DHCP-CLIENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
21

rcDhcpClientRequestTable

table
.1.3.6.1.4.1.8886.6.1.25.1.1 · 1 row entry · 21 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk rcDhcpClientRequestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DHCP-CLIENT-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DHCP-CLIENT-MIB::rcDhcpClientRequestTable' 
A table provides the mechanism to control DHCP Client per ip interface.
rcDhcpClientRequestEntry row .1.3.6.1.4.1.8886.6.1.25.1.1.1
Table entry for dhcp client request table based on ip interface.
Indexes
Column Syntax OID
rcDhcpClientRequestIfIndex
An index that uniquely identifies an ip interface which
dhcp client is in. Its value is always MAX_PORT_NUM + 1 currently.
'MAX_PORT_NUM' is the PHY port number of a switch.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.1
rcDhcpClientRequestHostname
This object specifies the hostname of dhcp client.
Its default value is 'Raisecom'
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.2
rcDhcpClientRequestClassid
This object specifies the class identifier of dhcp client.
Its default value is 'Raisecom-ROS_VERSION'. 'ROS_VERSION'
is the plat version for ROS.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.3
rcDhcpClientRequestClientid
This object specifies the client identifier of dhcp client.
Its default value is 'Raisecom-SYS_MAC-IF0'. 'SYS_MAX' is
the MacAddress of the switch.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.4
rcDhcpClientRequestVlansdeprecated
The object indicates the vlans which dhcp client is in.
If it takes set operation on this node, it should take
the set operation(value request(2)) on node
rcDhcpClientRequestOperationType together.
SWITCH-TCVlansetr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.5
rcDhcpClientRequestOperationType
The object indicates the dhcp client operation type.
The type none(1) is just for the get operation(that is, when get
operation on this node, it always returns none(1)),
type request(2) indicates that dhcp client starts…
Enumerationr/w
Enumerated Values:
1none
2request
3renew
4release
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.6
rcDhcpClientRequestOperationStates
The object indicates the dhcp client operation states.
The state initialize(1) indicates that no dhcp client operation
is done before, state requesting (2) indicates that dhcp client
is requesting ip address, state requ…
Enumeration
Enumerated Values:
1initialize
2requesting
3requestsuccessfully
4requestgetfailed
5requestconfigfailed
6renewing
7renewsuccessfully
8renewfailed
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.7
rcDhcpClientRequestIpAddress
The object indicates the ip address which dhcp client requires from dhcp server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.8
rcDhcpClientRequestDefaultGateway
The object indicates the default gateway address which dhcp client requires from dhcp server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.9
rcDhcpClientRequestSubnetMask
The object indicates the subnet mask address which dhcp client requires from dhcp server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.10
rcDhcpClientRequestLeaseStarts
The object indicates the lease start time which dhcp client requires from dhcp server.
Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.11
rcDhcpClientRequestLeaseEnds
The object indicates the lease expire time which dhcp client requires from dhcp server.
Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.12
rcDhcpClientRequestLeaseDuration
The object indicates the lease duration which dhcp client requires from dhcp server.
Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.13
rcDhcpClientRequestDhcpSvr
The object indicates the dhcp server which dhcp client requires ip address from.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.14
rcDhcpClientRequestTftpSvrName
The object indicates the tftp server name which dhcp client requires from dhcp server.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.15
rcDhcpClientRequestTftpSvrAddr
The object indicates the tftp server address which dhcp client requires from dhcp server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.16
rcDhcpClientRequestStartupConfFile
The object indicates the startup configuration file name which dhcp client requires from dhcp server.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.17
rcDhcpClientRequestResultStates
The object indicates the current states of dhcp client request information.
The state unavailable(1) indicates that dhcp client request information
isn't available currently while state available(2) indicates that dhcp …
Enumeration
Enumerated Values:
1unavailable
2available
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.18
rcDhcpClientRequestSpecifySvr
The object indicates the dhcp server which dhcp client specified.
Its default value is (0.0.0.0).
The value(0.0.0.0) indicates that dhcp client doesn't specify any dhcp server.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.19
rcDhcpClientRequestRootPath
This option specifies the path-name that contains the client's root
disk. The path is formatted as a character string consisting of
characters from the NVT ASCII character set
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.20
rcDhcpClientRequestNtpServer
This option specifies first NTP server ip address in NTP
servers available to the client.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8886.6.1.25.1.1.1.21