DLINK-3100-QOS-CLI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
37
Rows
37
Columns
231

rlQosOffsetTable

table deprecated
.1.3.6.1.4.1.171.10.94.89.89.88.4 · 1 row entry · 7 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosOffsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosOffsetTable'
This table specifies Offset Table information
rlQosOffsetEntry row .1.3.6.1.4.1.171.10.94.89.89.88.4.1
Each entry in this table describes one classifier field.
The information includes: Offset Type the offset the mask and the
Pattern.
if the type is vlan then the value will be the vlan tag.
if the Type is in/out port it …
Column Syntax OID
An arbitrary incremental Index
for the offset table.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.4.1.1
rlQosOffsetTypedeprecated
Start of the offset.
ClassOffsetTyper/w
Type Values:
1packetStart
2layer2-start
3mpls-start
4layer3-start
5layer4-start
6layer5-start
7vlan
8in-port
9out-port
10vpt
11ethertype
12inner-vlan
13layer3-ipv6-start
.1.3.6.1.4.1.171.10.94.89.89.88.4.1.2
The Offset value.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.4.1.3
rlQosOffsetMaskdeprecated
Define which bit to be extracted from the offset.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.171.10.94.89.89.88.4.1.4
The value to match too.Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.171.10.94.89.89.88.4.1.5
Pointer for the relevant Tuple.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.4.1.6
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.4.1.7
.1.3.6.1.4.1.171.10.94.89.89.88.5 · 1 row entry · 5 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosTupleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosTupleTable'
This table specifies Tuple Table information
rlQosTupleEntry row .1.3.6.1.4.1.171.10.94.89.89.88.5.1
Each entry in this table describes one Tuple.
The information includes: Tuple Type and the Tuples values.
The index is sequential integer represent by rlQosTupleIndex
Indexes
Column Syntax OID
rlQosTupleIndexAn arbitrary incremental Index
for the offset table.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.5.1.1
rlQosTupleTypeStart of the offset.ClassTupleTyper/w
Type Values:
1protocol
2ip-src
3ip-dest
4dscp
5ip-precedence
6udp-port-src
7udp-port-dest
8tcp-port-src
9tcp-port-dest
10mac-src
11mac-dest
12vlan
13in-port
14out-port
15general
16vpt
17ether-type
18tcp-flags
19icmp-type
20icmp-code
21igmp-type
22inner-vlan
23ipv6-src
24ipv6-dest
.1.3.6.1.4.1.171.10.94.89.89.88.5.1.2
rlQosTupleValue1The Tuple no.1 value can be regular integer
values only.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.5.1.3
rlQosTupleValue2The Tuple no.2 value can be IPv4/IPv6/MAC address
or protocol number with mask
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.5.1.4
rlQosTupleStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.5.1.5
.1.3.6.1.4.1.171.10.94.89.89.88.6 · 1 row entry · 13 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosAceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosAceTable'
This table specifies ACE table information
rlQosAceEntry row .1.3.6.1.4.1.171.10.94.89.89.88.6.1
Each entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 8 tuples
pointers. The index is sequential integer represent by rlQosAceIndex
Indexes
Column Syntax OID
rlQosAceIndexAn arbitrary incremental Index
for the ACE table.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.1
rlQosAceActionACE Action to take.AceActionTyper/w
Type Values:
1permit
2deny
3deny-DisablePort
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.2
rlQosAceTypeACE TypeAceObjectTyper/w
Type Values:
1ip
2ip-TCP
3ip-UDP
4ip-Offset
5mac
6mac-Offset
7ip-ICMP
8ip-IGMP
9ipv6
10ipv6-TCP
11ipv6-UDP
12ipv6-Offset
13ipv6-ICMP
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.3
rlQosAceTuple1ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.4
rlQosAceTuple2ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.5
rlQosAceTuple3ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.6
rlQosAceTuple4ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.7
rlQosAceTuple5ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.8
rlQosAceTuple6ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.9
rlQosAceTuple7ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.10
rlQosAceTuple8ACE Tuple 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.11
rlQosAceAccountACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.
For Broadcom ASICs this counter shows number of
matched with ACE criteria packets.
For Dlink ASICs TBD.
BinaryStatusr/w
Type Values:
1disable
2enable
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.12
rlQosAceStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.6.1.13
.1.3.6.1.4.1.171.10.94.89.89.88.7 · 1 row entry · 4 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosAclTable'
This table specifies ACL table information
rlQosAclEntry row .1.3.6.1.4.1.171.10.94.89.89.88.7.1
Each entry in this table describes one Classifier Element.
The information includes: Action and the row status. The ACE pointer
are in the ACL-ACE reference table.
The index is sequential integer represent by rlQosAceIn…
Indexes
Column Syntax OID
rlQosAclIndexAn arbitrary incremental Index
for the ACE table.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.7.1.1
rlQosAclNameName ACL.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.7.1.2
rlQosAclTypeACL Type.AclObjectTyper/w
Type Values:
1mac
2ip
3ipv6
.1.3.6.1.4.1.171.10.94.89.89.88.7.1.3
rlQosAclStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.7.1.4
.1.3.6.1.4.1.171.10.94.89.89.88.8 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosAclAceRefTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosAclAceRefTable'
This table specifies the ACE to ACL
relationship.
rlQosAclAceRefEntry row .1.3.6.1.4.1.171.10.94.89.89.88.8.1
Each entry in this table describes the relationship
between ACE to ACL. Show which ACE include in one ACL.
The index is the ACE pointer represent
by rlQosAclAceRefAcePointer
Column Syntax OID
rlQosAclAceRefAcePointerThe Index is the ACE pointerInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.8.1.1
rlQosAclAceRefAclPointerACL index PointerInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.8.1.2
rlQosAclAceRefStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.8.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.9 · 1 row entry · 14 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosClassMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosClassMapTable'
This table specifies CCL table information
rlQosClassMapEntry row .1.3.6.1.4.1.171.10.94.89.89.88.9.1
Each entry in this table describes one Class Map Element.
The information includes: Classes Name,Class Action,
Policer pointer, and 1 match statements.
The index is sequential integer represent by rlQosClassMapIndex
Column Syntax OID
rlQosClassMapIndexClass Map IndexInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.1
rlQosClassMapNameName of the Class Map.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.2
rlQosClassMapTypeClass map typeClassMapTyper/w
Type Values:
1matchAll
2matchAny
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.3
rlQosClassMapActionClass Map Action.ClassMapActionr/w
Type Values:
1none
2setIP-Precedence
3setDSCP
4setQueue
5setCos
6trustCos
7trustDSCP
8trustTCP-UDPport
9trustCosDscp
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.4
rlQosClassMapMarkValueMark value when mark action has been chosen in
Class Map Action field.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.5
rlQosClassMapPolicerPolicer pointer. 0-means no policer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.6
rlQosClassMapMatch1Match ACL 1 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.7
rlQosClassMapMatch2Match ACL 2 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.8
rlQosClassMapMarkVlanIf 'enabled', than the classified
traffic will be remarked with new VLAN id.
If 'disabled' VLAN id is not changed.
BinaryStatusr/w
Type Values:
1disable
2enable
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.9
rlQosClassMapNewVlanIf rlQosClassMapMarkVlan 'enabled',
than the classified traffic will be
remarked with new VLAN id.
The value of this field sets new VLAN id.
Integer32r/w
Constraints:
range: 0-4095
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.10
rlQosClassMapNewPortIf value not zero, than the classified
traffic will be redirected to the new
egress physical port. The value of this
field sets new egress port.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.11
rlQosClassMapCopyPortIf value not zero, than the classified
traffic will be copied to the desination
copy port. The value of this field sets
desination copy port.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.12
rlQosClassMapStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.13
rlQosClassMapMatch3Match ACL 3 pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.9.1.14
.1.3.6.1.4.1.171.10.94.89.89.88.10 · 1 row entry · 8 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosPolicerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosPolicerTable'
This table specifies All the Policers in the system Information
rlQosPolicerEntry row .1.3.6.1.4.1.171.10.94.89.89.88.10.1
Each entry in this table describes one policer.
The information includes: Policer name, Policer type, Committed Rate,
Committed Burst, Out-of-Profile Action.
The index is sequential integer represent by rlQosPolicerIndex
Column Syntax OID
rlQosPolicerIndexPolicer Index.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.1
rlQosPolicerNameName of the Policer.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.2
rlQosPolicerTypePolicer typePolicerTyper/w
Type Values:
1single
2aggregate
3cascade
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.3
rlQosPolicerCirCommitted rate value.kbpsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.4
rlQosPolicerCbsCommitted rate Value.bytesSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.5
rlQosPolicerActionOut of profile Action.PolicerActionr/w
Type Values:
1none
2drop
3remark
4explicit-remark
5cascadePointer
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.6
rlQosPolicerCasPointerRemValPointer to use whan the type is
cascade policer. 0-means no cascade policer. It can also be
Remark value in case of explicit remark
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.7
rlQosPolicerStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.10.1.8
.1.3.6.1.4.1.171.10.94.89.89.88.11 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosPolicyMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosPolicyMapTable'
This table specifies Policy Map Table Information
rlQosPolicyMapEntry row .1.3.6.1.4.1.171.10.94.89.89.88.11.1
Each entry in this table describes one policy map.
The information includes: Index, Policy Map name,
Up to 6 class map names.
The index is sequential integer represent by rlQosPolicerIndex
Column Syntax OID
rlQosPolicyMapIndexPolicy map Index.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.11.1.1
rlQosPolicyMapNamePolicy map Name.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.11.1.2
rlQosPolicyMapStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.11.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.12 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosPolicyClassRefTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosPolicyClassRefTable'
This table specifies The relationship
between policy map to class map
rlQosPolicyClassRefEntry row .1.3.6.1.4.1.171.10.94.89.89.88.12.1
Each entry in this table describes the connection
between class-map entry to policy map by using pointers.
The index is Class map pointer
represent by rlQosPolicyClassRefClassPointer
Column Syntax OID
rlQosPolicyClassRefClassPointerThe Index is the Class-map pointerInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.12.1.1
rlQosPolicyClassRefPolicyPointerPolicy map index PointerInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.12.1.2
rlQosPolicyClassRefStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.12.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.13 · 1 row entry · 21 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosIfPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosIfPolicyTable'
This table specifies for each interface
the Policy Map attach to it
rlQosIfPolicyEntry row .1.3.6.1.4.1.171.10.94.89.89.88.13.1
Each entry in this table describes what policy
Map attached to specific Interface.
The index is Interface Index represent by rlIfIndex and
the interface type represent by rlIfType
Column Syntax OID
rlIfIndexInterface Index.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.1
rlIfTypeInterface Type(vlan/port).InterfaceType
Type Values:
1vlan
2port
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.2
rlQosIfPolicyMapPointerInPolicy map pointer Input.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.3
rlQosIfPolicyMapPointerOutPolicy map pointer Output.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.4
rlQosIfTrustActiveInterface Basic Mode Trust is active or not .BinaryStatusr/w
Type Values:
1disable
2enable
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.5
rlQosPortShaperStatusIf there is shaper on the portBinaryStatusr/w
Type Values:
1disable
2enable
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.6
rlQosCirPortShaperThe CIR for the port shaper.
N/A when the shper is disabled
bpsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.7
rlQosCbsPortShaperThe CBS for the port shaper.
N/A when the shper is disabled
bytesInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.8
rlQosIfProfilePointerInterface Profile name pointer.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.9
rlQosQueueProfilePointerQueue Profile name pointer.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.10
rlQosQueueShapeProfilePointerQueue shape Profile pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.11
rlQosAclDefaultActionWhen one ACL is enterd then what to do for the last rull.AclDefaultActionr/w
Type Values:
1deny-all
2forward-all
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.12
rlQosIfPolicyMapStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.13
rlQosIfAclInIndex of an ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.14
rlQosIfAclOutIndex of an ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.15
rlQosIfPolicerInIndex of an Policer in the rlQosPolicerTable, which is applied
to the ingress of an interface.
0 - means no Policer applied.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.16
rlQosPortRateLimitStatusIf there is Rate limit on the portBinaryStatusr/w
Type Values:
1disable
2enable
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.17
rlQosCirPortRateLimitThe CIR for the port rate limit.
N/A when the Rate limit is disabled
bpsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.18
rlQosCbsPortRateLimitThe CBS for the port Rate limit.
N/A when the Rate limit is disabled
bytesInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.19
rlQosIfIpv6AclInIndex of an IPv6 ACL in the rlQosAclTable, which is applied
to the ingress of an interface.
0 - means no ACL applied.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.20
rlQosIfIpv6AclOutIndex of an IPv6 ACL in the rlQosAclTable, which is applied
to the egress of an interface.
0 - means no ACL applied.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.13.1.21
.1.3.6.1.4.1.171.10.94.89.89.88.14 · 1 row entry · 16 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosIfProfileCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosIfProfileCfgTable'
This table specifies for each Queue the Tail
Drop or WRED parameters and the EF of WRR
parameters.
rlQosIfProfileCfgEntry row .1.3.6.1.4.1.171.10.94.89.89.88.14.1
Each entry in this table describes one queue
parameters: Tail-drop threshold for drop precedence
0,1,3 and the WRED min-max threshold and the probability
factor for Drop precedence 0,1,2 and the WRED Q factor
and the EF…
Column Syntax OID
rlIfProfileNameInterface Index.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.1
rlQosQueueIdQueue id Index.Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.2
rlQosTdThersholdDp0Tail Drop Threshold for Drop Precedence 0.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.3
rlQosTdThersholdDp1Tail Drop Threshold for Drop Precedence 1.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.4
rlQosTdThersholdDp2Tail Drop Threshold for Drop Precedence 2.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.5
rlQosRedMinDp0WRED Min Threshold for Drop Precedence 2.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.6
rlQosRedMaxDp0WRED Max Threshold for Drop Precedence 0.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.7
rlQosRedProbDp0WRED probability for Drop Precedence 0.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.8
rlQosRedMinDp1WRED Min Threshold for Drop Precedence 2.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.9
rlQosRedMaxDp1WRED Max Threshold for Drop Precedence 1.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.10
rlQosRedProbDp1WRED probability for Drop Precedence 1.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.11
rlQosRedMinDp2WRED Min Threshold for Drop Precedence 2.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.12
rlQosRedMaxDp2WRED Max Threshold for Drop Precedence 2.percentInteger32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.13
rlQosRedProbDp2WRED probability for Drop Precedence 2.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.14
rlQosRedQweightQ factor for WRED.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.15
rlQosIfprofileStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.14.1.16
.1.3.6.1.4.1.171.10.94.89.89.88.15 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosDscpMutationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosDscpMutationTable'
This table specifies The DSCP
Mutation table
rlQosDscpMutationEntry row .1.3.6.1.4.1.171.10.94.89.89.88.15.1
Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp
Indexes
Column Syntax OID
rlQosOldDscpOld DSCP.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.171.10.94.89.89.88.15.1.1
rlQosNewDscpNew DSCP.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.171.10.94.89.89.88.15.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.16 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosDscpRemarkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosDscpRemarkTable'
This table specifies The DSCP
Remark table
rlQosDscpRemarkEntry row .1.3.6.1.4.1.171.10.94.89.89.88.16.1
Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlQosOldDscp
Indexes
Column Syntax OID
rlQosRmOldDscpOld DSCP.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.171.10.94.89.89.88.16.1.1
rlQosRmNewDscpNew DSCP.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.171.10.94.89.89.88.16.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.17 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosCosQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosCosQueueTable'
This table specifies The Cos
to queue map table
rlQosCosQueueEntry row .1.3.6.1.4.1.171.10.94.89.89.88.17.1
Each entry in this table describes queue ID.
The index is CoS represent by rlQosCosIndex
Indexes
Column Syntax OID
rlQosCosIndexCoS value (0-7).Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.171.10.94.89.89.88.17.1.1
rlQosCosQueueIdQueue ID.Integer32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.17.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.18 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosDscpQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosDscpQueueTable'
This table specifies The DSCP
to Queue map table
rlQosDscpQueueEntry row .1.3.6.1.4.1.171.10.94.89.89.88.18.1
Each entry in this table describes The
Queue Number.
The index is DSCP represent by rlQosDscpIndex
Indexes
Column Syntax OID
rlQosDscpIndexDSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.171.10.94.89.89.88.18.1.1
rlQosQueueNumQueue Number.Integer32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.18.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.19 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosTcpPortQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosTcpPortQueueTable'
This table specifies TCP
Port to Queue map table
rlQosTcpPortQueueEntry row .1.3.6.1.4.1.171.10.94.89.89.88.19.1
Each entry in this table describes The
Queue Number.
The index is TCP/UDP port represent by rlQosTcpUdpPort
Indexes
Column Syntax OID
rlQosTcpPortTCP port number.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.19.1.1
rlQosTcpQueueValueQueue Number.Integer32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.19.1.2
rlQosTcpPortQueueStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.19.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.20 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosUdpPortQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosUdpPortQueueTable'
This table specifies UDP
Port to Queue map table
rlQosUdpPortQueueEntry row .1.3.6.1.4.1.171.10.94.89.89.88.20.1
Each entry in this table describes The
Queue Number.
The index is UDP port represent by rlQosTcpUdpPort
Indexes
Column Syntax OID
rlQosUdpPortUDP port number.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.20.1.1
rlQosUdpQueueValueQueue value.Integer32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.20.1.2
rlQosUdpPortQueueStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.20.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.21 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosEfManageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosEfManageTable'
This table specifies UDP
Port to DSCP map table
rlQosEfManageEntry row .1.3.6.1.4.1.171.10.94.89.89.88.21.1
This Table describes The
EF management for the system.
The index is UDP port represent by rlQosEfQueueId
Indexes
Column Syntax OID
rlQosEfQueueIdQueue-ID.Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.21.1.1
rlQosEfStateEnable/disableBinaryStatusr/w
Type Values:
1disable
2enable
.1.3.6.1.4.1.171.10.94.89.89.88.21.1.2
rlQosEfPriorityThe priority of the queueInteger32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.21.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.22 · 1 row entry · 19 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosQueueProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosQueueProfileTable'
This table describes the queue managment profiles
rlQosQueueProfileEntry row .1.3.6.1.4.1.171.10.94.89.89.88.22.1
Each entry in this table describes The
queue managment profile Value.
The index is profile name represent by rlQueueProfileName
Column Syntax OID
rlQueueProfileNameProfile name for the Queue profile.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.1
rlQosTypeQueue1EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.2
rlQosValueQueue1for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.3
rlQosTypeQueue2EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.4
rlQosValueQueue2for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.5
rlQosTypeQueue3EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.6
rlQosValueQueue3for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.7
rlQosTypeQueue4EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.8
rlQosValueQueue4for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.9
rlQosTypeQueue5EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.10
rlQosValueQueue5for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.11
rlQosTypeQueue6EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.12
rlQosValueQueue6for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.13
rlQosTypeQueue7EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.14
rlQosValueQueue7for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.15
rlQosTypeQueue8EF or WRRQueueTyper/w
Type Values:
1ef
2wrr
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.16
rlQosValueQueue8for EF read-only for wrr the weightInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.17
rlQosQueueProfileStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.18
rlQosNumOfIfConnectionshow many time this entry connected to the if policy tableInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.22.1.19
.1.3.6.1.4.1.171.10.94.89.89.88.23 · 1 row entry · 18 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosQueueShapeProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosQueueShapeProfileTable'
This table specifies the queue shaper profile
rlQosQueueShapeProfileEntry row .1.3.6.1.4.1.171.10.94.89.89.88.23.1
Each entry in this table describes The
shaper profile for all queues.
The index sequencial index represent by rlQosQueueShapeIndex
Column Syntax OID
rlQosQueueShapeIndexProfile Index.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.1
rlQosCirQueue1CIR for Queue1 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.2
rlQosCbsQueue1CBS for Queue1 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.3
rlQosCirQueue2CIR for Queue2 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.4
rlQosCbsQueue2CBS for Queue2 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.5
rlQosCirQueue3CIR for Queue3 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.6
rlQosCbsQueue3CBS for Queue3 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.7
rlQosCirQueue4CIR for Queue4 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.8
rlQosCbsQueue4CBS for Queue4 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.9
rlQosCirQueue5CIR for Queue5 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.10
rlQosCbsQueue5CBS for Queue5 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.11
rlQosCirQueue6CIR for Queue6 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.12
rlQosCbsQueue6CBS for Queue6 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.13
rlQosCirQueue7CIR for Queue7 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.14
rlQosCbsQueue7CBS for Queue7 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.15
rlQosCirQueue8CIR for Queue8 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.16
rlQosCbsQueue8CBS for Queue8 0 for not activeInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.17
rlQosQueueShapeProfileStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.23.1.18
.1.3.6.1.4.1.171.10.94.89.89.88.24 · 1 row entry · 4 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosAclCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosAclCounterTable'
The  table is used to show statistics for
ACL applied on an interface.
rlQosAclCounterEntry row .1.3.6.1.4.1.171.10.94.89.89.88.24.1
This entry shows value of conter for a
particular ACE of an ACL.
Column Syntax OID
rlQosAclCounterInterfaceInterface Index on which ACL is applied.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.171.10.94.89.89.88.24.1.1
rlQosAclCounterAclIndexIndex of ACL, which was applied on the IfIndex.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.24.1.2
rlQosAclCounterAceIndexIndex of ACE, which is belong to an ACL.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.24.1.3
rlQosAclCounterValueThe value of the ACE counter.
For Broadcom ASICs it shows number
of matched packets.
For Marvel ASICs -TBD.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.171.10.94.89.89.88.24.1.4
.1.3.6.1.4.1.171.10.94.89.89.88.25 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosFreeIndexesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosFreeIndexesTable'
The  table is used to get free indexes of tables to create
new entries. The algorithm for free indexes depends on
table's type:
Tuple table      - first free index.
Offset table     - first free index.
ACE table        - last used index + ACE indexes delta.
ACL table        - first free index.
Class Map table  - last used index + Class Map indexes delta.
Policy Map table - first free index.
Policer Table    - first free index.
The ACE indexes delta and Class Map indexes delta are used
to supply QoS MIB user easy insert entry capabilities.
Values of these deltas depend on the MIB implementation.
The 'Get and increment' approach is used in all cases.
rlQosFreeIndexesEntry row .1.3.6.1.4.1.171.10.94.89.89.88.25.1
The entry is used to get free index for particular table.
Column Syntax OID
rlQosFreeIndexesTableIdIdentification of the table, for which free index
is retrieved.
Enumeration
Enumerated Values:
1tuple
2offset
3ace
4acl
5class
6policy
7policer
8shaper
.1.3.6.1.4.1.171.10.94.89.89.88.25.1.1
rlQosFreeIndexesValueFree index for table. 0 means no free entries.Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.25.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.26 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosNamesToIndexesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosNamesToIndexesTable'
The table is used to get the ACL,Class-Map and Policy-Map
indexes from the name.
rlQosNamesToIndexesEntry row .1.3.6.1.4.1.171.10.94.89.89.88.26.1
The entry is used to get index form particular name and table type.
Column Syntax OID
rlQosNamesToIndexesTableIdIdentification of the table, for which the index
is retrieved.
Enumeration
Enumerated Values:
1acl
2class
3policy
4policer
.1.3.6.1.4.1.171.10.94.89.89.88.26.1.1
rlQosNamesToIndexesNameThe name of the entryOctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.26.1.2
rlQosNamesToIndexesValuethe index for tableInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.26.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.29 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosCosQueueDefaultMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosCosQueueDefaultMapTable'
The table is used to set default 802.1p map (vpt to queue)
rlQosCosQueueDefaultMapEntry row .1.3.6.1.4.1.171.10.94.89.89.88.29.1
The entry is used to get index form particular name and table type.
Column Syntax OID
rlQosCosQueueDefaultMapVptvlan priority tag , 3 bits of priority which determine
the service class.
Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.171.10.94.89.89.88.29.1.1
rlQosCosQueueDefaultMapQueueIdthe queue id vary from the first queue id to Max Number of queues supportedInteger32
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.29.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.30 · 1 row entry · 4 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosPredefBlockAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosPredefBlockAclTable'
The table is used apply predefined ACLs to interfaces.
Predefined ACLs is ACL to filter particular protocol or
protocol's family. These ACL may operate simultaneously
with IP and MAC ACLs.
rlQosPredefBlockAclEntry row .1.3.6.1.4.1.171.10.94.89.89.88.30.1
The entry is used to apply predefined ACLs to the interface.
Column Syntax OID
rlQosPredefBlockAclIfIndexIfIndex of port/trunk or VLAN tag of VLAN
on which predefined ACLa will be configured.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.171.10.94.89.89.88.30.1.1
rlQosPredefBlockAclIfTypeInterface Type(vlan/port).InterfaceType
Type Values:
1vlan
2port
.1.3.6.1.4.1.171.10.94.89.89.88.30.1.2
rlQosPredefBlockAclMaskThis bitmap defines predefined ACL which are applied
on an interface. The table below defines bitmasks for
supported predefined ACL.
Protocol/Family bitmask Description
==============================================…
OctetStringr/w
Constraints:
range: 1-1
.1.3.6.1.4.1.171.10.94.89.89.88.30.1.3
rlQosPredefBlockAclStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.30.1.4
.1.3.6.1.4.1.171.10.94.89.89.88.31 · 1 row entry · 16 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosAceTidxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosAceTidxTable'
This table specifies ACE table with two index information
rlQosAceTidxEntry row .1.3.6.1.4.1.171.10.94.89.89.88.31.1
Each entry in this table describes one Classifier Element.
The information includes: Action the ACE's Type the up to 8 tuples
pointers. The index is sequential integer represent by
rlQosAceTidxAclIndex ACL index and rlQ…
Column Syntax OID
rlQosAceTidxAclIndexAn arbitrary incremental Index
for the ACL ACE connection.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.1
rlQosAceTidxIndexAn arbitrary incremental Index
for the ACE table.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.2
rlQosAceTidxActionACE Action to take.AceActionTyper/w
Type Values:
1permit
2deny
3deny-DisablePort
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.3
rlQosAceTidxTypeACE TypeAceObjectTyper/w
Type Values:
1ip
2ip-TCP
3ip-UDP
4ip-Offset
5mac
6mac-Offset
7ip-ICMP
8ip-IGMP
9ipv6
10ipv6-TCP
11ipv6-UDP
12ipv6-Offset
13ipv6-ICMP
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.4
rlQosAceTidxTuple1ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.5
rlQosAceTidxTuple2ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.6
rlQosAceTidxTuple3ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.7
rlQosAceTidxTuple4ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.8
rlQosAceTidxTuple5ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.9
rlQosAceTidxTuple6ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.10
rlQosAceTidxTuple7ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.11
rlQosAceTidxTuple8ACE Tuple pointer.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.12
rlQosAceTidxAccountACE Accounting state.
When set to 'enabled' than appropriate statistic's
counter is provided for an ACE.
For Broadcom ASICs this counter shows number of
matched with ACE criteria packets.
For Dlink ASICs TBD.
BinaryStatusr/w
Type Values:
1disable
2enable
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.13
rlQosAceTidxStatusThe status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.14
rlQosAceTidxTimeRangeACE time range name.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.15
rlQosAceTidxTimeRangeIsActiveACE time range is rule active state shows is ACE currently active or not.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.171.10.94.89.89.88.31.1.16
.1.3.6.1.4.1.171.10.94.89.89.88.33 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosDscpQueueDefaultMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosDscpQueueDefaultMapTable'
The table is used to set default dscp to queue map
rlQosDscpQueueDefaultMapEntry row .1.3.6.1.4.1.171.10.94.89.89.88.33.1
The entry is used to get index form particular name and table type.
Column Syntax OID
rlQosDscpQueueDefaultMapDscpdscp , 6 bits of priority which determine
the service class.
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.171.10.94.89.89.88.33.1.1
rlQosDscpQueueDefaultMapQueueIdthe queue id vary from the first queue id to Max Number of queues supportedInteger32
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.33.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.34 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosDscpToDpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosDscpToDpTable'
This table specifies The DSCP
To Dp table
rlQosDscpToDpEntry row .1.3.6.1.4.1.171.10.94.89.89.88.34.1
Each entry in this table describes the new
DP for the packet.
The index is DSCP represent by rlQosDscp
Indexes
Column Syntax OID
rlQosDscpPacket DSCP.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.171.10.94.89.89.88.34.1.1
rlQosDpNew DP.Integer32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.171.10.94.89.89.88.34.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.35.1 · 1 row entry · 4 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosPortPolicyStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosPortPolicyStatisticsTable'
This table specifies statistics counter for policies with specific actions
rlQosPortPolicyStatisticsEntry row .1.3.6.1.4.1.171.10.94.89.89.88.35.1.1
Each entry in this table describes counter per port.
The index is port represent by rlIfIndex.
In each entry represents counter, it's type , it's size and whether it's enabled.
Column Syntax OID
rlQosPortPolicyStatisticsCntrTypeCounter type.StatisticsCntrTyper/w
Type Values:
1statisticsCntrTypeSetDSCP
2statisticsCntrTypeDeny
.1.3.6.1.4.1.171.10.94.89.89.88.35.1.1.1
rlQosPortPolicyStatisticsCntrNumOfBitsCounter size in bits.StatisticsCntrNumOfBitsType
Type Values:
32uint32
48uint48
64uint64
.1.3.6.1.4.1.171.10.94.89.89.88.35.1.1.2
rlQosPortPolicyStatisticsEnableCountingIndication whether the counter is enabled.SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.171.10.94.89.89.88.35.1.1.3
rlQosPortPolicyStatisticsCounterValueCounter value.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.1.1.4
.1.3.6.1.4.1.171.10.94.89.89.88.35.2 · 1 row entry · 5 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosSinglePolicerStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosSinglePolicerStatisticsTable'
This table specifies statistics counters per QoS meter
rlQosSinglePolicerStatisticsEntry row .1.3.6.1.4.1.171.10.94.89.89.88.35.2.1
Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether t…
Column Syntax OID
rlQosSinglePolicerStatisticsInProfileCounterValueCounter value of in profile traffic.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.2.1.1
rlQosSinglePolicerStatisticsInProfileCntrNumOfBitsCounter size in bits for in profile counter.StatisticsCntrNumOfBitsType
Type Values:
32uint32
48uint48
64uint64
.1.3.6.1.4.1.171.10.94.89.89.88.35.2.1.2
rlQosSinglePolicerStatisticsOutProfileCounterValueCounter value of Out Profile traffic.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.2.1.3
rlQosSinglePolicerStatisticsOutProfileCntrNumOfBitsCounter size in bits for out profile counter.StatisticsCntrNumOfBitsType
Type Values:
32uint32
48uint48
64uint64
.1.3.6.1.4.1.171.10.94.89.89.88.35.2.1.4
rlQosSinglePolicerStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.35.2.1.5
.1.3.6.1.4.1.171.10.94.89.89.88.35.3 · 1 row entry · 5 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosAggregatePolicerStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosAggregatePolicerStatisticsTable'
This table specifies statistics counters per QoS aggregate meter
rlQosAggregatePolicerStatisticsEntry row .1.3.6.1.4.1.171.10.94.89.89.88.35.3.1
Each entry in this table describes counter per aggregate meter.
The index is rlQosPolicerIndex.
In each entry there are fields representing whether the counter for the
meter is enabled and three counters values - for gr…
Column Syntax OID
rlQosAggregatePolicerStatisticsInProfileCounterValueCounter value of In Profile amount of bytes.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.3.1.1
rlQosAggregatePolicerStatisticsInProfileCntrNumOfBitsCounter size in bits for In Profile .StatisticsCntrNumOfBitsType
Type Values:
32uint32
48uint48
64uint64
.1.3.6.1.4.1.171.10.94.89.89.88.35.3.1.2
rlQosAggregatePolicerStatisticsOutProfileCounterValueCounter value of Out Profile amount of bytes.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.3.1.3
rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBitsCounter size in bits for Out Profile.StatisticsCntrNumOfBitsType
Type Values:
32uint32
48uint48
64uint64
.1.3.6.1.4.1.171.10.94.89.89.88.35.3.1.4
rlQosAggregatePolicerStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.35.3.1.5
.1.3.6.1.4.1.171.10.94.89.89.88.35.4 · 1 row entry · 13 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosOutQueueStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosOutQueueStatisticsTable'
This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence
rlQosOutQueueStatisticsEntry row .1.3.6.1.4.1.171.10.94.89.89.88.35.4.1
Each entry in this table describes counter per any permutation of
Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'.
The index is port represent by rlQosOutQueueStatisticsCountrID.
In each entry t…
Column Syntax OID
rlQosOutQueueStatisticsCountrIDCounter id, the key of the table.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.1
rlQosOutQueueStatisticsIfIndexListPort for which the flow is counted.Q-BRIDGE-MIBPortListr/w.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.2
rlQosOutQueueStatisticsPortAllIndication for whether the port is configured as range of all the portsSNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.3
rlQosOutQueueStatisticsVlanVLAN for which the flow is counted.Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.4
rlQosOutQueueStatisticsVlanAllIndication for whether the VLAN is configured as range of all the VLANSSNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.5
rlQosOutQueueStatisticsQueueQueue for which the flow is counted.Integer32r/w
Constraints:
range: 1-8
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.6
rlQosOutQueueStatisticsQueueAllIndication for whether the queue is configured as range of all the QueuesSNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.7
rlQosOutQueueStatisticsDPDrop Precedence for which the flow is counted.DLINK-3100-POLICY-MIBStatisticsDPTyper/w
Type Values:
1green
2yellow
3red
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.8
rlQosOutQueueStatisticsDPAllIndication for whether the DP is configured as range of all the DPsSNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.9
rlQosOutQueueStatisticsCounterTailDropValueThe counter for tail dropped value.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.10
rlQosOutQueueStatisticsCounterAllValueThe counter for all traffic value.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.11
rlQosOutQueueStatisticsCntrNumOfBitsCounter size in bits for the counter.StatisticsCntrNumOfBitsType
Type Values:
32uint32
48uint48
64uint64
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.12
rlQosOutQueueStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.35.4.1.13
.1.3.6.1.4.1.171.10.94.89.89.88.35.5 · 1 row entry · 4 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosGlobalStatisticsCntrsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosGlobalStatisticsCntrsTable'
This table specifies statistics global counters  for specific rules for all ports
that they are connected to
rlQosGlobalStatisticsCntrsEntry row .1.3.6.1.4.1.171.10.94.89.89.88.35.5.1
Each entry represents global counter.
Column Syntax OID
rlQosGlobalStatisticsCntrsTypeCounter type.StatisticsCntrType
Type Values:
1statisticsCntrTypeSetDSCP
2statisticsCntrTypeDeny
.1.3.6.1.4.1.171.10.94.89.89.88.35.5.1.1
rlQosGlobalStatisticsCntrsNumOfBitsCounter size in bits.StatisticsCntrNumOfBitsType
Type Values:
32uint32
48uint48
64uint64
.1.3.6.1.4.1.171.10.94.89.89.88.35.5.1.2
rlQosGlobalStatisticsCntrsCounterValueCounter value.SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.171.10.94.89.89.88.35.5.1.3
rlQosGlobalStatisticsStatusThe status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.35.5.1.4
.1.3.6.1.4.1.171.10.94.89.89.88.36.1 · 1 row entry · 3 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosClassifierUtilizationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosClassifierUtilizationTable'
A table containing Classifier utilization information.
Each row represents objects for a particular Unit
present in this system.
rlQosClassifierUtilizationEntry row .1.3.6.1.4.1.171.10.94.89.89.88.36.1.1
A Single entry containing Classifier utilization information.
Column Syntax OID
rlQosClassifierUtilizationUnitIdThe Unit ID of this Classifier. must be unique per entry.
This is an index into the table.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.171.10.94.89.89.88.36.1.1.1
rlQosClassifierUtilizationPercentThe classifier utilization percentage.Unsigned32
Constraints:
range: 0-100
.1.3.6.1.4.1.171.10.94.89.89.88.36.1.1.2
rlQosClassifierUtilizationRulesNumberThe classifier utilization number of used rules, in short rules resolution.Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.171.10.94.89.89.88.36.1.1.3
.1.3.6.1.4.1.171.10.94.89.89.88.37 · 1 row entry · 2 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosPortToProfileMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosPortToProfileMappingTable'
This table maps between port and profile
rlQosPortToProfileMappingEntry row .1.3.6.1.4.1.171.10.94.89.89.88.37.1
Each entry in this table describes
mapping between port and profile
Indexes
Column Syntax OID
rlQosPortPort numberInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.171.10.94.89.89.88.37.1.1
rlQosProfileNameprofileSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.171.10.94.89.89.88.37.1.2
.1.3.6.1.4.1.171.10.94.89.89.88.38 · 1 row entry · 4 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosTimeBasedAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosTimeBasedAclTable'
This table specifies Time Based ACL table
rlQosTimeBasedAclEntry row .1.3.6.1.4.1.171.10.94.89.89.88.38.1
Each entry in this table describes the new
time range for ACE.
The index is time range name
Column Syntax OID
rlQosTimeBasedAclRangeNameName of time range.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.171.10.94.89.89.88.38.1.1
rlQosTimeBasedAclAbsStartTime of start of absolute time range in following format:
month day year hh:mm
month: 01-12 (January-December)
day: 01-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
OctetStringr/w
Constraints:
range: 0-14
.1.3.6.1.4.1.171.10.94.89.89.88.38.1.2
rlQosTimeBasedAclAbsEndTime of end of absolute time range in following format:
month day year hh:mm
month: 01-12 (January-December)
day: 01-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
OctetStringr/w
Constraints:
range: 0-14
.1.3.6.1.4.1.171.10.94.89.89.88.38.1.3
rlQosTimeBasedAclStatusThe status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.38.1.4
.1.3.6.1.4.1.171.10.94.89.89.88.39 · 1 row entry · 5 columns
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk rlQosTimeBasedAclPeriodicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DLINK-3100-QOS-CLI-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DLINK-3100-QOS-CLI-MIB::rlQosTimeBasedAclPeriodicTable'
This table specifies Time Based ACL Periodic table
rlQosTimeBasedAclPeriodicEntry row .1.3.6.1.4.1.171.10.94.89.89.88.39.1
Each entry in this table describes the new
periodic time range for ACE.
The index is time range index and periodic index
Column Syntax OID
rlQosTimeBasedAclPeriodicNameIndex of time range.OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.171.10.94.89.89.88.39.1.1
rlQosTimeBasedAclPeriodicWeekListThe bitmap allows to user to select periodic time range for several
days at once. The periodic range will be associated with specific days
when corresponding bits will be set. If at least one bit has been set in the
rlQ…
RlQosTimeBasedAclWeekPeriodicListr/w
Type Values:
0monday
1tuesday
2wednesday
3thursday
4friday
5saturday
6sunday
.1.3.6.1.4.1.171.10.94.89.89.88.39.1.2
rlQosTimeBasedAclPeriodicStartTime of start of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minute…
OctetStringr/w
Constraints:
range: 0-7
.1.3.6.1.4.1.171.10.94.89.89.88.39.1.3
rlQosTimeBasedAclPeriodicEndTime of end of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minutes)…
OctetStringr/w
Constraints:
range: 0-7
.1.3.6.1.4.1.171.10.94.89.89.88.39.1.4
rlQosTimeBasedAclPeriodicStatusThe status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.171.10.94.89.89.88.39.1.5