DNOS-DCBX-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
19
agentDcbxTable
table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1
·
1 row entry
·
5 columns
Uses the dell variant from
Command help
/opt/observium/mibs/dell.
Walk agentDcbxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-DCBX-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-DCBX-MIB::agentDcbxTable'
A table providing configuration of DCBX per interface.
DCBX configuration for a port.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This is a unique index for an entry in the
agentDcbxTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. |
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.1 |
||||||||
|
Ports operating in the manual role do not have their
configuration affected by peer devices or by internal propagation of configuration. These ports will advertise their configuration to their peer if DCBX is enabled… |
DcbxPortRoler/w Type Values:
|
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.2 |
||||||||
|
agentDcbxVersiondeprecated
CIN is Cisco Intel Nuova DCBX (version 1.0).
CEE is converged enhanced ethernet DCBX (version 1.06). IEEE is 802-1 az version. The default value is auto. DCBX supports the legacy implementations v1.0 (C… |
DcbxVersionr/w Type Values:
|
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.3 |
||||||||
|
Bitmap that includes the supported set of DCBX LLDP
TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Having the bit 'pfc(0)' set indicates tha… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.4 |
||||||||
|
Bitmap that includes the DCBX defined set of LLDP
TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Having the bit 'pfc(0)' set indicates that … |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.5 |
agentDcbxStatusTable
table.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2
·
1 row entry
·
14 columns
Uses the dell variant from
Command help
/opt/observium/mibs/dell.
Walk agentDcbxStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-DCBX-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-DCBX-MIB::agentDcbxStatusTable'
.
.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Specifies the DCBX mode in which the interface is currently operating.
|
DcbxVersion Type Values:
|
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.2 |
||||||||
|
MAC Address of the DCBX peer.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.3 |
||||||||
|
Indicates if this port is the source of configuration information
for auto-* ports. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.4 |
||||||||
|
Indicates number of times multiple peers were detected.
A duplicate peer is when more than one DCBX peer is detected on a port. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.5 |
||||||||
|
.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.6 |
||||||||
|
Specifies the operational version of the peer DCBX device.
Valid only when peer device is a CEE/CIN DCBX device. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.7 |
||||||||
|
Specifies the max version of the peer DCBX device.
Valid only when peer device is CEE/CIN DCBX device. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.8 |
||||||||
|
Specifies the current sequence number that is sent
in DCBX control TLVs in CEE/CIN Mode. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.9 |
||||||||
|
Specifies the current ACK number that is to be sent
to peer in DCBX control TLVs in CEE/CIN Mode. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.10 |
||||||||
|
Specifies the current ACK number that is sent by peer
in DCBX control TLV in CEE/CIN Mode. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.11 |
||||||||
|
The number of DCBX frames transmitted per interface.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.12 |
||||||||
|
The number of DCBX frames received per interface.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.13 |
||||||||
|
The number of DCBX frames discarded due to errors in the frame.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.14 |
||||||||
|
The number of DCBX
(PFC, ETS, Application Priority or other) TLVs not recognized. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.15 |