DMOS-HW-MONITOR-NOTIFICATIONS-MIB

        This MIB file constains the definition of DmOS notifications related to the hardware monitoring.
    
Source file
DMOS-HW-MONITOR-NOTIFICATIONS-MIB
Last revised
Identity
dmosHwMonNotificationsMIB
Base OID
1.3.6.1.4.1.3709.3.6.3.3.2
Imported Objects
DMOS-NOTIFICATIONS-MIB alarmNotifications notificationAlarmState notificationInfo notificationName notificationSeverity notificationSourceType notificationSourceValue notificationTime
SNMPv2-CONF NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the datacom MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DMOS-HW-MONITOR-NOTIFICATIONS-MIB' -M '/opt/observium/mibs/datacom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DMOS-HW-MONITOR-NOTIFICATIONS-MIB::dmosHwMonNotificationsMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DMOS-HW-MONITOR-NOTIFICATIONS-MIB' -M '/opt/observium/mibs/datacom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DMOS-HW-MONITOR-NOTIFICATIONS-MIB::dmosHwMonNotificationsMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (5)
.1.3.6.1.4.1.3709.3.6.3.3.2
.1.3.6.1.4.1.3709.3.6.3.3.2.1
.1.3.6.1.4.1.3709.3.6.3.3.2.1.1
.1.3.6.1.4.1.3709.3.6.3.3.2.1.2
.1.3.6.1.4.1.3709.3.6.3.3.2.2
Dependencies (5) 3 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. DATACOM-SMIdatacom
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. DMOS-NOTIFICATIONS-MIBdatacom
  6. DMOS-HW-MONITOR-NOTIFICATIONS-MIBdatacomselected
Conformance Groups (3)
A set of objects that provides more information about hardware monitoring alarms.
.1.3.6.1.4.1.3709.3.6.3.3.2.2.1
Traps generated by fan alarms.
.1.3.6.1.4.1.3709.3.6.3.3.2.2.2
Traps generated by temperature alarms.
.1.3.6.1.4.1.3709.3.6.3.3.2.2.3
Notifications / Traps (8)
NameOIDDescription
.1.3.6.1.4.1.3709.3.6.3.3.2.10
Alarm for critical temperature of the device.
.1.3.6.1.4.1.3709.3.6.3.3.2.3
Alarm for fan speed above the safe rpm speed.
.1.3.6.1.4.1.3709.3.6.3.3.2.4
Alarm for fan speed below the safe rpm speed.
.1.3.6.1.4.1.3709.3.6.3.3.2.5
Alarm for fan in a fail condition. The fan must be checked.
.1.3.6.1.4.1.3709.3.6.3.3.2.6
Alarm to report that an error happened on fan status reading.
.1.3.6.1.4.1.3709.3.6.3.3.2.7
Alarm for high temperature of the device.
.1.3.6.1.4.1.3709.3.6.3.3.2.8
Alarm for low temperature of the device.
.1.3.6.1.4.1.3709.3.6.3.3.2.9
It was not possible to read the temperature sensor.