DLM-MIB Table View

A list of SNMP poll entries which trigger automatic polling
of SNMP requests to other SNMP agents.  This table is indexed 
by the destination IP address of the host/device to be polled
and the IP address of the requesting host.  This indexing pair 
allows multiple requestors to define a poll request to the same 
destination, yet maintain separate poll entries.
          
The OIDs to be polled in this request are defined in the 
snmpOIDTable which is indexed also by the destination/owner
IP address pair.  If no OIDs are defined for a poll entry, then
the the poll will default to polling for sysUpTimei with no
threshold comparison.  This will act as a simple keep-alive
funtion for the destination SNMP agent.

snmpPollEntry row .1.3.6.1.4.1.52.4.2.1.1.1

An SNMP poll entry containing objects for a particular poll
request.

Indexes

snmpPollDestination snmpPollOwner

Column	Syntax	OID
snmpPollDestinationmandatory The IP address of the host/device to be polled.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.1.1.1.1
snmpPollOwnermandatory The IP address of the client which created this poll request entry.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.1.1.1.2
snmpPollCommunitymandatory The value of the community string to be used in the SNMP REQUEST PDU when actively polling. Note that this community name string should be defined for the Cabletron hub device as well as in the destination host/device…	OctetStringr/w	.1.3.6.1.4.1.52.4.2.1.1.1.3
snmpPollIntervalmandatory The value of the interval (in seconds) on which to poll the destination address with the OIDs defined in the OID table assigned to this poll entry. This interval defines how often an SNMP GET REQUEST PDU will be ori…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.1.1.1.4
snmpPollRetrymandatory The value of the number of times to retry a failed poll request prior to considering it a failure.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.1.1.1.5
snmpPollActionmandatory The indication of the action to take when a poll request is considered to have failed. A value of 'no-action' will allow the poll to reset and retry without sending any alarms. A value of 'send-trap' will cause a SN…	Enumerationr/w Enumerated Values: 1 no-action 2 send-trap	.1.3.6.1.4.1.52.4.2.1.1.1.6
snmpPollTrapAddressmandatory The IP address to which to send the SNMP TRAP if the poll is considered a failure and the action is defined as send-trap. The default trap address is the owner address for this entry.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.1.1.1.7
snmpPollTypemandatory The administrative control of this poll request entry. This leaf is used to trigure an active request (begin polling), suspend polling (stop polling but leave this poll entry intact) on an active request, or to del…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 activate 4 suspend	.1.3.6.1.4.1.52.4.2.1.1.1.8
snmpPollStatusmandatory The operational status of this poll request entry. This leaf is used to indicate the state of the last valid poll request.	Enumeration Enumerated Values: 1 inactive 2 active 3 lost-contact 4 alarm-condition 5 general-failure	.1.3.6.1.4.1.52.4.2.1.1.1.9
snmpPollRequestsmandatory Indicates the number of poll requests (SNMP GET REQUEST PDUs) have been issued for this poll entry.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.1.1.1.10
snmpPollLastContactmandatory Indicates the value of the sysUpTime when the last poll response was received from the polled host/device for which this poll entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.1.1.1.11
snmpPollLastAlarmmandatory Indicates the value of the sysUpTime when the last alarm was generated for this poll request entry.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.1.1.1.12
snmpPollAlarmWaitmandatory Indicates the number of seconds to wait prior to sending another alarm. This is to ensure that alarms do not flood out upon device contact lost.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.1.1.1.13
snmpPollTrapCommunitymandatory The value of the community string to be used in the SNMP TRAP PDU when a trap is generated.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.1.1.1.14
snmpPollProtocolmandatory Indicates the protocol to use to poll the host/device. If snmp is chosen, there must be at least one corresponding OID Table Entry or a general-failure will result. A corresponding OID Table Entry is an entry with the…	Enumerationr/w Enumerated Values: 1 internet-ping 2 snmp	.1.3.6.1.4.1.52.4.2.1.1.1.15

A list of objects used to define the OBJECT IDENTIFIERS and  
their attributes (type and threashold values) to be used in
a particular snmp poll request SNMP GET REQUEST PDU.  These
OIDs will make up the VarBindList in the PDU.  Only OID types
which have INTEGER samantics are supported (INTEGER, Counter,
Gauge, TimeTicks) since the polled value is compared against
a threshold value.
          
This table is addresses by the same keys as the snmpPollTable
(destination IP address and owner Ip address) in addition to 
a unique OID sequence number which is maintained for each 
OID entry.

snmpOIDEntry row .1.3.6.1.4.1.52.4.2.1.2.1

An SNMP poll OBJECT IDENTIFIER entry containing objects for a
particular OID to be polled.

Indexes

snmpOIDDestination snmpOIDOwner snmpOIDSequence

Column	Syntax	OID
snmpOIDDestinationmandatory The IP address of the host/device to be polled.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.1.2.1.1
snmpOIDOwnermandatory The IP address of the client which created this OID request entry.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.1.2.1.2
snmpOIDSequencemandatory The sequence number which uniquely idenifies this OID entry entry within a particular SNMP poll request. This number is incremented each time an OID as added to the poll list for a particular destination/owner pair.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.1.2.1.3
snmpOIDObjectmandatory Identifies the Object Identifier to be polled. This OID value will be placed in a SNMP GET REQUEST PDU on each poll interval.	ObjectIdentifierr/w	.1.3.6.1.4.1.52.4.2.1.2.1.4
snmpOIDComparatormandatory Indicates the type of comparison to be performed on the value portion of the OID being polled. This comparator will be used to compare the OID value with the threshold value defined in this entry. A value of 'dont-c…	Enumerationr/w Enumerated Values: 1 equal 2 greater 3 less 4 greater-or-equal 5 less-or-equal 6 trap-always 7 dont-compare 8 not-equal	.1.3.6.1.4.1.52.4.2.1.2.1.5
snmpOIDEnumTypemandatory Indicates the type of value to expect from the OID being polled such that the correct interpretation of the threshold value can be used to do the comparison.	Enumerationr/w Enumerated Values: 1 integer 2 counter 3 gauge 4 ticks	.1.3.6.1.4.1.52.4.2.1.2.1.6
snmpOIDThresholdIntegermandatory The threshold value to be used when polling an integer-valued Object Identifier.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.1.2.1.7
snmpOIDThresholdCountermandatory The threshold value to be used when polling a Counter-type Object Identifier.	RFC1155-SMICounterr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.1.2.1.8
snmpOIDThresholdGaugemandatory The threshold value to be used when polling a Gauge-type Object Identifier.	RFC1155-SMIGauger/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.1.2.1.9
snmpOIDThresholdTicksmandatory The threshold value to be used when polling a TimeTicks-type Object Identifier.	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.1.2.1.10
snmpOIDTypemandatory The administrative control of this Object Identifier entry. This leaf is used to control adding, using, and deleting OIDs from the OID poll list.	Enumerationr/w Enumerated Values: 1 other 2 inactive 3 activate 4 suspend	.1.3.6.1.4.1.52.4.2.1.2.1.11
snmpOIDStatusmandatory The status of the last poll of this Object ID.	Enumeration Enumerated Values: 1 inactive 2 active 3 alarm-condition	.1.3.6.1.4.1.52.4.2.1.2.1.12
snmpOIDLastValuemandatory The value of the last poll entry treated as an integer value. This field is used to allow RMON alarms to monitor the polled values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.1.2.1.13