DIFFSERV-CONFIG-MIB
This MIB module contains differentiated services
specific managed objects to perform higher-level
configuration management. This MIB allows policies
to use 'templates' to instantiate Differentiated
Services functional datapath configurations to
be assigned (associated with an interface and
direction) when a policy is activated.
Copyright (C) The Internet Society (2004). This version
of this MIB module is part of RFC 3747; see the RFC
itself for full legal notices.
- Source file
DIFFSERV-CONFIG-MIB- Last revised
- Identity
diffServConfigMib- Base OID
1.3.6.1.2.1.108
Imported Objects
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) zeroDotZero |
| SNMPv2-TC | DateAndTime RowPointer RowStatus StorageType |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DIFFSERV-CONFIG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DIFFSERV-CONFIG-MIB::diffServConfigMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DIFFSERV-CONFIG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DIFFSERV-CONFIG-MIB::diffServConfigMib'
Objects (14)
Showing 14 of 14 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.108 |
||
.1.3.6.1.2.1.108.1 |
||
.1.3.6.1.2.1.108.1.2 |
||
.1.3.6.1.2.1.108.1.2.1 |
||
|
OctetString
|
.1.3.6.1.2.1.108.1.2.1.1 |
|
.1.3.6.1.2.1.108.1.2.1.2 |
||
.1.3.6.1.2.1.108.1.2.1.3 |
||
.1.3.6.1.2.1.108.1.2.1.4 |
||
.1.3.6.1.2.1.108.1.2.1.5 |
||
.1.3.6.1.2.1.108.1.2.1.6 |
||
.1.3.6.1.2.1.108.1.2.1.7 |
||
.1.3.6.1.2.1.108.2 |
||
.1.3.6.1.2.1.108.2.1 |
||
.1.3.6.1.2.1.108.2.2 |
Dependencies (4) 4 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- DIFFSERV-CONFIG-MIBrfcselected
Conformance Groups (1)
|
diffServConfigDescr diffServConfigOwner diffServConfigLastChange diffServConfigStart diffServConfigStorage diffServConfigStatus
The per-hop-behavior Group defines the MIB objects that
describe the configuration template for the per-hop-behavior. |
.1.3.6.1.2.1.108.2.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.2.1.108.2.1.1The full compliance for this MIB module.
For this compliance level the 'diffServMIBFullCompliance'
must be met, since this MIB module depends on it in order
to provide the configuration entries.
For this compliance level the 'diffServMIBFullCompliance'
must be met, since this MIB module depends on it in order
to provide the configuration entries.
Required groups
| mandatory | diffServConfigMIBConfigGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| diffServConfigStatus |
active(1)
|
Support for createAndWait and notInService is not required. |