DKSF-PWR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
65

npRelayTable

table
.1.3.6.1.4.1.25728.5500.5 · 1 row entry · 7 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npRelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-PWR-MIB' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-PWR-MIB::npRelayTable' 
Watchdog and outlet/relay control table
npRelayEntry row .1.3.6.1.4.1.25728.5500.5.1
Relay/outlet table row
Indexes
Column Syntax OID
npRelayN
The N of output relay
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25728.5500.5.1.1
npRelayMode
Control of relay:
-1 - flip between on(1) and off(0)
0 - manual off
1 - manual on
2 - watchdog
3 - schedule
4 - both schedule and watchdog (while switched on by schedule)
5 - logic
Enumerationr/w
Enumerated Values:
-1flip
0off
1on
2watchdog
3schedule
4scheduleAndWatchdog
5logic
 .1.3.6.1.4.1.25728.5500.5.1.2
npRelayStartReset
Write 1 to start reset (switch relay off for some time)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.5500.5.1.3
npRelayMemo
Relay memo
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.5500.5.1.6
npRelayFlip
Write -1 to flip between manual on and manual off states of relay
Enumerationr/w
Enumerated Values:
-1flip
 .1.3.6.1.4.1.25728.5500.5.1.14
npRelayState
Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.5500.5.1.15
npRelayPowered
AC presence on output (relay operation check)
0 - no AC on output socket
1 - AC is present on oputput
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.25728.5500.5.1.16

npPwrTable

table
.1.3.6.1.4.1.25728.5800.3 · 1 row entry · 8 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npPwrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-PWR-MIB' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-PWR-MIB::npPwrTable' 
Watchdog and outlet/relay control table
npPwrEntry row .1.3.6.1.4.1.25728.5800.3.1
Watchdog control table row
Indexes
Column Syntax OID
npPwrChannelN
The id of watchdog/power channel
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.5800.3.1.1
npPwrStartResetobsolete
Deprecated in current FW version: Write 1 to start forced reset.
On read:
0 - normal operation
1 - reset is active
2 - reboot pause is active or watchdog is inactive
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.25728.5800.3.1.2
npPwrManualMode
Mode of power channel
0 - manual off
1 - manual on
2 - watchdog
3 - schedule
4 - schedule and watchdog
5 - controlled by Logic
Enumerationr/w
Enumerated Values:
0off
1on
2watchdog
3schedule
4scheduleAndWatchdog
5logic
 .1.3.6.1.4.1.25728.5800.3.1.3
npPwrResetsCounter
Counter of watchdog resets
Write 0 to clear.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25728.5800.3.1.4
npPwrRepeatingResetsCounter
Counter of continous failed
watchdog resets
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25728.5800.3.1.5
npPwrMemo
Watchdog channel memo
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.5800.3.1.6
npPwrRelayFlip
Write -1 to flip between manual on and manual off states of relay
Enumerationr/w
Enumerated Values:
-1flip
 .1.3.6.1.4.1.25728.5800.3.1.14
npPwrRelayState
Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.5800.3.1.15

npInputAnalogTable

table
.1.3.6.1.4.1.25728.8200.1 · 1 row entry · 12 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npInputAnalogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-PWR-MIB' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-PWR-MIB::npInputAnalogTable' 
1Wire Current Loop Adapters Table
npInputAnalogEntry row .1.3.6.1.4.1.25728.8200.1.1
1Wire Current Loop Adapters Table Row
Indexes
Column Syntax OID
npInputAnalogSensorN
The id of 1Wire Current Loop Adapter, 1 to 5
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.25728.8200.1.1.1
npInputAnalogStatus
Status of Current Loop Signal,
failure1w = no reply from the adapter on 1wire bus,
failureAnalog = signal is beyond it's Working Range,
belowSafe, safe, aboveSafe - status of the signal
relative to the Safe Range margi…
Enumeration
Enumerated Values:
0failure1w
1belowSafe
2safe
3aboveSafe
5failureAnalog
 .1.3.6.1.4.1.25728.8200.1.1.2
npInputAnalogCurrent
Current via RS_P, RS_N contacts of Current Loop
Adapter, uA (microamperes)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.3
npInputAnalogVoltage
Voltage on RS_P contact of Current Loop
Adapter Vs Ground, mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.4
npInputAnalogResistance
Resistance of the Current Loop, Ohm
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.8200.1.1.5
npInputAnalogMemo
Current Loop memo, what's connected
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.8200.1.1.6
npInputAnalogPower
Controls power on Current Loop Adapter outputs +24V, +12V
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.8200.1.1.7
npInputAnalogReset
Write duration 1..25s to temporary switch off
+12V, +24V outputs to reset sensor on the
current loop by cycling it's power
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.8
npInputAnalogWorkRangeHigh
Top marging of Working Range, uA or mV or Ohm.
If monitored value is outide of Working Range, Analog Failure take place.
If not specified, value is -32768
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.11
npInputAnalogSafeRangeHigh
Top marging of Safe Range, uA or mV or Ohm.
If not specified, value is -32768
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.12
npInputAnalogSafeRangeLow
Bottom marging of Safe Range, uA or mV or Ohm.
If not specified, value is -32768
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.13
npInputAnalogWorkRangeLow
Bottom marging of Working Range, uA or mV or Ohm.
If monitored value is outide of Working Range, Analog Failure take place.
If not specified, value is -32768
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.14

npRelHumTable

table
.1.3.6.1.4.1.25728.8400.1 · 1 row entry · 10 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npRelHumTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-PWR-MIB' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-PWR-MIB::npRelHumTable' 
Humidity+Temperature Sensors Table
npRelHumEntry row .1.3.6.1.4.1.25728.8400.1.1
Humidity+Temperature Sensors Table Row
Indexes
Column Syntax OID
npRelHumN
Index of Humidity+Temperature sensor, 1 to max supported
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.8400.1.1.1
npRelHumValue
Relative humidity value, %
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.8400.1.1.2
npRelHumStatus
Status of Relative Humiduty
Enumeration
Enumerated Values:
0sensorFailed
1belowSafeRange
2inSafeRange
3aboveSafeRange
 .1.3.6.1.4.1.25728.8400.1.1.3
npRelHumTempValue
Sensor temperature, deg.C
Integer32
Constraints:
range: -60-200
 .1.3.6.1.4.1.25728.8400.1.1.4
npRelHumTempStatus
Status of Relative Humiduty
Enumeration
Enumerated Values:
0sensorFailed
1belowSafeRange
2inSafeRange
3aboveSafeRange
 .1.3.6.1.4.1.25728.8400.1.1.5
npRelHumMemo
Sensor Memo/Location
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.8400.1.1.6
npRelHumSafeRangeHigh
Relative Humidity safe range, top margin, %RH
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.8400.1.1.7
npRelHumSafeRangeLow
Relative Humidity safe range, bottom margin, %RH
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.8400.1.1.8
npRelHumTempSafeRangeHigh
Temperature safe range, top margin, deg.C
Integer32
Constraints:
range: -55-150
 .1.3.6.1.4.1.25728.8400.1.1.9
npRelHumTempSafeRangeLow
Temperature safe range, bottom margin, deg.C
Integer32
Constraints:
range: -55-150
 .1.3.6.1.4.1.25728.8400.1.1.10

npThermoTable

table
.1.3.6.1.4.1.25728.8800.1 · 1 row entry · 7 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npThermoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-PWR-MIB' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-PWR-MIB::npThermoTable' 
Thermo Sensors Table
npThermoEntry row .1.3.6.1.4.1.25728.8800.1.1
Thermo Sensors Table Row
Indexes
Column Syntax OID
npThermoSensorN
The id of temperature sensor, 1 to 8
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25728.8800.1.1.1
npThermoValue
Temperature, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.2
npThermoStatus
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
Enumeration
Enumerated Values:
0failed
1low
2norm
3high
 .1.3.6.1.4.1.25728.8800.1.1.3
npThermoLow
Bottom margin of normal temperature range, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.4
npThermoHigh
Top margin of normal temperature range, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.5
npThermoMemo
T channel memo
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.8800.1.1.6
npThermoValuePrecise
Temperature, deg.C, with fractional part 3 digits after point
FixedPoint1000 .1.3.6.1.4.1.25728.8800.1.1.7

npIoTable

table
.1.3.6.1.4.1.25728.8900.1 · 1 row entry · 7 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npIoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-PWR-MIB' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-PWR-MIB::npIoTable' 
Digital Input/output Table
npIoEntry row .1.3.6.1.4.1.25728.8900.1.1
Digital Input/output Table Row
Indexes
Column Syntax OID
npIoLineN
Number of IO line, from 1 to max supported
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.25728.8900.1.1.1
npIoLevelIn
Input level, 0 or 1
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.25728.8900.1.1.2
npIoLevelOut
Output level, 0 or 1.
Write -1 to flip output.
Enumerationr/w
Enumerated Values:
-1flip
0low
1high
 .1.3.6.1.4.1.25728.8900.1.1.3
npIoMemo
IO line memo
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.8900.1.1.6
npIoPulseCounter
Pulse Counter on IO input line (counts positive fronts)
Write 0 to reset.
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.8900.1.1.9
npIoSinglePulseDuration
Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms
Integer32r/w
Constraints:
range: 100-25500
 .1.3.6.1.4.1.25728.8900.1.1.12
npIoSinglePulseStart
Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8900.1.1.13

npVoltageTable

table
.1.3.6.1.4.1.25728.9000.1 · 1 row entry · 14 columns
Open in standard view
Uses the netping variant from /opt/observium/mibs/netping.
Command help
Walk npVoltageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-PWR-MIB' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-PWR-MIB::npVoltageTable' 
Voltage Monitoring Sensors Table
npVoltageEntry row .1.3.6.1.4.1.25728.9000.1.1
Voltage Monitoring Sensors Table Row
Indexes
Column Syntax OID
npVoltageN
The ID of Voltage Monitoring sensor, 1 to 3
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.25728.9000.1.1.1
npVoltageRMS
Voltage value, V
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.25728.9000.1.1.2
npVoltageStatus
Status of voltage
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2bad
3warn
4good
 .1.3.6.1.4.1.25728.9000.1.1.3
npVoltageFreq
Frequency value in units of .01 Hz
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.25728.9000.1.1.4
npVoltageFreqStatus
Status of frequency
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2bad
3warn
4good
 .1.3.6.1.4.1.25728.9000.1.1.5
npVoltageMemo
Voltage Monitoring sensor memo
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.25728.9000.1.1.6
npVoltageSagCounter
Counter of voltage sags
SNMPv2-SMICounter32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.9000.1.1.10
npVoltageSagStatus
Status of voltage sag
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2high
3medium
4small
5noSags
 .1.3.6.1.4.1.25728.9000.1.1.11
npVoltageLowerNoneStatus
The lower margin of NoSags status of voltage sag, %
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.9000.1.1.12
npVoltageLowerSmallStatus
The lower margin of Small status of voltage sag, %
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.9000.1.1.13
npVoltageLowerMediumStatus
The lower margin of Medium status of voltage sag, %
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.9000.1.1.14
npVoltageStandard
Nominal voltage, V
Integer32r/w
Constraints:
range: 100-240
 .1.3.6.1.4.1.25728.9000.1.1.20
npVoltagePeak
Peak voltage, V
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.25728.9000.1.1.30
npVoltagePeakStatus
Status of peak voltage
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2dangerous
3noPeaks
 .1.3.6.1.4.1.25728.9000.1.1.31