DKSF-57-1-X-X-1 Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

npRelayTable

table

.1.3.6.1.4.1.25728.5500.5 · 1 row entry · 6 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npRelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npRelayTable'

Relay control table

npRelayEntry row .1.3.6.1.4.1.25728.5500.5.1

Relay/outlet table row

Indexes

npRelayN

Column Syntax OID

npRelayN

The N of output relay

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.25728.5500.5.1.1

npRelayMode

Control of relay:
-1 - flip between on(1) and off(0)
0 - switch off
1 - switch on

Enumerationr/w

Enumerated Values:

-1	flip
0	off
1	on

.1.3.6.1.4.1.25728.5500.5.1.2

npRelayStartReset

Write 1 to start reset (switch relay off for some time)

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25728.5500.5.1.3

npRelayMemo

Relay memo

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25728.5500.5.1.6

npRelayFlip

Write -1 to flip between manual on and manual off states of relay

Enumerationr/w

Enumerated Values:

-1

flip

.1.3.6.1.4.1.25728.5500.5.1.14

npRelayState

Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.25728.5500.5.1.15

npPwrWdogTable

table

.1.3.6.1.4.1.25728.5800.3 · 1 row entry · 4 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npPwrWdogTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npPwrWdogTable'

Watchdog Control Table

npPwrWdogEntry row .1.3.6.1.4.1.25728.5800.3.1

Watchdog Control Table Row

Indexes

npPwrWdogChannelN

Column	Syntax	OID
npPwrWdogChannelN The N of watchdog/power channel	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.25728.5800.3.1.1`
npPwrWdogResetsCounter Counter of watchdog resets Write 0 to clear.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25728.5800.3.1.4`
npPwrWdogRepeatingResetsCounter Counter of continous failed watchdog resets	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25728.5800.3.1.5`
npPwrWdogMemo Watchdog channel memo	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.25728.5800.3.1.6`

npRelHumTable

table

.1.3.6.1.4.1.25728.8400.1 · 1 row entry · 10 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npRelHumTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npRelHumTable'

Humidity+Temperature Sensors Table

npRelHumEntry row .1.3.6.1.4.1.25728.8400.1.1

Humidity+Temperature Sensors Table Row

Indexes

npRelHumN

Column Syntax OID

npRelHumN

Index of Humidity+Temperature sensor, 1 to max supported

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.25728.8400.1.1.1

npRelHumValue

Relative humidity value, %

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.25728.8400.1.1.2

npRelHumStatus

Status of Relative Humiduty

Enumeration

Enumerated Values:

0	sensorFailed
1	belowSafeRange
2	inSafeRange
3	aboveSafeRange

.1.3.6.1.4.1.25728.8400.1.1.3

npRelHumTempValue

Sensor temperature, deg.C

Integer32

Constraints:
range: -60-200

.1.3.6.1.4.1.25728.8400.1.1.4

npRelHumTempStatus

Status of Relative Humiduty

Enumeration

Enumerated Values:

0	sensorFailed
1	belowSafeRange
2	inSafeRange
3	aboveSafeRange

.1.3.6.1.4.1.25728.8400.1.1.5

npRelHumMemo

Sensor Memo/Location

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25728.8400.1.1.6

npRelHumSafeRangeHigh

Relative Humidity safe range, top margin, %RH

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.25728.8400.1.1.7

npRelHumSafeRangeLow

Relative Humidity safe range, bottom margin, %RH

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.25728.8400.1.1.8

npRelHumTempSafeRangeHigh

Temperature safe range, top margin, deg.C

Integer32

Constraints:
range: -55-150

.1.3.6.1.4.1.25728.8400.1.1.9

npRelHumTempSafeRangeLow

Temperature safe range, bottom margin, deg.C

Integer32

Constraints:
range: -55-150

.1.3.6.1.4.1.25728.8400.1.1.10

npThermoTable

table

.1.3.6.1.4.1.25728.8800.1 · 1 row entry · 7 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npThermoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npThermoTable'

Thermo Sensors Table

npThermoEntry row .1.3.6.1.4.1.25728.8800.1.1

Thermo Sensors Table Row

Indexes

npThermoSensorN

Column Syntax OID

npThermoSensorN

The id of temperature sensor, 1 to 8

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.25728.8800.1.1.1

npThermoValue

Temperature, deg.C

Integer32

Constraints:
range: -60-280

.1.3.6.1.4.1.25728.8800.1.1.2

npThermoStatus

Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)

Enumeration

Enumerated Values:

0	failed
1	low
2	norm
3	high

.1.3.6.1.4.1.25728.8800.1.1.3

npThermoLow

Bottom margin of normal temperature range, deg.C

Integer32

Constraints:
range: -60-280

.1.3.6.1.4.1.25728.8800.1.1.4

npThermoHigh

Top margin of normal temperature range, deg.C

Integer32

Constraints:
range: -60-280

.1.3.6.1.4.1.25728.8800.1.1.5

npThermoMemo

T channel memo

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25728.8800.1.1.6

npThermoValuePrecise

Temperature, deg.C, with fractional part 3 digits after point

FixedPoint1000

.1.3.6.1.4.1.25728.8800.1.1.7

npIoTable

table

.1.3.6.1.4.1.25728.8900.1 · 1 row entry · 8 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npIoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npIoTable'

Digital Input/output Table

npIoEntry row .1.3.6.1.4.1.25728.8900.1.1

Digital Input/output Table Row

Indexes

npIoLineN

Column Syntax OID

npIoLineN

Number of IO line, from 1 to max supported

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.25728.8900.1.1.1

npIoLevelIn

Input level, 0 or 1

Integer32

Constraints:
range: 0-1

.1.3.6.1.4.1.25728.8900.1.1.2

npIoLevelOut

Output level, 0 or 1.
Write -1 to flip output.

Enumerationr/w

Enumerated Values:

-1	flip
0	low
1	high

.1.3.6.1.4.1.25728.8900.1.1.3

npIoMemo

IO line memo

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25728.8900.1.1.6

npIoLevelLegend

Legend for current logic level on the IO line

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25728.8900.1.1.7

npIoPulseCounter

Pulse Counter on IO input line (counts positive fronts)
Write 0 to reset.

SNMPv2-SMICounter32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25728.8900.1.1.9

npIoSinglePulseDuration

Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms

Integer32r/w

Constraints:
range: 100-25500

.1.3.6.1.4.1.25728.8900.1.1.12

npIoSinglePulseStart

Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25728.8900.1.1.13

npInTable

table

.1.3.6.1.4.1.25728.8910.1 · 1 row entry · 5 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npInTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npInTable'

Discrete Inputs Table

npInEntry row .1.3.6.1.4.1.25728.8910.1.1

Discrete Inputs Table Row

Indexes

npInLineN

Column	Syntax	OID
npInLineN Number of the Input, from 1 to max supported	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.25728.8910.1.1.1`
npInLevelIn Input level, 0 or 1	Integer32 Constraints: `range: 0-1`	`.1.3.6.1.4.1.25728.8910.1.1.2`
npInMemo Input memo	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.25728.8910.1.1.6`
npInLevelLegend Legend for current logic level on the Input	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.25728.8910.1.1.7`
npInPulseCounter Pulse Counter on the Input (counts positive fronts) Write 0 to reset.	SNMPv2-SMICounter32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25728.8910.1.1.9`

npOutTable

table

.1.3.6.1.4.1.25728.8920.1 · 1 row entry · 7 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npOutTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npOutTable'

Discrete Output Table

npOutEntry row .1.3.6.1.4.1.25728.8920.1.1

Discrete Output Table Row

Indexes

npOutLineN

Column Syntax OID

npOutLineN

Number of the Output, from 1 to max supported

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.25728.8920.1.1.1

npOutLevelOut

Output level, 0 or 1.
Write -1 to flip output.

Enumerationr/w

Enumerated Values:

-1	flip
0	low
1	high

.1.3.6.1.4.1.25728.8920.1.1.3

npOutMemo

Output line memo

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25728.8920.1.1.6

npOutLevelLegend

Legend for current logic level on the Output

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25728.8920.1.1.7

npOutPulseCounter

Pulse Counter on the Output line (counts positive fronts)
Write 0 to reset.

SNMPv2-SMICounter32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25728.8920.1.1.9

npOutSinglePulseDuration

Set duration of single pulse on the Output line,
100ms to 25500ms, min. step is 100ms

Integer32r/w

Constraints:
range: 100-25500

.1.3.6.1.4.1.25728.8920.1.1.12

npOutSinglePulseStart

Write 1 to start single pulse on the Output.
Output will be inverted for time, specified by npOutSinglePulseDuration

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25728.8920.1.1.13

npElecTable

table

.1.3.6.1.4.1.25728.9700.1 · 1 row entry · 5 columns

Open in standard view

Uses the netping variant from /opt/observium/mibs/netping.

Command help

Walk npElecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DKSF-57-1-X-X-1' -M '/opt/observium/mibs/netping:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DKSF-57-1-X-X-1::npElecTable'

Electricity Meter Table

npElecEntry row .1.3.6.1.4.1.25728.9700.1.1

Electricity Meter Table Table Row

Indexes

npElecIndex

Column	Syntax	OID
npElecIndex Number of elec.meter, associated with IO line	Integer32 Constraints: `range: 1-16`	`.1.3.6.1.4.1.25728.9700.1.1.1`
npElecPulsesPerKwh Pulses on IO line input per 1 kWh of consumed energy	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25728.9700.1.1.2`
npElecPower Power, Watts, based on pulse rate/interval, 5 minute average	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25728.9700.1.1.3`
npElecEnergy Energy counter, kWh, based on pulse count	SNMPv2-SMICounter32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25728.9700.1.1.4`
npElecEnergy100 Energy counter, kWh*100, based on pulse count	SNMPv2-SMICounter32r/w Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25728.9700.1.1.5`