DLINK-3100-IP Table View

This table is parralel to MIB II IpAddrTable, and is used to
add/delete entries to/from that table. In addition it contains
private objects.

rsIpAddrEntry row .1.3.6.1.4.1.171.10.94.89.89.26.1.1

The addressing information for one of this
entity's IP addresses.

Indexes

rsIpAdEntAddr

Column	Syntax	OID
rsIpAdEntAddr The IP address to which this entry's addressing information pertains.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.1
rsIpAdEntIfIndex The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.2
rsIpAdEntNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.3
rsIpAdEntForwardIpBroadcast This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.4
rsIpAdEntBackupAddr In case there are two IP routers in the domain, the address of the second IP router.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.5
rsIpAdEntStatus The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II).	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.6
rsIpAdEntBcastAddr Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.	Integer32r/w Constraints: range: 0-1	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.7
rsIpAdEntArpServer Indicates whether the router will reply to incoming ARP requests on this interface, providing the physical address corresponding to this IP interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.8
rsIpAdEntName The IP Interface name	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.9
rsIpAdEntOwner The IP Interface owner. Static if interface defined by user, dhcp if received by boot protocol like DHCP and internal for internal usage.	Enumerationr/w Enumerated Values: 1 static 2 dhcp 3 internal 4 default	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.10
rsIpAdEntAdminStatus The IP Interface admin status.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.11
rsIpAdEntOperStatus If active the interface can be used to send and receive frames.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.12
rsIpAdEntPrecedence The IP preference, to be selected as source IP for rsIpAdEntIfIndex. this source IP selection is first by preference value. if more than one IP has the same preference the one with the lowest IP is selected. (higher val…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.10.94.89.89.26.1.1.13

This table contains ICMP Router Discovery parameters
configurated per IP interface.

rsIcmpRdEntry row .1.3.6.1.4.1.171.10.94.89.89.26.2.2.1

The ICMP parameters configurated for IP interface.

Indexes

rsIcmpRdIpAddr

Column	Syntax	OID
rsIcmpRdIpAddr The IP address to which this entry's information pertains.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.1
rsIcmpRdIpAdvertAddr The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.2
rsIcmpRdMaxAdvertInterval The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.3
rsIcmpRdMinAdvertInterval The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpR…	Integer32r/w Constraints: range: 3-1800	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.4
rsIcmpRdAdvertLifetime The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.	Integer32r/w Constraints: range: 4-9000	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.5
rsIcmpRdAdvertise A flag indicating whether or not the address is to be advertised.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.6
rsIcmpRdPreferenceLevel The preferability of the address as a default router address, relative to other router addresses on the same subnet.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.7
rsIcmpRdEntStatus Setting of any value to this object set values of all fields to the default values.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.26.2.2.1.8

This table translates IP interfaces's name to
IP interface's address

rlTranslationNameToIpEntry row .1.3.6.1.4.1.171.10.94.89.89.26.12.1

The row definition for this table.

Indexes

rlTranslationNameToIpName

Column	Syntax	OID
rlTranslationNameToIpName The IP Interface name	OctetString Constraints: range: 1-30	.1.3.6.1.4.1.171.10.94.89.89.26.12.1.1
rlTranslationNameToIpIpAddr The IP Interface address	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.12.1.2

Augmenting ipCidrRouteTable (ip forwarfing information table)
for added info as read only

rlIpCidrRouteExtEntry row .1.3.6.1.4.1.171.10.94.89.89.26.16.1

A row of the table ipCidrRouteTable Extended
by this definition.

Indexes

No indexes recorded

Column	Syntax	OID
rlIpCidrRouteProto Added infor for ipCidrRouteTable. extends the info of ipCidrRouteProto to show the route inner protocol. Allowes the user to see which type of route in the protocol e.g. ospf internal, ospf external.	Enumeration Enumerated Values: 1 local 2 netmgmt 3 rip 4 ospfInternal 5 ospfExternal 6 ospfAggregateNetRange 7 bgp4Internal 8 bgp4External 9 aggregateRoute 10 other	.1.3.6.1.4.1.171.10.94.89.89.26.16.1.1

This entity's    static (user configured) IP Routing table.
entries are MAX-ACCESSible even if not used for forwarding

rlIpStaticRouteEntry row .1.3.6.1.4.1.171.10.94.89.89.26.17.1.1

A particular Static(user configured) route to a particular destina-
tion, under a particular policy.

Indexes

rlIpStaticRouteDest rlIpStaticRouteMask rlIpStaticRouteTos rlIpStaticRouteNextHop

Column	Syntax	OID
rlIpStaticRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bi…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.1
rlIpStaticRouteMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rlIpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent construc…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.2
rlIpStaticRouteTos See ipCidrRouteTos definition For now only value 0 is valid	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.3
rlIpStaticRouteNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.4
rlIpStaticRouteMetric The routing metric for this route. The semantics of this metric are determined by the user. normal semantic will be next hop count or some administarative distance to create routing policy.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.5
rlIpStaticRouteType The type of route. Note that local(3) refers to a route for which the next hop is the final destination this is the case when user overides the a local interface entry to change it parameters; remote(4) refers to a …	Enumerationr/w Enumerated Values: 1 reject 2 local 3 remote	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.6
rlIpStaticRouteNextHopAS The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its va…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.7
rlIpStaticRouteForwardingStatus active - An indication that the route has implication on routing inactive - the route is a backup route or it is down. It is not used in forwarding decision. Down means that the Ip interface on which it is co…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.8
rlIpStaticRouteRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.9
rlIpStaticRouteOwner Static - The route is configured over Static IP. This route is written to configuration files. Dhcp - The route is Configured by DHCP (received as part of DHCP configuration) This route IS NOT written to configuration…	Enumeration Enumerated Values: 1 static 2 dhcp 3 default	.1.3.6.1.4.1.171.10.94.89.89.26.17.1.1.10