The length of the prefix (in bits).
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.2.1.2
agentTunnelIPV6PrefixStatus
Status of this instance.Row can be added or deleted
by setting the value to createAndGo/destroy

active(1) - this Tunnel instance is active
createAndGo(4) - set to this value to create an instance
de…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.27.1.2.1.3