DGS3627-L2MGMT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
39
Rows
39
Columns
197
swDevModuleInfoTable
table.1.3.6.1.4.1.171.11.70.6.2.1.1.3
·
1 row entry
·
6 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swDevModuleInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swDevModuleInfoTable'
This table contains the module information.
A list of management information for each unit in the system.
| Column | Syntax | OID |
|---|---|---|
| swDevModuleInfoUnitIDThis object indicates the specific unit ID in the stacking/chassis table. | Integer32 Constraints: range: 1-12 | .1.3.6.1.4.1.171.11.70.6.2.1.1.3.1.1 |
| swDevModuleInfoModuleIDThis object indicates the module ID of this unit. | Integer32 Constraints: range: 1-8 | .1.3.6.1.4.1.171.11.70.6.2.1.1.3.1.2 |
| swDevModuleInfoModuleNameA textual string containing name of the the module. | OctetString Constraints: range: 0-12 | .1.3.6.1.4.1.171.11.70.6.2.1.1.3.1.3 |
| swDevModuleInfoReversionA textual string containing reversion of the module. | OctetString Constraints: range: 0-4 | .1.3.6.1.4.1.171.11.70.6.2.1.1.3.1.4 |
| swDevModuleInfoSerialA textual string containing serial of the module. | OctetString Constraints: range: 0-9 | .1.3.6.1.4.1.171.11.70.6.2.1.1.3.1.5 |
| swDevModuleInfoDescriptionA textual string containing description of the module. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.70.6.2.1.1.3.1.6 |
swL2MultiFilterTable
table.1.3.6.1.4.1.171.11.70.6.2.2.1
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2MultiFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2MultiFilterTable'
A table that contains infomation about vlan multicast filter mode.
A list of multicast filter mode information for each vlan.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2MultiFilterVidvid for each vlan | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.70.6.2.2.1.1.1 | ||||||
| swL2MultiFilterModevlan multicast filter mode. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.2.1.1.2 |
swL2PortInfoTable
table.1.3.6.1.4.1.171.11.70.6.2.3.1
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2PortInfoTable'
A table that contains information about every port.
A list of information for each port of the device.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortInfoPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.1.1.1 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoMediumTypeIndicates medium type of the port number. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.1.1.2 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoUnitIDIndicates ID of the unit in the system | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.1.1.3 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoTypeThis object indicates the connector type of this port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.1.1.4 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoLinkStatusThis object indicates the port link status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.1.1.5 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoNwayStatusThis object indicates the port speed and duplex mode. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.1.1.6 | ||||||||||||||||||||||||||||||||||||||
| swL2PortInfoErrDisReasonThis object indicates the port if disabled and why error disabled. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.1.1.7 |
swL2PortCtrlTable
table.1.3.6.1.4.1.171.11.70.6.2.3.2
·
1 row entry
·
10 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2PortCtrlTable'
A table that contains control information about every port.
A list of control information for each port of the device.
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortCtrlPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.2.1.1 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlMediumTypeIndicates medium type of the port number. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.2 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlUnitIndexIndicates ID of the unit in the device | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.2.1.3 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlAdminStateThis object decide the port enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.4 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlNwayStateChose the port speed, duplex mode, and N-Way function mode. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.5 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlFlowCtrlStateThe flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames a… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.6 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlLockStateThis object decide the port is locked or not. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.7 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlMACNotifyStateThis object set each port MAC notification state. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.8 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlAutoNegRestartIf the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.11 | ||||||||||||||||||||||||||||||||
| swL2PortCtrlAutoNegCapAdvertisedBitsA value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot … | IANAifMauAutoNegCapBitsr/w Type Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.2.1.12 |
swL2PortAutoNegInfoTable
table.1.3.6.1.4.1.171.11.70.6.2.3.8
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortAutoNegInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2PortAutoNegInfoTable'
A table that contains information about every port's auto negotiation status.
A list of information for each port auto negotiation of the device.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortAutoNegInfoPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.8.1.1 | ||||||||||||||||||||||||||||||||
| swL2PortAutoNegInfoAdminStatusIf the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL2PortCtrlNwayState. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.8.1.2 | ||||||||||||||||||||||||||||||||
| swL2PortAutoNegInfoCapabilityBitsA value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. … | IANAifMauAutoNegCapBits Type Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.8.1.3 | ||||||||||||||||||||||||||||||||
| swL2PortAutoNegInfoCapAdvertisedBitsA value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegCapabilityBits cannot be en… | IANAifMauAutoNegCapBits Type Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.8.1.4 | ||||||||||||||||||||||||||||||||
| swL2PortAutoNegInfoCapReceivedBitsA value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entiti… | IANAifMauAutoNegCapBits Type Values:
| .1.3.6.1.4.1.171.11.70.6.2.3.8.1.5 |
swL2PortDropCounterTable
table.1.3.6.1.4.1.171.11.70.6.2.3.9
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortDropCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2PortDropCounterTable'
A table that contains information for each port drop counter.
A list of information for each port auto negotiation of the device.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2PortDropCounterPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.9.1.1 |
| swL2PortBufferFullDropsThe total number of packets discarded while buffer full. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.9.1.2 |
| swL2PortACLDropsThe total number of packets denied by ACLs. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.9.1.3 |
| swL2PortMulticastDropsThe total number of multicast packet that is discarded. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.9.1.4 |
| swL2PortVLANIngressDropsThe total number of packets discarded by VLAN ingress checking. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.9.1.5 |
swL2PortStatisTable
table.1.3.6.1.4.1.171.11.70.6.2.3.10
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortStatisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2PortStatisTable'
A table that contains information for each port 1519-9216 counter.
A list of information for each port counter of the device.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2PortStatisPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.10.1.1 |
| swL2PortStatisPkts1519to1522OctetsThe total number of packets length 1519-1522. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.10.1.2 |
| swL2PortStatisPkts1519to2047OctetsThe total number of packets length 1519-1522. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.10.1.3 |
| swL2PortStatisPkts2048to4095OctetsThe total number of packets length 2048-4095. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.10.1.4 |
| swL2PortStatisPkts4096to9216OctetsThe total number of packets length 4096-9216. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.171.11.70.6.2.3.10.1.5 |
swL2PortSfpInfoTable
table.1.3.6.1.4.1.171.11.70.6.2.3.11
·
1 row entry
·
11 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortSfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2PortSfpInfoTable'
A table that contains information for each sfp pluged in port.
A list of information for each sfp pluged in port.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2PortSfpInfoPortIndexThis object indicates the module's port number.(1..Max port number in the module) | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.1 |
| swL2PortSfpInfoConnectTypeThe ConnectType of sfp informaiton. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.2 |
| swL2PortSfpInfoVendorNameThe vendor name of sfp informaiton. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.3 |
| swL2PortSfpInfoVendorPNThe vendor PN of sfp informaiton. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.4 |
| swL2PortSfpInfoVendorSNThe vendor SN of sfp informaiton. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.5 |
| swL2PortSfpInfoVendorOUIThe vendor OUI of sfp information. | OctetString Constraints: range: 1-6 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.6 |
| swL2PortSfpInfoVendorRevThe vendor Rev of sfp information. | OctetString Constraints: range: 1-4 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.7 |
| swL2PortSfpInfoDateCodeThe date code of sfp information. | OctetString Constraints: range: 1-8 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.8 |
| swL2PortSfpInfoFiberTypeThe fiber type of sfp information. | OctetString Constraints: range: 1-16 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.9 |
| swL2PortSfpInfoBaudRateThe baud rate of sfp information. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.10 |
| swL2PortSfpInfoWavelengthThe wavelength of sfp information. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.3.11.1.11 |
.1.3.6.1.4.1.171.11.70.6.2.6.1
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSBandwidthControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2QOSBandwidthControlTable'
.
A list of information contained in swL2QOSBandwidthControlTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOSBandwidthPortIndexIndicates the port . | Integer32 Constraints: range: 1-768 | .1.3.6.1.4.1.171.11.70.6.2.6.1.1.1 |
| swL2QOSBandwidthRxRateIndicates RX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit. | Integer32r/w Constraints: range: 64-10000000 | .1.3.6.1.4.1.171.11.70.6.2.6.1.1.2 |
| swL2QOSBandwidthTxRateIndicates TX Rate(1kbit/sec) of the specifed port. Value 10000000 means no limit. | Integer32r/w Constraints: range: 64-10000000 | .1.3.6.1.4.1.171.11.70.6.2.6.1.1.3 |
| swL2QOSBandwidthRadiusRxRateThe Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.6.1.1.4 |
| swL2QOSBandwidthRadiusTxRateThe Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.6.1.1.5 |
swL2QOSSchedulingTable
table.1.3.6.1.4.1.171.11.70.6.2.6.2
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOSSchedulingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2QOSSchedulingTable'
.
A list of information contained in swL2QOSSchedulingTable.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2QOSSchedulingPortIndicates the port number. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.6.2.1.1 | ||||
| swL2QOSSchedulingClassIDIndicates the hardware queue number. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.70.6.2.6.2.1.2 | ||||
| swL2QOSSchedulingMaxPktsIndicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified. | Integer32r/w Constraints: range: 0-15 | .1.3.6.1.4.1.171.11.70.6.2.6.2.1.3 | ||||
| swL2QOSSchedulingMechanismIndicates the mechanism of QOS scheduling. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.6.2.1.4 | ||||
| swL2QOSSchedulingMechanismEffecIndicates the effective mechanism of QoS scheduling. If the swQoSSchedulingWeight is configured to be 0, then this object will always display strict (1). | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.6.2.1.5 |
.1.3.6.1.4.1.171.11.70.6.2.6.3
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pUserPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2QOS8021pUserPriorityTable'
.
A list of information contained in swL2QOS8021pUserPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pUserPriorityIndexThe 802.1p user priority . | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.70.6.2.6.3.1.1 |
| swL2QOS8021pUserPriorityClassThe number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority). | Integer32r/w Constraints: range: 0-6 | .1.3.6.1.4.1.171.11.70.6.2.6.3.1.2 |
.1.3.6.1.4.1.171.11.70.6.2.6.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2QOS8021pDefaultPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2QOS8021pDefaultPriorityTable'
.
A list of information contained in swL2QOS8021pDefaultPriorityTable.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2QOS8021pDefaultPriorityIndexIndicates the port number . | Integer32 Constraints: range: 1-768 | .1.3.6.1.4.1.171.11.70.6.2.6.4.1.1 |
| swL2QOS8021pDefaultPriorityThe priority value to assign to untagged packets received by the switch ports on the switch.. | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.70.6.2.6.4.1.2 |
| swL2QOS8021pRadiusPriorityIndicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.6.4.1.3 |
.1.3.6.1.4.1.171.11.70.6.2.6.7
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swCosBandwidthControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swCosBandwidthControlTable'
A table that contains information about CoS Bandwidth Control on each port.
A list that contains CoS Bandwidth Control information
for each port.
for each port.
| Column | Syntax | OID |
|---|---|---|
| swCosBandwidthPortThis object indicates the port number. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.6.7.1.1 |
| swCosBandwidthClassIDIndicates the hardware queue number. | Integer32 Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.70.6.2.6.7.1.2 |
| swCosBandwidthMinRateIndicates the Minimum Rate of the specified port. A value of 0 means no limit. | Integer32r/w Constraints: range: 0-0range: 64-10000000 | .1.3.6.1.4.1.171.11.70.6.2.6.7.1.3 |
| swCosBandwidthMaxRateIndicates the Maximum Rate of the specified port. A value of 0 means no limit. | Integer32r/w Constraints: range: 0-0range: 64-10000000 | .1.3.6.1.4.1.171.11.70.6.2.6.7.1.4 |
swCpuRxRateControlTable
table.1.3.6.1.4.1.171.11.70.6.2.6.8
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swCpuRxRateControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swCpuRxRateControlTable'
A table that contains information about CPU receiving rate control.
A list that contains CPU CoS receiving rate control information.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swCpuRxClassIDIndicates the Class of Service ID. | Integer32 Constraints: range: 0-2 | .1.3.6.1.4.1.171.11.70.6.2.6.8.1.1 | ||||
| swCpuRxRateControlStatusIndicates the status of receiving rate control. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.6.8.1.2 |
.1.3.6.1.4.1.171.11.70.6.2.6.9
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swQosDscpTrustPortCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swQosDscpTrustPortCtrlTable'
A table that contains information about the DSCP trust portlist.
A list that contains the DSCP trusted state per port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swQosDscpTrustPortCtrlPortIndexThis object indicates the port number. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.6.9.1.1 | ||||
| swQosDscpTrustPortCtrlStateThis object is used to enable/disable the DSCP trusted state on a selected port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.6.9.1.2 |
.1.3.6.1.4.1.171.11.70.6.2.6.10
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swQosDscpMapGlobalCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swQosDscpMapGlobalCtrlTable'
A table that contains information about DSCP map to priority and packet color on each port.
A list that contains DSCP map information
for each port.
for each port.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swQosDscpMapGlobalCtrlDscpIndexThis object indicates the source DSCP incoming packet. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.6.10.1.1 |
| swQosDscpMapGlobalCtrl8021pPriorityThis object indicates the 802.1p priority on each port. Default value is: DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7 | Integer32r/w Constraints: range: 0-7 | .1.3.6.1.4.1.171.11.70.6.2.6.10.1.2 |
| swQosDscpMapGlobalCtrlNewDscpThis object indicates the new DSCP map on each port. | Integer32r/w Constraints: range: 0-63 | .1.3.6.1.4.1.171.11.70.6.2.6.10.1.3 |
.1.3.6.1.4.1.171.11.70.6.2.7.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2PortSecurityControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2PortSecurityControlTable'
port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reach N, any coming packet with not learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
A list of information contained in swL2PortSecurityControlTable.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2PortSecurityPortIndexIndicates the secured port to lock address learning. | Integer32 Constraints: range: 1-768 | .1.3.6.1.4.1.171.11.70.6.2.7.1.1.1 | ||||||||
| swL2PortSecurityMaxLernAddrIndicates allowable number of addresses to be learned at this port. | Integer32r/w Constraints: range: 0-64 | .1.3.6.1.4.1.171.11.70.6.2.7.1.1.2 | ||||||||
| swL2PortSecurityModeIndicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.7.1.1.3 | ||||||||
| swL2PortSecurityAdmStateIndicates administration state of locking address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.7.1.1.4 |
swL2TrunkCtrlTable
table.1.3.6.1.4.1.171.11.70.6.2.9.3
·
1 row entry
·
7 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2TrunkCtrlTable'
This table specifys which ports group a set of ports(up to 8) into a single logical link.
A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.
ports(up to 8) into a single logical link.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2TrunkIndexThe index of logical port trunk. The trunk group number depend on the existence of unit and module. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.9.3.1.1 | ||||||||||||
| swL2TrunkMasterPortThe object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port… | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.70.6.2.9.3.1.3 | ||||||||||||
| swL2TrunkMemberIndicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 8 for one trunks. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.9.3.1.4 | ||||||||||||
| swL2TrunkFloodingPortThe object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.70.6.2.9.3.1.5 | ||||||||||||
| swL2TrunkTypeThis object indicated that type of the trunk group. static : is static trunk group lacp : is LACP trunk group . | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.9.3.1.6 | ||||||||||||
| swL2TrunkStateThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.70.6.2.9.3.1.7 | ||||||||||||
| swL2TrunkActivePortsThe object indicates the active ports of the port trunk entry. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.9.3.1.8 |
swL2TrunkLACPPortTable
table.1.3.6.1.4.1.171.11.70.6.2.9.5
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkLACPPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2TrunkLACPPortTable'
This table specifys which ports group a set of ports(up to 8) into a single logical link.
A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.
ports(up to 8) into a single logical link.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2TrunkLACPPortIndexThe index of logical port lacp. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.9.5.1.1 | ||||
| swL2TrunkLACPPortStateThe state of logical port lacp. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.9.5.1.2 |
swL2TrunkVLANTable
table.1.3.6.1.4.1.171.11.70.6.2.9.6
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrunkVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2TrunkVLANTable'
This table is used to manage the VLAN trunking feature of the device.
This object is used to configure the VLAN trunking settings for each port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| swL2TrunkVLANPortThis object indicates the port being configured. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.9.6.1.1 | ||||
| swL2TrunkVLANStateThe state of the logical port LACP. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.9.6.1.2 |
swL2MirrorGroupTable
table.1.3.6.1.4.1.171.11.70.6.2.10.5
·
1 row entry
·
6 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2MirrorGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2MirrorGroupTable'
This table specifies information about the Mirror group configuration.
A list of information about each Mirror group configuration.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2MirrorGroupIDThis object indicates the mirror group. The range of this object is (1..n), the value of n depends on detail project. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.171.11.70.6.2.10.5.1.1 | ||||||||||||
| swL2MirrorGroupRowStatusThis object manages this mirror group entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.70.6.2.10.5.1.2 | ||||||||||||
| swL2MirrorGroupStateThis object indicates the mirror group state. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.10.5.1.3 | ||||||||||||
| swL2MirrorGroupLogicTargetPortThis object indicates the mirror group target port. | Integer32r/w Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.10.5.1.4 | ||||||||||||
| swL2MirrorGroupPortSourceIngressThis object indicates the mirror group ingress source ports. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.10.5.1.5 | ||||||||||||
| swL2MirrorGroupPortSourceEngressThis object indicates the mirror group engress source ports. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.10.5.1.6 |
swL2IGMPCtrlTable
table.1.3.6.1.4.1.171.11.70.6.2.11.3
·
1 row entry
·
14 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPCtrlTable'
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2IGMPCtrlVidThis object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If … | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.1 | ||||||
| swL2IGMPQueryIntervalThe frequency at which IGMP Host-Query packets are transmitted on this switch. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.2 | ||||||
| swL2IGMPMaxResponseTimeThe maximum query response time on this switch. | Integer32r/w Constraints: range: 1-25 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.3 | ||||||
| swL2IGMPRobustnessThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. | Integer32r/w Constraints: range: 1-255 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.4 | ||||||
| swL2IGMPLastMemberQueryIntervalThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. | Integer32r/w Constraints: range: 1-25 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.5 | ||||||
| swL2IGMPHostTimeoutThe timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please refere… | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.6 | ||||||
| swL2IGMPRouteTimeoutThe Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.7 | ||||||
| swL2IGMPLeaveTimerWhen a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left. | Integer32r/w Constraints: range: 1-16711450 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.8 | ||||||
| swL2IGMPQueryStateThis object decide the IGMP query enabled or disabled. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.3.1.9 | ||||||
| swL2IGMPCurrentStateThis object indicates the current IGMP query state. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.3.1.10 | ||||||
| swL2IGMPCtrlStateThis object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.3.1.11 | ||||||
| swL2IGMPFastLeaveStateThis object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following value… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.3.1.12 | ||||||
| swL2IGMPQueryVersionConfigure the IGMP version of query packet which will be sent by the router. | Integer32r/w Constraints: range: 1-3 | .1.3.6.1.4.1.171.11.70.6.2.11.3.1.13 | ||||||
| swL2IGMPReportSuppressionWhen enabled, multiple IGMP reports or leaves for a specific group (S,G) will be integrated into only one report before being sent to the router port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.3.1.15 |
swL2IGMPQueryInfoTable
table.1.3.6.1.4.1.171.11.70.6.2.11.4
·
1 row entry
·
3 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPQueryInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPQueryInfoTable'
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPInfoVidThis object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable). | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.4.1.1 |
| swL2IGMPInfoQueryCountThis object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.4.1.2 |
| swL2IGMPInfoTxQueryCountThis object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.4.1.3 |
swL2IGMPInfoTable
table.1.3.6.1.4.1.171.11.70.6.2.11.5
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPInfoTable'
The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
Information about current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled.
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPVidThis object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.5.1.1 |
| swL2IGMPGroupIpAddrThis object is identify group ip address which is captured from IGMP packet, in per-Vlan basis. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.5.1.2 |
| swL2IGMPMacAddrThis object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis. | MacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.171.11.70.6.2.11.5.1.3 |
| swL2IGMPPortMapThis object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered p… | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.5.1.4 |
| swL2IGMPIpGroupReportCountThis object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.5.1.5 |
swL2IGMPRouterPortsTable
table.1.3.6.1.4.1.171.11.70.6.2.11.6
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPRouterPortsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPRouterPortsTable'
The table controls the Vlan's IGMP router ports function.
The entry in IGMP router ports table (swL2IGMPRouterPortsTable).
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPRouterPortsVidThis object indicates the IGMP router ports entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form… | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.6.1.1 |
| swL2IGMPRouterStaticPortList | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.6.1.2 |
| swL2IGMPRouterDynamicPortList | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.6.1.3 |
| swL2IGMPRouterForbiddenPortList | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.6.1.4 |
.1.3.6.1.4.1.171.11.70.6.2.11.7
·
1 row entry
·
13 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPMulticastVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPMulticastVlanTable'
The information of the IGMP snooping multicast vlan table.
The entry of swL2IGMPMulticastVlanTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2IGMPMulticastVlanidThis object indicates the vlan id of the IGMP snooping multicast vlan entry. | Integer32 Constraints: range: 2-4094 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.1 | ||||||||||||
| swL2IGMPMulticastVlanNameThis object indicates the vlan name of the IGMP snooping multicast vlan entry. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.2 | ||||||||||||
| swL2IGMPMulticastVlanSourcePortThis object indicate the portlist of the source ports of IGMP snooping multicast vlan. The source ports will be set as tag ports of the vlan entry. And the IGMP control messages received from the member ports would be… | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.3 | ||||||||||||
| swL2IGMPMulticastVlanMemberPortThis object indicate the portlist of the member ports of IGMP snooping multicast vlan. The source ports will be set as untag ports of the vlan entry. And the IGMP control messages received from the member ports would … | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.4 | ||||||||||||
| swL2IGMPMulticastVlanReplaceSourceIPThe replace source IP of this multicast vlan. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.5 | ||||||||||||
| swL2IGMPMulticastVlanRangeNameThe name of multicast address range. When read, it shows NULL. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.6 | ||||||||||||
| swL2IGMPMulticastVlanRangeStateThis object is uesed to add or delete the specified multicast address range. when read it shows none(1); when set add(2) or delete(3),the swL2IGMPMulticastVlanRangeName should not be NULL. When set deleteAll(4… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.7.1.7 | ||||||||||||
| swL2IGMPMulticastVlanStateThis object can be enabled or disabled IGMP_snooping multicast VLAN. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.7.1.8 | ||||||||||||
| swL2IGMPMulticastVlanRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.9 | ||||||||||||
| swL2IGMPMulticastVlanUntagSourcePortThis object indicates the untagged member ports to add to the multicast VLAN. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.10 | ||||||||||||
| swL2IGMPMulticastVlanRemapPriorityThe priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be used. | Integer32r/w Constraints: range: 0-8 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.11 | ||||||||||||
| swL2IGMPMulticastVlanReplacePrioritySpecifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.11.7.1.12 | ||||||||||||
| swL2IGMPMulticastVlanTagMemberPortThis object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.7.1.13 |
swL2IGMPForwardingTable
table.1.3.6.1.4.1.171.11.70.6.2.11.8
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPForwardingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPForwardingTable'
The table containing current IGMP forwarding information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
Information about current IGMP forwarding information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState
of associated VLAN entry are all enabled.
this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState
of associated VLAN entry are all enabled.
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPForwardingVidThis object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.8.1.1 |
| swL2IGMPForwardingSrcIpThis object is identify source ip address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.8.1.2 |
| swL2IGMPForwardingGroupAddrThis object is identify group ip address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.8.1.3 |
| swL2IGMPForwardingPortMemberThis object indicates which ports are belong to the same multicast group, in per-Vlan basis. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.8.1.4 |
.1.3.6.1.4.1.171.11.70.6.2.11.9
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPMulticastVlanGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPMulticastVlanGroupTable'
The table containing the IGMP snooping multicast VLAN group information
Information about current IGMP snooping multicast VLAN group.
| Column | Syntax | OID |
|---|---|---|
| swL2IGMPMulticastVlanGroupVidThis object indicates the Vid of IGMP snooping multicast VLAN group. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.11.9.1.1 |
| swL2IGMPMulticastVlanGroupRangeNameThe name of multicast address range. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.171.11.70.6.2.11.9.1.2 |
| swL2IGMPMulticastVlanGroupHeadThe head of multicast address range. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.9.1.3 |
| swL2IGMPMulticastVlanGroupTailThe tail of multicast address range. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.9.1.4 |
swIGMPSnoopingGroupTable
table.1.3.6.1.4.1.171.11.70.6.2.11.11
·
1 row entry
·
5 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swIGMPSnoopingGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swIGMPSnoopingGroupTable'
The table contains the current IGMP snooping group information captured by the device.
Information about the current IGMP snooping group information which has been captured by
the device.
the device.
| Column | Syntax | OID |
|---|---|---|
| swIGMPSnoopingGroupVidThis object indicates the VID of the individual IGMP snooping group table entry. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.70.6.2.11.11.1.1 |
| swIGMPSnoopingGroupGroupAddrThis object identifies the group IP address which have been captured from the IGMP packet, on a per-VLAN basis. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.11.1.2 |
| swIGMPSnoopingGroupSourceAddrThis object identifies the source addresses. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.11.1.3 |
| swIGMPSnoopingGroupIncludePortMapThis object indicates the port list under INCLUDE mode. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.11.1.4 |
| swIGMPSnoopingGroupExcludePortMapThis object indicates the port list under EXCLUDE mode. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.11.1.5 |
.1.3.6.1.4.1.171.11.70.6.2.11.16
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IGMPSnoopingStaticGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IGMPSnoopingStaticGroupTable'
The table contains the current IGMP snooping static group information captured by the device.
Information about current IGMP snooping static group information captured by
the device.
the device.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2IGMPSnoopingStaticGroupVIDThis object indicates the VID of the current IGMP snooping static group. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.70.6.2.11.16.1.1 | ||||||||||||
| swL2IGMPSnoopingStaticGroupIPaddressThis object indicates the current IGMP snooping static group IP address. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.11.16.1.2 | ||||||||||||
| swL2IGMPSnoopingStaticGroupMemberPortListThis object indicates the current IGMP snooping static group Member Portlist. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.11.16.1.3 | ||||||||||||
| swL2IGMPSnoopingStaticGroupRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.70.6.2.11.16.1.4 |
swL2TrafficSegTable
table.1.3.6.1.4.1.171.11.70.6.2.14.1
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2TrafficSegTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2TrafficSegTable'
This table specifys the port just can forward traffic to the specific port list.
A list of information specifies the port with its traffic
forward list.
forward list.
Indexes
| Column | Syntax | OID |
|---|---|---|
| swL2TrafficSegPortThe port number of the logical port. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.14.1.1.1 |
| swL2TrafficSegForwardPortsThe port list that the specific port can forward traffic. | PortListr/w Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.14.1.1.2 |
.1.3.6.1.4.1.171.11.70.6.2.15.1
·
1 row entry
·
8 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2IpLimitedMulticastTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2IpLimitedMulticastTable'
This entity's per-port Limited IP multicast address range table.
A particular route to a particular destination, under a particular policy.
Once an entry be built,it shouldn't be modified.That is,it just support create and
delete action.
Once an entry be built,it shouldn't be modified.That is,it just support create and
delete action.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2IpLimitedMulticastPortIndexA port to config the limited multicast address. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.15.1.1.1 | ||||||||
swL2IpLimitedMulticastHeadobsolete The head of multicast address range. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.15.1.1.2 | ||||||||
swL2IpLimitedMulticastTailobsolete The tail of multicast address range. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.15.1.1.3 | ||||||||
| swL2IpLimitedMulticastAccessIt allow you to permit or deny multicast range. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.15.1.1.4 | ||||||||
| swL2IpLimitedMulticastStateEnable or disable limited multicast address for the chosen port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.15.1.1.5 | ||||||||
swL2IpLimitedMulticastDelStateobsolete Enable or disable delete limited multicast address for the chosen port. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.15.1.1.6 | ||||||||
| swL2IpLimitedMulticastRangeNameThe name of multicast address range. When read, it shows NULL. | OctetStringr/w Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.70.6.2.15.1.1.7 | ||||||||
| swL2IpLimitedMulticastRangeNameStateAdd or delete the specified multicast address range. When read, it shows other(1); When set add(2) or delete(3), the swL2IpLimitedMulticastRangeName should be set also, and it should not be NULL. When set deleteAll(4), … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.15.1.1.8 |
.1.3.6.1.4.1.171.11.70.6.2.15.2
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2LimitedMulticastAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2LimitedMulticastAddressTable'
A table contains the limited multicast address information.
The information of limited multicast address.
| Column | Syntax | OID |
|---|---|---|
| swL2LimitedMulticastAddressPortThe port index. | Integer32 Constraints: range: 0-65535 | .1.3.6.1.4.1.171.11.70.6.2.15.2.1.1 |
| swL2LimitedMulticastAddressRangeNameThe name of multicast address range. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.171.11.70.6.2.15.2.1.2 |
| swL2LimitedMulticastAddressHeadThe head of multicast address range. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.15.2.1.3 |
| swL2LimitedMulticastAddressTailThe tail of multicast address range. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.15.2.1.4 |
swL2VlanTable
table.1.3.6.1.4.1.171.11.70.6.2.17.1
·
1 row entry
·
11 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2VlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2VlanTable'
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
Information for a VLAN configured into the device by
(local or network) management, or dynamically created
as a result of GVRP requests received.
(local or network) management, or dynamically created
as a result of GVRP requests received.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2VlanIndexThe VLAN ID of the VLAN to be created. The range is 1 - 4094. | VlanId Type Constraints: range: 1..4094 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.1 | ||||||||||||
| swL2VlanNameThe name of the VLAN to be displayed. | OctetString Constraints: range: 0-32 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.2 | ||||||||||||
| swL2VlanTypeThe type of the VLAN to be displayed. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.17.1.1.3 | ||||||||||||
| swL2VlanMemberPortsA range of member ports to the VLAN. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.4 | ||||||||||||
| swL2VlanStaticPortsA range of static ports to the VLAN. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.5 | ||||||||||||
| swL2VlanStaticTaggedPortsSpecifies the additional ports as tagged. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.6 | ||||||||||||
| swL2VlanStaticUntaggedPortsSpecifies the additional ports as untagged. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.7 | ||||||||||||
| swL2VlanForbiddenPortsThe set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar contro… | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.8 | ||||||||||||
| swL2VlanCurrentTaggedPortsThe set of ports which are transmitting traffic for this VLAN as tagged frames. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.9 | ||||||||||||
| swL2VlanCurrentUntaggedPortsThe set of ports which are transmitting traffic for this VLAN as untagged frames. | PortList Type Constraints: range: 0..127 | .1.3.6.1.4.1.171.11.70.6.2.17.1.1.10 | ||||||||||||
| swL2VlanAdvertisementStateSpecifies the VLAN as able to join GVRP If this parameter is not set, the VLAN cannot be configured to have forbidden ports. This flag protocol VLAN is fixed to DISABLE. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.17.1.1.11 |
.1.3.6.1.4.1.171.11.70.6.2.18.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2dot1vProtocolGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2dot1vProtocolGroupTable'
A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification.
A mapping from a Protocol Template to a Protocol
Group Identifier.
Group Identifier.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2dot1vProtocolTemplateFrameTypeThe data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.18.1.1.1 | ||||||||||||
| swL2dot1vProtocolTemplateProtocolValueThe identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'sn… | OctetString Constraints: range: 2-2 | .1.3.6.1.4.1.171.11.70.6.2.18.1.1.2 | ||||||||||||
| swL2dot1vProtocolGroupIdRepresents a group of protocols that are associated together when assigning a VID to a frame. | Integer32r/w Constraints: range: 1-16 | .1.3.6.1.4.1.171.11.70.6.2.18.1.1.3 | ||||||||||||
| swL2dot1vProtocolGroupRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.70.6.2.18.1.1.4 |
.1.3.6.1.4.1.171.11.70.6.2.18.2
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2dot1vProtocolPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2dot1vProtocolPortTable'
A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
A VID set for a port.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2dot1vProtocolPortThe port number of the port. | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.70.6.2.18.2.1.1 | ||||||||||||
| swL2dot1vProtocolPortGroupIdDesignates a group of protocols in the Protocol Group Database. | Integer32 Constraints: range: 1-16 | .1.3.6.1.4.1.171.11.70.6.2.18.2.1.2 | ||||||||||||
| swL2dot1vProtocolPortGroupVidThe VID associated with a group of protocols for each port. | Integer32r/w Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.70.6.2.18.2.1.3 | ||||||||||||
| swL2dot1vProtocolPortRowStatusThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.70.6.2.18.2.1.5 |
swL2MulticastRangeTable
table.1.3.6.1.4.1.171.11.70.6.2.19.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2MulticastRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2MulticastRangeTable'
A table contains multicast address range information.
Information about multicast address range.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| swL2MulticastRangeNameThe name of multicast address range. | OctetString Constraints: range: 1-32 | .1.3.6.1.4.1.171.11.70.6.2.19.1.1.1 | ||||||||||||
| swL2MulticastRangeHeadThe head of multicast address range. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.19.1.1.2 | ||||||||||||
| swL2MulticastRangeTailThe tail of multicast address range. | SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.171.11.70.6.2.19.1.1.3 | ||||||||||||
| swL2MulticastRangeStateThis object indicates the status of this entry. | SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … | .1.3.6.1.4.1.171.11.70.6.2.19.1.1.4 |
swL2LoopDetectPortTable
table.1.3.6.1.4.1.171.11.70.6.2.20.2.1
·
1 row entry
·
4 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2LoopDetectPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2LoopDetectPortTable'
The table specifies the loopback detection function specified by port.
The table specifies the loopback detection function specified by port.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| swL2LoopDetectPortIndexThis object indicates the module's port number. The range is from 1 to the maximum port number specified in the module | Integer32 Constraints: range: 1-65535 | .1.3.6.1.4.1.171.11.70.6.2.20.2.1.1.1 | ||||||||
| swL2LoopDetectPortStateThis object indicates the loopback detection function state on the port. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.20.2.1.1.2 | ||||||||
| swL2LoopDetectPortLoopVLANThis object indicates the VLAN list that has detected a loopback. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.171.11.70.6.2.20.2.1.1.3 | ||||||||
| swL2LoopDetectPortLoopStatusThis object indicates the port status. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.20.2.1.1.4 |
.1.3.6.1.4.1.171.11.70.6.2.24.2
·
1 row entry
·
2 columns
Uses the d-link variant from
Command help
/opt/observium/mibs/d-link.
Walk swL2DhcpLocalRelayVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS3627-L2MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS3627-L2MGMT-MIB::swL2DhcpLocalRelayVLANTable'
This table is used to manage the DHCP local relay status for each VLAN.
This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.
corresponding DHCP local relay status.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
| swL2DhcpLocalRelayVLANIDThis object shows the VIDs of the current VLANS in the switch. | Integer32 Constraints: range: 1-4094 | .1.3.6.1.4.1.171.11.70.6.2.24.2.1.1 | ||||||
| swL2DhcpLocalRelayVLANStateThis object indicates the status of the DHCP relay function of the VLAN. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.171.11.70.6.2.24.2.1.2 |