DHCP-RELAY-MGMT-MIB Table View

This table indicates the IP address as a destination to forward
(relay) DHCP packets to.

swDHCPRelayCtrlEntry row .1.3.6.1.4.1.171.12.42.3.1.1

A list of information indicates the IP address as a destination
to forward (relay) DHCP packets to.

Indexes

swDHCPRelayCtrlInterfaceName swDHCPRelayCtrlServer

Column	Syntax	OID
swDHCPRelayCtrlInterfaceName This object indicates the name of the IP interface.	RFC1213-MIBDisplayString Constraints: range: 0-12	.1.3.6.1.4.1.171.12.42.3.1.1.1
swDHCPRelayCtrlServer This object indicates the DHCP server IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.42.3.1.1.2
swDHCPRelayCtrlRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.42.3.1.1.3

This table is used to manage the DHCP relay Option82 Remote ID
for each client.And this configure will override the configure of
swDHCPRelayOption82RemoteId for this client.

swDHCPRelayOption82PerPortRemoteIdEntry row .1.3.6.1.4.1.171.12.42.3.2.8.1

This object lists indicates the DHCP relay Option82 Remote ID
for each client.

Indexes

swDHCPRelayOption82PerPortRemoteIdPortIndex

Column	Syntax	OID
swDHCPRelayOption82PerPortRemoteIdPortIndex This object indicates the Client's port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.42.3.2.8.1.1
swDHCPRelayOption82PerPortRemoteIdType This object indicates the type of port's remote ID. If the type is vendor3, the remote ID can be defined by writing to the swDHCPRelayOption82PerPortRemoteIdValue object.	Enumerationr/w Enumerated Values: 5 vendor3	.1.3.6.1.4.1.171.12.42.3.2.8.1.2
swDHCPRelayOption82PerPortRemoteIdValue This object displays the current remote ID of the special port. If swDHCPRelayOption82PerPortRemoteIdType is set to vendor3,a new value can be written to this object.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.171.12.42.3.2.8.1.3

This table is used to manage the DHCP relay Option82 Circuit ID 
for each client.And this configure will override the configure of
swDHCPRelayOption82CircuitId for this client.

swDHCPRelayOption82PerPortCircuitIdEntry row .1.3.6.1.4.1.171.12.42.3.2.9.1

This object lists indicates the DHCP relay Option82 Circuit ID for
each client.

Indexes

swDHCPRelayOption82PerPortCircuitIdPortIndex

Column	Syntax	OID
swDHCPRelayOption82PerPortCircuitIdPortIndex This object indicates the module's port number.(1..Max port number in the module)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.42.3.2.9.1.1
swDHCPRelayOption82PerPortCircuitIdType This object indicates the type of client's circuit ID.If the type is vendor3,the circuit ID can be defined by writing to the swDHCPRelayOption82PerPortCircuitIdValue object.	Enumerationr/w Enumerated Values: 5 vendor3	.1.3.6.1.4.1.171.12.42.3.2.9.1.2
swDHCPRelayOption82PerPortCircuitIdValue This object displays the current circuit ID of client. If swDHCPRelayOption82PerPortCircuitIdType is set to vendor3, a new value can be written to this object.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.171.12.42.3.2.9.1.3

This table indicates the default relay servers for the packet
that has no option 60 matching rules.

swDHCPRelayOption60DefEntry row .1.3.6.1.4.1.171.12.42.3.3.3.1

A list of information indicates the default relay servers for the packet
that has no option 60 matching rules.

Indexes

swDHCPRelayOption60DefRelayIp

Column	Syntax	OID
swDHCPRelayOption60DefRelayIp This object indicates the IP address of the default relay server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.42.3.3.3.1.1
swDHCPRelayOption60DefRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.42.3.3.3.1.2

This table indicates the relay servers for the packet for option 60 rules.

swDHCPRelayOption60Entry row .1.3.6.1.4.1.171.12.42.3.3.4.1

A list of information indicates the relay servers for the packet
for option 60 rules.

Indexes

swDHCPRelayOption60String swDHCPRelayOption60RelayIp

Column	Syntax	OID
swDHCPRelayOption60String This object indicates the string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in …	RFC1213-MIBDisplayString	.1.3.6.1.4.1.171.12.42.3.3.4.1.1
swDHCPRelayOption60RelayIp This object indicates the IP address of the relay server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.42.3.3.4.1.2
swDHCPRelayOption60MatchType This object indicates the match state of this entry. exact (1): Means the option 60 string in the packet must fully match the specified string. partial (2): Means the option 60 string in the packet only …	Enumerationr/w Enumerated Values: 1 exact 2 partial	.1.3.6.1.4.1.171.12.42.3.3.4.1.3
swDHCPRelayOption60RowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.42.3.3.4.1.4

This table indicates the relay servers for the packet for option 61 rules.

swDHCPRelayOption61Entry row .1.3.6.1.4.1.171.12.42.3.4.4.1

A list of information indicates the relay servers for the packet
for option 61 rules.

Indexes

swDHCPRelayOption61ClientType swDHCPRelayOption61ClientID

Column	Syntax	OID
swDHCPRelayOption61ClientType This object indicates the client type of this entry. mac (1): Means the client-ID which is the MAC address of a client. string (2): Means the client-ID which is specified string by an administrator.	Enumeration Enumerated Values: 1 mac 2 string	.1.3.6.1.4.1.171.12.42.3.4.4.1.1
swDHCPRelayOption61ClientID This object indicates the string of this entry. Note: When the swDHCPRelayOption61ClientType is mac (1), the format of this object should be XX.XX.XX.XX.XX.XX (MAC address). When the swDHCP…	RFC1213-MIBDisplayString	.1.3.6.1.4.1.171.12.42.3.4.4.1.2
swDHCPRelayOption61Mode This object indicates mode of this entry. relay (1): Means to relay the packet to the IP address which is specified by swDHCPRelayOption61RelayIp. drop (2): Means to drop the packet.	Enumerationr/w Enumerated Values: 1 relay 2 drop	.1.3.6.1.4.1.171.12.42.3.4.4.1.3
swDHCPRelayOption61RelayIp This object indicates the IP address of the relay server. Pay attention to when swDHCPRelayOption61Mode is: relay (1): This object must be set together. drop (2): This object can not be set, and it always…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.12.42.3.4.4.1.4
swDHCPRelayOption61RowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.42.3.4.4.1.5

This table indicates the IP address as a destination to forward
(relay) DHCP packets to.

swDHCPRelayVlanCtrlEntry row .1.3.6.1.4.1.171.12.42.3.5.1

A list of information indicates the IP address as a destination
to forward (relay) DHCP packets to.

Indexes

swDHCPRelayVlanCtrlServer

Column	Syntax	OID
swDHCPRelayVlanCtrlServer This object indicates the DHCP server IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.42.3.5.1.1
swDHCPRelayVlanCtrlVlanRangeList1to64 This object indicates the VLAN range (1-512) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.2
swDHCPRelayVlanCtrlVlanRangeList65to128 This object indicates the VLAN range (513-1024) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.3
swDHCPRelayVlanCtrlVlanRangeList129to192 This object indicates the VLAN range (1025-1536) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.4
swDHCPRelayVlanCtrlVlanRangeList193to256 This object indicates the VLAN range (1537-2048) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.5
swDHCPRelayVlanCtrlVlanRangeList257to320 This object indicates the VLAN range (2049-2560) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.6
swDHCPRelayVlanCtrlVlanRangeList321to384 This object indicates the VLAN range (2561-3072) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.7
swDHCPRelayVlanCtrlVlanRangeList385to448 This object indicates the VLAN range (3073-3584) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.8
swDHCPRelayVlanCtrlVlanRangeList449to512 This object indicates the VLAN range (3585-4096) that added the specific server.	OctetStringr/w Constraints: range: 64-64	.1.3.6.1.4.1.171.12.42.3.5.1.9
swDHCPRelayVlanCtrlRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.42.3.5.1.10

This table is used to manage the DHCP relay state
for each port.

swDHCPRelayPortStateCtrlEntry row .1.3.6.1.4.1.171.12.42.3.6.1

This object lists the current ports in the switch and their
corresponding DHCP relay state.

Indexes

swDHCPRelayPortStateCtrlPortIndex

Column	Syntax	OID
swDHCPRelayPortStateCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.42.3.6.1.1
swDHCPRelayPortStateCtrlState This object indicates the state of the DHCP relay of each port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.42.3.6.1.2

This table is used to manage the DHCP relay send ARP to DHCP Server include the inner vid.

swDHCPRelaySendArpByCidEntry row .1.3.6.1.4.1.171.12.42.3.7.1

This object lists the current each DHCP Server configuration inner vid.

Indexes

swDHCPRelayCtrlServer

Column	Syntax	OID
swDHCPRelaySendArpByCidInnerVid This object indicates the inner vid or null vid. 0: not insert inner vid. 1-4094: inner vid.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.171.12.42.3.7.1.1

This table is used to manage the DHCP local relay status
for each VLAN.

swDHCPLocalRelayVlanEntry row .1.3.6.1.4.1.171.12.42.4.2.1

This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.

Indexes

swDHCPLocalRelayVlanID

Column	Syntax	OID
swDHCPLocalRelayVlanID This object indicates the VLAN ID.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.12.42.4.2.1.1
swDHCPLocalRelayState This object indicates the state of the DHCP relay function of the specified VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.42.4.2.1.2

This table is used to manage the DHCP local relay option 82 policy
for each port.

swDHCPLocalRelayOption82Entry row .1.3.6.1.4.1.171.12.42.4.3.1

This object lists the current ports in the switch and their
corresponding DHCP local relay option 82 policy.

Indexes

swDHCPLocalRelayOption82PortIndex

Column	Syntax	OID
swDHCPLocalRelayOption82PortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.42.4.3.1.1
swDHCPLocalRelayOption82Policy This object indicates the policy of the DHCP local relay option 82 of each port.	Enumerationr/w Enumerated Values: 1 replace 2 drop 3 keep	.1.3.6.1.4.1.171.12.42.4.3.1.2